Travel Respiratory TherapistCompany: Fusion Medical StaffingLocation: Facility in Erie, PennsylvaniaJob DetailsFusion Medical Staffing is seeking a skilled Respiratory Therapist for a 13-week travel assignment in Erie, Pennsylvania. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team.Required Qualifications:One year of recent experience as a Registered Respiratory Therapist Registered Respiratory Therapist (RRT) credential from the NBRC Valid respiratory therapy license in compliance with state regulations Current BLS certification (AHA/ARC)Preferred Qualifications:ACLS or PALS Certification (AHA/ARC) Other certifications and licenses may be required for this positionSummary:A Registered Respiratory Therapist provides advanced respiratory care to patients with complex pulmonary disorders and critical illnesses. They independently assess, treat, and manage patients with a wide range of respiratory conditions, including those in intensive care units and emergency situations. RRTs work collaboratively with physicians and healthcare teams to deliver life-saving therapies and patient-centered care.Essential Work Functions:Collaborate with physicians to develop patient treatment plans Examine and interview patients with breathing and/or cardiopulmonary disorders Perform diagnostic tests, such as measuring lung capacity or collecting blood/sputum samples Treat patients through various methods including chest physiotherapy and aerosol medications Set up and monitor equipment to ensure the patient is receiving the correct amount of oxygen at the correct rate Observe and record patient status and progress Work collaboratively with a multidisciplinary team to ensure appropriate patient care Educate patients and/or family members on how to properly take medication and use equipment Perform other duties as assigned within the scope of RRT practiceRequired Essential Skills:Critical thinking, service excellence, and good interpersonal communication skills The ability to read, write, and communicate in the English language Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:Highly competitive pay for travel professionals Comprehensive medical, dental, and vision insurance with first day coverage Paid Time Off (PTO) after 1560 hours Life and Short-term disability offered 401(k) matching Aggressive Refer-a-friend Bonus Program 24/7 recruiter support Reimbursement for licensure and CEUsWhy Choose Fusion At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you.Other Duties Disclaimer:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice.Start your rewarding career as a Travel Respiratory Therapist with Fusion Medical Staffing and join our mission to improve lives. Apply now!*Fusion is an EOE/E-Verify Employer #pb8

Overview: At Powerback, we're on a mission to improve lives. As the leader in physical, occupational, speech, and respiratory therapies, we help older adults stay active and thrive while providing essential therapy for children at home and in school.With over 38 years of trusted service, our reach spans skilled nursing centers, assisted and independent living facilities, outpatient clinics, and home-based care. We're proud to deliver personalized care exactly where and when it's needed most.Join an industry-leading team that restores hope and makes a lasting impact. If you're passionate about making a meaningful difference and want to be part of the future of rehabilitation and wellness, Powerback is the place for you.Why Powerback Benefits:We offer Medical, Dental, and Vision plans to Full-Time team members. We offer Dental and Vision to Part-Time team members.Paid Time Off: We offer generous paid time off to Full-Time and Part-Time team members.Support for New Grads:Our Powerback Clinical Mentorship Program kicks off on day one, helping you learn from the best in the field.Continuing Education:Keep growing with free CEUs through Medbridge.H-1B Visa & Relocation Assistance:We support Visa or Green Card sponsorships, plus our Journey Travel Program lets you work across the U.S. with the security of a full-time role.Perks at Powerback:Enjoy exclusive discounts on Wireless/TV, Home/Auto/Renters and Pet Insurance, Childcare, Eldercare, and more. Earn rewards through our PowerZone Employee Recognition Program, and expand your expertise with our Clinicians in Action professional development program. Responsibilities: As a Speech Language Pathologist, you help patients get their power back. You are the person who can help people communicate, swallow, and work to diminish or remediate disorders or deficits. In doing this, you take responsibility for the effective and efficient delivery of rehab services, you design the plan, and work with patients to execute those plans.You're a healer and a helper, which is why you got into this line of work.You're equally adept at addressing the whole patient and seeing them as an individual, and you know your goal is the design of a program that will restore, reinforce, and enhance their speech and communication abilities.You're adaptable to the needs of the patient and can find joy in the variety of the work and the settings. From cleaning equipment to reporting to meetings, you thrive in a setting that keeps you moving through your day.You're a teammate and are looking for collaboration with your peers, but you're also happy to make referrals to help your patient get the care they need to thrive.You know that being a Speech Language Pathologist means you're a teacher who can train patients and caregivers on the skills they need to promote independence and productivity.If this sounds like you, we'd love to meet you! Qualifications: Qualifications1. A Master's degree in Speech-Language Pathology, Communication Disorders, Communicative Disorders or similarly-titled area that is consistent and acceptable to the American Speech-Language-Hearing Association. 2. A Certificate of Clinical Competence from the American Speech-Language-Hearing Association (ASHA) or be eligible to participate as an ASHA Clinical Fellow. We will also accept candidates who are eligible to obtain the Certificate of Clinical Competence.3. Licensed, certified or credentialed, as required in the state of practice. Posted Salary Range: USD $40.00 - USD $50.00 /Hr.

Our team is growing, and we're looking for top-caliber Physical Therapists to join us in Chardon and surrounding locations in Ohio.Why FOX Rehabilitation • Pioneer of Geriatric House Calls to older adults in their communities.• Provide physical therapy services in a 1:1 setting to help abolish ageism.• Drive rewarding patient outcomes.• Facilitate clinically-excellent autonomous interventions.• Benefit from the flexibility to create, control, and alter your treatment schedule.• Be a part of an Interdisciplinary approach by a therapy team focused on functional outcomes.Available Opportunities:• Full-time/Part-time - Salaried with benefits• PRN/Flex - PPU (Paid Per Unit)• H1B - Able to provide sponsorship to those who need it that are qualified• New Grads-FOX offers a widely recognized Emerging Professionals Mentor Program!What you'll get:• Clinical and non-clinical career growth opportunities• Supportive Clinical Community• Unlimited access to continuing education• Professional Certification Reimbursement• Access to cutting-edge technology• Medical, Dental, Vision, 401k (for those who qualify)What you'll need:• Valid Physical Therapy license in the state(s) of practice, or eligibility to apply• Degree from an accredited physical therapy program• Basic computer literacy skills• Current CPR certificationWho is FOX FOX is a primarily clinician-operated, professional private practice of full-time physical, occupational, and speech therapists, built on the foundation of Geriatric House Calls. Our one-on-one care fosters a rewarding environment, and therapists have the flexibility to shape their schedules for a successful work-life balance. Empowered by clinicians, FOX advocates for our people and believes in their significant contributions to our professional society.Contact FOX Now! Kelsey Newson, Clinical Career SpecialistYou can also text FOX to to learn more!#LI-KN1FOX Rehabilitation is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. In Ohio, the standard base pay range for a Full-Time role is $60,000 - $100,000 annually with an opportunity to earn more. Part-Time and FOX Flex (PRN) will be pro-rated.

We. Are. OneStaff. Medical. An independently-owned, nationally-recognized and amazingly awesome staffing firm ready to work for you! A work ethic forged in the Midwest, we are here to stand by your side and help you find your dream assignment anywhere in this great country. We want the same like-minded, awesome candidates to travel with us. Be bold. Enjoy work again. Let us help. THE POSITION: Assist patients with medical problems in the blood vessels, heart and lungs. Interview and examine patients with breathing or cardiopulmonary disorders. They also provide emergency care to patients suffering from heart attacks, drowning, or shock. *Weekly amount stated in the job postings is scaled based on estimated hourly wages and potential stipends available for the location of the assignment. Hourly wages are based on various factors including but not limited to: experience, demand, availability, location, etc. Please contact one of our amazing OneStaff Recruiting Specialists for more details. **Equal Opportunity Employer** BENEFITS: Insurance We provide group benefits for Health, Dental, Vision, Life, Short Term Disability, Long Term Disability, Accident, Critical Illness, and Identity Theft Protection. 401K You are eligible to enroll 1st of the month following hire date. We match 100% of your first 3% of deferrals and an additional 50% of the next 2% you contribute. Employee Assistance Program Free to all employees who’d like information on personal issues: Education, Dependent Care, Care Giving, Legal, Financial, Lifestyle & Fitness Management, Working Smarter.

Overview: Setting: Outpatient, Orthopedics Compensation: $1,717 - $2,013 estimated weekly pay Start: ASAP | open to 1-2 months out Duration: 13weeks | potential to extend Guaranteed Hours: 40 Benefits: Blue Cross Blue Shield medical benefits, paid housing or tax-free stipend, travel/license reimbursement, licensing team, and paid reward days Referral Program:Refer a friend and earn $500 Clickherefor similar opportunities and more information about travel therapy staffing. Delta Healthcare Providers (DHP), the travel therapy staffing division of The Delta Companies, identifies qualified therapists on behalf of healthcare facilities nationwide. A single point of contact provides direct knowledge of the industry to providers. The company has been recognized with several Best of Staffing® Awards.

Description Physical Therapist, PT – Home HealthAs a Physical Therapist you will be called to care when you're needed most. As part of Interim HealthCare, you'll support a full range of patient services to bring comfort and dignity to our clients.What we offer our Physical Therapists:Competitive pay, benefits, and incentives.Truly flexible scheduling – a dedication to work/life balance (Full-time (FT), Part-time (PT), PRN)Daily Pay option availableNo Overtime Required1:1 Patient careWorking at Interim HealthCare means a career unlike any other. With integrity at the center of all we do, we know that when we support you and your community, you'll change lives every day.As a Physical Therapist (PT), you will:Evaluate and treat patients suffering from physical disability or lack of mobility due to injury, disease, or surgery in a home care environmentEstablish and administer a treatment plan using exercises, stretching, manual therapy, and equipment to manage patients' pain and increase mobilityEducates patients and family members in rehabilitative care and activities necessary to promote health, safety, and independent livingCollaborate with other providers servicing your client(s) to reach the best possible patient outcomesTo qualify as a Physical Therapist (PT) with us, you will need:Licensure: Currentunrestrictedlicense to practice as a Physical Therapist (PT) in the state associated with this position.Current CPR/AED/BLS/First Aidcertification.Reliable transportation to/from care sites and/or work locationsOne (1) year of professional experience practicing as a Physical Therapist (PT) in a home health or similar setting.At Interim HealthCare, we know that being our best is non-negotiable – that's why we treat your family like our own. We take a patient-centric approach to address each individual's mind, body, and spirit, our caregivers work tirelessly to help their patients and families find peace. From our unmatched referral response times to our focus on quality improvement, the most beautifully complicated time of your life is our life's work.We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.#Erie1

Zurich North America is hiring a Premium Audit Auditor II to join our team! We are open to hiring talent in one of the following locations: Alabama, Arkansas, Connecticut, Delaware, Florida, Georgia, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Nebraska, New Hampshire, New Jersey, New York, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Vermont, Virginia, West Virginia, or Wisconsin. Key AccountabilitiesPlan, organize and manage assigned workload and territory. Provide timely and accurate service to the insured, agents, and internal business partners for the completion of the audit process on moderately complex risks. Provide information and feedback as needed to enhance the flow of communication and comfort level of internal and external customers.Ensure that audited exposures are accurately calculated. Resolve potential disputes/questions that arise from the auditing function. May assist in the training process for new auditors.Provide technical advice that enables a customer to solve a problem or improve business .Develop and maintain positive customer relationships.Anticipate customer needs and provide feedback on trends in order to recommend changes. Escalate technical issues within function or unit. Listen and understand needs, provide feedback for improvements to processes, customer service or products. Participate in short-term defined scope projectsBasic Qualifications::Bachelors Degree and 5 or more years in the Casualty Premium Audit areaORHigh School Diploma or Equivalent and 7 or more years of experience in the Casualty Premium Audit areaORZurich approved Apprenticeship Program including an Associate Degree and 5 or more years of experience in the Casualty Premium Audit areaANDExperience with laptop computer auditing and Microsoft OfficeKnowledge of NCCI Workers Compensation and ISO General Liability rules, manuals and industry practicesPreferred Qualifications:APACPCULarge, multi-state premium audit experienceStrong verbal and written communication skillsAdvanced Microsoft Excel skillsCompensation for roles at Zurich varies depending on a wide array of factors including but not limited to the specific office location, role, skill set, and level of experience. As required by local law, Zurich provides in good faith a reasonable range of compensation for roles. For additional information about our Total Rewards, Click here.Other rewards may include short term incentive bonuses and merit increases. Candidates with salary expectations outside of the range are encouraged to apply, and will be considered based on experience, skill, and education. The salary provided is a nationwide market range and has not been adjusted for the applicable geographic differential associated with the location where the position may be filled. The starting salary range for this position is$ 63,300.00 - $132,375.00,with short-term incentive bonus eligibility set at 10%.As an insurance company, Zurich is subject to 18 U.S. Code 1033.A future with Zurich. What can go right when you apply at Zurich Now is the time to move forward and make a difference. At Zurich, we want you to share your unique perspectives, experiences and ideas so we can grow and drive sustainable change together. As part of a leading global organization, Zurich North America has over 150 years of experience managing risk and supporting resilience. Today, Zurich North America is a leading provider of commercial property-casualty insurance solutions and a wide range of risk management products and services for businesses and individuals. We serve more than 25 industries, from agriculture to technology, and we insure 90% of the Fortune 500®. Our growth strategy is not limited to our business. As an employer, we strive to provide ongoing career development opportunities, and we foster an environment where voices are diverse, behaviors are inclusive, actions drive equity, and our people feel a sense of belonging. Be a part of the next evolution of the insurance industry. Join us in building a brighter future for our colleagues, our customers and the communities we serve. Zurich maintains a comprehensive employee benefits package for employees as well as eligible dependents and competitive compensation. Please click here to learn more.Zurich in North America is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.Zurich does not accept unsolicited resumes from search firms or employment agencies. Any unsolicited resume will become the property of Zurich American Insurance. If you are a preferred vendor, please use our Recruiting Agency Portal for resume submission.Location(s): AM - Pennsylvania Virtual Office, AM - Illinois Virtual Office, AM - Kansas Virtual Office, AM - Minnesota Virtual Office, AM - New Jersey Virtual Office, AM - Missouri Virtual Office, AM - New York Virtual Office, AM - Ohio Virtual Office, AM - Wisconsin Virtual Office, AM - Connecticut Virtual Office, AM - Indiana Virtual Office, AM - Michigan Virtual Office, AM - Nebraska Virtual Office, AM - Maryland Virtual Office, AM - Iowa Virtual Office, AM - Massachusetts Virt. Office, AM - Colorado Virtual Office, AM - South Dakota Virtual Office, AM - Delaware Virtual Office, AM - Idaho Virtual Office, AM - Virginia Virtual Office, AM - New Hampshire Virt. Office, AM - North Dakota Virtual Office, AM - Kentucky Virtual Office, AM - Maine Virtual Office, AM - Rhode Island Virtual Office, AM - Wyoming Virtual Office, AM - Vermont Virtual OfficeRemote Working: YesSchedule: Full TimeEmployment Sponsorship Offered:NoLinkedin Recruiter Tag: #LI-JM1 #LI-ASSOCIATE #LI-REMOTE

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Engineering Req ID:26560 SummaryLincoln Electric is growing the Plant Engineering team and has outstanding opportunities for an experienced Electrical Engineer. Our Plant Engineering team is responsible for implementing capital projects and providing engineering support for the Consumable and Machine divisions of Cleveland Operations. Electrical Engineers play a crucial role in designing the electrical systems for equipment used in manufacturing welding machines and consumables, ensuring that the production floor equipment adheres to corporate objectives related to safety, health, productivity, quality, and continuous improvement.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoElectrical Engineers collaborate in a team environment to design and support industrial electrical systems. This includes various types of equipment new and old. Specifically, you will:Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives.Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance.Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer.Update and maintain National Instruments LabVIEW code for testing applications and equipment.Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects.Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation.Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations.Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience.Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations.Integrate equipment into data collection systems and establish network topologies.Support network backup, device patching management, and control system asset inventory.Compile data from connected devices for organizational use and develop standards for control systems hardware and software.Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company’s 2025 Higher Standard Goals.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience RequirementsMinimum of a Bachelor's degree in Electrical Engineering with 3+ years of professional experience.Experience with AutoCAD Electrical CAD software.Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW.Knowledge of NFPA 70, 70E, and 79, and other technical codes.Knowledge of basic networking concepts and SQL Database.SkillsDemonstrate initiative and accept responsibilities with minimal supervision.Strong ownership and results-driven mindset.Good judgment, self-motivation, and safety consciousness.Excellent organizational skills.Superior written and oral communication abilities.Adaptability to handle diverse assignments and changing priorities.Hands-on work capability and effective collaboration on the shop floor.Critical thinking and exceptional problem-solving skills.Proficiency in supporting and troubleshooting industrial equipment.Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required.Effective teamwork with employees at all organizational levels.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Pediatric Location Director - RN (Registered Nurse)Work Location: 1600 Peninsula Drive, Suite 19, Erie, PA 16505 Schedule: Monday–Friday, no nights, weekends, or holidays Earning Potential: Starting at $70,000+Position Overview Are you ready to lead, inspire, and make a meaningful impact Aveanna Healthcare is seeking an experienced and compassionate Pediatric Registered Nurse (RN) with management experience to fill the Director position at our Prescribed Pediatric Extended Care (PPEC) Center in Erie, PA. In this leadership role, you’ll oversee day-to-day operations, ensuring high-quality care, effective management, and compliance with all policies, procedures, and regulatory requirements. This is a fantastic opportunity to utilize your clinical expertise and leadership skills while working with a growing healthcare company.What Makes This Opportunity UniqueBalanced Schedule: Enjoy a family-friendly Monday–Friday schedule with no nights, weekends, or holidays.Competitive Compensation: Offering starting salaries of $70,000+ along with a comprehensive benefits package and exciting employee perks.Leadership Impact: Direct a talented team, driving the growth and success of the center.Professional Growth: Strengthen your leadership skills with opportunities for advancement in a supportive environment.Essential Job FunctionsTeam Leadership: Recruit, interview, and hire competent staff with a focus on finding the most qualified candidates.Staff Development: Provide orientation, in-service education, continuing education, and annual evaluations, establishing goals for growth.Operational Excellence: Ensure proper supervision during all service hours, implement company policies, and maintain compliance with laws and regulations.Clinical Oversight: Collaborate with the Clinical Manager to ensure patients have current care plans, treatments are delivered according to physician orders, and care is effectively coordinated with families and the healthcare team.Census Growth: Develop and implement marketing strategies to increase PPEC census.Organization & Delegation: Plan, organize, and delegate tasks to ensure smooth operations.Why Choose Aveanna Health, Dental, Vision, and Company-paid Life InsurancePaid Holidays, Vacation Days, and Sick DaysFun Day and Inclusion DayMonthly Cell Phone Stipend & Bonus Potential401(k) Savings Plan with Employer MatchingEmployee Stock Purchase Plan with DiscountTuition Discounts & Reimbursement Program (conditions apply)Continuing Education Credits Sponsored by the CompanyOpportunities for Growth and RecognitionEmployee Relief Fund & Resource GroupsRequirementsActive RN License (PA)Five years of healthcare experience, pediatric preferredCPR Certification (can be obtained during orientation)Criminal Background CheckValid Driver’s LicensePreferencesBachelor of Science in Nursing (BSN) or Associate of Science in Nursing (ASN)Home health management experience preferredEqual Employment Opportunity and Affirmative ActionAveanna Healthcare provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, or genetics.KEYWORDS: Pediatric, PDHC, PPEC, PECC, home care, private dutyAs an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate.Notice for Job Applicants Residing in California

Respiratory Therapist - ICUWe are seeking a skilled and compassionate Respiratory Therapist to join our Intensive Care Unit (ICU) team. In this role, you will provide critical respiratory care to patients with severe breathing disorders or life-threatening conditions, ensuring optimal outcomes through advanced therapeutic interventions.Key Responsibilities:Assess, treat, and monitor patients with acute or chronic respiratory conditions in the ICU setting.Initiate and manage mechanical ventilation and other life-support systems for critically ill patients.Administer aerosol medications, oxygen therapy, and other respiratory treatments as prescribed.Perform diagnostic tests such as arterial blood gas analysis and pulmonary function testing to evaluate lung performance.Collaborate with physicians, nurses, and other healthcare professionals to develop and implement individualized care plans.Respond to emergency situations, including rapid response or code blue events, to provide airway management and support.Maintain accurate patient records and document all treatments and progress in compliance with hospital policies.Educate patients and families on respiratory care techniques and equipment use when transitioning out of the ICU.Work Environment:Work in a fast-paced ICU environment that requires critical thinking and quick decision-making skills.Collaborate closely with a multidisciplinary team dedicated to providing life-saving care.Be prepared for rotating shifts, including nights, weekends, and holidays, as required in critical care settings.Benefits:Competitive salary and comprehensive benefits package.Opportunities for professional growth through specialized training and certifications in critical care.A supportive work environment that values teamwork and innovation in patient care delivery.*This information is based on the Bureau of Labor Statistics (BLS). Actual job responsibilities may vary by location.*

We're bullish about your future here.Your experience is valuable to us - and we know you have options. But we offer something the competition simply can't: our unique branch-team business model. One financial advisor and one branch office administrator entirely focused on building client relationships. It's our sole profit center. And as an Edward Jones advisor, you're at the helm. That's why we provide every possible resource to help you succeed. A branch office administrator to help you run your branch. World-class products, services and support. And the stability of a firm built on a long-term investment philosophy that has helped our clients achieve their goals for nearly a century. Empowering you to deliver tailored solutions to meet your clients' unique and complex needs. Building your practice your way - with 100% support from us.Job OverviewAs a financial advisor with Edward Jones, you'll develop and grow your own practice, supported by branch associates, a home-office team and other regional financial advisors. You'll benefit from the experience that comes from over 100 years of history. We're proud to have more offices in the U.S. and Canada than any other investment firm, serving over eight million clients.Our financial advisors are a valued part of our firm, and we credit much of our success to their unique experiences and professional backgrounds. We value an inclusive environment where everyone's different viewpoints help to achieve results.Edward Jones is built to help you positively impact clients' lives, helping them achieve their long-term financial goals as you make a difference in your community.Key ResponsibilitiesBuild relationships to create new clients via face-to-face and virtual sourcing strategies (e.g., residential, business, networking, introductions and referrals, social media and speaking engagements).Deeply understand clients' and prospective clients' needs, priorities, and concerns to accelerate trust and create personalized, comprehensive strategies to help clients achieve their goals.Oversee branch processes, roles, and responsibilities to ensure a high-quality, streamlined client experience consistent with firm policies and procedures, regulatory requirements, and ethical guidelines.Engage the branch team to create, monitor, and adjust the branch business plan to increase branch effectiveness and achieve desired business results.Create a highly engaging environment in the branch of mutual trust, respect, feedback, and accountability.As an associate, you are required to complete ongoing training offered by the firm and regulatory authorities, as well as required training to maintain registrations and licenses in good standing.A firm-provided branch office in the community.Client support to help lighten the load so you can focus on your clients.A support network that extends from your client support team office to your region to the home office - You'll work independently but will have a team of thousands backing you every step of the way.Benefits:Edward Jones' compensation and benefits package includes medical and prescription drug, dental, vision, voluntary benefits (such as accident, hospital indemnity, and critical illness), disability income continuation, basic life, and basic AD&D coverage. Income continuation, basic life, and basic AD&D coverage are provided at no cost to financial advisors. Edward Jones offers a 401k retirement plan, and tax-advantaged accounts: health savings account and flexible spending account. Financial advisors enjoy flexibility in their schedule and, where required by applicable law, are eligible for paid sick leave and paid time off. Financial advisors may be eligible for bonuses; profit sharing; paid medical and parental leave for Financial Advisors that satisfy eligibility requirements; and participation in the firm's Travel Award Program. All associates are eligible for the firm's Employee Assistance Program. For more information on the Benefits available to financial advisors, please visit our benefits page.Earn salary, commissions, new asset compensationNo ceiling to your earning potential and growth, and your compensation is tied to the effort you put inA multi-faceted compensation package that also includes opportunities for profitability bonuses, profit sharing, and incentive travelThe flexibility that you need to balance your personal and professional lives - the best of both worldsAs every situation is unique, speaking with a recruiter is recommended. You can may calculate a preliminary total compensation with this calculatorHiring Minimum $50,000Hiring Maximum $125,000Applications for this role are accepted on an ongoing basis.Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act. Edward Jones is prohibited from hiring individuals with certain specified criminal history as set forth in Section 3(a)(39) and 15(b)(4) and Rule 17a-3(a)(12) of the Securities and Exchange Act of 1934, and conducts background reviews consistent with FINRA Rule 3110(e). A copy of a notice regarding the provisions of the Los Angeles County Fair Chance Ordinance is available at: dcba.lacounty.gov/wp-content/uploads/2024/08/FCOE-Official-Notice-Eng-Final-8.30.2024.pdf.Read More About Job OverviewSkills/RequirementsFinancial advisors succeed by demonstrating a unique combination of ambition, self-motivation and commitment to establishing long-term client relationships. Financial advisors are driven by performance, and we ensure that their compensation and earning potential is reflective of their performance. They're confident and possess the ability to think critically, with sound judgment.What characteristics would make you a successful financial advisor Strong communications skills and self-starterLove of learning and challenges, including determination to succeedSkilled in long-term relationship buildingAdaptable to new information seeking the right solutions for clientsComfortable in your ability to think criticallyPassion for new opportunitiesCandidate qualifications:Series 7 and Series 66 requiredExperience in financial services working with clients, in-depth knowledge of investment products and services with a track record of successState insurance licenses preferred Preferred additional professional designations such as CFP® or CERTIFIED FINANCIAL PLANNER and/or CRPC or Chartered Retirement Planning CounselorRead More About Skills/RequirementsAwards & AccoladesAt Edward Jones, we are building a place where everyone feels like they belong. We're proud of our associates' contributions to the firm and the recognitions we have received.Check out our U.S. awards and accolades: Insights & Information Blog Postings about Edward JonesCheck out our Canadian awards and accolades: Insights & Information Blog Postings about Edward JonesRead More About Awards & AccoladesAbout UsJoin a financial services firm where your contributions are valued. Edward Jones is a Fortune 500¹ company where people come first. With over 9 million clients and 20,000 financial advisors across the U.S. and Canada, we're proud to be privately-owned, placing the focus on our clients rather than shareholder returns.Behind everything we do is our purpose: We partner for positive impact to improve the lives of our clients and colleagues, and together, better our communities and society. We are an innovative, flexible, and inclusive organization that attracts, develops, and inspires performance excellence and a sense of belonging. People are at the center of our partnership. Edward Jones associates are seen, heard, respected, and supported. This is what we believe makes us the best place to start or build your career. View our Purpose, Inclusion and Citizenship Report.¹Fortune 500, published June 2024, data as of December 2023. Compensation provided for using, not obtaining, the rating.Edward Jones does not discriminate on the basis of race, color, gender, religion, national origin, age, disability, sexual orientation, pregnancy, veteran status, genetic information or any other basis prohibited by applicable law.

WHEN YOU WORK FOR US, WE WORK FOR YOUWith Titan Medical, you gain access to thousands of travel nursing and allied health jobs across the country. You also get unmatched service. From the moment you apply, your recruitment specialist is focused on youhelping you build your profile to increase your chances of landing your perfect assignment. That includes developing your rsum, skills checklist and references.Travel - Respiratory TherapistWeekly Gross Pay: $1589.00 - $1789.00Location: Willoughby, OH, United StatesStart date: 9/7/2025Assignment length: 12 WeeksMinimum years of experience: 2 - previous travel experience is not requiredJob type: TravelerShift: OtherCertifications: RRT/BCLS/BLS - American Heart AssociationTitan Medical is looking for travelers to fill a Travel Respiratory Therapist position for a 13 week assignment in Willoughby, OH! Call Titan for additional details.

Starting Salary: $72,000 - $90,000 /year based on experience Environment: Special Education, Middle School & High School ChanceLight Behavioral Health, Therapy, & Education, a growing, dynamic organization with a social mission to offer hope, is seeking a Board Certified Behavior Analyst (BCBA) to join our award-winning Special Education team and perform meaningful work in a culture that welcomes innovation, encourages creative expression and offers limitless potential for personal and professional satisfaction! If you thrive in a fast-paced, goal-oriented, outcome-driven environment, seek a career with genuine purpose, and possess a problem-solving mindset, a sense of humor, and a stellar work ethic We Should Talk! As a Board Certified Behavior Analyst, you will provide comprehensive clinical and educational support tailored to the individual needs of Middle School and High School students, oversee and conduct educational and clinical training, and evaluate individual team member performance. In your role as the primary quality assurance leader, you will ensure adherence to applicable laws, regulations, and internal standards pertaining to educational and behavioral services. Responsibilities Include: Providing comprehensive training and ongoing support to teachers and educational staff in developing effective functional behavior assessments (FBAs) and behavior intervention plans (BIPs).Monitoring and evaluating the quality and effectiveness of academic and behavioral services provided to students.Supporting ChanceLight staff by demonstrating and reinforcing effective instructional practices to ensure student progression aligned with individualized education program (IEP) goals.Assessing professional development needs of educational staff; researching, developing, and delivering targeted training programs based on identified requirements.Participating actively in staff development activities, including attending conferences, professional training, and seminars to maintain and enhance core competencies.Training, certifying, and continually coaching school employees in implementing and maintaining crisis management systems.Assisting in recruitment, hiring processes, orientation, and ongoing training of behavior specialists and other pertinent staff.Researching, evaluating, and recommending evidence-based curricula and instructional resources that comply with educational standards and departmental requirements.Developing, implementing, and supervising systems designed to effectively meet the individualized needs of students, classrooms, and the entire educational site.Attending and actively participating in required meetings, including but not limited to school team meetings, interdisciplinary meetings, and all-staff sessions.Conducting regular, systematic quality assurance assessments at the student, staff, classroom, and site levels and providing detailed recommendations for continuous improvement.Ensuring consistent compliance with Department of Education regulations, as well as ChanceLight's internal policies and standards for educational excellence and behavioral interventions.Performing other duties and/or projects as assigned. Qualifications Required: Master's degree or higher in applied behavior analysis, behavioral therapy or a closely related field of study.Licensed currently or in the process of obtaining a board certified behavior analyst (BCBA) credential.Licensed currently or in the process of obtaining a special education credential preferred.Well-versed in applied behavior analysis (ABA) including positive behavior interventions and supports (PBIS), effective teaching strategies, classroom management systems, data-based decision making, and functional analysis/behavior intervention plans.Prior experience and/or knowledge in special education services and compliance, particularly for students with autism related disabilities.Highly skilled in working with individuals with severe learning, emotional behavioral disorders, autism spectrum disorders, and/or other related disabilities.Prior experience and highly skilled in crisis management systems and intervention.Prior experience and highly knowledgeable in working with students with IEP's.Ability to think and act quickly and calmly in an emergency and make independent decisions.Advanced oral and written communication, organization, conflict resolution, multitasking, problem solving, and decision-making ability.Proven success in developing and implementing effective treatment plans for students with diverse needs.Knowledge of relevant technology including experience with computers, Microsoft Office Suite, database entry and basic office equipment. ChanceLight Behavioral Health, Therapy, & Educationis the nation’s leading provider of alternative and special education programs for children and young adults. For more than 45 years, and in partnership with over 235 school districts nationwide,we have helped change the direction of more than240,000 student lives! Learn more about our history, our mission and the program services we provide by visiting the link below: https://bit.ly/m/WorkWithPurpose At ChanceLight we believe in providing more than just a job, as a member of our team you'll receive the opportunity to make meaningful impacts, the support needed to achieve success, and all the tools essential to reaching your personal & professional fulfillment! Your path to a truly rewarding career starts here – where growth, empowerment, and collaboration define our culture; and every day is aChanceto transform lives through education! Perks and Benefits Include: Comprehensive Medical, Dental and Vision PlansFREE Telehealth and Virtual Counseling SessionsFREE Health Advocacy Services and 24/7 Nurse LineCompany Paid Life & Disability InsuranceCompany Paid Employee Assistance ProgramFlexible Spending and Health Savings AccountsPersonal Protection Insurance PlansCigna Healthy Pregnancies, Healthy Babies ProgramLegal Services InsurancePet Health InsuranceAccrual-based Paid Time OffSchool Hours and Paid Holiday ScheduleExtensive Personal and Life Event Paid Leave Policy401k Retirement Saving PlanPerks at Work Employee Discount ProgramOpportunities for Growth & DevelopmentAnd So Much More! If you're ready to start making lasting impacts on the lives of students and contribute to the creation of a brighter future This Is YourChance! Join us and together, we can empower students to overcome challenges, build confidence and unlock their full potential! Careers, With ChanceLight Work. With Purpose. Copyright © 2024 ChanceLight Behavioral Health, Therapy, & Education, aChanceLight® company *Benefit plans and eligibility requirements may vary based on role and employment status.EducationRequiredMasters or better in Applied Behavior Analysis or related fieldLicenses & CertificationsRequiredAll State Req CredentialsBCBAPreferredSpecial Ed CertificationSkillsRequiredSpecial EducationMiddle School EducationHigh School EducationApplied Behavior Analysis (ABA)Positive Behavior Intervention and SupportFunctional Behavioral Assessment (FBA)Emotional DisturbanceAutismSpecific Learning DisabilCrisis InterventionCounseling & GuidanceTeacher Mentoring/TrainingIndividualized Education Programs (IEP)Project ManagementInterpersonal SkillsOffice/AdministrativeBehaviorsPreferredDedicated: Devoted to a task or purpose with loyalty or integrityFunctional Expert: Considered a thought leader on a subjectMotivationsPreferredAbility to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organizationEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Case Management Director Career Opportunity Highly regarded for your Case Management Director expertiseAre you an experienced and compassionate healthcare professional with a background in case management, seeking a career that aligns with your professional expertise and resonates with your personal values As the Director of Case Management at Encompass Health, you have the unique opportunity to lead a team and make a profound impact on the lives of individuals within your local community. This role combines fulfilling career opportunities close to home with the chance to make a meaningful difference in the well-being of those around you. Join us in this journey of care, compassion, and leadership as we work together to make a difference where it matters most, serving as a key member of our leadership team overseeing the day-to-day operations and management of our Case Management department.A Glimpse into Our WorldAt Encompass Health, you'll experience the difference the moment you become a part of our team. Being at Encompass Health means aligning with a rapidly growing national inpatient rehabilitation leader. We take pride in the growth opportunities we offer and how our team unites for the greater good of our patients. Our achievements include being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, among other accolades, which is nothing short of amazing.Starting Perks and BenefitsAt Encompass Health, we are committed to creating a supportive, inclusive, and caring environment where you can thrive. From day one, you will have access to:• Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.• Generous paid time off that accrues over time.• Opportunities for tuition reimbursement and continuing education.• Company-matching 401(k) and employee stock purchase plans.• Flexible spending and health savings accounts.• A vibrant community of individuals passionate about the work they do!Become the Case Management Director you've always aspired to be• Assume responsibility for the day-to-day operations and human resource management of the Case Management department.• Oversee the interdisciplinary plan of care and the discharge planning process to ensure the effectiveness and appropriateness of services with a central focus on census management, patient care outcomes, and key care indicators.• Act as a patient and family advocate, ensuring that services are delivered to meet the needs of patients and their families.• Provide guidance and support to Case Managers and other staff, including training on managing caseloads and interpreting regulations, policies, operational procedures, and objectives. Review operations to ensure a high level of quality consistent with organizational standards.• Build relationships with insurance companies, self-insured employers, case management firms, and other healthcare networks.• Celebrate the accomplishments and successes of our dedicated employees along the way.Qualifications• Current CCM® or ACMTM certification is preferred.• Must be qualified to independently complete an assessment within the scope of practice of his/her discipline.• If licensure is required for the discipline within the hospital's state, individual must hold an active license.• For Nursing, must possess bachelor's degree in nursing (BSN) with RN licensure.• For other eligible health care professionals, must possess a minimum of a bachelor's degree; a graduate degree is preferred.• Three years of hospital-based Case Management experience, including Utilization Review and Discharge Planning experience.• May be required to work weekdays and/or weekends, evenings and/or night shifts.• May be required to work on religious and/or legal holidays on scheduled days/shifts.The Encompass Health WayWe proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing!At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.We're eager to meet you, and we genuinely mean that. Join us on this remarkable journey!

Engineering Co-Op If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Eastlake is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ SEMESTERS AVAILABLE Fall 2025 JOB SUMMARY Engineering Co-ops will be assigned to New Product Development engineering or Production Engineering working cooperatively with manufacturing to develop robust processes and tooling to support the company’s growth in the industrial and aerospace investment casting markets. Individuals identified as dimensional will focus primarily on dimensional control, the dies, fixtures, gages, and other tooling associated with the manufacture of investment castings.Problem solving, and the concepts & tools of problem solving, are essential to the job. Engineers will be required to identify & define problems, perform root cause analysis, and implement solutions to problems that affect yield, rework, and overall quality of the product using a standardized approach (PDCA, Six-Sigma). Occasionally taking a leadership role in resolving cross-functional problems. The candidate must be able to travel locally periodically to other CPP facilities, customers and vendors to provide problem-solving and technical support. PRIMARY RESPONSIBILITIES Develop, maintain, and teach “best practice” investment casting procedures and practices.Responsible for the construction of all dies (shrink factor analysis), gages, and support tooling needed to produce and inspect cores, wax patterns, and castings.Interface with tooling vendors and CPP purchasing to produce a quality tool/die at a competitive price.Identify and address process yields using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.) to uncover variables in the process that are not maintained in a controlled fashion.Strong working knowledge of GD&T.Able to interpret customer drawings, specifications, models (CAD/NX), and layout reports.Good written and oral communication skills required to develop internal job instructions.Gage R&R, SPC, non-straightening processes and other cost reduction initiatives.Identify, evaluate and implement new process technologies that advance manufacturing and product capabilities.Communicate with tooling vendors to design concepts for wax pattern die rework, the build of gate dies and support fixtures.Document work procedures and processes.Work closely with other departments to ensure organization objectives are achieved.Improve Labor Utilization and Reduce Cost.Routinely audit production lots for adherence to established techniques and to ensure the repeatability of the results.Good verbal communications with all levels of management, manufacturing, and customer engineering groups. QUALIFICATIONS Working on a BS in Engineering. Junior or Senior Year Preferred. Tooling, design, and CAD (preferably NX) experience Preferred.Strong communication skills (written and verbal), PC skills and program management skills.Knowledge of Six Sigma and Lean Manufacturing Principles.Excellent organizational, interpersonal and documentation skills.Motivated individual with data driven problem solving techniques. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment.Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management positionThis is an internship position

Product Engineer If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Euclid is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ WHAT WE OFFER Weekly Pay for Hourly EmployeesComprehensive Benefit PlansQuarterly Bonus Opportunity401k with Company MatchEmphasis on Employee EngagementPaid Holidays and Vacation TimeTuition ReimbursementOpportunities for Advancement JOB SUMMARY Work cooperatively in a team environment to develop and enhance robust manufacturing processes and tooling to support the company’s growth in the aerospace and industrial investment casting markets.Develop, maintain, and teach “best practice” investment casting procedures and practices to ensure CPP business objectives are satisfied.Identify problems, generate alternatives and implement solutions to problems that affect yield, rework and overall quality of the product using a standardized approach.Take a leadership role occasionally in resolving cross-functional problems. PRIMARY RESPONSIBILITIES Support the construction of dies (shrink factor analysis), gages and support tooling needed to produce and inspect ceramic cores, wax patterns and castings.Identify and improve process yields using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.) to uncover variables in the process.Interface with tooling vendors and CPP Purchasing to produce a quality tool/die at a competitive price.Control the dimensional quality of castings to meet or exceed customer expectations.Develop internal job instructions.Identify, evaluate and implement new process technologies that will improve manufacturing and product capabilities.Document work procedures and processes.Work closely with other departments to ensure organizational objectives are met.Publish reports on research and completed tests using data-based decisions.Routinely audit production lots for adherence to established techniques and to ensure the repeatability of the results.Work closely with other departments to ensure organization objectives are achieved.Maintain a positive work atmosphere by behaving and communicating in a professional manner.Improve labor utilization and reduce cost. QUALIFICATIONS Education: BS in Engineering or related technical fieldExperience: 0-5 years’ experience in mechanical or product engineering in the investment casting industry. Increasing levels of responsibility.Certifications/Licenses: NoneOther Required Knowledge, Skills & Abilities: Knowledge of DS/SX (Directionally Solidified / Single Crystal) casting process, shell parameters and dimensional impact. Knowledge of statistics. Knowledge of Six Sigma and Lean Manufacturing principles. Strong working knowledge of GD&T. Ability to interpret customer specifications relative to establishing internal written NDT specifications. Excellent analytical skills. Excellent communication skills. Strong PC skills. Strong program management skills. CAD Skills. Excellent organizational, interpersonal and documentation skills. Ability to interpret customer drawings and models. Good written communication skills. Professionalism. Innovative thinking. Team orientation. Assertive. Energetic. Self-starter. Risk taker. Sense of urgency. WORKING ENVIRONMENT Working Environment: Office Environment. Occasional work required on weekends.Physical Demands: Sitting/Standing for extended periods of time, able to lift up to 20lbs, extended periods of time using a computer screen.Travel Requirements: 10%Required PPE: Check for required PPE in areas you may be working.Safety Glasses: Needed in all areas of the plant.Steel Toed Shoes: Needed in all areas of the plant. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment.Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a full time position

Do you like helping others excel Do you like interacting with customers and finding ways to make them happy Do you like partnering with peers to get big results Well, being a Fine Jewelry Supervisor at JCPenney might be a perfect fit! Your role as the Fine Jewelry Supervisor is to supervise and engage a team of Fine Jewelry associates to deliver an amazing shopping experience that will delight our customer, creating loyalty that will have them coming back to the store for years to come! You will be expected to provide great Customer service and sales; sales floor leadership and staff supervision; scheduling to meet coverage, along with an ability to provide dynamic leadership, and consistent execution of the elements that drive sales.Primary Responsibilities:Customer Service- Models and holds team accountable for outstanding customer service. Actively listens to customer issues to resolve problems. Maximizes sales and service by ensuring staff is scheduled appropriately. Drive planning and execution of events and credit card acquisition.Sales- You are constantly challenging yourself and the team to drive profitable sales growth through supervising and engaging with the associates. Coaches and develops team by modeling JCPenney's company values to build lasting customer relationships that drive productivity and sales.Merchandise Flow & Placement- You will be well prepared to provide direction and support to your team to ensure that merchandise flows to the floor efficiently. You and your team and constantly working to maintain stock levels and presentation standards to the customer. Team Development - Partners with store management team to source and hire store talent for hourly positions. Plays an active role in the training and development of associates; coaches in the moment, addresses performance issues, and partners with the General Manager on succession planning for the store.Performance Standards - Consistently meets established performance standards; including but not limited to shrink and safety initiatives, Omnichannel, scheduling efficiency, associate relations, engagement, customer service, profit, productivity, and attendance.Core Competencies & Accomplishments:To achieve success at JCPenney, a supervisor will possess the following:Work experience- Minimum of 2 years retail experienceEducation- bachelor's degree or equivalent work experienceDrives Performance - Solve problems and make smart decisions that drive sales, profit, or customer service; execute your work efficiently and effectively; inspire strong performance in yourself and others.Builds Relationships - Develops positive relationships, establishes strong networks, shows respect for different styles, and communicates effectively to a wide audience.Intensity- Proactively find ways to improve the customer experience; show the confidence and courage to do what is right; act with energy and urgency.Shows Courage - A confident leader; willing to take on challenging assignments. Acts in accordance with beliefs and deals with conflict quickly and in a positive manner.In addition to a competitive wage, this position offers 1% commission on sales of qualified merchandise and a 10% commission for Service and Care plans.What you get:If eligible, we offer a competitive benefits package including medical/dental/vision, term life insurance, paid vacation/holidays*, and 401(k) with Company match. All associates are eligible for an associate discount on JCPenney merchandise. For paid holidays, associates who are eligible for paid vacation (MTO) are also eligible for eight paid holidays during the calendar year. All store hourly associates scheduled to work on a designated holiday will receive additional compensation. *For paid vacation days, as well as eligibility requirements for other benefits, please visit About JCPenney:JCPenney is the shopping destination for diverse, working American families. With inclusivity at its core, the Company's product assortment meets customers' everyday needs and helps them commemorate every special occasion with style, quality, and value. JCPenney offers a broad portfolio of fashion, apparel, home, beauty, and jewelry from national and private brands and provides personal services including salon, portrait and optical. The Company and its 50,000 associates worldwide serve customers where, when, and how they want to shop - from jcp.com to more than 650 stores in the U.S. and Puerto Rico. In 2022, JCPenney celebrates 120 years as an iconic American brand by continuing its legacy of connecting with customers through shopping and community engagement. Please visit JCPenney's Newsroom to learn more and follow JCPenney on Facebook, Instagram, Twitter, and LinkedIn.Pay RangeUSD $19.50/Hr -USD $24.38/Hr.

Starting Hourly Rate / Salario por Hora Inicial: $15.00 USD per hourALL ABOUT TARGETWorking at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. ALL ABOUT HUMAN RESOURCESYou are a team that champions change, proactively removes roadblocks and builds diverse and inclusive talent strategies to deliver on our guest centric mission. You are part ofa Human Resource (HR)team who are committed to supporting teams and leaders to build a sales force that is passionate about exceeding guests’expectations and a place where teams love to work. At Target, we believe in our team members having meaningful experiences that help them build and develop skills for a career. The role of a Human Resources Expert can provide you with the: Knowledge of federal,state and local employment lawsExperience using basic Microsoft Office Suite computer and workforce management programsAbility to effectively use scheduling software As a Human Resources Expert, no two days are ever the same, but a typical day will most likely include the following responsibilities: Work with your HR leader to anticipate and address specific talent and staffing needs for each area of the business; this includes understanding guests’ needs and ensuring the right mix of experience, and enthusiasm to deliver on the in-store and digital shopping experiences.Lead focused recruiting efforts to help store leaders find and hire candidates with the right skills and experiences to best serve their guest.Support team member and leader training needs and be an advocate for continuous learning.Be an expert resource for scheduling systems and pay practices.Be approachable and available by listening to team members and collaborating with appropriate leaders to take action as needed.Deliver on all Human Resources processes and programs to maximize team member engagement and minimize business disruption.Support your leader in following company compliancepolicies that mitigate risk to the team member experience.Create a welcoming experience by greeting guests as you are completing your daily tasks.When a guest needs assistance, engage with guests in a welcoming way, to help solve their specific needs.Thank guests and let them know we’re happy they chose to shop at Target.Demonstrate a culture of ethical conduct, safety and compliance.Work in a safe manner at all times;comply with all safety policies,best practices, and training; report hazards and correct where possible.All other duties based on business needsWHAT WE ARE LOOKING FORThis may be the right job for you if:You enjoy interacting and helping others - including guests that shop our store and fellow team members you work with. You thrive in a fast-moving, highly active and physically demanding role, where teamwork, flexibility, and creative problem solving are key to success. You are open to working a flexible work schedule with varying hours, days or shifts (including nights, weekends, holidays and other peak shopping times).The good news is that we have some amazing training that will help teach you everything you need to know to be a Human Resources Expert. But there are a few skills you should have from the get-go:Welcoming and helpful attitude toward all guests and other team membersAbility to communicate on multiple frequency devices and operate handheld scanners, and other technology equipment as directed.Effective communication skillsWork both independently and with a teamResolve guest questions quickly on the spotAttention to detail and follow a multi-step processesCapability to remain focused and composed in a fast-paced environment and accomplish multiple tasks within established timeframesWe are an awesome place to work and care about our teams, so we want to make sure we are clear on a few more basics that we expect:Accurately handle cash register operations as needed.Lift product up to 10 pounds regularly without additional assistance from others.Capable of working in and exposure to varying temperatures, humidity, and other elements while performing certain job duties including but not limited to Drive-Up, carryout, etc.Ability to remain mobile for the duration of a scheduled shift (shift length may vary).Flexible work schedule (e.g., nights, weekends and holidays); reliable and prompt attendance necessaryFind competitive benefits from financial and education to well-being and beyond at .Benefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_A | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_AAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or reach out to Guest Services at 1-800-440-0680 for additional information.

As a Store Manager Trainee, you’ll train on all aspects of successfully running a store in preparation for running for your own store. You’ll be involved in supervising day-to-day store activities, ensuring overall store performance, identifying staffing needs, managing schedules and developing operational action plans while mentoring and developing the team. Position Type: Full-TimeEstimated Hours: 45 hours per weekStore Manager Trainee Starting Wage: $28.50 per hourEstimated Store Manager Earning Potential Year 1: Up to $105,500 (inclusive of salary and bonus when applicable)*Estimate may vary by location Duties and Responsibilities:Must be able to perform duties with or without reasonable accommodation. • Consistently demonstrate the Mindsets, ALDI Acts Competencies and Professional Skills (M.A.P.) as outlined for the role.• Supervises the day-to-day operations and performance of the team to provide the highest level of customer service for the customer•Understands the overarching company strategy, as well as communicates and models the core values of the organization, to create a sense of teamwork and membership among employees• Handles customer concerns and ensures an appropriate resolution• Ensures proper store signage is maintained at all times, as well as the quality and freshness of ALDI products • Assists in the hiring of store personnel by reviewing resumes and employment applications, as well as interviewing candidates• Prepares, manages, and revises weekly schedules to ensure appropriate store staffing levels• Establishes and communicates job responsibilities and performance expectations to direct reports to ensure mutual understanding and desired results • Conducts store meetings• Identifies training and development opportunities that will assist direct reports in achieving enhanced performance• Conducts annual performance evaluations, recommending store personnel for advancement and termination as appropriate• Achieves store payroll and total loss budgets• Manages cash audits in conjunction with their direct leader according to company guidelines• Monitors the competitive environment within the community and makes recommendations to the direct leader regarding adjustments necessary to maintain a competitive position• Provides product feedback to their direct leader, including recommendations regarding new items to carry or those that should be discontinued• Provides a safe environment for employees, customers, and vendors by identifying and rectifying hazards, ensuring proper ergonomics, and maintaining store equipment in proper working order• Oversees product merchandising and maintains proper stock levels through appropriate product ordering• Conducts store inventory counts and reconciliations according to company guidelines• Complies with all established company policies and procedures while upholding the security and confidentiality of documents and data• Other duties as assigned Physical Demands: • Ability to stock merchandise from store receiving to shelving; ability to place product, weighing up to 45 pounds, on shelving at various heights• Regularly required to sit, stand, bend, reach, push, pull, lift, carry and walk about the store• Must be able to perform duties with or without reasonable accommodations. Job Qualifications: • You must be 18 years of age or older to be employed for this role at ALDI• Ability to work both independently and within a team environment• Ability to provide and lead others to provide prompt and courteous customer service• Ability to develop rapport, trust, and open communication that enhances the growth and job performance of direct reports• Ability to interpret and apply company policies and procedures• Ability to establish goals, guide employee performance to ensure the quality and completion of work assignments• Ability to evaluate and drive performance of self and others• Ability to understand and apply management principles concerning budgeting, personnel costs, and expenses• Ability to operate a cash register efficiently and accurately• Ability to safely and properly operate equipment, including electric/manual hand jack, floor scrubber, and cardboard baler and perform general cleaning duties to company standards• Ability to stay organized and multi-task in a professional and efficient manner, following instructions and giving attention to detail• Meets any state and local requirements for handling and selling alcoholic beverages Education and Experience: • High School Diploma or equivalent preferred• A minimum of 3 years of progressive experience in a retail environment• A combination of education and experience providing equivalent knowledge • Prior management experience preferred Travel: • Full-Time Store Manager Trainees will often train at multiple locations and must have flexibility to travel within divisional requirementsALDI offers competitive wages and benefits, including:401(k) PlanCompany 401(k) Matching ContributionsEmployee Assistance Program (EAP)PerkSpot National Discount Program In addition, eligible employees are offered:Medical, Prescription, Dental & Vision InsuranceGenerous Vacation Time & 7 Paid HolidaysUp to 6 Weeks Paid Parental Leave at 100% of payUp to 2 Weeks Paid Caregiver Leave at 100% of payShort and Long-Term Disability InsuranceLife, Dependent Life and AD&D InsuranceVoluntary Term Life InsuranceALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

About the RoleAs an Operations Manager or Merchandising Manager you will provide oversight of store operations and/ or merchandising, delivering excellent customer service. You will teach, coach, and develop associates to execute operational, service and merchandising processes focused on consistent execution and efficiency. You will be accountable for the overall results and success of all key performance measures with a primary goal of driving sales and profitability.What You’ll DoEnsure sound operational processes, including receiving and processing product, stockroom management and omni channel fulfillment Drive accuracy through completion of all required business directives such as merchandise disposition practicesMaintain appropriate levels of product on the sales floor by planning and directing floor replenishment as necessary based on sell through and seasonal changesLead efforts at point of sale and customer service departments to deliver speed of service transactions while creating a compelling customer experienceEnsure that store merchandising standards follow visual merchandising direction, accomplishing product presentation; make decisions about and adaptations to merchandising direction based on the layout, adjacencies and needs of the store; ensure product is displayed in a manner which is clear and easy to understand and is compelling to the customerMaintain appropriate levels of product on the sales floor by planning and directing floor remerchandising and replenishment as necessary, based on sell through and seasonal changesDirect, teach and train associates to accurately execute all company merchandising direction to brand standards in a timely mannerLead execution of pricing activities in the store, ensure that price changes, sign changes and ticketing procedures are completed accurately and efficientlySupport prevention of loss by educating associates, monitoring daily store activity, maintaining product protection standards, ensuring company policies are followed and partnering with Loss PreventionManage the training processes for new hires, ensuring associates are skilled on process best practices, proper inventory procedures, productivity and merchandising standards, product knowledge and how to leverage Kohl’s tools and resources All manager roles at Kohl’s are responsible for:Managing with integrity, honesty and fostering teamwork in an engaged and inclusive cultureExercising good judgment and discernment when making decisions; taking appropriate partners as neededModeling, enforcing and providing direction and guidance to associatesDemonstrating, coaching and developing a customer service mindset, including customer service techniques, anticipating customer needs and satisfactorily resolving issuesEnsuring the store has strong operational standards, shortage mitigation, and merchandising presentation to include accurate pricing and proper signingMonitoring and adjusting resources as the business dictates to support customer needs and workload demandsAssessing key performance indicators (KPIs) to make informed business decisions that drive overall store resultsManaging talent, including hiring, training, developing, and supervisingAccomplishing multiple tasks within established timeframesTraining, monitoring and reinforcing company policies, procedures, standards and guidelinesMaintaining adherence to company safety policies and ensuring the safety of associates and customersOther responsibilities as assigned What Skills You HaveRequiredMust be 18 years of age or olderExperience supervising teams or associates, including the responsibility for coaching to achieve daily goals and performance managementGreat verbal/written communication and interpersonal skillsExcellent decision-making and problem-solving skills to make quick decisionsStrong people management skills and ability to develop talentFlexible availability, including days, nights, weekends and holidays PreferredExperience working in a retail environment, preferably in a managerial positionCollege degree OR equivalent combination of education and 2 years experience in retail or similar industry

Travel Certified Respiratory Therapist (CRT)Company: Fusion Medical StaffingLocation: Facility in Erie, PAJob Details:Fusion Medical Staffing is seeking a skilled Certified Respiratory Therapist for a week travel assignment in Erie, PA. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team.Required Qualifications:One year of recent experience as a Certified Respiratory TherapistCertified Respiratory Therapist (CRT) credential from the NBRCValid respiratory therapy license in compliance with state regulationsCurrent BLS certification (AHA/ARC)Preferred Qualifications:ACLS or PALS Certification (AHA/ARC)Other certifications and licenses may be required for this positionSummary:A Certified Respiratory Therapist delivers respiratory interventions and support for patients with acute respiratory problems as well as routine care for chronic respiratory disorders. They assist in the treatment and management of patients with common pulmonary conditions such as asthma, COPD, and pneumonia. CRTs administer respiratory treatments, monitor equipment, and educate patients and families on the proper usage of respiratory therapies and devices.Essential Work Functions:Assist in implementing and adjusting patient treatment plans under the guidance of physicians or RRTsExamine and interview patients with breathing and/or cardiopulmonary disordersPerform diagnostics tests, such as measuring lung capacity or collecting blood/sputum samplesAdminister respiratory treatments, including aerosol medications and oxygen therapySet up and monitor equipment to ensure the patient is receiving the correct amount of oxygen at the correct rateObserve and record patient status and progressEducate patients and/or family members on how to properly take medication and use equipmentPerform other duties as assigned within the scope of CRT practiceRequired Essential Skills:Critical thinking, service excellence and good interpersonal communication skillsThe ability to read, write, & communicate in the English language is requiredAbility to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skillsPhysical Abilities - Remain in a stationary position, move about, move equipment (50-100lbs), pushing, pulling, bendingInterpersonal Skills - To work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalismTechnical/Motor Skills - Ability to grasp, fine manipulation, pushing/pulling and able to move about when assisting with procedures and/or using department equipment.Mental Requirements - Must be able to cope with frequent contact with the general public, customers, and meeting deadlines under pressure. Must be able to work under close supervision occasionally as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detailSensory - Visual acuity, ability to effectively communicate.Benefits Include:Highly competitive pay for travel professionalsComprehensive medical, dental, and vision insurance with first day coveragePaid Time Off (PTO) after 1560 hoursLife and Short-term disability offered401(k) matchingAggressive Refer-a-friend Bonus Program24/7 recruiter supportReimbursement for licensure and CEUsWhy Choose Fusion At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you.Other Duties Disclaimer:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice.Start your rewarding career as a Travel Respiratory Therapist (CRT) with Fusion Medical Staffing and join our mission to improve lives. Apply now!*Fusion is an EOE/E-Verify Employer #pb7

We. Are. OneStaff. Medical. An independently-owned, nationally-recognized and amazingly awesome staffing firm ready to work for you! A work ethic forged in the Midwest, we are here to stand by your side and help you find your dream assignment anywhere in this great country. We want the same like-minded, awesome candidates to travel with us. Be bold. Enjoy work again. Let us help. THE POSITION: Assist patients with medical problems in the blood vessels, heart and lungs. Interview and examine patients with breathing or cardiopulmonary disorders. They also provide emergency care to patients suffering from heart attacks, drowning, or shock. *Weekly amount stated in the job postings is scaled based on estimated hourly wages and potential stipends available for the location of the assignment. Hourly wages are based on various factors including but not limited to: experience, demand, availability, location, etc. Please contact one of our amazing OneStaff Recruiting Specialists for more details. **Equal Opportunity Employer** BENEFITS: Insurance We provide group benefits for Health, Dental, Vision, Life, Short Term Disability, Long Term Disability, Accident, Critical Illness, and Identity Theft Protection. 401K You are eligible to enroll 1st of the month following hire date. We match 100% of your first 3% of deferrals and an additional 50% of the next 2% you contribute. Employee Assistance Program Free to all employees who’d like information on personal issues: Education, Dependent Care, Care Giving, Legal, Financial, Lifestyle & Fitness Management, Working Smarter.

Description As a Speech Language Pathologist (SLP), you will be called to care when you're needed most. As part of Interim HealthCare, you'll support a full range of patient services to bring comfort and dignity to our clients. What we offer our Speech Language Pathologists (SLP): Competitive pay, benefits, and incentivesTruly flexible scheduling - a dedication to work/life balance (Full-time (FT), Part-time (PT), PRN) Daily Pay option available No Overtime Required 1:1 patient care Excited to hear more Apply below. Working at Interim HealthCare means a career unlike any other. With integrity at the center of all we do, we know that when we support you and your community, you'll change lives every day. As a Speech Language Pathologist (SLP), you will: Provide in-home programs for treating patients' hearing, swallowing, and language impairments and limitationsEvaluate patient's speech and language abilities, both defects and assets, and perform periodic reevaluations Plan and provide rehabilitative services for speech and language conditions; select and administer diagnostic and therapeutic techniques and materials Record treatment types and reactions in clinical/progress notes; maintain adequate records on all patients, including summary reportsEducate other caregivers and family members in methods of assisting patients in improving, correcting, and accepting their disabilities To qualify for a Speech Language Pathologist (SLP) with us, you will need: Education: Master's Degree in Speech Language Pathology/Speech Therapy required Licensure: Current unrestricted license to practice as a Speech Language Pathologist (SLP)/Speech Therapist in the state associated with this positionCurrent CPR/AED/BLS/First Aid certification Reliable transportation to/from care sites and/or work locations One (1) year of professional experience practicing as a Speech Language Pathologist/Therapist (SLP) in a home health or similar setting At Interim HealthCare, we know that being our best is non-negotiable - that's why we treat your family like our own. We take a patient-centric approach to address each individual's mind, body, and spirit, our caregivers work tirelessly to help their patients and families find peace. From our unmatched referral response times to our focus on quality improvement, the most beautifully complicated time of your life is our life's work. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.#Erie1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Manufacturing Req ID:26481 SummaryLincoln Electric is growing the Plant Engineering team and has outstanding opportunities for an experienced Electrical Engineering Technologist. Our Plant Engineering team is responsible for implementing capital projects and providing engineering support for the Consumable and Machine divisions of Cleveland Operations. Electrical Engineering Technologists play a crucial role in designing the electrical systems for equipment used in manufacturing welding machines and consumables, ensuring that the production floor equipment adheres to corporate objectives related to safety, health, productivity, quality, and continuous improvement.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoAs an Electrical Engineering Technologist, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include:Modify solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives.Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance.Maintain, modify and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer.Update and support National Instruments LabVIEW code for testing applications and equipment.Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects.Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation.Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations.Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience.Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations.Integrate equipment into data collection systems and establish network topologies.Support network backup, device patching management, and control system asset inventory.Compile data from connected devices for organizational use and develop standards for control systems hardware and software.Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company’s 2025 Higher Standard Goals.Education & Experience RequirementsMinimum of a Bachelor's degree in Electrical Engineering Technology with 3+ years of professional experience.Experience with AutoCAD Electrical CAD software.Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW.Knowledge of NFPA 70, 70E, and 79, and other technical codes.Knowledge of basic networking concepts and SQL Database.SkillsDemonstrate initiative and accept responsibilities with minimal supervision.Strong ownership and results-driven mindset.Good judgment, self-motivation, and safety consciousness.Excellent organizational skills.Superior written and oral communication abilities.Adaptability to handle diverse assignments and changing priorities.Hands-on work capability and effective collaboration on the shop floor.Critical thinking and exceptional problem-solving skills.Proficiency in supporting and troubleshooting industrial equipment.Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required.Effective teamwork with employees at all organizational levels.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Respiratory Therapist - ICUWe are seeking a skilled and compassionate Respiratory Therapist to join our Intensive Care Unit (ICU) team. In this role, you will provide critical respiratory care to patients with severe breathing disorders or life-threatening conditions, ensuring optimal outcomes through advanced therapeutic interventions.Key Responsibilities:Assess, treat, and monitor patients with acute or chronic respiratory conditions in the ICU setting.Initiate and manage mechanical ventilation and other life-support systems for critically ill patients.Administer aerosol medications, oxygen therapy, and other respiratory treatments as prescribed.Perform diagnostic tests such as arterial blood gas analysis and pulmonary function testing to evaluate lung performance.Collaborate with physicians, nurses, and other healthcare professionals to develop and implement individualized care plans.Respond to emergency situations, including rapid response or code blue events, to provide airway management and support.Maintain accurate patient records and document all treatments and progress in compliance with hospital policies.Educate patients and families on respiratory care techniques and equipment use when transitioning out of the ICU.Work Environment:Work in a fast-paced ICU environment that requires critical thinking and quick decision-making skills.Collaborate closely with a multidisciplinary team dedicated to providing life-saving care.Be prepared for rotating shifts, including nights, weekends, and holidays, as required in critical care settings.Benefits:Competitive salary and comprehensive benefits package.Opportunities for professional growth through specialized training and certifications in critical care.A supportive work environment that values teamwork and innovation in patient care delivery.*This information is based on the Bureau of Labor Statistics (BLS). Actual job responsibilities may vary by location.*

Facilities Engineer If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Eastlake is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ WHAT WE OFFER Weekly Pay for Hourly EmployeesComprehensive Benefit PlansQuarterly Bonus Opportunity401k with Company MatchEmphasis on Employee EngagementPaid Holidays and Vacation TimeTuition ReimbursementOpportunities for Advancement JOB SUMMARY The Facilities Engineer works in conjunction with the Facilities & Maintenance Manager and the Maintenance Department. This position will play an active role in managing projects, providing facility and equipment engineering support, coordinating continuous improvement efforts, and engaging in capital expenditure (CapEx) processes. PRIMARY RESPONSIBILITIES Administer the PM /PDM program for all equipment, building and facilities through the Computerized Maintenance Management System (CMMS)Perform analyses to determine the root cause of critical and repetitive equipment failuresAnalyze equipment history and the line event data system to identify specific failuresProject Management, develop scope of work, cost estimates, project schedules, and provide updatesDevelop capital project, facility, and project drawings Manage small projects for operational efficiency and safety improvements, timely completion and budget complianceSupport on Capital Projects including managing sub-contractors, technical evaluations of work, schedule complianceEvaluate vendor contracts and service agreementsCollaborate with cross-functional teams to implement solutions that enhance maintenance efficiency, reduce downtime, and improve asset reliability QUALIFICATIONS Education: Bachelor’s degree in engineering or similar/relevant discipline preferred. Experience: 5 years technical working experience in maintenance/manufacturing or trades industry dealing with preventative and predictive maintenanceCertifications/Licenses: Solid Works/AutoCAD preferredOther Required Knowledge, Skills & Abilities:Effective oral and written communication skillsStrong analytical skillsProficient in Microsoft Office and CMMSStrong organizational skills and ability to define tasks with minimal supervisionAbility to protect confidential and sensitive information WORKING ENVIRONMENT Working Environment: Frequently on the shop floor in addition to an office setting.Physical Demands: Sitting/Standing for extended periods of time, able to lift up to 20lbs, extended periods of time using a computer screen.Required PPE: Check for required PPE in areas you may be working.Safety Glasses: Needed in all areas of the plant.Steel Toed Shoes: Needed in all areas of the plant. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a full time position

OverviewSalon Manager (BTC 1)At JCPenney Salon, our leaders are dedicated to guiding their teams to success by developing their stylists and delivering an exceptional client experience every day. As a behind the chair salon manager, you may work up to 8 hours per week behind the chair (depending on salon volume) with your own clientele, alongside your team. Additionally, leaders coach and motivate your team to becoming the top salon professionals in America; while supporting the business to drive retail and service results through creative marketing, networking, and promoting client loyalty. Our salon business is a key driver of traffic and revenue for the JCPenney company. As a leader you will represent the company values we uphold every day to make it count for our customers. Come see what it means to work with a family at the JCPenney Salon!Primary Responsibilities:Client ExperienceLeads by example in all interactions with clients, and supports stylists to ensure they can provide an exceptional client experienceCreates an environment that inspires associates to build client loyalty by providing coaching and feedback to ensure consistent execution of theMotivates and engages the team to provide exceptional service through consistent communication, coaching and recognitionProvides services including but not limited to cut/style, chemical services for all hair types, and performs other hair styling services as required to meet or exceed the client’s expectations in a positive, professional mannerTeam DevelopmentProactively recruits qualified stylists to join team through the use of Social Media, targeted Recruiting Websites, Referrals and engaging Stylists at local Salons and Cosmetology SchoolsProvides coaching and feedback that is frequent, balanced, meaningful and improves effectivenessCreates opportunities for learning that drive associate success throughout their careerEnsures stylists complete available training by scheduling Associates for Core and Artistic Education as courses are offered internallyInspires loyalty, passion, and growth in the salon by creating an environment that is inclusive, respectful, professional and funBusiness PerformanceReviews reports to quickly identify and prioritize areas of opportunity in the salon, determines root cause of the opportunity, and sets direction to achieve productivity – referral – rebooking – return rate and client acquisition standardsDelivers Salary Cost objectives to achieve profit planMerchandisingReviews SET guidance and makes appropriate adjustments based on salon layout while maintaining core standards in SalonActively walks the salon and backbar to identify opportunities related to merchandising, replenishment, and recoveryHandles or directs salon team to address product related issues that have biggest impact to the clientManages backbar expenses to planPerformance Standards / ProgramsConsistently meets established performance standards for the role, including (but not limited to) product and service sales, client experience, productivity, and attendanceReviews and follows all company programs (including but not limited to) hiring practices and state safety regulations, and accurately advises salon associates on how to address any related issuesCosmetology LicenseA current cosmetology license is required in the state you are applying. Core Competencies:Prioritizes customersFocuses team efforts on superior customer service and a quality salon client experience, with the goal of rebooking. Make the client feel at home by providing a thorough consultation, prioritizing their time and services, and recommending appropriate retail. Also, meeting the needs of salon associates by valuing the need for work like balance and prioritizing important experiences in and out of the workplace.Takes accountabilityHolds the team accountable for performance and empowers individuals to do the same for themselves. Actively manage and understand what is happening in your salon and lead by example. Equip your team with the tools and skills they need to be successful on the job; and then celebrate your associate wins and encourage them to have pride in their work accomplishments.Produces resultsEstablish goals and explain how success will be measured for each area of responsibility. Prioritize work and remain adaptable to change as new challenges arise. Motivate the team to stay focused on driving team and company results to reach quarterly and annual goals.What you get:In addition to a competitive wage, this position offers 50% commission on service sales behind the chair and 10% commission on retail sold with a service.Eligible for bonus under the Management Incentive Plan.If eligible, we offer a competitive benefits package including medical/dental/vision, term life insurance, paid vacation/holidays*, and 401(k) with Company match. All associates are eligible for an associate discount on JCPenney merchandise. For paid holidays, associates who are eligible for paid vacation (MTO) are also eligible for eight paid holidays during the calendar year. All store hourly associates scheduled to work on a designated holiday will receive additional compensation. *For paid vacation days, as well as eligibility requirements for other benefits, please visit www.yourjcpbenefits.com.About JCPenney:JCPenney is the shopping destination for diverse, working American families. With inclusivity at its core, the Company's product assortment meets customers' everyday needs and helps them commemorate every special occasion with style, quality and value. JCPenney offers a broad portfolio of fashion, apparel, home, beauty and jewelry from national and private brands and provides personal services including salon, portrait and optical. The Company and its 50,000 associates worldwide serve customers where, when and how they want to shop - from jcp.com to more than 650 stores in the U.S. and Puerto Rico. In 2022, JCPenney celebrates 120 years as an iconic American brand by continuing its legacy of connecting with customers through shopping and community engagement. Pay RangeUSD $38,500.00 - USD $55,000.00 /Yr.

When you join our team as an Assistant Store Manager, you’ll take on key store management responsibilities including assisting with supervising day-to-day store activities, ensuring overall store performance, managing schedules, and developing operational action plans while identifying training opportunities to develop and grow the team. Position Type: Full-TimeAverage Hours: 38 hours per weekStarting Wage: $23.00 per hourWage Increase: Year 2 -$24.00 per hour Duties and Responsibilities:Must be able to perform duties with or without reasonable accommodation • Assists the direct leader with developing and implementing action plans to improve operating results• Establishes and communicates job responsibilities and performance expectations to their direct reports to ensure mutual understanding and desired results• Identifies training and development opportunities that will assist their direct reports in achieving enhanced performance• Understands the overarching company strategy, as well as communicates and models the core values of the organization, to create a sense of teamwork and membership among employees• Monitors the competitive environment within the community and informs the direct leader regarding adjustments necessary to maintain the company’s competitive position• Provides product feedback to the direct leader, including making recommendations regarding new items to carry or those that should be discontinued• Participates in the interviewing process for store personnel • Communicates information including weekly information, major team milestones, developments, and concerns• Ensures store personnel adhere to inventory procedures, product handling guidelines, and cash control policies to minimize losses• Ensures an appropriate resolution of operational customer concerns in their direct leader’s absence• Identifies and rectifies hazards, ensuring proper ergonomics and maintaining store equipment in proper working order• Maintains store cleanliness standards and proper store signage at all times• Assists the direct leader with maintaining proper stock levels through appropriate product ordering• Merchandises product neatly to maximize sales• Ensures the quality and freshness of products for sale and accuracy of product signage• Assists their direct leader with achieving the store payroll and total loss budget, inventory counts, and training new employees• Supervises the day-to-day operations of their team, escalating issues to the appropriate level of support and/or leadership when necessary• Ensures direct reports complete assigned responsibilities in a timely and effective manner to provide the highest level of customer service for the business• Complies with all established company policies and procedures while upholding the security and confidentiality of documents and data• Other duties as assigned Physical Demands: • Ability to stock merchandise from store receiving to shelving; ability to place product, weighing up to 45 pounds, on shelving at various heights• Regularly required to sit, stand, bend, reach, push, pull, lift, carry, and walk about the store• Must be able to perform duties with or without reasonable accommodations Job Qualifications: • You must be 18 years of age or older to be employed for this role at ALDI• Ability to work both independently and within a team environment• Ability to provide and lead others to provide prompt and courteous customer service• Ability to develop rapport, trust, and open communication that enhances the growth and job performance of direct reports • Ability to interpret and apply company policies and procedures• Ability to establish goals, guide employee performance to ensure the quality and completion of work assignments • Ability to evaluate and drive performance of self and others • Ability to understand and apply management principles concerning budgeting, personnel costs, and expenses• Ability to operate a cash register efficiently and accurately• Ability to safely and properly operate equipment, including electric/manual hand jack, floor scrubber, and cardboard baler and perform general cleaning duties to company standards• Excellent verbal and written communication skills• Ability to stay organized and multi-task in a professional and efficient manner, following instructions and giving attention to detail• Meets any state and local requirements for handling and selling alcoholic beverages Education and Experience: • High School Diploma or equivalent preferred• A minimum of 3 years of progressive experience in a retail environment• A combination of education and experience providing equivalent knowledge • Prior management experience preferredALDI offers competitive wages and benefits, including:401(k) PlanCompany 401(k) Matching ContributionsEmployee Assistance Program (EAP)PerkSpot National Discount Program In addition, eligible employees are offered:Medical, Prescription, Dental & Vision InsuranceGenerous Vacation Time & 7 Paid HolidaysUp to 6 Weeks Paid Parental Leave at 100% of payUp to 2 Weeks Paid Caregiver Leave at 100% of payShort and Long-Term Disability InsuranceLife, Dependent Life and AD&D InsuranceVoluntary Term Life InsuranceALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

Travel Physical Therapist (PT)Company: Fusion Medical StaffingLocation: Facility in Willoughby Hills, OhioJob DetailsFusion Medical Staffing is seeking a skilled Physical Therapist for a 13-week travel assignment in Willoughby Hills, Ohio. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team.Required Qualifications:Valid Physical Therapy license in compliance with state regulationsCurrent BLS certification (AHA/ARC)Preferred Qualifications:Doctorate degree in physical therapyPhysical Therapy experience, but New Grads are welcome to applyOther certifications or licenses may be required for this positionSummary:The Physical Therapist evaluates, diagnoses, and treats patients with physical impairments to improve mobility, reduce pain, and enhance quality of life. Working in settings such as hospitals, clinics, and rehabilitation centers, they create personalized, evidence-based treatment plans using exercise and manual therapy to help patients recover and become independent. This role requires strong clinical skills, effective communication, critical thinking, and a commitment to high-quality, safe patient care.Essential Work Functions:Evaluate patients’ physical conditions using standardized tests, clinical examinations, and patient history to identify functional limitations and treatment needDevelop personalized rehabilitation programs based on assessment findings and patient goalsImplement physical therapy treatment plans using various techniques to improve patient mobility and reduce painOperate specialized physical therapy equipment and modalities safely and effectively, ensuring proper maintenance and calibration of devicesAssess patient progress, adjust treatment plans as necessary, and accurately document evaluations, interventions, and outcomes in the medical recordWork closely with physicians, nurses, occupational therapists, and other healthcare professionals to ensure coordinated care and optimize treatment outcomesEducate patients and caregivers on home exercise programs, proper body mechanics, injury prevention strategies, and self-management techniques to promote long-term functional recoveryMaintain a safe treatment environment by adhering to infection control protocols, safety guidelines, and regulatory standards while addressing patients’ comfort needs during therapy sessionsEngage in quality assurance initiatives and professional development activities to remain current with best practices in physical therapyCollaborate in discharge planning to ensure smooth transitions and continued patient progress in community or home-based settingsPerform other duties as assigned within scope of practiceRequired Essential Skills:Critical thinking, service excellence, and good interpersonal communication skills The ability to read, write, and communicate in the English language Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:Highly competitive pay for travel professionals Comprehensive medical, dental, and vision insurance with first day coverage Paid Time Off (PTO) after 1560 hours Life and Short-term disability offered 401(k) matching Aggressive Refer-a-friend Bonus Program 24/7 recruiter support Reimbursement for licensure and CEUsWhy Choose Fusion At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you.Other Duties Disclaimer:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice.Start your rewarding career as a Travel Physical Therapist (PT) with Fusion Medical Staffing and join our mission to improve lives. Apply now!*Fusion is an EOE/E-Verify Employer #pb1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Engineering Req ID:25583SummaryLincoln Electric is seeking a Mechanical Engineer for our Mentor, OH plant. The Mechanical Engineer with be a part of the Plant Engineering team. This team helps implements capital projects and provides engineering support for the Consumable and Machine divisions of the Cleveland Operations. Mechanical engineers are responsible for the mechanical aspects of the projects including facilities preparation, equipment designs and equipment installations. They also provide support for production and work on improvements to the existing equipment and facilities to improve health and safety, productivity, quality, and cost.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits!What You Will Do:Work in a team, hands on, environment on capital and strategic projects for the Cleveland Operation production facilities.Responsible for the mechanical aspects of the projects including facilities preparation, equipment design and equipment installation.Work on engineering solutions to improve equipment reliability and safety, lower operational and maintenance costs, and improve ergonomics.Engineer solutions that comply with ISO 14001 and EHS initiatives to improve the environmental & employee health & safety.Interface with all engineering, manufacturing and maintenance departments along with R&D, QA, and Supply Management to ensure accuracy of project design target details.Provide technical support to Production and Maintenance departments.Work with and often manage outside engineering and construction personnel.Ensure all safety, health, environmental, and compliance aspects for the project meet the appropriate regulations.Additional responsibilities as assigned by managers within the Plant Engineering department.Required Education & ExperienceBachelor degree in Mechanical Engineering.Minimum of 3+ years professional experience: Level II EngineerMinimum of 5+years professional experience: Level III EngineerMust have good judgment, be self-motivated and be safety conscious.Strong desire to take ownership and drive results.Ability to handle a variety of assignments and changing priorities.Ability to perform hands on work as required and work effectively on the shop floor with employees and processes.Ability to handle small to medium sized projects and day-to-day shop support with supervision.Experience with Solid Edge CAD modelling software is preferred.Knowledge of ISO 9001, ISO 14001, EPA and OSHA standards is preferred.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Physical Therapist Assistant (PTA) We are seeking a dedicated Physical Therapist Assistant (PTA) to support licensed physical therapists in providing therapeutic care. In this role, you will help patients improve mobility, strength, and overall functionality through tailored treatment plans. Key Responsibilities: Assist physical therapists in implementing treatment plans designed to meet individual patient needs.Guide patients through therapeutic exercises and activities aimed at improving mobility and strength.Monitor patient progress during therapy sessions and document findings for review by the supervising therapist.Educate patients and families on exercises or techniques to continue therapy at home.Maintain a clean and organized treatment area and ensure equipment is properly maintained. Work Environment: The role is based in various settings such as hospitals, outpatient clinics, or rehabilitation facilities.This position requires physical stamina as it involves assisting patients with mobility exercises throughout the day. Benefits: A competitive salary with opportunities for career growth within physical therapy settings.A comprehensive benefits package including health insurance, retirement savings plans, and paid time off.Access to continuing education programs to maintain certification and enhance skills as a PTA. Equal Opportunity Employer: Your commitment to improving patient outcomes is valued here. We strive to create an inclusive environment where all employees can thrive professionally while delivering exceptional care to our patients during their recovery journeys. *This information is based on the Bureau of Labor Statistics (BLS). Actual job responsibilities may vary by location.*

Description Licensed Practical NurseErie PAFounded in 1966, our commitment to our employees is expressed through our passion to put patients first; a culture that values and appreciates nurses; and our ongoing efforts to advocate for our employees in ways that elevate their profession and reward their sacrificial work. Join a nationwide network who have rediscovered the passion to help and care for people.Partner with Interim Healthcare, and you will experience the multiple benefits our company has to offer. Our placement services provide flexibility to accommodate your schedule and needs, offering contract, contract-to-hire and direct hire positions.Overview of Positions needed:1:1 with elementary age student, Monday - Friday throughout the school day and am & pm bus route with student.1:1 with high school student, Monday - Friday. Am and pm bus route w/student possible.Compensation: $33Job Responsibilities:Care for patients with a variety of illnesses, injuries and diseases in facilities such as medical offices, assisted living facilities, hospitals, and schools – under the supervision of an RN.Work with a team of physicians, RNs, CNAs, and aides to deliver excellent patient care.Take patient vitals, do assessments, document progress and report changes to RN Supervisor.Assist RN in carrying out physician’s orders, patient care and prescribed treatments.Administer medication, operate medical equipment and maintain a safe environment.Requirements:Graduate of an accredited practical nursing program and active LPN License in PA.CPR CertificationKnowledge of any state and federal healthcare laws and regulations.Demonstrates clinical proficiency, critical thinking skills, good communication, and compassionate.Benefits:Weekly payHoliday PayReferral bonusEmployee assistance programsMedical benefitsDental benefitsVision benefitsAVA RewardsDaily PayApply Today!#FS2

Automation & Controls Engineer If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Eastlake is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ WHAT WE OFFER Weekly Pay for Hourly EmployeesComprehensive Benefit PlansQuarterly Bonus Opportunity401k with Company MatchEmphasis on Employee EngagementPaid Holidays and Vacation TimeTuition ReimbursementOpportunities for Advancement JOB SUMMARY As an Automation Engineer at CPP, you will be responsible for designing, programming, maintaining, and troubleshooting PLC control systems in an aerospace investment casting manufacturing environment. A strong background in ladder logic programming is required, and experience with robotics (specifically Fanuc and Kawasaki) and ignition programming is highly beneficial but not mandatory. The ideal candidate will contribute to the efficient operation, optimization, and continuous improvement of automated manufacturing systems. You will collaborate with cross-functional teams to enhance process efficiency, improve quality, and reduce costs, ensuring that CPP continues to meet the demanding standards of the aerospace market. PRIMARY RESPONSIBILITIES Design, develop, implement, and maintain automation systems to improve efficiency and consistency in the investment casting process.Program, configure, troubleshoot, and improve robotic systems, PLCs, and other automated equipment to ensure efficient and reliable operations.Diagnose and resolve issues related to PLC-controlled systems, sensors, motors, actuators, and other automated machinery.Identify and implement improvements to automation systems to enhance efficiency, reduce downtime, and optimize production processes. Work closely with production teams to implement upgrades and process enhancements.Collaborate with engineering, production, and maintenance teams to ensure seamless integration of automated systems.Develop and maintain documentation, including system designs, programming files, and operating procedures.Provide training and technical support to maintenance teams and operators on PLC programming, control system troubleshooting, and automation systems as needed.Stay current with advancements in automation technologies and apply innovative solutions to CPP processes.Support root cause analysis and continuous improvement initiatives to resolve production challenges.Provides manufacturing engineering information by answering questions and requests.Completes design and development projects by training and guiding technicians.Responsible for adherence to all safety policies, practices and procedures.Robotics Support (Beneficial not required): Assist with the programming, integration, and troubleshooting of robotic systems (Fanuc and Kawasaki). Ensure seamless interaction between robots and PLC-controlled systems to optimize production.Ignition Programming (Beneficial not required): Support the development and troubleshooting of ignition systems used in casting operations. Provide programming expertise to maintain ignition systems.Ability to work flexible hours as needed. QUALIFICATIONS Education: Bachelor’s degree in Automation Engineering, Mechanical Engineering, Electrical Engineering, or a related field.Experience: 3+ years of experience in automation engineering, preferably in investment casting or a similar manufacturing environmentPLC Programming: Strong experience in PLC programming with an emphasis on ladder logic. Hands-on experience with Allen-Bradley or similar PLC platforms is required. Automation Systems Experience: Solid experience with automation systems, including sensors, actuators, motors, drives, and other equipment used in systems. Experience with SCADA systems and HMI programming.Problem-Solving Skills: Strong troubleshooting and problem-solving skills with the ability to diagnose and resolve complex issues in automation systems, PLCs, and robotics.Communication Skills: Excellent written and verbal communication skills. Ability to collaborate with cross-functional teams and provide training to operators and maintenance personnel.Safety Focus: Knowledge of safety regulations and best practices in manufacturing environments, especially related to electrical systems and automation.Robotics Experience (Beneficial not required): Hands-on experience with Fanuc and Kawasaki robotic systems for integration, programming, and troubleshooting is highly beneficial.Ignition Programming (Beneficial not required): Knowledge or experience with ignition systems, programming, and troubleshooting within aerospace or manufacturing environments is a plus. WORKING ENVIRONMENT Working Environment: Shop floor, office.Physical Demands: Sitting or standing long periods of time, may be required to lift Metal castings up to 50 lbs; extended periods of time using a computer screen.Required PPE: PPE varies throughout the plant, check with area Supervisor to ensure proper PPE is being used.Travel Requirements: May be required to travel to other sites, as needed.Safety Glasses: Needed in all areas of the plant.Steel toe shoes: Needed in all areas of the plant. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment.Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a full time position

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:26401 SummaryLincoln electric has an outstanding opportunity for a Control Systems Engineer at our Cleveland, Ohio headquarters. The Control Systems Engineer is a key member of the Plant Engineering team that implementsprojects and provides support for the Consumable division of the Cleveland Operations. Control System Engineers are responsible for the physical machine hardware used in manufacturing, the networks that connect them, and the software controlling them.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoResponsible for the control systems including hardware design, software design, design documentation,networking, and data acquisition.Work closely with the Plant Engineering, MES, IT, Maintenance, and Production teams to support production and facility projects that involve networking, PLCs, HMIs, and associated software.Collaborate with multiple Operations teams to meet current and future continuous improvement project goals.Estimates time and cost for new projects.Reviews capital equipment proposals and quotations to ensure equipment meets company specifications for control systems.Provides on-site assistance troubleshooting and remediating hardware, software, and network issues with Plant Engineering, Maintenance, and IT team members.Reduce downtime on production equipment due to issues with the control system.Support network backup and device patching management process.Assist in management and inventory of control system assets including software, servers, devices, and workstations.Improve system and maintenance performance based on availability and reliability.Review security vulnerabilities and request appropriate remediation form respective teams.Compiling data from connected devices and making it available to the users throughout the organization.Develops and applies standards for control systems hardware and software.Solves complex problems; takes a new perspective on existing solutions.Works independently; receives minimal guidance.May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives.Acts as a resource for colleagues with less experience.Assumes additional responsibilities as assigned to support Lincoln Electric Company’s 2025 Higher StandardStrategyEducation & Experience RequirementsMinimum of a Bachelor's degree in Electrical Engineering.Minimum of 5 years professional experience.Experience with automation hardware and software platforms, including PLC and HMI.Experience with AutoCAD.Knowledge of NEC, NFPA, 70E, NFPA 79, and other technical codes.Ability to support and troubleshoot industrial equipment.Critical thinking with exceptional problem-solving skills.Ability to handle a variety of assignment and changing priorities.Work effectively with employees on all levels of the organization.Provide excellent written and oral communications.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Description School Nurse - Licensed Practical NurseWaterford, PAFounded in 1966, our commitment to our employees is expressed through our passion to put patients first; a culture that values and appreciates nurses; and our ongoing efforts to advocate for our employees in ways that elevate their profession and reward their sacrificial work. Join a nationwide network who have rediscovered the passion to help and care for people.Partner with Interim Healthcare, and you will experience the multiple benefits our company has to offer. Our placement services provide flexibility to accommodate your schedule and needs, offering contract, contract-to-hire and direct hire positions.Overview: Bus support on Mon, Tues and Fri from 1:45p-5pCompensation: $29/hourlyJob Responsibilities:Educating students on hygiene and safety practicesDispensing prescription medications to students per physician instructionsTaking students’ temperatures when fever is suspectedAdministering first aid and CPRTreating minor injuries such as cuts, scrapes, and bruisesContacting parents when students are ill or injuredRequirements:Graduate of an accredited practical nursing program and active LPN License in PA.CPR CertificationKnowledge of any state and federal healthcare laws and regulations.Demonstrates clinical proficiency, critical thinking skills, good communication, and compassionate.Benefits:Weekly payHoliday PayReferral bonusEmployee assistance programsMedical benefitsDental benefitsVision benefitsAVA RewardsInterim HealthCare provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, gender, religion, sexual orientation, national origin, age, disability or veteran status.#FS2

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:26350 SummaryLincoln Electric has an outstanding opportunity for a Plant Electrical Engineer supporting our Plant Engineering Facility Team. This team leads the implementation of capital projects and is responsible for planning, executing, and maintaining plant-wide infrastructure, as well as providing technical support for building and maintenance operations.As a Plant Engineer, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoCollaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas.Take responsibility for the electrical aspects of projects, which may include design, documentation, equipment installation, project management, and support.Develop engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks.Create and maintain sustainable documentation for use by engineering and maintenance teams.Design solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards.Provide capital cost estimates and establish project timelines to ensure successful completion of project work.Review equipment quotations to confirm compliance with desired specifications.Deliver technical support to the Production and Maintenance departments.Coordinate and interface with engineering, production, maintenance, and procurement teams.Work closely with and often manage outside engineering and construction personnel.Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations.Perform additional responsibilities as assigned by managers within the Plant Engineering department.Education & Experience RequirementsFor level II: Bachelor’s degree in Electrical Engineering with a minimum of 3 years of experience.For level III:Bachelor’s degree in Electrical Engineering with a minimum of 5 years of experience.Strong desire to take ownership of tasks and deliver results.Excellent problem-solving and troubleshooting abilities.Demonstrates good judgment, self-motivation, and a commitment to safety.Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines.Flexibility to handle diverse assignments and adapt to changing priorities.Capability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes.Knowledge of NEC, NFPA, 70E, NFPA 79, and other technical codes.Experience with 2D CAD modeling; familiarity with AutoCAD/Vault is preferred.Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Manufacturing Req ID:26336 Job ResponsibilitiesLincoln Electric has an outstanding opportunity for an experienced Plant Engineer. Plant Engineering is the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today.As a Plant Engineer, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will Do• Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. • Take responsibility for the mechanical aspects of projects, which may include design, documentation, equipment installation, project management, and support. • Develop engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. • Create and maintain sustainable documentation for use by engineering and maintenance teams. • Design solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. • Provide capital cost estimates and establish project timelines to ensure successful completion of project work. • Specify and solicit equipment quotations to confirm compliance with desired specifications. • Deliver technical support to the Production and Maintenance departments. • Coordinate and interface with process engineering, production, maintenance, and supply management teams. • Work closely with and often manage outside engineering and construction personnel. • Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. • Perform additional responsibilities as assigned by managers within the Plant Engineering department. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Bachelor’s degree in Mechanical Engineering with a minimum of 3 years of experience. • Strong desire to take ownership of tasks and deliver results. • Excellent problem-solving and troubleshooting abilities. • Demonstrates good judgment, self-motivation, and a commitment to safety. • Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. • Flexibility to handle diverse assignments and adapt to changing priorities. • Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. • Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. • Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Manufacturing Req ID:26334 SummaryLincoln Electric has a terrific opportunity for a Plant Mechanical Engineering Technologist supporting our Cleveland operation. The Plant Mechanical Engineering Technologist supports the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today.As a Plant Technologist, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will Do• Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. • Take responsibility for the mechanical aspects of projects, which may include documentation, equipment installation, project management, and support. • Implement engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. • Create and maintain sustainable documentation for use by engineering and maintenance teams. • Implement solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. • Provide capital cost estimates and establish project timelines to ensure successful completion of project work. • Review equipment quotations to confirm compliance with desired specifications. • Deliver technical support to the Production and Maintenance departments. • Coordinate and interface with engineering, production, maintenance, and supply management teams. • Work closely with and often manage outside engineering and construction personnel. • Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. • Provide support for various tasks as directed by Plant Engineering managers to ensure efficient operations. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Bachelor’s degree in Engineering Technology (Mechanical) with a minimum of 3 years of experience, OR • Associate's degree in related fields with 5 years of experience, OR • High school diploma/GED with 10 years of relevant experienceAdditional requirements include:• Strong desire to take ownership of tasks and deliver results. • Excellent problem-solving and troubleshooting abilities. • Demonstrates good judgment, self-motivation, and a commitment to safety. • Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. • Flexibility to handle diverse assignments and adapt to changing priorities. • Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. • Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. • Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Quality Assurance/Control Req ID:26107 SummaryLincoln Electric has an outstanding opportunity for a Quality Assurance Engineer who will implement projects and other quality related activities for our Euclid and Mentor Consumable Division Quality Assurance. Reporting directly to the Quality Assurance Manager, you will play a key role in identifying quality problems or potential quality problems, perform effective Problem Definition and Root Cause Analysis.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoInitiate corrective/preventive actions (CAPA) and verify the effectiveness of those actions. Drive CAPA’s to effective closure in a timely manner.Address customer warranty issues and effectively complete customer specific corrective action requests.Create and sustain standard printouts for TVM Boards. Provide additional support as the QA Representative.Provide support for new products, new equipment installs or process improvements:Provide permission note support to R&D and provide data as required for the development of new products.Work with Methods Engineering on process improvement initiatives.Drive or participate in effective FMEA’s, establish proper control plans and audit frequencies.Serve as the subject matter expert in analytical and testing equipment to maximize the effectiveness of existing equipment while investigating and pursuing advances in technology for continuous improvement.Reduce process variation using CI, Six Sigma, and other tools to improve the quality of products and reduce scrap.Manage the Quality Near Miss system. Evaluate the submitted Quality Near Misses and evaluate if additional action is needed for continuous improvement.Development and implementation of in-line monitoring systems/solutions for quality check-points.Utilize MES data to develop process control charts, process capability studies, etc. for new/existing processes. Develop new & update existing work instructions, specifications & procedures.Monitor the process audit program. Analyze outcome to determine if a CAPA or CI project is required.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience RequirementsBachelors of Science in Engineering required.Qualified candidates will have 1 - 5+ years’ experience minimum depending on level.Experience in manufacturing required with a solid technical background.Must demonstrate good judgment when evaluating quality related situations.Must work well with those in inspection, R&D, production, and supervision.Knowledge of Consumable Division products, processes, specifications and procedures is preferred.Willing to undergo the necessary training to obtain QA Engineer certification.Must be willing to travel to customer sites as necessary to solve quality related issues.Completion of Six Sigma training and a Red Belt or Black Belt project or willing to undergo the necessary training. Six Sigma preferredMust possess excellent communication skills particularly in technical areas.Proficient in Apriso and SAP.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($88,600.00- $146,200.00) Target Bonus: % Req ID:27085 PurposeLincoln Electric is seeking a skilled and motivated Product Cybersecurity Engineer to lead the development and implementation of a comprehensive product security program within the R&D department. This role will be instrumental in enhancing the cybersecurity posture of our software-driven products, including embedded systems and cloud-connected platforms. The ideal candidate will enhance R&D capabilities to identify and mitigate security risks, embed security best practices into every phase of the Secure Software Development Lifecycle (SSDLC), standardize threat modeling and risk assessment practices, and work cross-functionally with IT to address key gaps identified in our product security assessment.Job Duties and ResponsibilitiesProgram Development and GovernanceEstablish and operationalize a formal Product Security Program aligned with corporate SDLC and Secure Design standards and best practicesCollaborate with engineering, IT, and compliance teams to define and enforce security requirements across product linesDevelop and maintain security policies, procedures, and technical standards for product developmentStay current with emerging security threats, vulnerabilities, and mitigation techniques and update/evolve program and governance accordinglyThreat Modeling and Secure DesignLead and standardize threat modeling activities using methodologies such as STRIDE, PASTA, or LINDDUNAssist with security architecture reviews and design analysis for new and existing productsStandardize guidelines for documentation of data flows, trust boundaries, attack surfaces, and security controlsSecure Development Lifecycle IntegrationOperationalize a formal Secure Development Lifecycle with security tools and practices (e.g., SAST, DAST, SBOM, secrets scanning) into CI/CD pipelinesEnsure secure coding practices are followed and validated through peer reviews and automated testingSupport the development of secure signing, secure boot, and credential management processesProvide guidance on secure coding practices and conduct security training for developersDevelop and maintain security tools, libraries, and automation to support secure development practicesVulnerability and Risk ManagementImplement and manage vulnerability tracking, CVE remediation workflows, and SBOM maintenanceCoordinate with Testing and DevOps teams to ensure timely patching and secure deployment practicesRepresent R&D in incident response planning and product-related security investigationsParticipate in security assessments, including penetration testing and third-party auditsCustomer and Compliance EnablementWork with Product Management to establish standards for various product segmentsEnsure compliance with relevant standards and regulations (e.g., NIST, CCPA, GDPR, EU CRA, Trust Mark)Support audits, assessments, and customer security inquiriesInterpret evolving cybersecurity threats, regulatory changes, and industry trends to improve product security strategyStrategic Problem Solving and InnovationAnalyze technical and organizational challenges across product lines and propose scalable, secure solutionsCollaborate with cross-functional teams to identify systemic issues and recommend best practices that align with business goalsBasic RequirementsBachelor’s degree in Cybersecurity, Computer Science, Electrical Engineering, or related field.8+ years of experience in cybersecurity, with at least 2 years focused on product or embedded system security.Experience working in Agile/Scrum environments and familiarity with DevSecOps practices.Proficiency in threat modeling, secure coding, and vulnerability management.Hands-on experience with security tools such as SAST/DAST scanners, SBOM generators, and PKI systems.Familiarity with secure coding in C/C++, Python, Java, and embedded systems languages.Understanding of secure boot, firmware signing, and TPM-based authentication.Experience with embedded Linux, Yocto, and real-time operating systems (RTOS).Familiarity with cloud-native security, API security, and IoT device protection.Strong understanding of secure software development practices and common vulnerabilities (e.g., OWASP Top 10).Familiarity with CI/CD pipelines and DevSecOps practices.Certifications (Preferred): Certified Secure Software Lifecycle Professional (CSSLP), Certified Information Systems Security Professional (CISSP), Certified Secure Software Lifecycle Professional (CSSLP), or equivalent cybersecurity certifications.Strong communication and collaboration skills across technical and non-technical teams.Ability to lead cross-functional initiatives and drive cultural change around security.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.