Mooresville, NC 28117 • (33.7 miles) • Full Time • 9/21/2026

Do your Best Work in MooresvilleThis position is based at our headquarters in Mooresville, North Carolina. Our corporate office is a space where you can collaborate and do your best work. Take a walk, grab a bite (or a cup of coffee), work out or get a check-up – we invest in you so you can find your inspiration.Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at any time. What You Will DoThe Principal Industrial Engineer is responsible for identifying, analyzing, securing resources and support, and developing solutions that will facilitate continuous productivity, capacity, safety, and quality improvement within Lowe's Supply Chain and Distribution teams. Within distribution, the Principal Industrial

Charlotte, NC 28201 • (8.2 miles) • Full Time • 9/26/2026

Transmission Line Engineer IIIThis position falls within the Transmission Line Engineering Department of our organization. The successful engineer will complete projects that support our large utility customer, with minimal direction. The engineer will work with in-house and client engineers, and graphics technicians. The Lead Engineer will oversee a small department of Transmission Line Engineers and will also coordinate and conduct training to lower-level engineers.Primary Duties and ResponsibilitiesResponsible for the engineering and design activities related to Transmission Line Engineering such as engineering analysis and design, route selection, material acquisition, structural and foundation design, and project and construction managementPrepare project construction documents such a

Charlotte, NC • (9.1 miles) • Full Time • 9/26/2026

LaBella is currently hiring for a Senior Structural Engineer in our Charlotte, NC office.DutiesSenior Structural Engineer who can work independently or lead a team of structural engineers, designers and/or a draftsperson in production of structural construction documents including drawings and specifications for a wide variety of projects from small renovations to large and complex new construction.Provide construction phase services such as reviewing shop drawing and submittals, responding to RFI’s and conducting site visits to observe completed work for general conformance with project requirements.Provide assessments and forensic or feasibility studies for existing structures to be improved, purchased or that have been damaged.Work closely with clients to develop cost effective structur

Charlotte, NC • (9.1 miles) • Full Time • 9/26/2026

Building EngineerJob DescriptionThe Operating Engineer 3 (Building Engineer) plays a key role in the safe, efficient, and reliable operation of facility systems. This role focuses on operating, maintaining, troubleshooting, and repairing mechanical, electrical, plumbing, HVAC, and life safety systems to ensure the building consistently meets applicable standards. The engineer demonstrates technical expertise in at least one core craft areasuch as Electrical, HVAC, Piping/Plumbing, or Central Utility Plant Operationswhile being multi-skilled across other disciplines to complete daily and weekly work assignments.ResponsibilitiesOperate, maintain, troubleshoot, and repair facility equipment and building systems, including mechanical, plumbing, structural, furniture, fire, life safety, and con

Charlotte, NC • (9.1 miles) • Full Time • 9/26/2026

What You will Do:Support the supervisor in managing a team of hourly employees on work assignments.Support coaching and mentoring team members to grow with assigned work experience.Execute jobs priorities with the planning and technical support team.Identify issues with product flow and resolve with the assistance of the technical support team.Support supervisor to manage Productivity of the hourly team to ensure product movement and schedule requirements.Ensure manufacturing processes are clearly defined and communicated from manufacturing engineering to the shop floor via technical instructions, project briefings, etc.Provide technical guidance and training to operators, technicians, and manufacturing engineers on the use of fixtures, tooling, and equipment.Support OIL documentationWhat

Charlotte, NC • (9.1 miles) • Full Time • 9/26/2026

Senior Windows Infrastructure Migration Engineer 6+ Month Contract (with potential extension) Work Hours: Monday–Friday, 8:00 AM – 5:00 PM Work Arrangement: Hybrid – minimum 2–3 days per week onsite Benefits: Medical, dental, and vision benefits included Please Note: Not open to Third-Party Firms and candidate must reside in the Charlotte, NC area. We are seeking a seniorlevel Windows Infrastructure Migration Engineer to support enterprise modernization efforts focused on upgrading legacy Windows Server environments. This role is handson and executiondriven, centered on migrating businesscritical applications and services from Windows Server 2008 to newer supported versions (2019 / 2022) within an IaaS environment. This is not a software development role. The focus is on operating system u

Charlotte, NC 28204 • (9.6 miles) • Full Time • 9/26/2026

Senior Software Engineer – Corporate Finance TechnologyPosition Summary We are seeking a Senior Software Engineer to design and build integration solutions connecting vendor financial platforms with enterprise systems. This role sits within our Corporate Finance Technology organization, supporting integrations across capital markets, treasury, and financial reporting functions with a focus on cloud-based integration architecture, workflow automation, and reporting capabilities.The ideal candidate brings strong Python development skills, hands-on experience integrating financial data feeds (e.g., Bloomberg, Acadia, FIS), and comfort operating in audit-aware, controls-driven environments.Key Responsibilities Design, develop, and maintain integrations between vendor financial platforms and en

Rock Hill, SC 29730 • (15.6 miles) • Full Time • 9/26/2026

Position Open: AutoCAD Electrical DesignerLocation: Rock Hill, SCReports To: Electrical Engineering ManagerCompany Overview:Cryogenic Technology Resources (CTR) is a leading provider of industrial gas products and services, helping customers enhance productivity and profitability by reducing labor costs, minimizing space requirements, and improving the operational efficiency of their industrial gas infrastructure. CTR is a part of the TransTech Group Portfolio of companies.TransTech Group is a premier provider of innovative engineered products and services, catering to the industrial process and energy sectors. TransTech Group operates through 7 portfolio companies with 13 locations across the United States, supported by a combined workforce of nearly 700 employees. TransTech Group deliver

Gastonia, NC • (20.1 miles) • Full Time • 9/26/2026

Company Description About SikaWith more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries.Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and trans

Concord, NC • (25.6 miles) • Full Time • 9/26/2026

Company Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries.Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programs as we turn challenge into opportunity and complexity into success.Our capabilities include program, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions.We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interes

Lancaster, SC • (25.8 miles) • Full Time • 9/26/2026

LASER OPERATOR LANCASTER, SC Pay: $17–$21/hour, based on experienceSchedule: Monday–Friday | 7:00 AM–3:30 PM1+ YEAR OF LASER OPERATOR EXPERIENCE REQUIREDWe are looking for an experienced Laser Operator to operate laser cutting equipment and support daily manufacturing operations. Candidates should have hands-on experience with laser machinery, strong attention to detail, and the ability to read blueprints and work with different materials.JOB DUTIES Operate and monitor laser cutting equipmentSet up machines and adjust settings as neededLoad and unload materials safelyRead and interpret blueprints and work instructionsVerify material type, thickness, dimensions, and cut qualityPerform quality checks on finished partsTroubleshoot basic machine issues and make adjustmentsFollow all safety and

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

G&W Equipment, Inc. is a family-owned dealership for CAT® Lift Trucks, Mitsubishi Forklifts, and Jungheinrich Forklifts. We provide sales, service, and support for material handling and aerial equipment across North Carolina, South Carolina, and Georgia.Description A Field Service Technician for our Charlotte, NC branch provides service and repair for forklifts and material handling equipment at customer facilities. This role requires strong diagnostic and troubleshooting skills, the ability to work independently in the field, and a commitment to delivering safe, reliable repairs that keep customer operations running smoothly.Key ResponsibilitiesDiagnose and repair forklifts and material handling equipment (electric, LPG, diesel, and gas)Perform planned maintenance, safety inspections, and

Charlotte, NC 28202 • (10.1 miles) • Full Time • 9/25/2026

Kleinschmidt has a full-time opening for a Senior Engineer-Hydropower Lead in either our Lexington, South Carolina or Charlotte, North Carolina offices to develop hydropower engineering work in the region and support projects across Kleinschmidt. We welcome candidates based in the Southeast region. Our flexibility and core value of relationships allow us to offer employees the opportunity to work in a hybrid environment.Salary: $120,000 - $185,000/year (based on experience)Who You AreKnowledgeable: A licensed Professional Engineer with a BS in Civil, Mechanical, or Electrical Engineering, and a minimum of 15 years' experience in hydropower engineering, business development, client management, and project management. Knowledge of standards and codes applicable to the candidate's engineering

Pineville, NC 28134 • (0.2 miles) • Full Time • 9/25/2026

Company Description Our drive and control technologies ensure efficient, powerful and safe movement in machines and systems of any size. We inspire our customers with intelligent components, tailored system solutions, and services – from fully connected applications to the factory of the future. Bosch Rexroth is dedicated to making the world a better place through innovation and technology. We are looking for associates who will take on our customers’ challenges with passion and persistence until the right solution is found and who will thrive in a face-paced, collaborative and exciting environment.Why work with Bosch Rexroth?Challenging Projects: We are driven by innovation and being at the cutting edge of everything that we do. At Bosch Rexroth every day is different, and your time will

Charlotte, NC 28273 • (4.1 miles) • Full Time • 9/25/2026

As a result of our phenomenal growth, MSS Solutions, LLC has an opening for a Low Voltage Control Engineer in our Charlotte, NC or Raleigh, NC office. If you are an experienced professional who is looking to grow your career and contribute fresh and innovative ideas to serve our customers, this is an opportunity you should explore!A career at MSS is not just a job -- it's collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives.The success of MSS is a direct reflection of our team's dedication, passion, and hard work. Since 1996, MSS has taken pride in retaining some of the best talents in the industry by promoting a culture of respect, collaboration, and empowerment.Role and ResponsibilitiesCreate plans, sche

Charlotte, NC 28217 • (5.9 miles) • Full Time • 9/25/2026

Description: Sun Service Specialists is a rapidly growing solar service company based in Charlotte, NC. We specialize in servicing and supporting existing residential and light commercial solar, battery storage, and EV charging systems.We’re looking for an experienced Solar Service Technician who enjoys troubleshooting, working with their hands, and solving problems in the field. If you have hands-on solar experience and want to grow your skills in the service side of the industry, we want to hear from you!What You'll Do•Troubleshoot, diagnose, repair, and maintain residential and light commercial solar PV systems.•Service inverters, optimizers, monitoring equipment, and other solar components.•Assist with battery storage and EV charging systems.•Complete service calls and projects safely,

Charlotte, NC 28201 • (8.2 miles) • Full Time • 9/25/2026

Manager Applications Engineering Data Center Cooling - Charlotte, NC / Hybrid Remote Our client is a niche provider / OEM / Manufacturer of Industrial Air Cooled / Liquid Cooled equipment used in critical facilities industries.They provide design, commissioning oversight and consulting expertise as it pertains to the company's OEM rapidly expanding data center cooling business. This company provides an OEM product offering of Cooling Equipment solutions to many of the world's largest organizations: Enterprise Clients, Colocation Providers, Hyperscale Companies, AI / HPC and Bitcoin Providers. Their product optimizes thermal-management strengths and ecosystem capabilities into standardized, customer-ready and commercially executable Data Center / AI infrastructure solutions.This career-grow

Charlotte, NC 28201 • (8.2 miles) • Full Time • 9/25/2026

OverviewJoin CTG and Elevate Your Career! CTG has partnered with an international, Fortune 500 end-client for over 15 years! Apply with CTG for this exciting opportunity! CTG's premier client has a contract assignment for a Design Engineer.Type: ContractJob Title: Design EngineerLocation: Charlotte, NC (hybrid remote)Candidates must be able to commute and work onsite in Charlotte, NCPay Rate: Based on experienceWork Hours: M-F 8am-5pmEducation: Bachelor’s degree in Industrial Design, Product Design, or a related fieldA successful candidate in this position will possess strong soft skills as well as:Excellent communication and collaboration abilitiesCreative problem-solving mindsetA proactive approach to learning and improvementPosition Overview: We are seeking an experienced and talented D

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

Capgemini is at the forefront of innovation, integrating AI technologies to enhance customer experience and streamline operations.We are seeking an experienced and innovative Verint AI Software Engineer to join our team supporting a premier U.S. Property & Casualty insurance carrier. This role is ideal for a technologist with deep expertise in Verint AI and a strong understanding of enterprise voice ecosystems, including CISCO, Google Cloud, and NICE. You will be instrumental in designing, developing, and optimizing AI-driven solutions that enhance customer experience, operational efficiency, and digital engagement. In this role, you will work closely with cross-functional teams to design, develop, and deploy AI-driven solutions that leverage Verint AI technology to address complex busines

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

About Markup AIMarkup AI is pioneering the AI content governance category with the industry's first Content Guardian AgentsAI-powered agents that automatically scan, score, and rewrite content to ensure it meets brand, compliance, terminology, and quality standards before it goes live. Purpose-built for AI-first marketing and content teams, Markup AI integrates directly into LLMs, CMS platforms, and enterprise workflows through its API- and MCP-first architecture, giving organizations the confidence to scale AI-generated content without sacrificing quality, consistency, or trust. Backed by decades of expertise in enterprise content governance, Markup AI is helping leading global brands publish faster, safer, and with confidence.Eligible candidates must reside in one of the following states

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

Heavy Civil Project Engineer Underground Utilities Location: Roxboro, NC & Nationwide projects | Travel requiredBase salary: $85,000–$100,000 annually, based on experienceWe are recruiting a Project Engineer for a heavy civil contractor specializing in underground utilities, water, and sewer construction. The company works nationwide on projects that typically last one to three years.You’ll work alongside project managers and field leaders to keep projects organized, on schedule, and moving safely. The role includes time at both project sites and the corporate office. Expect to travel approximately three out of four weeks each month, including overnight stays. The company covers business travel, lodging, and per diem.What you’ll do Support underground utility, water, and sewer projects fr

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

Project Development Engineer II | Energy Auditing & ESCO Experience | Remote | $70,000 $120,000 | Full Time$70,000 to $120,000 a yearMedical, dental and vision insurance401(k) savings plan and health savings accountLife and disability insuranceFlexible spending accountsCollege Coach and employee assistance program accessFully remote with travel expenses coveredThe buildings schools, hospitals, federal facilities and correctional institutions use consume enormous amounts of energy every day. An energy conservation company is looking for a Project Development Engineer II who can walk into those facilities, audit every mechanical system from HVAC to water management and engineer solutions that drive down costs and carbon footprint across the built environment.You will lead on-site surveys and

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

Be Part Of A High-Performing Team:Join a global financial technology organization modernizing the data capabilities that support broker-dealer and capital markets operations. This team is developing a strategic, cloud-based data platform designed to improve how securities, pricing, reference, and market data are governed and consumed across the enterprise. The environment brings together experienced engineers and financial technology professionals working across the United States and India, with a strong emphasis on collaboration, scalable architecture, disciplined development standards, and data-driven innovation.What's In Store For You:Engagement: W2 only (no C2C/1099)This is a long-term hybrid consulting opportunity based in Charlotte, North Carolina. The role provides direct involvemen

Charlotte, NC 28208 • (10.1 miles) • Full Time • 9/25/2026

Ardurra is seeking an experienced Senior Water/Wastewater Engineer to join our team in Charlotte, NC. Our innovative water and wastewater engineers collaborate closely with clients to plan, design, permit, and construct systems that address their needs comprehensively. This approach allows our clients to make smarter investments, resulting in lower life cycle costs and additional benefits. As a recognized leader in the mid-Atlantic water industry, our projects encompass treatment and infrastructure initiatives for municipal and institutional clients, ranging from drinking water supply to water reuse and wastewater management. We support projects of all sizes within a flexible and innovative team environment.Primary Function:This position will serve as a subject matter expert on multidiscip

Matthews, NC 28105 • (10.4 miles) • Full Time • 9/25/2026

Join the Team! Our employees are thriving both inside and outside of the office. We are growing faster than ever, and it’s not because of what we do, but how we do it. It’s simple: our employees are our greatest asset. We value them and give them every reason to stay happy and motivated. We perform at high levels, fueled by an eclectic team. We boast a fun, energizing workplace with an emphasis on innovation, teamwork, quality work, and customer satisfaction.COMPENSATION AND BENEFITSSalary Range: Competitive based on Individual ExperienceMedical, Dental & Vision Coverage401 K Program$100K Life InsurancePet InsuranceA competitive and Rewarding EnvironmentYOUR CAREER STARTS HERE!ABOUT US: Tomarco Contractor Specialties, dba ISAT Total Support, designs, manufactures, and distributes non-struc

Gastonia, NC 28056 • (16 miles) • Full Time • 9/25/2026

Manufacturing EngineerLocation: Gastonia, NC (IFAB Corp On-site)Job Type: Full-TimeAbout the RoleAt IFAB Corp, the Manufacturing Engineer is the technical owner of how parts are made. In this role, you will design, document, and continuously improve our fabrication and assembly processesstamping, forming, welding, CNC machining, assembly, and coatingto ensure production runs to standard with predictable cycle times, yield, and costs.If you thrive in a hands-on shop-floor environment where your engineering background directly drives plant productivity, quality, and process capability, this role is for you.Key ResponsibilitiesProcess Engineering & Documentation: Develop and maintain manufacturing routings, operation sequences, standard times, and Bills of Materials (BOMs) within our ERP envi

Murphy, NC 28078 • (22.1 miles) • Full Time • 9/25/2026

Job Title: CNC Programmer – Aerospace Components Location: JGA Space & Defense – Huntersville, NC (On-site position) Reports To: Operations Manager Company Overview JGA Space & Defense is a premier manufacturer of advanced specialty composites and precision machined components for aerospace, space, and defense applications. Formerly Joe Gibbs Manufacturing Solutions (JGMS), JGA has evolved from its roots in high-performance racing to become a trusted partner in delivering mission-critical solutions for the world’s leading innovators in national security and space exploration. With decades of experience engineering, qualifying and manufacturing solid rocket motor (SRM) hardware, including rocket nozzle ablative insulators and assemblies, JGA’s dedicated focus is on advancing the U.S. defens

Mooresville, NC 28117 • (33.7 miles) • Full Time • 9/25/2026

Description: POSITION TITLE: Trumpf Laser & Press Brake Field Service Engineer IIDIVISION: AllREPORTS TO: VP of OperationsDIRECT REPORTS: NoneLOCATION: RemoteJOB SUMMARYThe Trumpf Laser and Press Brake Field Service Engineer II will be responsible for supporting our customers with installation of new and used machinery. This will include press brakes and/or lasers for our Trumpf products. He/she will be responsible for supporting any maintenance and repair after installation as well as support during trade shows as needed to support the development of our customer relationships.PRINCIPAL ACCOUNTABILITIESInstallation of new & used machineryStart-up & commissioning of newly installed machinery.Troubleshoot electrical, hydraulic, pneumatic & mechanical systems, used to control modern machiner

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

Unit8, founded in 2017, is a high-tech, dynamic Swiss leader in AI and data analytics consulting, renowned for solving complex challenges in traditional industries such as automotive, chemical, financial services, manufacturing, and pharma. Our esteemed partnerships with industry giants like Palantir, NVIDIA, and OpenAI underscore our commitment to excellence. With over 200 successful projects and a team of 150+ talented professionals across Switzerland, Poland, and Germany, we are now expanding our footprint to the USA.Unit8 is dedicated to driving AI adoption in non-digital industries, accelerating their digital transformation. We invest in projects that matter, including pro-bono initiatives and "engineering for good" causes.RequirementsAbout You Following our remarkable growth in Switz

Indian Trail, NC 28079 • (16.5 miles) • Full Time • 9/25/2026

Benefits:Bonus based on performanceCompetitive salaryOpportunity for advancementPaid time offTraining & development The AdvantaClean Field Technician provides mold remediation, air duct & dryer vent cleaning, HVAC coil cleaning, emergency water damage recovery, and installation of moisture control solutions in homes and buildings. Field Technicians work directly under the supervision of a Lead Technician, Crew Supervisor, or Project Manager in a team atmosphere. The Supervisor will assign various tasks to the field technician to complete that as part of the project as a whole. Typical Duties Include:Light demolition / removal of finished building materialsProject cleanup, bagging, and removing debris to jobsite collection bin or vehicle for haul offOperating water collection vacuums or pum

Charlotte, NC 28217 • (5.9 miles) • Full Time • 9/25/2026

At Three Notch Group, we are a leading civil engineering firm with over 75 years of experience, dedicated to delivering a wide range of services, including Field and Lab Services, UST, Environmental, Utility, Transportation, Geotechnical & Construction Engineering, and Civil/Site Development. We foster a collaborative environment where driven team members can build lasting friendships, support one another, and guide our clients in shaping their futures. With offices across the Southeast, including seven in Alabama, two in North Carolina, one in Florida, and one in Tennessee, we offer an exceptional opportunity for personal and professional growth. If you’re ready to make a difference and advance your career, join us at Three Notch Group and be part of a team that truly values your contribu

Charlotte, NC 28201 • (8.2 miles) • Full Time • 9/25/2026

**Nationwide Search - Relocation and opportunities to travel available**One of the fastest growing manufacturers of mission critical power equipment is seeking Field Service Techs to oversee the installation and commissioning of their equipment. The right candidate will have a background doing low to mid voltage electrical work and some formal education; trade school, military, or on the job. Though no formal certifications are required. The right candidate will be customer focused, attentive to detail, and a solid communicator both verbal and written. The person will be charged with the start up, commissioning, trouble shooting, and repair of power equipment such as PDUs found in data centers. So experience and aptitude in electrical installations, repairs, and service for sophisticated e

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

Senior Mechanical Engineer, PE - Healthcare Location: Charlotte, NC | Type: Full-Time, Direct Hire | Discipline: Mechanical (MEP)About the Role Healthcare mechanical design is where the stakes are highest - pressure relationships that keep infection out of an OR, air changes that protect immunocompromised patients, redundancy that has to hold when nothing else can fail. We're looking for a licensed Senior Mechanical Engineer to own that work across the Charlotte region and beyond.You'll serve as Mechanical Engineer of Record on hospitals, ambulatory surgery centers, medical office buildings, and outpatient facilities - guiding projects from schematic design through construction administration and putting your stamp on documents that matter. This is an ownership role: you'll lead project t

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

CPI Security is seeking an experienced Genesys Cloud Engineer to serve as the technical owner for our Genesys Cloud CX environment, with a strong focus on outbound dialer strategy, administration, performance and optimization. This role helps strengthen internal platform ownership, improve contact center productivity and support the technology that helps CPI protect what matters most. This full-time role is based in-office, in our headquarters in Charlotte, North Carolina.In this role, you will partner with contact center leadership, Salesforce and business application teams, analytics, IT, carriers and vendors to translate business goals into reliable Genesys Cloud solutions. You will support outbound campaigns, inbound routing, Architect flows, integrations, reporting, workforce engageme

Charlotte, NC • (9.1 miles) • Full Time • 9/25/2026

Role : AWS GenAI Lead EngineerLocation : Malvern, PA/Charlotte, NCDuration : 6+ Months ContractRole ResponsibilitiesWe are seeking a highly skilled AWS GenAI Lead Engineer to analyze business requirements and processes, design intelligent agent workflows, and deliver secure, scalable, enterprise-grade agentic applications. The role combines hands-on engineering with technical leadership across the AWS AI ecosystem.The ideal candidate will have strong experience with AWS Bedrock, Python, FastAPI, Strands Framework, LangChain, and LangGraph, along with expertise in retrieval-augmented generation, tool integration, prompt engineering, observability, testing, and production deployment.Key Roles and Responsibilities Required Experience and Skills• 8+ years of software engineering experience, in

Charlotte, NC 28280 • (10 miles) • Full Time • 9/25/2026

Chief Engineer –NCOur client, a geotechnical ground improvement solutions company, is looking for a Chief Engineer.The Chief Engineer serves as the company’s highest-level and most senior technical advisor and expert,providing expert guidance, proactive mentorship, and strategic insight across all geotechnicalengineering activities. Ideally based out the Greater Charlotte, NC area.Responsibilities:Provide Leadership Team level support and mentorship to engineering and technicalleaders and resources across the organizationCollaborate with engineering teams to establish, oversee and refineengineering strategy, standards, and technical governanceServe as high level technical authority on complex geotechnical designs, methodologies,and construction approachesCollaborate with engineering teams

Charlotte, NC 28206 • (12.4 miles) • Full Time • 9/25/2026

Bolton & Menk has an exciting opportunity for a Project Engineer, PE to join our Land Development team in our Charlotte office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Southeast, Midwest and beyond.We are looking to add a Project Engineer, PE who will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities!What You Will Be Doing:Responsible for the management planning, scheduling and performance of multiple engineering projects and personnel, both design and constructionWork closely with Project Managers in understanding cli

Huntersville, NC • (22.1 miles) • Full Time • 9/25/2026

About Company:About usSince 1919, we at Forbo Movement Systems have been the specialists for high-quality conveyor and processing belts, versatile plastic modular belts, homogeneous conveyor belts, efficient power transmission belts and precise timing and flat belts. Our innovative solutions for production, material flow and logistics contribute significantly to the competitiveness of our customers. In addition to our focus on quality and innovation, we consistently focus on sustainability. Through continuous improvements, we also support the sustainability efforts of our customers.About the Role:Contribute to Product and Process Innovations. Conduct cutting-edge research and development activities to improve existing products and develop new products. Develop and optimize manufacturing pr

Dallas, NC 28034-2013 • (22.9 miles) • Full Time • 9/25/2026

Are you self-motived with a drive to succeed? Do you enjoy people but function well independently? Are you someone who thrives when multi-tasking while pursuing excellence? Do you have a natural sense of urgency but care about the details, and enjoy following established processes and procedures? Do you enjoy working outdoors and don't care to ride a desk for eight hours a day. Are you looking for an exciting opportunity to plant, develop and grow a career with a thriving company, in the construction space?If the answer to any or all of these is yes than you can STOP LOOKING because BECI is the COMPANY YOU'VE BEEN SEARCHING FOR! We are currently seeking a Project Manager or Project Engineer, to join our team in the Charlotte, NC market.This position is considered local however, out of mark

Concord, NC 28027 • (25.4 miles) • Full Time • 9/25/2026

CNC Laser Systems Field EngineerDepartment: Laser ServiceLocation: Charlotte/Concord, NC AreaYour day-to-dayOn Monday morning, you head to a regional customer site as the on-site expert for Mitsubishi laser cutting systems. By mid-morning, you’ve reviewed schematics, traced signals, and isolated a fault. After rebuilding an assembly and dialing in final adjustments, you walk the customer through what happened and how you fixed it. Throughout the week you’ll split time between hands-on mechanical work, electrical diagnostics, and clear communicationso by Friday evening, you’re headed home with satisfied customers and detailed service notes submitted.What you’ll doTravel to customer facilities to diagnose, troubleshoot, and restore Mitsubishi CNC laser machinery to optimal operation.Execute

Charlotte, NC 28210 • (3.6 miles) • Full Time • 9/24/2026

Job Title: Principal Data EngineerJob Description– Principal Data EngineerJob Type: Contract W2Location: Johnston, RI or Charlotte, NC or Boston,MARole Overview:Principal-level Java engineer to design and build enterprise-grade, real-time and batch data processing systems using Java, Spark, Kafka, and Microservices architecture. Strong focus on event-driven pipelines, API development (build + consume), and high-volume streaming platforms.Key Responsibilities:Architect, design, and implement enterprise-grade Java-based data platforms and distributed processing systemsBuild and maintain production-ready Spark applications (Java) for batch and real-time processingDesign and evolve Kafka-based event streaming and ingestion pipelinesDevelop and consume REST APIs within microservices architectur