Come work at the best place to give and receive care! Job Description:Who We Are:Healthcare facilities management and maintenance has the same purpose asany other maintenance department: to ensure optimal asset reliability and performance. We do this at The Elliot by proactively maintaining assets and infrastructures while also maintaining a respectable upkeep of the property.About the Job:Supports the Facilities Management department by maintaining and operating all mechanical equipment, systems, and spaces throughout the facility.What You’ll Do:Makes periodic checks of unmanned machinery spaces to check the operation of designated machinery.Acts appropriate to maintain or restore system/equipment to satisfactory operating condition.Starts and operates boilers, chillers, blowers, pumps, compressors, generators, cooling towers and other machinery to maintain plant operations.Observes system operations and ensures they are in accordance with established operating procedures and guidelines and switches boiler fuels, aligns fuel tanks and changes compressed gas bottles.Performs routine preventive maintenance and/or inspection tasks.Responds to various system alarms including, but not limited to, refrigeration, oxygen/piped gas, heating/cooling, boilers, and generators and acknowledges alarms, resets or takes appropriate corrective actions.Initiates “First Response” actions during emergency/contingency situations in accordance with established department policies, instructions, standing orders, disaster preparedness manual, hospital fire plan, code 2 protocol and established contingency plans.Maintains boiler room and machine room logs including, but not limited to, steam, fuel and water consumption data, feed water and flue gas test results, medical gas system parameters, tank levels, fuel and medical gas deliveries and HVAC system parameters.Monitors the activities of after-hour maintenance personnel, contractors, or vendor personnel.Who You Are: Education: High school diploma or equivalent required. Post-secondary school or vocational training preferred. Courses in plumbing, electrical, carpentry, welding, Sheet metal, automotive repair, ventilation, and clinical engineering preferred.Experience:A minimum of two-four (2-4) years of experience in plant operations and/or building maintenance required. Prior experience in a healthcare environment preferred.Certification/Licensure:Valid driver's license is required and must be maintained throughout the duration of appointment in position.Schedule: Generally, Monday through Friday.Why You’ll Love Us:Health, dental, prescription, and vision coverage for full-time & part-time employeesShort-term disability, long-term disability, and life insurance coverageCompetitive payTuition Reimbursement403(b) Retirement Savings PlanAnd more!#DMORequired Certifications:DRIVER'S LICENSE - ExternalRequired Education: Work Shift:Varies | Per DiemSolutionHealth is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, disability status, veteran status, or any other characteristic protected by law.

Job Description SummaryJob DescriptionAbout GE Aerospace:Are you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, curiosity, and unique ideas. Most importantly, you will share in our pride and purpose that affects the lives of millions around the world!About this position:The Lynn advanced programs (AP) section is a brand-new organization with the mission of inventing the future of flight and advancing propulsion capability for the next generation of military applications. Lynn AP supports a wide range of engineering activity including design, analysis, and testing across new, derivative, and existing engines.The lead engineer for fan airfoil mechanical design will own all aspects of airfoil mechanical design and development of one stage of the fan as a part of the fan module team. In this role, the lead engineer will utilize engineering experience and partner with teammates and technical experts to solve problems and recommend solutions. This role is best suited for a collaborative problem solver with a desire to deepen their mechanical design expertise and develop new solutions to challenging technical problems while balancing program requirements. Effectively working with teammates, technical experts, and peers in adjacent organizations will be necessary for successful project execution to impact short-term and long-term business goals.Working at our Lynn Facility:Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million square feet of manufacturing space, we’re making a huge contribution to the future of flight! The Lynn facility is the birthplace of the very first jet engine in 1942 and continues building upon this legacy with a deeply knowledgeable team building quality engines. Additionally, GE Aerospace has invested more than $100 million in facility improvements in the last five years alone. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward!This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P GlobalPOSITION SUMMARY: With direct supervision from a Lead Technician, Fleet Maintenance Supervisor or Maintenance Manager, a Maintenance Technician A performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components; refuse bodies, including control, hydraulic, and electrical systems; air brake systems; general engine work; HVAC components; and suspension, drive train and steering systems. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day.Maintain and repair highly intricate and powerful machinery.Receive training on new technologies and equipment.Work a regular shift in a stable industry.Be recognized for exceptional performance.Serve your community and your customers.Follow strong career paths for professional growth.Enjoy competitive wages and benefits.Join us and help make a positive impact on your community, your environment, and your world.PRINCIPAL RESPONSIBILITIES:Maintains advanced knowledge of, and strong skill proficiency in, the following vehicle components and systems, with the ability to perform complex repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; Air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning systems.Line maintenance welding and fabrication.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.QUALIFICATIONS:3 years of experience as a technician working on heavy-duty trucks.Ability to perform inspections and repairs without supervision in some (not all required) of the following heavy truck, or automotive systems: Suspensions & Steering, General Engine, Transmissions, Brakes, Electrical, Hydraulics, Drive Train, Diesel Emissions.ASE Heavy Truck Certifications (T1-T8) are a plus but not required.LNG and/or CNG experience is a plus but not required.Class B or higher Commercial Driver’s License is a plus but not required.MINIMUM REQUIREMENTSValid Driver’s License.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Are you a problem-solver who loves to be out in the field Our Appliance Techs provide mechanical repairs to washers and dryers at customer and client locations within their assigned region. Appliance Technicians keep our machines running smoothly to meet customer expectations or the need for repeated service needs. The ideal candidate is someone who enjoys working independently and has a very strong mechanical aptitude.Key Responsibilities: FULL TIME - MON THRU FRI - COMPANY VAN PROVIDED!!Service and Repair: Perform diagnosis, troubleshooting, and repair of appliances such as washing machines, dryers, and air-vending machines. Ensure that all repairs are carried out efficiently and in accordance with manufacturer guidelines and safety standards.Maintenance: Conduct routine maintenance and preventative services on appliances to ensure optimal performance and extend their lifespan. This includes cleaning, lubricating, replacing worn-out parts, and adjusting settings as necessary.Customer Service: Interact with customers in a professional and friendly manner, addressing their concerns and providing accurate information regarding the repair or maintenance process. Offer advice and recommendations on appliance usage, care, and maintenance to prevent future issues.Documentation: Maintain detailed records of service calls, repairs performed, parts used, and any other relevant information. Prepare service reports and update the internal database with accurate and up-to-date information.Parts and Inventory Management: Monitor and manage inventory levels of spare parts and tools. Order necessary parts and equipment to ensure the availability of required resources for efficient repairs and maintenance.Safety Compliance: Adhere to all safety protocols and guidelines while working with electrical systems and appliances. Ensure personal safety and the safety of customers' property during service calls. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral programCompany VehicleSchedule: Monday to Friday 7:00 am to 4:00 pm What we’re looking for: Valid Driver's LicenseAbility to pass pre-employment screeningPrevious experience in appliance repair or a related field (example: pool technician) is preferred.Good interpersonal and communication skills to interact with customers effectively.Ability to work independently and manage time efficiently.Physical stamina and dexterity to handle and maneuver heavy appliances.Basic computer skills for documentation and communication purposes.Must be able to lift up to 75 pounds and will frequently work in a variety of environmental conditions (both weather and non-weather related)Visit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Overview: GovCIO is currently hiring for an IT Service Technician to provide onsite support for our federal customer. This position will be located in Lawrence, MA and will be an onsite position. All contract personnel may be required to travel occasionally for site coverage. Responsibilities: The employee is part of a team that provides support for all onsite IT activities. They consult with support teams, help desks, customers and other technical staff in the resolution of problems. They coordinate and perform operation and/or maintenance activities for networks/servers. They identify recurring problems and recommend steps to reduce the severity or frequency of problems. They install, troubleshoot and maintain an extensive variety of products and equipment. They deliver services and solutions in technical support, systems refresh, software integration, and operations support. They identify, analyze, and repair product failures, and order and replace parts as needed. They provide onsite training of customer support personnel. Other specific duties include the following:Provide on-call support by identifying, researching and resolving technical problems received via the ServiceNow ticketing system.Interact with network services, software systems engineering, and/or applications development to restore service and/or identify and correct core problems.Recommend systems modifications to reduce user problems.Perform routine system maintenance and analysis functions, including hardware configurations and adding, removing and replacing equipment components.Install operating system patches, upgrades etc. via SCCM Software CenterProvides remote support services for telework/home users.Helps ensure user applications work over VPN and/or Citrix.Manage user relocation requestsEnsure devices are properly encrypted.Local On-Site CablingProvide on-site support for enterprise groups such as the network and security operation centers.Restart network equipment, including switches and routers as directed by enterprise networking.Replace defective network equipment.Wireless ServicesAssist users with mobile communication devices.Provide tier 2 support, including but not limited to hardware troubleshooting, OS reinstall, and assisting with device swapping.Asset Inventory SupportAssist with physical inventory as needed.Assist with receiving and receipting property.Disposal Preparation SupportProcess computer equipment for disposal.Ensure disposal policies are properly employed.Ensure all devices are fully wiped of information before leaving the facility.Video Conferencing and Audio/Video O&MTroubleshoot system problems and repairsWork with support staff for remote troubleshooting and repairs.Assist in setting up presentation devices and video conferencing units.Support pre/post application releasesGather analyze, and report end-user support trendsOther duties as assigned Qualifications: High School with 0 - 2 years (or commensurate experience)Required Skills and ExperienceUSCitizenHigh degree of technical proficiencyExcellent problem-solving skills and analytical abilitiesPreferred Skills and ExperienceMinimum 6 months’ experience troubleshooting Apple Macintosh software and hardware in a customer service roleCertification in Microsoft Operating SystemsFamiliarity with SCCM remote resolution and with using SCCM to remotely complete software installationCompTIA Network+CompTIA A+CompTIA Server+CompTIA Security+Clearance Required:Must be able to obtain and hold a Public Trust Clearance. Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $25.00 - USD $25.00 /Hr.

Be part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we will give you the space and opportunities to grow and succeed. We are committed to making a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do A Johnson Controls Security Technician is a troubleshooter and service expert possessing knowledge and experience with intrusion, IP CCTV, access control and fire alarm systems from multiple manufacturers. Candidate will possess strong verbal communication skills as they identify the needs of the customer and then inform them of next steps and processes to repair the system as needed to return full functionality. Candidate will possess skills and experience to inspect said systems to ensure proper functionality and provide written or digital reports to customer and company as needed.How you will do it Locate and alleviate trouble with damaged equipment or wiring.Readjust equipment, repair, or replace inoperative equipment and test for operation.Coordinate inspections and/or installations with police, fire departments, or other appropriate agencies.Performs repair and/or inspections of intrusion detection, IP CCTV, Access Control systems and fire alarms (if applicable).Assists fellow service technicians with system repairs and completes minor repairs including battery replacement.Tests operation of system to the customer monitoring center to properly establish service connectivity.Complete all forms accurately and customer paperwork as required.What we look for Required Massachusetts Class D electrical License3 years in low-voltage or security industry.Excellent general knowledge of major security manufacturer platforms including:Bosch/Radionics, Honeywell, Firelite, Silent Knight, DMP, DSC, etc.Valid driver's license with an excellent driving record.High school diploma or GED (General Education Development)Ability to pass thorough background and identity checks.Preferred Ability to read blueprints and schematic drawings.Ability to operate hand and power tools.Ability to unload ladder from fleet vehicle and climb ladder.Ability to always operate fleet vehicle in a safe manner.Ability to communicate and provide excellent customer serviceTerms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company..Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/careersTerms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Imagine coming to work every day with the tools and training you need to be successful and the confidence knowing you are working for the best. Voted a Top Place to Work by The Boston Globe consecutively! For over 35 years we have been committed to providing an exceptional client experience and we know that starts with our most valuable resource-our team members. Herb Chambers Honda of Burlington is currently looking for an Automotive Service Client Care Specialist to join our team! As a BDC/Client Care Specialist, you will handle inbound/outbound calls and appointment setting for our service customers. We are looking for someone comfortable with high volume calling, a “GO GETTER"" and a professional well-spoken candidate. If you have experience in customer service, telemarketing, retail, or sales then we encourage you to apply today! Previous dealership experience is a plus, but not required. Turn your talent into profit and apply today! What do we offer you Nationally recognized training and toolsMedical (HMO & PPO), vision, life & Dental401K Retirement Responsibilities: High volume of outbound and inbound phone callsCreating appointments for guests in our service departmentsLearning customers’ needs while building rapportCompleting follow-up tasks on daily activities, contact lists and campaignsDaily and Monthly performance reportingStrong phone, email, and communication skillsPositive attitude and high energy at all timesBasic MS Office knowledge; computer software and Internet proficiency

Herb Chambers Jaguar Land Rover Sudbury has an immediate opening for a Service Drive Valet to join its award-winning team! The Service Drive Valet will assist the Service and Sales Departments by guiding and directing guests and their vehicles to appropriate locations while also moving dealer inventory to designated spots and keeping a clean frontline. We have been voted by The Boston Globe as a Top Place to Work in MA consecutively! Essential Responsibilities (include but are not limited to): Greet guests entering the Service DrivePromote smooth, efficient vehicle flow in the Service Drive and dealership lotAssist with parking and the organization of guest and dealership vehiclesDirect guests to appropriate personnel as neededUtilize shuttle vehicle to transport guests to various locations as requestedAssist the Service and Sales Departments with other duties and tasks as assigned by managementKeep vehicle lot neat and orderlyParking vehicles in designated spots Benefits for full-time employees: Medical, vision and dental insurance401kwith company matchVacation, sick time, and PTOEmployee discounts on vehicle purchases, parts, and serviceOpportunities for advancement Apply today!Must be able to multi-task in a fast-paced, high-pressure environmentMust be self-motivated and have the ability to work in a team environmentExhibit a neat, clean, and professional appearancePossess excellent verbal communication skills and speak proper grammarPositive attitude and friendly demeanorHave excellent Customer Service skillsValid driver's license and clean driving recordMust have flexible scheduleMust be able to work during all weather conditionsMust be able to clean cars off during snowstorms

The licensed HVAC Tech inspects, maintains, repairs, modifies, improves, and operates central heating, ventilating, refrigeration and air conditioning systems to insure proper functioning at all times.Hours: 40 hours per week.Monday-Friday Day shift 7am-3:30pmRotating weekends, Holidays and On-call shifts requiredWork Locations: Lowell General Main & Saints CampusesGuaranteed Hours!Must be able to travel between campuses - 2 miles apartMinimum Qualifications:1. High school diploma or equivalent.2. Current HVAC/Refrigeration License.3. Three (3) years of experience as an HVAC Technician.Duties Include1. Performs installation, preventative and corrective maintenance on a variety of HVAC and refrigeration systems.2. Responds to, evaluates, and rectifies problems with HVAC equipment and systems, pneumatic and digital controls, refrigerators, freezers, ice machines, and other miscellaneous HVAC and refrigeration equipment3. Follows work orders, drawings, diagrams, other specifications and/or verbal instructions.4. Plan, install, inspect, test, and maintain/repair systems and/or equipment.5. Check completed work to ensure system/equipment is properly functioning.6. Develop and follow preventative maintenance schedule.7. Responds to repair calls, analyzes problems and makes recommendation for and/or repairs.Why Join Us Competitive salaries & benefitsMedical, Dental and Vision benefits start day one403(b) Retirement with company matchTuition ReimbursementOpportunities for career growthneed it most. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at .

Compensation Details:$30.00-$55.00 Per Hour + Monthly Bonus Opportunity For a limited time we are offering up to 10000.00 Sign On Bonus!Job Description:Hiring Experienced HVAC Service Technicians! Offering up to $10,000.00 Sign On Bonus! Who we areBoston Unique Indoor Comfort is now an Ace Hardware Company. At Ace Hardware Home Services, we are backed by a brand that customers have trusted for over 100 years. You can trust that you can build a career you will be proud of. A career with excellent income, a consistent work schedule and opportunities for advancements. Your essential contributions will be appreciated, respected, and rewarded. Here you won’t just “have a job,” you will be helping us to reshape the future of home services by providing reliable, best-in-class service to your neighbors in your community.What You’ll DoResponsible for servicing all system issues on time and to the customers satisfactionTroubleshoot and repair customer systemsPerform scheduled maintenancePerform warranty workSuggest system improvements, and modificationsWork on HVAC equipment, furnaces, gas boilers, and zone systems.What you need to succeed:Min 3 years Residential HVAC experienceHigh school diploma/GEDEPA Universal certificationDegree in Heating and Air Conditioning Technology a plusSelf-motivated to achieve annual goals and objectivesNo sales pressure environmentStrong interpersonal skillsCustomer service orientedSuperior trouble-shooting/diagnostic and repair skills for a/c systems, gas and oil furnaces, gas and oil boilers, zone systems and other HVAC equipmentClean driving recordWhy should you join our team We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don’t often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, and to the Ace brand.In addition to providing our employees a great culture, we offer competitive benefits* that address life’s necessities and perks, many of which expand and improve year after year, including:Incentive/Commission/Bonus opportunities (Based on role / grade level)401(k) retirement savings plan with matching company contributions, eligible on your first day!Comprehensive health coverage (medical, dental, vision, company paid short-term disability, and long-term disability) and life insurance benefits for you and your dependents.Warehouse Merchandise Discount!Paid time off & paid holidays (depending on role and month of hire)Career Growth & opportunities within several channels (Plumbing, Heating, Cooling, Electrical, Customer Service and others- Your career at Ace is more than just a job. It’s a chance to be part of something meaningful. We help locally-owned businesses thrive and make an impact in their communities. Ace invests in every employee we hire, with a key focus on development and coaching. We offer classes, facilitator-led courses, plus a performance management approach that goes beyond the typical annual review.Robust Employee Assistance Program, which will provide professional assistance for personal, legal, financial, work, childcare and elder care support.Compensation DetailsPay range of $30.00-$55.00 per hour + Monthly Bonus OpportunityAbout Ace Hardware Home Services Ace Hardware Home Services is the most trusted provider of home preservation services backed by Ace Hardware and offering a wide range of residential maintenance and home repair services including plumbing, heating, cooling, electrical, handyman and painting.Ace Hardware has been serving neighbors throughout America for nearly 100 years. Ace recognized the need for a trusted service provider for home repairs and launched Ace Hardware Home Services (AHHS). AHHS is now Bringing Helpful to Your Home and it is our mission to deliver the same level of Helpful service, convenience & quality that you have come to expect from Ace Hardware.Why should you join our team We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don’t often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, and to the Ace brand.In addition to providing our employees a great culture, we offer competitive benefits* that address life’s necessities and perks, many of which expand and improve year after year, including:Incentive/Commission/Bonus opportunities (Based on role / grade level)401(k) retirement savings plan with matching company contributions, eligible on your first day!Comprehensive health coverage (medical, dental, vision, company paid short-term disability, and long-term disability) and life insurance benefits for you and your dependents.Warehouse Merchandise Discount!Paid time off & paid holidays (depending on role and month of hire)Career Growth & opportunities within several channels (Plumbing, Heating, Cooling, Electrical, Customer Service and others). Your career at Ace is more than just a job. It’s a chance to be part of something meaningful. We help locally-owned businesses thrive and make an impact in their communities.Ace invests in every employee we hire, with a key focus on development and coaching. We offer classes, facilitator-led courses, plus a performance management approach that goes beyond the typical annual review.Robust Employee Assistance Program, which will provide professional assistance for personal, legal, financial, work, childcare and elder care support.* Benefits are provided in compliance with applicable policies.Want to be notified when new jobs are posted Follow the link below to create an account and set up custom job alerts:Create Job AlertAbout Ace Hardware Home ServicesAce Hardware Home Services is the most trusted provider of home preservation services backed by Ace Hardware and offering a wide range of residential maintenance and home repair services including plumbing, heating, cooling, electrical, handyman and painting.Ace Hardware has been serving neighbors throughout America for nearly 100 years. Ace recognized the need for a trusted service provider for home repairs and launched Ace Hardware Home Services (AHHS). AHHS is now Bringing Helpful to Your Home and it is our mission to deliver the same level of Helpful service, convenience & quality that you have come to expect from Ace Hardware.Equal Opportunity EmployerAce Hardware Home Services is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws.DisclaimerThe pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual’s education, training and experience, the position’s work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace Hardware Home Services position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written “Position Description” is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Home Services reserves the right to change job duties, including essential job functions, according to business necessity.

An exciting opportunity has become available for an Automotive Service Concierge at Herb Chambers BMW of Sudbury. We are looking for a positive, passionate, outgoing, professional person who possesses a strong skill in face-to-face guest interaction and also telephone and email interaction. Responsibilities will include but aren’t limited to; Checking in guestsTagging keysMaintaining cleanliness of greeting officeEscorting client to Service AdvisorOrganizing documentsSome barista tasks such as: Prepare and serve drinks and food in accordance with the Cafe standards and health code. Ideal candidate should be organized, computer proficient, friendly, flexible and a team player.- Must be available weekends - Must have a valid drivers license - Must have own transportation

Job Description SummaryAbout GE AerospaceAre you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, curiosity, and unique ideas. Most importantly, you will share in our pride and purpose that affects the lives of millions around the world!About this position:The Lynn advanced programs (AP) section is a brand-new organization with the mission of inventing the future of flight and advancing propulsion capability for the next generation of military applications. Lynn AP supports a wide range of engineering activity including design, analysis, and testing across new, derivative, and existing engines. The staff engineer will lead mechanical design and development of exhaust nozzle components as part of the exhaust nozzle team. This role is best suited for someone with a passion for engineering and a strong desire to solve new and challenging technical problems all while balancing project requirements. In this role, the staff engineer will utilize engineering experience and partner with teammates and technical experts to assess design tradeoffs, solve problems, and recommend solutions. Collaboration with teammates, technical experts, and peers in adjacent organizations will be necessary to achieve project outcomes. The staff engineer will also provide guidance and mentoring to less experienced engineers on the team. Working at our Lynn Facility:Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million square feet of manufacturing space, we’re making a huge contribution to the future of flight! The Lynn facility is the birthplace of the very first jet engine in 1942 and continues building upon this legacy with a deeply knowledgeable team building quality engines. Additionally, GE Aerospace has invested more than $100 million in facility improvements in the last five years alone. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward!Job DescriptionRoles and Responsibilities:Execute with limited guidance the design and analysis of exhaust nozzle components using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. Properly document technical data generated.Develop specialized knowledge of exhaust nozzle mechanical design and integration with the exhaust nozzle module, engine, or airframe. Stay current with the latest technical developments and internal processes.Provide technical guidance that influences outcomes in the design process leveraging experience, expertise, and data to support recommendations. Mentor others in the organization.Maintain knowledge of competition and the factors that differentiate designs or products.Develop action plans, with guidance, to respond to issues/ problemsParticipate as a presenter or reviewer in technical and program reviews with internal and external customers.Act as a resource for colleagues with less experience.Lead small to medium complexity projects optimizing exhaust nozzle component design while balancing all design, interface, and resource requirements.Required QualificationsBachelor of science in Engineering from an accredited college or universityMinimum of 6 years of engineering experience in relevant mechanical design engineering positionDue to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship.Desired Characteristics:Bachelor of Science in Mechanical or Aerospace Engineering from an accredited college or university8-10 years of experience in relevant mechanical design engineering positionActive US Government Security Clearance at the Secret levelExperience in design, analysis, and manufacturing of high-precision or turbomachinery componentsExperience in design, analysis, and manufacturing of metals and high temperature compositesProficiency with finite element analysis software such as ANSYSExtensive experience with 3D Modeling software, preferably Unigraphics/NXProficient with GD&T principles and reading or creating drawingsPassion for the aviation industry and advancing the state-of-the-artDemonstrated ability to identify problems, evaluate options, and recommend solutions considering input from stakeholders and technical experts.Ability to influence others and lead small teams or projectsStrong communication and collaboration skills in-person and across geographic sitesStrong project management skills with ability to independently organize and prioritize effort#LI-MF1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

What you will doService and troubleshoot wet/dry/ pre-action systems, fire pumps-based fire sprinkler systems, and backflows, including repair and internal inspections of systems.Servicing around 25 inspections.Follow verbal and written instructions, read and understand complex construction blueprints, diagrams, and specifications used in installation activities.Carry/move equipment and tools weighing up to 50 pounds. Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet or more.Maintain a clean and safe work area. Pick up and properly dispose of all trash associated with Johnson Controls Fire Protection work. Wear appropriate safety equipment as required including bump cap/hard hat, safety glasses, cut resistant gloves, face mask and safety toed boots.Properly secure all Johnson Controls Fire Protection tools and equipment at the end of each work period so as to prevent damage or loss.Have computer/phone skills - Word, Excel, Outlook and IPhone apps and functionsComplete and submit time reports and other documents as required.Bring to the immediate attention of the dispatcher/supervisor all changes, discrepancies and coordination problems that impair activities or schedules.Working alternate shifts or weekends to meet customer service on call requirements is required.Perform other duties as directed.What we look forRequiredHigh School Diploma, or equivalentQuality Service SkillsWorking knowledge of wet, dry and pre-action sprinkler systems, and fire pump systems a must.Must have a clean driving record.Follow verbal and written instructions5-10 years of experience in the industry.Sprinkler and Backflow license.Detail OrientedGreat communication skills to review and complete daily tasks.Customer Service Oriented.Preferred· NICET is a plus.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Herb Chambers BMW of Sudbury is currently seeking an experienced Service Advisor to join our team. The goal of this position is to efficiently and professionally assist our customers with all of their service needs. Building loyalty and trust, creating an amazing guest experience, generating profit and maintaining area-leading customer satisfaction index. Responsibilities: Greeting and assisting guests with service needsGenerating estimatesCompleting estimate review with guest in timely manner to maximize opportunitySeeing through completion of approved work and actively coveringConducting post-repair follow-upResolving customer complaints with manager assistanceCovering results, progression and training with Service Manager daily Benefits Include: Aggressive, Performance-Based Earning PotentialPaid VacationHealth & Dental Insurance401(k) with company match *Must be available weekends* *Must have valid driver’s license and own transportation*Excellent customer service skillsConfident ability to operate with little supervisionProcess driven, with great organizational skillsThe desire to be successful in a fun, fast-paced, high-volume highly motivational environment

Job Description SummaryAbout GE AerospaceAre you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, curiosity, and unique ideas. Most importantly, you will share in our pride and purpose that affects the lives of millions around the world!About this positionThe Lynn advanced programs (AP) section is a brand-new organization with the mission of inventing the future of flight and advancing propulsion capability for the next generation of military applications. Lynn AP supports a wide range of engineering activity including design, analysis, and testing across new, derivative, and existing engines. The lead fan rotor mechanical design engineer will be the fan rotor hardware owner, responsible for execution of mechanical design and development of the fan rotor as part of the fan module team. In this role, the lead engineer will utilize engineering experience to solve problems and recommend technical solutions partnering with teammates and technical experts. This role is best suited for a collaborative problem solver with a desire to deepen their mechanical design expertise and develop new solutions to challenging technical problems. Effectively working with teammates and peers in adjacent organizations will be necessary for successful project execution to impact short-term and long-term business goals.Working at our Lynn FacilityCome and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million square feet of manufacturing space, we’re making a huge contribution to the future of flight! The Lynn facility is the birthplace of the very first jet engine in 1942 and continues building upon this legacy with a deeply knowledgeable team building quality engines. Additionally, GE Aerospace has invested more than $100 million in facility improvements in the last five years alone. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward!Job DescriptionRoles and Responsibilities:Execute the design and analysis of the fan rotor by applying engineering principles and adhering to business standards, practices, procedures, and product/program requirements with guidance from experienced teammates and technical experts. Properly document technical data generated.Develop specialized knowledge in fan rotor mechanical design and fan rotor integration into the fan module/engine. Stay current with the latest technical developments and internal processes.Provide timely communication if significant issues or challenges arise. Collaborate with people leader and/or teammates to develop action plans to resolve challengesPrepare and present technical data along with recommendations or conclusions to internal and external customer audiencesGain an understanding of competitors and the factors that differentiate designs or productsLead small projects within the fan module balancing some risk and resource requirementsRequired Qualifications:Bachelor of Science in Engineering from an accredited college or university.Minimum of 3 years of experience in relevant mechanical design engineering position.Due to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship.Desired Characteristics:Bachelor of Science in Mechanical or Aerospace Engineering from an accredited college or university4-5 years of experience in relevant mechanical design engineering position.Active US Government Security Clearance at the Secret levelExperience with finite element analysis software such as ANSYSKnowledge of 3D Modeling software, preferably Unigraphics/NXUnderstanding of GD&T principles and reading or creating drawingsExperience in design, analysis, and manufacturing of high-precision or turbomachinery componentsPassion for the aviation industry and advancing the state-of-the-artAbility to identify problems, evaluate options, and recommend solutions considering input from stakeholders and technical expertsStrong project management skills with ability to independently organize and prioritize effortsStrong communication and collaboration skills in-person and across geographic sites#LI-MF1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingTuition reimbursementGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doService Technicians diagnose problems and perform service and repairs on card access, CCTV, burglar alarm systems,electronic fire alarm systems and other related building system products at customer sites.How you will do itFollow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment.Service, troubleshoot, and installcard access, CCTV, and burglar alarm systems.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals.Exhibit effective customer service skills by consistently communicating with staff and customers to ensure customer satisfaction.Complete Service Acknowledgements with proper coding through communication devices such as smart phones and laptop computers.Obtain customer signature upon completed service call assignment.Available for on-call emergency service.Perform other duties as assigned.What we look forRequiredMassachusetts Class D Electrical License2-year degree or equivalent combination of education and experience.4 years documented experience with card access and CCTV.Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.Experience installing, inspecting, repairing, and programming card access and CCTV.Fire alarm experience is a plus.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Retain any licenses that are required by National, State and Local codes.Knowledge of applicable NFPA standards.Preferred:NICET III preferred in the subfield of Special Hazard Systems or Level III in subfield of Fire Alarm.Johnson Controls International plc. is an equal employment opportunity and affirmative actionemployer,and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please viewEEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visitwww.johnsoncontrols.com/careers.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description SummaryAbout GE AerospaceAre you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, curiosity, and unique ideas. Most importantly, you will share in our pride and purpose that affects the lives of millions around the world! About the PositionThe Lynn Advanced Programs (AP) section is a brand-new organization with the mission of inventing the future of flight and advancing propulsion capability for the next generation of military applications. Lynn AP supports a wide range of engineering activity including design, analysis, and testing across new, derivative, and existing engines. The staff engineer will lead mechanical design and development of the fan rotor as part of the fan module team. This role is best suited for someone with a passion for engineering and a strong desire to solve new and challenging technical problems all while balancing project requirements. Collaboration with teammates and peers in adjacent organizations will be necessary to achieve project outcomes. The staff engineer will also provide guidance and mentoring to less experience engineers on the team.Working at our Lynn Facility:Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million square feet of manufacturing space, we’re making a huge contribution to the future of flight! The Lynn facility is the birthplace of the very first jet engine in 1942 and continues building upon this legacy with a deeply knowledgeable team building quality engines. Additionally, GE Aerospace has invested more than $100 million in facility improvements in the last five years alone. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward!Job DescriptionRoles and Responsibilities:Execute with limited guidance the design and analysis of the fan rotor using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. Properly document technical data generated.Develop specialized knowledge in fan rotor mechanical design and fan rotor integration into the fan module/engine. Stay current with the latest technical developments and internal processes.Provide technical guidance that influences outcomes in the design process leveraging experience, expertise, and data to support recommendations. Mentor others in the organizationMaintain working knowledge of competition and the factors that differentiate designs or productsDevelop action plans, with guidance, to respond to issues/ problemsParticipate as a presenter or reviewer in technical and program reviews with internal and external customersAct as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements.Required Qualifications:Bachelor of Science in Engineering from an accredited college or universityMinimum of 5 years of experience in relevant mechanical design engineering positionDue to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenshipDesired Characteristics:Bachelor of Science in Mechanical or Aerospace Engineering from an accredited college or university6-8 years of experience in relevant mechanical design engineering positionActive US government security clearance at the Secret levelExperience in design, analysis, and manufacturing of high-precision or turbomachinery componentsProficiency with finite element analysis software such as ANSYSExtensive experience with 3D Modeling software, preferably Unigraphics/NXProficient with GD&T principles and reading drawingsPassion for the aviation industry and advancing the state-of-the-artStrong communication and collaboration skills in-person and across geographic sitesAbility to influence others and lead small teamsDemonstrated ability to identify, analyze, and resolve problemsStrong project management skills with ability to independently organize and prioritize effort#LI-MF1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAbout GE AerospaceAre you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, curiosity, and unique ideas. Most importantly, you will share in our pride and purpose that affects the lives of millions around the world!About the PositionThe Lynn advanced programs (AP) section is a brand-new organization with the mission of inventing the future of flight and advancing propulsion capability for the next generation of military applications. Lynn AP supports a wide range of engineering activity including design, analysis, and testing across new, derivative, and existing engines. The advanced staff engineer will lead overall design and development of an exhaust nozzle as part of the exhaust module team. As the exhaust nozzle lead, the advanced staff engineer will balance individual execution of key design activities while also providing guidance and mentoring to less experienced engineers. Together, the exhaust nozzle team will execute all necessary design activities including mechanical design, analysis, manufacturing support, and testing. This role is best suited for an experienced engineer with a passion for solving new and complex design problems that require a collaborative approach across multiple engineering disciplines. Working effectively and efficiently in person and across geographic sites with teammates and adjacent organizations will be necessary to achieve project outcomes. Working at our Lynn Facility:Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million square feet of manufacturing space, we’re making a huge contribution to the future of flight! The Lynn facility is the birthplace of the very first jet engine in 1942 and continues building upon this legacy with a deeply knowledgeable team building quality engines. Additionally, GE Aerospace has invested more than $100 million in facility improvements in the last five years alone. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward!Job DescriptionRoles and Responsibilities:Lead the design and analysis of the exhaust nozzle using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. Ensure all technical data generated by self and exhaust nozzle team members is properly documented.Provide technical guidance and influence outcomes balancing input from cross functional teams and design requirements. Assess quality of available information and ask pertinent questions to stakeholders.Demonstrate critical thinking and judgment to make decisions and handle complex tasks or problems in engineering, project management, or manufacturing. Recommend new or creative solutions to challenges.Develop specialized knowledge in exhaust nozzle mechanical design and integration with adjacent engine or airframe hardware.Assess internal and external business challenges associated with exhaust nozzles and recommend best practices to improve. Stay informed of industry trends and understand the impact on short or long term project goals.Provide technical guidance that influences outcomes in the design process leveraging experience, expertise, and data to support recommendations. Mentor others in the organizationDevelop action plans to respond to issues/ problemsParticipate as a presenter or reviewer in technical and program reviews with internal and external customers. Act a peer reviewer of presentations to less experienced teammates and provide feedback prior to internal or external reviews.Required QualificationsBachelor of science in Engineering from an accredited college or universityMinimum 7 years of engineering experience in relevant mechanical design engineering positionDue to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship.Desired Characteristics:Bachelor or Master of science in Mechanical or Aerospace engineering5+ years experience in mechanical design of hot structuresActive US government security clearance at the Secret levelExperience in design, analysis, and manufacturing of high-precision or turbomachinery componentsExperience in design, analysis, and manufacturing of metals and high temperature compositesProficiency with finite element analysis software such as ANSYSExtensive experience with 3D Modeling software, preferably Unigraphics/NXProficient with GD&T principles and reading drawingsPassion for the aviation industry and advancing the state-of-the-artStrong communication and collaboration skills in-person and across geographic sitesAbility to influence others and lead small teamsDemonstrated ability to identify, analyze, and resolve problems as part of a cross functional team in a matrix organizationStrong project management skills with ability to independently organize and prioritize effort for self and team members#LI-MF1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAbout GE Aerospace:Are you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, curiosity, and unique ideas. Most importantly, you will share in our pride and purpose that affects the lives of millions around the world!About this position:The Lynn Advanced Programs (AP) section is a brand-new organization with the mission of inventing the future of flight and advancing propulsion capability for the next generation of military applications. Lynn AP supports a wide range of engineering activity including design, analysis, and testing across new, derivative, and existing engines. The lead engineer for exhaust nozzle mechanical design will be the hardware owner responsible for all aspects of design and development of assigned exhaust nozzle components as a part of the exhaust nozzle team. In this role, the lead engineer will utilize engineering experience and partner with teammates and technical experts to solve problems and recommend solutions. This role is best suited for a collaborative problem solver with a desire to deepen their mechanical design expertise and develop new solutions to challenging technical problems while balancing program requirements. Effectively working with teammates, technical experts, and peers in adjacent organizations will be necessary for successful project execution to impact short-term and long-term business goals. Working at our Lynn Facility:Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million square feet of manufacturing space, we’re making a huge contribution to the future of flight! The Lynn facility is the birthplace of the very first jet engine in 1942 and continues building upon this legacy with a deeply knowledgeable team building quality engines. Additionally, GE Aerospace has invested more than $100 million in facility improvements in the last five years alone. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward!Job DescriptionRoles and Responsibilities:Execute exhaust nozzle component design and analysis by applying engineering principles and adhering to business standards, practices, procedures, and product / program requirements with guidance from experienced teammates and technical experts. Properly document technical data generated.Develop specialized knowledge in exhaust nozzle mechanical design and interface design with adjacent hardware within the exhaust nozzle module. Stay current with the latest technical developments and internal processes.Provide timely communication if significant issues or challenges arise. Collaborate with people leader, teammates, and technical experts to develop action plans to resolve challenges.Prepare and present technical data along with recommendations or conclusions to internal and external customer audiences.Gain an understanding of competitors and the factors that differentiate designs or products.Lead small projects optimizing exhaust nozzle component design while balancing all design, interface, and resource requirements.Required Qualifications:Bachelor of Science in Engineering from an accredited college or university.Minimum of 3 years of experience in relevant mechanical design engineering position.Due to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship.Desired Characteristics:Bachelor of Science in Mechanical or Aerospace Engineering from an accredited college or university4-5 years of experience in relevant mechanical design engineering positionActive US Government Security Clearance at the Secret levelExperience with finite element analysis software such as ANSYSKnowledge of 3D Modeling software, preferably Unigraphics/NXUnderstanding of GD&T principles and reading or creating drawingsExperience in design, analysis, and manufacturing of high-precision or turbomachinery componentsExperience in design, analysis, and manufacturing of metals and high temperature compositesPassion for the aviation industry and advancing the state-of-the-artAbility to identify problems, evaluate options, and recommend solutions considering input from stakeholders and technical expertsStrong project management skills with ability to independently organize and prioritize effortsStrong communication and collaboration skills in-person and across geographic sites#LI-MF1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes