Interior Installerin GAC WestfieldInterior Installation Technician IIUnique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222701Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/15/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#

Aircraft Painterin GAC WestfieldUnique Skills:Prior aircraft or automative painting experience is preferred.Education and Experience RequirementsHigh School Diploma or GED required. 2 years in related paint processes. Aircraft industry experience preferred.. Valid Drivers License required.. Position Purpose:The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist with aircraft movement in hangars. Offer continuous improvement ideas/participate in continuous improvement activities.Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with the aircraft painting process. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223394Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/08/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#

Structural Mechanicin GAC WestfieldSheet Metal Mechanic II / Sheet Metal Technician II$4,500 Signing Bonus.Unique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Position Purpose:In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required. Able to work with minimal supervision on duties and tasks . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Properly use and maintain company-provided tools and equipment and returns items to tool room after use . Ensure standard operating procedures are followed when operating ground support equipment .Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . Assist in maintaining shop equipment and associated JSAs . Support Lean Activities .Perform other duties as assigned.Other Requirements: Must be able to read and interpret blue prints. Basic computer skills and basic shop math skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223065Category: OperationsPercentage of Travel: Up to 50%Shift: FirstEmployment Type: Full-timePosting End Date: 11/01/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#

Senior Avionics Technicianin GAC Westfield$6,500 Signing Bonus. Eligible for Relocation Assistance.Hiring for All Shifts.Unique Skills:Avionics Technicians / Avionics Electrical Techs.See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222283Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#

Senior Aircraft Mechanicin GAC WestfieldA&P Aircraft Mechanic / Aircraft Technician.$6,500 Signing Bonus. Eligible for Relocation Assistance. Hiring for All Shifts.Unique Skills:See job description for details.Prior corporate aircraft experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222282Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#

Aircraft Technician IIin GAC WestfieldA&P Aircraft Mechanic / Aircraft Technician.$6,500 Signing Bonus. Hiring for All Shifts.Unique Skills:Please see job description.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222279Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#

Avionics Technician IIin GAC WestfieldHiring for All Shifts. $6,500 Signing Bonus.Unique Skills:Avionics Technicians / Avionics Electrical Techs.See job description for detailsEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222280Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#

Avionics Technician Iin GAC WestfieldHiring for All Shifts.Unique Skills:See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams. . Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Additional InformationRequisition Number: 222278Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#

Aviation Safety Inspectorin GAC WestfieldAirworthiness Inspector A&P.$3,000 Signing Bonus.Unique Skills:2nd shift position (Tuesday - Friday)Gulfstream large cabin experience preferred.Flight Safety Initial course completion preferred.Must be able to occasionally work in confined spaces.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223331Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1146#