Business Unit Description: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: SUMMARY: (NIGHT SHIFT POSITION. 6a-6:30p 2-2-3 SCHEDULE)This position has the responsibility to comply with safety work rules at all times as well as an obligation to reinforce safety as a core value. Ensures that all policies, procedures and activities, related to food safety & quality, are followed and complied with uniformly, in an effort to reduce product and process variability.The mechanic position is responsible for ensuring the equipment productivity and efficiency through troubleshooting, preventive maintenance, and monitoring.#FirstinpeopleACITIVITIES: Assumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job’s duties/tasks. Adheres to safe work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately. Attends and actively participates in safety meetings/trainings.Ensures regulatory compliance at all times.Complete preventative maintenance requirements on all equipment.Monitor efficiency of all equipment and troubleshoot when necessary.Remove or replace defective parts by dismantling and reassembling equipment.Adjust all necessary components of equipment as needed.Repair and adjust all doors as needed.Must adhere to budget, USDA, OSHA, SQF, and FDA compliance guidelines.Perform other duties as assigned. Qualifications: EDUCATION: High school diploma or general education degree (GED) or equivalent.LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations.MATHEMATICAL SKILLS:Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume and distance.REASONING ABILITY:Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.LICENSES, CERTIFICATES, REGISTRATIONS:Examples of licenses, certificates, and registrations required:Power Industrial Truck Operator’s LicenseBlack Seal License is a plus.OTHER SKILLS AND ABILITIES:Specific skills and abilities required that are not included in other sections:Ability to function in a teamwork environment.Must be well-organized.Must be detail oriented.Ability to plan and prioritize activity.Ability to comply with all safety rules and regulations.Basic computer skills.Ability to work safely with chemicals

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Paid Time Off · Health Benefits Day One · 401K Match · No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary The Senior Maintenance Technician is a highly proficient experienced-level Technician capable of performing a wide variety of work to ensure that the facilities and equipment are maintained in a safe and effective working condition. Responsibilities Responsibilities include, but are not limited to, modification and repair activities in assigned maintenance operations areas which may include buildings, material handling, offices, lighting, electrical systems and plumbing in any of the distribution centers; and performs related work as required.Qualifications & Experience 5+ years of proven verifiable assignment-related maintenance experience, or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job as listed above.Minimum of 5 year maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenance.Experience with maintenance in a distribution center settingPossession of a valid driver’s license and a satisfactory driving record.Electrical experience with high and low voltage, AC and DC.Technical school or training desired.Computer skills navigating email/Microsoft Suite. Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business ResultsBenefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. Visit bbwbenefits.com for details. View Benefits Information The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer.We do not make employment decisions based on an individual’s race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all role(s) are filled.

Build an Aviation Career You're Proud OfWe're committed to the quality of work we do at every level. You'll achieve more with us through our training, high standards, and focus on preparation. Help us set the bar high across our entire organization so we can keep making an impact on the aviation world.Help us set the bar high across our entire organization so we can keep exceeding customer expectations. You'll play a vital role in ensuring the reliability of aviation repair and maintenance through training and preparation.What you'll do: Plans, develops, writes, revises, documents, tests, implements and controls programs for computer numerically controlled (CNC) machines and related fixturing.Prepares machine/process setup and operating instructions.Designs and/or manufactures jigs and fixtures from sketches, requirement descriptions or drawings.Provides support, training and problem resolution to operations personnel who use computer numerically controlled machines.Liaises with engineering regarding component repairs, inspection and induction of new repairs.Monitors performance, conducts feasibility studies and implements process improvements for computer numerically controlled machines.Prepares technical specifications and cost benefit analysis for procurement of capital equipment. Liaises with management in the procurement process.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.Position RequirementsThe person requires an ability to understand, utilize, and communicate specialized information in speech and written text. This specialized training is often formalized and recognized by a specific certificate, diploma, or license.Thorough understanding of repair design and development engineering manufacturing process, tool design, and fabrication methods and processes.Strong organizational, analytical, and oral and written communication skills.Thorough knowledge of computer aided design and manufacturing (CAD/CAM) systems. Master-CAM a plus.Ability to read, understand, and interpret blueprints.Familiarity with Fanuc and Haas controls and the ability to program at the machine, as needed.Prior experience as a machinist or toolmaker is preferred.High School Diploma or equivalentMinimum 3 to 5 years relevant experience.Experience with Microsoft Office is a plus.College diploma in manufacturing technology or a related discipline; or equivalent is a plus.Must be a US Citizen or a US Permanent Resident per ITAR regulations.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Req ID:436872Address: 25727 Duroc Street Circleville, OH, 43113Benefits: * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Hepaco, a Clean Harbors company, in Cincinnati, OH is seeking a Field Service Supervisor to plan, lead, organize and coordinate the daily operations of the service line crew. This includes responsibility over proper operation of equipment, driving operational efficiencies at the work site and ensuring accurate documentation related to the job is completed in a timely fashion. Hepaco, a Clean Harbors company, is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priority and we live it 3-6-5! Focus on maintaining sustainability and cleaning the Earth Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match Opportunities for growth and development for all the stages of your career Company paid training and tuition reimbursement Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerRead work order and ensures all required equipment is available and operational prior to starting jobsInspects equipment and general work area prior to starting any jobCorrect deficiencies that may cause accidents, injuries, lost productivity or harm to equipment or that are inconsistent with client's requirementsCommunicate Performs preventative and corrective maintenance on equipment when requiredCompletes all appropriate paperwork including service receipts, and submits to designated managementTrain Technicians I and II in equipment operation and service line processesOperate all necessary equipment in service line in accordance with operation training and safety proceduresPractice safety procedures in accordance with training and guidelines when workingProvide industrial services using appropriate techniques including handwork or manual work in accordance with established methods and applicable regulationsManually cleans, installs, fits, repairs valves, caps, hoses, pumps, gaskets and all other external and internal equipment on projectsUnderstanding of equipment maintenance and ability to perform maintenance utilizing supplied breathing air and applicable personal protective equipmentMaintain good housekeeping and cleanliness in the cleaning areasCheck equipment at the start of each shiftLead safety meeting and ensure HPC safety policies are followedMeet progress deadlines and efficiently utilizes resourcesInstruct, provide feedback and direct and assist crew in performance of job duties to complete work in accordance with client requirements and Company policies, practices and proceduresEnforce Company employee policies and may remove employee from job when requiredFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsEnvironmental field service operations, construction, manufacturing, or similar industry experienceAbility to travel overnight up to 2-4 nights per monthAbility to be on-call for emergency response situationsAbility to pull a trailer via pick-up truck preferredAbility to interface with clients and managementAbility to manage project related vendorsAbility to manage, reconcile, and review all job-related documentationAbility to work in confined spaces for periods of timeValid Driver’s licensePerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPreferred Qualifications:Experience in industrial emergency response, Hazmat clean-up, confined space entrySupervising/working in confined spacesHepaco, a Clean Harbors company, is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class.Hepaco, a Clean Harbors company, is a Military & Veteran friendly company.#HEP *HEP

Clean Harborsis seeking aTravelingRemediationField Inspector.TheField Inspectoroversees and documents daily site activities for remediation and emergency response projects. In addition, Field Inspector will be required to collect soil and groundwater samples, air monitoring data and completion of field activities. Field Inspector will work under the direct supervision of the Field Project Manager/Field Supervisor and will assist in the completion of a project. ***An exciting way to build a career with Clean Harbors using this role as a steppingstone to work through the chain of the Field Services team and ultimately into a Project Manager position while gaining the necessary skills and experience to do so. Travel 95-100% required:This position will travel 6 weeks on the road and 1-week home paid. Pay:$25 an HR, OT and per diem available **Per Diem available daily, travel costs covered by the company. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5;Competitive wages;Comprehensive health benefits coverage after 30 days of full-time employment;Group 401K with company matching component;Opportunities for growth and development for all the stages of your career;Generous paid time off, company paid training and tuition reimbursement;Positive and safe work environments.Key Responsibilities:Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Accurately and completely document site activities including cost tracking, worksheets, waste shipping logs, manifest management, health and safety, documentation of meetings and conference calls and other paperwork via laptop or mobile device;Work in field with hands on labor alongside crew and Project Manager/Field Service Supervisor;Travel to different project locations including Wastewater Treatment plants, soil remediation locations, and more;Reading and understanding of project documents and contracts;Will gain 40-hour Hazwoper, OSHA 10 and possibly more certifications through the company;Learn to calibrate air monitoring meters and associated Health & Safety equipment;Work on project financial tracking and assist in various project administrative functions, including generation of required reports, etc.;Ordering and receiving supplies for projects;Possibly operate some heavy equipment.What does it take to work for Clean Harbors High School Diploma or equivalent is required;Bachelor’s degree in Environmental Science or Engineering required;Be safety orientated and have a commitment to safety;Willing to do manual labor;Willing to work outside in all kinds of weather, utilizing prescribed Personal Protective Equipment;Should have working knowledge of Microsoft Office software and professional level written / oral communication skills. Civil Engineering / construction / survey experience a plus.40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today. To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.*CH#LI-SE1

Company DescriptionPay Rates Starting between: $12.10 - $17.53 / hour Are you passionate about team building, customer service, and meeting new people Pilot Company offers a dynamic environment where no two days are the same. Teammembershave the opportunity to build an inclusiveatmospherewith their co-workers and make a better day for every type of guest – whether it’s the professional driver stopping for a clean shower, the commuter grabbing their morning coffee, or the vacationerneeding their go-to snack along their journey. We embrace and celebrate our diverseguests and team members,whofuel creativity, innovation, and positivity. We strive to make every stop on your career journey and ourguests’ journey a great one!Also, there are a number of opportunities to work in other roles within our travel centers and restaurants so while we may be hiring for a specific role, we always look to train and offer experience for other roles we have.We hope your next career stop is with us! Join our team and start your journey with Pilot Flying J.BENEFITSWeekly Pay15 cent fuel discountFree daily meals$10 low-cost health plans (for full-time team members)Paid time offFamily leaveAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other characteristic protected under applicable federal, state, or local law.Military encouraged to apply.Job DescriptionMaintaining overall cleanliness of the storeCleaning showers and restroom facilitiesWashing, loading, and unloading towels for showersPerforming general repair/ maintenance of the storePicking up and taking all trash around travel centerProvide excellent guest service through well-maintained facilitiesQualificationsRequired QualificationsHighly motivated self-startersAbility to work as part of a teamAble to lift 50 pounds and walk/stand most of the dayAbility to work a flexible schedule of nights, days, weekends, and holidays Preferred QualificationsExperience in a similar positionKnowledge of industrial equipment and ability to fix small problemsAdditional InformationWellness ProgramReward and Recognition ProgramProfessional development401(k) retirement savings planPaid parental leaveAdoption AssistanceFlexible ScheduleFull and Part Time positions available

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

What You'll Do: Analyze, troubleshoot, repair, and resolve technical issues with equipment or componentsPerform component-level troubleshooting of electronic devices, resolving integration and configuration issues through circuit analysis, waveform calculations, fault isolation, PROM programming, and signal flow tracingInterpret and adhere to schematics and blueprints for repair workApply through-hole and surface soldering techniquesWhat We're Looking For: Technical with Electronics Field of Study preferred High School Diploma or Equivalent Ability to use a 10-key quickly and accuratelyAble to be immobile for long extended periodsAbility to transport 60 Lbs. Able to quickly learn new systems and technologyAble to use relevant computer system applications at a basic level Working Conditions: CLEAN environment requiring ESD protection (provided)Occasional non-standard work hours or overtime as business requiresWhat's In It For You Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.Diversity, Equity & Inclusion: It's not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.Don't meet every single requirement Apply anyway. At Shyft Global Services, a TD SYNNEX Company, we're proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you're excited about working for our company and believe you're a good fit for this role, we encourage you to apply. You may be exactly the person we're looking for!We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.

Business Unit Description: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: Assumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job’s duties/tasks. Adheres to safe work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately. Attends and actively participates in safety meetings/trainings.Ensures regulatory compliance at all times.Complete preventative maintenance requirements on all equipment.Monitor efficiency of all equipment and troubleshoot when necessary.Remove or replace defective parts by dismantling and reassembling equipment.Adjust all necessary components of equipment as needed.Repair and adjust all doors as needed.Must adhere to budget, USDA, OSHA, SQF, and FDA compliance guidelines.Perform other duties as assigned. Qualifications: EDUCATION: High school diploma or general education degree (GED) or equivalent.LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations.MATHEMATICAL SKILLS:Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume and distance.REASONING ABILITY:Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.OTHER SKILLS AND ABILITIES:Specific skills and abilities required that are not included in other sections:Ability to function in a teamwork environment.Must be well-organized.Must be detail oriented.Ability to plan and prioritize activity.Ability to comply with all safety rules and regulations.Basic computer skills.Ability to work safely with chemicals

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Title:MachinistBuild an Aviation Career You're Proud OfWe're committed to the quality of work we do at every level. You'll achieve more with us through our training, high standards, and focus on preparation. Help us set the bar high across our entire organization so we can keep making an impact on the aviation world.Help us set the bar high across our entire organization so we can keep exceeding customer expectations. You'll play a vital role in ensuring the reliability of aviation repair and maintenance through training and preparation.Determines and documents the modification status/configuration of products being processed for repair or overhaul to verify compliance to the applicable regulatory and customer requirements.Specific AccountabilitiesReads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed.Computes dimensions and tolerances and measures and lays out work pieces.Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers. Troubleshoots, debugs and modifies to achieve expected performance.Adjusts and sets up machine tools for use by machining tool operators.Participates in continuous improvement of cell processes.Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements.Participates in the cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out other duties as assigned.Technical RequirementsHigh degree of mechanical aptitude, accuracy and precision.Thorough knowledge of manufacturing, tool design, fabrication methods and processes, metallurgy and heat treating.Working knowledge of welding, hydraulics, electricity and pneumatics.Proficient in the use of precision measuring instruments and hand tools.Ability to read, understand and interpret blueprints.Strong mathematical aptitude.Working knowledge of related company instructions, company processes, rework process instructions, original equipment manufacturer manuals, and MSDS labels.Working knowledge of production management computer systems and other related internal control systems.Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day.Regularly required to stand for prolonged periods.Completion of a machinist apprenticeship program; or equivalent.Attainment of trade certification.Must be a US Citizen.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesTuition ReimbursementRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.Background InformationThe typical minimum level of education to perform this job competently is equivalent to high school graduation and completion of a diploma training program at a college or technical school. The person requires an ability to understand, utilize and communicate specialized information in speech and written text. This specialized training is often formalized and recognized by a specific certificate, diploma or license.Directly/indirectly related work experience representing continuous learning and required for someone to perform this job competently is one to three years.Ongoing work assignments typically have clearly defined goals. The incumbent's education, training, and previous experience ensure work assignments are successfully carried out because he/she understands what is expected, as well as the best approach to take. #Standard Aero

Hepaco, a Clean Harbors company, in Cincinnati, OH is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Hepaco, a Clean Harbors company, is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementKey Responsibilities:Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsRequired Qualifications:Reliable transportationAbility to perform physical functions per Key ResponsibilitiesThis position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs.Perform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.Preferred Qualifications:Valid Driver’s licensePrevious relevant labor experienceHepaco, a Clean Harbors company, is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class.Hepaco, a Clean Harbors company, is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Hepaco, a Clean Harbors company, is a Military & Veteran friendly company.#HEP *HEP

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: This position is responsible for the management, training, scheduling and development of maintenance personnel providing support to the Production/Processing areas at the West Jefferson, OH facility. This newly constructed facility will produce protein drinks. PM shift.Assumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks.Supervision of maintenance crew.Production support in the Production / Processing areas.Creates work orders and PMs.Responsible for installing new equipment.Troubleshoots problems with equipment.Provides a safe work environment for employees.Recognizes and takes steps to resolve operating problems in order to minimize their impact on the operations.Cooperates with all departments to assure a coordinated work relationship exists at all times.Keeps accurate and up-to-date records (I.E. timecards, downtime records, absentee records, etc.)Enforces company policies in a fair and consistent manner.Encourages suggestions from employees which will improve production, quality, safety and/or control costs of production.Keeps manager informed on operating and/or employee problems which may require their attention or knowledge.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained.Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Responsible for Food Safety and Food Quality of MFI products.#firstinpeople Qualifications: Associate’s degree (AA) or two-year technical certificate in Mechanics and Electronics or a related field Two years of mechanical and electrical maintenance and supervisory experience; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.PREFERRED EDUCATION, EXPERIENCE AND SKILLS: Knowledge and experience supporting Aseptic filling operations. Tetra Pak experience a plus.Knowledge of basic mechanics, welding, electrical, fabrication, preventative maintenance, plant operations and government safety regulations.Able to supervise department personnel in a fair and consistent manner.Be able to recognize problem situations and take appropriate steps to resolve.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information in one-on-one and in group situations. Ability to respond to questions from internal/external customers/vendors at all levels including management.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

ENSURING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.