We are looking for Flaggers to join our team!
Unload and load supplies and equipment for company and vendor trucks, perform flagging out on roads and railroad crossings, keep shop and yard organized, assist with pickups and deliveries.
Job Duties: Lifts, carries, loads and unloads various construction items including line painting supplies, signs, tools, steel, aluminum, wood and hardware, etc. Prepares, cleans and sweeps work areas and maintain a neat, orderly, work environment. Make sure trucks are loaded with proper equipment for set tasks. Works out in the field performing flagging duties for traffic control. Organizing inventory and shelves Ensure yard is organized and kept clean. Assist with product inventory Ensure all safety rules and procedures are adhered to at all times. Perform other work related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer Don’t have a Highschool diploma, no problem! RoadSafe will pay for you to get your Highschool Diploma too! $125 Red Wing Boot Voucher! Nationwide Company = Nationwide Growth Potential for YOU! Opportunity to grow in a new industry! Ask about our unlimited bonus through our Employee Referral Program!
Requirements: Drivers License - Required - Let the Recruiter know if you have a CDL license and you may be eligble for a different role as well. Must be able to speak and read English. Ability to understand and follow directions as given Ability to lift and carry up to 50 pounds. Must be able to pass a background check, drug test. Ability to work flexible hours.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

RoadSafe is looking for a Flagger 2 to join our team!
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Pass a drug test Driver’s license required Pass Background Check Pass Motor Vehicle Records Check Reliable Transportation Must be able to speak and read English. Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training Pass a Department of Transportation Physical
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Put the wheels back in motion. Be a Wizard.As a Wheel Technician with Dent Wizard, you’ll use the latest tools and techniques to restore wheels and wheel covers – and we’ll reward you with uncapped earning potential. We’re hiring now in Columbus, OH.for a hard-working individual with the skills and outgoing personality to keep things rolling.Working on site at customer locations, you’ll fix cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels) using spray-painting equipment, power tools and work aids. The process involves removing the wheels, repairingthem in your mobile truck and placing them back on the vehicle.Tasks include painting surfaces, inspecting wheels, prepping and buffing defects, mixing colors and finishing.The Dent Wizard DifferenceUnlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision,401(k), paid vacation and moreOutstanding perks, including tools and supplies, company truck, gas card and moreEnvironmentally friendly trucks with explosion-proof filtration and fixtures, outfitted with premixed and pre-matched OEM wheel colorsIndependence to manage your day; no micromanagement Fun and dynamic team where everyone is supportive and has your backVariety of work on many types of cars, both new and old modelsThree weeks of trainingat one of our facilities with Master Wheel Techs to help you learn advanced techniques We pay for the training, pay you a salary while you train and provide travel and lodgingDevelop your technical and customer service skillsonce you are on the job, with assistance from experienced Techs Advancement potential into higher Tech levels (with more $) or management rolesWhat You Need to SucceedAuto painting experience or collision repair technical school training preferred but not requiredVision abilities including close, distance and color vision, depth perception and ability to adjust focusToughness and grit to work outside in all kinds of weatherStrong organizational and communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyPhysical stamina to kneel, bend, squat and climb, as well as lift up to 45 poundsValid driver’s license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location.This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between$50,000 and $65,000 annually.We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent WizardDent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:$20-$26+ flat rate with weekly pay! (negotiable based on experience)The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Schneider Electric has an opportunity for a HVAC Building Automation Technician in either West Chester, Columbus or Dayton, OH areas.Schneider Electriccreates connected technologies that reshape industries, transform cities and enrich lives. Our 135,000+employees thrive in more than 100 countries. From the simplest of switches to complex operational systems, our technology, software and services improve the way our customers manage and automate their operations. Help us deliver solutions that ensure Life Is On everywhere, for everyone and at every moment.http://www.youtube.com/watch v=YtExntUe89cGreat people make Schneider Electric a great company.What do you get to do in this position Services and maintains complex HVAC Building Automation SystemsDiagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Electrical troubleshooting knowledgeProvides sketches of field changes and discrepancies for engineering corrections and drawingsCommunicates with customer upon arrival and before leaving the work site.Meets regularly with customer to become familiar with operating problems.Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement.Acts as a technical resource to team and customer as needed.Provides start-up and checkout documentation to the installation team for use in commissioning and validationWorking knowledge of MS Office, File Structure, VISIO.Knowledge of basic BACNET/LON/MODBUS protocols. Must be highly organized and possess the ability to work in a high paced environment with the ability to prioritize tasks to meet the schedules given by the leadershipDemonstrate the ability to operate independently and autonomously and take ownership of all tasks. Excellent oral and written communication skills and team orientedQualifications:3+ years of field experience in the HVAC controls industry; preferably with troubleshooting, maintenance, and service Technical, hands-on experience with commissioning and programming of DDC controls. Knowledge of HVAC systems and equipment. The ability to communicate technical material to a nontechnical audience Proficiency with writing code for controller sequence of operations Proficiency with integration protocols (BACnet, Lon works, Modbus, etc.) .Requirements:Two-year (2) degree in a related technical field required or related work experienceExperience in HVAC building Automation a must!Proficiency with Microsoft Office products (Word, Excel, PowerPoint, Visio) and general windows environment Excellent customer service skillsExcellent verbal and written skillsCustomer-focused, results-oriented professional, and strong team player. Self-starter that demonstrates initiative. Ability to manage multiple priorities and stay organized.#L1-KJ1 Schneider Electric offers a robust benefits package to support our employees such as flexible work arrangements, paid family leave, 401(k)+ match, and more. Click here to find out more about working with us: http://se.com/us/careers. We seek out and reward people for putting the customer first, being disruptive to the status quo, embracing different perspectives, continuously learning, and acting like owners. We’re recognized around the world for welcoming people as they are. We create an inclusive culture where all forms of diversity are seen as a real value for the company. See what our people have to say about working for Schneider Electric. Why us Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive.25.7bn global revenue137 000+ employees in 100+ countries45% of revenue from IoT5% of revenue devoted for R&DYou must submit an online application to be considered for any position with us. This position will be posted until filledIt is the policy of Schneider Electricto provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.

$23.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) On-the-job training to expand your automotive abilities and help to obtain ASE Certificates Paid time off Medical, dental and other insurance Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses Retirement benefits (401k) Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving record At least 2 years of auto repair experience or coursework with automotive certifications 1 ASE certification (ability to acquire 2 additional ASE certifications within first year) Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel Comfortable working in a mechanical shop with moderate or loud noise levels Must have a complete set of tools required for auto repair and maintenance Basic computer skills including typing, data entry Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles Must be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. ColumbusOhioUnited States of America

Job Description Job Title:Automotive Technician / MechanicLocation: 8555 Sancus Blvd, Columbus, OH 43240Job Overview:This brand-new state-of-the-art facility is scheduled to open in September 2024. Interviews will begin in August 2024.We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our guest.Responsibilities include, but are not limited to:Technicians use their knowledge & skills to diagnose and fix vehicles for ourguestContinuously build experience as an automotive mechanic across a wide range of domestic and foreign vehiclesComplete full, accurate, and honest courtesy vehicle inspectionsWork as part of a team to troubleshoot guest concerns quickly and effectivelyFollow and promote our high standards of safety, cleanliness, and organizationWork closely with the service department and effectively communicate guest concernsWork together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications:Positive attitude and a desire to serve customers3+ years of experience as an automotive technician/mechanicASE Certifications preferred, or a plan to achieveCapable of diagnosing and repairing all makes/models of vehiclesMeet or exceed hourly goalsAptitude for learning additional skills and processesProfessional appearance and strong communicationA desire for long-term career developmentPhysical Requirements:Occasionally lift and/or move over 100 poundsBe able to work with tools on vehicles lifted above their headWork in tight spaces as dictated by the vehicle’s needed repairHave the needed dexterity in order to efficiently use hand toolsWalk/stand for the majority of their workdayDrive manual transmissions vehiclesEfficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center.All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Overview: With over 150 years of experience, and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. WHY JOIN US We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: Competitive pay Medical, Dental, Vision and Prescription coverage Paid vacation and holidays 401(K) match Life insurance, AD&D and long-term disability Tuition reimbursement Opportunities available nationwide Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more Pet Insurance Legal Plan, and ID Theft Protection Responsibilities: The HVAC Branch Manager leads the administrative team in supporting our HVAC and refrigeration technicians in the field. This manager routinely works directly with service and install technicians, dispatch personnel, and other managers to ensure customer satisfaction while meeting departmental goals and objectives. Presenting themselves as a senior company representative, the Branch Manager often communicates directly with customers, vendors, and suppliers to ensure accurate communication of job or project status and requirements. Interviews, screens, and evaluates administrative personnel to meet workload demands.Schedules, for HVAC technicians to meet service demands and customer expectations.Reviews technicians' work, techniques, and safety requirements to ensure quality meets established standards, and makes recommendations to improve quality and productivity.Compliance with all applicable health and safety regulations, policies, and established work practices. Ensures appropriate employee safety training and compliance is completed.Responsible for staff performance appraisals, and reviews and for setting improvement goals per company requirements.Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency, and training requirements.Communicates daily with dispatch reporting on project information, estimated time to complete jobs, labor hours, and parts or material used.Reviews work orders, invoices, and time reports for accuracy and maintains minimal accounts receivables.Develops and monitors budgets, goals, and objectives to ensure departmental profitability.Maintains communication with vendors and factory personnel concerning warranty issues, product recall notices, operational problems with products, premature failures, and other issues.Monitors assigned service vehicles to ensure they are being maintained, and operated according to company policy, and that an adequate inventory of parts and materials are maintained. Qualifications: 5+ years of successful and recent HVAC and Refrigeration service experience.2+ years of HVAC/R Service Management experience helpful.Two years of technical training or a bachelor's / master's degree is preferred.Solid working knowledge of Word, Excel, and Outlook and the ability to learn new systems.Valid driver's license.Problem-solving and conflict-management skills.Detail-oriented and highly organized with the ability to handle multiple tasks and assignments.Ability to generate ideas and create processes to grow the service department.Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to work well with management, executive leadership, support staff, and technicians.Ability and willingness to work a non-standard schedule: nights, weekends, and holidays, as necessary. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Req ID:436994Address: 6023 Alum Creek Drive Obetz, OH, 43137Benefits: * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Hepaco, a by Clean Harbors company, in Groveport, OH is looking for a Field Service Project Managerto work at various customer locations, and to join their safety conscious team! This team member is responsible for providing the full range of management, leadership, and supervision required for the successful acquisition, performance, and completion of projects.Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priority and we live it 3-6-5!Comprehensive health benefits coverage after 30 days of full-time employmentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid trainingPositive and safe work environment responsibilities for Internal CandidatesPerforms all aspects of project management duties including, but not limited to contract management, quality control, project supervision, accounting, health & safety and resource managementResponsible for managing all phases of proposal preparation/submission and thoroughly reviewing contracts and negotiated changes prior to contract execution to assure awareness of contents and requirements and ability to perform workParticipate fully in marketing efforts in establishing new accounts, servicing existing accounts, and procuring new business opportunitiesEnsure that items for field use are purchased in accordance with established procurement regulations and are within budgetary limitsPersonnel management of assigned department to include recruiting, job assignments, performance appraisals, disciplinary actions, etc.Responsible for assuring that all company-owned vehicles and equipment operate properly and safety and that required periodic maintenance and repairs are accomplishedEnsure that project cost reporting, revenue reporting, and other financial data are accurate and submitted timelyResponsible for contacting client to arrange payment on past due accountsPerforms other duties as assigned or requiredBachelor’s degree in the subject area preferred and progressively responsible management experience in assigned or related field; or any equivalent combination of training, education and experience that demonstrates the ability to perform the duties of the positionExcellent verbal and written communication skills with the ability to effectively present and communicate with individuals at all levelsMust be computer literate, and proficient with the MS Office SuiteMust be able to work independently and meet deadlines under pressure in a fast-paced environmentHepaco, a Clean Harbors company is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class.Hepaco, a Clean Harbors company is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*HEP

Shift - Tuesday to Friday, 10-hour shift, 2 PM to 12:30 AM, OT as neededWhat this job involves – The HVAC Mechanic will perform HVAC and mechanical preventive maintenance and repairs primarily on controlled temperature units. This will include hands-on work to complete the necessary work within Jones Lang LaSalle standards and guidelines.What is your day to day Performs troubleshooting, service, and maintenance on Controlled Temperature Units (CTU), HVAC systems including but not limited to controls, air handlers, BMS, BAS, actuators, pumps, valves, dampers, and motors.Operate and maintain the following systems: heating hot water & steam, ventilation equip., air conditioning, water conditioning – treatment and refrigeration skids for cool rooms.Operate & maintain ancillary systems such as cooling towers, pumps, chillers, etc.Install trouble-shoot maintain & repair air conditioning and refrigeration equipment related piping within the unit and controls. Experience in pneumatic and DDC controls, wiring methods, and instrumentation is requiredWork from CAD drawings, prints, schematics, sketches, or verbal instructionsAdapt and install specialized cooling and or heating devices for specific requirements.Experience with water treatment methods, and procedures for cooling and hot water circulation systems including testing of basic parameter, troubleshooting system problems, and repairing of equipment as needed.Performs installation and replacement of relevant HVAC system components.Performs work on a variety of non-HVAC building systems including FLS, doors, plumbing, and electrical as needed.Maintains good tenant relations through prompt and courteous response to tenant requests within the guidelines set forth by JLL.Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required.Contributes and own areas of refrigeration management.Perform work outside of the trade to include other duties as assigned by management including but not limited to painting, light bulb replacement, installation of pipe, plumbing and other maintenance related tasks.Required:Electronic and pneumatic controls and diagrams.1+ years of experience working as a refrigeration & air conditioning mechanic in an industrial or research environment.1+ years experienced in refrigeration and HVAC practices.Preferred:Experience working in a GMP environment2-3 years’ validated CMMS experienceEPA 608 UniversalKnowledge of BAS (Building Automation System) or QBAS (Qualified Building Automation System)Work Environment:Working inside of automated manufacturing distribution center#HVACjobs

Paid Time Off · Health Benefits Day One · 401K Match · No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary The Senior Maintenance Technician is a highly proficient experienced-level Technician capable of performing a wide variety of work to ensure that the facilities and equipment are maintained in a safe and effective working condition. Responsibilities Responsibilities include, but are not limited to, modification and repair activities in assigned maintenance operations areas which may include buildings, material handling, offices, lighting, electrical systems and plumbing in any of the distribution centers; and performs related work as required.Qualifications & Experience 5+ years of proven verifiable assignment-related maintenance experience, or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job as listed above.Minimum of 5 year maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenance.Experience with maintenance in a distribution center settingPossession of a valid driver’s license and a satisfactory driving record.Electrical experience with high and low voltage, AC and DC.Technical school or training desired.Computer skills navigating email/Microsoft Suite. Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business ResultsBenefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. Visit bbwbenefits.com for details. View Benefits Information The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer.We do not make employment decisions based on an individual’s race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all role(s) are filled.

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. The Generation Service Technician has safety, customer satisfaction, and business responsibilities within data center operations. The person in this role is responsible for identifying, troubleshooting, diagnosing and providing quality repairs of electrical generator systems and related engine mechanical failures. The Generator Service Technician is both the technical expert and primary customer support contact to the customer, and is therefore responsible for continually communicating with the customer to provide an exceptional customer experience and drive data center up-time and availability. Key job responsibilities- Know and follow all Company safety rules, including maintaining a safe, clean, and orderly work area, and fully participate in company accident prevention and safety improvement activities- Respond to customer requests - Travel to designated sites and perform professional quality field service repairs consistent with company standards- Advise the Generator Service Manager of parts needed for necessary repairs- Keep Generator Service Manager continually apprised, and utilize leadership to assist in answering customer questions and problems when necessary- Document detailed, complete and legible descriptions of all repair operations performed- Accurately record time, expenses, and mileage- Travel 80-90% of the time in an assigned region, and/or work overtime, weekends, or holidays, sometimes on short notice- Lift up to 50 lbs frequently; pushing and pulling a maximum force of 50 lbs- Wear Personal Protective Equipment (PPE) Protective Glasses, Protective Gloves, and Protective Footwear as requiredAbout the teamAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS- High School Diploma or equivalent - 5+ years of hands-on working on electrical generator systems- 1+ years of experience troubleshooting and repair of equipment using standard safety proceduresPREFERRED QUALIFICATIONS- 2-year technical training program completion, or completion of a 3 year apprenticeship- Fully trained on Cummins, MTU, and Caterpillar products- Knowledge of engines, generators and load transfer equipment- Technical knowledge of electrical generator systems and related engine mechanical failures- Meets/exceeds Amazon’s leadership principles requirements for this roleAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctionsContact customer representative and ascertain equipment/systems problemsDiagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sitesFollow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipmentService, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnellRead and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manualsExhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfactionComplete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computersObtain customer signature upon completed service call assignmentParticipate in a scheduled On-call rotationHelp to train or mentor others on the service teamProvide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of servicePerform other duties as assignedHow you will do itThis skilled position involves troubling shooting and repairing installed systems. Including panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testing.Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks.Candidate must possess excellent written/verbal communication and outstanding customer service skills.Position involves the programming of fire alarm, security, and access control system panels.Experience CCTV and IT and IP networks a plus.Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner.On call and after hours work required on occasion at customer need.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look for:Required5+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems.NICET ll Level II certification - PreferredExperience in reading and interpreting blueprints, submittals, and operational/product manuals.Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.High School Diploma or equivalentAbility to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etcAbility to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Retain any licenses that are required by National, State and Local codes.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: This position is responsible for the management, training, scheduling and development of maintenance personnel providing support to the Production/Processing areas at the West Jefferson, OH facility. This newly constructed facility will produce protein drinks. PM shift.Assumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks.Supervision of maintenance crew.Production support in the Production / Processing areas.Creates work orders and PMs.Responsible for installing new equipment.Troubleshoots problems with equipment.Provides a safe work environment for employees.Recognizes and takes steps to resolve operating problems in order to minimize their impact on the operations.Cooperates with all departments to assure a coordinated work relationship exists at all times.Keeps accurate and up-to-date records (I.E. timecards, downtime records, absentee records, etc.)Enforces company policies in a fair and consistent manner.Encourages suggestions from employees which will improve production, quality, safety and/or control costs of production.Keeps manager informed on operating and/or employee problems which may require their attention or knowledge.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained.Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Responsible for Food Safety and Food Quality of MFI products.#firstinpeople Qualifications: Associate’s degree (AA) or two-year technical certificate in Mechanics and Electronics or a related field Two years of mechanical and electrical maintenance and supervisory experience; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.PREFERRED EDUCATION, EXPERIENCE AND SKILLS: Knowledge and experience supporting Aseptic filling operations. Tetra Pak experience a plus.Knowledge of basic mechanics, welding, electrical, fabrication, preventative maintenance, plant operations and government safety regulations.Able to supervise department personnel in a fair and consistent manner.Be able to recognize problem situations and take appropriate steps to resolve.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information in one-on-one and in group situations. Ability to respond to questions from internal/external customers/vendors at all levels including management.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesUnion benefitsMatching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Must be able to work a 10:30pm-7am shift Education Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $26.75 / hour #CAZL ExperienceRequiredAble to work a 3rd shift ( 10:30pm- 7am )1 year(s): Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.1 year(s): Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

As our Maintenance Mechanic at Mauser Packaging Solutions in Mount Vernon, OH, you keep our line equipment running smoothly so we can deliver quality products to our customers on time. During shifts, your main job is to address any issues on the line as they crop up. You must be quick on your feet to get to the line, troubleshoot the issue, and repair it as quickly as possible, ensuring minimal downtime and complete safety at all times. You will also do preventative maintenance, repairs, and updates that cannot be done while the line is running. To thrive in this role, you must have electrical knowledge and experience, an impeccable safety record, and you must be reliable and show initiative. You show up every day eager to dive in and address issues you see, without being told. You are responsible for keeping the line moving safely and you take a lot of pride in that. Here’s what you can expect on a typical day as a Maintenance Mechanic on our team at Mauser Packaging Solutions: Safety is our number one priority. You’ll learn our plant safety guidelines and pass all required safety training including lockout/tagout, housekeeping, and 5S standards.Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyPerform other related duties as assignedWe take pride in our output and you take pride in ensuring our equipment is running smoothly and safely.High-Speed, Loud Environment. Some areas of the plant get very warm in the summer.Hard work. Each day you’ll be bending, lifting, stooping, and the like to repair equipment. You’ll work with PLC equipment, multiple small tools, and high-voltage equipment. You are responsible for keeping your equipment in safe, usable condition and your area safe and tidy at all times.Supportive Team. Everybody plays an integral part in this work-family as we strive to reach all of our goals and deliver an excellent product.Excellent Pay and Benefits. We offer an excellent benefits package. We know you work hard and we want to take care of you and your family. Job Skills & Qualifications Required: High school diploma or equivalent5+ years of proven work experience in a maintenance within a manufacturing environment; or equivalent combination of training and experienceAble to demonstrate the ability to maintain, troubleshoot and repair electrical equipment and mechanical systems involving electrical, plumbing, pneumatic, and hydraulic repair or replacement, including blown fuses and tripped breakers.Knowledge of PLC Logic, and ability to read schematics and blueprints.Understand electrical panel and drive components.Understand gear trains, shafts/journals, pulleys, and bearings.Good problem-solving skills.Must be able to draw a 3 phase motor control CircuitBasic computer skills including Microsoft OfficePLC experience in a manufacturing settingMust be able to work Nights / Weekends Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Columbus, OH!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Custodian to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be performing housekeeping and cleaning activities of the facility in office spaces, kitchen areas, common areas, plant / production floor, restroom facilities, and parking lots / grounds areas. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses.What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Utilize equipment to perform housekeeping operations, including wet and dry mops, brooms, floor scrubbers, vacuum cleaners, cleaning supplies, towels, steel wool, carts, and trash cans. Ensure restrooms, kitchen, and breakroom areas are cleaned and stocked. Remove trash and place it in the designated area. Maintain window cleanliness. Uphold furniture by dusting and ensure builders hardware is satisfactory. Relocate light furniture to assigned areas as directed. Replace light bulbs in overhead fixtures when directed. Perform cleaning operations in the office areas, production floor, outside of the facility, and other property areas as assigned by the Maintenance Supervisor. Perform other duties as assigned by leadership QualificationsWhat we're looking for: Must be at least 16 years of age or older Must be 18 years of age or older to work in heights and electricity High school education and/or GED equivalent is preferred. Knowledge of cleaning materials and equipment to ensure safe usage of general cleaning chemicals. Ability to work independently with little or no supervision. Must be able to operate floor cleaning equipment and other tools as required. Ability to read, comprehend and interpret procedures and instructions in English. Ability to effectively present information and respond to questions from co-workers and managers. Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

Our client, an electric utility companyis seeking a Trans Right of Way Agent to join their team. The ideal candidate will have strong communication, conflict management and organizational skills which will align successfully in the organization.CAD Designer Pay Rate:$23-27/hr.Location: New Albany, OHDuration: 12-month contract, potential to convertHybrid Work ScheduleJob Responsibilities: Prepare maps using computer aided drafting via sketches, schematics, and other engineering related drawings.Create, revise, and maintain detailed engineering and record drawings, maps, and sketches using AutoCAD.Perform mathematical calculations required to accomplish assigned work.Operate reproduction machines, plotters, and other duplicating equipment.Promote and support the Company’s’ Accidnet Prevention and Safety and Health programs.Read vendors’ prints, shop and other drawings, and equipment operating instruction, and incorporate that information in the work being performed. Prepare and review plan and profile drawings.Prepare right of way and condemnation drawings. Job Requirements Associates degree in applied science, drafting and computer aided design or in civil, electrical, or mechanical engineering technology.HS diploma w/ 4 years of relevant experience in electrical utility and/or related industrial drafting and/or computer aided drafting.Proficiency in MicroStation and/or AutoCAD is required. What’s in it for me Benefits (Medical, Dental, Vision, 401k)Weekly pay with direct depositConsultant CareJob security - long-term assignments - some of our contractors have been on assignment for 5+ years!Opportunity to work for a company that has been around since 1906 If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson WellsManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Description Wallick Communities is searching for a Sr. Maintenance Technician to join the team supporting the Sawyer Manor and Trevitt Heights apartments in Columbus, Ohio. The pay range for this position is $25 - $28 per hour. Wallick Communities gives low-income families, single parents, and senior citizens a place called “home” – thanks to five decades of experience in developing, building, managing and overseeing affordable multi-family housing and assisted-living communities across the mid-west. 55 years serving our communities24,000+ residents call our community’s home 9 states and growing 1000+ associates 92% associate engagement score Wallick Mission: Opening doors to homes, opportunity, and hope. Wallick Values: Our Values flow directly from our Mission and set the expectation for how all associates work together. These values are: Care Character Collaboration Working at Wallick Communities: Diversity, equity, inclusion, plus belonging. Four impactful words. One powerful and transformative journey. Here at Wallick, we know that when we invest in the equity of each group, all groups benefit. It’s not about one person, one idea, nor any one action. It’s about what we can accomplish together. Join us and work towards creating an inclusive and diverse workforce experience at Wallick. The work - How you will contribute: In accordance with the Wallick Mission and Values, The Sr. Maintenance Technician will complete specific maintenance functions in a timely manner as directed by the Maintenance Manager or Community Manager, taking care to ensure our residents needs are met and comfortable homes maintained to the highest standards. Essential Functions and Responsibilities: Execute various site maintenance projects and unit turns as directed by leadership. Responsible for the timely completion of work orders within the community. Responsible for emergency maintenance response within the community which include on-call rotation.Maintain specific levels of certification as required for the position. Responsible for maintaining the communities to Company standards. Training and mentoring other less experienced maintenance staff.Assist with capital needs bidding.Assist with Reac readiness. Perform other related duties as assigned. About You: You have 3 or more years of experience in maintenance or a related field, preferably in residential housing. You have strong knowledge of HVAC systems, electrical systems, and plumbing systems. Certifications are a plus. You have basic knowledge of applicable law governing residential housing strongly preferred. You can use complex tools and equipment, such as welding equipment and heavy machinery. You are proficient with basic computer skills and smart phone. You have knowledge of Reac requirements. You have excellent problem-solving skills and attention to detail. You have strong communication and customer service skills. You have the experience and ability to lead and train other staff members. You have a Valid driver's license and reliable transportation. Physical Demands: Position requires extensive walking, stooping/bending, balancing, kneeling, squatting, and climbing. Requires the ability to lift 50 lbs. Requires talking, seeing, and hearing with reasonable accommodation. Work Environment: Travel between communities within the district may be required, depending on need. Position requires work to be performed indoors and outside. Indoor working conditions are often inside a residence within the community, a communal area, or in the designated maintenance shop area. Outside work is throughout the community grounds and outdoor communal areas. Benefits: Employee Stock Ownership Plan Paid Parental LeaveGenerous time away from work packageHealth, Dental and Vision insurance effective the first day of the next pay period following the date of hire, typically within 2 weeksGym membership or Fitness equipment reimbursementCompany paid life and long-term disability insuranceVoluntary life, short-term disability, accident, critical illness, and hospital indemnity coverage401(k) with a company match after 90 daysTuition reimbursementPet insurance Candidates must successfully pass a pre-employment drug screen and background check.

What You'll Do:As an Vehicle Service Specialist (aka auto technician), you will help keep our guests safe on the road by providing top-tier customer service while performing preventative maintenance services for their vehicles. Through our award-winning training program, you will learn to change oil, check and refill fluids, rotate tires, test and replace batteries, inspect and replace lights and wipers, perform an 18-point safety check, and more. You'll work as a team to provide fast, easy, trusted services to our guests, and have fun doing it!At VIOC, "It all starts with our people." Creating a diverse and welcoming workplace with team members from varied backgrounds and experiences is our highest priority. People of color, women, LGBTQIA+, veterans, and persons with disabilities are strongly encouraged to apply.The perks and benefits we'll provide you*:Competitive weekly pay - $15.75/HourPaid on-the-job training - No previous automotive experience is requiredNo late evenings or holidaysPaid time off (PTO), and holiday payTuition and certification assistance and access to a FREE online universityMedical and prescription drug coverage - with Health Savings Account contributionsDental, vision, and 401(k) savings plans - 100% match up to 5% We promote from within - a commitment we are passionate aboutBack-up Child and Elder CareCompany provided uniforms and tools50% discount on Valvoline Instant Oil Change automotive services What you'll need to succeed: Flexibility to work weekendsAn eagerness to learn, a friendly attitude, and a desire to be part of a customer-focused teamAbility to stand for up to 8 hours, climb stairs, and occasionally lift up to 50 poundsMobility to crouch, bend, twist, and work with your hands above your headComfortable working in a non-climate-controlled environmentEnglish fluency in reading, writing, and speakingHow you'll advance in your career:At Valvoline Instant Oil Change (VIOC), your roadmap to career advancement is limitless! Click here to learn more and to hear from some of our 'Vamily' members. With an award-winning training program, commitment to safety, and fair and honest values, we're here to help you reach every milestone.*Terms and conditions apply, and benefits may differ depending on locationValvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.

Overview: Boyd's Tire & Service has been providing drivers in Central Ohio with the best automotive products and services since 1996. We strive to provide you with high-quality tires and reliable car repairs at our several locations in Columbus, Blacklick, Hilliard, Lewis Center, Marysville, and Central Ohio. Our staff is ready to go above and beyond to help you meet your needs, to get you back on the road, satisfied.The Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers and Boyd's Tire standards. COMPENSATION : VARIES UPON EXPERIENCE*Jr Auto Tech: $20 to $25/HR* Sr Auto Tech: $25 to $40/HR Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Automotive Technician Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement! Qualifications: Prefer a minimum of one unexpired ASE or equivalent experience or training. Possess valid driver's license or obtain a valid driver's license within 30 days of hire date. Ability to work a minimum of five days, including Saturdays. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Job SummaryAn Assistant Meat Team Leader's first responsibility is to assist the Meat Manager in providing leadership in the Meat Department by directing and managing Team Members, ordering raw materials and supplies, and implementing merchandising initiatives to stimulate the growth of the business while meeting customer requirements and maximizing profits. Job DescriptionExperience Required: 3 to 5 yearsExperience Desired: Prior management experience in Meat operations/ or related field; Customer Service Experience; Knowledge of Market District meat operational procedures; Ability to read and interpret Profit and Loss statementEducation Desired: High school diploma or equivalentCertification or Licensing Required: Meat cutting certificationLifting Requirement: Up to 50 poundsAge Requirement: At least 18 years of ageJob ResponsibilitiesAssist Meat Manager in running of Meat Department by writing orders, assigning job assignments, andmaintaining conditions in department. Provide customers with variety of cuts of meat and filling sales cases by assisting in cutting of meat. Maintain levels of product in sales cases by inspecting product levels and preparing products for case. Ensure that proper procedures are being followed so that store meets out-of-stock percentage goal. Promote the continuous development of Team Member and identify candidates for ManagementDevelopment Process. Ability to understand and adhere to the Collective Bargaining Agreement. Unloading and checking in orders. Stocking frozen foods and lunch meats to sales case and unloading deliveries in cooler and freezer. Maintain cold-chain process. It is essential to model, understand and promote safety processes and requirements according to the Health Department, HACCP, OSHA, along with our Company's policies and procedures. With these safe work practices and properly maintained equipment, we will protect Ourselves, our Team Members, Our Customers and our Banner. Display a commitment to learn about food and share food knowledge with fellow team members andcustomers. Actively demonstrate appropriate suggestive selling techniques. Conduct business, at all times, with a clear understanding that customer service is a significant point ofdifference for our Company. Every interaction, whether with an internal or external customer, is to be conducted with the highest degree of integrity and with an understanding that the end result is todeliver service in an unparalleled manner. Actively participate in, and promote, an environment which embraces diversity, inclusion, and respect forTeam Members, Customers, Vendors, and the Community. Maintain cleanliness of equipment, tables, utensils, floor (to ensure safety), and sanitation regulations aremet. About UsAt Giant Eagle Inc., we’re more than just food, fuel and convenience. We’re one giant family of diverse and talented Team Members. Our people are the heart and soul of our company. It’s why we strive to create a nurturing environment that offers countless career opportunities to grow. Deep caring and solid family values are what makes us one of the top work places for jobs in the Greater Pittsburgh, Cleveland, Columbus and Indianapolis Areas. From our Warehouses to our GetGo’s, our grocery Stores through our Corporate home office, we are working together to put food on shoppers' tables and smiles on their faces. We’re always searching for the best Team Members to welcome to our family. We invite you to join our Giant Eagle family. Come start a lasting career with us.

Job SummaryOur Meat Team Leader manages the entire Meat Team and keeps it running like a well-oiled machine. Leaders are accountable for the operating performance of the department at all times. Be a Leader by representing the organization in a professional manner. Promote and develop individuals with mutual respect, inclusion, diversity and dignity. Coach Team Members on a regular basis with timely feedback identify opportunities for development and coach for success. "Job DescriptionExperience Required: Retail work experience or Store Leader recommendation; Meat CuttingExperience Desired: Retail leadership or supervisory experience; Successful performance as a Peer Trainer or other similar role; Successful performance as an in-store champion (e. g., safety, service, wellness) or similar role; Demonstrated product knowledge relevant to department; Satisfactory performance and discipline recordEducation Desired: High school diploma or equivalentCertification or Licensing Required: Meat Cutting, Meat Processing or Meat ScienceLifting Requirement: Up to 100 poundsTravel Required: NoneAge Requirement: At least 18 years of ageJob ResponsibilitiesYour principal, main, major or most important duty includes one or some combination of the following tasks:1. interview, select and train Team Members;2. direct the work of Team Members;3. appraise Team Members' productivity and efficiency for the purpose of recommending promotions or other changes in status;4. handle Team Member issues including, but not limited to complaints;5. discipline Team Members;6. plan the work;7. distribute or assign the work among Team Members;8. provide for the safety and security of Team Members or the store;9. manage the budget for your department or location;10. manage inventory for your department or location; or11. monitor or implement compliance measuresDirect, oversee, and evaluate training provided to department Team Members to reduce turnover, promote efficiency and control labor costs. Provide motivational leadership to an amazing team by focusing on respect and by setting an exemplary example. Identify strengths and opportunities of the team and think strategically when making moves and scheduling. Develop future leaders, identify Team Members who are poised to rise through the ranks and remember our people are our best asset! Nurture an environment of inclusion and diversity, giving each Team Member a voice. Maintain safety as the top priority in all aspects of our work: for Team Members, for guests and for products. Inspire the team and our guests with a passion for food and a willingness to go the extra mile to provide the best product. Set and reach aggressive sales and profit goals by making suggestions when appropriate, while also managing shrink. Establish an ongoing communication plan with the team, ensuring that all Team Members are informed and prepared to put their best food forward! Communicate with the merchandising team to ensure that promotions are properly communicated to Team Members and guests. Make innovative plans and suggestions to improve our business. Review and analyze both stores financial, LOB reports, and historical reports to improve performance in sales, profits, shrink, labor controls, and reduction. Oversee period inventories for accuracy and monitor weekly fluctuations in inventory and shrink dollars. About UsAt Giant Eagle Inc., we’re more than just food, fuel and convenience. We’re one giant family of diverse and talented Team Members. Our people are the heart and soul of our company. It’s why we strive to create a nurturing environment that offers countless career opportunities to grow. Deep caring and solid family values are what makes us one of the top work places for jobs in the Greater Pittsburgh, Cleveland, Columbus and Indianapolis Areas. From our Warehouses to our GetGo’s, our grocery Stores through our Corporate home office, we are working together to put food on shoppers' tables and smiles on their faces. We’re always searching for the best Team Members to welcome to our family. We invite you to join our Giant Eagle family. Come start a lasting career with us.

1. Performs regularly scheduled preventative maintenance on general electrical and plumbing systems, conveyor systems, electronic sorters, forklifts and various other powered material handling equipment. 2. Performs troubleshooting on equipment breakdown as instructed including disassembly, repair, parts replacement and parts fabrication to minimize equipment downtime. 3. Performs general carpentry, painting, electrical, welding, plumbing and HVAC installations as required. 4. Installs and repairs DC storage racks as required. 5. Maintains and completes various maintenance documents including but not limited to work order requests, preventative maintenance and daily job breakdown summaries, parts requests and parts purchase orders. 6. Performs semi-routine duties where some judgment is required. Work is performed under defined and uniform procedures. 7. Exhibits reasonable care and operation of powered material handling equipment. 8. Maintains the integrity of our Mission, Vision and Values statement while performing daily job duties.Qualification1. Strong English, reading and Math skills required. 2. Three to five years electrical, mechanical and maintenance related experience is required. 3. Strong mechanical, welding, carpentry, plumbing and AC/DC electrical circuitry knowledge through 440, 3-phase required. 4. Excellent hand and eye coordination required. Ability to climb and work at high elevations required. 5. Ability to interpret blueprints, schematics, utilize basic hand tools and electrical and/or electronic test equipment including volt/ohm meters and amp probes strongly preferred. 6. Ability to handle multiple tasks, be detail oriented, meet department standards and perform duties without immediate and constant supervision. 7. Previous Computer Maintenance Management System (CMMS) knowledge preferred. 8. Previous experience in the repair of powered material handling equipment strongly preferred. 9. Ability to perform physical activity at a sustained pace within the Distribution Center environment including walking, bending and lifting a minimum of 60 pounds is required.We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws.

Job Description Summary Performs maintenance and general repair services in specified markets of anywhere from 10-15 of our Kohl's stores, ensuring Company Brand Standards are maintained. Mileage is reimbursed for travel to and from the stores in the specified market. Performs all work in a quality manner following all safety rules and regulations. Responsible for meeting budgets and communicating effectively with both internal and external customers.ACCOUNTABILITIESGENERAL MAINTENANCEResponsible for timely and accurate completion of work orders as assigned by supervisorEnsures all necessary material and tools to perform daily work are available and kept in good condition (Kohl’s provides all needed tools)Performs Interior Store Repair and Maintenance as assigned by Territory Facilities Manager with a focus on Door (interior and exterior) and Plumbing (faucet, toilet, hot water heater, etc.) repairPerforms Interior Lighting and Electrical repairs including but not limited to lamp/ballast replacement, minor outlet repairs, once per year 90 minute emergency light testing and repairs, etc.Proficient in other Interior Repair and Maintenance items including but not limited to flooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, fixture, and stroller/ cart, and cleaning equipment repairsPerforms exterior maintenance of building including but not limited to low elevation (can be reached with a 12ft ladder), building painting, curb/ramp painting, power-washing, and minor Common Area Maintenance repairs of landscaping, signage, and concrete/asphaltIDENTIFY MAINTENANCE ISSUES Assists stores with Housekeeping problem solving with suggested solutions for Store Associate teams and Contract Cleaning providers to increase CLEAN presence in stores.Communicates safety and cleanliness issues and action plans to resolve with Store Management and Territory Facilities ManagerIdentifies Interior and Exterior maintenance issues that need resolution by exterior vendors and enters those issues into Web Based Facilities Management program for assignment and completionCommunicates recaps regularly to Territory Facilities Manager and/or Store and District Managers of stores visited, wins/opportunities found, as well as issues resolved on store visits. Communication may be verbal or email QUALIFICATIONSREQUIREDAbility to work independently without direct face to faceAbility to effectively communicate with multiple levels in Store organization verbally and writtenProficient in Microsoft Word, Excel, navigation of websites and able to utilize new computer systems, including smartphones1-4 years of prior maintenance work with a strong focus in Door, Plumbing, Electrical / Lighting, and general repair servicesPrior retail or office building maintenance experienceFamiliar with General Maintenance tools and tasksPREFERREDAbility to repair a variety of other interior/exterior issues as assigned by Supervisor including equipment and CAM itemsSPECIALModerate lifting – 25 to 50lbs on a regular basisDaily travel to local stores and occasional overnight travel to outlying stores. Mileage reimbursement provided.Ability to climb/work on ladders up to 12ft in height in order to address lighting, painting, etc. issuesValid driver’s license with a currently registered vehicle

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Put the wheels back in motion. Be a Wizard.As a Wheel Technician with Dent Wizard, you’ll use the latest tools and techniques to restore wheels and wheel covers – and we’ll reward you with uncapped earning potential. We’re hiring now in Columbus, OH.for a hard-working individual with the skills and outgoing personality to keep things rolling.Working on site at customer locations, you’ll fix cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels) using spray-painting equipment, power tools and work aids. The process involves removing the wheels, repairingthem in your mobile truck and placing them back on the vehicle.Tasks include painting surfaces, inspecting wheels, prepping and buffing defects, mixing colors and finishing.The Dent Wizard DifferenceUnlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision,401(k), paid vacation and moreOutstanding perks, including tools and supplies, company truck, gas card and moreEnvironmentally friendly trucks with explosion-proof filtration and fixtures, outfitted with premixed and pre-matched OEM wheel colorsIndependence to manage your day; no micromanagement Fun and dynamic team where everyone is supportive and has your backVariety of work on many types of cars, both new and old modelsThree weeks of trainingat one of our facilities with Master Wheel Techs to help you learn advanced techniques We pay for the training, pay you a salary while you train and provide travel and lodgingDevelop your technical and customer service skillsonce you are on the job, with assistance from experienced Techs Advancement potential into higher Tech levels (with more $) or management rolesWhat You Need to SucceedAuto painting experience or collision repair technical school training preferred but not requiredVision abilities including close, distance and color vision, depth perception and ability to adjust focusToughness and grit to work outside in all kinds of weatherStrong organizational and communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyPhysical stamina to kneel, bend, squat and climb, as well as lift up to 45 poundsValid driver’s license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location.This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between$50,000 and $65,000 annually.We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent WizardDent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Hepaco, a Clean Harbors company, in Columbus, OH is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Hepaco, a Clean Harbors company, is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priori ty and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsReliable transportationAbility to perform physical functions per Key ResponsibilitiesThis position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs.Perform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Valid Driver’s licensePrevious relevant labor experience Hepaco, a Clean Harbors company, is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class. Hepaco, a Clean Harbors company, is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Hepaco, a Clean Harbors company, is a Military & Veteran friendly company. #HEP *HEP

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. The Generation Service Technician has safety, customer satisfaction, and business responsibilities within data center operations. The person in this role is responsible for identifying, troubleshooting, diagnosing and providing quality repairs of electrical generator systems and related engine mechanical failures. The Generator Service Technician is both the technical expert and primary customer support contact to the customer, and is therefore responsible for continually communicating with the customer to provide an exceptional customer experience and drive data center up-time and availability. Key job responsibilities- Know and follow all Company safety rules, including maintaining a safe, clean, and orderly work area, and fully participate in company accident prevention and safety improvement activities- Respond to customer requests - Travel to designated sites and perform professional quality field service repairs consistent with company standards- Advise the Generator Service Manager of parts needed for necessary repairs- Keep Generator Service Manager continually apprised, and utilize leadership to assist in answering customer questions and problems when necessary- Document detailed, complete and legible descriptions of all repair operations performed- Accurately record time, expenses, and mileage- Travel 80-90% of the time in an assigned region, and/or work overtime, weekends, or holidays, sometimes on short notice- Lift up to 50 lbs frequently; pushing and pulling a maximum force of 50 lbs- Wear Personal Protective Equipment (PPE) Protective Glasses, Protective Gloves, and Protective Footwear as requiredAbout the teamAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS- High School Diploma or equivalent - 5+ years of hands-on working on electrical generator systems- 1+ years of experience troubleshooting and repair of equipment using standard safety proceduresPREFERRED QUALIFICATIONS- 2-year technical training program completion, or completion of a 3 year apprenticeship- Fully trained on Cummins, MTU, and Caterpillar products- Knowledge of engines, generators and load transfer equipment- Technical knowledge of electrical generator systems and related engine mechanical failures- Meets/exceeds Amazon’s leadership principles requirements for this roleAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

What we offer:Competitive Starting PayHealth Savings Account (HSA)Tuition ReimbursementPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceLife Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Fire Suppression systems and product lines as well as similar competitive manufacturers’ product lines.How you will do it:Work with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredFire alarm license and able to obtain and retain any licenses that are required by National, State and Local codes.3 years' experience for this role documented service experience in fire alarm or fire sprinkler.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.PreferredNICET certification Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Columbus, OH!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Description We are currently seeking a full-time Maintenance Technician to support the Renaissance Village and Framingham Village apartments in Columbus, Ohio. The pay range for this position is $21 - $24 per hour. Wallick Communities gives low-income families, single parents, and senior citizens a place called “home” – thanks to five decades of experience in developing, building, managing and overseeing affordable multi-family housing and assisted-living communities across the mid-west. 55 years serving our communities24,000+ residents call our community’s home 9 states and growing 1000+ associates 92% associate engagement score Wallick Mission: Opening doors to homes, opportunity, and hope. Wallick Values: Our Values flow directly from our Mission and set the expectation for how all associates work together. These values are: Care Character Collaboration Working at Wallick Communities: Diversity, equity, inclusion, plus belonging. Four impactful words. One powerful and transformative journey. Here at Wallick, we know that when we invest in the equity of each group, all groups benefit. It’s not about one person, one idea, nor any one action. It’s about what we can accomplish together. Join us and work towards creating an inclusive and diverse workforce experience at Wallick. The work - How you will contribute: In accordance with the Wallick Mission and Values, the Facilities Maintenance Technician will perform general maintenance duties for communities within the district in a timely manner, taking care to ensure our residents needs are met and comfortable homes maintained to the highest standards. Essential Functions and Responsibilities: Using company provided technology, complete various work orders for site maintenance projects as directed by the Community leader. Complete unit turns within as directed by the Community leader. Responsible for the timely completion of work orders within the community, and detailed completion notes documented in the work order tracking system. Responsible for emergency maintenance response within the district which may include on-call rotations. Maintain specific levels of certification as required for the position. Responsible for maintaining the communities within the district to Company standards. Perform other related duties as assigned. About You: You have a minimum of 1 year of prior maintenance experience. You have knowledge of plumbing and/or electrical. You have a valid driver's license with reliable transportation. You understand maintenance and repair. You pride yourself on providing a great experience for the resident, from respectful communication to quality and timeliness of repair. You are an adaptable and flexible problem solver. You have good written and verbal communication skills. You are detail oriented with the ability to balance and organize multiple priorities. Physical Demands: Position requires extensive walking, stooping/bending, balancing, kneeling, squatting, and climbing. Requires the ability to lift 50 lbs. Requires talking, seeing, and hearing with reasonable accommodation. Work Environment: Travel between communities within the district may be required, depending on need. Position requires work to be performed indoors and outside. Indoor working conditions are often inside a residence within the community, a communal area, or in the designated maintenance shop area. Outside work is throughout the community grounds and outdoor communal areas. Benefits: Employee Stock Ownership Plan Paid Parental LeaveGenerous time away from work packageHealth, Dental and Vision insurance effective the first day of the next pay period following the date of hire, typically within 2 weeksGym membership or Fitness equipment reimbursementCompany paid life and long-term disability insuranceVoluntary life, short-term disability, accident, critical illness, and hospital indemnity coverage401(k) with a company match after 90 daysTuition reimbursementPet insurance Candidates must successfully pass a pre-employment drug screen and background check.

Our client, a high profile global corporation,is seeking a Infrastructure Delivery/Cable Install Technician to join their team. As an Infrastructure Delivery/Cable Install Technician, you will be part of the installation teamsupporting day to day installation of servers and network equipment, structured cabling, and capacity management. The ideal candidate will be a proactive go-getter with strong technical aptitude and the ability to deal effectively with peoplewhich will align successfully in the organization. Job Title: Infrastructure Delivery Cable Install Technician Location: Dublin, OH Pay Range: $25.04/HR on Experis W2 What’s the Job Partner with cable vendors to install, inspect and troubleshoot cabling Installation and maintenance of copper and fiber cable infrastructureInstall, test and troubleshoot fiber optic and copper cabling, including patch panels and patch cords Ensure that the Data Center and vendor installations comply with all installation practices Report current status via ticketing system, status reports, email and Slack Manage work and priorities through ticketing system and workflows to complete customer requests and projects Work with a partner to move integrated enterprise equipment from loading docks into planned positions What’s Needed To be successful in this role you should possess technical aptitude, written and oral communications skills and the ability to deal effectively with people in a wide variety of situations. In addition, you must possess strong analytical skills with demonstrated problem solving ability. You will be able to leverage your experience exercising high levels of initiative, judgment, and diplomacy. Cabling, data center, infrastructure experienceBasic computer knowledge, MS SuiteMilitary experience preferred What’s in it for me Medical/Dental/Vision/401K/Holiday PayOpportunity to support cutting-edge technology of brand new service offeringsChance to convert to permanent with this companyProfessional growth opportunities If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

What You'll Do:As an Vehicle Service Specialist (aka auto technician), you will help keep our guests safe on the road by providing top-tier customer service while performing preventative maintenance services for their vehicles. Through our award-winning training program, you will learn to change oil, check and refill fluids, rotate tires, test and replace batteries, inspect and replace lights and wipers, perform an 18-point safety check, and more. You'll work as a team to provide fast, easy, trusted services to our guests, and have fun doing it!At VIOC, "It all starts with our people." Creating a diverse and welcoming workplace with team members from varied backgrounds and experiences is our highest priority. People of color, women, LGBTQIA+, veterans, and persons with disabilities are strongly encouraged to apply.The perks and benefits we'll provide you*:Competitive weekly pay - $15.75/HourPaid on-the-job training - No previous automotive experience is requiredNo late evenings or holidaysPaid time off (PTO), and holiday payTuition and certification assistance and access to a FREE online universityMedical and prescription drug coverage - with Health Savings Account contributionsDental, vision, and 401(k) savings plans - 100% match up to 5% We promote from within - a commitment we are passionate aboutBack-up Child and Elder CareCompany provided uniforms and tools50% discount on Valvoline Instant Oil Change automotive services What you'll need to succeed: Flexibility to work weekendsAn eagerness to learn, a friendly attitude, and a desire to be part of a customer-focused teamAbility to stand for up to 8 hours, climb stairs, and occasionally lift up to 50 poundsMobility to crouch, bend, twist, and work with your hands above your headComfortable working in a non-climate-controlled environmentEnglish fluency in reading, writing, and speakingHow you'll advance in your career:At Valvoline Instant Oil Change (VIOC), your roadmap to career advancement is limitless! Click here to learn more and to hear from some of our 'Vamily' members. With an award-winning training program, commitment to safety, and fair and honest values, we're here to help you reach every milestone.*Terms and conditions apply, and benefits may differ depending on locationValvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.

Responsibilities: Performs all assignments in accordance with safety specifications, instructions, and requirementsDemonstrates ability to meet production standards on specific assignments within required timeMaintains good housekeeping and clean work areas in assigned spaceReports all production waste to Production Lead or SupervisorResponsible for safety and quality throughout productionResponsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintainedPerforms other duties as required by Supervisor or ManagerFollows all company policies and procedures Requirements: High School diploma or equivalentExperience working in a Manufacturing EnvironmentAbility to work in a fast-paced environmentUnderstand plant safety guidelines and pass all required safety trainingMust be able to understand verbal and written instructionsTroubleshoot problems and report issuesMust work well in team environmentAbility to be on feet up to 8-12 hours per shiftUse of hands and fingers to perform job functionAbility to stoop, kneel, bend and climbAbility to lift up to 35lbs #INDMTVDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offerCompetitive pay.Paid vacation, holidays, and sick time.Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis skilled position involves installing, programming, troubleshooting, configuring, commissioning, and servicing Fire Alarm Systems at customer sites including panel repair/reprogramming, device replacement/repair, resolving low voltage circuit troubles, and system testing. Organize and effectively utilize technical resources, information, material, and support to ensure efficient execution of all assigned tasks.How you will do itPerform installation/programming on fire alarm systems.Respond to customer service calls in a timely and efficient manner, troubleshoot, and repair as needed.Will be required to participate in the after-hours service program.Communicates with central dispatch on current work order status and receives updates on outstanding customer issues.Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational/product manuals.Supervise and inspect the installation of equipment to meet customer and contract specifications.Completes necessary certification courses on internal and external products used.Complete and submit all required task-related, activity, productivity, and other documentation on time.What we look forRequired3+ years of documented experience in low voltage electrical systems, including Fire/Life Safety Systems, Access Control, CCTV, and Security Systems.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Experience with hand tools test equipment, multi-meter usage, digital analyzer, and commissioning devices.High School Diploma or equivalent required.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Demonstrates a prominent level of customer service.Ability to lead & work well with team members.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, a positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Able to obtain and retain any licenses that are required by National, State, and Local codes.Must always comply with safety guidelines.Working knowledge of electronic and digital test equipment.Basic understanding of Network concepts and architectures.Extended knowledge of DOS and Windows.Ability to multi-task and prioritize in a short period.This role requires a minimum of a State of Ohio Fire Protection LicenseNICET Level II REQUIREDPreferredTwo-year Associate's Degree in Electronics; Network; Computer Science or a related field.NICET level IIi or ability to obtain in the first year.JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.#LI-OnsiteJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.