ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Process Engineer | PrimientAbout PrimientPrimient is a century old company with an entrepreneurial spirit. We are a leading producer of food and industrial ingredients made from plant-based, renewable sources. We deliver value through deep technical, commercial, and operational excellence that is backed by our long-standing corn wet milling heritage. Wherever we are in the process, from field to customer, our priorities are focused on ensuring we produce the safest, highest quality products through practices that uphold both our responsibility and commitments to the challenge and drive for excellence, our people and our planet. We are a privately held company with locations across the US, Mexico, Poland, and Brazil. We’re investing in our plants and people to unlock our potential in the industrial and food sectors. Guided by our values of Safety, Excellence, Integrity, and Growth, we’re focused on growing our business, our reputation, and the career of every teammate.About the RoleOur Process Engineerrole provides the opportunity to build out your experience and expertise. You’ll quickly gain exposure to wide-ranging challenges, technologies, and processes. You can make a value-adding difference to both process improvement and capital project execution.Your career development will be enhanced through working alongside expert colleagues in a highly collaborative team environment. You’ll also join our structured development program through our Engineering Ladder, a clear out-line of what steps are available. As your skills and experience grow, so will your responsibilities and impact.Staff Process Engineer > Process Engineer > Senior Engineer> Principal Engineer > (Senior Leadership)Key responsibilities: Process EngineerLead and manage key engineering projects – including capital project execution.Evaluate and optimize day-to day production results.Design, improve and implement new operational plant processes.Design, develop and implement continuous process improvements.Troubleshoot and develop corrective action plans towards continuous improvement.About YouWe’re looking for engineers who strive for excellence and are eager for more responsibility. BSc in Chemical Engineering or any related engineering field.Minimum of five years’ engineering experience in a manufacturing environment.Strong written and verbal communication skills.Working knowledge of basic chemical unit operations and Process Safety Management (PSM) systems.It is useful, but not essential, if you have experience in food or chemical processes or production.Total RewardsThe annual pay range estimated for this position is $94,480.80 - $141,721.20 and is bonus eligible.Please note that while this range reflects the full spectrum of compensation available for this role, individual compensation will be determined based on several factors including your experience, skills, and alignment with the role's responsibilities.During the interview process there will be an opportunity to discuss how your background fits into the pay range. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes:Competitive Pay Multiple Healthcare plan choices Dental and vision insurance A 401(k) plan with company and matching contributions Short- and Long-Term Disability Life, AD&D, and Voluntary Insurance plans Paid holidays & vacation Floating days off Parental leave for new parents Employee resource groups Learning & development programs Fun culture where you have an opportunity in shaping our futureCareer Path & CulturePrimient is committed to a workplace that is all in – ensuring everyone has the opportunity to develop and shape a career that matters in an open culture which embraces equity, diversity and belonging. We challenge old ways of thinking; and encourage employee voices to be a guiding force for ongoing learning. Primient supports a culture of inclusion that respects individual strengths, views, and experiences. We believe our differences make better decisions, drive excellence, and deliver better business results. Primient employees experience autonomy and accountability in their role. Here, employees control their destiny as there is opportunity for career growth and pathways outside the norm.Diversity, Equity, Inclusion & BelongingWe are believers in the power of difference. We strive to represent the communities in which we operate and to provide an inclusive, welcoming environment for all. We want Primient to be a place where every employee feels they belong and knows they are seen, heard, valued and safe to speak up. Our aspiration is to unlock the full potential in diverse perspectives, while offering everyone an equal chance to grow,Primient is an equal opportunity employer, committed to the strength of an inclusive workforce.California Consumer Privacy Act ("CCPA")The Company is committed to complying with the California Consumer Privacy Act (“CCPA”) and all data privacy and laws in the jurisdictions in which it recruits and hires employees. We collect the following categories of personal information for the purpose of hiring the best qualified applicants and to comply with applicable employment laws: Name and contact information; Job preference and work availability; Social Security Number and/or other identification information; Education and qualifications; Employment history and experience; Military service; Reference and background check information, including relevant criminal history and credit history; Social media information; Pre-employment test results; Post-offer medical examination information and results, including drug test results; Voluntary self-disclosure information regarding minority, veteran, and disability status; and Information provided by you during the hiring process.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Hourly Full-Time Function: EngineeringCompensation: $30 - $36 Req ID:25581 Job ResponsibilitiesPosition Summary:Complete Mechanical Engineering items needed to design, build, ship, and service our products. A Mechanical Designer II typically works on one project at a time (typically creating new designs that are very close to reference designs) and is working under the direction of a Mechanical Designer or Project Engineer.Reporting to this position:No direct reportsRole qualifications:Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives Focus on design and developmentPosition responsibilities:Understand and gain knowledge needed to work in software systems. i.e. SolidworksProvide mechanical layouts and details to productionTake initiative to meet challenging project timelines and budgets (hours and material)Ensure required ISO documentation is completedAssist in compiling electronic documentation for Service Manuals, updating design package to reflect status configuration of any critical itemAssure that product, as designed, is in conformance with quote and customer purchase orderWork well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functionsProvide small-scale mechanical layouts and detail prints to productionAssumes additional responsibilities and performs special projects in support of the Company’s 2025 StrategyMay support other roles as a cross-training opportunityCan work on one task without much direction from Senior Designer or Project EngineerJob RequirementsEssential skills and experience:Technical degree in Engineering desiredCAD (3D modeling) desired2 plus years of experience in manufacturing and design of industrial automated equipment desiredComputer proficiency including spreadsheet, word processing and project softwareCommitment to company valuesNonessential skills and experience:Safety (OSHA STDS)Environmental, Health & Safety (EH&S)Understand the Company’s EHS Policy and how it relates to this jobBe aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this jobWork in a safe and environmentally friendly manner and observe all company EHS proceduresKnow that the company EHS procedures are located on the ISO driveImmediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS proceduresAttend required EHS trainingPhysical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Work environment: The noise level in the work environment is usually moderate.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationAnna, OhioJob PurposeThe Electrical Controls Design role provides high quality, reasonably priced, on-time hardware, software, and safety design solutions to ensure stable new model and new technology introduction in all HDMA North American manufacturing facilities.Key AccountabilitiesWork in an engineering team atmosphere understand design requirements to create/modify automated production equipment.Provide electrical design to produce engineering hardware data to assemble/build, and wire a control system for production equipmentProvide electrical design to produce engineering software data to accomplish the control task for production equipment processes. (i.e. PLC, HMI, Motion Control, and Robotic programming).Provide on-site support to install, system up, and mature the control system for production equipment.Create and maintain a critical path schedule, determine resources, and manage resources to produce the control system design deliverables to achieve the overall project milestones for medium to large projects/ medium to high complexity.Provide direct mentorship to Associate Engineers in role on a 1:1 or 1:2 ratio where technical knowledge transfer occurs to foster growth in other individual contributorsProvide Project Leadership for equipment controls design for North America new model for an entire plant or new machine. Provide Plan versus actual reporting on QCDMS requirements and propose countermeasures to gaps encountered.Lead and attend design reviews to ensure design standards are achieved and design meets specification requirements for control system design deliverables for self and project team members. (peer reviews and mentee reviews)Qualifications, Experience, and Skills4-year Bachelor of Science degree in Electrical Engineering or 2-year Electrical related degree with 4 years’ experience.2-8 years in Electrical/Controls Engineering on automated production equipment. (depends on educational background)Knowledge of machine safety regulations. Knowledge of NEC/NFPA 79 standards. Servo position control experience. Robotic integration experience. Field I/O networking experience. Project management capabilities. Basic background in automated equipment electrical hardware/software design. Knowledge of PLC and HMI hardware and software functions.Workstyle75% Office environment - Design. 25% Manufacturing floor - Debug/Install.Must be willing to conduct physical confirmations in the manufacturing environment and conduct testing/debug on the manufacturing floor and/or at vendor sitesTravel up to 20% (North American Manufacturing Plants)Average work week is 45~48 hours (some weekends and 1 week shutdowns twice per year)What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie- Fort Loramie, OH,United States (US) Employment Status: Salary Full-Time Function: EngineeringCompensation: $75,000 - $105,000Req ID:25476Position Summary: Manage engineering processes required to design, build, ship, and service Lincoln Electric Automation equipment.Role qualifications:Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives.Focus on design and development.Position responsibilities:Assist in establishing Project timelines and determining manpower needs.Coordinate and Lead/Participate in Engineering Design (mechanical, electrical, pneumatic, and hydraulic).Lead teams in the Creation and troubleshooting of Control PLC, Safety PLC, HMI, and Servo Motion programs.Lead teams in the Creation and troubleshooting robot programs.Assist in complex system start-up, de-bug and final equipment maturation.Lead Project Team in the effort of adhering to both a challenging project timeline as well as a tight financial budget (hours and material).Assist purchasing in establishing costs and suppliers for purchased items.Assist onsite installation and startup activities including commissioning of equipment and resolution of final customer payment as required.Coordinate compiling of operator and maintenance manuals.Assist in developing/maintaining engineering and product standards.Responsible for Project ISO Documentation.Assist in team performance evaluations and lead mentoring process of new/inexperienced engineers.Essential skills and experience:Technical Degree in electrical engineering field desired.Electrical Schematic Creation and Design – AutoCAD Electrical experience preferred.Typically 10 years of proven design experience with Industrial Automation.PLC / HMI / Robot Programming / Network & Fieldbus / Safety Systems.Team Leadership and Project management experience. Must work well with Machine builders, management, and support functions.Commitment to company values.Educational, training, and experience requirements may be modified at the Managements Team’s discretion.Nonessential skills and experience:Computer proficiency, including spreadsheet, word processing and project management software.FMEA, Equipment Capability, Safety (OSHA STDS).Reporting to this position: No direct reportsEnvironmental, Health & Safety (EH&S)Understand the Company’s EHS Policy and how it relates to this job.Be aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this job.Work in a safe and environmentally friendly manner and observe all company EHS procedures.Know that the company EHS procedures are located on the ISO drive.Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures.Attend required EHS trainingPhysical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Work environment: The noise level in the work environment is usually moderate.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Coldwater Employment Status: Hourly Full-Time Function: Engineering Pay Range: $26.00 - $30.00 Target Bonus: 5.0% Req ID:25711 Job ResponsibilitiesBasic Functions: We are seeking skilled applicants for an Electrical Design Engineer position to help us maintain the momentum of our growth in this current dynamic marketplace.Role qualifications:Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives.Focus on meeting challenging project budgets and timelines.Principle Responsibilities:Responsible for electrical designs for process automation; this includes PLC hardware and software, motion control hardware and software, schematic diagrams, control system drawings, wiring techniques and basic electrical troubleshooting procedures.Responsible for start-up and refinement of complex industrial systems. Start-up and debug activities will occur at Coldwater Machine’s facility and at customer locations.Confer with colleagues, customers, vendors and others to review designs and discuss potential new engineering projects. Direct or coordinate manufacturing, construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, and customer requirementsPhysical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Job RequirementsMinimum Qualifications:Bachelor’s degree in Electrical EngineeringTwo - five years’ experience (including co-op experience).Complete PC capabilities, using MS office programs and others as required, and ability to develop computer programs or spreadsheets for specific analyses.2D Auto Cad Skills. Ability to design industrial machine control systems including safety systems.Ability to write and troubleshoot PLC codeRobotics experience is a plusISO 9001 experience helpful, but not requiredBehavioral Traits:Strong analytical problem solver with ability to process complex informationHighly self-motivated and drivenStrategic, dependable, and organizedActive listener with ability to give attention to multiple information being processedCommunicate both verbally and in writingInnovative and ability to think creatively to implement process improvementStrong time management skillsFocus on completing projects on time and within budgetForward thinking attitude and the continual need to refine and polish work, by seeking to exceed customer and Company’s expectationsWillingness to learn new skillsLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you. #LI-OnsiteWe are actively seeking an Orthodontist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact:Take care of your community while participating in activities to promote a positive image of the company!Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc.Love working with kids (they make up 70% or more of our patient base) Responsibilities: Orthodontists are responsible for providing Orthodontic services to patients with the support of their team. Our practice has:DentaPro softwareDigital x-ray and Panorex unitsFiber-optic handpiecesYearly OSHA and HIPPA and Emergency Management trainingRatio of 1 hygienist, 1 hygiene assistant, 2 dental assistants per providerPatient Base: primarily ages 3-21 and up to 30% adult population (depending upon location)Office flow: average 10-12 operative patients and 20-25 hygiene patientsState insurance plans, PPO and out-of-network payor mix Qualifications: We expect you to have: DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation Certificate of completion of a residency from an accredited post-graduate Orthodontic Program Current, valid license to practice dentistry in states where providing care or eligible for licensure Other certifications as required - CPR, etc. Nitrous Oxide certification (only LA, MS, DC, TX, MA) Compassion and a strong desire to provide dental care to both children and adults This opportunity provides: Growth and development through mentoring and collaboration Attractive sign-on bonuses and Relocation services for all FT positions Student loan repayment assistance What we offer: Guaranteed base pay in excess of 165K with uncapped bonus potential Sign on bonus No lab fees FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan with Company match Company paid malpractice insurance coverage Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan with Company match Company paid malpractice insurance coverage Paid holidays and time off Continuing Education reimbursements CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P) Reimbursements for associated licenses, certifications and professional dues such as ADA and/or AAPD memberships Multiple schedule options to help maintain a healthy work/life balance VISA and Green Card sponsorship available We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Overview: Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Associate Dentist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Take care of your community while participating in activities to promote a positive image of the company! Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Associate Dentists are responsible for providing dental services to patients with the support of their team. Our practice has: DentaPro software Digital x-ray and Panorex units Fiber-optic handpieces Yearly OSHA and HIPPA and Emergency Management training Ratio of 1 hygienist, 1 hygiene assistant, 2 dental assistants per provider Patient Base: primarily ages 3-21 and up to 30% adult population (depending upon location) Office flow: average 10-12 operative patients and 20-25 hygiene patients State insurance plans, PPO and out-of-network payor mix Qualifications: ***This opportunity provides growth and development through mentoring and collaboration*** What we offer: Guaranteed base pay in excess of 200k with uncapped earning potential Student loan repayment assistance Sign on bonus up to $50,000 (select locations) No lab fees FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan Company paid malpractice insurance coverage Paid holidays and time off Continuing Education reimbursements CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P) Reimbursements for associated licenses, certifications, and professional dues such as ADA and/or AAPD memberships Multiple schedule options to help maintain a healthy work/life balance VISA and Green Card sponsorship available We expect you to have: DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation Current, valid license to practice dentistry in states where providing care or eligible for licensure Other certifications as required - CPR, DEA, etc. Nitrous Oxide certification (only LA, MS, DC, TX, MA) Compassion and a strong desire to provide dental care to both children and adults We value teamwork, mutual respect, and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Compensation Range: $65,000-$75,000 Overview: Role: Registered DietitianPay Rate:Monday - Friday with Flexible schedulesJoin Healthcare Services Group (HCSG) as a Diet Technician, where you will assist in planning and delivering specialized meals to meet residents' dietary needs in long-term care facilities. At HCSG, we are passionate about positively impacting the communities we serve. If you share our commitment to excellence and enhancing resident experiences, join us and make a difference!Available Benefits For All EmployeesFree Telemedicine*Free Prescription Discount ProgramFree Employee Assistance ProgramsGet paid when you need it with PNC EarnedItFinancial Wellness Support from PNC Workplace BankingHands-on-Training & SupportCareer DevelopmentCEU Reimbursements – HCSG RDs working 30 hours or more per week are eligible for CEU reimbursement annually.Additional benefits may vary by location and eligibility. Additional benefits may include vacation, holiday, and sick pay, as well as medical, dental, vision, 401(k), Employee Stock Purchase Plan, and other voluntary insurance products.Ask your interviewer for details.*Not available in AR.ResponsibilitiesAssess the nutritional needs of residents and develop individualized meal plans.Ensure compliance with federal, state, and local regulations and guidelines.Monitor and document residents' nutritional status and progress.Provide nutrition education and counseling to residents, families, and staff.Collaborate with interdisciplinary teams to improve residents' overall health and well-being.Provide coverage in multiple buildings based on company needs.All other duties as assigned.QualificationsBachelor’s degree in Nutrition, Dietetics, or a related field.Registered by the Commission on Dietetic Registration.Hold a Certification/License in good standing within the state of practice.Knowledge of state survey process and compliance with nutrition care regulations (preferred, but not required).Strong organizational and communication skills.Maintain a positive attitude and effectively communicate with building occupants, administration, and HCSG leadership to perform daily tasks.Compliance with COVID-19 vaccination policiesIf multi-site registered dietitian, must have valid Driver's LicenseReady to Join Us If you're looking for a role where you can contribute to residents' health and well-being through excellent nutritional care and be part of a supportive and dedicated team, apply now and start making a difference at HCSG!HCSG is proud to be an equal opportunity employer committed to diversity and inclusion in the workplace. We encourage employees to bring their authentic, original, and best selves to work for a culturally inclusive team. We offer equal employment opportunities (EEO) to all employees and applicants regardless of race, color, religion, sex, national origin, age, disability, genetics, ethnicity, pregnancy status, gender identity, sexual orientation, marital status, political opinions or affiliations, veteran status, or other legally protected classes. HCSG also complies with applicable state and local laws and federal law requirements that govern nondiscrimination in every location where we operate.

Compensation Range: $65,000-$75,000 Overview: Role: Registered DietitianPay Rate:Monday - Friday with Flexible schedulesJoin Healthcare Services Group (HCSG) as a Diet Technician, where you will assist in planning and delivering specialized meals to meet residents' dietary needs in long-term care facilities. At HCSG, we are passionate about positively impacting the communities we serve. If you share our commitment to excellence and enhancing resident experiences, join us and make a difference!Available Benefits For All EmployeesFree Telemedicine*Free Prescription Discount ProgramFree Employee Assistance ProgramsGet paid when you need it with PNC EarnedItFinancial Wellness Support from PNC Workplace BankingHands-on-Training & SupportCareer DevelopmentCEU Reimbursements – HCSG RDs working 30 hours or more per week are eligible for CEU reimbursement annually.Additional benefits may vary by location and eligibility. Additional benefits may include vacation, holiday, and sick pay, as well as medical, dental, vision, 401(k), Employee Stock Purchase Plan, and other voluntary insurance products.Ask your interviewer for details.*Not available in AR.ResponsibilitiesAssess the nutritional needs of residents and develop individualized meal plans.Ensure compliance with federal, state, and local regulations and guidelines.Monitor and document residents' nutritional status and progress.Provide nutrition education and counseling to residents, families, and staff.Collaborate with interdisciplinary teams to improve residents' overall health and well-being.Provide coverage in multiple buildings based on company needs.All other duties as assigned.QualificationsBachelor’s degree in Nutrition, Dietetics, or a related field.Registered by the Commission on Dietetic Registration.Hold a Certification/License in good standing within the state of practice.Knowledge of state survey process and compliance with nutrition care regulations (preferred, but not required).Strong organizational and communication skills.Maintain a positive attitude and effectively communicate with building occupants, administration, and HCSG leadership to perform daily tasks.Compliance with COVID-19 vaccination policiesIf multi-site registered dietitian, must have valid Driver's LicenseReady to Join Us If you're looking for a role where you can contribute to residents' health and well-being through excellent nutritional care and be part of a supportive and dedicated team, apply now and start making a difference at HCSG!HCSG is proud to be an equal opportunity employer committed to diversity and inclusion in the workplace. We encourage employees to bring their authentic, original, and best selves to work for a culturally inclusive team. We offer equal employment opportunities (EEO) to all employees and applicants regardless of race, color, religion, sex, national origin, age, disability, genetics, ethnicity, pregnancy status, gender identity, sexual orientation, marital status, political opinions or affiliations, veteran status, or other legally protected classes. HCSG also complies with applicable state and local laws and federal law requirements that govern nondiscrimination in every location where we operate.