We are looking for experienced Traffic Control Technicians to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Position Location: Browns Summit, North Carolina - Greensboro Browns Summit PlantJob Summary:The Senior Electrical and & Instrumentation Technician is responsible for enabling production throughput, reducing equipment downtime, troubleshooting issues, eliminating defects, and building technical mastery. They are a subject-matter expert in a specific technology, and they are capable of covering multiple areas during their shift. As the skills increase, they are capable supporting improvements and capital projects with the goal of delivering the best product, at the lowest cost, with the highest quality, and in a safe environment. In general, this role will be focused on electrical technical mastery in order to successfully troubleshoot problems and to proactively improve production systems.As a Senior Electrical and Instrumentation Technician you will be responsible for the following:Maintaining and troubleshooting high-speed packing, making, and facilities power & controls equipment.Collaborate with Operating and Project Teams to eliminate losses and improve electrical systems.Performing preventive maintenance and calibrations on equipmentTroubleshooting, monitoring, & programming PLC, SCADA, and HMI systemsTroubleshooting and monitoring variable frequency drives, servo control systems, roboticsTroubleshooting and repairing machine and process control equipmentAnalyzing trends and technical data to gain insights of the controls and identify issues proactivelyBuilding technical skills in othersApply electrical technical skills to support business.Acquire Low Voltage Qualification (up to 1,000V).Utilize tools to eliminate defects and improve systems (UPS, Y-Y, failure analysis, etc.).Be knowledgeable on the electrical systems on equipment in order to effectively troubleshoot issues and lead improvement projects.Be involved in all planned maintenance downtime events.Capable of advanced programming, set-up and configuration of electrical components (VFD’s, PLC’s, Servos, Flow Meters, Pressure Meters, communications, etc.).Conduct electrical troubleshooting (hardware and software) in support of Operating TeamsProactively monitor and maintain electrical field devices and power systems (execute PM’s, CIL’s, replace in-kind, calibrations, etc.).Execute electrical Maintenance Planning task.Demonstrate computer aptitude- acquire basic programming, set-up, and configuration of electrical components (VFD’s, servos, PLC’s, scales, communications, etc.)Interface with vendors, suppliers, or on-site construction teams.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.Job Responsibilities:Troubleshoot, diagnose and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks.Maintain a service van and its inventory.Process paperwork after completion of each job.Qualifications:High school diploma or equivalent.Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Valid driver's license, good driving record, and ability to safely operate lift trucks.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.Work Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEO/AA Employer Minorities/Females/Protected Veterans/Disabled

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Physical Therapists, Come Where You Can Grow and Progress In Your Career!Location: GreensboroNorth Carolina Licensed Physical Therapist “BreakThrough has opened upso many opportunities for me. I have been able to do residencies, fellowships, management and leadership courses, and there is no limit to success.” - Drew Schlabach, PT, DPT, OCSJob Type: Full-timePay: $70,000 to $100,000 / YearSign-on Bonus: Up to $10,000 sign-on bonus available.Compensation will be based on experience. How Confluent Health Supports You: Student loan repayment programFully paid trainings, certifications and education programs through Evidence in Motion (EIM) A focus to create a diverse, equitable, and inclusive workplace culture Comprehensive mentorship and career development Leadership and talent development opportunities Generous Paid Time Off Industry leading Medical, Dental, Vision, LTD insurances 401(k) Employer Matching Family Building and Parental Benefits You’ll achieve success by: Reviewing patients medical history Diagnosing patients by observing their movements and listening to their concerns Developing individualized treatment plans for patients with clear goals and expected outcomesUsing exercises, stretching, equipment, and hands-on manual therapy to manage patients’ pain, increase mobility, and prevent further pain and injury Recording patient progress and modifying the plan of care as needed Qualifications: Physical Therapist Licensure in good standing in State of North Carolina is required.CPR and first aid certification required Who We Are:BreakThrough Physical Therapy is a member of the Confluent Health family of outpatient physical and occupational therapy companies that is transforming healthcare by developing and educating today’s highly effective clinicians and by providing them with career development pathways to become industry leaders.BreakThrough Physical Therapy is a member of the Confluent Health family of physical and occupational therapy companies. Together, we are transforming healthcare by strengthening private practices and developing highly effective clinicians all across the country. Confluent Health and BreakThrough Physical Therapyprovides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Confluent Health and BreakThrough Physical Therapycomplies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Experienced and newly graduated Physical Therapists Apply Today!EOE#CH500

Overview: Come join our Annie Penn Rehab team to experience a variety of patient care, all in one place. We have 8 PT’s and 2 PTA’s, as well was OT’s and SLP’s that treat across the lifespan. We are located in the heart of Reidsville in a convenient location and less than a 30-minute drive from Greensboro. Our therapists qualify for “rural” pay – an additional $2.50/hour. We treat patients one-on-one for 45 minute sessions.This is a salaried position with competitive benefits including paid time off, medical, dental, vision, 403B, free Employee Assistance program, paid parental leave, paid education days, and more. This position will provide care to our pediatric clients.The Physical Therapist I evaluates patients conditions, develops personalized treatment plans, and implements therapeutic interventions to optimize functional abilities. This role works closely with patients, guiding them through exercises and techniques to improve mobility, strength, and flexibility. This role also educates patients on injury prevention, provides pain management strategies, and monitors progress throughout the treatment process. The Physical Therapist I monitors and evaluates outcomes related to the assessment and plan of care. This position requires guidance and mentoring for completion of the essential job functions. Responsibilities: Supports evaluations of patients' physical abilities, medical history, and functional limitations to develop individualized treatment plans.Administers therapeutic exercises and other physical therapy interventions to improve patients' strength, flexibility, and range of motion.Educates patients and their families on treatment plans, home exercises, and self-management techniques to improve recovery outcomes.Collaborates with others in developing and implementing discharge plans and recommendations for continued care.Monitors and documents patients' progress, treatment outcomes, and responses to interventions so that treatment plans can be adjusted as needed.Collaborates on teams from different departments to ensure coordinated patient care and holistic treatment outcomes.Performs other duties as reasonably required or assigned. Qualifications: EDUCATION:Required: Bachelor's degree in Physical TherapyEXPERIENCE:LICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:North Carolina license by the NCPT Board of Physical Therapy ExaminersBLS (CPR)-American Red Cross or AHA Healthcare Provider

Overview: The Registered Nurse (RN) delivers high-quality patient care and ensures positive patient outcomes through the compassionate and efficient application of nursing knowledge. Working under general supervision, this role promotes professional nursing practice by coordinating patient care through the nursing process and multidisciplinary collaboration.Talent Pool: Nursing Responsibilities: Reviews patient needs and conditions to deliver nursing care in assigned unit to ensure that every patient receives the direct and proper care needed.Analyzes patient information, including medical history, diagnostic results, and current condition, to develop individualized nursing care plans.Prepares nursing processes, such as medication administration and treatments to provide comprehensive and effective patient care.Reconciles medical records to ensure accuracy and compliance with regulatory standards and organizational policies.Evaluates patient response to interventions and identifies any additional interventions needed to meet defined goals of care.Collaborates with interdisciplinary care team to ensure effective care planning.Performs other duties as assigned. Qualifications: EDUCATION:Required: Associate's Degree in NursingPreferred: Bachelor's Degree in NursingEXPERIENCE:Required: 1 year as a Registered NursePreferred: 1 year in a clinical specialty as defined by ANCC or national nursing organizationsLICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:Registered Nurse license in North Carolina or a Compact stateBLS (CPR)-American Red Cross or AHA Healthcare Provider