We are looking for experienced Traffic Control Technicians to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Position Location: Browns Summit, North Carolina - Greensboro Browns Summit PlantJob Summary:The Senior Electrical and & Instrumentation Technician is responsible for enabling production throughput, reducing equipment downtime, troubleshooting issues, eliminating defects, and building technical mastery. They are a subject-matter expert in a specific technology, and they are capable of covering multiple areas during their shift. As the skills increase, they are capable supporting improvements and capital projects with the goal of delivering the best product, at the lowest cost, with the highest quality, and in a safe environment. In general, this role will be focused on electrical technical mastery in order to successfully troubleshoot problems and to proactively improve production systems.As a Senior Electrical and Instrumentation Technician you will be responsible for the following:Maintaining and troubleshooting high-speed packing, making, and facilities power & controls equipment.Collaborate with Operating and Project Teams to eliminate losses and improve electrical systems.Performing preventive maintenance and calibrations on equipmentTroubleshooting, monitoring, & programming PLC, SCADA, and HMI systemsTroubleshooting and monitoring variable frequency drives, servo control systems, roboticsTroubleshooting and repairing machine and process control equipmentAnalyzing trends and technical data to gain insights of the controls and identify issues proactivelyBuilding technical skills in othersApply electrical technical skills to support business.Acquire Low Voltage Qualification (up to 1,000V).Utilize tools to eliminate defects and improve systems (UPS, Y-Y, failure analysis, etc.).Be knowledgeable on the electrical systems on equipment in order to effectively troubleshoot issues and lead improvement projects.Be involved in all planned maintenance downtime events.Capable of advanced programming, set-up and configuration of electrical components (VFD’s, PLC’s, Servos, Flow Meters, Pressure Meters, communications, etc.).Conduct electrical troubleshooting (hardware and software) in support of Operating TeamsProactively monitor and maintain electrical field devices and power systems (execute PM’s, CIL’s, replace in-kind, calibrations, etc.).Execute electrical Maintenance Planning task.Demonstrate computer aptitude- acquire basic programming, set-up, and configuration of electrical components (VFD’s, servos, PLC’s, scales, communications, etc.)Interface with vendors, suppliers, or on-site construction teams.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

The HVAC Technician II performs maintenance, repairs and installation of assigned HVAC and Refrigeration equipment and controls, chilled water systems, boilers, and various other mechanical, electrical and building systems in accordance with client expectations and requests. Basic Qualifications: • Must be 18 years of age or older • Must possess a valid, unexpired driver's license • Must possess HVAC license in the state, county or city jurisdiction in which work will be performed • Must possess EPA Universal certification credentials • Must have refrigeration/HVAC trade or vocational certification • Three (3) years of HVAC experience are required • A minimum of one (1) year of experience as an HVAC Journeyman is required Preferred Qualifications: • Five (5) years of HVAC experience is preferred Responsibilities: • Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems • Use common tools of the HVAC trade in daily work (e.g multimeter, refrigerant gauges, charging charts, hand tools etc.) • Install, maintain, and repair ventilation and air conditioning systems and equipment • Identify maintenance risks on equipment • Diagnose electrical and mechanical faults for HVAC systems • Clean, adjust and repair systems, and performs warranty services • Perform emergency repairs promptly and efficiently • Provide technical direction and on-the-job training • Keep daily logs and records of all maintenance functions • Ensure compliance with appliance standards and with Occupational Health and Safety Act • Comply with service standards, work instructions and customers' requirements • Assist with customer queries inquiries • Complete other duties as assigned Military and veteran friendly employer, veterans and candidates with military experience encouraged to apply #300 About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call . We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

We are seeking a skilled Industrial Maintenance Mechanicwho is team oriented to join our Sanford, NC. This team member will be responsible for maintaining/repairing all company equipment and tooling within the facility. Why work for Clean Harbors Competitive annual salaryOpportunities for growth, development and internal promotionHealth, Dental and Life Insurance401k, tuition reimbursement, and paid time offCompany paid certifications, licenses and trainingPerforms preventative maintenance, conducts inspections, troubleshoots, diagnoses failures & deficiencies & performs necessary corrections.Completes and maintains all service, parts/inventory records in a timely & accurate manner.Completes daily checklist as required for proper operation of maintenance being performed.Assures daily maintenance duties performed and communicates any problems or issues with the Unit it immediately upon discovery.LOTO – Always follow safety protocolReviews all applicable SOPs, and complete all mandatory Company and job specific training.Completes and submits all associated paperwork as required for tracking PM schedules.Conducts Safety Checks & Annual InspectionsFabricating, welding, modifications etc. / pump & piping installsEnsures that work meets all applicable Health andSafety Standard Operating Procedures.Ensures, understands, and has ownership for area specific permit required compliance standards.Responsible for maintaining a clean work environment.Performs other assignments as assigned by management.Keeps within Compliance Standards.Performs maintenance functions, including, but not limited to Electrical, Pneumatic, Hydraulic, and MechanicalMaintains facility equipment through Preventative Maintenance Management systems.Assures proper preventative maintenance of all plant equipment, stationary and mobile.Assembles components and parts, as required by manufacturers.Maintains all plant equipment and systems.Operates a forklift and various heavy equipment, when necessary, to assist in diagnosis.Reviews all applicable standard operating procedures (SOPs) and satisfactorily completes quizzes.Responsible for maintaining a clean work environment. Drives Clean Compliance Standard.Ensures that work meets compliance standards within facility operation. Ensures that work meets all applicable Health and Safety Standard Operating Procedures.What does it take work at Noble, a Clean Harbors Company 3-5 years maintenance experience in an Industrial environment preferredFamiliar with pressure temperature flow and level instrumentation distillation stills, general evaporating equipment, cooling towers, pumps, and boilers a plus!Piping systems and fluid dynamicsAbility to meet physical demands of the position and lift up to 50lbs, including movements such as lifting, bending, reaching, climbing, and the manipulating and handling of objectsClean and valid driver’s licenseConfined spaces and maintain confined space certificationAbility to be fitted for and work wearing full face respiratorClean ShavenAbility to work in extreme weather conditionsAbility to stand for long periods of time Noble Oil Services, Inc., a Clean Harbors company, an environmental services company specializing in the collection and re-refining of used motor oil to generate vacuum gas oil (VGO). Noble Oil is part of the Safety-Kleen Sustainability Solutions business. Every day, we help our customers resolve their waste management needs and reduce their carbon footprint. PROTECTION. CHOICES. PEOPLE. MAKE GREEN WORK Clean Harbors company, is a Military & Veteran friendly company.*SK LI-MM1

Description EGC Construction, a subsidiary of Messer Construction Co., is currently seeking an Electrician to join the team at our project site in Greensboro, NC.EGC employs more than 120 skilled craft workers that focus on safety, quality and customer satisfaction. We offer general, commercial and industrial construction including electrical work, millwrights, pipe fitters and structural steel detailers.Headquartered in Newport, Kentucky and have been servicing local, regional, and international clients since 1978. EGC is committed to safety and the continuous improvement of our safety systems. We have received national safety awards as a result of our performance. EGC proud to be part of the Messer family of companies and we are committed to building what matters most for our customers and transforming the communities in which we live.What You Will Do:Read and interpret single line diagrams, elementary drawings and P&ID’sInstallation of raceways: Cable tray, Wire way and Rigid conduitInstrumentation and Control wiring and/or tubing.C1D1 and intrinsically safe wiring methods.Perform planned maintenance, inspection and installation on process and production equipment.Follow job site safety and regulations and maintain a safe and clean work area. Identify safety hazards and protect self and others.What You Will Bring:High school diploma or equivalent.Candidates must have transportation and good communication skills.OSHA 10 CertifiedBe willing to work within a 50-mile radius. Willingness to travel to other states for work is a plus!Be able to work in a variety of seasonal and weather conditions.Abilities:Possess all auditory, speaking and communicating capabilities.Physical requirements: standing, walking, bending, twisting, climbing, pushing, pulling, lifting up to 50lbs., seeing and reading.EGC is a merit shop contractor supporting a Team working environment. All Team members will be required from time to time to perform other duties they are qualified to perform, outside of this job description and their normal work function.All EGC employees are required to comply with our Substance Abuse Prevention Policy as a condition of employment. EGC Construction may condition offers of employment upon taking and passing of a post-offer/pre-employment drug screen.We provide an excellent and comprehensive compensation package with unlimited opportunity for personal and professional growth. If you would like to join our team of employee-owners and are interested in a challenging and rewarding career, please visit our website athttps://www.egcconst.com/careers/EGC Construction is an equal opportunity employer, and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability status, veteran status, sexual orientation or gender identity.EGC is committed to a diverse workforce.

We are growing and looking for an Estimator to join our team for HVAC Commercial work for Plan/Spec and Design/Build who will be responsible for accurately assessing and calculating the cost of commercial HVAC installation, maintenance, and repair projects by analyzing blueprints, specifications, and site conditions, determining necessary materials and labor, and preparing detailed cost estimates for potential clients, ensuring profitability and project feasibility while maintaining strong customer relationships.Education and Experience:• High school diploma required preferred but not required Associate's degree or Construction Management Degree• Minimum of 5 years of experience in commercial construction projects Fimiliar with types of Estimating software - such as ServiceTitan, PlanSwift, QuoteSoft, ArcSite, FastDUCT, and ServiceTrade, which all offer features like detailed takeoff capabilities, equipment selection, pricing models, and report generation specifically designed for commercial estimating needs.Key Responsibilities:• Site Visits and Project Analysis:Conduct on-site inspections of commercial properties to evaluate existing HVAC systems, identify project needs, and gather necessary measurements and data for accurate estimating.• Blueprint Review:Thoroughly analyze architectural and engineering blueprints to understand project scope, system layouts, and equipment requirements.• Cost Estimation:Develop detailed cost breakdowns including materials (units, ductwork, controls), labor (installation, service, maintenance), and potential contingencies, considering factors like project complexity, access limitations, and local regulations.• Proposal Preparation:RFP, RFQ preparation for bidding opportunities Create comprehensive proposals outlining project scope, proposed equipment, estimated costs, project timeline, and payment terms for client review and presentation.• Vendor Management:Source and negotiate pricing with HVAC equipment suppliers, subcontractors, and material vendors to ensure cost-effectiveness.• Customer Interaction:Meet with potential clients to discuss project needs, answer questions, present estimates, and address concerns.• Software Proficiency:Utilize estimating software to generate accurate calculations, create detailed reports, and manage project data.• Compliance:Adhere to industry standards, building codes, and safety regulations in all project estimations.Required Skills and Qualifications:• Technical Expertise:Strong understanding of commercial HVAC systems, including design principles, equipment selection, installation procedures, and maintenance practices.• Estimating Skills:Proven ability to accurately calculate project costs, considering labor rates, material pricing, and potential contingencies.• Blueprint Reading:Proficiency in reading and interpreting architectural and mechanical blueprints to understand project requirements.• Communication Skills:Excellent verbal and written communication to effectively present proposals, explain technical details to clients, and collaborate with internal teams.• Computer Literacy:Familiarity with estimating software, CRM systems, and Microsoft Office applications.• Sales Acumen:Ability to identify customer needs, build rapport, and negotiate project terms to secure contracts.Comprehensive Benefits, Medical / Dental , 401K , PTO Let's Talk!!

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Trailer Mechanic will perform preventative maintenance on UPS Transportation Trailers and Converter Dollies.? Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems.? The ideal candidate will possess the following:Current documented trailer mechanic experienceExperience using diagnostic equipment, scan tools and personal computerPossess a full complement of personal hand toolsResponsibilities & Duties:Meet D.O.T requirementsBend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workdayReport to work on a regular and timely basis and complete the scheduled workday on a consistent basisAbility to work varying shifts, additional hours and/or overtime depending on service needsSitting required infrequently throughout the duration of the workdayLift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 poundsAssist in moving packages or equipment up to 150 poundsSimple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasksOperate standard/manual transmissionOperate power, pneumatic toolsRequired to wear personal protective equipmentWork in an environment with: variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weatherHave a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions.Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $37.75 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

Our Sanford NClocationis seeking aMaintenance Plannerto join the team. As a Maintenance Planner you will be a key member of the site’s maintenance and reliability team. With a focus on maintenance planning, engineering support and inventory management you will be able to make an impact with this opportunity. Why work for Noble Oil Health and Safety is our #1 priority and we live it 3-6-5Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsOpportunities for growth and development for all the stages of your careerResponsible for coordinating and scheduling daily job plansAnalyze maintenance repair specifications to determine tools, parts and human resource requirementsFacilitate communication between maintenance and other onsite departments in the refineryAssist with bi-annual turnaround planningWork with Maintenance Manager to ensure KPI’s tracked by CMMS are metPerform equipment reliability analysis and recommend improvements based on Root Cause Failure Analysis (RCFA) findingsAspire to grow into an understanding of equipment reliability improvements through analysis of equipment trends, historical and field data to identify performance driversAssist with site engineering support for turnarounds.Responsible for ordering parts according to lead timesMonitor critical parts inventory levels to achieve necessary levelsUpdate proprietary CMMS with data regarding labor hours, parts usage and contractor repair costsResponsible for organizing the maintenance warehouse and receiving areaCreate purchase orders for approval by management, based on quotes received from vendorsReceive and match invoices, documenting any discrepanciesWhat does it take to work for Noble Oil 3 years as a Maintenance Planner and/or Maintenance Project Management6 years of Industrial or manufacturing type experience preferred3 years’ experience with a CMMS (Computerized Maintenance Management Software)Strong analysis, cleansing/scrubbing and organizing data skillsMust be able read, understand and apply technical information from manuals, books, drawings and diagramsProficiency in MS Office Suite Excel, Word and ProjectGantt Chart experience is a plus!Must be detail oriented and meet deadlinesExcellent communication with all levels of an organizationMust be able to influenceMust be able to lift up to 50lbs, climb ladders, stand for long periods, stoop, bend, reach etc. Safety-Kleen Systems,a Clean Harbors company, has a commitment to excellence deeply rooted in a strong sense of tradition. Our entire business model revolves around keeping North American businessesgreen. We generate more than $1.2 billion in annual revenue as a world-class environmental service organization and market leader in industrial hazardous waste management, parts-cleaning technology, and oil re-refining. We collect over 200 million gallons of used motor oil each year and we have the largest re-refinery capacity in North America allowing us to re-refine more than 150 million gallons each year.Every day, we help our customers resolve their waste management needs and reduce their carbon footprint.PROTECTION. CHOICES. PEOPLE.MAKE GREEN WORK. Safety-Kleen Systems,a Clean Harbors company, is a Military & Veteran friendly company. *SK #LI-AN1

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .