FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Markem-Imaje is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjets, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes.Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment.Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.The Role:Working in a team-oriented workplace, Electrical Engineer IV will effectively apply electronic skills to perform activities concerned with analysis, design, testing/troubleshooting and manufacturing of products/systems including the application of these products/systems to commercial, industrial and scientific uses. As required by the business, works closely with other engineering disciplines in the development and application of products/systems or services.Job Responsibilities:• An excellent understanding of the Customer’s requirements, expectations, and application environment as it relates to product/system performance is required.• Execution of Customer requirements/expectations into product variations/enhancements or a new product idea is expected.• Collaboration and teamwork with other functional departments such as Reliability, Value Stream, Manufacturing Engineering, Test Engineering, GPS, Tech Service, Depot Centers, Sourcing, Business Centers, Product Management, etc., is required to ensure product/system performance objectives are met.• Timely resolution of product/system issues that affect MI’s internal and external Customers, which may involve engineering research, redesign, test & validation, documentation and communication is expected.• Responsible for all phases of product development including the specification, design, component selection, implementation, verification and validation of products and services. May provide technical leadership to a small group of assigned engineers and technicians.• Principle responsibility/ownership in the development of new electronic circuits or systems.• Proficient in the use of computer-assisted engineering and design software/equipment such as ECAD to perform assignments which include schematic capture and circuit simulation.• Recommend complex components, architectural systems and equipment based on analysis of specifications and reliability. May also review vendor capability and make recommendations to support product development.• Determine, plan and execute design approaches and parameters through the research, assimilation and application of new technology, utilizing creative problem-solving skills such as DOE/FMEA in order to develop new electrical analysis methods.• Remain current with a variety of the field's concepts, practices, and procedures.• Principle responsibility/ownership towards the continuous improvement efforts within the R&D community.• Perform, guide or lead complex electrical design functions associated with new product development. Comfortable working with and/or directing the mechanical, chemical, and electromechanical aspects of project.• Collaborate with and direct other engineers/peers in the acquisition, analysis and verification of electrical performance to specification through simulation and measurement. (E.g. power factors, electronic architecture timing, I/O, User Interface, communication ports, etc.).• Ensure successful completion of the assigned project/task within the budgeted time and cost constraints.• Participate in key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Work closely with local business/technical centers, sales and service representatives in order to generate revenue generation opportunities.• Identify new and/or works with existing suppliers and subcontractors on specifications, designs, schedules, etc. in the support of projects and production equipment. Coordinate key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Coordinate, lead and/or participate in design review meetings and associated activities.• Actively participates in the annual business planning sessions related to Electrical R&D.• Maintain laboratory notebooks in accordance with requirements of research/ design/development process.• Travel and/or interfacing with Customers, Business Centers is expected and encouraged.• Perform other related duties as assigned by management.Job Requirements:• Master’s Degree with a minimum of 8 years of experience in a related field or a Bachelor’s Degree with 10 years of experience.• On-going, advanced coursework in Electrical/Electronic Engineering required.• 10+ years of experience developing PCBAs.• Demonstrated ability to design and enter schematics (Altium a plus) and a superior knowledge and experience of digital, embedded CPU and analog circuits.• FPGA and/or C programming skills a plus.• The candidate should be able to develop their assignments will minimal direction as well as functional as part of a cross-functional and international product development team.• Mentoring and leadership of less experienced personnel in an agile environment.• Expertise in more than one of the following is required: system design, analog and digital circuit design, solid state power electronics and power conversion, microprocessor and digital signal processor, software, local area networks, wireless communications, data logging, and electromechanical devices.• Complex analog and digital design capability that includes expertise with low- and high-density integrated circuits, microprocessors/microcontrollers, motor controllers, display drivers, communication drivers, input/output devices, power supply circuits/conditioning, wiring diagrams and cable management. Experience with architectural design/manufacturing that includes VHDL, FPGA, CPLD, BGA and SMT.• Expertise with PCB design, testing, analysis and validation required.• Expertise with EMI/EMC design, testing techniques and Agency certification practices required.• Programming knowledge of C++ is preferred.• Proven track record of success for designing, implementing and manufacturing reliable product designs.• Expert use of test equipment/apparatus, computer-assisted engineering and design software, circuit board processes, etc.• Expertise with the use of ECAD for schematic capture and circuit simulation, oscilloscopes, DMM’s, logic/spectrum analyzers, signal generators and data logging equipment.• Expertise utilizing Design of Experiments (DOE) methodology is required.• Proficient knowledge of common software programs, including Word and Excel.• Strong leadership, Customer, interpersonal communication and mentoring skills a must.• Demonstrated aptitude in Engineering Excellence: FMEA, DFT, DFM, Root Cause Analysis, Design of Experiments, etc.The right candidate will be aligned to our values and culture: • Collaborative entrepreneurial spirit • Winning through customers • High ethical standards, openness and trust • Expectations for results • Respect and value peopleIf you believe you match our values and have the experience we’re looking for, apply! We can’t wait to hear from you!Work Arrangement: Onsite Salary Range: $150,000.00 - $170,000.00 We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.Job Function:

This position drives security engineering solutions, framework, roadmap, program optimization, process engineering, risk remediation, and mitigation of operational risk in a high-velocity culture by introducing technology, requirements, deliverables, gaps and systems design. Analyzes competitive strategies, cyber technologies, metrics models, and performance indicators.Position Compensation Range:$111,000.00 - $190,000.00Pay Rate Type:SalaryCompensation may vary based on the job level and your geographic work location. Relocation support is offered for eligible candidates.Technical Expertise:Oversee the organization’s privileged access management systemBuild, deliver, maintain, and update technology, platform, and system solutions in the Identity and Access Management space that addresses business and technical requirements, leveraging standard policies and standardsPartners with other Technology Team members to provide advice or solutions within his or her area of expertise.Stays informed about current developments within his or her expertise.Analytical Expertise:Identifies problems, performs root cause analysis, investigates information, performs impact analysis, and formulates and executes plans to develop solutions.Identifies strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.Understands and can estimate effort and value for solutionsUnderstands at a broad level how technology platforms/architectures are applied to automated business solutions.Business Knowledge:Actively engaged in industry, domain, process or technology trends, especially as it pertains to Identity & Access Management and Cybersecurity.Task Management:Acts as a coordination and facilitation point for organizing work efforts.Sets up or follows established procedures to ensure high quality of work.Understands dependency identification processes in technology work, verifies information and carefully reviews and checks the accuracy of the teams work.Establishes or follows prioritization processes to drive work and has a sense of urgency about getting work completed.Looks for and seizes opportunities to do more or to do things better.Communication:Appropriately shares ideas and information with othersPractices attentive and active listening.Ensures that regular and consistent communications take place.Expresses ideas as well as business or technical requirements clearly and concisely in writing using appropriate levels of summary and synthesis.Expresses oneself clearly in conversation and interaction with others.May perform other job duties as directed by Employee’s Leaders.Critical Skills:Excellent partnering, communication, and negotiation skills in working with various Teams and/or external partners.Able to analyze large, complex, or vague business or technical problems, articulating the problem or root cause, and translating the analysis into viable solution recommendations.Able to work effectively in a strong, business customer service and team oriented environment.Ability to manage and prioritize multiple and widely varied work streams / tasks.Able to develop, present and effectively communicate ideas and strategies to a variety of audiences.Able to teach and mentor others concerning technical and business subjects.EducationDegree in Computer Science, ComputerEngineering, Information Systems, or equivalent work experienceRequired Skills7+ years’ experience working as a senior PAM engineer or equivalent positionExperience with PAM/PUM/PM tools such as CyberArk, BeyondTrust, Delinea, and equivalent solutionsExperience with Agile Practices like Scrum, Kanban, CI, CD preferredExperience with build/tooling such as Git, Stash, Jenkins, Jira, and Confluence preferredExperience working in a team according to Agile development methodologiesMust be able to demonstrate a firm understanding of the concepts of password vaulting, privileged session management, secrets management, and DevSecOpsExperience with creating credential vaults, defining access control policies/platforms, user provisioning and entitlements, managing applications credentials, key management, and user access policy management.Ability to complete root-cause analysis on complex issuesTroubleshooting highly complex issuesStrong Knowledge of Risk and Compliance initiatives including PCI, SOX, HIPAAKnowledge of the NIST Cyber Security FrameworkPreferred Skills7+ Years of experience with other IAM disciplines such as Lifecycle Management, Directory Management, or Identity GovernanceIAM or Cybersecurity Engineering BackgroundExperience with Identity Proofing methodologiesExperience with REST/SOAP API’sHas web development experience (HTML, JSP, CSS, JavaScript, and/or PHP)Financial or insurance industry experienceRelevant certifications (e.g., CISSP, CISM, CEH) are a plus.LicensesNot Applicable.Travel RequirementUp to 10%.Physical RequirementsWork that primarily involves sitting/standing.Working ConditionsNot Applicable.We encourage you to apply even if you do not meet all of the requirements listed above. Skills can be used in many different ways, and your life and professional experience may be relevant beyond what a list of requirements will capture. We encourage those who are passionate about what we do to apply!We provide benefits that support your physical, emotional, and financial wellbeing. You will have access to comprehensive medical, dental, vision and wellbeing benefits that enable you to take care of your health. We also offer a competitive 401(k) contribution, a pension plan, an annual incentive, 9 paid holidays and a paid time off program (23 days accrued annually for full-time employees). In addition, our student loan repayment program and paid-family leave are available to support our employees and their families. Interns and contingent workers are not eligible for American Family Insurance Group benefits.We are an equal opportunity employer. It is our policy to comply with all applicable federal, state and local laws pertaining to non-discrimination, non-harassment and equal opportunity. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law.#LI-BC2

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

NVIDIA has continuously reinvented itself over two decades. Our invention of the GPU in 1999 fueled the growth of the PC gaming market, redefined modern computer graphics, and revolutionized parallel computing. More recently, GPU deep learning ignited modern AI - the next era of computing. NVIDIA is a “learning machine” that constantly evolves by adapting to new opportunities that are hard to pursue, that only we can tackle, and that matter to the world. This is our life’s work, to amplify human creativity and intelligence. Make the choice to join us today.Join our dynamic team at NVIDIA, responsible for managing and maintaining high-quality VLSI development infrastructure for the Backend Networking team. We seek a dedicated and driven Software Engineer eager to manage compute and storage effectively, develop scripts and automation, create dashboards and apps while collaborating with a remote team in Israel.What you’ll be doing:Oversee and optimize compute and storage resources, ensuring operational efficiency and success of VLSI projects. Develop and maintain scripts and automation tools to streamline infrastructure tasks.Design, implement, and maintain dashboards for monitoring and reporting on infrastructure performance and usage.Work closely with a remote team in Israel, ensuring smooth communication and coordination on infrastructure-related tasks.Engage in the entire lifecycle of infrastructure tool development, including design, testing, deployment, and maintenance.Collaborate with other team members and DA teams to implement innovative software solutions and practices.What we need to see:Bachelor’s degree in computer science/engineering or equivalent experienceMinimum 3 years' experience with VLSI Design Automation.Strong proficiency with UnixProven experience in at least two programming languages, including Python, and scripting.Good debugging and problem-solving skillsStrong interpersonal skills along with the ability to work in a diverse teamWays to stand out from the crowd:Basic understanding of data structures and algorithms, specifically those related to Graph Theory. Experience with SQL and LSB scheduler.Experience with GUI and Unix/web application development. Familiarity with programming languages such as C++, Tcl, Python, or other scripting languages like Perl and Shell.NVIDIA is widely considered to be one of the technology world’s most desirable employers. We have some of the most experienced and dedicated people in the world working for us. Are you creative and autonomous Do you love the challenge of constant innovation and creating the highest performance products in the industry If so, we want to hear from you.The base salary range is 108,000 USD - 212,750 USD. Your base salary will be determined based on your location, experience, and the pay of employees in similar positions.You will also be eligible for equity and benefits. NVIDIA accepts applications on an ongoing basis.NVIDIA is committed to fostering a diverse work environment and proud to be an equal opportunity employer. As we highly value diversity in our current and future employees, we do not discriminate (including in our hiring and promotion practices) on the basis of race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other characteristic protected by law.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationManage assigned projects to an on-time and on-budget completion to include new and takeover club locations; remodels and expansions; and new club gas facilities. This position is responsible for assisting and coordinating with real estate directors for the hiring of Consultant teams; representing the companies interests in public meetings and hearings; facilitating complete project approvals from State, Federal and local municipalities; the development of construction documentation that is in accordance with the company prototype, budget and schedule; on all assigned new club developments. Project involvement will range from Landlord reverse build-to-suits to full self-develop owned projects which may include surplus property for other retail uses. This position is to maintain a current schedule and budget update on all assigned projects and report same to real estate directors on an as needed basis.Utilize existing criteria for RFP's and solicit quotes for Consultant's scope of work with assistance from the real estate directors. Support real estate directors in developing conceptual site plans and establishing projectCoordinate efforts with the real estate directors of the project team through the conceptual design and due diligence phase of the project in order to establish the development feasibility, preliminary construction budgets and schedules. Support the Real Estate Directors negotiations by providing information/documentation necessary to complete the project. Assist and coordinate the development of approval and construction documents. Work with the project team to insure compliance with the project parameters, budget and schedule. Insure the accuracy and timeliness of document development. Attend working sessions and public hearings with state and local municipality staff to review projects and prepare for public hearings. Coordinate with the project team and insure that permits are issued; fees are filed; bonds are procured; and agencies are notified in advance of constructionSchedule and arrange project meetings with Consultants, Attorneys and BJ'sAdminister contract invoicing, amendments, change orders and close out documentation for allDevelop an entitlement timeline with the team to be incorporated into the overall project schedule. Coordinate the development of construction documents for the building, civil, off-site and gas in order to maintain the approved schedule for permitting and construction. Report the progress of project approvals in order to maintain an updated project schedule that management can rely on for scheduling club openings and events. Qualifications:Bachelor’s Degree in civil engineering required, 2 to 3 years’ experience in field. Retail Corporate or Civil Engineering Design firm experience a plus. General knowledge of land use planning/civil engineering principles and with Regulatory Agency/Municipal approval process. Familiarity with retail site design with understanding of soils, drainage, environmental and other related activities. Awareness of legal and environmental issues related to land. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $80,000.00

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Information Security is crucial at UniFirst and is part of a broader Information Governance, Risk, and Compliance program within IT. The Senior Information Security Engineer will be a key factor in leveraging the current implemented security technologies and enhancing related processes and procedures. The Senior Information Security Engineer is responsible for discovering, evaluating, and delivering security technologies to protect all sensitive information. The Senior Information Security Engineer will provide technical knowledge and analysis to include applications, operating systems, vendor risk management, incident response and security awareness and training. Responsibilities: Contribute to the implementation of UniFirst’s security controls environmentProvide consultation for configuration of technologies managed by IT InfrastructureMaintain and continuously improve the security incident response planHelping with the resolution of security incidents and determining root causeEstablish baselines and monitor/report on trends and anomaliesActs as a principal resource for escalated security incidents and responseWork together with all teams to fine-tune infrastructure/application/database protection and provide input for secure software developmentConduct examinations of system logs, applications, and networks security eventsSupport IT Operations Control Center teamProviding security support for application and infrastructure related projectsConducting Security Risk Assessments on new and existing technologiesPartner in the vulnerability management programWill be a critical partner in driving an improved overall security postureQualificationsRequirements: Bachelor’s degree in Computer ScienceInformation Systems, or related discipline preferred or equivalent job experienceCISSP certification(s) preferred.Must have 5+ years of experience as a Security EngineerFamiliar with security related frameworks including CIS18, NIST and PCIExperience with Incident Management programsExperience in intrusion detection and analysisKnowledge of SPLUNK, Nessus, Email gateway, O365, and Palo Alto technologiesExperience monitoring, investigating, and solving IT security related concernsStrong interpersonal skills including strong written and oral communication skillsExperience with building & managing user awareness training programsAbility to multi-task and balance priorities Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This position will be responsible for directly overseeing installation and repairs of the Wastewater Systems and equipment as well as audit and improve operations at locations. This position will also be required to learn how to design and suggest system layouts based on plant needs. This position will handle all personnel and material logistics necessary to complete the project. Personal “hands-on” labor will be required to assist and expedite mechanical and electrical repairs. The Project Tech will report directly to the Systems Engineering Director as well as the Environmental System Supervisor. Responsibilities: Effectively schedule and utilize inside/outside contractors to complete project assigned.Coordinate resources based on UniFirst Corporation priorities.Identify deficient equipment both mechanical and electrical. Order parts needed for repairs and with the help of the location staff make needed repairsCommunicate with location on what repairs are needed and how to prevent failures in the system.Provide accurate prints of system layout, P&ID and electrical changes made when repairing system.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of wastewater systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience in the Industrial Environmental Field.Experience with MS Office, Word,Excel, MS Project.Experience or ability to learn AutoCAD to develop detailed mechanical layouts/ diagrams for WW Facilty layouts to include equipment placement, piping and electrical layouts.Experience with Electrical systems to include 460V, 240/208V, 120V as well as 24VDCExperience with mechanical systems, including Pumps, Mixers and Piping systems.Candidate must be willing to travel up to 70%, directly managing project installation.Work a 10 day ON-4 day OFF schedule when necessary to manage project installation.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant ManagementMaintain safe working environment during installation for both Contractors and Plant Employees. The estimated salary for this position ranges from $80,000.00 to $90,000.00 annually. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws