Description Heavy Diesel Mechanic $28-$32 per hour based on experience and qualifications! Job Purpose: This position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to Transdev standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. Responsibilities: Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components.Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs.Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliersAssist Tech III with preventative maintenance (PM’s), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usageRemove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision.Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision.Notify supervisor of potentially dangerous equipment and corrective action takenEvaluates completed work prior to release and seeks approval where requiredAssist with road calls and emergency services as necessaryAdhere to Transdev standards, policies and proceduresMoves vehicles safely between job and work areaRepair and maintain all shop equipmentCleans vehicles as requested or requiredOther responsibility as requested or required Education: High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred)Class B CDL with passenger endorsement required (or expected within 3 months of hire)State inspection license (if required)ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Experience: Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experienceAdhere to standards set by state DOT for motor vehicle inspections and safety standardsValid driver’s licenseIntermediate problem-solving abilityIntermediate computer skillsComfortable using hand toolsStrong customer service skills and communication skillsAbility to work independently as well as part of a teamMaintain an organized shop and clean work environmentRegular, predictable, full attendance is an essential function of the jobMaking sure vehicles are maintained and safe for our customersPossess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements & Working Conditions: Maintenance Shop environment with dust, dirt and grease conditionsAbility to work under all weather conditionsAbility to lift a minimum of 50 poundsAbility to work in a crouched position or on back, lying on mechanic’s creeper, beneath motor vehicle equipment Disclaimer: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management’s assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. This position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to Transdev standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status or any other classification protected by federal, state, or local law.

Forbes List of America's Best Employers 2022, 2023, & 2024 Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible. ***Now Offering $3,000 Signing Bonuses for all new Servicepersons*** $6,000 Signing Bonusfor CDL A or B License Holders (must have air brake and passenger endorsement) at time of hire Summary: New Jersey Transit may have openings at any of the following Locations: Nutley, Jersey City, Maplewood, Newark, Orange, Fairview, Paterson, North Bergen, Oradell, Wayne, or Westwood. Under the direction of the Superintendent or General Foreman, a Bus Serviceperson is responsible for checking and maintaining of all NJ TRANSITbuses for daily services. Report any damages or repairs needed as directed by the supervisor. Roles and Responsibilities: Check bus fluids and maintain required levelsChange fluidsClean inside and around busesShift and drive buses in and around the garageSteam enginesChange tires (utilizing the appropriate equipment)Complete forms required in carrying out duties of the position Training: NJ TRANSIT’s Maintenance Department offers a six (6) day, comprehensive job-related training for all new Servicepersons at our Training Facility in Newark, NJ. NJ TRANIST’s Bus Operational Training Department offers up to 30 days of classroom instruction to assist new Serviceperson hires with obtaining a NJ Commercial Learner’s Permit, which is an essential requirement of the Serviceperson position. In order to have sucessful job placement and continued employment with NJ TRANSIT as a Serviceperson: Upon receiving an offer, youmust purchase an CDL Permit Examination Ticket at a NJ MVC location, and complete the IdentoGo fingerprinting process prior to startingAll new hiresmust obtain a Commercial Learner’s Permit (CLP) valid in the state of New Jersey within thirty (30) days of their start date.A Serviceperson must successfully complete both bus maintenance and bus operational training, including the receipt of a Class A/B Commercial Driver License valid in the state of New Jersey with a passenger endorsement and no disqualifying restrictions. Education, Experience, and Qualifications: Light professional mechanical experience preferred;diesel experience a plus but not requiredBe twenty-one years (21) years of agePossess a valid NJ Driver’s License with three (3) years of driving experienceMust be eligible to obtain a Commercial Driver’s License (CDL) with passenger endorsementorpossess a valid NY/PA CDL with Passenger and Airbrake endorsement***Be able to work any shift in keeping with seniority-based scheduling. Hours vary depending upon the Bus Garage.Be able to pass the pre-employment physical and background checksHave a good driving record with less than five (5) points At NJ TRANSIT you will enjoy a competitive salary and excellent benefit package! $6,000 Signing Bonusfor CDL A or B License Holders (must have air brake and passenger endorsement) at time of hire*$3,000 Signing Bonusfor all newly hired Servicepersons*Full benefit package including medical, prescription, dental & visionPension plan plus 457 tax-deferred savings plan (lifetime benefit)Growth OpportunitiesPaid time offAssistance obtaining your CDL (for NJ drivers only)Salary: $19.49 At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST *Terms and Conditions Apply. This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations.The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. Code:INDBU1

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.ReadyRefresh brings hydration that supports a healthy lifestyle, and convenience that preserves precious time and sustainability to help improve our world. Our ReadyRefresh branches and warehouses are where our iconic brands begin their journey to the customer.Job DescriptionJoin our Fleet Technician team in Jersey City, NJ. Limited openings available for this highly sought-after position.The Master Fleet Technician’s primary purpose will require the individual to perform preventative and corrective maintenance on fleet vehicles and equipment including gas and diesel engines, hydraulic systems, air brakes, and forklifts.GREAT PAY – $36.00 / hour (based on qualifications) SHIFT DIFFERENTIAL – 6%-8% of base hourly rate shift differential paid for applicable hours worked $5000 SIGN ON BONUS – Payable in two payments GROWTH AND STABILITY – Our Deer Park Water has been hydrating NJ communities since 1873 $1500 EMPLOYEE REFERRAL BONUSES – Unlimited!Our Benefits Package 401(k) matching; AD&D insurance; Uniform Allowance; Dental insurance; Disability insurance; Employee assistance program; Employee discounts and perks; Health insurance; Health savings account; Life insurance; Paid orientation; Paid time off; Paid training; Paid vacation; Prescription drug insurance; Safety equipment provided; Vision insuranceSchedule: Monday – Friday, Full-TimeShift: 2:00 PM – 10:30 PM – Other shifts will be considered based on business needsSkills Required: • Troubleshoot and repair fleet vehicles and equipment to include planned preventive maintenance, warranty repair, and other scheduled services. • Program and record all repair work in Trimble TMT electronic maintenance system and on company PM Cards • Electronically bill out parts in Trimble TMT Fleet software or company proprietary systems. • Ensure planned preventive maintenance, warranty repair, and other scheduled services are completed daily • Assist in education of the Route Sales Representatives’ pre and post-trip inspections • Adhere to all department policies and procedures; track all required documentation • Maintain work area ensuring organization and cleanliness • Ensure company safe work practices are always followed • Oversee Fleet Technicians and provide direction as assigned by Lead Technician • Help schedule and support all work within the shop, including trainings • Ensure DOT and Safety, Health, and Environmental compliance standards are metQualificationsRequirements/Qualifications: • Minimum five years hands-on experience in commercial fleet repair (gas, diesel or propane accepted) • High school diploma, GED, or equivalent work experience • Accredited vocational / trade school certification preferred • Ability to handle physical requirements, including, but not limited to, repeated bending, stretching, twisting, and lifting up to 60 pounds in all work conditions (indoor and outdoor), with or without a reasonable accommodation • A valid driver’s license and acceptable driving record • Ability to secure and maintain a CDL Class B with airbrake endorsement within specified period • Ability to secure and maintain T4 (airbrake) certification within specified period • Must possess mechanic hand-tools and toolbox for secure storage • Self-motivated and capable of working independently without direct supervision • Proficient with Microsoft Office programs, Electronic Diagnostic Tools, and Electronic Maintenance Database applications • Strong customer service and communication skillsBlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

Dreaming big is in our DNA. It’s who we are as a company. It’s our culture. It’s our heritage. And more than ever, it’s our future. A future where we’re always looking forward. Always serving up new ways to meet life’s moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together – when we combine your strengths with ours – is unstoppable. Are you ready to join a team that dreams as big as you do SALARY:$30.88 per hour averaged($26.47 base rate for first 8 hours; next 4.25 hours paid at 1.5 rate of $39.70)SHIFT:Willingness to work rotating shifts required (days, afternoons, midnights).COMPANY:Budweiser. Bud Light. Stella Artois. Michelob ULTRA. That’s right, over 100 of America’s most loved brands, to be exact. But there’s so much more to us than our top-notch portfolio of beers, seltzers, and more. We believe our people are our greatest asset, and we’re looking for people like you to join our shared dream and purpose. We dream big to create a future with more cheers.JOB RESPONSIBILITIES:Operate and maintain washers, wastewater treatment, close loop systems, cooling towers, and bulk storage to full operating potential and other duties as required.Perform mandatory sampling requirements and preventative maintenance tasksAssist with environmental tasks as needed.Promote process improvement through root cause analysis and completing actions to prevent reoccurrence.Provides coaching, troubleshooting, and training to other CPO’s and Team Members.JOB QUALIFICATIONS:Working knowledge of Basic Mechanics and aligning gear-box motors and drivesTroubleshooting and problem-solving abilitiesWorking knowledge of pumps and piping. (How to rebuild and repair)Must attend Hazardous Waste, DOT and Wastewater Treatment training courses.Must be able to obtain a Pesticide Applicator’s license.Experience performing basic chemical lab procedures, i.e. pH measurements acid and base titrations (preferred).Technical knowledge of chemicals and Wastewater Treatment Operations (preferred).Knowledge of environmental reporting procedures and awareness of wastewater permit requirements (preferred).Former use of SAP (preferred)WHY ANHEUSER-BUSCH:Anheuser-Busch has always dreamed big. It’s who we are as a company. It’s our culture. It’s our heritage. But more than ever, it’s our future. A future where we’re always looking forward. Always serving up new ways to meet life’s moments. Even when they’re hard. A future where we keep dreaming bigger. Together. To reimagine what a beer company can be. And what Anheuser-Busch can do. Where we provide more opportunity for our people, lift up our neighbors, and make a meaningful difference in the world. This future is our purpose. A future that everyone can celebrate, and everyone can share in. A future with more cheers.BENEFITS:Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending AccountsLife Insurance and Disability Income ProtectionGenerous Parental Leave and FMLA policies401(k) Retirement Savings options with a company matching contributionChance to work in a fast-paced environment among a company of ownersFree Beer!#AC-3

$26.00/hourUp to $1,250 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you ! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, d ental and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving recordAt least 2 year s of auto repair experience or coursework with automotive certifications1 ASE certificat ion (ability to acquire 2 additional ASE certificat ions within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage ! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group . NewarkNew JerseyUnited States of America

Clean Harbors in South Plainfield, NJ is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementKey Responsibilities:Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsRequired Qualifications:Valid Driver’s licenseReliable transportationAbility to perform physical functions per Key ResponsibilitiesThis position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs.Perform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.Preferred Qualifications:Previous relevant labor experienceClean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH

Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience.Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Diesel Mechanic C-3 Full-time Location: Chester, NY Compensation: $27.13 up to $30.88 per hour based on experience Apply now!Coach USA has new and exciting career opportunities for Diesel Mechanics at our Chester, NY location. We are looking for a mechanic to repair and inspect company equipment in a cost effective, safe, timely manner. Come join our growing team!What We Offer: Competitive wages based upon experience and certificationsExcellent benefits package (medical, dental, vision, short term disability, AFLAC),401KCompany paid Life insuranceUniform providedTool/Boot Allowance annuallyPaid Weekly/Direct DepositVacation/10 Paid Holidays/PTO/Floating Holidays/BirthdayUnion ShopEmployee Referral ProgramTickets at WorkPerfect Attendance $100 (every 6 months)Garage Kept Buses Responsibilities: Inspects, repairs, or replaces parts including: Air Compressors, pumps, filter units, superchargers, starters, timers, generators, governors, reduction gears, hydraulic couplings, braking systems, steering systems, cooling systems, electrical systems, and air conditioningRemove and replace Broken Glass, Body Components and Seat CoversMinor body work as neededPMI repairsUtilize most special purpose shop tools, such as steam cleaners, grease guns, valve grinders, etc.Performs other duties as directed, including all work subordinates perform Qualifications: High School Diploma or GED preferredBe able to work in all types of weather conditions, including outdoorsMust meet DOT Physical Qualifications, pass pre-employment drug screen and background checkCDL A/B with Passenger and Air Brake EndorsementMust be able to attend training when directed To learn more about your next big career change, APPLY NOW!Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class.

What you will do Johnson Controls Inc. is looking for forward-thinking talent to join our growing organization. During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners and the communities we serve. At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant building automation technologies in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun. We are looking for skilled mechanic who has experience with air cooled or water-cooled machines to work with top of the line commercial and industrial equipment. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look for Required Must be a member or willing to join the local Union. Minimum of 3 years of practical working experience on air cooled or water-cooled machines with strong HVAC/ mechanical troubleshooting experience. You may be required to pass a knowledge examination to assess proficiencies. Attention to detail through interpersonal, digital, and written skills. Self-starter with a passion/ desire to learn and apply on the job. Prioritize safety in all forms Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license Pay Range: $45.23 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Responsibilities and DutiesBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMeets D.O.T requirements required by job assignmentMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/B or A Commercial Driver's License (CDL) - REQUIREDDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $30.71 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Move forward with us! At NJ TRANSIT Mercer, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible. Location:Neptune Garage Roles and Responsibilities: Adjust and reline air and hydraulic brakes, align wheels, tighten bolts and screws, and reassemble equipmentAttach test instruments to equipment and read dials and gauges to diagnose malfunctionsMust be qualified to disassemble and overhaul internal combustion engines, pumps, generators, transmissions, clutches, and differential unitsInspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditionInspect, repair, and maintain automotive and mechanical equipment and machinery such as pumps and compressorsInspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, and pressure gaugesPerform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machineryMust be qualified to install or rebuild diesel enginesRecondition and replace parts, pistons, bearings, gears, and valvesRepair and adjust seats, doors, and windows, and install and repair accessoriesMust be qualified to fix and maintain parts of the engine, such as fuel injection systemsExperience using hand tools and power tools as part of daily work routineOther duties as directed and or assigned, to include and to ensure the safe operation and efficiency of the department Education, Experience, and Qualifications High school diploma or equivalent (GED) required. Must be a minimum of 21 years of age.Must be able to work flexible hours.Be able to pass the pre-employment physical and background checkVarious Positions: 0 - 15 years automotive or diesel mechanicalexperience.Must be able to diagnose, troubleshoot, and repair all vehicles and equipment in service with minimal supervision.Must possess a CDL license with air brakes and a passenger endorsement or have the ability and willingness to obtain one609 air conditioning certification and at least three H or T series ASE certifications preferred At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorize the use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees.

$20.00/hourUp to $875 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are as passionate about cars as we are. Whether you have recently graduated from a tech school or worked in a manufacturing warehouse, auto garage or auto dealership, this job might be a great fit for you ! Become a member of our Avis Budget Group enterprise. What You'll Do: You will perform preventative maintenance functions and light repairs on our auto fleet of vehicles. This includes oil, fluid, tire changes, repairs , rotations, and other basic light repairs, all in a safe manner. Depending on your experience, you may be assigned to assist our experienced auto mechanics. Perks You'll Get: Bi-weekly p ay (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive or mechanical abilities , help to obtain ASE CertificatesPaid time offMedical, d ental , and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits ( 401k )Employee discounts , including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License At least 6 months auto maintenance experience (ability to acquire 1 ASE certificate within first year)Comfortable working in a mechanical shop with moderate or loud noise levelsBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States6 months auto maintenance or auto tech school degree a bonus ! Who We Are: Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. NewarkNew JerseyUnited States of America

Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience.Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

What you will do:Do you have HVAC experience We are looking for HVAC systems mechanics who have worked in light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of serviceHow will you do it:Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look for:RequiredAt least Two (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredFive (5) years of Commercial and or industrial work experience in the HVAC industryRefrigeration Certification preferredEPA Universal Refrigerant CertificationPay Range: hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Responsibilities and DutiesBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMeets D.O.T requirements required by job assignmentMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/B or A Commercial Driver's License (CDL) - REQUIREDDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $30.71 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Forbes List of America's Best Employers 2022, 2023, & 2024 Do you have at least 5 or more years of electrical experience in residential, commercial or industrial environments If so, then move forward with us! At NJ TRANSIT, you will join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe and reliable service that transports our customers to their destinations on timeand interested in hiring skilled individuals with a passion for learning to make it all possible. Mechanic B-Electricianpositions are located throughout New Jersey includingHoboken, Summary Mechanic B-Electrical Shop Electricians conduct general and specialized installation, maintenance and repair on various types of electrical equipment. Roles and Responsibilities: Must present one of the following: New Jersey Electrical License, Certificate of Completion of Apprenticeship Electrician from the NJ Department of Labor Office of ApprenticeshipORfive (5) years of electrical experience in commercial, industrial and/or residential environments.Ability to read and interpret technical documents, wiring diagrams, schematics, construction drawings, etc.Experience with troubleshooting and repairing electrical systems.Must pass New Jersey Transit’s Electrician Aptitude Test.Present a valid driver’s license andHigh School Diploma or GED.Successfully pass the pre-screening process including drug test, physical, and criminal, employer, and driving background checks. Education, Experience, and Qualifications: Installing low or medium voltage equipment, panels, motors, controls, etc.Installation, maintenance, and repair of electronic systems, PLC’s, Controllers, Computers, Alarms, PA’s, etc.Test equipment such as multi-meters, insulation testing, phasing, etc.Using and understanding code requirements, including NEC, NESC, OSHA, IEEE, NFPA, etc.Prior railroad, transportation, or military experience Physical Requirements Stoop, bend, crawl, balance, climb, kneelBe exposed to equipment that intensifies the heat factor on an occasional basisWear protective equipment such as hardhat, safety glasses, and safety-toe boots At NJ Transit you will enjoy a competitive salary and excellent benefit package: Advancement Opportunities andWage ProgressionComprehensive Family Health Insurance - Medical, Dental, Prescription,VisionFlexible Spending AccountPaid Leave andPaid Time Off (personal, sick, and vacation days)Life Insurance401(a) Retirement Plan- up to 5% match and 457-Deferred Savings PlanU.S. Railroad Retirement Benefits (RRB) At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. www.njtransit.com

$20.00/hourUp to $1,750 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are as passionate about cars as we are. Whether you have recently graduated from a tech school or worked in a manufacturing warehouse, auto garage or auto dealership, this job might be a great fit for you ! Become a member of our Avis Budget Group enterprise. What You'll Do: You will perform preventative maintenance functions and light repairs on our auto fleet of vehicles. This includes oil, fluid, tire changes, repairs , rotations, and other basic light repairs, all in a safe manner. Depending on your experience, you may be assigned to assist our experienced auto mechanics. Perks You'll Get: Bi-weekly p ay (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive or mechanical abilities , help to obtain ASE CertificatesPaid time offMedical, d ental , and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits ( 401k )Employee discounts , including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License At least 6 months auto maintenance experience (ability to acquire 1 ASE certificate within first year)Comfortable working in a mechanical shop with moderate or loud noise levelsBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States6 months auto maintenance or auto tech school degree a bonus ! Who We Are: Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. NewarkNew JerseyUnited States of America

Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience.Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

$26.00/hourUp to $2,500 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you ! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, d ental and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving recordAt least 2 year s of auto repair experience or coursework with automotive certifications1 ASE certificat ion (ability to acquire 2 additional ASE certificat ions within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage ! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group . NewarkNew JerseyUnited States of America

Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience.Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.