We are looking for Flaggers to join our team!
Unload and load supplies and equipment for company and vendor trucks, perform flagging out on roads and railroad crossings, keep shop and yard organized, assist with pickups and deliveries.
Job Duties: Lifts, carries, loads and unloads various construction items including line painting supplies, signs, tools, steel, aluminum, wood and hardware, etc. Prepares, cleans and sweeps work areas and maintain a neat, orderly, work environment. Make sure trucks are loaded with proper equipment for set tasks. Works out in the field performing flagging duties for traffic control. Organizing inventory and shelves Ensure yard is organized and kept clean. Assist with product inventory Ensure all safety rules and procedures are adhered to at all times. Perform other work related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer Don’t have a Highschool diploma, no problem! RoadSafe will pay for you to get your Highschool Diploma too! $125 Red Wing Boot Voucher! Nationwide Company = Nationwide Growth Potential for YOU! Opportunity to grow in a new industry! Ask about our unlimited bonus through our Employee Referral Program!
Requirements: Drivers License - Required - Let the Recruiter know if you have a CDL license and you may be eligble for a different role as well. Must be able to speak and read English. Ability to understand and follow directions as given Ability to lift and carry up to 50 pounds. Must be able to pass a background check, drug test. Ability to work flexible hours.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

RoadSafe is looking for a Flagger 2 to join our team!
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Pass a drug test Driver’s license required Pass Background Check Pass Motor Vehicle Records Check Reliable Transportation Must be able to speak and read English. Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training Pass a Department of Transportation Physical
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Put the wheels back in motion. Be a Wizard.As a Wheel Technician with Dent Wizard, you’ll use the latest tools and techniques to restore wheels and wheel covers – and we’ll reward you with uncapped earning potential. We’re hiring now in Columbus, OH.for a hard-working individual with the skills and outgoing personality to keep things rolling.Working on site at customer locations, you’ll fix cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels) using spray-painting equipment, power tools and work aids. The process involves removing the wheels, repairingthem in your mobile truck and placing them back on the vehicle.Tasks include painting surfaces, inspecting wheels, prepping and buffing defects, mixing colors and finishing.The Dent Wizard DifferenceUnlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision,401(k), paid vacation and moreOutstanding perks, including tools and supplies, company truck, gas card and moreEnvironmentally friendly trucks with explosion-proof filtration and fixtures, outfitted with premixed and pre-matched OEM wheel colorsIndependence to manage your day; no micromanagement Fun and dynamic team where everyone is supportive and has your backVariety of work on many types of cars, both new and old modelsThree weeks of trainingat one of our facilities with Master Wheel Techs to help you learn advanced techniques We pay for the training, pay you a salary while you train and provide travel and lodgingDevelop your technical and customer service skillsonce you are on the job, with assistance from experienced Techs Advancement potential into higher Tech levels (with more $) or management rolesWhat You Need to SucceedAuto painting experience or collision repair technical school training preferred but not requiredVision abilities including close, distance and color vision, depth perception and ability to adjust focusToughness and grit to work outside in all kinds of weatherStrong organizational and communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyPhysical stamina to kneel, bend, squat and climb, as well as lift up to 45 poundsValid driver’s license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location.This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between$50,000 and $65,000 annually.We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent WizardDent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:$20-$26+ flat rate with weekly pay! (negotiable based on experience)The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Schneider Electric has an opportunity for a HVAC Building Automation Technician in either West Chester, Columbus or Dayton, OH areas.Schneider Electriccreates connected technologies that reshape industries, transform cities and enrich lives. Our 135,000+employees thrive in more than 100 countries. From the simplest of switches to complex operational systems, our technology, software and services improve the way our customers manage and automate their operations. Help us deliver solutions that ensure Life Is On everywhere, for everyone and at every moment.http://www.youtube.com/watch v=YtExntUe89cGreat people make Schneider Electric a great company.What do you get to do in this position Services and maintains complex HVAC Building Automation SystemsDiagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Electrical troubleshooting knowledgeProvides sketches of field changes and discrepancies for engineering corrections and drawingsCommunicates with customer upon arrival and before leaving the work site.Meets regularly with customer to become familiar with operating problems.Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement.Acts as a technical resource to team and customer as needed.Provides start-up and checkout documentation to the installation team for use in commissioning and validationWorking knowledge of MS Office, File Structure, VISIO.Knowledge of basic BACNET/LON/MODBUS protocols. Must be highly organized and possess the ability to work in a high paced environment with the ability to prioritize tasks to meet the schedules given by the leadershipDemonstrate the ability to operate independently and autonomously and take ownership of all tasks. Excellent oral and written communication skills and team orientedQualifications:3+ years of field experience in the HVAC controls industry; preferably with troubleshooting, maintenance, and service Technical, hands-on experience with commissioning and programming of DDC controls. Knowledge of HVAC systems and equipment. The ability to communicate technical material to a nontechnical audience Proficiency with writing code for controller sequence of operations Proficiency with integration protocols (BACnet, Lon works, Modbus, etc.) .Requirements:Two-year (2) degree in a related technical field required or related work experienceExperience in HVAC building Automation a must!Proficiency with Microsoft Office products (Word, Excel, PowerPoint, Visio) and general windows environment Excellent customer service skillsExcellent verbal and written skillsCustomer-focused, results-oriented professional, and strong team player. Self-starter that demonstrates initiative. Ability to manage multiple priorities and stay organized.#L1-KJ1 Schneider Electric offers a robust benefits package to support our employees such as flexible work arrangements, paid family leave, 401(k)+ match, and more. Click here to find out more about working with us: http://se.com/us/careers. We seek out and reward people for putting the customer first, being disruptive to the status quo, embracing different perspectives, continuously learning, and acting like owners. We’re recognized around the world for welcoming people as they are. We create an inclusive culture where all forms of diversity are seen as a real value for the company. See what our people have to say about working for Schneider Electric. Why us Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive.25.7bn global revenue137 000+ employees in 100+ countries45% of revenue from IoT5% of revenue devoted for R&DYou must submit an online application to be considered for any position with us. This position will be posted until filledIt is the policy of Schneider Electricto provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.

$23.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) On-the-job training to expand your automotive abilities and help to obtain ASE Certificates Paid time off Medical, dental and other insurance Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses Retirement benefits (401k) Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving record At least 2 years of auto repair experience or coursework with automotive certifications 1 ASE certification (ability to acquire 2 additional ASE certifications within first year) Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel Comfortable working in a mechanical shop with moderate or loud noise levels Must have a complete set of tools required for auto repair and maintenance Basic computer skills including typing, data entry Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles Must be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. ColumbusOhioUnited States of America

Job Description Job Title:Automotive Technician / MechanicLocation: 8555 Sancus Blvd, Columbus, OH 43240Job Overview:This brand-new state-of-the-art facility is scheduled to open in September 2024. Interviews will begin in August 2024.We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our guest.Responsibilities include, but are not limited to:Technicians use their knowledge & skills to diagnose and fix vehicles for ourguestContinuously build experience as an automotive mechanic across a wide range of domestic and foreign vehiclesComplete full, accurate, and honest courtesy vehicle inspectionsWork as part of a team to troubleshoot guest concerns quickly and effectivelyFollow and promote our high standards of safety, cleanliness, and organizationWork closely with the service department and effectively communicate guest concernsWork together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications:Positive attitude and a desire to serve customers3+ years of experience as an automotive technician/mechanicASE Certifications preferred, or a plan to achieveCapable of diagnosing and repairing all makes/models of vehiclesMeet or exceed hourly goalsAptitude for learning additional skills and processesProfessional appearance and strong communicationA desire for long-term career developmentPhysical Requirements:Occasionally lift and/or move over 100 poundsBe able to work with tools on vehicles lifted above their headWork in tight spaces as dictated by the vehicle’s needed repairHave the needed dexterity in order to efficiently use hand toolsWalk/stand for the majority of their workdayDrive manual transmissions vehiclesEfficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center.All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Overview: With over 150 years of experience, and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. WHY JOIN US We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: Competitive pay Medical, Dental, Vision and Prescription coverage Paid vacation and holidays 401(K) match Life insurance, AD&D and long-term disability Tuition reimbursement Opportunities available nationwide Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more Pet Insurance Legal Plan, and ID Theft Protection Responsibilities: The HVAC Branch Manager leads the administrative team in supporting our HVAC and refrigeration technicians in the field. This manager routinely works directly with service and install technicians, dispatch personnel, and other managers to ensure customer satisfaction while meeting departmental goals and objectives. Presenting themselves as a senior company representative, the Branch Manager often communicates directly with customers, vendors, and suppliers to ensure accurate communication of job or project status and requirements. Interviews, screens, and evaluates administrative personnel to meet workload demands.Schedules, for HVAC technicians to meet service demands and customer expectations.Reviews technicians' work, techniques, and safety requirements to ensure quality meets established standards, and makes recommendations to improve quality and productivity.Compliance with all applicable health and safety regulations, policies, and established work practices. Ensures appropriate employee safety training and compliance is completed.Responsible for staff performance appraisals, and reviews and for setting improvement goals per company requirements.Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency, and training requirements.Communicates daily with dispatch reporting on project information, estimated time to complete jobs, labor hours, and parts or material used.Reviews work orders, invoices, and time reports for accuracy and maintains minimal accounts receivables.Develops and monitors budgets, goals, and objectives to ensure departmental profitability.Maintains communication with vendors and factory personnel concerning warranty issues, product recall notices, operational problems with products, premature failures, and other issues.Monitors assigned service vehicles to ensure they are being maintained, and operated according to company policy, and that an adequate inventory of parts and materials are maintained. Qualifications: 5+ years of successful and recent HVAC and Refrigeration service experience.2+ years of HVAC/R Service Management experience helpful.Two years of technical training or a bachelor's / master's degree is preferred.Solid working knowledge of Word, Excel, and Outlook and the ability to learn new systems.Valid driver's license.Problem-solving and conflict-management skills.Detail-oriented and highly organized with the ability to handle multiple tasks and assignments.Ability to generate ideas and create processes to grow the service department.Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to work well with management, executive leadership, support staff, and technicians.Ability and willingness to work a non-standard schedule: nights, weekends, and holidays, as necessary. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Shift - Tuesday to Friday, 10-hour shift, 2 PM to 12:30 AM, OT as neededWhat this job involves – The HVAC Mechanic will perform HVAC and mechanical preventive maintenance and repairs primarily on controlled temperature units. This will include hands-on work to complete the necessary work within Jones Lang LaSalle standards and guidelines.What is your day to day Performs troubleshooting, service, and maintenance on Controlled Temperature Units (CTU), HVAC systems including but not limited to controls, air handlers, BMS, BAS, actuators, pumps, valves, dampers, and motors.Operate and maintain the following systems: heating hot water & steam, ventilation equip., air conditioning, water conditioning – treatment and refrigeration skids for cool rooms.Operate & maintain ancillary systems such as cooling towers, pumps, chillers, etc.Install trouble-shoot maintain & repair air conditioning and refrigeration equipment related piping within the unit and controls. Experience in pneumatic and DDC controls, wiring methods, and instrumentation is requiredWork from CAD drawings, prints, schematics, sketches, or verbal instructionsAdapt and install specialized cooling and or heating devices for specific requirements.Experience with water treatment methods, and procedures for cooling and hot water circulation systems including testing of basic parameter, troubleshooting system problems, and repairing of equipment as needed.Performs installation and replacement of relevant HVAC system components.Performs work on a variety of non-HVAC building systems including FLS, doors, plumbing, and electrical as needed.Maintains good tenant relations through prompt and courteous response to tenant requests within the guidelines set forth by JLL.Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required.Contributes and own areas of refrigeration management.Perform work outside of the trade to include other duties as assigned by management including but not limited to painting, light bulb replacement, installation of pipe, plumbing and other maintenance related tasks.Required:Electronic and pneumatic controls and diagrams.1+ years of experience working as a refrigeration & air conditioning mechanic in an industrial or research environment.1+ years experienced in refrigeration and HVAC practices.Preferred:Experience working in a GMP environment2-3 years’ validated CMMS experienceEPA 608 UniversalKnowledge of BAS (Building Automation System) or QBAS (Qualified Building Automation System)Work Environment:Working inside of automated manufacturing distribution center#HVACjobs

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesUnion benefitsMatching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Must be able to work a 10:30pm-7am shift Education Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $26.75 / hour #CAZL ExperienceRequiredAble to work a 3rd shift ( 10:30pm- 7am )1 year(s): Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.1 year(s): Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

Paid Time Off · Health Benefits Day One · 401K Match · No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary The Senior Maintenance Technician is a highly proficient experienced-level Technician capable of performing a wide variety of work to ensure that the facilities and equipment are maintained in a safe and effective working condition. Responsibilities Responsibilities include, but are not limited to, modification and repair activities in assigned maintenance operations areas which may include buildings, material handling, offices, lighting, electrical systems and plumbing in any of the distribution centers; and performs related work as required.Qualifications & Experience 5+ years of proven verifiable assignment-related maintenance experience, or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job as listed above.Minimum of 5 year maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenance.Experience with maintenance in a distribution center settingPossession of a valid driver’s license and a satisfactory driving record.Electrical experience with high and low voltage, AC and DC.Technical school or training desired.Computer skills navigating email/Microsoft Suite. Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business ResultsBenefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. Visit bbwbenefits.com for details. View Benefits Information The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer.We do not make employment decisions based on an individual’s race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all role(s) are filled.

What we offer:Competitive Starting PayHealth Savings Account (HSA)Tuition ReimbursementPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceLife Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Fire Suppression systems and product lines as well as similar competitive manufacturers’ product lines.How you will do it:Work with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredFire alarm license and able to obtain and retain any licenses that are required by National, State and Local codes.3 years' experience for this role documented service experience in fire alarm or fire sprinkler.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.PreferredNICET certification Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Hepaco, a Clean Harbors company, in Columbus, OH is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Hepaco, a Clean Harbors company, is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priori ty and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsReliable transportationAbility to perform physical functions per Key ResponsibilitiesThis position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs.Perform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Valid Driver’s licensePrevious relevant labor experience Hepaco, a Clean Harbors company, is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class. Hepaco, a Clean Harbors company, is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Hepaco, a Clean Harbors company, is a Military & Veteran friendly company. #HEP *HEP

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeTo contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality.Key AccountabilitiesDevelop complex component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites with limited supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required.Establish or contribute to establishing cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing difficult part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas.Create and manage schedule of individual work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources with limited supervision. Consistently communicate project status and participate or lead project meetings, discussions, and development events.Generate high-level ideas and contribute to building strategies that support the evolution of new technologies. Support or lead maturation of ideas to prepare for development applications with limited supervision.Support market quality themes with limited supervision. Utilize problem-solving methods to analyse root causes. Develop and implement C/M specs as necessary limited supervision.Qualifications, Experience, and SkillsMinimum Educational Qualifications:Bachelors Engineering Degree in related fieldMinimum Experience:5+ years engineering experience preferably in Powersports or Automotive fieldOther Job-Specific Skills:Strong leadership, coaching and mentoring skillsAbility to interact/communicate effectively with staff/managementMust be able to operate with high level of confidentialityCompetent in FTA, FMEA, dimensional tolerance stack-ups and applicationCompetent analytical, problem solving, judgement, decision-making and prioritizationCompetent drawing and layout skills/techniques, include understanding of CAE principlesCompetent in creating a plan and scheduleCompetent in understand product development schedulesJob DimensionsNo. of Direct Reports: 0No. of Indirect Reports: 0Financial Dimensions: $0Decisions ExpectedPropose spec and drawingsPrioritization of individual workloadBalance of QCD for basic situations in individual area of responsibilityWorking ConditionsTravel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel.Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending.Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts.Overtime: Overtime expected based on project demands/responsibilities.Maintains professional conduct and follows all departmental, safety DEPARTMENT, and COMPANY policies, Procedures, AND rules.What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Legal Entity:Honda Dev. and Mfg. of Am.,LLCBusiness Unit:Frame & Interior Development BUDivision:Interior Cabin Development DivWork Location:Auto Development CenterHiring Manager:Allen CossetteShift:1stCareer Level:4Job Grade:Exempt-3Job PurposeAt the Sr. Engineer I Career Level, you are an expert in related technical areas and expected to oversee assigned development, testing, and / or research activities, while developing others from a technical, project, and / or team management role.Key AccountabilitiesProject/Team Management –Lead small to medium sized team, communicate the deliverables and plan to achieve them. Coordinate team activities on development/research/testing activities, managing the flow of team members on and off the project as needed. Build the capabilities of the team through coaching and mentoring. Provide technical guidance and oversight on requirement achievement, test results, and countermeasure application. Responsible for function output of project(s)Engineering Solution Design & Specification –Initiate and Lead the design of complex assemblies, the associated drawings, engineering specifications/standards and validation processes as required.Conceive and lead the development of engineering specifications and standards or functions to guide engineering and manufacturing work in the organization and its suppliers.Provide direct technical guidance and final oversight to multiple groups and ensure functional safety standards are met.Gather data and provide feedback and judgement on the feasibility, costs, quality and performance of design concept.Understand and consider in decision-making the connections and impact to different vehicle segments and development activities.Correlate with cross-divisional or cross-company counterparts when necessary and align with the organizational technology standards, regulations, and policies.Review and provide judgement on technical results and offer recommendations for development to technical staff, including up to Chief Engineer.Build or bring in new technologies and specifications, managing associated risks and addressing issues.Supplier Management – Identify new, select and lead technical negotiations with suppliers. Support PIC’s in supplier interactions and negotiations. Lead communications, set or support direction setting, build new and manage existing relationships; addressing issues as needed.Documentation – Compile and/or develop documentation to meet program deliverables and move development process forward. Review documents prepared by PIC’s for completeness and quality.Integration & Correlation – Integrate areas of responsibility into the vehicle or lead a group in doing so, providing guidance to resources as needed. Interacting and correlating direction at the cross-department and cross-divisional level. Adapting communication style and approach as needed depending on the audience and purpose.Relationship Management – Manage relationships with internal stakeholders andcounterparts, building professional credibility and trust. Manage inter-company issues andcoordinate internal resources. Provide reports on large project status items and deliverables.Personal Development – Be recognized as a subject matter expert in own area of technologyor department function and beyond in the division. Maintain an in-depth understanding ofcurrent and emerging technologies, regulations and company best practices.Improvement & Innovation – Lead continuous improvement projects and provide relatedtechnical or group management (i.e. in requirement development, process improvement, projectmanagement, associate development, communications). Lead and/or create new technologyinternally or with suppliers. Foresee and recognize potential cascading impacts in thedevelopment process and act to prevent or resolve them in a timely manner.Qualifications, Experience, and SkillsBachelors of Science in Mechanical, Aero, or Automotive Engineering, BS Industrial Design or Equivalent Industry Experience Minimum of six years of experienceSubstantial general work experience together with comprehensive job related experience in own area of expertise to fully competent levelExperience of supervising and directing people and other resources to achieve specific end results within limited timeframesWorkstylePrimary working location is seated at a deskLimited lifting of parts and part dunnage maybe required on occasionLess than 10% travelOT required as necessary to achiever program deliverablesTotal RewardsAt Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda. Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment. We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary: Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc.Annual BonusOvertimeIndustry leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionLifestyle BonusRelocation assistanceCareer Growth:Advancement opportunitiesCareer mobility Education reimbursement for continued learningTraining and Development programsAdditional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Custodian to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be performing housekeeping and cleaning activities of the facility in office spaces, kitchen areas, common areas, plant / production floor, restroom facilities, and parking lots / grounds areas. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses.What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Utilize equipment to perform housekeeping operations, including wet and dry mops, brooms, floor scrubbers, vacuum cleaners, cleaning supplies, towels, steel wool, carts, and trash cans. Ensure restrooms, kitchen, and breakroom areas are cleaned and stocked. Remove trash and place it in the designated area. Maintain window cleanliness. Uphold furniture by dusting and ensure builders hardware is satisfactory. Relocate light furniture to assigned areas as directed. Replace light bulbs in overhead fixtures when directed. Perform cleaning operations in the office areas, production floor, outside of the facility, and other property areas as assigned by the Maintenance Supervisor. Perform other duties as assigned by leadership QualificationsWhat we're looking for: Must be at least 16 years of age or older Must be 18 years of age or older to work in heights and electricity High school education and/or GED equivalent is preferred. Knowledge of cleaning materials and equipment to ensure safe usage of general cleaning chemicals. Ability to work independently with little or no supervision. Must be able to operate floor cleaning equipment and other tools as required. Ability to read, comprehend and interpret procedures and instructions in English. Ability to effectively present information and respond to questions from co-workers and managers. Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Columbus, OH!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Title: Maintenance Technician Location: 475 East High Street London OH 43140United States Pay Range: 25- 29 $/hr Duration: 6 months on W2 only - contract to hire FTE Shift Times: 7:30am-4pm • 4 days at main site and 1 day between the alternate 2 sites On Call : Emergency purposes if needed for all 3 locations Mobile duties necessary for this position-individual will need their own vehicle to be considered for this position*** Position Overview: • Individual will be responsible for building monitoring, building system operations and performance across 3 sites. • Receiving and closing CMMS system work orders • Mobile duties-individual will need their own vehicle to be considered for this position*** • 3 sites to monitor and maintain-a mix of production environment/office space/warehouse space • 33 miles distance max distance for all 3 sites • 4 days at main site and 1 day between the alternate 2 sites • Laptop and cell phone provided Attire: • Steel toe shoes • Individual will be responsible for wearing dress shirts or polos when at work/on site Responsibilities: • HVAC troubleshooting • Working under close supervision, assists in monitoring building system operations and performance. • Utilizes several trade skills such as carpentry, plumbing, electrical, painting, heating and cooling. • Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety. • Performs assigned day-to-day repairs, emergency and preventive maintenance. • Completes maintenance and repair records as required. • Reviews assigned work orders. • Estimates time and materials needed to complete repair. • Orders necessary materials and supplies to complete all tasks. • Assists with installation and modification of building equipment systems. • Assists with troubleshooting and repairs of buildings and installed systems to include: plumbing systems, kitchen equipment, drains, shop, and HVAC. • Inspects new installation for compliance with building codes and safety regulations. • Maintains lighting systems throughout the facility, cleaning fixtures and replacing bulbs and lamps. • Performs carpentry, furniture assembly and locksmith tasks as needed. • Responds quickly to emergency situations, summoning additional assistance as needed. • Provides vendor escorts as needed. • Performs other duties as assigned. • No formal supervisory responsibilities in this position. • Decisions made with general understanding of procedures and company policies to achieve set results and deadlines. • Errors in judgment may cause short-term impact to co-workers and supervisor. Must Haves: • High school diploma or general education degree (GED) and a minimum of two to three year of related experience and/or training*** • May require valid driver's license. Nice to Haves: • Safety training • Forklift Training Education and Experience • Ability to comprehend and interpret instructions, short correspondence, and memos and ask clarifying questions to ensure understanding. • Ability to write routine reports and correspondence. • Ability to respond to common inquiries or complaints from clients, co-workers, and/or supervisor. • Ability to calculate simple figures such as percentages. • Ability to understand and carry out general instructions in standard situations. • Ability to solve problems in standard situations. • Requires basic analytical skills. Uses personal computer and / or PDA for work order system, email, ESS and training. • Basic skills with Microsoft Office Outlook. • Physical requirements include stooping, standing, walking, climbing stairs / ladders and ability to lift / carry heavy loads of 50 lbs. or more. Performs general preventive maintenance and corrective repair of buildings, industrial systems, equipment and grounds. Notes: • Does this position have the potential to convert to direct Yes possible • What is the Lift Requirement Physical requirements include stooping, standing, walking, climbing stairs / ladders and ability to lift / carry heavy loads of less than 50 lbs. or more. •What does the interview process look like (Ex: Zoom/MS Teams, onsite, etc.) 2 rounds-virtual to onsite

Description We are currently seeking a skilled and reliable Maintenance Technician to support Oakleaf Village! Our mission is to offer the highest quality of life through compassionate care and a well-maintained living space. Join our team and be a part of a community that values dedication, respect, and excellence. Details: This is a full-time, hourly position. Pay is $17-18/hr.On-Call responsibility is required.A valid drivers license is required. Come be a part of the team where we are making a difference in residents’ lives - we will help you reach your potential while you help others reach theirs in a luxurious, comfortable, and safe space. Wallick Senior Living gives senior citizens a place called “home” – thanks to three decades of experience in developing, building, and managing independent living, assisted living and memory care communities across the state of Ohio. 37 years serving our communities. 9 communities and growing 500+ associates 92% associate engagement score Wallick Mission: Opening doors to homes, opportunity, and hope. Wallick Values: Our Values flow directly from our Mission and set the expectation for how all associates work together. These values are: Care Character Collaboration Working at Wallick Communities: Diversity, equity, inclusion, plus belonging. Four impactful words. One powerful and transformative journey. Here at Wallick, we know that when we invest in the equity of each group, all groups benefit. It’s not about one person, one idea, nor any one action. It’s about what we can accomplish together. Join us and work towards creating an inclusive and diverse workforce experience at Wallick. The work - How you will contribute: In accordance with the Wallick Mission and Values, the Facilities Maintenance Technician will perform general maintenance duties, taking care to ensure our residents needs are met and comfortable homes maintained to the highest standards. Essential Functions and Responsibilities: Using company provided technology, complete various work orders for site maintenance projects as directed by the Community leader. Complete unit turns within as directed by the Community leader. Responsible for the timely completion of work orders within the community, and detailed completion notes documented in the work order tracking system. Responsible for emergency maintenance response within the district which may include on-call rotations. Maintain specific levels of certification as required for the position. Responsible for maintaining the communities within the district to Company standards. Perform other related duties as assigned. About You: You have a minimum of 1 year of prior maintenance experience. You have a valid driver's license with reliable transportation. You pride yourself on providing a great experience for the resident, from respectful communication to quality and timeliness of repair. You are an adaptable and flexible problem solver. You have good written and verbal communication skills. You are detail oriented with the ability to balance and organize multiple priorities. Physical Demands: Position requires extensive walking, stooping/bending, balancing, kneeling, squatting, and climbing. Requires the ability to lift 50 lbs. Requires talking, seeing, and hearing with reasonable accommodation. Work Environment: Travel between communities within the district may be required, depending on need. Position requires work to be performed indoors and outside. Indoor working conditions are often inside a residence within the community, a communal area, or in the designated maintenance shop area. Outside work is throughout the community grounds and outdoor communal areas. Benefits: Pay on demand (access your money as you earn it) Up to 8 weeks of Paid Parental Leave Paid time off, Holiday pay, and Gift of Time Health, Dental and Vision insurance effective within 2 weeks Gym membership or Fitness equipment reimbursement Company paid life and long-term disability insurance. Voluntary life, short-term disability, accident, critical illness, and hospital indemnity coverage 401(k) with a 3.5% company match Tuition reimbursement Pet insurance Candidates must successfully pass a pre-employment drug screen and background check. #Maintenancejobs

MAINTENANCE TECHNICIAN**Sign-on bonus: $2K - $4K***Will relocate - 5K relocation bonusLOCATIONWest Jefferson, OHCOMPANY Michael Foods is a multi-billion-dollar supplier of foodservice, food ingredient and retail offerings that specializes in value-added eggs, refrigerated potatoes, and more recently, plant-based foods that help us meet the dietary and ideological needs of all consumers.JOB SUMMARYThis position has the responsibility to comply with safety work rules at all times as well as an obligation to reinforce safety as a core value. Ensures that all policies, procedures and activities, related to food safety & quality, are followed and complied with uniformly, in an effort to reduce product and process variability. The mechanic position is responsible for ensuring the equipment productivity and efficiency through troubleshooting, preventive maintenance, and monitoring.SALARY$23/hr and above - Commensurate with experience and levelRESPONSIBILITIESAssumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job’s duties/tasks.Adheres to safe work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately.Attends and actively participates in safety meetings/trainings.Ensures regulatory compliance at all times.Complete preventative maintenance requirements on all equipment.Monitor efficiency of all equipment and troubleshoot when necessary.Remove or replace defective parts by dismantling and reassembling equipment.Adjust all necessary components of equipment as needed.Repair and adjust all doors as needed.Must adhere to budget, USDA, OSHA, SQF, and FDA compliance guidelines.Perform other duties as assigned.QUALIFICATIONS2+ year experience with the maintenance, troubleshooting and repair of manufacturing equipmentExperience with automated equipment highly preferredPLC troubleshooting is highly desiredBoiler experience would be a plusBlack Seal License is a plusHigh school diploma or general education degree (GED) or equivalentCompany is an Equal Opportunity Employer and is committed to diversity in our workforce. EOE/M/F/D/V

Overview: Boyd's Tire & Service has been providing drivers in Central Ohio with the best automotive products and services since 1996. We strive to provide you with high-quality tires and reliable car repairs at our several locations in Columbus, Blacklick, Hilliard, Lewis Center, Marysville, and Central Ohio. Our staff is ready to go above and beyond to help you meet your needs, to get you back on the road, satisfied.The Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers and Boyd's Tire standards. COMPENSATION : VARIES UPON EXPERIENCE*Jr Auto Tech: $20 to $25/HR* Sr Auto Tech: $25 to $40/HR Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Automotive Technician Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement! Qualifications: Prefer a minimum of one unexpired ASE or equivalent experience or training. Possess valid driver's license or obtain a valid driver's license within 30 days of hire date. Ability to work a minimum of five days, including Saturdays. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

What You'll Do:As an Vehicle Service Specialist (aka auto technician), you will help keep our guests safe on the road by providing top-tier customer service while performing preventative maintenance services for their vehicles. Through our award-winning training program, you will learn to change oil, check and refill fluids, rotate tires, test and replace batteries, inspect and replace lights and wipers, perform an 18-point safety check, and more. You'll work as a team to provide fast, easy, trusted services to our guests, and have fun doing it!At VIOC, "It all starts with our people." Creating a diverse and welcoming workplace with team members from varied backgrounds and experiences is our highest priority. People of color, women, LGBTQIA+, veterans, and persons with disabilities are strongly encouraged to apply.The perks and benefits we'll provide you*:Competitive weekly pay - $15.75/HourPaid on-the-job training - No previous automotive experience is requiredNo late evenings or holidaysPaid time off (PTO), and holiday payTuition and certification assistance and access to a FREE online universityMedical and prescription drug coverage - with Health Savings Account contributionsDental, vision, and 401(k) savings plans - 100% match up to 5% We promote from within - a commitment we are passionate aboutBack-up Child and Elder CareCompany provided uniforms and tools50% discount on Valvoline Instant Oil Change automotive services What you'll need to succeed: Flexibility to work weekendsAn eagerness to learn, a friendly attitude, and a desire to be part of a customer-focused teamAbility to stand for up to 8 hours, climb stairs, and occasionally lift up to 50 poundsMobility to crouch, bend, twist, and work with your hands above your headComfortable working in a non-climate-controlled environmentEnglish fluency in reading, writing, and speakingHow you'll advance in your career:At Valvoline Instant Oil Change (VIOC), your roadmap to career advancement is limitless! Click here to learn more and to hear from some of our 'Vamily' members. With an award-winning training program, commitment to safety, and fair and honest values, we're here to help you reach every milestone.*Terms and conditions apply, and benefits may differ depending on locationValvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.

The pay range per hour is $28.20 - $31.68Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities - Maintenance Technician 1 (MT1)About job:Currently hiring for below shifts:A2 Key - Saturday, Sunday, Monday from 5:00pm to 5:00amup to $3.00 shift differentialTuition Reimbursement programBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

1. Performs regularly scheduled preventative maintenance on general electrical and plumbing systems, conveyor systems, electronic sorters, forklifts and various other powered material handling equipment. 2. Performs troubleshooting on equipment breakdown as instructed including disassembly, repair, parts replacement and parts fabrication to minimize equipment downtime. 3. Performs general carpentry, painting, electrical, welding, plumbing and HVAC installations as required. 4. Installs and repairs DC storage racks as required. 5. Maintains and completes various maintenance documents including but not limited to work order requests, preventative maintenance and daily job breakdown summaries, parts requests and parts purchase orders. 6. Performs semi-routine duties where some judgment is required. Work is performed under defined and uniform procedures. 7. Exhibits reasonable care and operation of powered material handling equipment. 8. Maintains the integrity of our Mission, Vision and Values statement while performing daily job duties.Qualification1. Strong English, reading and Math skills required. 2. Three to five years electrical, mechanical and maintenance related experience is required. 3. Strong mechanical, welding, carpentry, plumbing and AC/DC electrical circuitry knowledge through 440, 3-phase required. 4. Excellent hand and eye coordination required. Ability to climb and work at high elevations required. 5. Ability to interpret blueprints, schematics, utilize basic hand tools and electrical and/or electronic test equipment including volt/ohm meters and amp probes strongly preferred. 6. Ability to handle multiple tasks, be detail oriented, meet department standards and perform duties without immediate and constant supervision. 7. Previous Computer Maintenance Management System (CMMS) knowledge preferred. 8. Previous experience in the repair of powered material handling equipment strongly preferred. 9. Ability to perform physical activity at a sustained pace within the Distribution Center environment including walking, bending and lifting a minimum of 60 pounds is required.We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws.

Job Description Summary Performs maintenance and general repair services in specified markets of anywhere from 10-15 of our Kohl's stores, ensuring Company Brand Standards are maintained. Mileage is reimbursed for travel to and from the stores in the specified market. Performs all work in a quality manner following all safety rules and regulations. Responsible for meeting budgets and communicating effectively with both internal and external customers.ACCOUNTABILITIESGENERAL MAINTENANCEResponsible for timely and accurate completion of work orders as assigned by supervisorEnsures all necessary material and tools to perform daily work are available and kept in good condition (Kohl’s provides all needed tools)Performs Interior Store Repair and Maintenance as assigned by Territory Facilities Manager with a focus on Door (interior and exterior) and Plumbing (faucet, toilet, hot water heater, etc.) repairPerforms Interior Lighting and Electrical repairs including but not limited to lamp/ballast replacement, minor outlet repairs, once per year 90 minute emergency light testing and repairs, etc.Proficient in other Interior Repair and Maintenance items including but not limited to flooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, fixture, and stroller/ cart, and cleaning equipment repairsPerforms exterior maintenance of building including but not limited to low elevation (can be reached with a 12ft ladder), building painting, curb/ramp painting, power-washing, and minor Common Area Maintenance repairs of landscaping, signage, and concrete/asphaltIDENTIFY MAINTENANCE ISSUES Assists stores with Housekeeping problem solving with suggested solutions for Store Associate teams and Contract Cleaning providers to increase CLEAN presence in stores.Communicates safety and cleanliness issues and action plans to resolve with Store Management and Territory Facilities ManagerIdentifies Interior and Exterior maintenance issues that need resolution by exterior vendors and enters those issues into Web Based Facilities Management program for assignment and completionCommunicates recaps regularly to Territory Facilities Manager and/or Store and District Managers of stores visited, wins/opportunities found, as well as issues resolved on store visits. Communication may be verbal or email QUALIFICATIONSREQUIREDAbility to work independently without direct face to faceAbility to effectively communicate with multiple levels in Store organization verbally and writtenProficient in Microsoft Word, Excel, navigation of websites and able to utilize new computer systems, including smartphones1-4 years of prior maintenance work with a strong focus in Door, Plumbing, Electrical / Lighting, and general repair servicesPrior retail or office building maintenance experienceFamiliar with General Maintenance tools and tasksPREFERREDAbility to repair a variety of other interior/exterior issues as assigned by Supervisor including equipment and CAM itemsSPECIALModerate lifting – 25 to 50lbs on a regular basisDaily travel to local stores and occasional overnight travel to outlying stores. Mileage reimbursement provided.Ability to climb/work on ladders up to 12ft in height in order to address lighting, painting, etc. issuesValid driver’s license with a currently registered vehicle

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Put the wheels back in motion. Be a Wizard.As a Wheel Technician with Dent Wizard, you’ll use the latest tools and techniques to restore wheels and wheel covers – and we’ll reward you with uncapped earning potential. We’re hiring now in Columbus, OH.for a hard-working individual with the skills and outgoing personality to keep things rolling.Working on site at customer locations, you’ll fix cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels) using spray-painting equipment, power tools and work aids. The process involves removing the wheels, repairingthem in your mobile truck and placing them back on the vehicle.Tasks include painting surfaces, inspecting wheels, prepping and buffing defects, mixing colors and finishing.The Dent Wizard DifferenceUnlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision,401(k), paid vacation and moreOutstanding perks, including tools and supplies, company truck, gas card and moreEnvironmentally friendly trucks with explosion-proof filtration and fixtures, outfitted with premixed and pre-matched OEM wheel colorsIndependence to manage your day; no micromanagement Fun and dynamic team where everyone is supportive and has your backVariety of work on many types of cars, both new and old modelsThree weeks of trainingat one of our facilities with Master Wheel Techs to help you learn advanced techniques We pay for the training, pay you a salary while you train and provide travel and lodgingDevelop your technical and customer service skillsonce you are on the job, with assistance from experienced Techs Advancement potential into higher Tech levels (with more $) or management rolesWhat You Need to SucceedAuto painting experience or collision repair technical school training preferred but not requiredVision abilities including close, distance and color vision, depth perception and ability to adjust focusToughness and grit to work outside in all kinds of weatherStrong organizational and communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyPhysical stamina to kneel, bend, squat and climb, as well as lift up to 45 poundsValid driver’s license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location.This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between$50,000 and $65,000 annually.We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent WizardDent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offerCompetitive pay.Paid vacation, holidays, and sick time.Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis skilled position involves installing, programming, troubleshooting, configuring, commissioning, and servicing Fire Alarm Systems at customer sites including panel repair/reprogramming, device replacement/repair, resolving low voltage circuit troubles, and system testing. Organize and effectively utilize technical resources, information, material, and support to ensure efficient execution of all assigned tasks.How you will do itPerform installation/programming on fire alarm systems.Respond to customer service calls in a timely and efficient manner, troubleshoot, and repair as needed.Will be required to participate in the after-hours service program.Communicates with central dispatch on current work order status and receives updates on outstanding customer issues.Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational/product manuals.Supervise and inspect the installation of equipment to meet customer and contract specifications.Completes necessary certification courses on internal and external products used.Complete and submit all required task-related, activity, productivity, and other documentation on time.What we look forRequired3+ years of documented experience in low voltage electrical systems, including Fire/Life Safety Systems, Access Control, CCTV, and Security Systems.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Experience with hand tools test equipment, multi-meter usage, digital analyzer, and commissioning devices.High School Diploma or equivalent required.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Demonstrates a prominent level of customer service.Ability to lead & work well with team members.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, a positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Able to obtain and retain any licenses that are required by National, State, and Local codes.Must always comply with safety guidelines.Working knowledge of electronic and digital test equipment.Basic understanding of Network concepts and architectures.Extended knowledge of DOS and Windows.Ability to multi-task and prioritize in a short period.This role requires a minimum of a State of Ohio Fire Protection LicenseNICET Level II REQUIREDPreferredTwo-year Associate's Degree in Electronics; Network; Computer Science or a related field.NICET level IIi or ability to obtain in the first year.JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.#LI-OnsiteJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Legal Entity: Honda Dev. and Mfg. of Am.,LLCBusiness Unit: Power Unit/Chassis Dev BUDivision:Power Unit Development DivisionWork Location: Auto Development CenterHiring Manager:Nathan ThuerkShift:1stCareer Level:4Job Grade:Exempt-2Job PurposeTo develop and guarantee the correct powertrain hardware package required to meet all developmental, marketability, and regulatory targets. To actively manage test and development schedules and data input from multiple departments and divisions across HDMA.Key AccountabilitiesStrategy: Gather the latest global hardware specs from 4MOC / ADC and compile a comprehensive plan for application to future, responsible development models.Advise: Work directly with all powertrain related function groups to guarantee harmonious hardware maturation schedules and lead critical meetings to resolve conflicts between competing groups / departmentsProblem Solving: Support investigation of hardware / calibration issues that come up during development and develop corrective hardware plans as necessaryCommunication: Clearly and concisely report the status of hardware / calibration maturation to both function management side as well as team sideAuthorize: Lead regular test data review meetings and MaruQ preparation events to validate the hardware and calibrations that are being applied to a development.Qualifications, Experience, and SkillsMinimum Educational Requirements:BS or MS in Mechanical, Electrical, or Chemical EngineeringMinimum Experience:8 years related experience or equivalent level of education and experienceOther Job-Specific Skills:Proficient PC skills, including but not limited to excel, PowerPoint, and MatlabJob DimensionsNo. of Direct Reports: 0No. of Indirect Reports: >10 full time associatesFinancial Dimensions: >$250KDecisions ExpectedSetting the hardware application and verification plans for engineVerifying the hardware and calibration meets all marketability and regulatory requirementsResolving hardware based concerns that arise from developmentWorking ConditionsAssociate will work on the actual engine / vehicle with hand and power tools. Candidate can expect to spend a portion of their time working in the lab – confirming their systems on bench, on the car, or in thermal chambers. (20%)Associate will perform analysis and documentation, then communicate findings to varying levels of management. (80%)Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposePlease Note: This position is an Entry Level (0-3 years experience) position.Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered.In this role you will be responsible for the design and maturation of HVAC components as you work with a group of supportive and experienced engineers in a fast paced, continuous learning environment. As an associate within the Interior Development Division, you will be responsible for exceeding customer’s expectations by contributing to their “fun to drive” experience, as your designs will contribute to the customer’s comfort each time they drive. Key AccountabilitiesResponsible for, and able to clearly convey, part design details (customer usability, assembly, material, texture, maintenance, tooling technical requirements, etc.)Setting vehicle targets and achievement methodsCollaboration, communication and negotiation with other design groups, manufacturing, Styling, and suppliers to ensure the vehicle image can be met while meeting all regulations and part technical requirementsCreation of detailed layouts (2D), basic part data (3D) and drawingsManage part cost and investment throughout development to ensure program targets are being metProblem Solving to address part concernsHands on activity –communicating design ideas using VR or mock-upsSchedule and milestone management, including part testing and validation activitiesQualifications, Experience, and SkillsBachelor’s degree in Mechanical, Aeronautical, or Automotive Engineering, or Industrial Design.0-2 years of relevant experience.Past experience with CAD software (Catia V5 or V6 preferred).MS Office proficiency (Outlook, Teams, PowerPoint, Excel, etc.).Organization and communication skills.Ability to travel and work overtime as needed.Working ConditionsPrimary working location is seated at a desk.Limited lifting of parts and part dunnage maybe required on occasionOT required as necessary to achieve program deliverables.This role requires that the candidate be able to drive and requires possession of a valid driver's license.What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Columbus, OH!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Our client, an electric utility companyis seeking a Trans Right of Way Agent to join their team. The ideal candidate will have strong communication, conflict management and organizational skills which will align successfully in the organization.CAD Designer Pay Rate:$23-27/hr.Location: New Albany, OHDuration: 12-month contract, potential to convertHybrid Work ScheduleJob Responsibilities: Prepare maps using computer aided drafting via sketches, schematics, and other engineering related drawings.Create, revise, and maintain detailed engineering and record drawings, maps, and sketches using AutoCAD.Perform mathematical calculations required to accomplish assigned work.Operate reproduction machines, plotters, and other duplicating equipment.Promote and support the Company’s’ Accidnet Prevention and Safety and Health programs.Read vendors’ prints, shop and other drawings, and equipment operating instruction, and incorporate that information in the work being performed. Prepare and review plan and profile drawings.Prepare right of way and condemnation drawings. Job Requirements Associates degree in applied science, drafting and computer aided design or in civil, electrical, or mechanical engineering technology.HS diploma w/ 4 years of relevant experience in electrical utility and/or related industrial drafting and/or computer aided drafting.Proficiency in MicroStation and/or AutoCAD is required. What’s in it for me Benefits (Medical, Dental, Vision, 401k)Weekly pay with direct depositConsultant CareJob security - long-term assignments - some of our contractors have been on assignment for 5+ years!Opportunity to work for a company that has been around since 1906 If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson WellsManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Description Wallick Communities is searching for a Sr. Maintenance Technician to join the team supporting the Sawyer Manor and Trevitt Heights apartments in Columbus, Ohio. The pay range for this position is $25 - $28 per hour. Wallick Communities gives low-income families, single parents, and senior citizens a place called “home” – thanks to five decades of experience in developing, building, managing and overseeing affordable multi-family housing and assisted-living communities across the mid-west. 55 years serving our communities24,000+ residents call our community’s home 9 states and growing 1000+ associates 92% associate engagement score Wallick Mission: Opening doors to homes, opportunity, and hope. Wallick Values: Our Values flow directly from our Mission and set the expectation for how all associates work together. These values are: Care Character Collaboration Working at Wallick Communities: Diversity, equity, inclusion, plus belonging. Four impactful words. One powerful and transformative journey. Here at Wallick, we know that when we invest in the equity of each group, all groups benefit. It’s not about one person, one idea, nor any one action. It’s about what we can accomplish together. Join us and work towards creating an inclusive and diverse workforce experience at Wallick. The work - How you will contribute: In accordance with the Wallick Mission and Values, The Sr. Maintenance Technician will complete specific maintenance functions in a timely manner as directed by the Maintenance Manager or Community Manager, taking care to ensure our residents needs are met and comfortable homes maintained to the highest standards. Essential Functions and Responsibilities: Execute various site maintenance projects and unit turns as directed by leadership. Responsible for the timely completion of work orders within the community. Responsible for emergency maintenance response within the community which include on-call rotation.Maintain specific levels of certification as required for the position. Responsible for maintaining the communities to Company standards. Training and mentoring other less experienced maintenance staff.Assist with capital needs bidding.Assist with Reac readiness. Perform other related duties as assigned. About You: You have 3 or more years of experience in maintenance or a related field, preferably in residential housing. You have strong knowledge of HVAC systems, electrical systems, and plumbing systems. Certifications are a plus. You have basic knowledge of applicable law governing residential housing strongly preferred. You can use complex tools and equipment, such as welding equipment and heavy machinery. You are proficient with basic computer skills and smart phone. You have knowledge of Reac requirements. You have excellent problem-solving skills and attention to detail. You have strong communication and customer service skills. You have the experience and ability to lead and train other staff members. You have a Valid driver's license and reliable transportation. Physical Demands: Position requires extensive walking, stooping/bending, balancing, kneeling, squatting, and climbing. Requires the ability to lift 50 lbs. Requires talking, seeing, and hearing with reasonable accommodation. Work Environment: Travel between communities within the district may be required, depending on need. Position requires work to be performed indoors and outside. Indoor working conditions are often inside a residence within the community, a communal area, or in the designated maintenance shop area. Outside work is throughout the community grounds and outdoor communal areas. Benefits: Employee Stock Ownership Plan Paid Parental LeaveGenerous time away from work packageHealth, Dental and Vision insurance effective the first day of the next pay period following the date of hire, typically within 2 weeksGym membership or Fitness equipment reimbursementCompany paid life and long-term disability insuranceVoluntary life, short-term disability, accident, critical illness, and hospital indemnity coverage401(k) with a company match after 90 daysTuition reimbursementPet insurance Candidates must successfully pass a pre-employment drug screen and background check.

What You'll Do:As an Vehicle Service Specialist (aka auto technician), you will help keep our guests safe on the road by providing top-tier customer service while performing preventative maintenance services for their vehicles. Through our award-winning training program, you will learn to change oil, check and refill fluids, rotate tires, test and replace batteries, inspect and replace lights and wipers, perform an 18-point safety check, and more. You'll work as a team to provide fast, easy, trusted services to our guests, and have fun doing it!At VIOC, "It all starts with our people." Creating a diverse and welcoming workplace with team members from varied backgrounds and experiences is our highest priority. People of color, women, LGBTQIA+, veterans, and persons with disabilities are strongly encouraged to apply.The perks and benefits we'll provide you*:Competitive weekly pay - $15.75/HourPaid on-the-job training - No previous automotive experience is requiredNo late evenings or holidaysPaid time off (PTO), and holiday payTuition and certification assistance and access to a FREE online universityMedical and prescription drug coverage - with Health Savings Account contributionsDental, vision, and 401(k) savings plans - 100% match up to 5% We promote from within - a commitment we are passionate aboutBack-up Child and Elder CareCompany provided uniforms and tools50% discount on Valvoline Instant Oil Change automotive services What you'll need to succeed: Flexibility to work weekendsAn eagerness to learn, a friendly attitude, and a desire to be part of a customer-focused teamAbility to stand for up to 8 hours, climb stairs, and occasionally lift up to 50 poundsMobility to crouch, bend, twist, and work with your hands above your headComfortable working in a non-climate-controlled environmentEnglish fluency in reading, writing, and speakingHow you'll advance in your career:At Valvoline Instant Oil Change (VIOC), your roadmap to career advancement is limitless! Click here to learn more and to hear from some of our 'Vamily' members. With an award-winning training program, commitment to safety, and fair and honest values, we're here to help you reach every milestone.*Terms and conditions apply, and benefits may differ depending on locationValvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offerCompetitive pay.Paid vacation, holidays, and sick time.Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis skilled position involves installing, programming, troubleshooting, configuring, commissioning, and servicing Fire Alarm Systems at customer sites including panel repair/reprogramming, device replacement/repair, resolving low voltage circuit troubles, and system testing. Organize and effectively utilize technical resources, information, material, and support to ensure efficient execution of all assigned tasks.How you will do itPerform installation/programming on fire alarm systems.Responds to customer service calls in a timely and efficient manner, troubleshooting and repairs as needed.Will be required to participate in the after-hours service program.Communicates with central dispatch on current work order status and receives updates on outstanding customer issues.Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational/product manuals.Supervise and inspect the installation of equipment to meet customer and contract specifications.Completes necessary certification courses on internal and external products used.Complete and submit all required task-related, activity, productivity, and other documentation on time.What we look forRequired3+ years of documented experience in low voltage electrical systems, including Fire/Life Safety Systems, Access Control, CCTV, and Security Systems.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Experience with hand tools test equipment, multi-meter usage, digital analyzer, and commissioning devices.High School Diploma or equivalent required.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Demonstrates a prominent level of customer service.Ability to lead & work well with team members.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, a positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Able to obtain and retain any licenses that are required by National, State, and Local codes.Must always comply with safety guidelines.Working knowledge of electronic and digital test equipment.Basic understanding of Network concepts and architectures.Ability to multi-task and prioritize in a short time.This role requires a minimum of a State of Ohio Fire Protection License.PreferredTwo-year Associate's Degree in Electronics; Network; Computer Science or a related field.NICET level II or ability to obtain in the first year.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeIn this role you will be responsible for the performance and maturation of the vehicle HVAC system and components as you work with a group of supportive and experienced engineers in a fast paced, continuous learning environment. As an associate within the Interior Development Division, you will be responsible for exceeding customer’s expectations by contributing to their “fun to drive” experience, as your contributions will impact the customer’s comfort each time they drive.Key AccountabilitiesPlan and oversee the development testing, validation, and evaluation of HVAC systems and components, on both a bench and vehicle level. Serve as main point of contact for troubleshooting activities that involve multiple stakeholders and root cause analyses to be resolved.Collaboration, communication and negotiation with other Departments, Manufacturing, Styling, and suppliers to ensure the vehicle targets can be met while meeting all regulations and technical requirements. Summarize test results, review, and propose judgements on technical targets for review by the Technical Expert.Setting vehicle targets and achievement methods.Creation of detailed test schedules and activities. Accountable to create test result reports and conduct verification reviews with technical leadership.Benchmarking competitor performance and new technology researchProblem Solving to address technical concernsHands on activity – communicating ideas using bench tests or mock-upsProject schedule and milestone management, coordinate team actions on project tasks, request additional team member support when needed, and identify potential areas for improvement.Qualifications, Experience, and SkillsBachelor’s Degree in Engineer, preferably in Mechanical, Aeronautical, or Automotive Engineering, or Industrial Design0-2 years of relevant experienceRelevant engineering project experience on a university (Capstone or Sr. Design Project) or professional levelPast experience with data acquisition softwareMS Office proficiency (Outlook, Teams, PowerPoint, Excel, etc.)Organization and communication skillsAbility to travel and work overtime as neededWorking ConditionsPrimary working location is seated at a deskLimited lifting of parts and part dunnage maybe required on occasionOT required as necessary to achieve program deliverables.This role requires that the candidate be able to drive and requires possession of a valid driver's license.What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.