We are looking for Flaggers to join our team!
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Paid Time Off · Health Benefits Day One · 401K Match · No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary The Maintenance Technician can perform a wide variety of work to ensure that the facilities and equipment are maintained in safe and effective working conditions. Responsibilities include but are not limited to, performing work in all operational and Facilities areas, depending upon the immediate needs of the department. While Maintenance Technicians may have developed skills in one or more areas, all are expected to be able to perform general maintenance and repair in all areas of assignment, which may include equipment, motor, and conveyor repair and maintenance as well as building maintenance including lighting, electrical, and plumbing in any of the distribution centers. Responsibilities Ability to read and comprehend technical manuals, schematics, and blueprintsAbility to use electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing)Ability to work as a team member by interacting and communicating with co-workers and managers in a collaborative and constructive mannerWorks with Supervisor to mentor/develop team and Tech’s in trainingWork with Vendors aligned to facilitiesAbility to multi-taskAbility to change load wheels on power equipmentAbility to troubleshoot and repair low and high voltage controls including fuses, relays, wiringMaintains building, equipment, shop, and storage areas in a clean and orderly conditionCompletes work orders for work performed and includes parts and inventory usedDocument all work order activities to comply with MP2 requirements, providing documented records of the activities performedFollow lockout-tag-out procedures, confined space procedures, and other safety and environmental procedures and policies as requiredExperience working in maintenance in a distribution center settingBuilding conveyor maintenance experience requiredQualifications & Experience Possession of a valid driver’s license and a satisfactory driving record.Prior maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenance.Electrical experience with high and low voltage, AC and DC.Technical school or training desired.Computer skills navigating email/Microsoft SuiteKnowledge of mechanical and electrical drawings.Proven track record of strong mechanical and electrical troubleshooting.Welding skill preferred, but not required.Multiple shifts and locations available Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business ResultsBenefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer. We do not make employment decisions based on an individual’s race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all role(s) are filled.

$23.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. ColumbusOhioUnited States of America

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today!Job DetailsSign on Bonus: $2,500Shift Hours:Monday-Friday 10pm-6:30amThis position is located onsite at our facility in Lockbourne, OH. There is no option for remote or hybrid work. Under general supervision of the Systems Manager, responsible for supporting the effective use and functionality of the automated equipment within a fully automated Distribution Center, while mentoring technician associates. In this role, the associate must use technical knowledge and skills to diagnose electrical controls issues to a component level, which includes diagnosis of capacitors, inductors, diodes, LED, and transistors. Diagnosis will include pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers. This position is responsible for programming basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs, properly wiring additional devices to PLC’s and other Controllers. An associate in this role will also troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus, work with device IP addressing, network switches, along with operation and diagnosis of all chill water plant systems including chillers, cooling towers, boilers, pumps, BAS, HVAC, and water treatment.Ensures effective preventative maintenance plans and schedules for all facility equipment and systems.Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately.Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls.Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications.Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations.Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center.Manages the inventory of spare parts.Must be willing to work extended hours, as needed, in order to meet productivity goals.Performs related duties as assigned.Education:Requires some technical vocational training, or equivalent combination of experience and education. Normally requires at least two (2) years related and progressively responsible experience; strong electrical background preferred.Skills and Knowledge:Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities.Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI’s, PLC Inputs/Outputs.Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scannersAbility to program basic changes to PLC controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other controllers.Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.Technical knowledge and skills include the diagnosing of electrical control issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.Positions at this level are generally fully functioning specialists in a PLC/Electrical control trade area.Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as PROFIBUS, BACNET, LONWORKS, PROFINET, CAN-BUS, ASI, Etc. Skills to include an understanding of device IP addressing, network switches, etc.Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatmentStrong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements.Technical knowledge and skills include the diagnosing of electrical Controls issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.Ability to program basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other Controllers.Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus. Skills to include an understanding of device IP addressing, network switches, etc.Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatmentAbility to mentor other technicians.Ability to communicate effectively both orally and in writingStrong interpersonal skillsStrong organizational skills; attention to detailWhat Cencora offersWe provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members’ ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit https://www.virtualfairhub.com/cencoraEqual Employment OpportunityCencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law.The company’s continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory.Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returnedAffiliated CompaniesAffiliated Companies: AmerisourceBergen Drug Corporation

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today!Job DetailsUnder the general supervision of the Maintenance Manager, the Project Lead Mechanic performs preventative, predictive and reactive maintenance on packaging equipment in the manufacturing area. Duties will include installation of new equipment, modifications and or upgrades to existing equipment and systems. This position will require strong interpersonal skills as well as the ability to train production and maintenance associates. This position is categorized as compliance critical and, as such, requires and is assigned specific responsibility for ensuring continual and proper compliance with all division, corporate and regulatory requirements. It is the associate’s responsibility to observe all safety rules. Any condition thought to be hazardous or unsafe should be reported to your supervisor immediately.Responsibilities:Strong project management skills with ability to maintain schedules, manage vendors, and provide weekly progress updates.Ability to perform maintenance, installation of new equipment, lead projects, train productions and maintenance associates as needed.Strong interaction with vendors to ensure on time delivery, best pricing, cut sheets, data and manuals.Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements and adjustments on production equipment, conveyors, pumps, motors and pneumatic systems; following blueprints, diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.Competent ability to troubleshoot electrical and mechanical aspects of thermormers, cold formers, cartoners, printers, serialization equipment, check weighers, vision systems, labelers, and other packaging equipment.Experienced with high speed continuous and intermittent motion packaging equipmentAdheres to all cGMPs, safety regulations and Standard Operating Procedures.Maintains good housekeeping throughout the shift in the work areas.Works as a team member with other members of the AHP operations team to meet and/or exceed quality and production goals.Responsible for being an active participant in continuous improvement activities to promote improved efficiency and effectiveness of the production line. Takes initiative in proposing and driving continuous improvement activities in the production area.Must observe proper Lockout/Tag out and all safety procedures as requiredUnderstand maintenance principles and develop self and department work practices to promote a proactive environmentUnderstand and utilize drawings, diagrams and equipment manufactures instructionsTroubleshoot electrical controls, motor circuits, single and three phase electrical systems.Monitors equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies for repairs and projects.Ensures all change controls have been submitted and approvedThis position will require strong interpersonal skills with the facilities and purchasing groups.Supports the launch, development, and ongoing maintenance of a Computerized Maintenance Management System (CMMS)Place PO’s to order material and track project cost.Evaluate, track and leverage cost saving opportunities.Adheres to and operates under 5S principles/guidelines for the promotion of efficient and effective operations.Education:Requires Associates degree, completion of vocational program or certification in maintenance/technical discipline or equivalent preferred. Requires completion of a high school diploma, general education degree (GED) or equivalent combination of experience and education. Minimum ten (10) years of manufacturing maintenance experience required. Preferred experience in pharmaceutical manufacturing or other regulated industry. Must have strong project management skills and an electrical and mechanical background with knowledge of generators, chillers, plc, air handling units, roof top air conditioning, pneumatics, clean room environment.Skills and Knowledge:Previous Blister Machine maintenance experience is a required.Ability to read and understand the English language for the purpose of reading documents, product labels and instructions.Must possess basic mathematical skills.Strong interpersonal skills; ability to develop and maintain cooperative working relationships with others.Strong organizational skills; detail oriented.Ability to use good judgment in order to carry out detailed instructions.Complete technical and operational knowledge of industrial mechanical components and systems. (Bearings, Pumps, Piping, pneumatics, carpentry, facility integrityetc)Complete technical and operational knowledge of industrial electrical and electronic equipment and systems. (single phase motors, 3-ph motors, AC Control equipment, DC control equipment, batteries and DC circuits, NFPA 70e, electrical measuring equipment, power supplies.etc.)Complete understanding to troubleshoot complex automated systems controlled by computers, programmable logic controllers (PLCs) and microprocessors in a high-volume work environment.Safe operating practice training for power tools and powered equipmentComplete Metal work capabilities. (measuring, cutting, arc welding, oxyfuel welding, tig welding..etc)Ability to read, interpret, and create CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.Capable of creating project cost and project analysis reports.Strong Project Management abilitiesStrong organizational skills; attention to detailStrong prioritization and scheduling abilitiesStrong aptitude for repair and maintenance activitiesAbility to communicate effectively both orally and in writingStrong interpersonal and communication skills to maintain cooperative working environmentStrong analytical skillsKnowledge of Microsoft Office and knowledge of CAD preferred.Excellent problem solving skills; ability to resolve issues effectively and efficientlyKnowledge of building automation systems such as BacktalkProactive problem solving skills; ability to recommend and implement solutionsAbility to operate independently, to multi-task, and to prioritize quicklyAbility to coach and train Maintenance Associates in all aspects of work scopeAbility to inspect work of Maintenance AssociatesTrained and capable of assessing safety conditions and communicate corrective measuresAbility to make recommendations to improve service delivery based on customer feedbackWhat Cencora offersWe provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members’ ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit https://www.virtualfairhub.com/cencoraEqual Employment OpportunityCencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law.The company’s continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory.Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returnedAffiliated CompaniesAffiliated Companies: Amerisource Health Services, LLC

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Critical Power Solutions Division (CPSD). Schedule technical sales or service support for customers including emergency service calls. Essential Functions Perform on-site customer service of CPSD products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other CPSD departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades). Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures. Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. Further the goals and a positive image of CPSD by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. Qualifications Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawings.Advanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

What this job involves -The Maintenance Technician supports operation, inspection, and maintenance processes to mechanical, electrical, plumbing and kitchen equipment and systems in assigned facilities. Assists Mobile Engineers (HVAC/R) and Control Systems Technicians in maintenance and repair efforts, as well as independently performing defined tasks.What is your day to day Assist the operations team in the maintenance and repair of building and equipmentGeneral interior maintenance – HVAC/R coil cleaning, evaporator coil cleaning, kitchen equipment maintenance (meat grinder, cuber, meat saw, slicers, etc.).Minor plumbing repairsMaintain lighting system bulbs and ballastsCompletes special tasks that include but are not limited to; painting, locksmith work, tenant services requests, and general maintenance as assigned.This position requires the employee to be on call for after-hours emergencies.Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Participate in ongoing technical, safety, and operational process training programsDocuments work performance and materials procurement as directed.Desired experience and technical skillsRequired:High school diploma or GED equivalentClass B UST CertificationCandidate must possess and maintain a valid state driver’s license.Completion of an applicable technical training program is desirable, have a minimum of one (1) year of applicable working experience in general building repair and maintenance, basic plumbing, and basic electrical.Must have ability to lift a minimum of 80 lbs., use ladders up to 30 ft, and possess mechanical and electrical aptitude.Must pass background, drug/alcohol, and MVR screening process.Experience and technical skills Preferred:Ability to comply with both Jones Lang LaSalle and client-directed Policies & Procedures.Successful candidate must be a self-motivated individual who can work independently or in a team environment.#HVACjobs#MHVACjobs

Are you looking for an opportunity to work in the dynamic world of retail merchandising Retail Odyssey is currently seeking Retail Reset Merchandisers to join our team. As a Retail Odyssey Merchandiser, you will play a crucial role in enhancing the shopping experience for customers within the nationwide Kroger family of brands. You will utilize your basic merchandising skills to reset shelves, tag products, build eye-catching displays, ensure product facing, and rotate stock efficiently. Your keen eye for detail will be essential in maintaining the visual appeal of the grocery stores, ensuring products are well-presented, and displays are aesthetically pleasing.What you get:Competitive wage; $14.00 per hourEarly morning weekday hours, allowing you to maintain a healthy work-life balance with no weekend commitmentsAdditional hours may be available upon requestPaid training, equipping you with the necessary skills and knowledge to excel in your rolePaid mileage and travel reimbursement when applicableWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and online discountsNow, about you:You’re18years or olderHave reliable transportation and a valid driver’s license You enjoy physical work of moving, bending, standing, squatting and can lift up to 50 lbs. Are open to visiting multiple stores in a weekHave excellent communication skills to effectively interact with team members, store staff, and customersClick video link hereto see our team in action.If you are passionate about retail, have a great eye for detail, and enjoy creating visually appealing displays, we invite you to apply to this opportunity. Join us at Retail Odyssey and be a part of a dedicated team committed to delivering exceptional merchandising services to our clients’ customers.Click Apply Now to start your rewarding journey with Retail Odyssey!

Who We Are:High Tech Locksmiths (HTL) is one of the largest mobile automotive locksmith services of its kind in the U.S. HTL provides transponder, remote, high security, remotehead, smart key, and proximity keys for the auto auction, car rental, and used car industries.With more than 25 years in business, HTL dispatches its fleet of 100+ mobile units across 42 states to provide needed locksmith services onsite. These units, staffed by certified locksmiths, stocked with a full inventory of keys and remotes, and connected remotely to additional technical support, “cut” more than half a million keys each year.What We Offer:$20 per hour with Production and Quarterly incentives. Opportunities for overtime as well.Medical, dental, and vision benefitswith employer HSA contributions (US)Immediately vested 401K with company matchPaid Vacation, Personal, and Sick TimePaid maternity and paternity leave (US)Employer paid short-term disability and life insuranceEmployer paid Leap into Service Day to volunteerTuition Reimbursement for eligible programsOpportunities to expand your skill set and share your knowledge ross a publicly traded, global organizationCompany culture of internal promotions, diverse career paths, and rapid advancementWe’re Looking For:We are seeking a dedicated Automotive Locksmith responsible for locksmithing services at various locations within a designated territory. You will be part of a field team responsible for traveling to the client’s site and the generation and duplication of keys for automobiles, heavy duty trucks, motorcycles, etc. Whether you are a seasoned vet, new to the industry but willing to learn, or just a car enthusiast, this job is for you!You Are:Willing to learn.At HTL, we have an extensive training program to ensure you are equipped with the knowledge and tools needed to complete your daily tasks. Already have experience Great! We will show you how we do it best.Customer service focused. While your focus is on cutting keys, you will be representing HTL at our client’s locations. There you will have the opportunity to give a great impression and occasionally upsell current services.Communicative. As an automotive locksmith, you are often independent in your day-to-day functions. This requires you to have a strong work ethic and to maintain a high level of communication with your peers and leadership.You Will:Generate and duplicate keys for automobiles, heavy duty trucks, motorcycles, recreational vehicles and powersports.Use lockout kits / lishi tools to gain access to vehicles, remove immobilizer units, modules, ECUs, etc. Don’t know how We’ll train you!Effectively update core systems, customers, teammates, and management with detailed daily production reports.Must Have’s:A strong work ethic, we can teach you the rest.Excellent time management skills.A willingness to get and maintain an active locksmith license if you do not already have one. Training and studying materials supplied as needed to pass the necessary state locksmithing license testing.A valid driver’s license with a willingness to travel daily to various locations within your defined territory. Some overnight travel may be occasionally required.Willingness to work in an outdoor environment with varying weather conditions.Nice to Have’s:Mechanically inclined with automotive knowledge or work history.Sound like a match Apply Now - We can't wait to hear from you!

Come to work and be ready to think on your feet, grow your skills, and embrace the many opportunities. Our Distribution Centers are the key to getting new products out to TJ Maxx, Marshalls, HomeGoods, Sierra, Winners, Homesense, and TK Maxx. To keep up with our ever-changing inventory, we stay nimble and adaptable. No day is the same, and that’s just how we like it. Every shift is a new opportunity to Discover Different - and support each other along the way.Lead all aspects of the Maintenance Team (10-15 technicians) in our Marshalls.com facility. This Supervisor is responsible for the upkeep and repair of the equipment, building, and grounds-- specifically including the electrical, HVAC, conveyor hi-rackers, transporters, fire prevention equipment, and safety programs. Coordinates with local contractors and vendors to obtain high quality, cost effective service equipment.ResponsibilitiesSupervise a shift of 10-15 maintenance staffDevelop, counsel, motivate, and resolves associate relations issues. Provide a good working atmosphere. Conduct performance appraisals and monitor performance of all associates.Maintain efficiency and safety of all equipment. Monitor the daily operation and direct action as required.Coordinate daily maintenance of equipment. Consult with Maintenance Staff, Engineering, and Production-Personnel to determine future requirements.Coordinate with the Managers and Supervisors to establish priorities and schedule the work load to satisfy production needs.Coordinate with local contractors and vendors for equipment and services as required.Order parts and equipment and obtains services for repair and maintenance of the facility's equipment.Complete reports and perform other administrative duties as required.Qualifications:3-5 years of conveyor-systems experience within a distribution center.Strong knowledge of building codes, trade standards, and general practices within the maintenance industry.Solid understanding of electrical, mechanical, construction, plumbing, and HVAC.Minimum 2 years of supervisor experience supervising Mechanics.A formal education in desired/related field (at least a 2-year training program) is strongly preferred.College experience is helpful, but not required. Must be a High School graduate.Must have working proficiency in Microsoft ExcelBenefits include Associate discount; 401(k) match; medical/dental/vision; HSA; health care FSA; life insurance; short/long-term disability; paid holidays/vacation /sick/bereavement/parental leave; EAP; incentive programs for management; auto/home insurance discounts; tuition reimbursement; scholarship program; adoption/surrogacy assistance; smoking cessation; child care/cell phone discounts; pet/legal insurance; credit union; referral bonuses. All benefits are subject to applicable plan or program terms (including eligibility terms) and may change from time to time. Contact your TJX representative for more information. This position has a starting salary range of$61,000-78,100Come Discover Different at TJX - we think you’ll find that it’s so much more than a job. We move a lot of inventory - at all times of the day - and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.As you think about where to work, know that we take care of our people. We offer competitive pay and great benefits. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Paid Time Off · Health Benefits Day One · 401K Match · No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary The Maintenance Technician can perform a wide variety of work to ensure that the facilities and equipment are maintained in safe and effective working conditions. Responsibilities include but are not limited to, performing work in all operational and Facilities areas, depending upon the immediate needs of the department. While Maintenance Technicians may have developed skills in one or more areas, all are expected to be able to perform general maintenance and repair in all areas of assignment, which may include equipment, motor, and conveyor repair and maintenance as well as building maintenance including lighting, electrical, and plumbing in any of the distribution centers. Responsibilities Ability to read and comprehend technical manuals, schematics, and blueprintsAbility to use electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing)Ability to work as a team member by interacting and communicating with co-workers and managers in a collaborative and constructive mannerWorks with Supervisor to mentor/develop team and Tech’s in trainingWork with Vendors aligned to facilitiesAbility to multi-taskAbility to change load wheels on power equipmentAbility to troubleshoot and repair low and high voltage controls including fuses, relays, wiringMaintains building, equipment, shop, and storage areas in a clean and orderly conditionCompletes work orders for work performed and includes parts and inventory usedDocument all work order activities to comply with MP2 requirements, providing documented records of the activities performedFollow lockout-tag-out procedures, confined space procedures, and other safety and environmental procedures and policies as requiredExperience working in maintenance in a distribution center settingBuilding conveyor maintenance experience requiredQualifications & Experience Possession of a valid driver's license and a satisfactory driving recordPrior maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenanceElectrical experience with high and low voltage, AC and DCTechnical school or training desiredComputer skills navigating email/Microsoft SuiteKnowledge of mechanical and electrical drawingsProven track record of strong mechanical and electrical troubleshootingWelding skill preferred, but not required Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business ResultsBenefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. Visit bbwbenefits.com for details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer. We do not make employment decisions based on an individual’s race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all role(s) are filled.

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today!Job DetailsSign on Bonus: $2,500Shift: Monday-Friday 10pm-6:30amUnder general supervision of the Systems Manager, responsible for supporting the effective use and functionality of the automated equipment within a fully automated Distribution Center, while mentoring technician associates. In this role, the associate must use technical knowledge and skills to diagnose electrical controls issues to a component level, which includes diagnosis of capacitors, inductors, diodes, LED, and transistors. Diagnosis will include pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers. This position is responsible for programming basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs, properly wiring additional devices to PLC’s and other Controllers. An associate in this role will also troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus, work with device IP addressing, network switches, along with operation and diagnosis of all chill water plant systems including chillers, cooling towers, boilers, pumps, BAS, HVAC, and water treatment. Ensures effective preventative maintenance plans and schedules for all facility equipment and systems.Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately.Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls.Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications.Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations.Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center.Manages the inventory of spare parts.Must be willing to work extended hours, as needed, in order to meet productivity goals.Performs related duties as assigned.Education:Requires some technical vocational training, or equivalent combination of experience and education. Normally requires at least two (2) years related and progressively responsible experience; strong electrical background preferred.Skills and Knowledge:Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities.Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI’s, PLC Inputs/Outputs.Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scannersAbility to program basic changes to PLC controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other controllers.Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.Technical knowledge and skills include the diagnosing of electrical control issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.Positions at this level are generally fully functioning specialists in a PLC/Electrical control trade area.Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as PROFIBUS, BACNET, LONWORKS, PROFINET, CAN-BUS, ASI, Etc. Skills to include an understanding of device IP addressing, network switches, etc.Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatmentStrong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements.Technical knowledge and skills include the diagnosing of electrical Controls issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.Ability to program basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other Controllers.Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus. Skills to include an understanding of device IP addressing, network switches, etc.Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatmentAbility to mentor other technicians.Ability to communicate effectively both orally and in writingStrong interpersonal skillsStrong organizational skills; attention to detailWhat Cencora offersWe provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members’ ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit https://www.virtualfairhub.com/cencoraEqual Employment OpportunityCencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law.The company’s continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory.Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returnedAffiliated CompaniesAffiliated Companies: AmerisourceBergen Drug Corporation

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Critical Power Solutions Division (CPSD). Schedule technical sales or service support for customers including emergency service calls. Essential Functions Perform on-site customer service of CPSD products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other CPSD departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades). Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures. Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. Further the goals and a positive image of CPSD by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. Qualifications Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawings.Advanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

What this job involvesOperates, inspects, and maintains all HVAC, mechanical, electrical and plumbing equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc.What is your day to day Performance of ongoing preventive and repair response work orders on facility mechanical, electrical, and other installed systems, equipment, and other components.Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned buildings.Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations.Respond effectively to all emergencies.Prepare and submit to management summary reports listing conditions found in the performance of assigned work, and recommend and/or suggest action to be taken.Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in every day activities. This to include building automation systems, fire / life safety systems, and any other building related equipment.Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Maintain compliance to State, County, or City Ordinances, Codes, or Laws.Must be willing and able to support any after hours building related activity as required.Attend periodic training seminars.Other assigned operational tasks as may be typically expected of the Mobile Engineer role.Candidate will be provided tools required to perform assigned work scope.Desired experience and technical skillsRequiredUniversal EPA 608 CertificationMinimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of packaged HVAC, plumbing electrical equipment repair and maintenance.Candidate must possess and maintain a valid state driver’s licenseMust be able to lift up to 80 lbs. and climb up to 30 ft. ladders.Ability to perform on call duties and overtime as required.PreferredKnowledge of overall MEP/HVAC system design and application.Experience managing work orders, utilizing CMMS technologyExperience working in a service-related role, specific to commercial facilities.#HVACjobs

Join our team of Travel Retail Merchandisers! In this role, we handle product movement at retail. We display it, we move it, we track it; making sure stores and their product suppliers have the best opportunities for optimal sales. When you join the SAS Retail Services’ team as a Traveling Reset Merchandiser, you’ll be making a difference by ensuring the latest products match the newest plan. We’ve got a lot to offer with specialized training and growth opportunities. This is a traveling position that requires regular travel as a primary requirement of the role. Travel roles may require various degrees of travel up to 50% or more of the timeCompetitive Wage; $16.50 per hourPaid travel with overnight staysCompetitive wages with annual increase eligibilityGet paid quicker with early access to earned wagesPaid trainingGrowth opportunities– we pride ourselves on promoting from within (FT opportunities)We offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and online discounts.Now, about you:You’re 18 years or olderInterested in traveling within and outside of your home state, with overnight hotel staysHave reliable transportation and valid driver’s licenseYou can perform physical work of moving, bending, standing and can lift up to 50 lbs.Ready to jumpstart your professional career and/or fit your lifestyle needsClick here to learn more from our teamJoin us and see what’s possible for you! Click below to get started.

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Critical Power Solutions Division (CPSD). Schedule technical sales or service support for customers including emergency service calls. Essential Functions Perform on-site customer service of CPSD products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other CPSD departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades). Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures. Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. Further the goals and a positive image of CPSD by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. Qualifications Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawings.Advanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

$2500 Sign-On Bonus Shift - Tuesday to Friday, 10-hour shift, 2 PM to 12:30 AM, OT as neededWhat this job involves – The HVAC Mechanic will perform HVAC and mechanical preventive maintenance and repairs primarily on controlled temperature units. This will include hands-on work to complete the necessary work within Jones Lang LaSalle standards and guidelines.What is your day to day Performs troubleshooting, service, and maintenance on Controlled Temperature Units (CTU), HVAC systems including but not limited to controls, air handlers, BMS, BAS, actuators, pumps, valves, dampers, and motors.Operate and maintain the following systems: heating hot water & steam, ventilation equip., air conditioning, water conditioning – treatment and refrigeration skids for cool rooms.Operate & maintain ancillary systems such as cooling towers, pumps, chillers, etc.Install trouble-shoot maintain & repair air conditioning and refrigeration equipment related piping within the unit and controls. Experience in pneumatic and DDC controls, wiring methods, and instrumentation is requiredWork from CAD drawings, prints, schematics, sketches, or verbal instructionsAdapt and install specialized cooling and or heating devices for specific requirements.Experience with water treatment methods, and procedures for cooling and hot water circulation systems including testing of basic parameter, troubleshooting system problems, and repairing of equipment as needed.Performs installation and replacement of relevant HVAC system components.Performs work on a variety of non-HVAC building systems including FLS, doors, plumbing, and electrical as needed.Maintains good tenant relations through prompt and courteous response to tenant requests within the guidelines set forth by JLL.Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required.Contributes and own areas of refrigeration management.Perform work outside of the trade to include other duties as assigned by management including but not limited to painting, light bulb replacement, installation of pipe, plumbing and other maintenance related tasks.Required:Electronic and pneumatic controls and diagrams.1+ years of experience working as a refrigeration & air conditioning mechanic in an industrial or research environment.1+ years experienced in refrigeration and HVAC practices.Preferred:Experience working in a GMP environment2-3 years’ validated CMMS experienceEPA 608 UniversalKnowledge of BAS (Building Automation System) or QBAS (Qualified Building Automation System)Work Environment:Working inside of automated manufacturing distribution center#HVACjobs

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Critical Power Solutions Division (CPSD). Schedule technical sales or service support for customers including emergency service calls. Essential Functions Perform on-site customer service of CPSD products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other CPSD departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades). Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures. Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. Further the goals and a positive image of CPSD by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. Qualifications Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawings.Advanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Critical Power Solutions Division (CPSD). Schedule technical sales or service support for customers including emergency service calls. Essential Functions Perform on-site customer service of CPSD products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other CPSD departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades). Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures. Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. Further the goals and a positive image of CPSD by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. Qualifications Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawings.Advanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Critical Power Solutions Division (CPSD). Schedule technical sales or service support for customers including emergency service calls. Essential Functions Perform on-site customer service of CPSD products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other CPSD departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades). Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures. Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. Further the goals and a positive image of CPSD by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. Qualifications Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawings.Advanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Critical Power Solutions Division (CPSD). Schedule technical sales or service support for customers including emergency service calls. Essential Functions Perform on-site customer service of CPSD products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other CPSD departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades). Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures. Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. Further the goals and a positive image of CPSD by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. Qualifications Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawings.Advanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

POSITION SUMMARY Perform service support activities, troubleshoot and repair single and three-phase uninterruptible power supplies and peripherals to internal and external customers for the Service Center Division. Schedule technical sales or service support for customers including emergency service calls. ESSENTIAL FUNCTIONS Perform on-site customer service of power quality products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third-party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other MEPPI departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades).Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures.Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. EDUCATION/SPECIAL SKILLS/EXPERIENCE/TRAINING: Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawingsAdvanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Service Center Division. Schedule technical sales or service support for customers including emergency service calls. ESSENTIAL FUNCTIONS Perform on-site customer service of power quality products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other MEPPI departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades).Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures.Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. EDUCATION/SPECIAL SKILLS/EXPERIENCE/TRAINING: Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawingsAdvanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

POSITION SUMMARY Perform service support activities, troubleshoot and repair single and three-phase uninterruptible power supplies and peripherals to internal and external customers for the Service Center Division. Schedule technical sales or service support for customers including emergency service calls. ESSENTIAL FUNCTIONS Perform on-site customer service of power quality products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third-party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other MEPPI departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades).Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures.Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. EDUCATION/SPECIAL SKILLS/EXPERIENCE/TRAINING: Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawingsAdvanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Critical Power Solutions Division (CPSD). Schedule technical sales or service support for customers including emergency service calls. Essential Functions Perform on-site customer service of CPSD products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other CPSD departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades). Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures. Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. Further the goals and a positive image of CPSD by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. Qualifications Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawings.Advanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

POSITION SUMMARY Perform service support activities, troubleshoot and repair single and three-phase uninterruptible power supplies and peripherals to internal and external customers for the Service Center Division. Schedule technical sales or service support for customers including emergency service calls. ESSENTIAL FUNCTIONS Perform on-site customer service of power quality products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third-party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other MEPPI departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades).Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures.Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. EDUCATION/SPECIAL SKILLS/EXPERIENCE/TRAINING: Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawingsAdvanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

POSITION SUMMARY MEPPI's Service Center Division (SCD) is looking for a Field Service Technician I to perform maintenance and service support activities of single and three-phase uninterruptible power supplies and peripherals to internal and external customers. Perform battery installations and routine testing. *This position will require the successful candidate to travel more than 70% of the time. ESSENTIAL FUNCTIONS Perform on-site customer service of power quality products to include preventative and remedial maintenance, field modification, and testing.Provide customer contact for scheduling routine service and Preventative Maintenance work.Perform routine troubleshooting and repair work on power-quality products.Perform battery installations and testing.Perform maintenance procedure on periodical flow.Maintain service records and documentation of services provided.Inspect and test returned products and components and systems to determine defects and/or operational status.Submit accurate expense reports into the Company for reimbursement on a timely manner in accordance with Company policiesWork with other MEPPI departments including Engineering to determine product solutions for improved performance and protection.Further the goals and a positive image of the Division by conducting business with other MEPPI departments, customers, and suppliers in a timely and cooperative manner. QUALIFICATIONS Associates in Electrical Electronics or related technical field plus 0-1 years experience in troubleshooting and repair of a technical, electrical and/or electronic product or equivalent education and experience.Developed knowledge and proficiency of mechanical and electronic test equipment.Developed verbal and interpersonal skills to communicate with others, including customers, in a professional manner.Developed computer skills with emphasis on MS Office products and MRP/ERP business systems.

Position Summary Perform service support activities, troubleshoot and repair single and three phase uninterruptible power supplies and peripherals to internal and external customers for the Service Center Division. Schedule technical sales or service support for customers including emergency service calls. ESSENTIAL FUNCTIONS Perform on-site customer service of power quality products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other MEPPI departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades).Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures.Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. EDUCATION/SPECIAL SKILLS/EXPERIENCE/TRAINING: Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawingsAdvanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.

POSITION SUMMARY MEPPI's Service Center Division (SCD) is looking for a Field Service Technician II to perform maintenance and service support activities of single and three-phase uninterruptible power supplies and peripherals to internal and external customers. Perform battery installations and routine testing. ESSENTIAL FUNCTIONS Perform on-site customer service of power quality products including start-up service, preventative and remedial maintenancefield modification, and testing.Provide technical support to internal and external customers, including third-party service organizations and end users.Inspect, test, and document failed products, components, and systems, prior to their return to the factory to determine defects and/or operational status.Schedule and provide emergency technical support and field service on an on-call basis.Work with other MEPPI departments to determine product solutions for improved performance and protection.Attend daily project meetings as required.Identify, evaluate, and repair routine product failures. Identify and escalate non routine product failures to Supervisor.Recommend service product offerings to customers based on customer preferences and for the long-term maintenance of the capital investment (e.g., recommend battery upgrades).Troubleshoot malfunctions to a board level in an UPS system with minimal guidance.Maintain service records and documentation of services provided. Develop and deliver detailed documentation on the analysis of issues associated with the repair or inspection of UPS and/or energy storage equipment.Guide less experienced technicians on troubleshooting system failures.Submit accurate expense reports into the Company for reimbursement in a timely manner in accordance with Company policies. EDUCATION/SPECIAL SKILLS/EXPERIENCE/TRAINING: Associates in Electrical Electronics or related technical field with 4 years of experience in troubleshooting and repair of a technical, electrical and/or electronic product, or equivalent education and experience.Intermediate knowledge of UPS products, services, and peripherals including knowledge of common electrical equipment used in data centers.Advanced knowledge and proficiency of mechanical and electronic test equipment including operation, data collection and data reporting.Basic knowledge of communication and networking protocols.OSHA-10 construction and NFPA-70E certification.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and suppliers.Advanced analytical and problem-solving skills.Ability to read and understand detailed equipment schematics and facility one-line drawingsAdvanced computer skills with emphasis on Microsoft Office products and MRP/ERP business systems.