Winston-Salem, NC 27103 • (18.2 miles) • Full Time • 9/19/2026

Pump Truck Apprentice CDL Class B & Dump Truck Experience RequiredJoin Our Team of Skilled Technicians!We are looking for a dedicated and hardworking Pump Truck Apprentice with a valid CDL Class B license and dump truck driving experience. This is a great opportunity to build a career in the field while working alongside experienced technicians and learning the trade from the ground up.Key Responsibilities Assist pump truck technicians with daily operations, including setup, maintenance, and cleanup of job sites.Follow predetermined routes to service assigned locations.Pump out waste, clean units, refill water, and restock supplies as needed.Operate and drive dump trucks and pump trucks safely and efficiently.Perform routine inspections of trucks and equipment.Provide excellent customer s

Kernersville, NC • (5.4 miles) • Full Time • 9/19/2026

Position SummaryWe’re hiring dependable Pipe Crew Laborers to support excavation and installation of underground water lines, sanitary sewer piping, manholes, and storm drainage systems. This is a handson, physical role on active job sites across the Triad area.What you’ll doAssist with trenching, pipe laying, jointing, bedding, backfill and compaction.Set up and maintain traffic control and site housekeeping.Secure and move materials, load/unload trucks, and maintain tools/equipment.Support equipment operators (spotting, guiding loads, moving hoses/cables).Help install manholes, inlets, and perform basic concrete/asphalt patching as needed.Follow project plans and direction from crew leaders.Schedule & Work ConditionsStart time: 7:00 AM on site daily.Typical workweek: 50+ hours (overtime

Kernersville, NC • (5.4 miles) • Full Time • 9/19/2026

The Overhead Crane Operator is responsible for the safe and efficient operation of overhead cranes to handle heavy industrial materials in a mixed work environment. This role requires precise load handling, strict adherence to safety protocols, and effective communication with site supervisors, operations managers, and safety officers to ensure smooth coordination on site.ResponsibilitiesOperate overhead cranes to lift and transport heavy industrial materialsEnsure proper load handling and secure placement according to specificationsAdhere to all safety compliance standards and operational proceduresCommunicate clearly using hand signals and radio with team members and supervisorsCoordinate work activities with site supervisors, operations managers, and safety officersPreferred Qualificati

Kernersville, NC • (5.4 miles) • Full Time • 9/19/2026

Job Overview:As a Commercial Electrician, you will be responsible for installing, maintaining, and repairing electrical systems in commercial buildings.Responsibilities:· Install, maintain, and repair electrical systems in commercial buildings· Read and interpret blueprints, schematics, and electrical diagrams· Perform electrical installations according to local codes and regulations· Troubleshoot electrical issues and make necessary repairs· Collaborate with other team members to complete projects on time and within budget· Ensure all work is completed safely and in compliance with safety standards· Keep accurate records of work performedSkills:To be successful in this role, you should have the following skills:*Must have at least 3 years of experience*· Proven experience as a Commercial

Greensboro, NC 27408 • (10.3 miles) • Full Time • 9/19/2026

Measure, layout, and securely hang artwork using professional tools and proper hardwareDrill, anchor, and mount artwork on various wall types (drywall, plaster, wood, concrete)Ensure artwork is level, aligned, and installed per client specificationsAssemble and install furniture according to designer needsPerform light furniture repairs and adjustments as neededSafely use ladders, lifts, and hand/power toolsProtect artwork, furniture, walls, and floors during installationCommunicate with team members and clients regarding placement and adjustmentsMaintain a clean and organized work area after each job\nCompany DescriptionCareful With The China is a full service FF&E installation for commercial interior designers.Company DescriptionCareful With The China is a full service FF&E installation

Thomasville, NC 27360 • (16.2 miles) • Full Time • 9/19/2026

Project Manager – Construction / Industrial ServicesIdeal Candidate ProfileWe are seeking an experienced Project Manager with a proven track record in the construction, industrial services, waste management, environmental services, or related industries. The ideal candidate will have strong leadership skills, experience managing multiple projects simultaneously, and the ability to oversee project execution from inception through completion while maintaining safety, quality, schedule, and budget expectations.Preferred Industry BackgroundCandidates with experience in one or more of the following industries are highly preferred:Industrial ServicesConstructionWaste ManagementEnvironmental ServicesHeavy Civil ConstructionIndustrial MaintenanceDemolitionSite DevelopmentUtilitiesManufacturing or

Greensboro, NC 27407 • (8 miles) • Full Time • 9/18/2026

Bassett Furniture – Design Sales OpportunityDo you love interior design? Do you have an eye for color and fashion?Would you like to help customers see their dream rooms become a reality?If you are a positive and motivated professional with a passion for design, possess exceptional selling skills, and a love for building customer relationships, then Bassett Furniture has the opportunity for you!Job DescriptionOur Bassett Design Consultants are responsible for building meaningful and long-term customer relationships. They have comprehensive knowledge ranging from furniture construction to design trends. They use “relationship selling” techniques through interior design consultations and makeovers to maximize selling opportunities. Our design consultants take joy in the design process!Job Qua

High Point, NC 27265 • (5.1 miles) • Full Time • 9/18/2026

We are seeking a detail-oriented Construction Project Accountant to support the financial management of multiple construction projects with a great Triad company. This role is responsible for project cost accounting, billing, contract administration, budget tracking, job cost analysis, and financial reporting. The ideal candidate will have experience in the construction industry and a strong understanding of WIP schedules, lien waivers, change orders, and project-based accounting. Key ResponsibilitiesManage all accounting activities for assigned construction projects.Review and process project-related invoices, purchase orders, and subcontractor payments.Track project costs, budgets, commitments, and contract balances.Prepare and submit owner billings, AIA payment applications, and progres

Greensboro, NC • (9.5 miles) • Full Time • 9/18/2026

Come for a Job....Stay for a CareerMatthews Specialty Vehicles - the leading manufacturer in custom made vehicles - is seeking Electricians at our new Greensboro facility that is air conditioned & heated. This is our 30th year in business...come be a part of the Matthews family.Pay starts at $19+...depending on experience,· Read blueprints or technical diagrams· Install and maintain wiring, control, and lighting systems· Inspect electrical components, such as transformers and circuit breakers· Identify electrical problems with a variety of testing devices· Repair or replace wiring, equipment, or fixtures using hand tools and power tools· Follow state and local building regulations based on the National Electric Code & Automotive Codes· Direct and train workers to install, maintain, or repa

Rural Hall, NC • (19.7 miles) • Full Time • 9/18/2026

Northedge, LLC is a growing commercial drywall and metal framing company serving clients throughout North Carolina and Virginia. Our projects include healthcare facilities, higher education, mixed-use developments, and other commercial construction projects.We're looking for an experienced Commercial Drywall & Metal Framing Estimator to join our team in Rural Hall, NC.This is an in-office position for someone who understands the full estimating processfrom reviewing plans and performing takeoffs to developing competitive proposals and handing awarded projects off to the operations team.What You'll DoPrepare accurate and competitive estimates for commercial drywall, metal framing, ceilings, and related scopes.Perform quantity takeoffs and develop labor, material, equipment, and subcontracto

Greensboro, NC • (9.5 miles) • Full Time • 9/18/2026

The Welding Fabricator plays a crucial role in constructing metal structures and components by performing precise welding and fabrication tasks. This position involves interpreting blueprints, cutting materials, assembling parts, and ensuring the proper maintenance of tools and equipment while rigorously adhering to safety protocols.ResponsibilitiesPerform welding and metal fabrication tasks according to specificationsRead and interpret blueprints for accurate construction and assemblyCut materials to required dimensions using appropriate toolsAssemble fabricated components into finished productsMaintain tools and equipment in proper working conditionEnsure compliance with safety standards and proceduresSet up welding and fabrication equipment for daily operationsPreferred Qualifications2+

Lexington, NC • (24.3 miles) • Full Time • 9/18/2026

Landscaping Crew Member The Bradley GroupThe Bradley Group is looking for a dependable, hardworking Landscaping Crew MemberResponsibilities:Mowing, edging, trimming, and blowingPlanting, mulching, and landscape maintenanceGeneral cleanup and property maintenanceOperating landscaping tools and equipmentRequirements:Reliable and hardworkingAble to work outdoors in hot weatherAble to lift up to 50 lbs.Landscaping experience preferred but not requiredValid driver's license is a plusApply today and join The Bradley Group!Work Location: In person

Kernersville, NC • (5.4 miles) • Full Time • 9/17/2026

We are looking for excavator operators and or pipe layers with experience to join our team! Experience is preferred, but willing to train. You must be dependable, hard working, and ready to work. Pay rate based on experience for type of work. We look forward for you to join OUR Team!

Winston-Salem, NC 27107 • (11.1 miles) • Full Time • 9/17/2026

About the Role:Primary Electric LLC is looking for a skilled Residential Electrician to join our growing team in Winston Salem, NC! This is a fantastic opportunity to do meaningful work in a hands-on role where your expertise keeps homes safe, powered, and up to code. If you take pride in quality craftsmanship and love solving electrical challenges, we want to hear from you.Responsibilities:Install, maintain, and repair electrical systems in residential propertiesRead and interpret blueprints, wiring diagrams, and electrical schematicsPerform panel upgrades, circuit installations, and service changesTroubleshoot and diagnose electrical faults, outages, and wiring issuesEnsure all work meets NEC code requirements and passes inspectionsInstall outlets, switches, lighting fixtures, ceiling fa

Eden, NC 27289 • (32.8 miles) • Full Time • 9/17/2026

We're currently seeking a reliable and safety-conscious Driver to join our growing team. As a Driver, you will be responsible for safely transporting equipment, materials, and crew members to and from job sites. You will also assist with general labor and job site support as needed. Preferably a Spanish-English speaking individual.Key Responsibilities:Provide your own vehicle to arrive at the job site daily.Drive and operate the company truck to pick up and deliver materials, tools, and supplies for underground utility crews.Load and unload equipment, including handholes, conduit, and other materials.Shovel and spread gravel, load dirt into trailer, and assist with backfilling and clean-up tasks.Perform site restoration, including grading, minor landscaping, and debris removal as needed.Co

Winston-Salem, NC • (15 miles) • Full Time • 9/16/2026

Build Your Career with Ashley Furniture!Licensed HVAC Technician - 5 Years Commercial ExperienceAt Ashley Furniture,we'reone of the world's largest manufacturers of quality home furnishings. Our facilities span multiple industries including manufacturing, warehousing, distribution, retail, and corporate operations.We'recommitted to creating a safe, comfortable, and efficient work environment for our team members, and our HVAC systems play a vital role in achieving that goal. Join a company that values craftsmanship, innovation, and the skilled trades professionals who keep our operations running smoothly.Key ResponsibilitiesInstall, repair, and troubleshoot HVAC systemsincluding rooftop units, air handlers, chillers, boilers, and air distribution systems according to specifications and bui

Kernersville, NC • (5.4 miles) • Full Time • 9/16/2026

Commercial Drywall Estimator – Deliver Accurate Interior Bids for Shields, Inc.Job OverviewCompany: Shields, Inc.Salary/Pay Rate: $70,200 - $98,800 per yearLocation: Winston-Salem, NCJob/Employment Type: Full TimeProject Scope: Commercial, Industrial, and Government/FederalMandatory Licences & Certifications: None RequiredThe OpportunityAs a Commercial Drywall Estimator at Shields, Inc., you will drive the bidding process for high-profile commercial interior projects. You will turn complex project plans into accurate, competitive cost proposals that fuel business growth. This role allows you to combine technical expertise with commercial strategy within a supportive, employee-focused culture.How You Will Make an ImpactPerform detailed quantity takeoffs for drywall, metal framing, insulatio

Kernersville, NC 27284 • (5.5 miles) • Full Time • 9/16/2026

Position Overview:We are seeking a plumbing technician to perform a variety of residential and commercial plumbing services, including installation, repair, maintenance, and diagnostics. The ideal candidate is knowledgeable, mechanically inclined, safety-conscious, and comfortable working independently while also being part of a team.This position requires strong technical skills, attention to detail, good communication, and a commitment to providing quality workmanship on every job.Candidates should be experienced with:Building rapport with customersAsking questions to understand the customer's needsExplaining diagnostics and recommendationsPresenting multiple repair and replacement options when appropriateAnswering questions about the recommended workHandling customer concerns profession

High Point, NC • (5.9 miles) • Full Time • 9/16/2026

McRae Roofing, Inc - LaborerThis is a unique opportunity to take control of your career path and develop skills that can fast-track your advancement. McRae Roofing invests in our Team Members by empowering success through a structured advancement plan and training courses. We value our Team Members by providing competitive benefits, prioritizing safety, and emphasizing work-life balance.McRae Roofing Company is an industry leader in providing outstanding experience in commercial roofing, metal fabrication, and more. We pride ourselves on over 75 years of quality work, investing in our Team Members, and providing a family-centered culture.· Weekly pay· Paid on-the-job training – no previous roofing experience requiredApply today if this sounds like the opportunity you have been looking for!

Elon, NC 27244 • (29.9 miles) • Full Time • 9/16/2026

Key Responsibilities:Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Assess welded surfaces, structures and components to identify errors.Weld components in flat, vertical, and overhead positions.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair welding machinery.Follow and enforce strict safety regulations such as wearing heat-resistant gloves, protective masks, and safety shoes.Monitor machinery for appropriate usage and temperature.Qualifications:A minimum of 2 years’ experience as a welder.High school diploma or equivalent qualification.A valid certificate in welding from an accredited institution is preferred.Excellent knowled

Winston-Salem, NC 27101 • (11.6 miles) • Full Time • 9/15/2026

Flux Core/MIG Welder Pay & Schedule$23-$26/hourWeekend Shift: Additional 10% shift differential1st Shift: Monday-Thursday, 6:00 AM-4:00 PM, with overtime on FridayWeekend Shift: Friday-Sunday, 6:00 AM-6:00 PM, with overtime on Monday or ThursdayJob Overview We are hiring experienced Welders to fabricate and assemble overhead cranes in a manufacturing environment. This role involves MIG and Flux Core welding, reading blueprints, and working with steel fabrication equipment.ResponsibilitiesPerform MIG and Flux Core welding on structural steel.Read blueprints and fabricate parts to specifications.Cut, fit, and assemble steel components.Operate fabrication equipment, hand tools, and power tools.Inspect completed work and ensure quality standards are met.Assist with assembly and troubleshooting

High Point, NC 27263 • (12 miles) • Full Time • 9/15/2026

Aerial Foreman We are a Growing Utility Contracting Company seeks the following:· Experienced Lineman to lead an Aerial crewRequirements:• High school diploma or General Education Diploma (GED) preferred• Previous experience in standard and high-risk areas a preferred• Experienced in Aerial fiber and coax construction• Previous experience in operating a T-40 or equivalent preferred• Knowledge of Aerial telecommunications strand, cable and fiber placement• General knowledge of Aerial strand, cable and fiber construction practices• Must be able to read and understand HFC design prints• Must possess a valid Driver’s License (CDL) is a plus but is not required• Ability to work in various environments/settings with moderate to loud noise levels• Capable of working at heights up to 60ft above th

Greensboro, NC 27401 • (12.7 miles) • Full Time • 9/15/2026

Job Overview:D7 Pneumatics LLC is seeking highly skilled and experienced Millwright with strong welding capabilities to join our maintenance division team for our scheduled fall shutdownsThis role will involve maintaining, repairing, and installing industrial machinery across steel mills. The ideal candidate will have a solid background in mechanical systems, a strong understanding of welding techniques, and the ability to work in a fast-paced, safety-focused environment.Key Responsibilities:Maintenance & Repairs: Troubleshoot, repair, and maintain mechanical equipment, conveyor systems, crushers, pumps, motors, gearboxes, and other industrial machinery in coal mining operations, sawmills, and auto plants.Welding & Fabrication: Perform welding (MIG, TIG, Stick) for repairs and fabrication

Greensboro, NC 27401 • (12.7 miles) • Full Time • 9/15/2026

W & W Crane has a fleet of mobile, hydraulic cranes ranging from 28 to 210 tons.In addition to crane lifts, as an operator for W&W Crane, you will be responsible for driving to and from jobsites as well as the set up and tear down of cranes.The bulk of our crane work consists of setting modular homes, HVAC units, and tree work.Jobs are daily, so you'll be home every night.Minimum Qualifications:NCCCO certificationValid Class A Commercial Driver’s License (CDL) issued by the state of residence.Clean driving record with no major violations or accidents in the past three years.Ability to pass DOT physical examination and drug screening.Proven experience operating commercial motor vehicles safely and efficiently.Compensation:Competitive PayHealth Insurance BenefitsVacation and Holiday PayRetir

Greensboro, NC • (9.5 miles) • Full Time • 9/14/2026

Do you want to learn a craft that almost nobody knows how to do anymore?We're hiring Window Restoration Technicians to learn historic wood sash and door restoration, the kind of work that keeps 100-year-old buildings standing for another 100 years.No historic window or door experience required.What we're looking for is hands-on skill we can build on, attention to detail, and a willingness to travel for a week or two at a time to incredible historic sites across the Southeast.About Double HungDouble Hung was founded in 1997 for a stubborn reason: our founder, David Hoggard, was tired of watching well-built windows and doors get torn out and thrown away. Nearly thirty years later, we're one of the most trusted restoration partners to general contractors, homeowners, municipalities, and devel

Winston-Salem, NC • (15 miles) • Full Time • 9/14/2026

ProTrade is seeking a skilled Electrician with bucket truck experience. This role is perfect for someone with solid electrical skills who’s comfortable working at heights and committed to safety and quality craftsmanship.Responsibilities:Operate a bucket truck safely for overhead electrical workInstall, maintain, and repair outdoor lighting, signs, and electrical systemsRead and interpret electrical schematics, and job layoutsPull wire, install fixtures, and troubleshoot systemsWork at heights and in outdoor environments in varying conditionsFollow all OSHA, job site, and company safety protocolsRequirements:Experience operating a bucket truck and working on elevated job sitesComfortable with tools of the trade and electrical troubleshootingMust have valid driver’s license with a clean dri

Lexington, NC • (24.3 miles) • Full Time • 9/14/2026

We are hiring an experienced Industrial Electrical Superintendent to lead a major industrial project in Lexington, North Carolina. This is a hands-on leadership role responsible for managing field operations, supervising crews, and ensuring all work is completed safely, on schedule, and to high-quality standards.Job Details Location: Lexington, NC Start Date: Mid-September (estimated) Pay: $35–$45/hr (DOE) – higher pay available for highly qualified candidates Per Diem: To be determinedResponsibilities Lead daily field operations on an industrial electrical project Supervise and coordinate electrical crews Maintain project schedule, quality, and safety compliance Communicate with project management, clients, and field teams Manage manpower, materials, and jobsite logistics Provide strong l

Greensboro, NC • (9.5 miles) • Full Time • 9/13/2026

Richard L Pegram Electrical Company is looking for a dependable and motivated Electrical Apprentice to join our team in Brown Summit North Carolina.The Electrical Apprentice will work alongside and assist the head electrician with a variety of electrical tasks. We are looking for someone who has some previous experience in the electrical field, is willing to learn, and takes pride in doing quality work.\nCompany DescriptionSmall, family owned business, which pride itself on quality work.Company DescriptionSmall, family owned business, which pride itself on quality work.

Winston-Salem, NC • (15 miles) • Full Time • 9/13/2026

General Superintendent – Structural Steel Erection (Multi-Project Leadership)Structural Steel Erection | Full-Time | Travel RequiredCompany:Piedmont Steel Company, LLCBased In:Winston-Salem, NCPrimary Work Area:Northern Virginia (Ashburn / Manassas) + Southeastern U.S.Position SummaryThe General Superintendent serves as PSC's senior field leader, providing leadership and support across multiple structural steel erection projects throughout the southeastern United States.This position works closely with company leadership, project managers, superintendents, and foremen to improve field performance, mentor future leaders, support project execution, and ensure PSC maintains the highest standards of safety, quality, productivity, and professionalism.Rather than being assigned to a single proje

Asheboro, NC • (26.9 miles) • Full Time • 9/13/2026

Facilities Electrician The Facilities Electrician installs, maintains, troubleshoots, and repairs electrical systems serving buildings, grounds, and production support equipment. This position works across multiple facilities and is expected to complete electrical work safely, accurately, and in accordance with applicable codes, company standards, and individual qualifications. Schedule: Monday through Thursday 6:00 am to 4:30 pm with overtime, travel between locations, and on-call work as necessary. Responsibilities: · Install, maintain, troubleshoot, and repair facility lighting, receptacles, branch circuits, panels, disconnects, transformers, motors, controls, and related electrical systems. · Bend and install Rigid, IMC, and EMT conduit with minimal supervision. · Pull, label, termina

Winston-Salem, NC • (15 miles) • Full Time • 9/11/2026

Painting Prep Technician – 1st Shift (Manufacturing)Location: Winston-SalemPay: $22-$25/hr (Based on Experience)Schedule: 7:00 AM – 3:30 PM + Overtime AvailableSkilled Trades Services is NOW HIRING experienced Painting Prep Technicians for a fast-paced manufacturing environment!If you’ve got an eye for detail and take pride in clean, high-quality prep work this is a great opportunity to get your foot in the door with a company that values skilled hands.What You’ll Be Doing:Surface prep including sanding and cleaning materialsApplying primer and prepping parts for final paintTaping/masking areas for precision paintingPerforming bondo/body filler work as neededEnsuring surfaces meet quality standards before paint applicationWorking in a production-driven manufacturing settingSchedule & Proje

Reidsville, NC • (25.5 miles) • Full Time • 9/11/2026

Position SummaryIsometrics, Inc. is seeking skilled and detail-orientedAluminum Welders/Fabricatorsto join our team manufacturing aircraft refueling tanks and mission-critical refueling equipment for the United States military.This position focuses primarily on the fabrication and welding oflarge aluminum tank assemblies. The ideal candidate will have experience with aluminum MIG and/or TIG welding, blueprint reading, weld symbols, and general metal fabrication. Tank welding experience is preferred but not required for candidates with strong aluminum welding skills and the ability to produce consistent, high-quality work.Our products are built to demanding quality and performance requirements, making attention to detail, workmanship, and consistency essential.Key ResponsibilitiesPerformMIG

Greensboro, NC • (9.5 miles) • Full Time • 9/9/2026

Restaurant Maintenance Technician (HVAC & Refrigeration)Cook Out Restaurants | Competitive Pay + Sign-On BonusesAre you a skilled technician looking for a stable, fast-paced environment with an elite team? Cook Out Restaurants is growing, and we are looking for an experienced Restaurant Maintenance Technician to join our dedicated maintenance department. At Cook Out, we don’t just fix thingswe keep the engine running. You will manage shake machines, refrigeration and HVAC systems while being cross-trained on “hot side” kitchen equipment.Why Join the Cook Out Team?Sign-On Bonuses: $500 and $1,000 (Paid after required employment period).Comprehensive Benefits: Medical, Dental, and Vision Insurance.Financial Security: Company-paid Life Insurance & 401k matching (up to 4% after 1 year).Work-Li

Greensboro, NC • (9.5 miles) • Full Time • 9/9/2026

The Agency, Inc. in Greensboro, NC has immediate placements for experienced welders in Brown Summit:MIG , TIG & TACK welding experience requiredMust be able to read blueprintsMust be reliable and have own transportationWelding test and interview requiredMonday through Friday 7:30am to 4:30pmExcellent payPlease apply at: 500 East Cornwallis Drive Suite M, Greensboro NC 27408Please bring 2 valid forms of ID for the application process (no appointment needed).We look forward to seeing you!\nCompany DescriptionEstablished in 1984, The Agency Inc is a complete employment service serving central North Carolina as a provider of diverse client employment needs, including payroll, employee screening, and temporary and permanent personnel staffing services. As a woman-owned company under the same ow

Greensboro, NC • (9.5 miles) • Full Time • 9/9/2026

Company Logo Overview Keller North America, Inc. is a leading drilled foundation, earth retention, and geotechnical specialty contractor with offices located throughout the United States. Keller routinely develops innovative, practical, and cost-effective solutions to challenging geotechnical problems for its customers. As the leader in the geotechnical construction industry, we are always looking to expand our team and find personnel willing to grow within our company.We are looking for a Dewatering Area Manager based in the Southeastern United States.Responsibilities This newly created role will be responsible for area success including the achievement of operational, project and, financial goals.Business Development and Proposal PreparationsLeads the area construction dewatering team in

Burlington, NC • (29.4 miles) • Full Time • 9/9/2026

Join Our Team!Company: Emerald Green, IncLocation: Burlington, NCPosition: Lawn Care TechnicianAre you passionate about the outdoors and dedicated to exceptional service? Do you thrive in a hands-on, team-oriented environment? If so, we want you to join our growing team at Emerald Green Inc.!About UsAt Emerald Green Inc. , we pride ourselves on delivering top-notch lawn care services. Our commitment to our customers and community drives everything we do. As we continue to grow, we are looking for motivated individuals to grow with us.Positions AvailableOur growing company is seeking a Lawn Care Technician. You will be the boots on the ground, ensuring that our clients’ lawns and landscapes receive the highest level of care and attention. You’ll have the opportunity to work outdoors, learn

Greensboro, NC • (9.5 miles) • Full Time • 9/8/2026

Aluminum Welder/FabricatorPosition SummaryThe Aluminum Welder/Fabricator is responsible for welding, fabricating, and assembling aluminum components and structures according to engineering drawings, specifications, and production schedules. This position requires strong fabrication skills, attention to detail, and the ability to produce high-quality welds while maintaining safety and efficiency standards.Essential Duties and Responsibilities• Perform MIG and TIG welding on aluminum materials and components • Read and interpret blueprints, shop drawings, and work orders • Fabricate and assemble aluminum parts, frames, and structures to specification • Measure, cut, grind, and fit materials prior to welding • Inspect completed welds to ensure quality and structural integrity • Operate fabric

Greensboro, NC • (9.5 miles) • Full Time • 9/7/2026

Lead the Crew. Build the Infrastructure.JGR Development Group is seeking an experienced Utility Crew Foreman to lead underground utility crews on water, sewer, and storm drainage projects throughout North Carolina. This position is responsible for supervising daily field operations, coordinating manpower and equipment, maintaining production schedules, and ensuring all work is completed safely and in accordance with project plans and specifications.The ideal candidate is a proven leader with extensive underground utility experience who can manage crews, communicate effectively with project managers and inspectors, and maintain high standards of quality, safety, and productivity.ResponsibilitiesLead and supervise underground utility crews installing water, sewer, and storm drainage systems.

Greensboro, NC 27406 • (13.8 miles) • Full Time • 9/5/2026

SUMMARY:The HVAC Service Technician serves customers by installing and servicing systems and products. This position fosters positive customer interactions by identifying system issues and completing repairs to the satisfaction of the customer and the company.ESSENTIAL DUTIES AND RESPONSIBILITIES:The requirements listed below are representative of the knowledge, skill, and/or ability, and physical demands required. Serves existing accounts by analyzing service orders, planning daily travel schedules, investigating complaints, conducting tests and resolvingproblems.Establishes service by studying system requirements, ordering and gathering components and parts, completing installation and performing acceptancetests.Maintains rapport with customers by examining complaints, identifying soluti

Kernersville, NC 27284 • (5.5 miles) • Full Time • 9/5/2026

Join a company that makes a difference every day. The environment needs us, and we need you!Envirowaste Services Group and KRG is looking for a Heavy Equipment Operator in your area. We offer a fantastic benefits package, competitive pay, and opportunity for growth! Paid training, education/certification opportunities and more.This is a 40 plus hour-a-week position with the possibility of weekends and overnight travel. This is a great opportunity to become part of a growing company.Position Overview: As a Dump Truck Driver, you will be responsible for safely operating and maneuvering heavy-duty dump trucks to transport materials such as soil, gravel, rocks, or other materials to and from construction sites, quarries, or waste disposal facilities. The ideal candidate will have a strong unde

Greensboro, NC • (9.5 miles) • Full Time • 9/4/2026

This is a full-time, on-site role for a Security Installation Helper located in Greensboro, NC. The Security Installation Helper will assist with installing, maintaining, and repairing security systems, including surveillance cameras, access control systems, and alarm systems. The role involves working under the guidance of a lead technician, handling equipment, and ensuring installations meet safety and quality standards. The position may also require collaboration with clients to understand their security needs and provide excellent customer service.Qualifications• Basic knowledge of security systems and components, including alarm systems, surveillance cameras, and access controls• Familiarity with tools and equipment used in system installation, maintenance, and repair• Strong communic