We are looking for experienced Traffic Control Technicians to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$20- $2

Overview: Tire Technician – Part-Time – Woodruff RdDiscount Tire1408 Woodruff RdGreenville, SC 29607OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $15Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #powerhr12

For more than 30 years, Jennings Builders Supply has provided the highest quality home building materials, hardware and services to contractors and homeowners throughout Western North Carolina.A Brief OverviewThe Carpenter is responsible for performing carpentry tasks. This person will perform a variety of tasks in an assigned area as they construct, repair, restore, and install structural woodwork and related materials.What you will doAdhere to established safety rules and regulations by passing safety test and following all safety procedures; maintain a safe and clean environment.Communicate well with crew and foreman; follow directions provided by lead carpenter or foreman; and prioritize daily duties.Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.Provide required personal tools.Measure, calculate, and mark cutting lines on materials accurately, using ruler, pencil, chalk, and marking gauge; shape or cut materials to specified measurements, using hand tools, machines, or power saw.Square walls and install sheathing correctly.Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue; install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.Select and supply crew, carpenters and leads with materials.Use proper nailing procedures for all applications.Use hand, pneumatic and other power tools to measure, cut and install sheathing for wall and roof, and all wall components.Finish, inspect and ensure work complies with quality standards and expectations.Keep jobsite clean and safe.Comply with Company's attendance policy by maintaining regular and predictable attendance.Required For All JobsPerform other duties as assigned.Comply with all policies and standards.Adheres to Company's commitment to workplace safety.Education QualificationsHigh School Diploma or GED required.completion of an apprenticeship program, certificate or degree program at vocational school or community college (e.g. Certificate of Achievement in Carpentry Technology, an Associate of Applied Science in Carpentry-Building Trades or an Associate of Applied Science in Carpentry) preferred.Experience Qualificationsless than 1 year of carpentry experience in the commercial and/or residential sectors required.Skills and AbilitiesKnowledgeable of the standard methods, practices, principles, tools, and equipment used in the carpentry trade and its associated occupational hazards.Knowledgeable of the qualities, adaptability, and use of various woods and materials.Basic knowledge of state codes and procedures including energy codes. Must have good work ethic, attitude and be reliable. Solid basic math skills are necessary.Communicate, read, comprehend, and comply with Company's policies and procedures including safety and security. Understanding and commitment to a safe work environment in this "safety sensitive" position. Must be able to pass Safety test and follow all safety procedures.Available for overtime as needed.Licenses and CertificationsDL NUMBER - Driver License, Valid and in State along with reliable transportation required. Additional Potential Opportunities based on experience: Carpenter HelperCarpenter LeadJennings Builders Supply and Hardware , a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Req ID:454664Address: 3308 Hwy 226 S. Marion, NC, 28752Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!Maintenance Technicians play a crucial role in our operations by ensuring a safe, clean, and well-maintained environment. Additionally, you'll assist your manager in maintaining smooth operations to swiftly serve our customers. Your dedication significantly contributes to our customers' satisfaction and desire to return. No experience No problem! We will teach you!Job Functions:This is a customer-facing position with general customer service duties including, but not limited to, providing assistance, resolving issues, and ensuring a positive customer experience.Assisting store, restaurant, and truck care departments with general cleaning, maintenance, stocking, and customer service needs.Use of various tools and equipment to clean and maintain the overall facility operations to include, but not limited to, equipment repair and maintenance (HVAC systems, fuel systems, service trucks, refrigeration systems, etc.), pressure washing, plumbing repair, site inspections, and other assigned duties.Additional duties could include cross-training in other departments such as Store Cashier, Restaurant Cashier, Facility Maintenance, and Leadership Roles.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Ability to move, lift 25+ pounds. Ability to work in various temperatures.Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

IFM Pest Control SupportEnsures the pest control provider is qualified from a vendor qualification perspective, assigned training for the pest control provider (technicians and management) are current and up to date within the Pfizer and JLL training systems, personnel qualification requirements (job descriptions, signature logs, CVs, etc.) are documented and current based on Pfizer and JLL SOPsOversees pest observations reported by colleagues and contingent workers on site. Provides associated documentation and captured pest(s) to the licensed pest control technician for identification.Direct oversight for all pest control service and inspections on site.Creates work order to document inspection/service in Pfizer systems.Facilitates pre meetings to discuss any pests captured, updates from last service/inspection and review any special circumstances prior to service/inspection.Accompanies the licensed pest control technician to ensure service and/or inspection of interior and exterior pest control devices is performed as identified in the site pest control SOP for all required services and inspections.Maintains site pest control binder which includes the following but not limited to: SDS for each pest control chemical, Pest control provider licenses, certifications, training records (as applicable).Create Work Orders in EAMS to correct any noted or identified conditions during service and inspection. Prioritize work orders in Pfizer systems and track through completion.Ensure completion of all Pest Control Service Report(s) prior to leaving the site. Review and sign the printed Pest Control Service Report within three business days of the documented service / inspection.Complete and maintain training for the Responsible Person and Approver roles in eQMS system. Collaborate with Pfizer Rocky Mount quality team to create, track, maintain Pest Control Investigation Records and CAPAs in Pfizer’s QMS Quality System. Ensure timely creation and closure of all Pest Control related Investigation records.Supports any audit (internal and external) requests related to the pest control program on site.Work with Pest Control Service Provider to assess the facility before shutdown activities start.Performs quarterly and annual evaluation of pest control program and submit summary report, including recommendations, for review and approval to Pfizer Qualified Site Pest Control Coordinator and Quality.Coordinates and schedules annual site assessment of all buildings (interior and exterior) with Pfizer Qualified Site Pest Control Coordinator, Pest Control Service Provider/ Licensed Technician and Certified Entomologist. Create work orders in EAMs to correct any noted deficiencies or gaps. Collaborate with the Pfizer Qualified Site Pest Control Coordinator on any recommendations resulting from the annual assessment.Create an annual summary report based on outcome of annual assessment.Ensure all pest control related Preventative and Corrective Maintenance work orders in executed and completed on time.Collaborates with Pfizer Qualified Site Pest Control Coordinator to initiate change controls for the pest control program as required per Pfizer SOPs.Submits Drafting and Drawing request per Pfizer SOPs for adding or removing a permanent pest control device.Ensure all completed and signed pest control service reports are uploaded in Pfizer’s validated electronic document repository.Support the risk assessment process for pest control devices as required by Pfizer Pest Control SOP.Support continuous improvement opportunities and inspection readiness activities related to oversight of the self-inspection program for the pest control services delivered on site.Execute monthly inspections which includes but is not limited to documentation/report review, training compliance, walkthrough audit of the facilities interior and exterior, (devices, bait stations, entrance way doors, grounds/landscaping, etc.), adherence to SOP requirements, etc.Document findings from inspection, submit corrective work orders, share outcome of inspections with Pfizer Qualified Site Pest Control Coordinator.Knowledge, Skills & AbilitiesEducation/TrainingAssociates Degree or equivalent minimumHave a minimum of 3-5 years of applicable working experience in a pharmaceutical industry preferable related with Pest Control serviceExperience working in or supporting GxP environmentsFamiliarity with quality management systems, regulatory compliance, and supporting quality-related activities is essential for this role.EXCEL , WORD, POWER POINT, MAXIMOOther AbilitiesAble to communicate pest control requirements and processesStrong Customer Service skillsStrong Interpersonal skills

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

***** This posting is part of our ongoing effort to identify qualified candidates for future opportunities. While we may not be hiring immediately, we encourage you to submit your application for consideration when a position becomes available. *****Welcome to Mobile Auto Solutions (MAS)!MAS is seeking skilledAutomotive ADAS Technicians to join our growing team! Our technicians are the face of the company. This role comprises customer interaction, vehicle testing and repair, invoice generation, inventory control and service vehicle maintenance. Don’t miss out on an opportunity to grow with us!Salary: $60,000 - $95,000 a year, Depending on experience.Schedule: Full-Time Monday to Friday 8-5 pmWhy choose to work at MAS Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance effective your first day401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysPet insuranceContinuing Education OpportunitiesOpportunities for advancementResponsibilities include but are not limited to:Determines testing and analysis by communicating with shop representatives and reviews all estimates for repairPerforms diagnostic testing, programming, ADAS calibrations and analysisPerforms wiring repairsAdvises shop of needed repairsKeeps inventory of stock, communicating with support staff for needed orders and verifying order receiptsWrites, prints and emails service invoicesCollects signature or payment for work performedDelivers completed invoices and payments to office in orderly manorKeeps shop equipment operating by following operating instructions, troubleshoots breakdowns; maintains supplies; performs preventative maintenance; advises management of repairs; keeps Google Drive up to dateCollaborates with teammates according to PPT guidelines to schedule/complete jobsOther duties as assignedQualifications include but are not limited to:Knowledge of OE scan toolsAbility to learn new tools as neededKnowledge of wiring repair proceduresAbility to service A/C systemsPossesses diagnostic skills in the automotive tradeBasic computer knowledge including using email, spreadsheet and messaging systemsWilling and able to update job knowledge by participating in educational opportunities, reading technical publications and the likeMust possess high school degree or GED equivalent4-10 years related service technician experience requiredMAS is proud to be an equal-opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.Please note that this job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice.The physical demands of your job must be met to perform the job's essential functions successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$60,000 - $95,000 / Yearly

Overview: Tire Technician – Part-Time – Woodruff RdDiscount Tire1408 Woodruff RdGreenville, SC 29607OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $15Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #powerhr12

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$60,000 - $150,000 /yr.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment