Interior Installerin GAC WestfieldInterior Installation Technician IIUnique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222701Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/15/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Job Description:Position Details:$26.00 per hour up to $35.00 per hour depending upon experience$2500 Sign On Bonus (Terms Apply) and $1000 Annual Tool Allowance4 Day Work Week! (Wed 11:30am – 5:30am / Thurs – Sat 11:30pm – 5:30am)We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class B keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class B performs preventative maintenance of medium to heavy-duty trucks, trailers, reefer units, and convertor dollies under minimal supervision. Responsibilities may include, but not limited to:Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and performs repairs as required.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:• High School Diploma/GED or State Approved Equivalent • 3 - 5 years experience of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and experience in refrigeration.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.JOB SUMMARYWorking under close supervision, performs a variety of simple to routine assignments by following detailed work instruction that requires limited judgment and decision-making to complete.ESSENTIAL DUTIES AND RESPONSIBILITIES· Perform scheduled preventive maintenance.· Performs feeder maintenance, repair and data tracking.· Train employees in operation and maintenance of machinery.· May train and coordinate activities of MA.May provide assistance in the following areas:· Troubleshoot to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process.· Dismantle, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manual, rough sketches or drawings.· Uses test and diagnostic equipment to perform checkouts.· May be required to work overtime.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Able to acquire job skills and learn company policies and procedures to complete routine tasks.· Must be able to read, write and communicate in English.· Use of basic and special purpose hand tools and leveling instruments. Knowledge of torque specifications.· Basic mathematics.· Understanding of electronic color codes and other component value markings.· Understanding of safety practices requirements.· Personal computer operation in a Windows environment (Excel, Word and PowerPoint and e-mail).· Use of specialized maintenance tracking programs.EDUCATION & EXPERIENCE REQUIREMENTS· Associates degree in electronics with emphasis in servo positioning theory or equivalent discipline.· Prior experience as MA may be substituted.· Zero to two (2) years work-related experience required, preferably in electro-mechanical equipment in a manufacturing environment.· Or an equivalent combination of education, training or experience.BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.#whereyoubelong#AWorldofPossibilities#EarlyCareer

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Come work at the best place to give and receive care! Job Description:Who We Are:Healthcare facilities management and maintenance has the same purpose asany other maintenance department: to ensure optimal asset reliability and performance. We do this at The Elliot by proactively maintaining assets and infrastructures while also maintaining a respectable upkeep of the property.About the Job:Supports the Facilities Management department by maintaining and operating all mechanical equipment, systems, and spaces throughout the facility.What You’ll Do:Makes periodic checks of unmanned machinery spaces to check the operation of designated machinery.Acts appropriate to maintain or restore system/equipment to satisfactory operating condition.Starts and operates boilers, chillers, blowers, pumps, compressors, generators, cooling towers and other machinery to maintain plant operations.Observes system operations and ensures they are in accordance with established operating procedures and guidelines and switches boiler fuels, aligns fuel tanks and changes compressed gas bottles.Performs routine preventive maintenance and/or inspection tasks.Responds to various system alarms including, but not limited to, refrigeration, oxygen/piped gas, heating/cooling, boilers, and generators and acknowledges alarms, resets or takes appropriate corrective actions.Initiates “First Response” actions during emergency/contingency situations in accordance with established department policies, instructions, standing orders, disaster preparedness manual, hospital fire plan, code 2 protocol and established contingency plans.Maintains boiler room and machine room logs including, but not limited to, steam, fuel and water consumption data, feed water and flue gas test results, medical gas system parameters, tank levels, fuel and medical gas deliveries and HVAC system parameters.Monitors the activities of after-hour maintenance personnel, contractors, or vendor personnel.Who You Are: Education: High school diploma or equivalent required. Post-secondary school or vocational training preferred. Courses in plumbing, electrical, carpentry, welding, Sheet metal, automotive repair, ventilation, and clinical engineering preferred.Experience:A minimum of two-four (2-4) years of experience in plant operations and/or building maintenance required. Prior experience in a healthcare environment preferred.Certification/Licensure:Valid driver's license is required and must be maintained throughout the duration of appointment in position.Schedule: Generally, Monday through Friday.Why You’ll Love Us:Health, dental, prescription, and vision coverage for full-time & part-time employeesShort-term disability, long-term disability, and life insurance coverageCompetitive payTuition Reimbursement403(b) Retirement Savings PlanAnd more!#DMORequired Certifications:DRIVER'S LICENSE - ExternalRequired Education: Work Shift:Varies | Per DiemSolutionHealth is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, disability status, veteran status, or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns.Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for:High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Valid driver’s license and a safe driving record are required. Knowledgeable in maintenance equipment.Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment test to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Bindery Assistant – 1st Shift Sheridan. Be part of something greater. Your career awaitsjoin us! As one of the leading print and publishing service providers in the nation, Sheridan prints everything from popular magazines and catalogs, to prestigious medical and scientific journals, and so much more. A career at Sheridan is so much more than just a job. We work hard, we have fun, and we are proud of what we do. Job Summary: The Bindery Assistant is responsible to support operators with efficient machine operation by managing the flow of materials onto and off binding lines and by supporting the mailing process and assist in all hand-related operations which pertain to the Finishing Department. Basic Qualifications: A minimum of a High School diploma or GED/HiSET required.Basic verbal and written communication skills.Ability to perform work productively and safely.Reliable; good attendance is required.Required to work mandatory overtime as needed.Must possess ability to work at a rapid pace.Ability to lift, carry, push, and pull up to a maximum of 50 lbs. frequently.Continuous standing, frequent walking & stooping, occasional sitting, crouching, and reaching/working overhead required.Good visual acuity and manual dexterity required.Must wear hearing protection and safety shoes. Schedule is Monday to Friday, 7 AM – 3 PM – 40 hours/week Overtime pays time and a half after 40 hours per week What’s in It for You On-the-job training programs through Sheridan Academy.Career advancement with an employer who supports your development.Tuition reimbursement for approved coursework.A best-workplace culture that fosters life-long friendships and encourages fun.A successful and growing industry-leading company.An employee referral program that pays you money.A variety of shift and schedule options.Paid vacation & holidays.Competitive compensation.Medical (PPO and HSA Plans), Dental, Vision.Teladoc – convenient no- or low-cost medical services.Confidential and free EAP program for wellness and mental health.Company-paid basic life, AD&D, and short-term disability insurance.401(k) retirement plan with company match.A safe, values-based company that acts with integrity and respect for all. To apply, visit https://www.sheridan.com/careers/ CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or.

Job Description:Position Details:$30.00 per hour and up depending upon experienceSunday - Wednesday 2nd shift hours$5000 Sign On Bonus (Terms Apply), as well as Quarterly Safety IncentivesWe Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class A keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class A diagnoses and repairs medium to heavy-duty trucks, trailers, reefer units, convertor dollies and maintenance vehicles under minimal supervision. Responsibilities may include, but not limited to:Completes overhauls and rebuilds of heavy-duty diesel engines and transmission.Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and perform repairs as required.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditions.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:• High School Diploma/GED or State Approved Equivalent• 5 - 7 years experience of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair• Minimum of 2 years’ experience in refrigeration &/or overhauls and rebuilds of heavy-duty diesel engines and transmissions.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Aircraft Painterin GAC WestfieldUnique Skills:Prior aircraft or automative painting experience is preferred.Education and Experience RequirementsHigh School Diploma or GED required. 2 years in related paint processes. Aircraft industry experience preferred.. Valid Drivers License required.. Position Purpose:The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist with aircraft movement in hangars. Offer continuous improvement ideas/participate in continuous improvement activities.Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with the aircraft painting process. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223394Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/08/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.JOB SUMMARY Provides required service, repair and “return-to-operation” molds that are actively engaged in producing quality products. ESSENTIAL DUTIES AND RESPONSIBILITIES · Maintains customer satisfaction by maintaining the maintenance of molds and ancillary equipment used in producing product. · Ensures the quality fabrication and maintenance of injection molds, dies jigs, fixtures and other devices used in furthering production of the customers’ parts. · Performs preventive maintenance on molds and on mold performance tracking the maintenance with accurate and timely documentation. · Provides process improvement recommendations and forecasts any potential quality or production issues from tooling lead. · Runs all manual shop equipment as required. · Troubleshoots and analyzes problems before any repairs are initiated. · Supports production by repairing, adjusting and maintaining all forms of equipment used in the production process. · Supplies direct action in modifying molds to produce a superior quality product. · Maintains stock inventories by ensuring the proper levels of component parts are available at all times for tooling repair. · Improves the efficiency and accuracy of molded products by the documenting reasons for mold repairs and solutions to prevent future manufacturing interruptions. · May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS · Industry and Plastics Mold Knowledge · Problem Solving/Trouble Shooting · Detail Oriented · Master Craftsmen Ability · Responsiveness · Team Participation Skills · Training/Mentoring Skills · Ability to Operate All Manual Mold Shop Equipment and MachinesBE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.#whereyoubelong#AWorldofPossibilities#EarlyCareer

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Our Team is Kind of a Big Deal!UniFirst is seeking areliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime!We have an immediate opening and provide on the job training. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs.Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment.Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for: High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Knowledgeable in industrial maintenance of facilities and equipment.Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Valid driver’s license and a safe driving record are required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Bindery Assistant – Part-Time 1st or 2nd Shift Sheridan. Be part of something greater. Your career awaitsjoin us! As one of the leading print and publishing service providers in the nation, Sheridan prints everything from popular magazines and catalogs, to prestigious medical and scientific journals, and so much more. A career at Sheridan is so much more than just a job. We work hard, we have fun, and we are proud of what we do. Job Summary: The Bindery Assistant is responsible to support operators with efficient machine operation by managing the flow of materials onto and off binding lines and by supporting the mailing process and assist in all hand-related operations which pertain to the Finishing Department. Basic Qualifications: A minimum of a High School diploma or GED/HiSET required.Basic verbal and written communication skills.Ability to perform work productively and safely.Reliable; good attendance is required.Required to work mandatory overtime as needed.Must possess ability to work at a rapid pace.Ability to lift, carry, push, and pull up to a maximum of 50 lbs. frequently.Continuous standing, frequent walking & stooping, occasional sitting, crouching, and reaching/working overhead required.Good visual acuity and manual dexterity required.Must wear hearing protection and safety shoes. Schedule is flexible. Hours are between 7 AM to 3 PM or 3PM to 11 PM. You pick the number of days and which days (Monday - Friday)! –8 to 24hours/week What’s in It for You On-the-job training programs through Sheridan Academy.Career advancement with an employer who supports your development.A best-workplace culture that fosters life-long friendships and encourages fun.A successful and growing industry-leading company.An employee referral program that pays you money.A variety of shift and schedule options.Competitive compensation.A safe, values-based company that acts with integrity and respect for all. To apply, visit https://www.sheridan.com/careers/ CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or.

Aviation Safety Inspectorin GAC WestfieldAirworthiness Inspector A&P.$3,000 Signing Bonus.Unique Skills:2nd shift position (Tuesday - Friday)Gulfstream large cabin experience preferred.Flight Safety Initial course completion preferred.Must be able to occasionally work in confined spaces.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223331Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Job Description:Position Details: $20.00 per hour, up to $25.00 per hour based off experienceMonday - Friday 10am-6pmWe Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more.Growth opportunities performing essential work to support America’s food distribution system.Safe and inclusive working environment, including culture of rewards, recognition, and respect.Position Summary:Assist in troubleshooting, maintaining, repairing, replacing, adjusting and modifying company vehicles, vans, pick-up trucks, tractors, trailers and various types of refrigeration, air conditioning and temperature control equipment, including structural metal repair and painting of tractors and trailers, as well as performing road service and preventative maintenance duties following standard accepted methods, practices and procedures in emergency and non-emergency situations and ensuring all safety and quality standards are met. Communicates and interacts with co-workers professionally ensuring questions are answered accurately and in a timely manner. Functions as a team member within the department and organization, as required, and perform any duty assigned to best serve the company.Position Responsibilities:Review work schedule, perform safety check on equipment, obtain supplies required to perform the work and prepare for operations. Work from preventative maintenance schedules, various checklists, manuals, diagrams, specifications, vehicle file and instructions.Assist in performing regular scheduled tractor inspections, complete checklists, troubleshoot and make routine repairs as required. Perform major repair work to tractors and trailers, disassemble, remove, repair or replace defective parts or components of gas or diesel engines, transmissions, steering mechanisms, ignition, electrical and hydraulic systems, air conditioning, refrigeration controls and units, clutches, brakes and mechanical or electrical operating units.Assist in servicing and repairing refrigeration units, repair engines, repair leaks, replace tubing, condensers, thermal controls, and recharge units with approved refrigerant gas.Operate electric arc welding equipment to repair ramps, ladders and tripods, repair or construct new cargo bars.Assist on road service trips, maintain required logs, records, checklists and reports, maintain garage tools, equipment and work area in a clean and orderly manner.Perform other similar or related operations as assigned or directed. At end of shift, secure all equipment, perform general housekeeping duties and complete all required paperwork.Performs other related duties as assigned.Qualification:• High school diploma/GED or state approved equivalent• 6-12 months’ experience• Interpret data requiring advanced skills knowledge equivalent to 6-12 months training in truck/automotive maintenance• Wide variety of drawings, specifications, charts, tables, various types of meters and diagnostic equipment.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Bindery Assistant – 1st Shift Sheridan. Be part of something greater. Your career awaitsjoin us! As one of the leading print and publishing service providers in the nation, Sheridan prints everything from popular magazines and catalogs, to prestigious medical and scientific journals, and so much more. A career at Sheridan is so much more than just a job. We work hard, we have fun, and we are proud of what we do. Job Summary: The Bindery Assistant is responsible to support operators with efficient machine operation by managing the flow of materials onto and off binding lines and by supporting the mailing process and assist in all hand-related operations which pertain to the Finishing Department. Basic Qualifications: A minimum of a High School diploma or GED/HiSET required.Basic verbal and written communication skills.Ability to perform work productively and safely.Reliable; good attendance is required.Required to work mandatory overtime as needed.Must possess ability to work at a rapid pace.Ability to lift, carry, push, and pull up to a maximum of 50 lbs. frequently.Continuous standing, frequent walking & stooping, occasional sitting, crouching, and reaching/working overhead required.Good visual acuity and manual dexterity required.Must wear hearing protection and safety shoes. Schedule is Monday to Friday, 7 AM – 3 PM – 40 hours/week Overtime pays time and a half after 40 hours per week What’s in It for You On-the-job training programs through Sheridan Academy.Career advancement with an employer who supports your development.Tuition reimbursement for approved coursework.A best-workplace culture that fosters life-long friendships and encourages fun.A successful and growing industry-leading company.An employee referral program that pays you money.A variety of shift and schedule options.Paid vacation & holidays.Competitive compensation.Medical (PPO and HSA Plans), Dental, Vision.Teladoc – convenient no- or low-cost medical services.Confidential and free EAP program for wellness and mental health.Company-paid basic life, AD&D, and short-term disability insurance.401(k) retirement plan with company match.A safe, values-based company that acts with integrity and respect for all. To apply, visit https://www.sheridan.com/careers/ CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or. #SNH24

Structural Mechanicin GAC WestfieldSheet Metal Mechanic II / Sheet Metal Technician II$4,500 Signing Bonus.Unique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Position Purpose:In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required. Able to work with minimal supervision on duties and tasks . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Properly use and maintain company-provided tools and equipment and returns items to tool room after use . Ensure standard operating procedures are followed when operating ground support equipment .Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . Assist in maintaining shop equipment and associated JSAs . Support Lean Activities .Perform other duties as assigned.Other Requirements: Must be able to read and interpret blue prints. Basic computer skills and basic shop math skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223065Category: OperationsPercentage of Travel: Up to 50%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Maintenance Technician2– 3rd Shift Sheridan. Be part of something greater. Your career awaitsjoin us! As one of the leading print and publishing service providers in the nation, Sheridan prints everything from popular magazines and catalogs, to prestigious medical and scientific journals, and so much more. A career at Sheridan is so much more than just a job. We work hard, we have fun, and we are proud of what we do. Job Summary: The Industrial Maintenance Technician 2 will complete all designated or assigned maintenance or repair of production equipment and building systems of a moderate to high degree of complexity, on an independent basis and be proficient in at least one building trade or function. Basic Qualifications: A minimum of a High School diploma or GED/HiSETrequired. Minimum of 3 years of experience in a similar position required. Basic understanding of the fundamentals of electricity. Able to diagnose and make complex repairs on equipment. General knowledge of all building trades. Basic understanding of pneumatics. Basic understanding of hydraulics. Basic verbal and written communication skills. Basic computer skills. Good interpersonal skills required/team player. Ability to perform work productively and safely. Reliable; good attendance is required. Required to work mandatory overtime or be on emergency call as needed. Ability to lift, carry, push, and pull up to a maximum of 50 lbs. frequently. Frequent standing, walking, handling, and reaching/working overhead required. Occasional climbing, stooping, kneeling, sitting, crouching, and crawling required. Good visual acuity and manual dexterity required. Must wear hearing protection, eye protection, and safety shoes. Schedule is Monday – Saturday, 11:00 PM to 7:00 AM – 40 hours/week Overtime pays time and a half after 40 hours per week 3rd Shift pays an extra shift incentive on hours worked! Eligible for $1,000 hiring bonus after 12 weeks! What’s in it for YOU On-the-job training programs through Sheridan Academy. Career advancement with an employer who supports your development. Tuition reimbursement for approved coursework. A best-workplace culture that fosters life-long friendships and encourages fun. A successful and growing industry-leading company. An employee referral program that pays you money. A variety of shift and schedule options. Paid vacation & holidays. Competitive compensation. Medical (PPO and HSA Plans), Dental, Vision. Teladoc – convenient no- or low-cost medical services Confidential and free EAP program for wellness and mental health. Company-paid basic life, AD&D, and short-term disability insurance. 401(k) retirement plan with company match. A safe, values-based company that acts with integrity and respect for all. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Senior Avionics Technicianin GAC Westfield$6,500 Signing Bonus. Eligible for Relocation Assistance.Hiring for All Shifts.Unique Skills:Avionics Technicians / Avionics Electrical Techs.See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222283Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Bindery Assistant – 2nd Shift Sheridan. Be part of something greater. Your career awaitsjoin us! As one of the leading print and publishing service providers in the nation, Sheridan prints everything from popular magazines and catalogs, to prestigious medical and scientific journals, and so much more. A career at Sheridan is so much more than just a job. We work hard, we have fun, and we are proud of what we do. Job Summary: The Bindery Assistant is responsible to support operators with efficient machine operation by managing the flow of materials onto and off binding lines and by supporting the mailing process and assist in all hand-related operations which pertain to the Finishing Department. Basic Qualifications: A minimum of a High School diploma or GED/HiSET required.Basic verbal and written communication skills.Ability to perform work productively and safely.Reliable; good attendance is required.Required to work mandatory overtime as needed.Must possess ability to work at a rapid pace.Ability to lift, carry, push, and pull up to a maximum of 50 lbs. frequently.Continuous standing, frequent walking & stooping, occasional sitting, crouching, and reaching/working overhead required.Good visual acuity and manual dexterity required.Must wear hearing protection and safety shoes. Schedule is Monday to Friday, 3 PM – 11 PM – 40 hours/week Overtime pays time and a half after 40 hours per week2nd shift pays a shift incentive on hours worked! What’s in It for You On-the-job training programs through Sheridan Academy.Career advancement with an employer who supports your development.Tuition reimbursement for approved coursework.A best-workplace culture that fosters life-long friendships and encourages fun.A successful and growing industry-leading company.An employee referral program that pays you money.A variety of shift and schedule options.Paid vacation & holidays.Competitive compensation.Medical (PPO and HSA Plans), Dental, Vision.Teladoc – convenient no- or low-cost medical services.Confidential and free EAP program for wellness and mental health.Company-paid basic life, AD&D, and short-term disability insurance.401(k) retirement plan with company match.A safe, values-based company that acts with integrity and respect for all. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or.

Senior Aircraft Mechanicin GAC WestfieldA&P Aircraft Mechanic / Aircraft Technician.$6,500 Signing Bonus. Eligible for Relocation Assistance. Hiring for All Shifts.Unique Skills:See job description for details.Prior corporate aircraft experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222282Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Aircraft Technician IIin GAC WestfieldA&P Aircraft Mechanic / Aircraft Technician.$6,500 Signing Bonus. Hiring for All Shifts.Unique Skills:Please see job description.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222279Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Avionics Technician IIin GAC WestfieldHiring for All Shifts. $6,500 Signing Bonus.Unique Skills:Avionics Technicians / Avionics Electrical Techs.See job description for detailsEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222280Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Avionics Technician Iin GAC WestfieldHiring for All Shifts.Unique Skills:See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams. . Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Additional InformationRequisition Number: 222278Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Lead Avionics Technicianin GAC WestfieldUnique Skills:Day Shift Position.See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience on large/mid-size aircraft. 8 years experience in aircraft avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and six (6) years related experience. FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. FCC license or NCATT certification preferred. Position Purpose:Plans and coordinates all electrical/avionics activities and provides customers with daily information on aircraft schedules, repairs, parts, components shipped to vendors, etc. Works with hangar management to coordinate electrical/avionics activities and schedule aircraft requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plans, schedules, and completes tasks on work authorizations in order to meet the master schedule. Provides daily status reports and progress schedules to management. . Coordinates efforts of Electrical and Avionics activities to meet aircraft schedules and deadlines. Reviews work, including forms and records, to ensure compliance with Site Inspection Procedures Manual, Site Operating Procedures and FARs. . Supervises and instructs electrical technicians with technical guidance and proper procedures of troubleshooting electrical/avionics systems, routine inspections and preventive maintenance. Provides input to subordinate performance appraisals and submits them to management for review. . Reviews daily job charging for all personnel (including support groups) to ensure accuracy of inputs. . Maintains a preventive maintenance program on test equipment, hand tools, and special tools. Maintains a current knowledge of Aircraft Service Changes (ASC), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Supervises a continuous safety program in hangar area which includes operation of support equipment, aircraft systems and general housekeeping. Maintains required. logs and records. Enforces the company FOD, tool control, 5-S programs and all safety regulations. . Able to adapt to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Establishes and fosters an environment of innovation and Lean oriented thinking. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must have thorough knowledge of aircraft systems, troubleshooting, technical manuals systems, and aircraft maintenance records system. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret electrical/avionics system drawings and blueprints. Must have demonstrated leadership ability. Excellent communication skills, both verbal and written. Demonstrated ability to plan, organize, implement and obtain objective with minimal direction. A good understanding of PC, Windows and main frame computer applications including the use of standard computer word processing programs (i.e. Microsoft Word) and appropriate typing skills a plus. Must be able to climb ladders and stairs, work in small-space restricted area, and lift up to 100 pounds. Ability to use hand tools and avionics test equipment. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223618Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Aircraft Technician Iin GAC WestfieldUnique Skills:Upcoming A&P graduates will be considered.See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate or 2 years of aviation maintenance experience. . Valid Driver’s License required. Position Purpose:The Aircraft Technician I, under close supervision, performs or assists with inspection, maintenance, and repair of basic aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform basic aircraft inspections, repairs, and modifications under close supervision. Assist with movement of aircraft as required. Properly complete CMP cards, work order sign-offs, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic power units, hydraulic lift platforms, forklifts, compressed gas cylinders, etc.) . Ensure all customer property is properly protected.Additional Functions: Use material tracking system to create parts demand, and to charge labor to Work Orders, items, and squawks. . Properly collect and dispose of waste fuel, oil, hydraulic and de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address and report unsafe conditions before putting people or property at risk. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222276Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Mechanical Team Leadin GAC WestfieldUnique Skills:Weekend shift position.See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223619Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1