RoadSafe is looking for Flaggers to join our team! $1500 Sign On Bonus
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below.
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment ( work boots 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Generally, works under the Supervision of Project Manager, TCT, TCS or maybe assigned to work independently Adhere to all Company Policies and Procedures Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Must be able to communicate with contractors and relate specific customer/job changes, and other information to Supervisor, Project Manager, office staff or other persons Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: $1500 Sign on Bonus Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer 
Qualifications: Must be 18 years or older Pass a drug test Driver’s license required Must be able to speak and read English Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification, Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training All candidates subject to a background check
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and commission planPaid vacation/holidays/sick time Comprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities With outstanding internal resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, Tools and Equipment to complete all jobsProviding Scheduling and management supportJCI Employee discount programs (The Loop by Perk Spot)Check us Out: https://youtu.be/pdZMNrDJviYWhat you will do:Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Fire Suppression systems and product lines as well as similar competitive manufacturers’ product lines.How you will do it:Work with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredFire alarm license and able to obtain and retain any licenses that are required by National, State and Local codes.3 years' experience for this role documented service experience in fire alarm or fire sprinkler. Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.Preferred NICET certification #TechHiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Join us as an Industrial Maintenance Mechanicin our Blue Anchor, NJ plant. You'll collaborate with our team to keep our plant running smoothly, and continuously improve our machinery and maintenance department! The shift for this position is 7 pm to 7 am with a starting rate of $29.51. New Jersey State Refrigeration/Boiler Licenses will be paid an additional per hour as follows: Black/Blue $1.50; Black/Blue/Red $3.00; Black/Blue/Red/Gold $4.50. New hires have one year from their hire date to obtain license from the State of NJ Department of Labor and Workforce Development.The Industrial Maintenance Mechanic will be performing routine maintenance and repairs on industrial machinery and equipment. At Kellanova, we encourage collaboration with other team members to keep production lines running smoothly. In this role you will acquire proficiency in specialized equipment and automation systems, all while having the chance to pursue certifications or additional training to further enhance your skillsA Taste of What You’ll Be Doing Conducting Preventative Maintenance – Perform basic troubleshooting, repairs and preventative maintenance on mechanical and electrical equipment – your excellence will be the key to keeping production moving smoothly.Ensuring Performance Efficiency – Manage machine performance by doing equipment set-up and change-overs. You’ll facilitate production and quickly respond to equipment breakdowns. Following Best Practices – Understand, follow and enforce all established guidelines. Your attention to detail will ensure compliance with all safety, health, quality and company policies, procedures and recognized practices. You’ll help us keep delivering success, one waffle at a time.We’re Looking for Someone WithHigh school diploma or GED.Effective communication, interpersonal and organizational skills.Ability to sit, stand, walk, lift up to 50 lbs and complete repetitive tasks throughout the day.Experience with troubleshooting, repairs, and preventative maintenance on mechanical and electrical equipmentin a manufacturing setting.What’s NextAfter you apply, your application will be reviewed by a real recruiter, so it may take us a few weeks to get back with you by email or phone. Visit our How We Hire page to get insights into our hiring process and more about what we offer.Need assistance throughout the application or hiring process Email .If you join our team, you’ll be rewarded for the difference you make. Our comprehensive benefits offer you the support you need through your life events, big or small. Visit our benefits page & be sure to ask your recruiter for more specific information.Get to Know UsAt Kellanova, we are driven by our vision to be the world’s best-performing snacks-led powerhouse, unleashing the full potential of our differentiated brands and our passionate people. Our portfolio of iconic, world-class brands include Pringles, Cheez-It, Pop-Tarts, MorningStar Farms, Special K, Krave, Zucaritas, Crunchy Nut, among others.Kellanova’s Culture of Best means we bring our best to all that we do in pursuit of our vision to be the world’s best performing snacks-led powerhouse. Our culture celebrates boldness and empowers our people to challenge the status quo, achieve results, and win together.Our focus on Equity, Diversity, and Inclusion (ED&I) enables us to build a culture of belonging where all employees have a place at the table and are inspired to share their passion, talents and ideas to work. The best brands. The best people. The best you.Kellanova is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law. For more information regarding our efforts to advance Equity, Diversity & Inclusion, please visit our website here.

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on an on-call rotation.1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet. The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.Expected salary range of $123,300 to $137,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of Power plant operations while acting as a resource and technical expert to engineers. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.Provide technical expertise and consultation through direct involvement and as a subject matter expert when consulted to identify and resolve equipment and system problems.Directly fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Perform engineering tasks as assigned by supervision applying engineering principles.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSBS Engineering, and 7+ years professional experience.Has completed assigned skills and knowledge development training (applicable Advanced Engineering, EPRI, and Constellation University training or industry provided training) to develop expert level of knowledge in designated areas. PREFERRED QUALIFICATIONSGas turbine experienceDCS/PLC controls experienceDemonstrated ability to mentor other engineers in key knowledge and skills. Demonstrated proficiency leading cross functional initiatives at an asset/plant

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Remote - Pennsylvania- Exton, PA,United States (US) Employment Status: Hourly Full-Time Function: Customer ExperiencePRIMARY FUNCTIONResponsible for providing field service and support including, installation, maintenance, and training on various types of industrial automation equipment. Service & support activities will be performed both on-site at a customer’s facility or in-house at a company owned location. Core objective of high level of attendance and successful completion of Lincoln Automation Field Service Technician Trainee program. RESPONSIBILITIES Provide support for system installs and maintenance.Deliver a consistent, positive, and exceptional customer service experience.Work environment may be individually focused or working with a team.Take initiative to meet challenging project timelines and budgets.Ability to travel as required (install, start-up, or field support) to successfully complete projects.Ability to support all aspects of equipment install (Rigging, alignment, wiring, startup, etc.)Complete all work related documentation on time.Participation in “soft skills” trainings to develop strong customer-facing capabilities.Assist in any other activities that help to support ongoing strategies.BACKGROUND EXPERIENCE Preferred experience in robotic processes.Preferred Hydraulic/Pneumatic/Lubrication system troubleshooting experience.EDUCATION/TRAINING/EXPERIENCE Minimum requirement: High school diploma or GED (technical or vocational school preferred)Preferred: Associates degree focused in electrical, mechanical, mechatronics, or roboticsPHYSICAL DEMANDS While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.WORK ENVIRONMENTThe work environment is inside manufacturing facilities. Proper person protective equipment (PPE) is required at all times while in manufacturing facilities. The noise level in the work environment is usually moderate.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

$23.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You'll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You'll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We're Looking For:Valid Driver's License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. PhiladelphiaPennsylvaniaUnited States of America

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class servicesincludesHVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, servingmore than 45,000 customer locations across North America daily.WHAT WE OFFERWeare a large company serving many unique customers– because of this, we providejob stability and long-term opportunities for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPay from $38 - $55/hour WHY JOIN USWe understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include:Competitive payincluding a quarterly bonus planMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementPaid online trainingandstate-of-the-arttraining facilityto invest in YOUR career growth Opportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting.Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment.Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions.Interface with system operators/field technicians and provides technical guidance.Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning.Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner.Maintain designated project & service records, and practice consistent record keeping.Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible.Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity.Regularly improve and update product knowledge by participating in educational and product training opportunities.This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected.The position must complete other work tasks as assigned. Qualifications: The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines).Will also consider technicians that have a more holistic background and excellent experience and trackrecord around complex technologies like aircraft engines and turbines.Be able to complete technical start-up of gas engines and CHP power systems.Independently diagnose and repair power systems.Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panelwiring.Must be available to work over-time and occasionally travel on weekends.Must be able and willing to travel.Must be able to work independently.Excellent written and verbal communication skills and demonstratedproficiency composing writtencommunications.Outstanding interpersonal skills.Excellent telephone skills and computer knowledge.High energy level, comfortable performing multifaceted projects in conjunction with day-to-day activities.Resourceful, well organized, highly dependable, efficient and detail oriented.Must present a positive, professional, and team player attitude.Must be flexible and able to adapt to change quickly.Must possess a valid driver’s licenseExperience and knowledge of IP Networking including troubleshooting Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned.Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities: Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks.Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems.Required to have demonstrated knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Ability to use vehicle diagnostic software.Up to 3 years as a fleet mechanic. DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. Education and Experience: High school diploma, completion of G.E.D Required. We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $27 - $33 / hour #CAZL ExperienceRequired2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience.3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.3 year(s): Experience in repair and service of trailers and medium duty trucks.EducationRequiredHigh School or better

AutoReqId: 20481BR Pay Class: Hourly Hourly Pay Rate: $37.50 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Maintenance Technician to join our team in Camden, NJ. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. This position is a rotating 7am-7pm and 7pm-7am schedule. Two-week period on days and then two-week period on nights with days off in between. What you’ll get to do Execute preventive and predictive mechanical & electrical maintenance activities according to work orders and or inspection sheets on all equipment and plant areas.Execute basic corrective mechanical as well as electrical work on all equipment and plant areas.Provide accurate feedback on work orders and inspection sheets with all required information.Review and follow up daily with work requested and provide feedback to improve documentation with respects to tools and procedures.Document breakdowns and produce maintenance notifications with all required information.Keep all equipment, office, warehouse and plant areas clean. Execute all required lubrication including oil and oil filter changes.Execute periodic calibration on instrumentation, including scales, probes, feeders, etc.Follow up and review work done by contractors including preventative maintenance routines (PMRs) Assist with and monitor the safe and controlled stopping and starting of major equipment.Ensure clear and complete exchanges of information with preceding and succeeding Plant Maintenance, Operators, and Dispatchers regarding operating conditions and issues encountered during shift at Shift Handover Meeting.Provide required information for spare parts purchasing and perform physical inventory as needed. Ensure any special tools and equipment required for a maintenance activity are returned in a timely fashion and in good condition.Perform other duties and activities as assigned Proactively manage health & safety of employees to continuously improve the company's health & safety performance What we are looking for High School Diploma is requiredPrevious heavy industrial maintenance experience requiredKnowledge of different types of bearing (application) in rotating equipment is essentialAbility to perform all technical aspects of the job by using all tools or systems required to perform the work. (MIG and ARN welders, cutting torch, plasma cutter, micrometers and calipers; Hoisting and rigging equipment, hand tools, hydraulic jacks)Ability to read, write, and comprehend simple correspondenceAbility to work different shifts, holidays and/or overtime as requiredAbility to solve practical problems and follow a variety of instructions in written, oral, diagram or schedule form Automotive knowledge, repair and troubleshooting skills a plus Physical Requirements Sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please. Heidelberg Materials is a drug free workplace. Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

2730 Route 130 N, Cranbury, NJ 08512-3149AUTOMOTIVE TECHNICIAN / MECHANIC Industry-leading Pay PLUS Bonuses & Great Benefits! Previous Auto Mechanic & Shop experience required.Cranbury Buick GMC is HIRING NOW for motivated Service Technicians of all skill levels to perform vehicle repairs and routine service/maintenance according to skill and certifications.We welcome Technicians from other brands and industries such as: Firestone, Pep Boys, Jiffy Lube, Midas, Valvoline, etc.This is an outstanding opportunity to start a rewarding career at a great place to work. We have knowledgeable service advisors and flexible schedules with 40 hours a week guaranteed. If you have outstanding customer satisfaction skills, are self-motivated and driven, and ready to take the next step in your career – We want to hear from you! Apply today!We offer:Industry-leading Pay up to $47 /hour! Tell us about your experience at your interview!Performance Bonuses! Opportunity to earn $50,000 - $120,000+ a year!Up to $5,000 Sign-on Bonus based on skill level and certificationsContinued, PAID training & GM certification programs provided for all techs!6-day rotation & 40 hours of work a week guaranteed!Medical, Dental & Vision InsuranceCareer advancement opportunities – Grow and advance with us!Responsibilities - Service Technician / Mechanic:Inspect vehicle and diagnose the problem(s)Perform quality repair/maintenance work that meets dealership and manufacturer standards including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc.Provide an estimate of time and parts needed for repair/maintenanceLearn new technical information and techniques in training sessions to stay current with rapidly changing technology.Keep shop neat and account for dealership owned toolsOther duties may be assigned according to skill level and certificationQualifications - Service Technician / Mechanic:Previous experience as an auto technician is requiredAuto shop or dealership experience requiredGM & ASE Certified is a huge plus!We welcome Technicians from other brands!Valid driver's license with an acceptable driving recordFlexible and focused on maintaining a high level of customer serviceGood work ethic and problem-solving skillsA positive attitude and works well as part of a teamPlease upload your resume. Completing the online assessment will grant you priority consideration!Must be authorized to work in the U.S. without sponsorship and be a current residentApplicants must pass pre-employment screeningWe are a Drug-Free WorkplaceAbout Us: Cranbury Buick GMC is the fastest-growing GM dealership in the area. When you put your talent toward this industry, you deserve to get just as much as you give. Our supportive management team recognizes, appreciates, and rewards your skill and good work, and will mentor you to advance your career! Take advantage of this opportunity to join our team and apply online today.We are an Equal Opportunity Employer. All qualified applicants are considered regardless of ethnicity, nationality, gender, veteran or disability status, religion, age, gender orientation, or other protected status.

99 South Black Horse Pike, Runnemede, NJ 08078Automotive Service Technician / Mechanic Top Techs Earn $100,000 Plus!$2,500 Sign-on Bonus for A and B Level Techs!Shop averaging 650 hours per week!Hiring now for Technicians of All LevelsLooking for Techs from New Jersey, Philadelphia or DelawareWork with the best brand in the business!Tool RelocationFlat Rate PayEarn the Money you Deserve!40-hour Guarantee. Every Other Saturday!If You Do Not have Service Tech Experience,Please Do Not ApplyWalk-in Applicants are Welcome!Business is booming! Now is the perfect time to continue your Automotive Service Technician career with Toyota of Runnemede!Come join us in our state-of-the-art facility. We need Service Techs of all levels. This rewarding opportunity won't last long - apply today!At Toyota of Runnemede, we have a strong and committed sales staff with many years of experience satisfying our customers’ needs. We treat the needs of each individual customer with paramount concern.We believe culture makes a difference and we strive to build lasting relationships with our employees, customers, and the community. We value our employees and invest in their success and offer the most competitive and aggressive pay plan in the area!We offer: Competitive pay plan$2,500 Sign-on Bonus for A and B Level Techs!40-hour guarantee. Every other Saturday!Shop averaging 650 hours per week!Medical and Dental insurance availableTool relocationFlat Rate PayPerformance-based bonusesClimate controlled shop401(k)Paid vacation and holidaysStrong “team-work” environmentResponsibilities - Service Technician:Communicate with customers and/or service advisors for a description of vehicle problems, discuss work to be performed, and any anticipated future repairs.Repair / service all vehicle systems such as brakes, A/C, tires, transmission, engine, oil changes, fluid flushes, warranty work, and recalls.Test and adjust required systems to meet manufacturers' performance specifications.Test-drive vehicles, test components, and systems.Keep training up to date.Keep abreast of the federal, state, and local regulations that affect operations; comply with hazardous waste disposal and OSHA Right-to-Know regulations; provide necessary training on these regulations and ethical practices.Be prepared to work extended hours when necessary to achieve goals.Qualifications/Requirements - Service Technician:Experience requiredLocal applicants onlyMust have own toolsMust be able to use a variety of computerized systemsMust hold a valid driver's license.Team-oriented, flexible and focused on maintaining a high level of customer service.Computer skillsUphold the highest ethical standardsUpload resume and complete online assessment for immediate considerationApplicants must pass pre-employment testing to include background checks, MVR, and drug screening.We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Responsibilities: Work with little to no supervisionClean and lubricate shafts, bearing, gears, and other parts of machineryTroubleshoot/repair machinery such as slitters, collectors, high speed welders, conveyors, and palletizersInstall and maintain pipe systems, hydraulic and pneumatic equipmentRepair and replace gauges, valves, pressure regulators, and other related equipmentBuilding maintenance including minor plumbing, welding, and general upkeepRepair and assess electrical issues as they ariseAble to familiarize yourself with our CMMS system and log labor/parts according to established expectationsMust be willing to work overtime, including weekends and off-shifts as requiredMust participate in on-call program and may be required to work additional hours on off shift due to on-call programUnderstands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent – Technical degree in maintenance-related field preferred2 years minimum experience as a maintenance mechanic in metal manufacturing environment with the ability to troubleshoot preferred but not requiredKnowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturingPLC experience preferredExperience with and ability to use all types of welding, cutting, machine, and hand tools preferredExperience in high speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Forklift Operator - Overnights - Entry LevelPay from $27 to $34 per hour - That's up to $67,000 - $85,000 per year with bonuses!Pennsylvania Distribution Center8449 Congdon Hill Drive, Alburtis, PA 18011Accuracy. Efficiency. Safety. Join Uline's all-star Distribution Center team as an Overnight shift Forklift Operator! In this entry-level role, you’ll receive on-the-job training and certifications to load and unload shipments with care. We continue to grow as North America's top distributor of shipping, industrial and packaging materials, creating new career opportunities and job stability you can count on!Hours:Sunday - Thursday, 8:30 PM to 5 AM.Position ResponsibilitiesUnload shipments from suppliers, verifying order accuracy.Load trailers with product for delivery to branches.Manage stock and inventory control.Minimum RequirementsHigh school diploma or equivalent.Frequently move packages weighing up to 70 lbs.Excellent attention to detail and time management skills.BenefitsComplete medical, dental, vision and life insurance coverage, Flexible Spending Accounts and wellness programs.401(k) with 6% employer match.Paid holidays and generous paid time off.Tuition Assistance Program that covers professional continuing education.Bonus programs that include annual performance, sales goals and profit sharing.Employee PerksBest-in-class, clean, modern facilities.Company-provided uniforms.About UlineUline is North America's leading distributor of shipping, industrial and packaging materials. We're a family-owned company known for incredible service, quality products and same-day shipping of our huge in-stock inventory. With over 9,000 employees across 13 locations, it's time you joined Uline.Uline is proud to operate as adrug-free workplace.EEO/AA Employer/Vet/Disabled#LI-TF2#LI-PA001(#IN-ECDCWH)

This position is responsible for spray equipment (e.g. airless, conventional, electrostatic, pressure washers) at the store or at customers’ job sites. This includes performing necessary repairs, providing training on equipment, and maintaining inventory as required. Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! What is the Process to get Started Step 1 – Online Application Find the role(s) that interest you on our Careers page: https://jobsearch.sherwin.com/ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Support the sales efforts at a Sherwin-Williams paint store, servicing wholesale and retail customers.Perform repairs on all types of spray equipment (e.g. airless, conventional, electrostatic, pressure washers.) at the store or at customers’ job sitesConduct hydraulic and warranty repairsRebuild pumpsRepair branch tinting and mixing equipmentEducate other employees and customers on spray equipmentMaintain an inventory of spray partsMinimum Requirements: Must be at least eighteen (18) years of ageMust be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the futureMust be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasionMust be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation Preferred Qualifications: Have a valid, unrestricted Driver’s LicenseHave at least a High School diploma or GEDHave prior work experience repairing spray and/or hydraulic pumps and equipmentHave at least one (1) year experience working in a delivery, retail, or customer service positionHave previous work experience selling paint and paint related productsHave previous work experience operating tinting and mixing equipmentAbility to read, write, comprehend, and communicate in more than one languageAbility to read, write, comprehend, and communicate in Spanish

The pay range per hour is $36.50 - $40.50Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Job DescriptionEngineering & Facilities (MT2)About job:Tuition Reimbursement programBenefits eligible after two weeks of employmentCurrently hiring for below shifts:L2 Key - Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential) About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and suppliesCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingTuition reimbursementGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doThe HVAC Service Sales Rep is critical to the overall growth and profitability of the HVAC Service business! The chosen candidate will be responsible for initiating, establishing, and building profitable service relationships between new customers and JCI. Focus on selling renewable maintenance agreements as the key building block for establishing these relationships. The salesperson will work within an assigned geographic territory, working as part of a local branch office and teaming with sales and operations professionals within the branch. Uses sales tools to plan and document sales progress as well as increase business opportunity in current accounts. Expected to obtain and close business on a monthly basis. How you will do it Follows a disciplined and professional process to identify, target and qualify prospective new customers; takes advantage of market conditions and networks effectively to uncover new leads and contacts. Contacts prospective customers and schedules appointments. Builds a referral network to identify new customers.Conducts sales calls designed to identify key sources of problems and/or dissatisfaction confronting Facility Directors in operating and maintaining heating/cooling, ventilation and control system equipment.Develops a sense of urgency to resolve needs and positions Johnson Controls as the supplier of choice. Proposes solutions to prospective customers needs through creative and innovative application of local branch service capabilities with a focus on selling renewable maintenance agreements with an emphasis on digital service offerings, sustainability, and decarbonization. Understands the customer's business and speaks their language.Reviews and finalizes proposals with prospects and secures their commitment to the Johnson Controls solution.Conducts customer kick-off meetings, resolves customer issues, creates pull-through opportunities, maintains service agreements, extends service agreements and supports the collections process.Keeps management informed of progress and account status using the Johnson Controls Salesforce.com tool and other means. Knows when to call for assistance from management to keep the sales process moving.Develops and implements territory marketing plans consistent with the Johnson Controls Building Solutions business strategy. Attends and presents at trade shows. Participates in professional organizations.Represents Johnson Controls professionally by conducting business according to the highest standards of quality, pride, integrity, and performance. What we look forRequired:2-3 previous progressive sales roles Preferred:Aptitude for technical knowledge with high level of attention to detail Enviable presentation skills complete with the ability to captivate in both individual and group communications. Selling of "service" and intangibles Exposure to sales methodologies, standards, and disciplines. Bonus Qualifications Knowledge of Building HVAC Systems Knowledge and experience in SalesForce.com Post-secondary education#SalesHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more. PRIMARY PURPOSE OF POSITIONPerforms advanced engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses superior knowledge in functional discipline and its practical application and has excellent knowledge of applicable industry codes and regulations. Functions with recognized industry-level of expertise in a technical area.PRIMARY DUTIES AND ACCOUNTABILITIESPerform advanced engineering and technical tasks in support of nuclear plant operations.Perform independent research, reviews, studies and analyses in support of technical projects.Provides in-depth technical expertise to develop, manage and implement engineering activities related to plant safety, reliability, maintainability, and availability ensuring compliance to customer's needs, regulatory requirements, and corporate policies.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices and codes are used in preparation of plans and specifications.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provides initial or complete task management of engineering issues.Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.Supports plant design modifications, testing and problem solving.Assure all engineering products prepared or overseen are in accordance with applicable safety analyses, industry codes, and all regulatory requirements.Develop, implement and coordinate functional supervisory activities including, but not limited to, personnel, budgetary accountabilities and planning goals with respect to engineering personnel.*This Engineering role can be filled at Mid, Senior or Senior Staff Engineer levels. Please see minimum qualifications list below for each level*Expected salary range:Mid-level: $ 88,000 - 108,000Senior Level: $ 115,000 - 141,000Senior Staff Level: $ 138,000 - 154,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.MINIMUM QUALIFICATIONS for Mid-level EngineerB.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior EngineerB.S. in Engineering or Licensed Professional Engineer and 7+ years engineering experienceMINIMUM QUALIFICATIONS for Senior Staff EngineerB.S. in Engineering or Licensed Professional Engineer and 10+ years engineering experience PREFERRED QUALIFICATIONSSteam Turbine exerience required. preferablly a focus on turbine field engineering and maintenance support, and troubleshooting. Experience with turbine overhauls, inspections, long term assett management, professional engineering registration is a benefit but not required, and advanced technical degree or coursework is beneficial.

AutoReqId: 19609BR Pay Class: Hourly Hourly Pay Rate: 28.47 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials is seeking a 2nd shiftPlant Maintenance Mechanic for our Downingtown facility located in Downingtown, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications.Work in all areas of the plant as neededEnsure compliance with all health, safety and environmental regulations, and with company policies and procedures; perform daily equipment inspections, as well as identify and assist in correcting unsafe conditions Here's what we're looking for High School Diploma or equivalent requiredPrevious experience in open pit mining operations and aggregate products a plus.Ability to work different shifts, holidays and/or overtime as required.MSHA part 48 training a plus.Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below the shoulder, work extended periods of time in the same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 50 lbs., working confined spaces, capable of wearing respiratory and other personal protective equipment. No Search Firms Please. Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Responsibilities: Work with little to no supervisionClean and lubricate shafts, bearing, gears, and other parts of machineryTroubleshoot/repair machinery such as slitters, collectors, high speed welders, conveyors, and palletizersInstall and maintain pipe systems, hydraulic and pneumatic equipmentRepair and replace gauges, valves, pressure regulators, and other related equipmentBuilding maintenance including minor plumbing, welding, and general upkeepRepair and assess electrical issues as they ariseAble to familiarize yourself with our CMMS system and log labor/parts according to established expectationsMust be willing to work overtime, including weekends and off-shifts as requiredMust participate in on-call program and may be required to work additional hours on off shift due to on-call programUnderstands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent – Technical degree in maintenance-related field preferred2 years minimum experience as a maintenance mechanic in metal manufacturing environment with the ability to troubleshoot preferred but not requiredKnowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturingPLC experience preferredExperience with and ability to use all types of welding, cutting, machine, and hand tools preferredExperience in high speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 20449BR Pay Class: Hourly Hourly Pay Rate: 27.44 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials is seeking a Mobile Fleet Mechanic Trainee for our Penns Park facility located in Newtown, Pennsylvania. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Perform repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment components.Maintain proper tool/parts inventory for specified jobs.Rebuild trucks or other motorized equipment engines and component parts.Complete maintenance projects in a timely manner to ensure production goals.Maintain up to date written or data input spreadsheets on all equipment repairs.Ensure that all equipment repairs are performed accurately to the manufacturer standards.Performs other miscellaneous mechanical and maintenance duties as assigned. What We Are Looking For Prior maintenance experience preferred on heavy mobile equipmentWelding experience desiredOpen pit mining operations and aggregate products experienceFrequently lift 25 pounds; occasionally lift up to 70 pounds.MSHA training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

What you will doJohnson Controls Inc is looking for forward-thinking talent to join our growing organization. During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant building automation technologies in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.Are you looking to gain Heating, Ventilation, & Air Condition (HVAC) knowledge and learn firsthand from industry leading professionals Our team will give you this opportunity, in addition, we provide factory certification through our Service Technical Academy (STA). We will equip you with tools and a vehicle to perform your job at the highest standard.Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do itApprentices will be trained and will perform on HVAC mechanical equipment and controls on client sites.Apprentices will participate in certified trainings through Service Technical Academy that will build skill sets to provide continued opportunities for recognition, monetary rewards and advancement.Through coaching and mentorship, apprentices will develop skills to troubleshoot and resolve both technical issues as well as customer needs.You will keep JCI, contractors, and the customer advised of job progress and issues as needed.You will meet attendance requirements for required Union training for first year.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.This is a Bargaining Union PositionWhat we look for 1+ years of industry experience or experience in servicing mechanical systems in the HVAC industry.Generally required knowledge includes mechanical HVAC systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniquesEffective interpersonal skills to properly represent Johnson Controls to customers and other outside contacts in an ethical and professional manner.Leadership skills to support the activities of Mechanics working on non-complex, non-critical mechanical HVAC equipment on a job siteSelf-starter with ability to eventually work independently.Prioritize safety in all forms.This position requires a valid driver’s license.Preferred1-2 years of trade school or college in a technical emphasis.*This is a Bargaining Unit Position.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Responsibilities: Work with little to no supervisionClean and lubricate shafts, bearing, gears, and other parts of machineryTroubleshoot/repair machinery such as slitters, collectors, high speed welders, conveyors, and palletizersInstall and maintain pipe systems, hydraulic and pneumatic equipmentRepair and replace gauges, valves, pressure regulators, and other related equipmentBuilding maintenance including minor plumbing, welding, and general upkeepRepair and assess electrical issues as they ariseAble to familiarize yourself with our CMMS system and log labor/parts according to established expectationsMust be willing to work overtime, including weekends and off-shifts as requiredMust participate in on-call program and may be required to work additional hours on off shift due to on-call programUnderstands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent – Technical degree in maintenance-related field preferred2 years minimum experience as a maintenance mechanic in metal manufacturing environment with the ability to troubleshoot preferred but not requiredKnowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturingPLC experience preferredExperience with and ability to use all types of welding, cutting, machine, and hand tools preferredExperience in high speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

ENSURING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctionsContact customer representative and ascertain equipment/systems problemsDiagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sitesFollow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipmentService, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnellRead and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manualsExhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfactionComplete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computersObtain customer signature upon completed service call assignmentParticipate in a scheduled On-call rotationHelp to train or mentor others on the service teamProvide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of servicePerform other duties as assignedHow you will do it:This skilled position involves troubling shooting and repairing installed systems. Including panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testing.Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks.Candidate must possess excellent written/verbal communication and outstanding customer service skills.Position involves the programming of fire alarm, security, and access control system panels.Experience CCTV and IT and IP networks a plus.Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner.On call and after hours work required on occasion at customer need.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look for:Required5+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems.NICET ll Level II certification - PreferredExperience in reading and interpreting blueprints, submittals, and operational/product manuals.Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.High School Diploma or equivalentAbility to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etcAbility to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Retain any licenses that are required by National, State and Local codes.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Responsibilities: Work with little to no supervisionClean and lubricate shafts, bearing, gears, and other parts of machineryTroubleshoot/repair machinery such as slitters, collectors, high speed welders, conveyors, and palletizersInstall and maintain pipe systems, hydraulic and pneumatic equipmentRepair and replace gauges, valves, pressure regulators, and other related equipmentBuilding maintenance including minor plumbing, welding, and general upkeepRepair and assess electrical issues as they ariseAble to familiarize yourself with our CMMS system and log labor/parts according to established expectationsMust be willing to work overtime, including weekends and off-shifts as requiredMust participate in on-call program and may be required to work additional hours on off shift due to on-call programUnderstands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent – Technical degree in maintenance-related field preferred2 years minimum experience as a maintenance mechanic in metal manufacturing environment with the ability to troubleshoot preferred but not requiredKnowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturingPLC experience preferredExperience with and ability to use all types of welding, cutting, machine, and hand tools preferredExperience in high speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:• Competitive Starting Pay• Paid Training• Global Advancement Opportunities• Company Vehicle (as applicable)• Referral Bonuses• Comprehensive Benefits• Medical/Dental/Vision insurance• Health Savings Account (HSA)• Life Insurance• 401(k) savings plan with company match• Short-Term and Long-Term Disability• Employee Assistance Program• Wellness Program• And More!What you will do:Service and troubleshoot wet/dry/ pre-action systems, fire pumps-based fire sprinkler systems, and backflows, including repair and internal inspections of systems.Follow verbal and written instructions, read and understand complex construction blueprints, diagrams, and specifications used in installation activities.Carry/move equipment and tools weighing up to 60 pounds. Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet or more.Maintain a clean and safe work area. Pick up and properly dispose of all trash associated with Johnson Controls Fire Protection work. Wear appropriate safety equipment as required including bump cap/hard hat, safety glasses, cut resistant gloves, face mask and safety toed boots.Properly secure all Johnson Controls Fire Protection tools and equipment at the end of each work period so as to prevent damage or loss.Have computer/phone skills - Word, Excel, Outlook and IPhone apps and functionsComplete and submit time reports and other documents as required.Bring to the immediate attention of the dispatcher/supervisor all changes, discrepancies and coordination problems that impair activities or schedules.Working alternate shifts or weekends to meet customer service on call requirements is required.Perform other duties as directed.What we look for:RequiredHigh School Diploma, or equivalentWorking knowledge of wet, dry and pre-action sprinkler systems, and fire pump systems a must.Must have a clean driving record.Follow verbal and written instructions3-5 years of experience in the industry.PreferredSprinkler and Backflow license a plus or must be obtained.NICET is a plus.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Position Summary: The production line mechanic will be responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. This role involves applying mechanical expertise in determining work methods and procedures for producing quality product. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Responsibilities: Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assigned Requirements: High School Diploma or GED3-5 years’ experience in a maintenance of Injection Molding Presses within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties Physical Demands: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, couch or crawl; and talk or hear. The employee must occasionally lift up to 50 lbs. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Do you have HVAC experience We are looking forHVAC systems servicemanwho have worked in residential, light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrialcutting-edgeequipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology,equipment,and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.What you will do:We are looking foraSkilledHVAC Systems Serviceman who have worked in residential, light commercial and/or heavy commercial markets to join our team to work the most advanced heavy commercial and industrialcutting-edgeequipment.How will you do it:We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology,equipment,and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Servicemen must have practical working experience in residential, light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination as to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems.Perform maintenance, repair and replacement services on commercial heating and cooling systems.What we look for:RequiredHigh School Diploma or equivalent.Two (2) years Commercial and/or industrial, mechanical troubleshootingexperiencein the HVAC industry.Ability to commit to a30-Hour OSHA Certificationwhich is to be done after hours and weekends is requiredupon hire.Computer savvy with good verbal and written communication skills.PreferredFive (5) years of Commercial and or industrial work experiencein the HVAC industryRefrigeration Certification preferredEPA Universal Refrigerant Certification*This is a Bargaining Unit Position.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

What we offer:Competitive Starting PayHealth Savings Account (HSA)Tuition ReimbursementPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceLife Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Fire Suppression systems and product lines as well as similar competitive manufacturers’ product lines.How you will do it:Work with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredFire alarm license and able to obtain and retain any licenses that are required by National, State and Local codes.3 years' experience for this role documented service experience in fire alarm or fire sprinkler.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.PreferredNICET certification Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.