Job SummaryGeneral facility maintenance and repair duties as directed. Pneumatic and direct digital control experience. Knowledge of air conditioning and refrigeration including ice machines. Experienced in troubleshooting and repair of HVAC equipment. Ability to cut and thread pipe to meet base fabrication needs. Maintain and install filter systems. Some knowledge of medical gas systems. Install and maintain circulating pumps. Knowledge of high-pressure steam boilers and delivery systems. Estimate and requisition materials needed for projects. Working knowledge of OSHA, State, DOH and Hospital Safety Standards. Ability to analyze and troubleshoot Electrical controls. Additional electrical experience is helpful. Experienced in all forms of soldering. Ability to understand and complete preventative maintenance programs. Be able to perform heavy lifting and climbing. Ability to perform snow removal duties including shoveling salting and working knowledge of snow plow operations. Strong self-motivation is expected.Core Job Responsibilities55% Work order response: but not limited to area temperature problems throughout the Facility. Replacing/repairing pump and circulators. Repairing and charging refrigerant systems. Adding or moving equipment for construction projects. 25% Preventive maintenance duties: Typical but not limited to filter changes, coil cleaning, and belt changes. Ice machine cleaning and service. 10% Compliance with regulatory responsibilities: Ensure appropriate function is maintained to comply with various regulatory agencies. Refrigerant reclaiming, and Fire barrier repair. 10% Quality Improvement: to look for ways to improve the patient/visitor experience. Update heating and cooling systems. Modifying or move HVAC components or sensors for improve comfort. Education/Experience RequirementsRequired:High School or equivalent,5 years of HVAC ExperiencePreferred:Associates or higher degree3-5 years of Healthcare Facilities or Trade Experience Licensure/Certification RequirementsRequired:Universal Refrigerant Reclaiming licenseDisclaimerQualified applicants will receive consideration for employment without regard to their age, race, religion, national origin, ethnicity, age, gender (including pregnancy, childbirth, et al), sexual orientation, gender identity or expression, protected veteran status, or disability.Successful candidates might be required to undergo a background verification with an external vendor.Job DetailsReq Id 89077Department ENGINEERINGShift DaysShift Hours Worked 7.50FTE 0.94Work Schedule UFCSMEmployee Status A1 - Full-TimeUnion 2006 - UFCWPay Range $21 - $27 Hourly#GP01

Pay Rate: $16.00/hr - $24.00/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

About the Role The Field Technician provides support and maintenance services for computer systems based on manufacturers' specifications.What You'll Do Analyze diagnostic information and utilizes technical expertise to diagnose and repair/replace failed components based on manufacturer's system design specificationsProvide technical information as needed for further diagnostic work, project planning, etc.Provide some base installation services and replacement of hardware componentsFollow provided work instructions and adheres to daily administrative tasksWhat We're Looking For • Knowledgeable in manufacturers' system design and specifications• Able to diagnose, repair and replace computer system hardware components• Able to effectively utilize associated tools, meters, adaptors, and other equipment• Clear and proficient communication skills for interactions with customers, technical support teams, support groups (OEM, TD) et al.• 1-2 Years of relevant work experience• Experience and expertise in diagnosing, replacing and testing various computer systems and components. This includes, but not limited to, experience with computer systems, operating systems, cabling standards, data center equipment, networking hardware, server platforms, universal power supplies, cable dressing and labeling.• Other Education / Certifications: CompTIA A+ or Network+ certification or other OEM certifications• Must be able to drive a motor vehicle. Working Conditions • Local and Long-Distance Driving • Some lifting up to 75lbs. • Standby rotation and after hours availability. Salary Range Requirement Actual annual compensation offered will be based on several variables including geographic location, work experience, education and skills/ achievements, and will be mutually agreed upon at the time of offer. This is a non-exempt role with an hourly rate ranging from $30.00-$35.00, which is equivalent to an annualized salary range of $62,400-$72,800. What's In It For You Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.Diversity, Equity & Inclusion: It's not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.Don't meet every single requirement Apply anyway. At Shyft Global Services, a TD SYNNEX Company, we're proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you're excited about working for our company and believe you're a good fit for this role, we encourage you to apply. You may be exactly the person we're looking for!We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 20262BR Pay Class: Hourly Hourly Pay Rate: $25/hr Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: WHAT WE BRING TO THE TABLE Health, Dental & Vision Benefits Year-RoundVacation & Paid HolidaysOpportunities for Winter Work and Learning New Skills Heidelberg Materials is seeking a Mobile Equipment Mechanic for our Oriskany Falls facility located in Oriskany Falls. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. MILITARY VETERANS - HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials, we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. What You'll Get To Do Ensure compliance with all health, safety, and environmental regulations, and with company policies and procedures.Repair and maintenance functions consist of the following:Will perform diesel and gasoline engine repairs.Will diagnose and perform power train component repairs.Ability to troubleshoot and perform hydraulic system repairs.Must have a complete knowledge of truck air brake systems with the ability to diagnose and repair problems.Ability to repair suspension and steering system.Ability to troubleshoot and repair electrical systems.Ability to perform specialized component repair such as hydraulic and mechanical drives.Ability to make minor repairs including welding and cutting.Ability to perform and track Scheduled Maintenance in accordance with Hanson’s PM Program.Ability to perform road calls in a safe, fast and professional manner when necessary.Must have knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.Will maintain good housekeeping with the ability to keep company records and complete work orders on equipment.Will perform other duties and assignments as required. What We Are Looking For Prefer high school diploma or general education degree (GED)Must have a minimum of one year of experience repairing heavy equipment or vocational trainingNYS Heavy Equipment Inspector’s License or ability to obtainMust be able to write legibly to complete work orders and other required paperworkMust be able to read and comprehend maintenance manualsMust have basic hand and air tools required to repair heavy duty trucks.1 to 4 years of experience required. WORK ENVIRONMENT Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75-100 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Superior Metals Manufacturing is currently looking for a Maintenance Technician to join our team! This is a great opportunity to join a company that is poised for substantial growth with opportunities for advancement. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, paid vacation, and other great benefits. We also offer competitive compensation with overtime opportunities readily available. JOB SUMMARY Perform intermediate skilled maintenance tasks on state-of-the-art equipment. Job duties include troubleshooting and repairing foundry equipment using standard Maintenance skills. Perform regular scheduled preventative maintenance tasks. Other maintenance duties depending on company and departmental needs. Salary Range:$25.09 - $43.56 $1,000 sign-on bonus for eligible candidates! PRIMARY RESPONSIBILITIES Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine.Lays out, assembles, installs, maintains, and repairs pipe systems and related hydraulic and pneumatic equipment. Assembles and installs electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment.Perform preventive maintenance per schedule.Communicate with operators pre- and post-repair.Interact with operators to troubleshoot, repair and test equipment.Communicate with Team Leader and/or Maintenance Supervisor on major repair needs discovered.Complete, sign and submit work orders.Complete safety checklist on all work.Complete order list of equipment and supplies to be ordered.Review new equipment standard issues.Follow lock-out, tag out procedures.Housekeeping around the plant as necessary. QUALIFICATIONS Education: Associate's degree (A. A.) or equivalent from two-year college or technical school; or an equivalent combination of education and experience.3-5 years’ experience in a manufacturing environment.Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to write routine reports and correspond with co-workers and suppliers/vendors.Ability to read and interpret Electrical Pneumatic and Piping Schematics. Other Required Knowledge, Skills & Abilities: General knowledge of trades with quality experience in each. Skilled in use of standard mechanical hand tools. Good interpersonal skills. Good follow-up skills. Ability to troubleshoot. WORKING ENVIRONMENT Shop Floor: Manufacturing environment.Required PPE: Check for required PPE in areas you may be working inSafety Glasses: Needed in all areas of the plant.Steel toe shoes: Needed in all areas of the plant. Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management positionThis is a full time position

Maintenance ElectricianConsolidated Precision Products (CPP) Syracuse has a need fora Maintenance Electrician to join our team. This position reports to the Maintenance Manager and performs high skilled maintenance tasks on state-of-the-art equipment.CPP-Syracuse is a manufacturer of premium investment castings for the Air Craft andIndustrial Gas Turbine industry and has been in business for over 80 years.This position would be on the 1st shift. This position qualifies for $1,000 sign-on bonus, 5% quarterly bonus plan and a competitive pay rate. $26-$40/hr depending on experience.Major Responsibilities: Responsible for inspection, maintenance and repair of plant wide production equipment.Experience with 480V 3 phase electrical power distribution systems.Must understand electrical theory and have the ability to apply it with strong troubleshooting techniques.Experience with troubleshooting, maintaining and repairing machine instrumentation and electrical controls.Experience with troubleshooting High Voltage systems and equipment.Must have a good understanding of hydraulic and pneumatic systems and associated components.Knowledge of PLC controls (Allen Bradley) and associated software including Ladder Logic Programming.Must have the ability to read and interpret electrical, hydraulic schematics and plant drawings.Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.Must perform Mechanical and Electrical preventative maintenance tasks on all production equipment.Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.Responsible for adherence to all safety policies, practices and procedures. Requirements: Education:Associates degree (A.A.) or equivalent from two-year College preferred or electrical apprenticeship.Completion of a trade school or training is a plus.Experience:Experience in an industrial environment preferred.Electrical training or certification preferred.NFPA Certified Electrical Safety Technician (NFPA 70E)Preferred Skills: HVAC knowledge, robotic experience & computer network knowledgeGood judgment.Detail oriented CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance.CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations.Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Calls Please.Disclaimer:The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required of the job holder based upon business needs and at the request of CPP Management.It is the policy of CPP Syracuse, Inc. to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status.EOE/M/F/DISABLED/VETERANS This is a non-management positionThis is a full time position

Pay Rate: $16.00/hr - $24.00/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 20262BR Pay Class: Hourly Hourly Pay Rate: $25/hr Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: WHAT WE BRING TO THE TABLE Health, Dental & Vision Benefits Year-RoundVacation & Paid HolidaysOpportunities for Winter Work and Learning New Skills Heidelberg Materials is seeking a Mobile Equipment Mechanic for our Oriskany Falls facility located in Oriskany Falls. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. MILITARY VETERANS - HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials, we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. What You'll Get To Do Ensure compliance with all health, safety, and environmental regulations, and with company policies and procedures.Repair and maintenance functions consist of the following:Will perform diesel and gasoline engine repairs.Will diagnose and perform power train component repairs.Ability to troubleshoot and perform hydraulic system repairs.Must have a complete knowledge of truck air brake systems with the ability to diagnose and repair problems.Ability to repair suspension and steering system.Ability to troubleshoot and repair electrical systems.Ability to perform specialized component repair such as hydraulic and mechanical drives.Ability to make minor repairs including welding and cutting.Ability to perform and track Scheduled Maintenance in accordance with Hanson’s PM Program.Ability to perform road calls in a safe, fast and professional manner when necessary.Must have knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.Will maintain good housekeeping with the ability to keep company records and complete work orders on equipment.Will perform other duties and assignments as required. What We Are Looking For Prefer high school diploma or general education degree (GED)Must have a minimum of one year of experience repairing heavy equipment or vocational trainingNYS Heavy Equipment Inspector’s License or ability to obtainMust be able to write legibly to complete work orders and other required paperworkMust be able to read and comprehend maintenance manualsMust have basic hand and air tools required to repair heavy duty trucks.1 to 4 years of experience required. WORK ENVIRONMENT Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75-100 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPPmay be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits, like working5% bonus plan & Wages start at $25.19+ Maintenance Mechanic -Performs all required duties relating to installing and troubleshooting plant production equipment. This is a 1st shift position working Monday through Friday Overtime as needed. Major Responsibilities: Responsible for ordering and maintaining supplies to support all maintenance functions.Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc.Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine.Dismantles defective machines and equipment and installs new or repaired parts.Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaceDesign, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment.Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers.Repairs and maintains physical structure of establishment.Responsible for adherence to all safety policies, practices and procedures. Requirements: Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; orrelated experience and/or training; or equivalent combination of education and experience.Experienced Forklift drivers preferred. Benefits: CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations. Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Calls Please. Disclaimer:The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required of the job holder based upon business needs and at the request of CPP Management. It is the policy of CPP tocooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANSThis is a non-management positionThis is a full time position

Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing! Job Summary: Are you looking for your next challenge Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system developmentall while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly.Work hands-on with 480V 3-phase electrical power distribution systemslet’s keep the lights on!Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise.Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient.Handle high voltage systems and equipment like a pro.Get acquainted with hydraulic and pneumatic systemsyour toolbox just got a little bigger!Utilize PLC controls and Ladder Logic Programming to enhance our automation processes.Read and interpret electrical and hydraulic schematics and plant drawings like a map to success.Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools.Perform preventative maintenance tasks to keep our production equipment in top shape.Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment.Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters.Inspect electrical systems for hazards and compliancesafety first!Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches.Adhere to all safety policies, practices, and proceduresbecause your safety matters! Qualifications: Education: High school diploma or GED.Experience: 5+ years in industrial maintenance/electrical experience.Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus.Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred.Certifications/Licenses: A valid Forklift License is preferred, but not required. Required Knowledge, Skills & Abilities: Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors.Mathematical Skills: Proficient in basic math operationsadding, subtracting, and working with fractions and decimals.Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions.Computer Skills: Familiarity with maintenance work order systems, PM software, and Microsoft Office. Why You'll Love Working With Us: Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!Competitive Pay: $25- $40 per hour, with potential to make more based on your experience and education. We also have available overtime.New Facility: Work in our brand-new, cutting-edge manufacturing environment.Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! About Us:Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management positionThis is a full time position

Pay Rate: $16.00/hr - $24.00/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 20262BR Pay Class: Hourly Hourly Pay Rate: $25/hr Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: WHAT WE BRING TO THE TABLE Health, Dental & Vision Benefits Year-RoundVacation & Paid HolidaysOpportunities for Winter Work and Learning New Skills Heidelberg Materials is seeking a Mobile Equipment Mechanic for our Oriskany Falls facility located in Oriskany Falls. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. MILITARY VETERANS - HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials, we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. What You'll Get To Do Ensure compliance with all health, safety, and environmental regulations, and with company policies and procedures.Repair and maintenance functions consist of the following:Will perform diesel and gasoline engine repairs.Will diagnose and perform power train component repairs.Ability to troubleshoot and perform hydraulic system repairs.Must have a complete knowledge of truck air brake systems with the ability to diagnose and repair problems.Ability to repair suspension and steering system.Ability to troubleshoot and repair electrical systems.Ability to perform specialized component repair such as hydraulic and mechanical drives.Ability to make minor repairs including welding and cutting.Ability to perform and track Scheduled Maintenance in accordance with Hanson’s PM Program.Ability to perform road calls in a safe, fast and professional manner when necessary.Must have knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.Will maintain good housekeeping with the ability to keep company records and complete work orders on equipment.Will perform other duties and assignments as required. What We Are Looking For Prefer high school diploma or general education degree (GED)Must have a minimum of one year of experience repairing heavy equipment or vocational trainingNYS Heavy Equipment Inspector’s License or ability to obtainMust be able to write legibly to complete work orders and other required paperworkMust be able to read and comprehend maintenance manualsMust have basic hand and air tools required to repair heavy duty trucks.1 to 4 years of experience required. WORK ENVIRONMENT Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75-100 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Position starts at $25-30 JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES Demonstrated ability to understand and work with advanced “shop” mathematical concepts.High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming.Excellent analytical and problem solving and resolution capability.Enthusiasm, drive, and work ethic in an ‘on-time’ environment.Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues.Demonstrates a solid understanding of 3D modeling software.Has the ability to create training materials and train shop floor employees.Possesses creative thinking skills and is a detail-oriented personality.Is able to communicate well to other members of the development team.Eliminate waste and elevates productivity using Lean Manufacturing program.Participate in the startup of new equipment.Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers.Adhere to AS9100 and ISO procedures and complianceEnsures all equipment controls are accurately defined and maintained.Contributes to team effort by accomplishing related results as needed.Responsible for adherence to all safety policies, practices and procedures.Ability to work flexible hours and demonstrate reliability.Ability to work at Chittenango facility. QUALIFICATIONS Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred.Experience: 3-5 years of experience with CNC programming, and operation of CNC machines.Knowledge of 3D modeling software and Gcode a must.Familiar with Motion Control and Vision.Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues.Experience and skill in troubleshooting control systems.Knowledge of GD&T practicesExperienced in interpretation of technical drawingsExperience with Coordinate Measurement Machine programming a plus CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. Check us out at www.cppcorp.com to learn more about our products and CPP Corporation. CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. Job Type: Full-time Salary: From $30.00 per hour This is a non-management positionThis is a full time position

** Join Our Growing Team at Superior Metals Manufacturing! ** Are you a tech-savvy, problem-solving guru with a passion for automation and innovation We're on the hunt for a dynamic Control Systems & Instrumentation Technician to supercharge our Operations & Engineering teams! If you thrive on troubleshooting PLC controls, developing cutting-edge manufacturing methods, and collaborating within a team environment, then this role is made for you. Dive into the world of robotics, automated systems, and Lean Manufacturingwhere your expertise will make a real impact! About the Role: As a Control Systems & Instrumentation Technician, you'll be the mastermind behind our manufacturing process improvements. Your mission To support and advance PLC controls, refine manufacturing methods, and help our teams reach new heights in production excellence. From enhancing robotic control systems to troubleshooting complex equipment issues, you'll be at the heart of our engineering innovation. What You'll Do: Be the Tech Wizard: Leverage your programming skills to tackle PLC and HMI systems like a pro.Solve Complex Puzzles: Troubleshoot equipment failures and run system tests to keep everything running smoothly.Invent & Innovate: Collaborate with cross-functional teams to develop new control methods and elevate our manufacturing processes.Design & Document: Create detailed electrical designs, schematics, and AutoCAD drawings to support new equipment standards.Lean & Mean: Drive productivity improvements and minimize waste through Lean Manufacturing principles.Startup Guru: Play a key role in the launch of new equipment and ensure seamless integration. Key Dimensions for Success: Reduce Downtime: Slash control-related failures and third-party costs.Tech-Savvy Skills: Proficiency in MS Office, computer literacy, Industrial Automation: Proficient in Studio 5000 and other automation software tools used in industrial control systems. Problem-Solving: Capable of diagnosing and troubleshooting control system issues in real-time. PLC Programming: Experienced in programming, configuring, and maintaining PLCs for automated equipment. Detail-Oriented: Complete tasks efficiently and accurately with top-notch organizational skills.Communication Skill: Stellar written and verbal communication is a must. Who You'll Work With: Maintenance Team: Collaborate on equipment issues and improvements.Manufacturing Managers: Partner to ensure control systems meet operational needs.Engineering Team: Work closely to drive advancements and solve complex problems. Qualifications: Education: Degree in Electrical Technology preferred.Experience: Proven skills in PLC and HMI programming, motion control, and vision systems. Robot experience is a bonus!Skills: Ability to troubleshoot control systems, configure HMI/IIOT systems, and solve problems with a realistic approach.Last, But Not Least: The ability to be reliable, work overtime as needed, and be committed to working at our Chittenango, NY facility. Why You'll Love Working With Us: Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!Competitive Pay: $30 - $40 per hour, with potential to make more based on your experience and education. We also have available overtime.New Facility: Work in our brand-new, cutting-edge manufacturing environment.Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! Ready to electrify your career Apply now and let's revolutionize the future of manufacturing together!About Us:Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status.SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.Consolidated Precision Product adheres to all US Export Administration Regulations.Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM.#EngineeringJobs #ControlSystems #Automation #Innovation #VETS This is a non-management positionThis is a full time position

Pay Rate: $16.00/hr - $24.00/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 20262BR Pay Class: Hourly Hourly Pay Rate: $25/hr Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: WHAT WE BRING TO THE TABLE Health, Dental & Vision Benefits Year-RoundVacation & Paid HolidaysOpportunities for Winter Work and Learning New Skills Heidelberg Materials is seeking a Mobile Equipment Mechanic for our Oriskany Falls facility located in Oriskany Falls. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. MILITARY VETERANS - HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials, we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. What You'll Get To Do Ensure compliance with all health, safety, and environmental regulations, and with company policies and procedures.Repair and maintenance functions consist of the following:Will perform diesel and gasoline engine repairs.Will diagnose and perform power train component repairs.Ability to troubleshoot and perform hydraulic system repairs.Must have a complete knowledge of truck air brake systems with the ability to diagnose and repair problems.Ability to repair suspension and steering system.Ability to troubleshoot and repair electrical systems.Ability to perform specialized component repair such as hydraulic and mechanical drives.Ability to make minor repairs including welding and cutting.Ability to perform and track Scheduled Maintenance in accordance with Hanson’s PM Program.Ability to perform road calls in a safe, fast and professional manner when necessary.Must have knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.Will maintain good housekeeping with the ability to keep company records and complete work orders on equipment.Will perform other duties and assignments as required. What We Are Looking For Prefer high school diploma or general education degree (GED)Must have a minimum of one year of experience repairing heavy equipment or vocational trainingNYS Heavy Equipment Inspector’s License or ability to obtainMust be able to write legibly to complete work orders and other required paperworkMust be able to read and comprehend maintenance manualsMust have basic hand and air tools required to repair heavy duty trucks.1 to 4 years of experience required. WORK ENVIRONMENT Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75-100 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled