Greeneville, TN 37743 • (23.9 miles) • Full Time • 10/29/2026

Kelly Services is seeking qualified Assembly candidatesto work at John Deere in Greeneville TN! This is a unique contract position working 6-12 months with the possibility for permanent hire. This is a wonderful entry level opportunity for those with a passion for manufacturing John Deere products. To make this unique opportunity yours, please apply here,contact Chris G. @ and mention John Deere. Salary/Pay Rate/Compensation: $18.00 per hour on 1st shift - averages $21 with bonus $19.00 per hour on 2nd shift - averages $22 with bonus 15% Average Weekly Production Bonus Weekly Pay! Shifts: 1st shift - Monday thru Friday - 6am-3pm 2nd shift - Monday thru Friday - 3pm-12:00am Job Summary: Performs semi-skilled production activities, production support activities and clerical activities necess

Swannanoa, NC 28778 • (16.6 miles) • Full Time • $18.00 / hr • 10/21/2026

The Greer Group is recruiting for an Assembler II to join a manufacturing team in the East Asheville area! This is a great opportunity for someone with previous assembly experience who enjoys hands-on work, pays close attention to detail, and takes pride in producing quality products. In this role, you’ll assemble mechanical and electronic components, work with cables and circuit board products, use hand and power tools, and perform quality checks to make sure finished products meet specifications. If you have a steady hand, good attention to detail, and enjoy working with your hands, we’d love to hear from you! Pay: $18.00 per hour Location: East Asheville, NC What You’ll Do Assemble mechanical and electronic components according to work instructions and assembly drawings. Build cabinets

Hendersonville, NC • (35.2 miles) • Full Time • $17.50 to $25.00 / hr • 10/9/2026

The employee works as a member of an assembly line group attaching one unit to another and passing the unit along for further assembly. Compensation is adjusted within the noted range to reflect current skills upon hire. Unskilled Assembler: Essential Job Functions: Assemble standard assemblies and subassemblies using process equipment as directed by engineering drawings and manufacturing routers (or MWO). Properly identify products and processes, perform the required job duties as instructed, along with understand the impact on compliance of the Ex, IRIS, TS, and ISO Products/Processes (Knowledge/Competence/Awareness). Knowledge, Skills, and Abilities: Can use small hand tools such as air tools, wire cutter, needle nose pliers, ruler and wire strippers. Requires use of preparatory machine

Marion, NC 28752 • (29.8 miles) • Full Time • $19.00 / hr • 10/29/2026

Chipton-Ross is seeking multiple Fill Operators for a contract opportunity in Marion, NC. BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE) Must have basic English written and oral communication skills adequate to communicate with other team members. Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings. Must be able to perform basic mathematics Possess or be able to obtain Inspector Certification POSITION RESPONSIBILITIES The Operator, Fill is an Hourly Non-Exempt position which contributes to our mission of saving and sustaining lives by inspecting, printing, filling and sealing flexible containers which hold IV therapies, premixed drugs, renal therapies and other sterile solutions. Essential Job Dutie

Marion, NC • (32.4 miles) • Full Time • 10/28/2026

Hiring Machine Operators ASAP!! 1st, 2nd and 3rd shift $17.50- $21/hr. Marion, NC Job Responsibilities Operate, monitor, and adjust manual and automated filling equipment and machines using HMI controls, photo-eyes, sensors, and other control devices. Perform scheduled quality checks on in-process and finished product, identify deviations from specifications, and take appropriate corrective action, including stopping production when necessary. Document all required production, quality, and process information accurately on manufacturing logs and in the POMS system. Set up, load, and replenish production supplies using a powered industrial truck at a pace that supports production requirements. Execute batch changes, code changes, tank changes, and sub-lot changes as required by the producti

Greeneville, TN 37745 • (31.5 miles) • Full Time • $90,000 to $125,000 / yr • 10/23/2026

Sr Manufacturing Engineer This Jobot Job is hosted by: Sean Copeland Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $125,000 per year A bit about us: Global manufacturer headquartered in the US Why join us? Full benefits: Medical, Dental, Vision 401 (K) with generous company match Generous Paid time off (PTO) Vacation, sick, and paid holidays Life Insurance coverage Job Details Responsibilities: Lead development and optimization of new and existing production processes to improve efficiency, capacity, and cost. Lead complex troubleshooting and root cause analysis for production and quality issues. Develop and implement process flows, layouts, and line strategies for new or transferred production lines. Play a lead technical role i

Hendersonville, NC • (35.2 miles) • Full Time • 10/29/2026

Electrical Engineer Location: Spindale, NC (Company Headquarters) Job Type: Full-Time, In-person Salary: $110,000 – $160,000 (Based on Experience) *$15,000 Sign-On Bonus *Relocation Assistance Available for Highly Qualified Candidates Lead and Strengthen the Engineering Team Behind Landmark Electrical Construction Projects Fountain Services is seeking an experienced Electrical Engineer to lead and strengthen our Engineering Department supporting major commercial and industrial electrical construction projects throughout the Southeast. This is a department leadership role focused on people, technical guidance, problem-solving, quality, and continuous improvement . You will lead a team of approximately 8–10 engineering professionals while partnering closely with Project Management, Estimatin

Arden, NC 28704 • (25.3 miles) • Full Time • 10/29/2026

Company Description TUTCO Farnam Custom Products is seeking a motivated Electrical Engineer or Electrical Engineering Technology Graduate to join our engineering team in Arden, North Carolina. This position is ideal for recent graduates and early-career professionals from two-year and four-year engineering programs who want hands-on experience designing industrial heating systems, control panels, and automation solutions. The role includes electrical design, control panel development, CAD-based engineering, and support of custom-engineered heating products. Job Description Duties What You'll Do Design electrical schematics, wiring diagrams, and control panel layouts. Develop and support PLC-based control systems for industrial heating and process applications. Create and modify PLC program

Asheville, NC 28801 • (16.2 miles) • Full Time • 10/29/2026

RVE, an Ardurra Company, is seeking a Mechanical HVAC Intern in our Asheville, NC office. This candidate will work under general supervision and perform assignments of limited scope that require the application of standard engineering techniques, procedures, and criteria in carrying out a sequence of related tasks. Projects may include HVAC system design, heating and cooling load calculations, ductwork and piping systems, equipment selection, energy efficiency improvements, building mechanical systems, and related infrastructure improvements. The intern will gain hands-on experience supporting the design and analysis of mechanical systems for a variety of building and infrastructure projects. Primary Function: Under supervision, the Mechanical HVAC Intern will support a variety of mechanic

Asheville, NC 28801 • (16.2 miles) • Full Time • 10/28/2026

At Optima Engineering , an employee-owned MEP engineering consulting firm, we focus on delivering high-quality mechanical, electrical, plumbing, fire protection, and technology design solutions for buildings across the Southeast. Our projects include higher education, municipal, K-12, and commercial facilities. We are looking for a skilled and dedicated Electrical Engineer to join our team and help us continue to provide thoughtful and efficient designs for our clients. Requirements Registration as a Professional Engineer (PE) in North Carolina Bachelor’s degree in Electrical Engineering or related field. Minimum of 5 years of experience in MEP building systems design for higher education, municipal, K-12, and/or commercial facilities. Proficiency in Revit and/or AutoCAD required. Strong c

Asheville, NC 28801 • (16.2 miles) • Full Time • 10/28/2026

Job Description: We are looking for an Automation Engineer to support manufacturing automation, robotics, and controls at the Pratt & Whitney manufacturing site in Asheville, NC. The candidate will help develop and implement automation strategies, improve manufacturing processes, and standardize PLC code and HMI screens. Key Responsibilities: Support automation requirements for new product development. Develop and execute manufacturing methods and identify process optimization opportunities. Collaborate with Manufacturing and Quality Engineering teams to improve processes and data acquisition. Establish and enforce site standards for controls, robotics, and automation. Support Ethernet networking and troubleshoot hardwired components. Develop and maintain standard engineering procedures an

Flat Rock, NC • (39.1 miles) • Full Time • $18.00 to $21.00 / hr • 10/28/2026

SUMMARY Set up and operate a wide range of grinding equipment to generate geometries which cannot be done on other equipment because of size, tolerance, or shape. Grinding equipment and operations vary from simple to complex for the manufacturing of ceramic inserts or cutting tips and ceramic specials to precision tolerances. Operate to applicable production standards and quality standards. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Set up and operate a wide range of grinding equipment. Read and interpret router, blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, set-up procedures, control settings, and machining methods and sequences. Write program for a variety of different cutting tips. Tro

Flat Rock, NC 28731 • (38.5 miles) • Full Time • 10/27/2026

What You’ll Be Doing TERREPOWER is seeking a dedicated individual to join our team as Repair Specialist. If you are a dedicated individual interested in joining a growing company in the automotive parts industry, we want you on our team! As a Repair Specialist, you will perform the production duties below: Review each product to determine the required repairs Ensure you have the proper tools and materials required to repair the product to an insurance quality standard For each repair, you may be required to cut, trim, file, bend, or smooth parts to ensure proper standards are met Ensure quality control standards are met Adhering to assembly safety standards Work with team members to identify and develop improved methods of repair Comply with all safety standards and requirements to assure

Asheville, NC 28804 • (12.5 miles) • Full Time • 10/27/2026

Print & Laser Production Technician (No Experience Needed - 3-Day Weekends) $16/hr starting pay ? $17/hr after 90 days Schedule: Monday-Thursday, 6:00 a.m.-4:30 p.m. Enjoy a 3-day weekend every week while learning valuable technical skills. We are looking for a dependable, computer-comfortable individual to operate industrial printing and laser-cutting equipment. No experience required?we provide paid training. What You'll Do Operate industrial flatbed printers and laser cutters Inspect printed materials for quality and color accuracy Prepare materials for production Troubleshoot basic computer and file-sharing issues Update digital production files Maintain inventory and production records Follow quality standards and production procedures Other general duties as required What We're Looki

Arden, NC 28704 • (25.3 miles) • Full Time • $26.50 to $30.00 / hr • 10/27/2026

Electrical Quality Assurance and Diagnostics TechnicianAre you the person who finds issues others miss? Imagine powering up a newly built panel, following the evidence in the schematics, and uncovering a subtle sequencing fault before it reaches a customer site. That’s the impact you’ll havevalidating that each structure, unit, control system, and assembly performs exactly as engineered. Your mission Own the final validation process. Build test plans, execute electrical and mechanical evaluations, and ensure every deliverable is fully functional, fully documented, and ready to ship. How you’ll contribute Use drawings, specs, and instructions to set up, inspect, and test equipment. Conduct mechanical, electrical, insulation, and sequence tests across assemblies and components. Diagnose fail

Canton, NC 28716 • (32.3 miles) • Full Time • $20.50 to $22.50 / hr • 10/27/2026

Compression Molding Press Technician Location: Canton, NC Employment Type: Full-Time | Weekly Pay + Benefits A day in this role You clock in, review your work instructions, and confirm your press and labeling scan gun are ready. As parts cycle from the molding press, you carefully inspect each piece, assemble subcomponents, apply labels, and package to spec. You record production counts, quality checks, and scrap in the system, keeping pace without compromising standards. When something sounds off, you flag the issue and alert the lead, keeping safety, housekeeping, and environmental rules front and center. By shift end, your area is organized, the paperwork is accurate, and your team is set up for a smooth handoff. Role highlights Hands-on work in a modern plastics molding department with

Arden, NC 28704 • (25.3 miles) • Full Time • $27.00 to $30.00 / hr • 10/25/2026

Description: Arcadia Beverage is seeking a proactive and detail-oriented Maintenance Planner to support our continued growth, new mixing initiatives, and onboarding of exciting new customer partnerships in 2025. This role is critical to ensure our equipment and maintenance systems are running efficiently and reliably as we expand our production capabilities. The Maintenance Planner will coordinate preventive and corrective maintenance schedules, support capital project planning, and work cross-functionally to drive up time, safety, and quality in a fast-paced beverage manufacturing environment. If you thrive on building systems, solving problems, and contributing to a values-driven culture, we want to hear from you. What We Do: Arcadia is a people-first organization. We exist to care for e

Marion, NC 28752 • (29.8 miles) • Full Time • 10/25/2026

Overview CTG is seeking to fill a Lab Investigation Lead opening for our client in Marion, NC. Location: Marion, NC Duration: 6 months with possible extension Duties: Determine scope, product impact, root cause, and corrective/preventive actions for microbial excursions including surfaces, viable air, non-viable air, water, bioburden, and endotoxin testing results. Expedite identification of potential root causes and implement immediate mitigation actions. Assemble cross-functional teams, conduct interviews, and observe operations to complete investigations. Lead process improvement CAPA projects to ensure timely and effective closure of investigations. Foster collaborative relationships to focus on high-quality investigations and effective corrective actions. Manage and close investigatio

Asheville, NC • (17.8 miles) • Full Time • $90,000 to $110,000 / yr • 10/24/2026

Position Summary: Responsible for managing site safety, health, and construction quality-control activities primarily on projects for the U.S. Department of Veterans Affairs (VA) . Ensures work complies with contract documents, applicable OSHA requirements, federal safety standards, VA requirements, and the contractor’s approved safety and quality-control plans. Typical Responsibilities: Serve as the project’s Site Safety and Health Officer (SSHO) . Implement and enforce the site-specific Accident Prevention/Safety Plan. Conduct daily safety inspections and document deficiencies and corrective actions. Lead safety meetings, toolbox talks, and employee/subcontractor orientations. Review subcontractor Activity Hazard Analyses (AHAs) and ensure required controls are followed. Monitor OSHA and

Asheville, NC 28801 • (16.2 miles) • Full Time • 10/24/2026

Are we the road to your future? We are currently searching for talented CEI Inspectors to support our Carolinas Region statewide in North Carolina . This position welcomes candidates who are willing to commute from South Carolina to work in the state of North Carolina. To be considered for this position, applicants musthave, at minimum, an Associate's degree in an applicable area of Engineering Technology, Survey Technology or a related curriculum from an appropriately accredited institution. The successful candidate will perform technical duties supporting engineers and other professionals in the administration of highway construction. Such areas include, construction inspection, project roadway/structure inspection, materials testing, project surveying, and program/regulatory compliance.

Asheville, NC 28801 • (16.2 miles) • Full Time • $92,000 to $151,800 / yr • 10/24/2026

POSITION SUMMARY: Established forward thinking Engineering firm located in Durham, North Carolina is seeking an engineer with 5+ years of relevant experience in HVAC/mechanical system design as well as plumbing and fire protection systems design for educational, commercial and industrial facilities to expand its Asheville, North Carolina Office. PRIMARY DUTIES: Design of HVAC systems for commercial, industrial, and education facilities Hydronic system (chilled and hot water) piping design as well as ductwork and mechanical equipment sizing is also required. Understands construction plan documentation including architectural, structural and MEP systems Knowledge of HVAC, Fire Protection, and Plumbing Preparation of construction documents including drawings, specifications, calculations, and

Canton, NC 28716 • (32.3 miles) • Full Time • 10/24/2026

Are you looking for a career in Manufacturing? ConMet - Canton location is currently looking for Press Operators to support our Molding Department operations. What You Will Do: Inspect, assemble, label and pack parts according to work instructions. Record production and scrap information. Maintain production standards. Maintain a clean workstation. Notify supervisor/lead of unresolved problems with items or equipment. Comply with all plant safety and environmental policies and procedures. What You Need to Be Successful: High school diploma or general education degree (GED) strongly preferred Minimum twelve months of related experience and/or training Ability to access information on a computer and operate a labeling scan gun Compensation & Benefits Competitive compensation Comprehensive em

Waynesville, NC 28786 • (35.5 miles) • Full Time • $33.00 / hr • 10/24/2026

EMPLOYEE STATUS: Hourly, non-exempt PURPOSE: Is accountable for performing maintenance on our facility and production equipment to maximize our overall equipment effectiveness (OEE). AREA OF PROGRAM RESPONSIBILITY: Operations ESSENTIAL DUTIES: Performs preventive and corrective maintenance on production, support, and facilities equipment. Troubleshoots issues with production, support, or facilities equipment. Demonstrates the ability to troubleshoot, program, and repair equipment controls and automation. Assists technicians with equipment training to bring proficiency and the opportunity for advancement to other associates. Identifies opportunities for maintenance improvements or activities during inspections or daily Gemba walks. Identifies parts that are required to perform maintenance a

Hendersonville, NC • (35.2 miles) • Full Time • 10/23/2026

VYVE BROADBAND JOB DESCRIPTION Broadband Professional/Expert (BT IV-V) Who are we? Vyve Broadband is a leading broadband Internet provider serving rural communities across 16 states. Vyve Broadband offers a range of broadband, fiber connectivity, cable television and voice services for commercial and residential customers including high-speed internet (up to Vyve Gig), digital HD video and voice services. For commercial customers, Vyve offers optical Ethernet, PRI and hosted voice services to the business community. Come Thrive with Vyve! JOB SUMMARY Undergeneral supervision, responsible for preventive and/or demand maintenance and repair of the hybrid fiber coax network (HFC) including all of its associated equipment in accordance with the company’s Engineering Standards. Perform maintena

Swannanoa, NC 28778 • (16.6 miles) • Full Time • 10/23/2026

Basic Function: Performs incoming, in-process, and finished goods inspections according to prints and procedures. Assist with customer/vendor returns and related data entry. Significant Responsibilities: Performs specific job responsibilities: Perform incoming, first article, finished goods, and customer returns inspections for compliance to specifications and auditing. Assist with receiving incoming materials and match to purchase orders through utilization of ERP system. Processes customer returns, returns to suppliers, and all associated paperwork. Ensure incoming material meets specific requirements per blueprint. Ensure incoming material is moved to proper location. Ensure that all paperwork and inspection reports are accurate and complete. Maintain manual and electronic record filing

Asheville, NC 28801 • (16.2 miles) • Full Time • 10/21/2026

Industrial Inspection & Analysis is searching for an ANSI Inspector to join our Lifting Services team in North or South Carolina . PositionOverview The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure that they are in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including: Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper co

Asheville, NC • (17.8 miles) • Part Time • 10/21/2026

Job Description The starting pay range for this position begins at $18.62/hour and is based on the level of qualifications and relevant experience above the minimum requirements. Flex: A position working an average of 20-29 hours per week (between 1000 - 1559 hours/year). Schedule can vary, but is generally 8:00am - 4pm, Friday through Monday The Maintenance Engineer II position will be responsible for repairs, and maintenance, upkeep and operations of materials, supplies and components of the Inn. The Maintenance Engineer II will be working on interior and exterior projects that include plumbing, painting, minor carpentry, electrical and HVAC work. The position will also assist in other areas of Maintenance as assigned, such as preventative maintenance of Inn public areas and guest rooms.

Spruce Pine, NC 28777 • (27.6 miles) • Full Time • 10/21/2026

Company Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provides day-to-day monitoring and basic plant

Asheville, NC • (17.8 miles) • Full Time • $30.43 to $45.51 / hr • 10/20/2026

NCDOT CEI Technician / Senior Construction Inspector Location: Asheville, NC and Surrounding Areas About Us Goins Sweitzer Engineers and Consultants is a multi-modal, transportation-focused consulting firm offering construction management solutions to our clients’ infrastructure project needs through the delivery of responsive, high-quality construction and engineering inspection (CEI), contract administration, construction materials management, utility coordination, training, value analysis, cost estimating, risk assessment, and specialized project and program management consulting services. We are committed to delivering exceptional services and creating a truly outstanding experience for both our employees and our clients. Our firm was built with the vision of fostering a work environme

Weaverville, NC 28787 • (7.1 miles) • Full Time • 10/20/2026

Job Title: Manufacturing Engineer Location: Weaverville, NC Reports to: Engineering Manager Employment Type: Full-time Seniority Level: Mid-Level Industry: Manufacturing | Mechanical Power Transmission Components | Engineering Services Job Function: Manufacturing Engineering | Process Improvement | Equipment Development Job Summary: Plan, direct, and support manufacturing processes and personnel in a CNC machining environment. Research and resolve production problems, establish and implement standard requirements for equipment, tooling, and methods. Determine best utilization of equipment, material, and personnel. Key Responsibilities: Equipment Development and Implementation Develop and implement new production equipment to enhance manufacturing capabilities. Ensure equipment meets produc

Arden, NC 28704 • (25.3 miles) • Full Time • $20.00 / hr • 10/20/2026

Survey Instrument Operator Arden, NC | Surveying Start Your Career in the Field FEI is seeking a Survey Instrument Operator to join our land development surveying team. This is a hands-on, entry-level position designed for individuals who enjoy working outdoors and want to build a long-term career in surveying. You’ll work alongside experienced Survey Party Chiefs, gaining real-world experience with equipment, field operations, and job-site coordinationall while contributing to projects that shape communities. What You’ll Do Support Field Operations Assist the Survey Party Chief with daily surveying activities Work as part of a field crew to keep projects moving efficiently Follow direction and contribute to a safe, productive work environment Learn the Trade Gain experience with: Boundary

Arden, NC 28704 • (25.3 miles) • Full Time • 10/20/2026

As one of the nation's premier wall and ceiling specialty contractors, Precision Walls, Inc. (PWI) offers you an opportunity to join our team. Make a difference and promote the progress of construction! We are seeking experienced Division 10/12 Foreman in commercial work which includes but not limited to toilet partition, toilet accessories, fire extinguisher/ cabinets, visual displays, wall protection and numerous other miscellaneous items. Essential Duties and Responsibilities: Understands how to install bathroom partitions and accessories. Experience with all types and ranges of commercial Items. Measures and marks surface to hang work according to blueprints and drawings. Inspects wall surfaces for imperfections. Ability to work independently on jobsites. Oversee less experienced insta

Hendersonville, NC 28791 • (32.6 miles) • Full Time • 10/17/2026

Celebrating 40 years of success and continual growth, ESP Associates is currently seeking an experienced Survey CAD Technician to join our team in Hendersonville, NC. We’re proud to offer more than a place to build your career; we offer a team you can be part of. Our multidisciplinary environment brings together professionals across engineering, surveying, planning, environmental, geosciences, SUE, and CEI, with plenty of opportunities to connect beyond the workday. From team outings and volunteer events to company-wide step challenges, summer celebrations, and friendly competitions, there’s always an opportunity to get involved, get to know your coworkers, and have a little fun along the way! As a Survey CAD Technician , you will be responsible for survey computations, platting, and draft

Maggie Valley, NC 28751 • (39.1 miles) • Full Time • 10/15/2026

Returning Staff – Winter 2026/2027 Season Cataloochee Ski Area, Maggie Valley, NC Returning Staff Only Are you ready to come back for another amazing season on the mountain? This application process is exclusively for RETURNING STAFF who worked at Cataloochee Ski Area in a previous season and are interested in rejoining our team for Winter 2026/2027. If you’ve never worked at Cataloochee before, please do not apply using this posting. Your application will not be considered. WHO SHOULD APPLY TO THIS POSTING: Former employees of Cataloochee Ski Area (within 3 years) Staff who completed a past winter season Past team members looking to return in any role this upcoming season WHO SHOULD NOT APPLY TO THIS POSTING: ? First-time applicants ? Individuals who have never worked at Cataloochee Ski A

Asheville, NC 28803 • (20.7 miles) • Full Time • 10/15/2026

Summary The Applied AI Specialist uses artificial intelligence to solve practical business problems. The work is applied rather than theoretical: building tooling that assembles reporting from the company's corporate operating systems so that business analytics improve, and developing tools that make each department's day-to-day work move faster and with better information. This is an individual contributor position for someone who can take a defined problem and deliver a working, documented, production-ready solution. The Director of Business Intelligence sets departmental technical standards and carries governance and vendor decisions. Within those standards the person in this seat owns the design of their assigned solution areas. Essential Duties and Responsibilities Applied AI Developm

Fletcher, NC 28732 • (26.8 miles) • Full Time • $27.50 to $30.50 / hr • 10/14/2026

Benefits: Paid Holidays Life insurance 401(k) 401(k) matching Dental insurance Health insurance Paid time off Parental leave Vision insurance A general foreman will be responsible for coordinating operations and overseeing workers at job sites. As a point of reference for both workers and supervisors, the general foreman will be a key person for a completion of a project. Using leadership skills and extensive experience in the industry, a general foreman will direct the work of others and ensure safety policies are being adhered too. At times, employee will be required to assist other facets of our business. Qualifications: · Experience working in an industrial environment · In-depth knowledge of construction procedures, equipment and OSHA guidelines · Excellent organizational and leadersh

Arden, NC 28704 • (25.3 miles) • Full Time • $29.00 to $30.00 / hr • 10/14/2026

Must be willing to travel/temporarily relocate to Kinston, NC. Why Manufacturing Professionals Choose AAA USA: Competitive Pay. Overtime Opportunities. Long-Term Aerospace Programs. Relocation Assistance Available. Referral Programs. Medical, Dental & Vision Benefits. 401(k) with Company Match. Paid Time Off & Paid Holidays. AAA USA is actively hiring experienced Machine Operators to support major manufacturing program. The Machine Operator will set up and operate a variety of machine tools to make parts, mechanisms, tools, or machines to exacting tolerances and dimensions. Essential Job Functions: Sets up and operates manual and CNC machine tools to manufacture precision parts while maintaining required tolerances and specifications. Reads and interprets blueprints, sketches, and engineer

Mills River, NC 28759 • (30.8 miles) • Full Time • 10/9/2026

Description: POSITION SUMMARY: The Shop Technician provides timely completion of repairs and maintenance to various construction equipment and machinery within shop at Ascendum Branch locations, according to established procedures, while maintaining good working relationships with customers and co-workers. FLSA STATUS: The U.S. Fair Labor Standards Act (FLSA) requires employers to classify their employees as being either exempt or non-exempt for the purpose of being paid overtime wages. The essential duties of this job are such that the employee is classified according to the FLSA as a Non-Exempt employee. EQUAL OPPORTUNITY: Ascendum makes recruitment, employment, promotional and all other People and Culture decisions without regard to race, color, religion, national origin, age, sex, gend

Asheville, NC 28803-2828 • (17.8 miles) • Full Time • $12.50 to $14.00 / hr • 10/8/2026

Shop Technician Strickland Brothers 10 Minute Oil Change Join a thriving team where your growth is our priority! At our company, your career path is not just a journey; it’s a fast track to success. We’re committed to advancing our employees' careers and recognizing talent at every level. As a Shop Technician, you’ll be part of a fast-paced, team-driven environment where you learn real skills, work with your hands, and see the impact of your work every day. Many of our leaders started right here in entry-level roles and built successful careers through hands-on learning, teamwork, and performance. This is more than a job. It’s a chance to build a career. If you’re ready to elevate your career and make a meaningful impact, we want you on our team! Why Team Strickland: We invest in our team

Flat Rock, NC 28731 • (38.5 miles) • Full Time • 10/8/2026

Quality Assurance Specialist – Full Time About the Position: As a Quality Assurance Specialist , you will play a critical role in ensuring product quality and process consistency across manufacturing operations. This role supports quality assurance efforts through process audits, document control, quality inspections, training support, and analysis of product returns and quality issues. Quality Assurance Specialist serve as a first line of response for production quality concerns and work closely with production teams to identify defects, investigate root causes, and support corrective actions. The role requires strong attention to detail, a continuous improvement mindset, and the ability to collaborate across departments to maintain and improve quality standards. The ideal candidate has e

Asheville, NC • (17.8 miles) • Full Time • 10/8/2026

Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 5,000+ employees across 40+ companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Job Title: Indusrial Technician - Passivation Location: Atlanta, GA Hiring for all shifts (1st, 2nd, and 3rd shift) Note: This project is in Georgia, but candidates should expect to travel to various project locations.Candidates must be willing to travel to Lucedale for training and to any loc