We are looking for an experienced Traffic Control Technician to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer Growth Potential
Qualifications: Valid Driver’s License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, gender, national origin, disability, or veteran status.

We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingRepair and maintain, in accordance with diagrams, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsWhat Are We Looking ForHigh School Diploma or equivalent requiredMaintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an excess of 40 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$29.25 per hour.Benefits through the Union for Medical, Dental, Vision, and Pension.Union paid vacation, sick leave, and holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35 - $40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

$27.00/hourUp to $10,000 Retention BonusShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. PhiladelphiaPennsylvaniaUnited States of America

Clean Harborsis seeking aTravelingField Inspector.TheField Inspectoroversees and documents daily site activities for remediation and emergency response projects. In addition, Field Inspector will be required to collect soil and groundwater samples, air monitoring data and completion of field activities. Field Inspector will work under the direct supervision of the Field Project Manager/Field Supervisor and will assist in the completion of a project. ***An exciting way to build a career with Clean Harbors using this role as a steppingstone to work through the chain of the Remediation team and ultimately into a Project Manager position while gaining the necessary skills and experience to do so. Travel 95-100% required:This position will travel 6 weeks on the road and 1-week home paid. Location: Philadelphia, PA or Chicago, IL preferred Pay:$25 an HR, OT and per diem available **Per Diem available daily, travel costs covered by the company. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5;Competitive wages;Comprehensive health benefits coverage after 30 days of full-time employment;Group 401K with company matching component;Opportunities for growth and development for all the stages of your career;Generous paid time off, company paid training and tuition reimbursement;Positive and safe work environments.Key Responsibilities:Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Accurately and completely document site activities including cost tracking, worksheets, waste shipping logs, manifest management, health and safety, documentation of meetings and conference calls and other paperwork via laptop or mobile device;Work in field with hands on labor alongside crew and Project Manager/Field Service Supervisor;Travel to different project locations including Wastewater Treatment plants, soil remediation locations, and more;Reading and understanding of project documents and contracts;Will gain 40-hour Hazwoper, OSHA 10 and possibly more certifications through the company;Learn to calibrate air monitoring meters and associated Health & Safety equipment;Work on project financial tracking and assist in various project administrative functions, including generation of required reports, etc.;Ordering and receiving supplies for projects;Possibly operate some heavy equipment.What does it take to work for Clean Harbors High School Diploma or equivalent is required;Bachelor’s degree in Environmental Science or Engineering required;Be safety orientated and have a commitment to safety;Willing to do manual labor;Willing to work outside in all kinds of weather, utilizing prescribed Personal Protective Equipment;Valid DL and clean MVR required;Should have working knowledge of Microsoft Office software and professional level written / oral communication skills. Civil Engineering / construction / survey experience a plus.40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today. To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.*CH#LI-SE1

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$25-$45 per hour DOE. Sign on Bonus: up to $3,000.00 DOEOngoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Overview: MARKET LEADING PAY, PLUS BONUSESBoardwalk Honda is part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Automotive Service Technicians/Mechanicsto join our team!Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees. We offer...Market Leading Pay, based on experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1

99 South Black Horse Pike, Runnemede, NJ 08078Automotive Service Technician / Mechanic Top Techs Earn $100,000 Plus!$2,500 Sign-on Bonus for A and B Level Techs!Shop averaging 650 hours per week!Hiring now for Technicians of All LevelsLooking for Techs from New Jersey, Philadelphia or DelawareWork with the best brand in the business!Tool RelocationFlat Rate PayEarn the Money you Deserve!40-hour Guarantee. Every Other Saturday!If You Do Not have Service Tech Experience,Please Do Not ApplyWalk-in Applicants are Welcome!Business is booming! Now is the perfect time to continue your Automotive Service Technician career with Toyota of Runnemede!Come join us in our state-of-the-art facility. We need Service Techs of all levels. This rewarding opportunity won't last long - apply today!At Toyota of Runnemede, we have a strong and committed sales staff with many years of experience satisfying our customers’ needs. We treat the needs of each individual customer with paramount concern.We believe culture makes a difference and we strive to build lasting relationships with our employees, customers, and the community. We value our employees and invest in their success and offer the most competitive and aggressive pay plan in the area!We offer: Competitive pay plan$2,500 Sign-on Bonus for A and B Level Techs!40-hour guarantee. Every other Saturday!Shop averaging 650 hours per week!Medical and Dental insurance availableTool relocationFlat Rate PayPerformance-based bonusesClimate controlled shop401(k)Paid vacation and holidaysStrong “team-work” environmentResponsibilities - Service Technician:Communicate with customers and/or service advisors for a description of vehicle problems, discuss work to be performed, and any anticipated future repairs.Repair / service all vehicle systems such as brakes, A/C, tires, transmission, engine, oil changes, fluid flushes, warranty work, and recalls.Test and adjust required systems to meet manufacturers' performance specifications.Test-drive vehicles, test components, and systems.Keep training up to date.Keep abreast of the federal, state, and local regulations that affect operations; comply with hazardous waste disposal and OSHA Right-to-Know regulations; provide necessary training on these regulations and ethical practices.Be prepared to work extended hours when necessary to achieve goals.Qualifications/Requirements - Service Technician:Experience requiredLocal applicants onlyMust have own toolsMust be able to use a variety of computerized systemsMust hold a valid driver's license.Team-oriented, flexible and focused on maintaining a high level of customer service.Computer skillsUphold the highest ethical standardsUpload resume and complete online assessment for immediate considerationApplicants must pass pre-employment testing to include background checks, MVR, and drug screening.We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

The pay range per hour is $36.50 - $40.50Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Job DescriptionEngineering & Facilities (MT2)About job:Tuition ReimbursementBenefits eligible within two weeks of employmentCurrently hiring for below shifts:L2 Key - Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential)L3 Key - Wednesday - Saturday from 10:00pm - 8:00am ($2.50 shift differential) About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35 - $40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine maintenance and repairs on plant equipment.Troubleshoot mechanical issues and implement solutions.Ensure compliance with safety standards and regulations.Collaborate with team members to optimize plant operations.Maintain accurate records of maintenance activities.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Proficiency in using hand and power tools.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$29.55 per hour.Benefits through the Union for Medical, Dental, Vision and Pension.Union paid vacation, sick leave and holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: WE OFFER TOP PAY and ask about sign on bonus and relocation assistance available to highly qualified technicians.BMW of Atlantic Cityis part of Group 1 Automotive, a leader in automotive retail in sales and service and one of the fastest growing companies in the field. We arelooking forExperienced Automotive Techniciansto join our team and grow together to achieve new heights. Our Service Technicians should be passionate about providing a quality customer experience by taking pride in their work. We are a company that at its core believes in honesty and integrity and are looking for others that believe in doing the right thing.***Call Service Director directly to request an interview***Stan Martin -We offer...Market Leading Pay, Plus BonusesA Great Working Environment with the Latest EquipmentHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offStructured, Self-paced and paid Training OpportunitiesLeading to Manufacturer and Group 1 RecognitionEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramOpportunities for AdvancementReferral BonusesWe’re looking forMaster or Certified Technicians, but welcome other Experienced technicians.National Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance preferred.A passion for what you doA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsMust have a Valid Driver’s License*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*Group 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and the United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career and become part of the best company in automotive retail. Apply today or refer a qualified friend!Group1 Automotive is an Equal Employment Opportunity employer.IND1#LI-AS1PRI

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35 - $40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingAssist in the maintenance and repair of mechanical equipment.Learn and apply safety protocols and procedures.Perform routine inspections and diagnostics.Collaborate with experienced mechanics to develop skills.Maintain accurate records of repairs and maintenance activities.What Are We Looking ForStrong interest in mechanical systems and repair.Ability to learn and apply new skills quickly.Effective communication and teamwork abilities.High level of attention to detail and accuracy.Capability to work in various weather conditions and environments.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$26.88 per hour.Benefits through the Union for Medical, Dental, Vision and PensionUnion paid vacation, sick leave and holidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: MARKET LEADING PAY, PLUS BONUSESElite Acurais part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Automotive Service Technicians/Mechanicsto join our team!Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees. We offer...Market Leading Pay, based on experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needAutomotive technician or mechanic experienceA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35 - $40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.