Ohio Medical Physics Consulting Firm is seeking a Therapy Medical Physicist based in Youngstown, OH to join their growing team. A successful candidate will be an integral member of the team but be able to work independently at client sites providing the highest level of clinical service. The facility is equipped with Elekta linear accelerators, Pinnacle and Monaco is used for treatment planning. Facility boast an excellent staff and Radiation Oncologists.By applying for this position, you agree that any calls from Epic Staffing Group and its subsidiaries may be monitored or recorded for training and quality assurance purposes.Epic Staffing Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, housing, age, disability or genetics.We will consider all qualified applicants for employment, including those with criminal histories, in a manner consistent with the requirements of applicable federal, state, and local laws.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Engineering Pay Range: ($88,600.00- $146,200.00) Target Bonus: % Req ID:25976 SummaryLincoln Electric has a terrific opportunity for an experienced Mechanical Engineer to join our Cleveland manufacturing operation. Plant Engineering implements capital projects and provides engineering support for the Consumable and Machine divisions of the Cleveland operations. As part of this critical team, the Mechanical Engineer will be responsible for mechanical aspects of projects including facilities preparation, equipment designs and equipment installations. You will also provide support for production and work on improvements to the existing equipment and facilities to improve health and safety, productivity, quality, and cost.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoWork in a team, hands on, environment on capital and strategic projects for the Cleveland Operation production facilities.Responsible for the mechanical aspects of the projects including facilities preparation, equipment design and equipment installation.Work on engineering solutions to improve equipment reliability and safety, lower operational and maintenance costs, and improve ergonomics.Engineer solutions that comply with ISO 14001 and EHS initiatives to improve the environmental & employee health & safety.Interface with all engineering, manufacturing and maintenance departments along with R&D, QA, and Supply Management to ensure accuracy of project design target details.Provide technical support to Production and Maintenance departments.Work with and often manage outside engineering and construction personnel.Ensure all safety, health, environmental, and compliance aspects for the project meet the appropriate regulations.Additional responsibilities as assigned by managers within the Plant Engineering department.Performs engineering work in operations, production, construction or maintenance environmentsDesigns and scales up manufacturing processes, instruments and equipment and tests manufactured products to maintain quality.Plans, designs and estimates time and cost and oversees construction and maintenance of structures, facilities, systems and components.Analyzes and develops solutions to engineering problems related to manufacturing equipment and systems or the causes of component failures.Develops and applies engineering standards and procedures and provides advice on issues within the engineering field.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience RequirementsBachelor degree in Mechanical Engineering with minimum of 3+ years professional experience.Excellent organizational skills,written and oral communications skills.Must have good judgment, be self-motivated and be safety conscious.Strong desire to take ownership and drive results while effectively managinga variety of assignments and projects.Willing to perform hands on work as required and work effectively on the shop floor with employees and processes.Experiencehandling small to medium sized projects and day-to-day shop support.PreferredExperience with Solid Edge CAD modelling software is preferred.Knowledge of ISO 9001, ISO 14001, EPA and OSHA standards is preferred.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

The R&D Engineering Co-op position is for our Product Engineering Group focused in the Commercialization Engineering or Process Engineering. The co-op will be assigned a mentor and at least one “real world” project to complete during their assignment.At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life with rewards, benefits and the flexibility to enhance your health and well-being Career with opportunities to learn, develop new skills and grow your contribution Connection with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process.he R&D Engineering Co-op position is for our Product Engineering Group focused in the Commercialization Engineering or Process Engineering. We are looking for innovative thinkers that are proven problem solvers. The co-op will be assigned a mentor and at least one “real world” project to complete during their assignment. Initially the individual would be expected to become skilled at making and testing paint.They would be responsible for assisting in optimizing formulations and processes through Design of Experiments and statistical analysis of the data. Potential to work with Operations for site projects. They will also be expected to participate in monthly and quarterly meetings presenting their work as needed. This position is for a minimum of 8 months starting in January 2026 through August 2026.EDUCATION Currently pursuing a Bachelor’s degree in Chemical Engineering or ChemistryBe a rising or current sophomore, Junior or Senior in college or university at the start of the Co-Op programMust have a HS diploma or GED Preferred Currently enrolled as Junior or SeniorChemical Engineering majorMinimum 2.8 GPA KNOWLEDGE & EXPERIENCE Must have access to reliable transportation and housingMust be at least 18 years of ageMust be willing to work up to 40 hours per week for a total of 6 months with or without reasonable accommodation Preferred Skilled at using Microsoft Word, Excel, and PowerPointBasic understanding of information technology infrastructure and computer platformsWorking knowledge of Minitab and Business Objects Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s staff, employees, and business relationships.

Product Engineer If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Eastlake is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ WHAT WE OFFER Weekly Pay for Hourly EmployeesComprehensive Benefit PlansQuarterly Bonus Opportunity401k with Company MatchEmphasis on Employee EngagementPaid Holidays and Vacation TimeTuition ReimbursementOpportunities for Advancement JOB SUMMARY Work cooperatively in a team environment to develop and enhance robust manufacturing processes and tooling to support the company’s growth in the aerospace and industrial investment casting markets.Develop, maintain, and teach “best practice” investment casting procedures and practices to ensure CPP business objectives are satisfied.Identify problems, generate alternatives and implement solutions to problems that affect yield, rework and overall quality of the product using a standardized approach.Take a leadership role occasionally in resolving cross-functional problems on cross-functional teams. PRIMARY RESPONSIBILITIES Support the construction of dies (shrink factor analysis), gages and support tooling needed to produce and inspect ceramic cores, wax patterns and castings.Identify and improve process yields using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.) to uncover variables in the process.Interface with tooling vendors and CPP Purchasing to produce a quality tool/die at a competitive price.Control the dimensional quality of castings to meet or exceed customer expectations.Develop internal job instructions.Identify, evaluate and implement new process technologies that will improve manufacturing and product capabilities.Document work procedures and processes.Work closely with other departments to ensure organizational objectives are met.Publish reports on research and completed tests using data-based decisions.Routinely audit production lots for adherence to established techniques and to ensure the repeatability of the results.Maintain a positive work atmosphere by behaving and communicating in a professional manner.Improve labor utilization and reduce cost.Communicate with tooling suppliers, core suppliers, and customers to meet product needs QUALIFICATIONS Education: BS in Engineering or related technical fieldExperience: 3-5 years’ experience in mechanical or product engineering in the investment casting industry. Increasing levels of responsibility.Certifications/Licenses: NoneOther Required Knowledge, Skills & Abilities: Knowledge of DS/SX (Directionally Solidified / Single Crystal) & Equiaxed casting process, shell parameters and dimensional impact. Knowledge of statistics. Knowledge of Six Sigma and Lean Manufacturing principles. Strong working knowledge of GD&T. Ability to interpret customer specifications relative to establishing internal written NDT specifications. Excellent analytical skills. Excellent communication skills. Strong PC skills. Strong program management skills. Skills using NX/UG, Solidworks, GOM, Minitab and Microsoft Suite. Excellent organizational, interpersonal and documentation skills. Ability to interpret customer drawings and models. Good written communication skills. Professionalism. Innovative thinking. Team orientation. Assertive. Energetic. Self-starter. Risk taker. Sense of urgency. WORKING ENVIRONMENT Working Environment: Office Environment/Manufacturing Facility. Physical Demands: Sitting/Standing for extended periods of time, able to lift up to 20lbs, extended periods of time using a computer screen.Travel Requirements: 10%Required PPE: Check for required PPE in areas you may be working.Safety Glasses: Needed in all areas of the plant.Steel Toed Shoes: Needed in all areas of the plant. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a full time position

Engineering Co-Op If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Euclid is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ SEMESTERS AVAILABLE Fall 2025Spring 2026Summer 2026Fall 2026 JOB SUMMARY Engineering Co-ops will be assigned to New Product Development engineering or Production Engineering working cooperatively with manufacturing to develop robust processes and tooling to support the company’s growth in the industrial and aerospace investment casting markets. Individuals identified as dimensional will focus primarily on dimensional control, the dies, fixtures, gages, and other tooling associated with the manufacture of investment castings.Problem solving, and the concepts & tools of problem solving, are essential to the job. Engineers will be required to identify & define problems, perform root cause analysis, and implement solutions to problems that affect yield, rework, and overall quality of the product using a standardized approach (PDCA, Six-Sigma). Occasionally taking a leadership role in resolving cross-functional problems. The candidate must be able to travel locally periodically to other CPP facilities, customers and vendors to provide problem-solving and technical support. PRIMARY RESPONSIBILITIES Develop, maintain, and teach “best practice” investment casting procedures and practices.Responsible for the construction of all dies (shrink factor analysis), gages, and support tooling needed to produce and inspect cores, wax patterns, and castings.Interface with tooling vendors and CPP purchasing to produce a quality tool/die at a competitive price.Identify and address process yields using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.) to uncover variables in the process that are not maintained in a controlled fashion.Strong working knowledge of GD&T.Able to interpret customer drawings, specifications, models (CAD/NX), and layout reports.Good written and oral communication skills required to develop internal job instructions.Gage R&R, SPC, non-straightening processes and other cost reduction initiatives.Identify, evaluate and implement new process technologies that advance manufacturing and product capabilities.Communicate with tooling vendors to design concepts for wax pattern die rework, the build of gate dies and support fixtures.Document work procedures and processes.Work closely with other departments to ensure organization objectives are achieved.Improve Labor Utilization and Reduce Cost.Routinely audit production lots for adherence to established techniques and to ensure the repeatability of the results.Good verbal communications with all levels of management, manufacturing, and customer engineering groups. QUALIFICATIONS Working on a BS in Engineering. Junior or Senior Year Preferred. Tooling, design, and CAD (preferably NX) experience Preferred.Strong communication skills (written and verbal), PC skills and program management skills.Knowledge of Six Sigma and Lean Manufacturing Principles.Excellent organizational, interpersonal and documentation skills.Motivated individual with data driven problem solving techniques. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment.Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management positionThis is an internship position

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:26110 SummaryLincoln Electric has an outstanding opportunity for a Manufacturing Engineer, supporting our Machine Division production teams. The Manufacturing Engineer will promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoThe Manufacturing Engineer will handle substantial portions of project work and day-to-day shop support, leading projects both within the department and cross-functionally. Specific responsibilities include:Develop and execute continuous improvement activities to reduce cycle time, inventory, and waste while improving process performance, quality, cost, and standardizing the processesResolving safety, environmental and ergonomics issuesQuality improvementsProcess improvements and optimization including cost reductionsPerforming cost analysesContinuous improvement initiatives / Six Sigma projectsDaily production support and development of processes for and the launching of new productsCapacity studiesEducation & Experience Requirements• Bachelor of Science degree in Engineering • Minimum 5 years of engineering experience in related field • Knowledge of various manufacturing processes, tools and materials • Ability to research, analyze and justify financial purchases and make sound financial decisions • Understanding of six sigma tools and statistical process control • Excellent interpersonal skills, including positive communication skills, both written and verbal • Work effectively and cross-functionally on a regular basis • Proficient in MS Office, including Word, Excel, Power Point; CAD software; ability to learn SAP • Experience in project management and ownership • Ability to perform hands-on work as required • Continuous Improvement, Lean Manufacturing experience desiredLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Engineering Co-Op If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Eastlake is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ SEMESTERS AVAILABLE Fall 2025Spring 2026Summer 2026Fall 2026 JOB SUMMARY Engineering Co-ops will be assigned to New Product Development engineering or Production Engineering working cooperatively with manufacturing to develop robust processes and tooling to support the company’s growth in the industrial and aerospace investment casting markets. Individuals identified as dimensional will focus primarily on dimensional control, the dies, fixtures, gages, and other tooling associated with the manufacture of investment castings.Problem solving, and the concepts & tools of problem solving, are essential to the job. Engineers will be required to identify & define problems, perform root cause analysis, and implement solutions to problems that affect yield, rework, and overall quality of the product using a standardized approach (PDCA, Six-Sigma). Occasionally taking a leadership role in resolving cross-functional problems. The candidate must be able to travel locally periodically to other CPP facilities, customers and vendors to provide problem-solving and technical support. PRIMARY RESPONSIBILITIES Develop, maintain, and teach “best practice” investment casting procedures and practices.Responsible for the construction of all dies (shrink factor analysis), gages, and support tooling needed to produce and inspect cores, wax patterns, and castings.Interface with tooling vendors and CPP purchasing to produce a quality tool/die at a competitive price.Identify and address process yields using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.) to uncover variables in the process that are not maintained in a controlled fashion.Strong working knowledge of GD&T.Able to interpret customer drawings, specifications, models (CAD/NX), and layout reports.Good written and oral communication skills required to develop internal job instructions.Gage R&R, SPC, non-straightening processes and other cost reduction initiatives.Identify, evaluate and implement new process technologies that advance manufacturing and product capabilities.Communicate with tooling vendors to design concepts for wax pattern die rework, the build of gate dies and support fixtures.Document work procedures and processes.Work closely with other departments to ensure organization objectives are achieved.Improve Labor Utilization and Reduce Cost.Routinely audit production lots for adherence to established techniques and to ensure the repeatability of the results.Good verbal communications with all levels of management, manufacturing, and customer engineering groups. QUALIFICATIONS Working on a BS in Engineering. Junior or Senior Year Preferred. Tooling, design, and CAD (preferably NX) experience Preferred.Strong communication skills (written and verbal), PC skills and program management skills.Knowledge of Six Sigma and Lean Manufacturing Principles.Excellent organizational, interpersonal and documentation skills.Motivated individual with data driven problem solving techniques. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment.Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management positionThis is an internship position

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Manufacturing Req ID:26104 SummaryLincoln Electric has an outstanding opportunity for a Manufacturing Engineer, supporting the Machine Division's Production & New Product Development. The Manufacturing Engineer has ownership of torque tools and fastening strategy for Machine Division assembly. The Manufacturing Engineer will expand MES integration and capabilities in the Machine Division, while playing a key role in promoting and adopting a continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company.What You Will DoManage substantial portions of project work and day-to-day shop support with little to no supervision,lead projects both within the department and cross-functionally.Direct the work of techs, college students or other engineers, and may be required to direct/lead/teach other engineers and techs on their projects and more technically challenging work inside or outside the department. Assignments may be assigned by supervisors or developed on their own but will need to be communicated to supervision to assure alignment with company objectives.Develop and execute continuous improvement activities to reduce cycle time, inventory, and waste while improving process performance, quality, cost, and standardizing the processes.Typical assignments may include but are not limited to:Developing torque curves for assembly operationsIntegrating torque tools and assembly instructions into MESResolving safety, environmental and ergonomics issuesProcess improvements and optimizationCost analysis and reductions,Capacity studiesEvaluation and implementation of employee suggestionsDevelopment and implementation of new processesSix Sigma projects,Continuous Improvement initiativesShop support, quality improvementsDevelopment of processes for and the launching of new productsEducation & Experience RequirementsBachelor of Science degree in EngineeringMinimum 5 years of Engineering experience in related fieldExperience developing torque and fastening strategiesUnderstanding of and experience with MESKnowledge of various manufacturing processes, tools and materialsMust have good judgment, be well organized, and able to work with minimal supervisionCommitment to seeking opportunities for cost savings and process improvementsAbility to research, analyze and justify financial purchases and make sound financial decisionsUnderstanding of six sigma tools and statistical process controlExcellent interpersonal skills, including positive communication skills, both written and verbalWork effectively and cross-functionally on a regular basisProficient in MS Office, including Word, Excel, Power Point; CAD software; ability to learn SAPExperience in project management and ownershipAbility to perform hands-on work as requiredAbility to occasionally work off shiftsLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Customer Experience Req ID:25584 Job ResponsibilitiesJOB SUMMARY:The Service Engineer - EV Charger Product Line will provide technical support and expertise for our new EV charger product line, ensuring optimal performance and customer satisfaction. This role requires a candidate with a strong technical background and experience, preferably from the EV charger or capital equipment industries, and specific experience with power electronics.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES):Technical Support: Provide expert technical support for the EV charger product line, addressing and resolving customer issues efficientlyCollaboration: Work closely with the customer service team to troubleshoot and solve customer problems, ensuring seamless communication and service deliveryOn-Site Support: Travel to customer sites as needed to provide hands-on technical assistance for troubleshooting and repairsDocumentation: Maintain detailed records of all service activities, including customer interactions, technical issues, and resolutionsTraining: Assist in training customers and internal teams on the operation, troubleshooting, maintenance, and repair of the EV chargersContinuous Improvement: Identify opportunities for product and service improvements based on customer feedback and field experiencesStrategic Input: Provide strategic input and technical expertise in the development of service programs and processes for the EV Charger product lineCompliance: Ensure all service activities comply with company standards and industry regulationsJob RequirementsDESIRED EXPERIENCE:5+ years of technical experience, preferably in the EV charger or industrial machinery industriesProven track record of providing technical support and resolving complex technical issuesExperience with power electronics is essentialEDUCATION:A technical degree is required. Relevant work experience and demonstrated technical expertise are highly valueSKILLS AND COMPETENCIES:Strong technical knowledge and problem-solving skillsExcellent communication and interpersonal skillsAbility to work both independently and as part of a teamProficiency in using technical support tools and software.Willingness to travel to customer sites as neededCustomer-focused approach with a commitment to delivering high-quality serviceLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801- Cleveland, OH,United States (US) Employment Status: Salary Full-Time Function: Engineering Req ID:25284Purpose: To participate as an electrical engineer within the Commercial Power Sources Team as a design engineer to develop or improve new and existing products.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES):Work in R&D on the design, specification and documentation of electrical components, assemblies and complete arc welding / plasma cutting systems.Activities include design and testing of circuits, PCB layouts, and electromagnetic devices as required.Develop test specifications for production use. Analyze product field failure specimens and/or production test failure specimens for root cause identification and corrective action.Perform and supervise the testing of new designs, processes, warranty improvements and cost reductions.Coordinates the activities of technical support personnel.Engineer safe, high quality, cost effective, ergonomic, and environmentally responsible parts, subsystems and complete machines.Engage in Voice of Customer actions and evaluate market needs.Support sales, Marketing, Service and customer issues as required.Revitalize and rationalize legacy products and improve their quality.Creates value by supporting supply chain initiatives and creating designs with common parts.Collaborate with team colleagues, R&D, Manufacturing, Production, Supply, Quality and Service Departments to establish and achieve objectives.Interact with suppliers, customers, distributors, and sales engineers on an occasional basis.Engage with global teams and suppliers to reduce overall costs.Establish and support corporate strategic related projects; contributes to strategic planning.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Level II: Has working knowledge and experience in own discipline. Performs a range of mainly straightforward assignments.Level III: Has in-depth knowledge in own discipline and basic knowledge of related disciplines. May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives. Acts as a resource for colleagues with less experience.Level IV: Is recognized as an expert in own area within the organization. May lead functional teams or projects.BASIC REQUIREMENTS:Bachelors of Science in Electrical Engineering or related field required3 - 8+ years of experience in research and/or product developmentProficient with Microsoft Office programs. Excellent organizational skills.Possesses and applies a broad knowledge of principles, practices and procedures to the completion of a variety of difficult assignments and changing priorities.Experience in a manufacturing environment preferred but not requiredAbility to perform hands-on workSelected candidate’s Job Level and Pay Grade will be determined based upon qualifications and experience. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:25817 SummaryLincoln Electric is seeking an Enviromental, Health, and Safety (EHS) Engineer for our World Headquarters located in Euclid, OH. The EHS Engineer is a professional who is responsible for developing, implementing, and coordinating environmental and occupational health and safety programs for the Cleveland Operation facilities. This position requires an individual who can work effectively with many stakeholders at all levels throughout the organization to drive compliance, engagement and improvements in our workplace environment and safety.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits!What You Will DoWork on a team in a hands-on environment to execute projects, programs, and processes designed to continually improve the environmental footprint, reduce injuries and maintain regulatory compliance.Lead the Cleveland Operations as subject matter expert for Environmental, Safety and Compliance.Support the ISO 14001 and 45001 management systems through involvement in Audits, Objective & Targets, Job Hazard Analysis (JHA), etc.Conduct incident investigations identifying the root cause and response plan.Host and facilitate investigations and respond to inquiries from regulatory bodies including OSHA, BWC, EPA, etc...Work with project engineers to identify and solve EHS and compliance issues prior to equipment installation.Update and implement lock-out-tag-out (LOTO) procedure for equipment.Communication and education of new EHS and Agency requirements to the Cleveland Operations.Update and develop EHS specifications.Help manage and lead workplace safety including PPE selection, safety training, JHA’s, EHS walks, new hire orientation, contractor safety, etc.Keep up to date with regulatory agencies and policies ISO, EPA, NEC, NFPA, OSHA, etc.Education and Experience RequiredMinimum of a Bachelor’s degree required, preferred area for focus in Engineering or Environmental Health and Safety3 - 8 or more years’ required experienceStrong desire to take ownership and drive results.Knowledge of ISO 14001 & 45001, EPA, NEC and OSHA standards is a plus.Motivated to make a difference by improving Safety and the Environmental footprint.Excellent verbal and written communication skills and interpersonal skills.Demonstrate initiative and ability to accept responsibilities with minimal supervision.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Quality Assurance/Control Req ID:26107 SummaryLincoln Electric has an outstanding opportunity for a Quality Assurance Engineer who will implement projects and other quality related activities for our Euclid and Mentor Consumable Division Quality Assurance. Reporting directly to the Quality Assurance Manager, you will play a key role in identifying quality problems or potential quality problems, perform effective Problem Definition and Root Cause Analysis.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoInitiate corrective/preventive actions (CAPA) and verify the effectiveness of those actions. Drive CAPA’s to effective closure in a timely manner.Address customer warranty issues and effectively complete customer specific corrective action requests.Create and sustain standard printouts for TVM Boards. Provide additional support as the QA Representative.Provide support for new products, new equipment installs or process improvements:Provide permission note support to R&D and provide data as required for the development of new products.Work with Methods Engineering on process improvement initiatives.Drive or participate in effective FMEA’s, establish proper control plans and audit frequencies.Serve as the subject matter expert in analytical and testing equipment to maximize the effectiveness of existing equipment while investigating and pursuing advances in technology for continuous improvement.Reduce process variation using CI, Six Sigma, and other tools to improve the quality of products and reduce scrap.Manage the Quality Near Miss system. Evaluate the submitted Quality Near Misses and evaluate if additional action is needed for continuous improvement.Development and implementation of in-line monitoring systems/solutions for quality check-points.Utilize MES data to develop process control charts, process capability studies, etc. for new/existing processes. Develop new & update existing work instructions, specifications & procedures.Monitor the process audit program. Analyze outcome to determine if a CAPA or CI project is required.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience RequirementsBachelors of Science in Engineering required.Qualified candidates will have 1 - 5+ years’ experience minimum depending on level.Experience in manufacturing required with a solid technical background.Must demonstrate good judgment when evaluating quality related situations.Must work well with those in inspection, R&D, production, and supervision.Knowledge of Consumable Division products, processes, specifications and procedures is preferred.Willing to undergo the necessary training to obtain QA Engineer certification.Must be willing to travel to customer sites as necessary to solve quality related issues.Completion of Six Sigma training and a Red Belt or Black Belt project or willing to undergo the necessary training. Six Sigma preferredMust possess excellent communication skills particularly in technical areas.Proficient in Apriso and SAP.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 26250 Employment Status: Salary Full-Time Function: Engineering Req ID:25883 SummaryLincoln Electric is seeking an Additive Manufacturing Engineer for our Euclid, OH headquarters. The Additive Manufacturing Engineer will engage in product development, manufacturing, process and system enhancement, sales support, and various activities associated with the growing business of additive manufacturing. Lincoln Electric has the largest 3D metal printing capacity in North America, we can expedite production for large industrial parts for various industries and applications.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits!What You Will DoCollaborate on the design, specification, and documentation of materials integral to additive manufacturing processes.Dedicate efforts to elevate the quality and value of additive manufactured parts, employing engineering and scientific principles.Apply expertise in development projects, establishing and implementing standards and methodologies for product performance evaluations.Innovate and refine test methods to enhance new product development and standard product evaluations.Drive the enhancement of manufacturing process capabilities, facilitating the seamless introduction of cutting-edge products.Collaborate with production teams to troubleshoot and resolve robotic print issues.Partner with the sales team to offer support to customer inquiries, delivering effective solutions.Provide task-oriented guidance to Technicians, Technologists, and/or lower-level Engineers during the execution of development projects.Maintain comprehensive records of all work in process, documenting interim and final results in the prescribed format.Work collaboratively within a cross-functional team environment.Display exceptional organizational skills, adept at managing multiple tasks and assignments simultaneously.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Required Education and ExperienceMinimum Bachelor of Science in Engineering (Mechanical, Electrical, Welding, Metallurgy, Software, Material Science, or related Engineering field).Level I Engineer previous internship or co-op within engineering field.Level II Engineer 3+ years of hands-on engineering experience.Level III Engineer 5+ years of hands-on engineering experience. Selected candidate’s Job Level and Pay Grade will be determined based upon qualifications and experiencesComputer literate with proficiency in MS Office applications (Word, Excel, PowerPoint).Experience in modeling and drafting in CAD is preferred.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Manufacturing Req ID:26113 SummaryLincoln Electric has an outstanding opportunity for an Engineering Technologist, who will support production teams, solve technical issues and assist with new product development.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoThe Engineering Technologist provides technical support to engineers in areas such as production, operations, maintenance, safety, testing, process improvement or product development. In addition, this role will:• Develops and recommends procedures and methods and prepares technical reports and documentation. • Performs technical evaluations of events to determine root cause; recommends corrective actions. • Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. • Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. • Assists in the preparation of documentation. • Operate basic lab equipment including meters, oscilloscopes, temperature recorders, etc. (Training provided as needed). • Assumes additional responsibilities as needed or directed in support of the Company’s Strategy.Education & Experience RequirementsBachelor of Science degree, Engineering Technology preferred.Minimum 1 year of experience.Strong desire to take ownership and drive results. Able to analyze data and drive decision making.Works with a limited degree of supervision, with oversight focused only on complex new assignments.Proficient in the use of MS Office including but not limited to Word, Excel, PowerPoint.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:25931 SummaryLincoln Electric has an outstanding opportunity for an experienced Packaging Engineer. The Packaging Engineer plays a key role in supporting and driving packaging development in our Consumable Products Division. In this role, you will champion packaging innovation by actively identifying and developing concepts to show new packaging formats, materials, and technologies.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits!What You Will Do• Design and develop packaging solutions that meet product requirements, regulatory standards, and sustainability goals. • Identifies and implements changes to packaging designs to optimize quality performance and cost. • Verifies that packaging designs are optimized for manufacturing • Works closely with packaging suppliers, challenging them for creative, cost-effective alternatives as well as secondary trouble shooting and technical expertise & assistance for logistics teams. • Establishes supplier quality standards, creates incoming inspection plans, and supports supplier audits. • Provides training for appropriate personnel performing packaging activities. • Participates in the commissioning of new packaging equipment. • Develops standard practices and processes to ensure zero defects, productivity, and adherence to local and international legal & regulatory requirements. • Creates specifications and documentation related to package design, testing and validation. • Supports ISO 9001 & ISO 14001 methodologies. • Reviews, understands, and follows the departmental procedures that are associated with the performance of this job. • Creates project plans and organizes resources to ensure project milestones are met within expectations of timeline, quality, and budget. • Participates in product introduction teams to strategically deploy new packaging advancements. • Plans, organizes, and conducts packaging / production / shipping tests and validations according to ISTA, ANSI, and ISO testing. • Justifies and prepares capital expenditures for new packaging processes and equipment.Education & Experience Requirements• Bachelor's degree in Packaging Engineering or Mechanical Engineering • Minimum three years industry experience • Strong understanding of ISTA/ANSI/ISO test methods and their effects on packaging design is preferred • Understanding of manufacturing processes of various industries including corrugate, injection molding, films, etc. is preferred • Demonstrated continuous improvement and structured problem-solving methodologies utilizing Lean and Six Sigma tools • Ability to work effectively and cross-functionally on the shop floor on a regular basis • Competency with 3D modeling software • Ability to travel between Lincoln Subsidiaries and Suppliers • Knowledge of MS Office software, including MS Word, Excel, and Power Point; familiarity with SAP a plus • Ability to perform hands-on workLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Manufacturing Req ID:25876 SummaryLincoln Electric has an outstanding opportunity for a Tool Design Engineer. In this role, you will play a key role in assuring safe, high quality, cost effective, environmentally responsible manufacturing ofLincoln’s welding equipment products. This can be in any of the several groups of the Manufacturing Engineering department. Work will be highly detailed development and documentation of tooling primarily for production use. The Tool Design Engineer will handle a wide range of small, medium large projects with supervision and/or support of more experienced technical experts. If you enjoy projects that typically involve a mix of tool design and hands-on activities, this could be the right opportunity for you!In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits!What You Will DoSupport the tool room and manufacturing engineering through the development of accurate and detailed CAD models/drawings.Propose creative concepts and solutions to accomplish work order completion.Work with the tool room to process work orders effectively and resolve issues in a timely manner.Maintain tool design procedures and standards.Measure or coordinate measurement of tooling that is undocumented or altered to function properly.Support suppliers and subsidiaries needs associated with Lincoln tooling prints.Identify and resolve safety and ergonomic issues related to various types of tooling.Identify quality improvement opportunities and implement sustainable corrective actions.Implement process improvements and optimization using CI principles and tools.Identify opportunities to drive non-value added waste out of processes.Support the development of processes and the launching of new products.Production Team support.Cost analysis when developing tool designs or alternative concept and material proposals.Education & Experience RequirementsBachelor’s degree in an engineering field with3+ years experience.Applicable experience in a related field or completion of the Lincoln Electric Engineering Training program.Technically proficient in Solid Edge, Solid Works or an equivalent modeling software.Applicable experience with the use of measurement tools such as calipers and micrometers.Good written and verbal communication skills.Capable of handling a variety of assignments and changing priorities.Ability to work effectively on the shop floor with employees and processes.Willing and able to perform hands-on work as required.Ability to work independently or as part of a team.Good organizational skills.Good computer skills and proficient in Excel, Word, Power Point, etc.Must be self-motivated, safety and quality conscious.Willing and capable of working extra hours and off shifts when required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:25787 SummaryLincoln Electric is seeking an Industrial Engineer for our Euclid, Ohio manufacturing headquarters. The Industrial Engineer will facilitate the application of industrial engineering principles to our manufacturing flow, layout, visual management, and overall effectiveness of our safety, quality, and productivity goals.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits!What you will do: The Industrial Engineer will play a key role in supporting our manufacturing effectiveness, with specific responsibilities including:• Drive continuous improvement in a standard approach across all Consumable manufacturing departments • Assist with the implementation of a proactive continuous improvement program for existing manufacturing equipment • Design and implement manufacturing processes and systems to improve efficiency, reduce waste, and reduce cost • Develop and maintain process documentation, including standard operating procedures (SOPs) and work instructions • Develop new concepts in material processing, handling, material flow, floor layout, visual controls, and productivity for cost reduction purposes • Apply principles of industrial engineering to evaluate work method proposals and to develop recommendations to management affecting work methods and budget decisions • Promote integrating manufacturing processes with technology • Work with the support team and business stakeholders to translate process wants and needs into technical requirements for system improvements • Analyze production data to identify areas for improvement and implement solutions • Work with production teams to identify and resolve process issues • Collaborate with quality assurance to ensure that products meet specifications and standards • Develop and implement training programs for production teams on new processes and equipment • Work with maintenance to ensure that equipment is properly maintained and repairedExperience & Education Required• Bachelor's degree in industrial engineering or similar discipline • Minimum 3+ years industry experience • Demonstrated continuous improvement and structured problem-solving methodologies utilizing Lean and Six Sigma tools • Ability to work effectively and cross-functionally on the shop floor on a regular basis • Knowledge of MS Office software, including MS Word, Excel, and Power Point; familiarity with SAP a plus. • Ability to perform hands-on workLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:25700 SummaryLincoln Electric is seeking an Embedded Software Engineer for our Euclid, Ohio global manufacturing headquarters. The Embedded Software Engineer will design, implement, and maintain embedded software components for use in end products. Continually improve development techniques in order to create software more efficiently and reliably. The Embedded Software Engineer will apply engineering knowledge to provide creative software solutions for real world customer issues and use cases.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits!What you will do:• Develop multithreaded controls with industrial Real Time Operating Systems and Embedded Linux using C and C++ languages. • Develop software for communication with industrial automation networks (e.g. CAN, Ethernet/IP), Internet protocols (e.g. HTTP, FTP), and wireless (e.g. Wi-Fi and Bluetooth). • Develop software for IoT data collection (e.g. OPC) • Develop software for embedded graphical displays • Interact with key stakeholders including marketing, suppliers, customers, distributors, and sales engineers to drive new product innovation. • Maintain records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings/seminar. • Develop/refine test methods, as applicable, to support new product development, product evaluations, and competitive benchmarking. • Coordinate activities of internal and external technical support personnel as required.Education & Experience RequiredA bachelor's degree in an Engineering discipline is required.The selected candidate’s job level and pay grade will be determined based upon qualifications and experience.For a level II Engineer: four-year Engineering degree is required plus minimum of three (3) years Engineering experience.For a level III Engineer: four-year Engineering degree is required plus minimum of five (5) years Engineering experience.Excellent written and verbal communication skills.Ability to work independently and as part of a team.Excellent organizational skills.Initiative to take ownership of product designs.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Engineering Pay Range: $19.00/hour - $23.50/hour Target Bonus: % Req ID:25658The Lincoln Electric Engineering Co-op and Internship Programs provide meaningful experiences that will enhance your education. Co-ops and Interns will be based at one of our U.S. locations with a majority of the opportunities based in Cleveland, Ohio. Positions will vary based on engineering discipline and academic level achieved.Learning while earning:The Engineering Co-op and Internship Programs are designed to give candidates the opportunity to gain practical experience that will prepare you for a future at Lincoln Electric. The projects you will work on are real world scenarios where you can impact true business outputs. As a member of the program, you will be exposed to a wide variety of engineering and operations disciplines such as:Research & DevelopmentManufacturing EngineeringEnvironmental Health & SafetyConsumable EngineeringApplications EngineeringAdditive ManufacturingPower ElectronicsPath to Opportunity:Lincoln Electric is an engineering-driven company that relies on operational efficiency to stay competitive in the markets we serve. Your experience in the Engineering Co-op and Internship Programs set you on a path to be a major contributor to the future of this company. Graduating seniors will have the opportunity to interview for a full-time position for our Development Program.A Lincoln Electric Co-op or Internship is more than just work.Networking:Lincoln Electric is committed to keeping our Co-ops and Interns fully engaged in our company culture. Co-ops and Interns are each assigned an employee ‘Peer’ to help introduce them to the company and serve as a mentor throughout their term. Various networking events are held to interact and socialize outside of the office with not only Lincoln interns, but interns from other area companies, providing a unique perspective on building a career in Northeast Ohio. Previous events have included: National Intern Day, bowling, golfing, and luncheons with key leaders and executives.Community Engagement:As one of the largest employers in Cleveland, Lincoln Electric maintains a positive presence in the community through philanthropic efforts and corporate functions. Employees participate in community service projects through organizations such as the Greater Cleveland Food Bank, Greater Cleveland Habitat for Humanity, and Fleece and Thank You. Every summer, Lincoln Electric fields sports teams to compete against other companies in the Cleveland Corporate Challenge – and we like to win!Professional Development:As the Welding Experts, we couldn’t let our Co-ops and Interns leave without teaching them to strike an arc! All Co-ops and Interns participate in a week-long course in our world-renowned Welding Technology Center. Co-ops and Interns are invited to attend our Internship Learning Series Workshops on a weekly basis with individuals and leaders from departments throughout the company. These sessions are designed to introduce Co-ops and Interns to departments outside of their own, along with helping them develop critical skills.At the conclusion of the term, Co-ops and Interns take the spotlight to present on their project work in front of peers, supervisors, and company leadership.Minimum Qualifications:Pursuing an engineering degree in any of the following disciplines: Mechanical, Electrical, Computer, Chemical, Industrial, Material Science, Welding or Packaging. Other engineering degrees may be considered based on overall experience and business needs.Cumulative GPA of 3.0Ability to work in the United States on a full-time, permanent basisDesire to work in a manufacturing environmentLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:26235 SummaryLincoln Electric has an available opportunity for a Process Engineer. We are seeking a reliable and motivated individual to join our team at our Euclid, OH facility. TheProcess Engineerwill provide collaborative communication, applying knowledge and experience toward innovating and improving our Flux operation. This role involves working with cross functional teams using innovative and creative problem-solving skills to meet goals.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will Do• Work on engineering solutions to improve equipment reliability and safety, lower operation, and maintenance costs, and improve ergonomics. • Lead and/or assist with the implementation of continuous improvement program initiatives. • Develop new concepts in material processing, handling, and productivity for safety and cost reductions. • Support Production department in achieving safety, quality, attainment, and cost targets. • Create & maintain all documentation associated with the manufacturing process. • Willingness to learn business metrics such as STR attainment, Load, conversion costs, etc. and how they impact profitability. • Understand or willing to learn about Piecework pay and time studies. Incumbent should be willing to learn how to perform a time study. • Interface and provide technical support to all Engineering, Manufacturing, Maintenance, and R&D departments. • Experience or familiarity with Six Sigma and Lean manufacturing concepts is a plus. • Knowledge of solids handling, chemical processing, material sizing, extrusion, or wire drawing is a plus. • Assist with the design and scale up of manufacturing processes, instruments, and equipment. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Bachelors of Science Engineering and 3+ years professional experience. • Apply practical process knowledge with hands on approach to production troubleshooting, installations, and testing. • Investigate product warranty reports by collecting, analyzing, and summarizing information and trends. • Develop and recommend equipment specifications, performance requirements, cost analysis and proposals for integrating machinery, equipment, • and tooling into the manufacturing process. • Monitor and evaluate production parameters including but not limited to scrap generation, foundry sand, production fines and rework while ensuring product quality standards. • Author operational work instructions. • Work as a collaborative team member or team leader on strategic projects. • Work under general supervision with few direct instructions. Carry out routine tasks independently. • Interpret internal or external issues and recommend solutions/best practices. • Solve complex problems with assistance from senior engineers; takes a broad perspective to identify solutions. • Must be a self-starter with the ability to identify new opportunities. • Must be willing to periodically work off-shifts to support Production trials.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.