Job SummaryGeneral facility maintenance and repair duties as directed. Pneumatic and direct digital control experience. Knowledge of air conditioning and refrigeration including ice machines. Experienced in troubleshooting and repair of HVAC equipment. Ability to cut and thread pipe to meet base fabrication needs. Maintain and install filter systems. Some knowledge of medical gas systems. Install and maintain circulating pumps. Knowledge of high-pressure steam boilers and delivery systems. Estimate and requisition materials needed for projects. Working knowledge of OSHA, State, DOH and Hospital Safety Standards. Ability to analyze and troubleshoot Electrical controls. Additional electrical experience is helpful. Experienced in all forms of soldering. Ability to understand and complete preventative maintenance programs. Be able to perform heavy lifting and climbing. Ability to perform snow removal duties including shoveling salting and working knowledge of snow plow operations. Strong self-motivation is expected.Core Job Responsibilities55% Work order response: but not limited to area temperature problems throughout the Facility. Replacing/repairing pump and circulators. Repairing and charging refrigerant systems. Adding or moving equipment for construction projects. 25% Preventive maintenance duties: Typical but not limited to filter changes, coil cleaning, and belt changes. Ice machine cleaning and service. 10% Compliance with regulatory responsibilities: Ensure appropriate function is maintained to comply with various regulatory agencies. Refrigerant reclaiming, and Fire barrier repair. 10% Quality Improvement: to look for ways to improve the patient/visitor experience. Update heating and cooling systems. Modifying or move HVAC components or sensors for improve comfort. Education/Experience RequirementsRequired:High School or equivalent,5 years of HVAC ExperiencePreferred:Associates or higher degree3-5 years of Healthcare Facilities or Trade Experience Licensure/Certification RequirementsRequired:Universal Refrigerant Reclaiming licenseDisclaimerQualified applicants will receive consideration for employment without regard to their age, race, religion, national origin, ethnicity, age, gender (including pregnancy, childbirth, et al), sexual orientation, gender identity or expression, protected veteran status, or disability.Successful candidates might be required to undergo a background verification with an external vendor.Job DetailsReq Id 89077Department ENGINEERINGShift DaysShift Hours Worked 7.50FTE 0.94Work Schedule UFCSMEmployee Status A1 - Full-TimeUnion 2006 - UFCWPay Range $21 - $27 Hourly#GP01

Clean Harbors Syracuse, NYis looking for a Mobile Vehicle Mechanic to join their safety conscious team!This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area. Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wages ($28-$35 per hour based on experience)Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings! Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times.Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as directed by management.Ability to perform thorough inspection of equipment and identify unsatisfactory condition.Full compliance with mandatory PPE requirements during all work-related activities and tasksTravel to other locations to perform repairs and maintenance on equipment as required.Completes and submits all associated paperwork as required for tracking PM schedules.Maintain active light duty or DQ driver status as per mobile vehicle type.Performs other duties and tasks as assigned from time to time by management. What does it take to work for Clean Harbors High School diploma or equivalent required.Valid driver's license and clean driving record.3+ years prior experience working on heavy duty-trucks and equipment.Must be able to provide own basic tools.Willingness to travel within assigned territory up to 70%.Attention to detail.Strong communication skills.Ability to work flexible shifts including nights, weekends, and overtime as required.Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed.Ability to pass a background, drug, and physical test upon hire. 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company for Women to Work for in Transportation” *CH #LI-KB1

AutoReqId: 20685BR Pay Class: Hourly Hourly Pay Rate: $28 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials recently acquiredCarver Sand & Gravel.Should you be offered employment and start employment during the calendar year 2024,Carver Sand & Gravelwill administer payroll and benefits for this business unit’s employees even though Heidelberg Materials is the business unit owner. What You'll Get To Do: Ensure compliance with all health, safety, and environmental regulations, and with company policies and procedures.Repair and maintenance functions consist of the following:Will perform diesel and gasoline engine repairs.Will diagnose and perform power train component repairs.Ability to troubleshoot and perform hydraulic system repairs.Must have a complete knowledge of truck air brake systems with the ability to diagnose and repair problems.Ability to repair suspension and steering system.Ability to troubleshoot and repair electrical systems.Ability to perform specialized component repair such as hydraulic and mechanical drives.Ability to make minor repairs including welding and cutting.Ability to perform and track Scheduled Maintenance in accordance with Heidelberg Material’s PM Program.Ability to perform road calls in a safe, fast and professional manner when necessary.Must have knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.Will maintain good housekeeping with the ability to keep company records and complete work orders on equipment.Will perform other duties and assignments as required. REQUIREMENTS: Prior experience as a Heavy Equipment MechanicExperience with engine and transmission rebuilds Benefits: Competitive hourly wage.Health, dental, and vision insurance.401k MatchPaid time off and holidays.Opportunities for advancement within the company.Comprehensive training and ongoing support. Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPay $22-$36 an hour DOE Responsibilities: This position is responsible for the installation of refrigeration systems following customer specifications, applicable building codes, and proper piping practices.Provide support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project.Providesthe required installation of pipe hangers as directed by the foreman.Provides construction support by welding and slip-hosing copper pipes, and assist the foreman as needed on the job.Provide support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems.Perform other duties and projects as assigned. Qualifications: High school diploma or GED equivalent work experience and trade or technical school classes5+ years of experience in the construction industry preferred and hands-on field experience in commercial refrigeration, electrical, and/or fixtures construction.EPA Certification (Type II)Experience in copper brazing, and market remodeling.Good drivingrecord.Knowledge of electrical systems and ability to wire installations.Knowledge of carpentry.Knowledge of refrigeration systems and piping of refrigeration equipment.Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to hang evaporation coils and install overhead hangers.Ability to use hand and power tools and good mechanical skills.Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance.Ability to work with minimal supervision. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, pipefitter

** Join Our Growing Team at Superior Metals Manufacturing! ** Are you a tech-savvy, problem-solving guru with a passion for automation and innovation We're on the hunt for a dynamic Control Systems & Instrumentation Technician to supercharge our Operations & Engineering teams! If you thrive on troubleshooting PLC controls, developing cutting-edge manufacturing methods, and collaborating within a team environment, then this role is made for you. Dive into the world of robotics, automated systems, and Lean Manufacturingwhere your expertise will make a real impact! About the Role: As a Control Systems & Instrumentation Technician, you'll be the mastermind behind our manufacturing process improvements. Your mission To support and advance PLC controls, refine manufacturing methods, and help our teams reach new heights in production excellence. From enhancing robotic control systems to troubleshooting complex equipment issues, you'll be at the heart of our engineering innovation. What You'll Do: Be the Tech Wizard: Leverage your programming skills to tackle PLC and HMI systems like a pro.Solve Complex Puzzles: Troubleshoot equipment failures and run system tests to keep everything running smoothly.Invent & Innovate: Collaborate with cross-functional teams to develop new control methods and elevate our manufacturing processes.Design & Document: Create detailed electrical designs, schematics, and AutoCAD drawings to support new equipment standards.Lean & Mean: Drive productivity improvements and minimize waste through Lean Manufacturing principles.Startup Guru: Play a key role in the launch of new equipment and ensure seamless integration. Key Dimensions for Success: Reduce Downtime: Slash control-related failures and third-party costs.Tech-Savvy Skills: Proficiency in MS Office, computer literacy, Industrial Automation: Proficient in Studio 5000 and other automation software tools used in industrial control systems. Problem-Solving: Capable of diagnosing and troubleshooting control system issues in real-time. PLC Programming: Experienced in programming, configuring, and maintaining PLCs for automated equipment. Detail-Oriented: Complete tasks efficiently and accurately with top-notch organizational skills.Communication Skill: Stellar written and verbal communication is a must. Who You'll Work With: Maintenance Team: Collaborate on equipment issues and improvements.Manufacturing Managers: Partner to ensure control systems meet operational needs.Engineering Team: Work closely to drive advancements and solve complex problems. Qualifications: Education: Degree in Electrical Technology preferred.Experience: Proven skills in PLC and HMI programming, motion control, and vision systems. Robot experience is a bonus!Skills: Ability to troubleshoot control systems, configure HMI/IIOT systems, and solve problems with a realistic approach.Last, But Not Least: The ability to be reliable, work overtime as needed, and be committed to working at our Chittenango, NY facility. Why You'll Love Working With Us: Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!Competitive Pay: $30 - $40 per hour, with potential to make more based on your experience and education. We also have available overtime.New Facility: Work in our brand-new, cutting-edge manufacturing environment.Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! Ready to electrify your career Apply now and let's revolutionize the future of manufacturing together!About Us:Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status.SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.Consolidated Precision Product adheres to all US Export Administration Regulations.Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM.#EngineeringJobs #ControlSystems #Automation #Innovation #VETS This is a non-management positionThis is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPPmay be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits, like working5% bonus plan & Wages start at $25.19+ Maintenance Mechanic -Performs all required duties relating to installing and troubleshooting plant production equipment. This is a 1st shift position working Monday through Friday Overtime as needed. Major Responsibilities: Responsible for ordering and maintaining supplies to support all maintenance functions.Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc.Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine.Dismantles defective machines and equipment and installs new or repaired parts.Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaceDesign, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment.Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers.Repairs and maintains physical structure of establishment.Responsible for adherence to all safety policies, practices and procedures. Requirements: Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; orrelated experience and/or training; or equivalent combination of education and experience.Experienced Forklift drivers preferred. Benefits: CPP-Steel Treaters e offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. CPP-Steel Treaters, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations. Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Calls Please. Disclaimer:The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required of the job holder based upon business needs and at the request of CPP Management. It is the policy of CPP tocooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANSThis is a non-management positionThis is a full time position

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Maintenance ElectricianConsolidated Precision Products (CPP) Syracuse has a need fora Maintenance Electrician to join our team. This position reports to the Maintenance Manager and performs high skilled maintenance tasks on state-of-the-art equipment.CPP-Syracuse is a manufacturer of premium investment castings for the Air Craft andIndustrial Gas Turbine industry and has been in business for over 80 years.This position would be on the 1st shift. This position qualifies for $1,000 sign-on bonus, 5% quarterly bonus plan and a competitive pay rate. $26-$40/hr depending on experience.Major Responsibilities: Responsible for inspection, maintenance and repair of plant wide production equipment.Experience with 480V 3 phase electrical power distribution systems.Must understand electrical theory and have the ability to apply it with strong troubleshooting techniques.Experience with troubleshooting, maintaining and repairing machine instrumentation and electrical controls.Experience with troubleshooting High Voltage systems and equipment.Must have a good understanding of hydraulic and pneumatic systems and associated components.Knowledge of PLC controls (Allen Bradley) and associated software including Ladder Logic Programming.Must have the ability to read and interpret electrical, hydraulic schematics and plant drawings.Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.Must perform Mechanical and Electrical preventative maintenance tasks on all production equipment.Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.Responsible for adherence to all safety policies, practices and procedures. Requirements: Education:Associates degree (A.A.) or equivalent from two-year College preferred or electrical apprenticeship.Completion of a trade school or training is a plus.Experience:Experience in an industrial environment preferred.Electrical training or certification preferred.NFPA Certified Electrical Safety Technician (NFPA 70E)Preferred Skills: HVAC knowledge, robotic experience & computer network knowledgeGood judgment.Detail oriented CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance.CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations.Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Calls Please.Disclaimer:The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required of the job holder based upon business needs and at the request of CPP Management.It is the policy of CPP Syracuse, Inc. to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status.EOE/M/F/DISABLED/VETERANS This is a non-management positionThis is a full time position

Superior Metals Manufacturing is currently looking for a Maintenance Technician to join our team! This is a great opportunity to join a company that is poised for substantial growth with opportunities for advancement. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, paid vacation, and other great benefits. We also offer competitive compensation with overtime opportunities readily available. JOB SUMMARY Perform intermediate skilled maintenance tasks on state-of-the-art equipment. Job duties include troubleshooting and repairing foundry equipment using standard Maintenance skills. Perform regular scheduled preventative maintenance tasks. Other maintenance duties depending on company and departmental needs. Salary Range:$25.09 - $43.56 $1,000 sign-on bonus for eligible candidates! PRIMARY RESPONSIBILITIES Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine.Lays out, assembles, installs, maintains, and repairs pipe systems and related hydraulic and pneumatic equipment. Assembles and installs electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment.Perform preventive maintenance per schedule.Communicate with operators pre- and post-repair.Interact with operators to troubleshoot, repair and test equipment.Communicate with Team Leader and/or Maintenance Supervisor on major repair needs discovered.Complete, sign and submit work orders.Complete safety checklist on all work.Complete order list of equipment and supplies to be ordered.Review new equipment standard issues.Follow lock-out, tag out procedures.Housekeeping around the plant as necessary. QUALIFICATIONS Education: Associate's degree (A. A.) or equivalent from two-year college or technical school; or an equivalent combination of education and experience.3-5 years’ experience in a manufacturing environment.Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to write routine reports and correspond with co-workers and suppliers/vendors.Ability to read and interpret Electrical Pneumatic and Piping Schematics. Other Required Knowledge, Skills & Abilities: General knowledge of trades with quality experience in each. Skilled in use of standard mechanical hand tools. Good interpersonal skills. Good follow-up skills. Ability to troubleshoot. WORKING ENVIRONMENT Shop Floor: Manufacturing environment.Required PPE: Check for required PPE in areas you may be working inSafety Glasses: Needed in all areas of the plant.Steel toe shoes: Needed in all areas of the plant. Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management positionThis is a full time position

AutoReqId: 20386BR Pay Class: Hourly Hourly Pay Rate: 19.00-21.00 Department: Production Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Haul Unit Operator for our St Johnsville facility located in St Johnsville NY. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. WHAT WE BRING TO THE TABLE Health, Dental & Vision Benefits Year-RoundVacation & Paid HolidaysOpportunities for Winter Work and Learning New Skills No Overnights- HOME DAILY! MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. What You'll Get To Do Did you like to play with trucks when you were a kid How would like to drive one in a Quarry (or underground mine) Heidelberg Materials is seeking a Haul Unit Operator who enjoys operating and maintaining heavy equipment while maximizing productivity. The successful candidate will be responsible for transporting materials from the quarry to stockpiles. CDL License not required as this type of trucking is done on company property. Operate the haul truck to transport rock products to the plant and stockpiles as directedUtilize equipment in a manner to maximize productivity and minimize wear and down timeOperate other mobile plant equipment as needed (ie. Water Truck, Loader)Work in all areas of the plant as neededReport mechanical or maintenance issues with equipmentEnsure compliance with all health, safety and environmental regulations, and with company policies and procedures; perform daily equipment inspections, as well as identify and assist in correcting unsafe conditions What We Are Looking For High School Diploma or equivalent required2 years prior haul truck (or other large mobile equipment) experience preferredPrevious experience in open pit mining operations and aggregate products a plusAbility to work different shifts, holidays and/or overtime as requiredMSHA Part 48 training a plusAbility to learn stockpile and plant flowPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment We appreciate that candidates have many questions when considering opportunities, so we want to let you know that we offer a comprehensive compensation and benefits package, which we like to share with candidates a little bit later in the process. No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 20889BR Pay Class: Hourly Hourly Pay Rate: $25 Department: Production Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials recently acquiredCarver Sand & Gravel.Should you be offered employment and start employment during the calendar year 2024,Carver Sand & Gravelwill administer payroll and benefits for this business unit’s employees even though Heidelberg Materials is the business unit owner. What You'll Get To Do: Key Job Duties: Ensure the safe and efficient operation of heavy equipment.Manage the transloading of cargoes and commodities securely.Report any unsafe operations or behaviors to the production manager.Conduct pre-job inspections and regular maintenance of equipment.Operate equipment under varying conditions, adjusting controls as necessary.Maintain a safe and healthy work environment by adhering to safety standards and company policies.Engage in continuous learning and training opportunities.Work independently, following instructions and completing tasks with minimal supervision. Skills and Qualifications: Teamwork skills and at least 1 year of experience in a similar role, preferably in an industrial setting.Knowledge of rig operations and maintenance.Experience in stevedoring is advantageous.Proficiency in operating heavy equipment.Flexibility to work rotating shifts, including nights, weekends, and holidays.High school diploma or equivalent.Valid driver’s license and ability to obtain a TWIC card.Must pass pre-employment drug screening, physical, and background check. Work Environment: Work in varying weather conditions and at different elevations.Exposure to moderate to high noise levels.Rotational shift work required, often exceeding twelve hours per day. Physical Requirements: Physically demanding role requiring climbing, lifting (over 50 lbs. occasionally), and other physical activities.Mandatory use of personal protective equipment (PPE), including hard hats, safety vests, gloves, and steel-toe boots. Compensation and Benefits: Competitive hourly rate based on qualifications and experience.Overtime pay (time and a half) after 40 hours per week.Comprehensive medical insurance.Paid time off and holiday benefits.Robust 401k retirement savings plan with a match.Company-paid life insurance and long-term disability plans.Opportunities for employee investment with Carver Group Ventures.Career development opportunities. No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 20817BR Pay Class: Hourly Hourly Pay Rate: $25 Department: Production Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials recently acquiredCarver Sand & Gravel.Should you be offered employment and start employment during the calendar year 2024,Carver Sand & Gravelwill administer payroll and benefits for this business unit’s employees even though Heidelberg Materials is the business unit owner. What You'll Get To Do Are you looking for a long-term position with a stable company Do you enjoy working with your hands and with large equipment Heidelberg Materials is seeking a qualified Heavy Equipment Operator . This position will be responsible for the operation of mining equipment and/or for operating quarry equipment. Ensure the safe and efficient operation of heavy equipment.Manage the transloading of cargoes and commodities securely.Report any unsafe operations or behaviors to the production manager.Conduct pre-job inspections and regular maintenance of equipment.Operate equipment under varying conditions, adjusting controls as necessary.Maintain a safe and healthy work environment by adhering to safety standards and company policies.Engage in continuous learning and training opportunities.Work independently, following instructions and completing tasks with minimal supervision. What We Are Looking ForTeamwork skills and at least 1 year of experience in a similar role, preferably in an industrial setting.Knowledge of rig operations and maintenance.Experience in stevedoring is advantageous.Proficiency in operating heavy equipment.Flexibility to work rotating shifts, including nights, weekends, and holidays.High school diploma or equivalent.Valid driver’s license and ability to obtain a TWIC card.Must pass pre-employment drug screening, physical, and background check. Work Environment:Work in varying weather conditions and at different elevations.Exposure to moderate to high noise levels.Rotational shift work required, often exceeding twelve hours per day. Physical Requirements:Physically demanding role requiring climbing, lifting (over 50 lbs. occasionally), and other physical activities.Mandatory use of personal protective equipment (PPE), including hard hats, safety vests, gloves, and steel-toe boots. Compensation and Benefits:Comprehensive medical insurance, dental, and vision.Paid time off and holiday benefits.401k with Company match.Company-paid life insurance and long-term disability plans.Career development opportunities. No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled