North Salem, NH 03073 • (9.4 miles) • Full Time • 10/18/2026

Position Summary The CNC Machinist III produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. May be required to perform some programming. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate, set up, and could program CNC mills, Wire EDM's, and CNC lathes within specified tolerances following work instructions and in accordance with machine programs and engineering drawings Propose new production Set ups and change offsets/tooling in machines as part of the new set

Boston, MA 02298 • (42.5 miles) • Full Time • 11/1/2026

This role is eligible for a $8,500 sign on bonus (not eligible for internal candidates and not eligible for former BCH employees who worked here in the past 12 months). Schedule: 6:45am-3:15pm, Monday through Friday. On-call weekends and holidays as needed Position Summary/ Department Summary: Under general supervision of the SPD Management, the Sterile Processing Endoscopy Supervisor is responsible for overseeing the team and daily workflow operations of the Endoscopy Technicians in the operating room and the GPU Department. Administers the high-level disinfection process according to AORN, AAMI and SGNA standards. Sterile Processing Endoscopy Supervisor oversees the coordination, maintenance, and storage of medical instruments, supplies, and equipment to support adequate inventory levels

Boston, MA 02298 • (42.5 miles) • Full Time • $135,000 to $160,000 / yr • 10/30/2026

Position Overview: The Director of QA & Compliance leads and manages the global end-to-end quality assurance, product integrity, and regulatory compliance programs across all product lines at Duluth Trading Company. This role ensures that every Duluth product meets the company’s quality promise on our high-quality and ingenious gear, which is to last with unmatched durability, and complies with US state and federal regulations. Position Details: Work Environment: At Duluth Trading Company, we value face-to-face interactions that foster our culture of learning, creativity, and teamwork. The role is based at our headquarters near Madison, WI. You will work in the office Monday through Thursday, with the option to work from home on Fridays if you prefer. Relocation assistance is availab

Londonderry, NH, United States, NH 03053 • (28.7 miles) • Full Time • 11/6/2026

2nd Shift 3PM-11:30PM Why Hologic Hologic empowers people to live healthier lives everywhere, every day. We are the leading innovator in women's health, helping healthcare professionals around the world diagnose and treat their patients with precision, certainty, and confidence. What to Expect The Machine Operator 2 will operate production equipment to meet production quality and quantity requirements. Essential Duties and Responsibilities The incumbent may be asked to perform other function-related activities in addition to the responsibilities listed below, as reasonably required by business needs. Monitor equipment functions and operate equipment according to documented procedures. Provide technicians with details regarding equipment failure symptoms, as required. Assist with Preventive

Hollis, ME 04042 • (44.8 miles) • Full Time • 10/18/2026

Overview: Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Position: Maintenance Mechanic II Location: Hollis, ME Pay: $41.89 / per hour at hire, with $0.50/hour increases after 90 and 180 days upon successful review Shift differential: Additional 6%-8% of base pay for applicable hours worked Shift: 2-2-3 Schedule | 5:00 PM - 5:30 AM Schedule: Rotating 12-hour shifts on a 2-2-3 schedule, currently scheduled from 5:00 p.m. to 5:30 a.m. Weekend and holiday work may be required based on business needs. Six weeks of day-shift training is required

Haverhill, MA 01832 • (19.7 miles) • Full Time • 10/18/2026

ProAmpac is hiring! This position is onsite at our Haverhill, Massachusetts plant. Shift: Rotating 2:2:3 7:00pm - 7:00am Essential Duties and Tasks To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made, upon request, to enable individuals with disabilities to perform the essential functions. Safley sets up, operates, and monitors extrusion machinery and equipment as intended and needed to meet customer and production goals. Completes extrusion machine setup for production runs, including loading materials, adjusting settings, and calibrating equipement to ensure proper operation. Monitors the production process, inspects and tests materials and equipment using safe and proper protocols, to e

Lynnfield, MA 01940 • (32.8 miles) • Full Time • $22.00 / hr • 10/24/2026

Through our dedicated associates, Conduent delivers mission-critical services and solutions on behalf of Fortune 100 companies and over 500 governments - creating exceptional outcomes for our clients and the millions of people who count on them. You have an opportunity to personally thrive, make a difference and be part of a culture where individuality is noticed and valued every day. Onsite Print Operator Pay: $22.00 per hour - please note this rate may be below your state’s minimum wage. Consider this when applying . Schedule: Monday-Friday | 3:00 PM - 11:30 PM EST - No Weekends! Location: Lynnfield, MA Position Summary As a member of the team, the Print Operator is responsible for processing healthcare documents, printing checks and transaction statements, performing quality contr

Dover, NH 03820 • (14.8 miles) • Full Time • 11/12/2026

Level: We are considering mid - senior level candidates for this role. Location: This position will be on-site full-time in Dover, NH. The position holder will need to be within commuting distance (within 45 min). Applicants must be authorized to work for any employer in the U.S. At this time, we are unable to sponsor or assume sponsorship of an employment visa. Summary: The CNC Machinist is responsible for machining and fabricating precision fixtures, molds, and parts to ensure quality and compliance. The role maintains shop equipment and safety standards, supports tooling and material purchasing, and collaborates with engineering, automation, and technical services to improve manufacturability and production efficiency. Essential Duties and Responsibilities: Fabricates (including setup a

Somersworth, NH 03878 • (19.2 miles) • Full Time • 11/12/2026

Build a strong Foundation both professionally and personally with a career at KFC! We’re looking for people who love serving customers, have experience in the restaurant industry and who want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun and friendly service to our customers, KFC is the perfect place to learn, grow and succeed! We offer the following: A commitment to promote from within Training and mentorship programs Tuition reimbursement and scholarship opportunities Reward and recognition culture Competitive Pay Flexible schedules- day, night and evening shifts Free meal each shift Eligibility to accrue paid vacation time Career advancement and professional development opportunities Medical benefits Health and

Lynn, MA 01906 • (36.4 miles) • Full Time • $75,000 to $120,000 / yr • 11/12/2026

Benefits/Perks Flexible Schedule Competitive Pay Career Advancement Description/Job Summary LXC Engineering group, an engineering firm, has an opening for an innovative Mechanical Engineer in our growing Massachusetts office. This position has excellent potential for motivated individuals interested in growing their technical and management expertise within mechanical and sustainability and developing their leadership abilities. Job Description The Mechanical Engineer will perform engineering calculations and prepare detailed mechanical engineering drawings for HVAC, Plumbing, and Fire Protection design for buildings primarily within the higher education, science and technology, utility, data center, cannabis, manufacture, industrial, and healthcare market sectors. The Sr. Mechanical Engin

Boston, MA 02108 • (44.6 miles) • Full Time • $40.00 to $50.00 / hr • 11/12/2026

*Follow this link for a realistic job preview and videos of what it's like to work at KTA!*: https://kta.com/working -at-kta/ KTA-Tator, Inc. (KTA) is a 100% employee-owned materials engineering firm, internationally recognized as a leading expert in corrosion protection and asset integrity. Five business units comprise the $40 million enterprise offering a broad range of coatings, steel, concrete fabrication and building envelope inspection, evaluation, and testing services in nearly every market and industry. KTA is recruiting experienced AMPP Senior Certified Coating Inspectors (NACE Level 3)open to traveling across the U.S. for extensive periods of time. Opportunities are open to candidates with the following qualifications: High School Diploma or GED equivalent AMPPSenior Certified Co

Haverhill, MA 01831 • (18.6 miles) • Full Time • $18.00 to $25.00 / hr • 11/12/2026

Benefits: 401(k) matching Health insurance Paid time off SERVPRO of Haverhill/Newburyport Demolition Technician Do you love helping people through difficult situations? Then, don’t miss your chance to join our franchise as a new Restoration technician. As a new Restoration technician at SERVPRO of Haverhill/Newburyport, you will be a part of a team of quality people who focus on excellent service, fairness, and mutual respect. The Restoration technician performs production processes to fulfill the service needs of individual restoration projects and maintains the professional appearance of SERVPRO equipment, as well as an assigned service vehicle. By providing quality, consistent, efficient work, the Restoration technician represents the best in the cleanup and restoration industry. As a v

Derry Village, NH 03038 • (23.6 miles) • Full Time • $20.00 to $22.00 / hr • 11/12/2026

Build What Matters at StenTech Derry, NH Imagine walking onto the floor at 1:50 PM, reviewing the day’s prints, and preparing a CNC cell for a flawless run. By 2:15 PM, first-article checks confirm you’ve nailed the setup. Throughout the evening, you keep quality tight, production steady, and the workspace safe and orderlypartnering with engineers and teammates every step of the way. Mission Transform engineering intent into precisely made partssafely, reliably, and efficientlywhile continuously improving the process and your own skills. Core Responsibilities Set up and operate CNC machines to meet print specifications and quality targets. Calibrate equipment and verify offsets/parameters to ensure optimal performance. Monitor operations to maintain accuracy and throughput; adjust as neede

Derry Village, NH 03038 • (23.6 miles) • Full Time • $40.00 to $60.00 / hr • 11/12/2026

Job Title: Electrical Test Engineer Job Description The Electrical Test Engineer designs, prototypes, and tests electronic circuits to develop advanced flame scanners and combustion control products for industrial and commercial applications. This role ensures products meet regulatory standards, quality, cost, and schedule targets while providing full ownership across the development process, including design changes, prototyping, PCB and board-level work, testing, troubleshooting, and documentation. The engineer collaborates closely with hardware, firmware, design validation, and cross-functional teams to support both new product development and sustaining/value engineering initiatives. Responsibilities Design, prototype, and test electronic circuits for flame scanners and combustion cont

Beverly, MA 01915 • (28.4 miles) • Full Time • $18.00 to $20.00 / hr • 11/12/2026

Job Title: Cannabis Technician Company: Baked Beans Farm Location: Beverly, Massachusetts Join a Team That's Building Something Big Baked Beans Farm is not your average cannabis company. We are a fast-growing Massachusetts manufacturer producing high-quality infused cannabis products including pre-rolls, infused pre-rolls, edibles, concentrates, and vape products. We also support white-label and co-packing partners, which means our team moves fast, works hard, and plays a major role in building products that reach shelves across the state. We are looking for driven, hard-working Cannabis Technicians who are passionate about cannabis, take pride in doing things the right way, and want to be part of a company that is growing fast and going places. This role is for people who want more than j

Manchester, NH 03109 • (28.9 miles) • Full Time • $40.00 to $55.00 / hr • 11/12/2026

Day in the Life Manchester, NH Step into our Manchester, NH facility and own the path from code to chip. You’ll craft toolpaths in Mastercam for intricate, multi-axis parts, then bring them to life on Fanuc-controlled VMCs. Your fingerprints will be on faster setups, cleaner processes, and repeatable quality that delights demanding aerospace/defense customers. What You’ll Do Develop Mastercam programs for multi-axis CNC operations to produce tight-tolerance components. Engineer and refine manufacturing processes to elevate throughput and part quality. Set up and run CNC mills, primarily with Fanuc controllers, verifying performance against specs and tolerances. Partner with machinists, quality, and engineering to troubleshoot and resolve issues on the floor. Analyze production metrics to t

Londonderry, NH 03053 • (29 miles) • Full Time • $21.00 / hr • 11/12/2026

Title: Assembler Location: 9Londonderry, NH Duration: 12 Months Start time: 1st shift position - 5:00 AM-3:00 PM (4/10) Monday-Thursday

Manchester, NH 03103 • (31.1 miles) • Full Time • $86,000 to $102,000 / yr • 11/12/2026

Benefits: 6 Paid Holiday 1st year 80-hours PTO and second year 120 hours PTO Health insurance Paid time off 401(k) Company parties Competitive salary Training & development Employee discounts Opportunity for advancement About the Role: INSOURCE DESIGN & MANUFACTURING TEC is looking for a talented Manufacturing Engineer to join our team in Manchester, NH. This is an exciting opportunity to play a key role in designing, improving, and optimizing manufacturing processes in a dynamic and innovative environment. If you're passionate about engineering solutions and thrive on the shop floor, we want to hear from you! Responsibilities: Design, develop, and optimize manufacturing processes to improve efficiency and reduce costs Collaborate with design and production teams to ensure manufacturabilit

Peabody, MA 01960 • (31.6 miles) • Full Time • $80,000 to $100,000 / yr • 11/12/2026

Electromechanical Manufacturing Engineer Summary We are looking for a hands-on Manufacturing Engineer to support the Systems Manufacturing Group (SMG), which builds complex electro-mechanical assemblies and systems. The ideal candidate is strong in electrical assembly, system integration, troubleshooting, build documentation, and production support. This is a floor-oriented role that works closely with technicians, engineering, quality, purchasing, and production leadership. This is not a pure design role. It is a manufacturing engineering role for someone who can help SMG build better, safer, and more repeatable systems. Responsibilities Support SMG production builds from release through final assembly and test. Troubleshoot electrical and electro-mechanical production issues involving wi

Peabody, MA 01960 • (31.6 miles) • Full Time • $23.00 to $30.00 / hr • 11/12/2026

Role Summary Specter Aerospace is seeking a PLC/Controls Engineer Co-op (4-6+ month cycle) to contribute to the development, integration, and testing of control systems within the Specter engine test facility. This role offers hands-on experience across the controls engineering lifecycle, including requirements development, PLC software design, electrical control-panel design, hardware integration, system shakedown, debugging, and testing. A successful candidate will take ownership of assigned control-system projects and work closely with controls, propulsion, electrical, mechanical, and test engineers to develop systems that support Specter’s experimental and flight vehicle programs. About Specter Aerospace Specter Aerospace is building the next generation of hypersonic vehicles for U.S.

Hudson, NH 03051 • (32.8 miles) • Part Time • 11/12/2026

W.H. Bagshaw Co. is seeking an organized CNC Tooling & Inventory Intern to implement shop floor tooling systems and inventory cataloging. This position focuses on organizational logistics, categorization, systems, and detail-oriented inventory control in a precision manufacturing environment, rather than hands-on machining. Students interested in industrial engineering, operations, or supply chain management are strongly encouraged to apply. Details: Employment Type: Part-Time Internship Hours: 8–12 hours per week (2–3 evenings or afternoons per week) Key Responsibilities Tooling Inventory & Categorization: Sort, count, and systematically catalog CNC tooling components, including collets, guide bushings, gripper collets, and channel sets. Storage & Organization: Maintain organized storage

Wilmington, MA 01887 • (33.5 miles) • Full Time • 11/12/2026

Pay Rate: Minimum $22.00 hr - Maximum $23.00hr Our wage ranges are based on paying competitively for our company's size and industry, and are one part of the total compensation that may also include incentives, benefits, and other opportunities at PODS. In accordance with New York, Colorado, California, Washington and other applicable laws, PODS is required to provide a reasonable estimate of the compensation range for this role. Individual pay decisions are ultimately based on a number of factors, including qualifications for the role, experience level, skillset, geography, and balancing internal equity. A reasonable estimate of the current wage range is listed below. JOB SUMMARY Responsible for operating forklift to load and unload containers; assist with ensuring a safe and clean workin

Merrimack, NH 03054 • (35.9 miles) • Full Time • $140,000 to $170,000 / yr • 11/12/2026

Job Title: Staff Power Electronics Hardware Design Engineer Job Description Trystar’s team members are our most important asset. We are looking for a Staff Power Electronics Hardware Design Engineer to own the hardware of our power conversion products, from topology selection through validated prototypes and release to commercial-scale manufacturing. You will design the power stages, gate drives, protection, and supporting circuits of rectifiers, inverters, and DC/DC converters that operate at, for example, up to 2200 VDC and 800 kW, and you will set the hardware design rules that a product line follows. You will lead the hardware workstream as a senior individual contributor, work closely with the controls, firmware, PCB design, mechanical, test, and compliance engineers who build these p

Burlington, MA 01803 • (37.9 miles) • Full Time • $31.00 to $45.00 / hr • 11/12/2026

Commercial Painting Foreman $30–$45/hour Lead. Build. Grow. Our leadership team brings over 40 years of experience in commercial painting, and it shows in the quality of our work and the strength of our reputation across New England. As a family-run company, we protect our culture through craftsmanship, consistency, and strong leadership on every jobsite. We're hiring an experienced Commercial Painting Foreman to run field crews on commercial projects throughout New England. You'll drive productivity, hold the line on quality and safety, and make sure every job reflects the standard we're known for. Pay & Benefits • $30–$45/hour based on experience • Performance-based bonus opportunities • Company gas card • Year-round, steady work with established clients • Health, dental, and vision insu

Revere, MA 02151 • (39.7 miles) • Full Time • $60000.00 to $71644.00 / hr • 11/12/2026

North Suffolk is looking for a Quality Enhancement Specialist to join our team! The Quality Enhancement Specialist supports clients and staff in the Quality Management Department by providing comprehensive, spot, and any additional auditing processes as needed in coordination with licensing authorities, Licensing and Certification preparation processes. This position is full-time (36 hours per week) Monday-Thursday 8am-5pm ONSITE in Revere, MA. What you'll do: Coordinate Licensing and Certification preparation processes in conjunction with the Director of Quality Management, Service Coordinators, and Program Managers. Be a member of the Positive Behavior Supports Leadership Team Coordinate and lead the comprehensive audit process with managers twice per year at each program Compile compreh

Bedford, MA • (40.3 miles) • Full Time • 11/12/2026

As a Senior Mechanical Engineer at Lexington Medical, you will design AEON surgical stapling instruments in Bedford, MA while mentoring a team engineers. You will stay hands-on in mechanism design, guide mechanical and product engineers through real projects, and own the work from first requirements to updating the Design History File. The mentoring role is designed to grow into managing the team directly. About Lexington Medical Lexington Medical is a medical device company designing and manufacturing surgical stapling technology at our headquarters in Bedford, Massachusetts, just outside Boston. Our AEON Endoscopic Stapler is an FDA-cleared, minimally invasive surgical stapler used in operating rooms around the world. With engineering, manufacturing, and quality working closely together,

Bedford, MA • (40.3 miles) • Full Time • 11/12/2026

DCS has an exciting opportunity for a Business Process Support Professional providing support to the Air Traffic System Branch in the Aerospace Management Systems Division (AFLCMC/HBA). The Aerospace Management Systems Division is responsible for developing, delivering, and sustaining the Department of the Air Force’s critical air traffic management, landing systems, CNS/ATM avionics, and weather sensing and forecasting capabilities. These capabilities enable resilient airspace operations and provide essential situational awareness for the USAF, USSF, Joint, and Coalition forces. This division also supports execution across multiple mission areas. Its main efforts include Air Traffic Management Systems, CNS/ATM Avionics Engineering, Weather Sensing and Forecast Technologies, and an extensi

Milford, NH 03055 • (44.1 miles) • Full Time • 11/12/2026

Who We Are Alene Candles LLC is a private label, contract manufacturer that produces high-quality candles for some of the world’s most recognized retail, boutique, and cosmetic brands. With our headquarters in New Hampshire and 2 locations in Ohio, we’ve been in business for almost 30 years. We are passionate about making the best products in the world, making safety our number one priority, and being an insanely great place to work. We have been selected as a "Best Company to Work For" in 2020 and 2021 and 2023 Business of the Year for Manufacturing by BusinessNH Magazine. The Position Bring creative designs to life as a Digital Printing Press Technician! In this role, you will operate and maintain specialized digital printing and priming equipment used to decorate products for Alene’s cu

Amesbury, MA 01952 • (9.3 miles) • Full Time • 11/12/2026

Position at a Glance: Location: Salisbury, MA Relocation: Out-of-state candidates are welcome to apply; relocation to Salisbury, MA or the surrounding local area is required. Eligible out-of-state candidates may receive a $5,000 relocation allowance. Schedule: Typical hours are approximately 6:00 AM–2:30 PM. Schedule may vary based on project and customer needs. Travel: Travel may be required based on project and customer needs. Per Diem: Per diem is provided when staying overnight outside of the Salisbury, MA area. Role: Working foreman position responsible for supervising and directly participating in machinery moving activities with one or more crews. Benefits: Health Dental Vision 401k with an employer match Company Paid Basic Life/AD&D Voluntary Life/AD&D Company Paid Short Term/Long

Rochester, NH 03867 • (23.8 miles) • Full Time • $26.00 to $28.00 / hr • 11/12/2026

Summary Provides process tech nical support for all site functions and processes, including visual inspections, functional test, cosmetic refurbish, repair, and receiving/shipping of product. Specific tasks include creation and maintenance of work instructions, PFMEAs, operational risk assessments, operation/function time studies (feeding both financial and capacity models), 5S, and systems maintenance for bill of materials (BOMs) and process flow routings. Standard hours are Monday – Friday, 8:00am – 4:30pm. Detailed Description: Regularly provide technical support / guidance for operations related functions and processes, including visual inspections, functional testing, cosmetic refurbish, repair and receiving / shipping of product. Create and maintain work instructions Lead and facilit

Nashua, NH 03064 • (35.4 miles) • Full Time • $24.00 to $26.00 / hr • 11/12/2026

Role summary Pure Process Technology (PPT) designs and manufactures high-purity water systems and Solvent Purification Systems (SPS) for biotech, life science, and research labs. The Shop Technician supports production flow, shop organization, column production, media tank re-bedding, logistics support, and facility organization. This role is a development track to Service Technician I. Core responsibilities - Shop Technician • Column production using PPT standard procedures and checklists. • Media tank re-bedding with strong cleanliness, labeling, and staging discipline. • Pick-ups and drop-offs for vendors, customers, and service technicians (as assigned). • Support shipping and receiving tasks (material handling, packaging support, issue reporting). • Support facility maintenance, clean

Woburn, MA 01801 • (37.8 miles) • Full Time • $55,000 to $60,000 / yr • 11/12/2026

What We’re Looking For : We have an exciting opportunity to join a fun, employee-focused environment with a growing manufacturing company. The Production and Scheduling Coordinator will be responsible for releasing job orders to the manufacturing floor, coordinating with several departments for accuracy and on time delivery. Responsibilities range fromverifying that raw material Certificates of Analysis comply with customer specifications to assure material availability, complete documentation and heat control complies with Company and customer requirements. If your personal mantra is “Professionalism, Confidentiality, and Motivation equal Success and that Success is me” we want to hear from you! What You’ll Need To Be Successful : A High School Diploma, some college is preferred. A backgr

Burlington, MA 01803 • (37.9 miles) • Full Time • 11/12/2026

Senior Director, Quality Control At Vericel Corporation, we are pioneers in advanced cell therapies for sports medicine and severe burn care, transforming patient lives through cutting-edge regenerative medicine. Our commitment to innovation, patient-centered focus, and scientific excellence drives us to develop groundbreaking treatments including MACI (knee cartilage repair), Epicel and Nexobrid (burn care). Position Summary The Senior Director of Quality Control is responsible for the strategy, leadership, and performance of Quality Control activities that support the safe, compliant and timely manufacture, testing and release of Vericel's cell therapy products to patients. This role leads Quality Control laboratory operations and testing oversight, including product, raw material, micro

Boston, MA 02210 • (44.9 miles) • Full Time • $116,000 to $162,750 / yr • 11/12/2026

Description: Welcome to an inspired career. At Halozyme Hypercon, a wholly-owned subsidiary of Halozyme Therapeutics, Inc. , we are reinventing the patient experience and building the future of drug delivery. We are passionate about the important work we do and constantly strive to do more. We embrace transformation and work hard to innovate for the future. We do this together, as One Team – we rise by lifting others up and believe in the power of working together for the collective win. That’s why we need youto help us make a significant impact by taking on increasingly complex challenges, leaping beyond the status quo, advancing our mission and making our One Team culture thrive. Join us as Senior Engineer II, Manufacturing Science and Technology, and you’ll be part of a culture that wel

Portsmouth, NH 03801 • (6.6 miles) • Full Time • $35.00 to $40.00 / hr • 11/12/2026

**Machinist ** Location: Newington, NH, 100% Onsite Shift: 2nd Shift (3:30 PM – Midnight), 3rd Shift (Midnight – 7AM) Pay Range: $35.00–$40.00/hour (based on qualifications) Build a Career That Powers the Future As a Machinist , you will help support the manufacturing needs of all nuclear power plant projects while producing high-quality spare parts essential to plant operation and reliability. Your work will directly contribute to the safe, reliable generation of clean energy around the world. **Join a union team where skilled tradespeople support one another, take pride in their work, and uphold the highest standards of safety, quality, and craftsmanship. **At Westinghouse, you'll expand your expertise through cross-training on multiple machines and manufacturing processes. As a result,

Newburyport, MA 01950 • (11.9 miles) • Full Time • $25.00 to $30.00 / hr • 11/12/2026

Join Inovar Packaging Group Inovar Packaging Group, LLC is a leader in North American label and packaging solutions, operating advanced flexographic and digital presses. We invest in cuttingedge equipment, nurture craftsmanship, and work through trust, teamwork, and customer-first partnerships. The Role at a Glance As a Flexographic Press Assistant, you’ll be the right hand to our press operatorsstaging materials, supporting setups, and keeping production moving smoothly and safely. Your eye for detail and mechanical know-how help ensure consistent, top-tier print quality and on-time delivery. A Day in the Life You arrive, review the day’s job tickets, and ready the press bay. Substrates and inks are staged, plates and tooling are verified, and the press is set for an efficient start. Duri

Manchester, NH 03103 • (31.1 miles) • Full Time • 11/12/2026

Description: Location: This is an on-site position located in Manchester, NH. Relocation assistance is not available Starting Pay $75,000- $90,000.00 / year DOE Why Join TCI? Textiles Coated International (TCI) has been manufacturing high-performance fluoropolymer films, laminates, and composites since 1985. Our products are used worldwide in aerospace, medical, chemical processing, power generation, and other demanding industries where quality and reliability matter. At TCI, you'll join a stable, growing manufacturing company that invests in modern equipment, employee development, continuous improvement, and product innovation. What You'll Do The Process Engineer is responsible for developing, optimizing, and implementing cost-effective manufacturing processes that consistently meet produ

Wilmington, MA 01887 • (33.5 miles) • Full Time • $23.00 to $26.00 / hr • 11/12/2026

About LightForce LightForce is transforming orthodontics through a fully digital, 3D-printed platform that drives efficiency, elevates clinical consistency, and makes treatment outcomes more predictable. Our patient-specific brackets, paired with AI-guided treatment planning, redefine personalization at scale. Learn more at www.lf.co. Your day at a glance Step onto a production floor where precision meets purpose. You’ll rotate between equipment setups, real-time monitoring, and detailed inspectionsall to ensure customized orthodontic appliances ship accurately and on time. You’ll partner closely with hardware engineers and dental planners, and you’ll coordinate with leadership to keep operations flowing. This role reports to the Manufacturing Project Manager. Third-shift and weekend sched

Lowell, MA • (34.3 miles) • Full Time • 11/12/2026

We are a small, agile, R&D-driven, and mission-oriented companyworking at the interface of engineering, biology and micro/nano-systems. We design and build real-world electromechanical systems where mechanical design, custom electronics, and embedded firmware are tightly integrated. If you thrive in a hands-on environment where you move quickly from concept to prototype to system, you will feel at home here. As a R&D Robotics Engineer , you’ll work end-to-endfrom CAD and mechanism design to hardware bring-up and firmware integration. This role is ideal for engineers who identify primarily as mechanical engineers but are confident in designing electronics and writing firmware to make hardware move. You will be expected to execute independently and contribute to the progression of technologi

Lowell, MA 01851 • (35.3 miles) • Full Time • $35.00 to $45.00 / hr • 11/12/2026

CNC Machinist / Programmer (Lathe & Mill) Axis Technologies Inc. | Lowell, MA $35–$45/hour + shift differential | Full-time | 1st & 2nd shifts Since 1987, Axis Technologies has been a premier supplier of precision, close-tolerance CNC machined parts and sub-assemblies. We work on both prototypes and production runs in a modern, climate-controlled 14,000 sq ft facility equipped with multi-axis mills, live-tooling lathes, and advanced inspection equipment. We’re looking for a skilled CNC Programmer who takes pride in accuracy and wants to join a collaborative team that values craftsmanship. What you’ll do • Develop, optimize, and troubleshoot CNC programs for lathe and milling operations using Mastercam. • Set up and operate CNC machines (setup experience is a plus). • Perform in-process and

Nashua, NH 03060 • (35.8 miles) • Full Time • 11/12/2026

ARC Technology Solutions designs, builds, and sustains complex test systems and critical technologies across the full program lifecycle. Position Summary The Manufacturing Engineer I supports design transfer out of R&D as well as develop, implement, and improve Manufacturing capabilities. Contributes to product design improvements intended to achieve higher reliability, serviceability, operability, and manufacturability. Train technicians, operational and manufacturing personnel on manufacturing equipment operation, procedures, and inspections. Responsibilities Using lean and six sigma concepts to implement process efficiencies. Troubleshoots manufacturing design and process issues to ensure the highest level of quality. Writes ECOs to improve the design/process for ease of manufacturing.