Greenville, NC 27834 • (18.4 miles) • Full Time • $15.00 / hr • 10/18/2026

Job Info Job Location: Greenville, North Carolina Route Type: Local Type of Assignment: Dedicated Transmission Type: Automatic Job Requirements Experience: 0+ (includes CDL students) Handling: Light Touch Additional Information Warehouse/Non CDL Driver w/Medical card - FT $700 avg TransForce is seeking a Warehouse/Non CDL Driver in Greenville, SC. This position offers steady work, reliable scheduling, and the opportunity to work with a driver-focused team. Warehouse/Non CDL Driver w/Medical card Monday - Friday 7AM - 5PM Pay: $15 Per hour + OT and Benefits Route Type: Local home daily routes Handling: Basic Warehouse/Delivery Pulling Orders , Checking in Stock and Delivering orders Automatic Van or Box Truck Forklift and Pallet Jack Warehouse/Non CDL driver Minimum Requirements: License: V

Zebulon, NC 27597 • (37.4 miles) • Full Time • 10/19/2026

Safely operate and/or have the ability to operate various equipment including forklift, bobcat, backhoe, track hoe, compactor and/or steer equipment to bale, load and move waste material. Key Responsibilities: • Operate necessary equipment to bale and load waste material into trailers. • Perform inspection and maintenance checks of equipment daily. • Grease/lubricate equipment, check and add fluids to equipment daily • Operator will steer, guide and or drive the above listed equipment at the assigned site, if the equipment is used at the particular site(s) using steering wheel, shifters, levers, buttons and pedals. • Operator will substitute for another operator if someone is absent from the work crew or as needed/required. • Operator will clean trash from tra

Greenville, NC • (19.9 miles) • Full Time • 10/27/2026

Position Purpose: Substation Technician IIIis a skilled position in the construction,maintenanceand repair ofsubstationequipment/systems. This position works at various locations and may alsoberequiredto travel to another state depending on customer demands. KeyResponsibilities: Willassistwithbuilding concrete foundations, ground grids, and steel erectionBuswork(high and low voltage) Assistin the testing of gas driven internal combustion engines that power electric generators Assistin collection and monitoring emissionscontroldata and troubleshooting engines, generators, and switchgear. Ability to perform lightsubstation work. Reading and interpreting drawings and blueprints Digging trenches, climbing poles, towers etc. to perform duties Troubleshooting and repairingsubstation equipment/sy

Zebulon, NC 27597 • (37.4 miles) • Full Time • $13.50 / hr • 10/27/2026

Temp to Hire Role - Quick Start! If you enjoy working in the afternoon/evening and have experience working in the heat in a warehouse setting--this may be the job for you! We are looking for a CNC Machine operator to work at a fast-paced manufacturing warehouse in Zebulon, NC. This position is responsible for operating production machinery, communicating with supervisor/team, and keeping up with a fast paced work flow. Entry-level friendly. Spanish & English friendly. Position: Machine Operator Shift: 2nd shift, M-F 3pm-1:30am; optional OT weekly Pay Rate: Base $14.50/hr. PLUS $100 attendance bonus paid every 2 weeks Pay Schedule: Base pay, paid weekly Responsibilities include: Operate and make basic adjustments to production machinery Conduct visual inspections to maintain quality standar

Tarboro, NC 27886 • (10.1 miles) • Full Time • 10/25/2026

WAREHOUSE WORKERS WANTED Location: Tarboro, NC Position Type: Full-Time Competitive salary of $19/hr (depending on qualifications and experience.) Are you a reliable, safety conscious individual with forklift experience? Join our growing team! We are looking for warehouse workers to help keep our operation running smoothly and efficiently. Prudential Stainless & Alloys, LP, is a leading master distributor dedicated to servicing metal service center customers across the USA, Canada and abroad. We provide a wide range of products, specializing in unusual and difficult to find items. We have been in business for 76 years and are now moving to North Carolina! We are excited to share that our new location is currently under construction. At Prudential Stainless & Alloys, LP, we pride ourselves

Zebulon, NC 27597 • (37.4 miles) • Full Time • $22.00 to $27.00 / hr • 10/25/2026

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance Warehousing Lead Who we are: Next Century Spirits (NCS), headquartered in Zebulon, North Carolina, is a full-service distilled spirits and marketing company specializing in the development of spirits for its owned brands, private label clients, and bulk supply. The NCS portfolio includes Pocho Fino Tequila, Nue Vodka, Blue Chair Bay Rum, Bear Fight Whiskey, Numbskull – a cool mint and chocolate-flavored whiskey, Creek Water American Whiskey, Caddy Clubhouse Cocktails, Calamity Gin, and Henderson Whiskey. NCS-owned brands have earned over 35 gold medals in industry competitions, and in 2023, the company was named North Carolina Distillery of the Ye

Zebulon, NC 27597 • (37.4 miles) • Full Time • 10/24/2026

1K Sign-On Bonus Opportunity Position Summary: Sunrock is seeking a highly skilled Heavy Equipment Operator to join our grading and utility operations team. This is an expert-level role requiring 5+ years of experience OR over 10,000 hours operating heavy equipment in civil construction. The Heavy Equipment Operator 3 is expected to operate equipment independently, perform finish and fine grading, and support complex sitework tasks with minimal supervision. Essential Duties & Responsibilities: Operate heavy equipment at an expert level: excavators, dozers, motor graders, loaders, skid steers, and trenching equipment Perform precise finish grade and fine grade work for grading, utilities, and civil construction projects Interpret grade stakes, GPS grade control, cut/fill requirements, and s

Tarboro, NC 27886 • (10.1 miles) • Full Time • $13.50 / hr • 10/24/2026

Job Title:FulfillmentAssociate I Schedule: Monday–Friday, 8:00 AM – 5:00 PM Employment Type: Full-Time Work Location: On-Site Job Summary We are seekinga dependable anddetail-oriented FulfillmentAssociate to joinour warehouseteam. This position isresponsible for accuratelypulling, packing, scanning, and shipping Carpecustomer orders, aswell as processingB2B orders. Theideal candidate hasstrong math, reading, and directional skills, works efficiently ina fast-pacedenvironment, and iscommitted to accuracyand quality. Key Responsibilities Accurately pull productsbased on customerand B2B orderrequirements. Scan products andverify order accuracyusing warehouse systemsand handheld scanners. Pack orders securelyto ensure productsarrive safely andmeet company standards. Process and prepareB2B orde

Wilson, NC 27893 • (16.4 miles) • Full Time • $25.00 to $30.00 / hr • 10/23/2026

Equipment Operator ESSENTIAL DUTIES AND RESPONSIBILITIES: Read and interpret grade stakes, utility locates, and basic plan drawings. · Safely operate various types of heavy equipment including boom truck/pressure digger, crane, backhoe, skid steer, and trencher. · Maintain work area, job site and equipment in a neat, clean and organized manner. · Perform labor work when necessary. · Inspect machines daily prior to operation for safety issues, fluid levels and wear and record results on daily inspection forms. · Perform general maintenance of machinery and equipment including the cleaning of cab, windows, tracks and mirrors. Drives construction equipment to and from job sites, loads and unloads equipment from trucks and/or trailers. Makes operating adjustments and minor repairs to equipment

Nashville, NC 27856 • (24.5 miles) • Full Time • 10/23/2026

Position Summary The Shipping and Receiving Clerk will work with Transportation & Warehouse Manager to coordinate all incoming & outgoing shipments for CEC (Carolina Egg Company). Be aware of warehouse health/safety, food safety requirements. Work to maintain strategic relationships with existing customers as well as new customers and our transportation warehouse departments JOB DUTIES Prepares shipments and correspondence; fulfilling customer needs to exceed customer satisfaction. Follows vendor agreements and supports new customer protocols. Resolves product or service problems by clarifying the customer's complaint. Will need to discern what items they can handle and what items to take to their leadership Helps to manage customer correspondence (calls & emails) regarding orders and deli

Wendell, NC 27591 • (42 miles) • Full Time • 10/23/2026

Receiving Associate Department: 171032 – NC Warehouse Operations Reports to: Warehouse Manager Location: Wendell, NC Position Status: Contract- to Hire Status: Hourly, Non-Exempt Management Level: Non-Management JOB SUMMARY KIOTI Tractor is looking for Heavy Duty Forklift Operators who will be responsible for shipping and receiving heavy equipment such as Tractors, ZTRs, and UTVs, and Implements. KIOTI equipment can weight up 7,000 pounds and requires extreme care while moving to prevent unnecessary damages. Navigating throughout the Warehouse with Heavy Equipment is an integral part of this role requiring precise movements and high level of care. Equipment will be unloaded from Ocean Containers for Receiving and loaded onto Vans and Flatbeds for Shipping by our Forklift Operators. KEY RES

Smithfield, NC 27577 • (44.8 miles) • Full Time • 10/22/2026

U.S. LUMBER, an SBP company is currently looking for a Night Shift - Material Handler (Forklift Operator) to join our VALUES based organization who is responsible, at various points, for loading, unloading, sorting, staging, transporting, and otherwise handling products that come into and move out our Smithfield, NC warehouse. Individuals in this position must work cooperatively with other Associates and productively with little supervision. Individuals must always follow U.S. Lumber safety policies and procedures. Shift days/hours: Sunday - Thursday Nights, 11pm -8am EST. Hourly Pay Rate: $20/hour + Benefits Essential Functions: Safely operate forklift and other machinery Band, wrap, tape product Maintain work area and be organized Identify and read tickets, SKUs, UPC labels and reports G

Wilson, NC • (16.8 miles) • Full Time • 10/18/2026

Material Handler Location: Wilson, NC Pay: $14.00/hour Employment Type: Full-Time Shifts: 1st, 2nd, and 3rd Shift Job Summary We are seeking dependable Material Handlers to support daily manufacturing and warehouse operations. This position is responsible for moving materials, supplying production areas, organizing inventory, and helping ensure materials are available when needed. The ideal candidate is reliable, safety-conscious, physically capable, and comfortable working in a fast-paced manufacturing environment. Key Responsibilities Move raw materials, components, finished products, and other materials throughout the facility. Supply production areas with required materials and supplies. Load, unload, stage, and organize materials as directed. Verify materials and quantities against wo

Goldsboro, NC 27533 • (35.9 miles) • Full Time • $13.00 / hr • 10/17/2026

Looking for your next opportunity? Let's get to work! Mega Force is hiring reliable, hardworking Warehouse Associates in Goldsboro! We're looking for people who take pride in doing a good job, pay attention to detail, and want to be part of a team that keeps warehouse operations moving. Whether your strengths are organizing merchandise, preparing orders, or moving inventory, we want to hear from you. Warehouse experience is a plus, but we're open to candidates who are ready to learn! What You'll Do: Tag, sort, and organize merchandise in the warehouse Build and prepare pallets for storage or shipment Pick, pull, and process customer orders accurately Receive deliveries, stock inventory, and move products to the correct locations Assist with loading and unloading trucks Check orders and mer

Tarboro, NC 27886 • (10.1 miles) • Full Time • $15.00 to $16.00 / hr • 10/16/2026

We are seeking a Stand Up Forklift Driver to safely and efficiently handle palletized goods, finished products, and mixed warehouse inventory. This role supports shipping and loading, receiving and putaway, and accurate warehouse operations through dependable equipment operation and material handling. Responsibilities Operate stand-up forklifts to move palletized goods, finished products, and mixed warehouse inventory. Handle pallets and stage orders for shipping and loading. Support receiving and putaway activities. Load and unload materials safely and efficiently. Inspect forklift equipment before operation and report issues. Organize warehouse materials and verify stock accurately. Follow workplace safety requirements and secure loads appropriately. Preferred Qualifications Entry-level

Wilson, NC 27893 • (16.4 miles) • Full Time • $40,000 / yr • 10/15/2026

Benefits: Employee discounts Health insurance Paid time off Profit sharing ***Thank you for considering joining our team! Please read this entire Job description before applying. This is a critical leadership position within our leadership team. We do not take this hiring decision lightly. There will be application questions that require a multiple sentence response. Please provide detailed and thoughtful answers to all of these questions. Our Values Team First, Mission First Relentless Initiative Continuous Improvement Embrace Accountability If you share these core values and you can consistently exhibit them, then this is the team for you. If you do not share these values, there is a place out there where you will fit the culture just fine. We encourage you to go find that place. The Com

Wilson, NC • (16.8 miles) • Full Time • $100,000 to $150,000 / yr • 10/15/2026

We are seeking a Validation Engineer to join our team working in the pharmaceutical packaging industry and play a key role in ensuring that manufacturing processes, equipment, systems, and packaging operations consistently meet applicable quality, safety, and regulatory requirements for our clients. The ideal candidate is a highly detail-oriented professional who understands the importance of Good Manufacturing Practices (GMP) and Good Documentation Practices (GDP) and takes pride in maintaining the highest standards of quality and data integrity. This role is well suited for someone who thrives in a high-integrity, highly collaborative team environment and is committed to doing the right thing when it comes to product quality, patient safety, regulatory compliance, and operational excelle

Spring Hope, NC 27882 • (28.9 miles) • Full Time • 10/15/2026

Interested in a career in agricultureExplore hands-on opportunities with L&M through a Summer 2027 Internship . TITLE: Inventory & Packaging Clerk – Summer Intern (Spring Acres) DEPARTMENT: L&M Warehouse of Spring Acres REPORTS TO: Warehouse Manager LOCATION: Spring Hope, NC (Onsite) SUMMARY: This full-time summer internship is a great opportunity with the potential to transition into a full-time role. Bring your customer service, communication, and organizational skills and learn how L&M operates across North Carolina, Florida, and Georgia. As an Inventory and Packaging Clerk Intern, you will support quality and production teams' goals by assisting with planning, data entry, Inventory control, and executing production activities to ensure strong performance throughout the season. RESPONSI

Kinston, NC 28501 • (38.7 miles) • Full Time • 10/15/2026

Job Summary TRI Solutions is seeking a dependable and motivated Warehouse Attendant to support our commercial flooring operations. This position plays a vital role in ensuring our installation crews have the materials, tools, and equipment they need to complete projects safely and efficiently. The ideal candidate is organized, safety-conscious, and enjoys working in a fast-paced warehouse environment. Responsibilities Receive, inspect, organize, and maintain inventory. Prepare and stage materials, tools, and equipment for upcoming projects. Load and unload company vehicles with materials and equipment. Maintain a clean, organized, and safe warehouse. Clean, inspect, and properly store tools and equipment. Assist with inventory counts and report shortages. Deliver materials and equipment to

Greenville, NC 27834 • (17.2 miles) • Full Time • 10/14/2026

Tomorrow RDS, LLC is a well-established company whose core business is recycling, processing, and marketing of materials. RDS operates four different facilities across three different states, servicing the recycling needs of thousands of companies and households. RDS is committed to recovering as much material as possible from the waste stream for both the short- and long-term health of our environment. RDS has an excellent opportunity for an entry level warehouse position with opportunities for advancement. Initial tasks include the sorting and separation of recyclable products to ensure quality. Learning how to take care of the process machinery and understanding our products line will come naturally to the right individual. As you progress there will be a chance to learn to operate vari

Tarboro, NC 27886-4822 • (9.1 miles) • Full Time • 10/13/2026

Description: Mission : Reduce the opportunity for Red Pick Parts by maintaining order of warehouse and inventory accuracy through assurance that all process are being followed by all warehouse associates. Qualifications : Min. 2 years of experience in warehousing; inventory management Excellent communication skills Computer skills Primary responsibilities and duties : Print RED PICKS list daily and familiarize with RED PICKS due each day Audit RED PICKS at end of day to assure they were checked done if received Print the next day’s engines for hanging daily Print the next day’s kit sheets for picking daily Verify completion from production floor, investigate issues and variances, route to Inventory Control or Shipping and receiving for processing for Blue Sheets daily Audit Blue sheet proc

Kinston, NC • (35.8 miles) • Full Time • 10/13/2026

Warehouse Associate Department: Medical & Surgical Division Reports To: Warehouse Manager Pay Rate: $12–$15 per hour Schedule: Monday–Friday, 8:00 AM–5:00 PM Job Overview We are seeking a dependable Warehouse Associate to join our Medical & Surgical Division team. This position is responsible for receiving, organizing, picking, packing, and shipping medical equipment and supplies while maintaining accuracy and efficiency in the warehouse. The ideal candidate is detail-oriented, reliable, and comfortable working in a fast-paced warehouse environment. Key Responsibilities Receive, inspect, and verify incoming shipments against packing lists Pick, pack, and prepare customer orders for shipment Organize and store products in designated warehouse locations Load and unload trucks and delivery ve

Rocky Mount, NC 27802 • (12.4 miles) • Full Time • $15.00 to $17.00 / hr • 10/12/2026

JOB TITLE : Certified Material Handler DEPARTMENT : Valued Added Business Services FLSA : Full-Time; Hourly/Non-Exempt DURATION : Open Until Filled POSITION PURPOSE As the Certified Material Handler, you will be responsible for daily work production such as sorting and rearranging freight for pickup, loading and unloading trucks, inspecting containers to ensure quality for reuse, as well as banding, packing, and processing products. ESSENTIAL DUTIES AND RESPONSIBILITIES : · Handle a variety of equipment, including operating a forklift. · Sand inside and edges of trays to ensure all burrs are removed. · Lifts trays by hand and clean work area daily. · Wash trays using high-pressure equipment. · Complete various maintenance tasks EDUCATION AND QUALIFICATIONS : Prefer High School Diploma or e

Wilson, NC 27893 • (16.4 miles) • Full Time • $12.00 / hr • 10/11/2026

Description: Company Overview: FilterEasy, LLC is a leading manufacturer and direct-to-consumer distributor of air and water filter products. The subscription-based service eliminates the stress of remembering when to change filters in the home to maintain healthy air and drinking water. With just a few clicks via its modern e-commerce design, customers are set up to receive their filters on-time, when it’s time to change them - never having to think about it again. FilterEasy is private-equity backed by Great Hill Partners. Job Summary: The Picker/Order Selector I, will be responsible for filling customer orders and preparing orders for shipment according to company standards including but not limited to; RF scanners, warehouse management systems, printers, conveyors, and label applicator

Goldsboro, NC 27530 • (38.2 miles) • Full Time • 10/10/2026

This full-time position is responsible for operating several types of construction equipment such as excavators and bulldozers, loaders, rollers to excavate, move, grade, and load material. Skills/Qualifications: 2+ years of experience in construction, Job Knowledge, Ability to attain certifications as required, Fit for Duty Essential Duties and Responsibilities: Proficient in safe operation of CAT bulldozers (CAT D5-D8) and CAT excavators (CAT 320-349) Experience with Construction GPS systems such as Trimble and TopCon is a plus Operate excavators to safely and efficiently load on-road and off-road trucks Operate bulldozer controls to regulate height and angle of the blade and lower ripper to loosen packed soil to permit grading Feel levers and listen to equipment sounds to determine dept

Greenville, NC • (19.9 miles) • Full Time • 10/9/2026

Warehouse Manage r ( permanent position) – Greenville , NC Our clientis seekinga Warehouse Manager who isorganized, safety-minded, andexperiencedin overseeingdaily operations. In this role, you will manage the end-to-end flow of inventoryfrom receiving large bulk shipments of commercial carpet rolls, tile pallets, and sundries to organizing, staging, and loadingmaterials for specialized installation crews. The ideal candidate has strong leadership skills, hands-on experience handling heavy or awkward flooring goods, and a proven track record of maintaining a lean, organized, OSHA-compliant warehouse. This is a permanent position on-site in Greenville , NC , working a 40 – 45 hour work week reportingtothe Operations Manager.The opportunityoffersa competitivehourly rateandgreat benefits. Nov

Wilson, NC 27896 • (18.8 miles) • Full Time • 10/8/2026

JOB LOCATION: Wilson/Princeton, NC areas AVAILABLE POSITIONS: 3 PRIMARY FUNCTION: Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on roadbeds, parking lots, airport runways and taxiways. Will perform minor repairs and maintain equipment in addition to other duties. ESSENTIAL DUTIES: Commercial Heavy Grade 1.) Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment. 2.) Start machine, engage clutch, and push and move levers, switches, and

Chocowinity, NC 27817 • (39.1 miles) • Full Time • 10/8/2026

Description: Boater’s World Manufacturing Group is seeking an experienced and dependable Stockroom & Receiving Lead to support our growing boat manufacturing operation in Chocowinity, North Carolina. The Stockroom & Receiving Lead is responsible for helping coordinate the daily activities of the receiving and stockroom operation while remaining actively involved in the work. This position will help ensure incoming materials are received accurately, inventory is properly stored and maintained, and production teams have the parts and materials they need to keep manufacturing moving. This is a hands-on lead position. The successful candidate will work alongside the team while helping establish daily priorities, coordinate receiving and material requests, maintain inventory accuracy, and ensur

Greenville, NC • (19.9 miles) • Full Time • 9/29/2026

We are seeking experienced Heavy Equipment Operators to join our team in Greenville, NC. The ideal candidate will be skilled in operating a Trackhoe to safely and efficiently support construction activities, while maintaining a strong focus on detail, safety, and teamwork to meet project goals. This opportunity supports three active projects on a college campus, with additional work expectedproviding steady work and strong continuity. (Per diem is available at $100/day for qualified candidates who meet all requirements) Job Description The Heavy Equipment Operator is responsible for operating various equipment such as Backhoe, Trackhoe, Skid Steer, Excavator, Dozer, and other miscellaneous equipment. Must have thorough knowledge of the operation, safety, and maintenance of the equipment be

Greenville, NC • (19.9 miles) • Full Time • $36,000 / yr • 10/24/2026

The Warehouse Associate ensures accurate, timely, and compliant handling of incoming and outgoing inventory while adhering strictly to company quality management systems and standard operating procedures. KEY RESPONSIBILITIES: Inbound and Receiving: · Monitor incoming shipment schedules and match expected deliveries against active open purchase orders. · Offload shipments, inspect freight for exterior damage and verify piece counts against the carrier bill of lading and commercial invoice. · Inspect delivery for item accuracy, physical condition, and completeness. · Process and post goods receipts directly into the ERP system (Business Central) to update on-hand inventory balances accurately and close or update matching PO lines. Outbound and Shipping · Stage, pack, and label outgoing cust

Weldon, NC • (43.5 miles) • Full Time • 10/23/2026

Job Title: Packer Job Description This role focuses on inspecting, packing, and preparing finished products in a fast-moving, team-oriented manufacturing environment. You ensure product quality, follow detailed work orders, record production data, and support shipping operations while maintaining a clean and safe workspace. Responsibilities Conduct thorough visual inspections of finished products to verify quality and compliance with established standards. Load parts onto production conveyors and remove completed items from the line for packaging. Sort and arrange parts into trays, secure lids, and ensure all packaged products are accurately labeled. Review and follow work orders and production documentation to maintain accuracy throughout the process. Record production data and updates in

Rocky Mount, NC • (15.4 miles) • Part Time • $18.00 / hr • 10/19/2026

Warehouse Forklift Operator This position is based at our Rocky Mount NC facility. Essential Duties and Responsibilities · Be able to obtain a company forklift operator’s license. · Maintain safe operating conditions. Able to load and receive trucks correctly and safely. · Perform pre-operational checklist items. · Follow the Employee Health and personal Hygiene Requirements. · Pickorders according to the Pick Sheet, records and compares sku numbers and quantities, pack and wrap pallets. Able to scan productusingRF gun from inventory accurately. · Verify customer orders to ensure quantity, quality, proper labeling, and safe packaging. · Fulfill customer orders as processed. \nCompany Description 3PL Warehouse - Shipping, Receiving, and Storage Company Description 3PL Warehouse - Shipping,

La Grange, NC 28551 • (33.4 miles) • Full Time • $18.00 / hr • 10/17/2026

Join our team and help power the future! We’re looking for a skilled and safety-focused Fuel Handler to keep our power plant running smoothly and efficiently. In this role, you’ll operate and maintain boilers, turbines, dryers, fans, pumps, motors, chemical systems, and other essential plant equipment. You’ll be part of a close-knit team that values safety, reliability, and technical excellence. WhatYou’llDo Conduct daily equipment checks and cleaning. Maintain consistent fuel supply on the walking floor to ensure uninterrupted fuel delivery to the boilers Report any abnormalities to the CRO and record issues on the “Fuel Handler Check Sheet and Heavy Equipment Inspection sheet”. Assists the CRO through onsite inspection and operation of plant systems and gains the knowledge and skills nec

Wilson, NC 27893 • (16.4 miles) • Full Time • $55,800 to $59,400 / yr • 10/23/2026

Location: Wilson, North Carolina Employment Type: Full-Time Department: Warehouse Operations Starting Compensation 1st Shift: $55,800.00 2nd Shift: $57,600.00 3rd Shift: $59,400.00 Higher starting rates may be considered for exceptionally qualified candidates. Schedules This is a 24/7 operation, so weekend hours are required. This schedule allows for weekend rotation and long stretches off. Shift times are somewhat flexible because there is generous overlap between shifts to allow for handoffs, and Wednesdays are reserved for administration/planning time. 4 days;10 hour shifts 1st shift: 6am-4pm 2nd Shift: 2pm-12am 3rd Shift: 10pm-8am Schedule A Week 1 Sun, Mon, Tues, Wed Week 2 Mon, Tues, Wed, Sat Week 3 Sun, Mon, Tues, Wed Schedule B Week1 Wed, Thurs, Fri, Sat Week 2 Sun, Wed, Thurs, Fri

Wendell, NC 27591 • (42 miles) • Full Time • 10/23/2026

Wholegoods Shipping Supervisor Department: Warehouse/NC Operations Reports to: Sr. Warehouse Process Manager Location: Wendell, NC Position Status: Full-time Status: Salary, Exempt Management Level: Non-Management JOB SUMMARY The Wholegoods Shipping Supervisor oversees daily wholegoods warehouse outbound operations, ensuring accurate, safe, and timely processing of dealer orders. KEY RESPONSIBILITIES OF JOB Lead and train shipping employees in accordance with current policy and procedures. Ensure that all order items are processed efficiently, accurately, and without damage. Oversee picking, packing, and loading of shipments to ensure dealer requirements are met. Ensure that all documentation including bill of ladings, shipping labels, etc. are prepared per order. Communicate with all team

Smithfield, NC 27577 • (44.8 miles) • Full Time • 10/22/2026

U.S. LUMBER, an SBP company is currently looking for a Warehouse Associate to assist with grounds to join our VALUES based organization who is responsible, at various points, for cleaning the warehouse, riding a sweeper, and general cleaning. In addition to loading, unloading, sorting, staging, transporting, and otherwise handling products that come into and move out our Smithfield, NC warehouse. Individuals in this position must work cooperatively with other Associates and productively with little supervision. Individuals must always follow U.S. Lumber safety policies and procedures. Shift Times: 9am - Close, Mon - Friday. Hourly pay rate: $18/hour + benefits. Essential Functions: General Labor Riding the sweeper to sweep warehouse floors. General cleaning/housekeeping duties Off-loading

Wilson, NC • (16.8 miles) • Full Time • $115,000 to $150,000 / yr • 10/15/2026

Job Type: Full-Time Industry: Pharmaceutical Packaging Department: Engineering / Quality Position Summary We are seeking a Packaging Project Manager to join our team working in the pharmaceutical packaging industry. In this role, you will provide hands-on project management, coordinate technical and validation resources, and help ensure projects are executed successfully, on schedule, and within established scope and deliverables. Working as part of the Leadership Team, you will play an important role in project planning, resource coordination, risk identification, and issue resolution. This is an opportunity for a proactive project manager who enjoys working with cross-functional teams, solving problems, and making meaningful contributions to project success. Key Responsibilities Project

Rocky Mount, NC 27802 • (12.4 miles) • Full Time • $15.00 to $17.00 / hr • 10/12/2026

JOB TITLE : Certified Material Handler DEPARTMENT : Valued Added Business Services FLSA : Full-Time; Hourly/Non-Exempt DURATION : Open Until Filled POSITION PURPOSE We are seeking a Certified Material Handler to work at our off-site location (Cummins Engine Plant). As the Certified Material Handler, you will be responsible for daily work production such as sorting and rearranging freight for pickup, loading and unloading trucks, inspecting containers to ensure quality for reuse, as well as banding, packing, and processing products. ESSENTIAL DUTIES AND RESPONSIBILITIES : · Handle a variety of equipment, including operating a forklift. · Sand inside and edges of trays to ensure all burrs are removed. · Lifts trays by hand and clean work area daily. · Wash trays using high-pressure equipment

Greenville, NC 27834 • (17.2 miles) • Full Time • $14.00 to $15.00 / hr • 10/12/2026

Tomorrow RDS, LLC is a well-established company whose core business is recycling, processing, and marketing of materials. RDS operates four different facilities across three different states, servicing the recycling needs of thousands of companies and households. RDS is committed to recovering as much material as possible from the waste stream for both the short- and long-term health of our environment. Overview The Equipment & Bailer Operator is responsible for the safe, efficient, and effective operation of equipment at a recycling facility for the purpose of transferring, spreading, covering, baling, loading, unloading, and/or compacting waste or recyclable material. Duties and Responsibilities: LOTO for the machinery being worked on - use this every time you work on or in or around tha

Chocowinity, NC 27817 • (39.1 miles) • Full Time • 10/6/2026

Description: Boater’s World Manufacturing Group is seeking a dependable and organized Stockroom & Receiving Associate to support our boat manufacturing operation in Chocowinity, North Carolina. The Stockroom & Receiving Associate is responsible for receiving incoming parts and materials, verifying shipments, putting inventory away in the correct stockroom locations, and helping maintain an accurate and organized parts inventory. This position also supports the manufacturing floor by picking, staging, and distributing parts and materials to production departments as needed. This is a hands-on position that requires regular use of material-handling equipment. Previous forklift experience and the ability to obtain or maintain company-required forklift certification are required. What You’ll D

Wilson, NC • (16.8 miles) • Full Time • 10/3/2026

Picker/Packer Pay Rate: $12.00/hour Schedule: 4 days per week, 10 hours per day Shifts : 1st Shift | 3rd Shift Position Summary We are seeking dependable and detail-oriented Picker/Packers to join our warehouse team. The Picker/Packer will be responsible for accurately picking products, preparing customer orders, and packing items for shipment while maintaining productivity, accuracy, and safety standards. The ideal candidate is reliable, hardworking, and comfortable performing repetitive tasks in a fast-paced warehouse environment. Available Shifts 1st Shift: 7:30 AM – 4:00 PM 3rd Shift: 5:00 PM – 3:30 AM Work Schedule: 4 days per week, 10 hours per day Pay Rate: $12.00/hour Available Positions: 10 openings on 1st Shift and 10 openings on 3rd Shift Key Responsibilities Accurately pick pro