SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.SNC is seeking a skilled and motivated Reliability and Maintainability Engineer. If you like solving complex logistics related engineering problems using your analytical skills, this is the opportunity for you! As a Reliability and Maintainability Engineer, you will perform detailed reviews and analysis of test, engineering design, safety, manufacturing process, reliability and maintainability to identify and document maintenance and support requirements and utilize logistics modeling techniques to predict maintenance levels and costs. As a cross-functional engineer, you are in charge of system-level ownership of new products and processes through the product life cycle. This includes overseeing the reliability & maintainability effort for a program, being the subject matter expert for reliability and maintainability engineering design, and direct interaction and engagement with the customer. You'll also review engineering requirements, recommend tool and test equipment, establish calibration requirements and assist in the design and development of maintenance engineering and logistics support for engineering projects.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. https://www.sncorp.com/company/business-areas/Responsibilities:Leading the reliability & maintainability engineering effortPerforming reliability prediction calculations, management, and performance measurementsProducing critical item lists and reliability maintenance plansSupporting testing and analysis needed to generate MTBF resultsSupporting Failure Reporting and Corrective Action System processesDeveloping all program Reliability & Maintainability CDRLsAdvising Engineering on all aspects of reliability and maintainability engineeringCommunicating status of the reliability and maintainability engineering program to the customerMust-haves:Bachelor's of Sciencedegree in System Engineering or relateddiscipline and typically 14 or more years of relevant experienceDemonstrated knowledge of engineering principles and practices Progressive experience working in multi-disciplinary designand development teamsAdvanced understanding of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principlesAdvanced analytical skillsExtensive knowledge of Reliability Availability Maintainability (RAM) processesExperience independently executing functional responsibilities for small to medium sized programsExperience with creation of Failure Mode and Effects Analysis (FMEA), Fault Tree Analysis (FTA), Root Cause Analysis (RCA) and maintainability analyses (MTBF, MTTR, etc.)Experience with qualitative and/or quantitative reliability and maintainability analysesPreferred:Ability to independently execute functional responsibilities for large programsUnderstanding of Military Specifications and StandardsBackground in the Aerospace and Defense IndustryExperience improving reliability and maintainability through design changes, fault detection, usage restrictions, and trainingExperience with Failure Review Boards (FRBs) and Failure Reporting, Analysis, and Corrective Action Systems (FRACAS)Experience writing analyses to meet regulation- or customer-driven requirementsExperience tailoring analyses or requirements to fit size, complexity, schedule, and budget of programEstimated Starting Salary 144,936.50 - 199,287.69 USD Annually#Ll-hybridSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!As an Equal Opportunity Employer, we welcome our employees to bring their whole selves to their work. SNC is committed to fostering an inclusive, accepting, and diverse environment free of discrimination. Employment decisions are made without regarding to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or other characteristics protected by law. Contributions to SNC come in many shapes and styles, and we believe diversity in our workforce fosters new and greater ways to dream, innovate, and inspire.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mason- Mason, OH,United States (US) Employment Status: Salary Full-Time Function: Engineering Pay Range: ($72,325.00- $108,487.00) Target Bonus: % Req ID:24787 Position overview: As a Quality Engineer, you will be responsible for working with all departments, suppliers, and customers to achieve a Total Quality culture throughout the organization. You will collect and analyze processes, and supplier and customer data by using the Six Sigma process and recommend corrective actions. The Quality Engineer will visit suppliers and customers to validate and promote HPG quality initiatives and ensure quality processes are communicated and followed by all entities. Provides Quality engineering leadership and support in the manufacturing environmentAnalyze process data and recommend engineering changes to improve qualityPerform audits and inspections to ensure compliance with all regulatory agencies and customer requirementsSupports daily issues; protect flow and respond to daily customer demandDesign, install, and evaluate quality control systems, procedures, and statistical techniques that are critical to qualityFormulate or help formulate quality policies and proceduresProvides Quality engineering services to moderately complex and specialized projects which lead to new or improved systems, constructions, materials or manufacturing processes in accordance with sound engineering principles, policies and controlsEnsures all processes conform to specifications (ISO 9001, 14001 & 17025, External Specifications, etc.)Develop and maintain product process control documentationPerformance data gathering & analysis, inspection/quality planningDesign tests / gauges to validate process and product specificationsLead cross-functional teams to facilitate new product introductions, process and procedural changes using DMAIC and Kaizen to identify and eliminate root cause of process issuesAnalyzes and resolved customer complaints. Develops and implements solutions for existing products and processes through collaboration with other engineering, operations and technical personnelCompletes customer or supplier PPAP testing and documentation.Analyzes product and performance data issues timely, writes report and recommends corrective actions Qualified candidates must be goal-driven sales professionals who possess: Bachelor's degree in Engineering, Metallurgy, or other related disciplines3 + years of quality experience in a manufacturing environmentExperience in Quality tools and Six Sigma statistical analysis, ISO 9001 or TS-16949 & 14001 a plusAuditor certification to ISO 9001 or TS-16949 a plusExcellent computer skills; effective written and verbal communicationSAP and Minitab knowledge a plusIntroducing and implementing Lean tool use, selection and applications in a manufacturing environment (Lean Sigma Certification and experience a plus)APQP and AIAG Core Tools a plusSome overnight travel may be required Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Ahealthcare facilityinCincinnati, Ohio is in need of a Medical Physicist to join its Radiation Oncology team and provide physics consultation to all Radiation Oncology personnel concerning aspects of patient care and treatment.Senior Medical Physicist Board Certified with Gamma Knife is required. RequirementsMasters in Medical PhysicsABR Boarded10years of experienceStrong presentation skills, ability to communicate effectively to a group via phone/face to faceStrong technical aptitudeStrong analytical, math, physics skills, including data collection, problem-solvingThe ability to resolve complex technical issues independentlySelf-motivated, organizedDetail-orientedPossess strong time management skillsEstimated PayThe facility provides a competitive range of compensation for this position. Actual compensation is influenced by a wide array of factors including, but not limited to, skill set, level of experience and specific office location.The Pay Range for this position is$235,000.00 to 250,000.00 annualized. It is possible that this position can be hired outside of this salary range based on experience.Benefits of Working with Epic OncologyStaffingHealthcare Coverage: Comprehensive medical, dental, and vision plans.Professional Development: Training, workshops, and education opportunities.Paid Time Off: vacation, sick leave, and personal days.Retirement Plans: 401(k) or 403(b) options and financial planning assistance.Career Advancement: Paths for growth, mentorship, and skill development.Employee Recognition: Awards, events, and appreciation programs.About Epic Oncology StaffingWith more than 20 years of experience in improving the efficiency of oncology departments, Epic Oncology Staffing has become a prominent name in Radiation Oncology Services across the nation. We have successfully placed over 10,000 healthcare professionals, which is a testament to our expertise. Our unique partnership approach enables our placement experts to gain a deep understanding of our candidates' career goals and objectives, allowing us to identify the ideal opportunities for them. If you are interested in this job opportunity, please apply now or contact us for more information.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.SUMMARYTo be a technical focal point for the work cell to work on supplier quality issues directly with the Supplier Quality Engineering group and communicate status on non-conforming parts/suppliers across the work cell product at the site level.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.Ensure that all non-conforming materials held in Receiving Inspection are released to stock or production floor in a timely manner. Provide feed back of issues encountered to SQE II.Provide guidance to Receiving Inspectors.To provide documentation to perform Inspection of components per Inspection Plans in SAP.To be the focal person for work cell related quality and functional product issues that stem from components being purchased for manufacturing.Evaluate component failure rates from production line, collect samples and initiate Failure analysis to drive continuous improvement activity to component manufacturer.Assure that non-conforming materials to be returned to vendor due to poor quality have the appropriate documentation that describes the reasons for return (5W, 2H).Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.Comply and follow all procedures within the company security policy.MINIMUM REQUIREMENTSBachelor's degree required, bachelor’s degree in engineering preferred; and 0 to 2 years of experience.LANGUAGE SKILLSAdvanced PC skills, including training and knowledge of Jabil’s software packages. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management, public groups, and/or boards of directors.MATHEMATICAL SKILLSAbility to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry Ability to work with mathematical concepts such as probability and statistical inference. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.REASONING ABILITYAbility to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individual may be required to sit, stand walk regularly, and occasionally lift up to15 lbs. Be accessible to production floor and office staff and to use required office equipment. Specific vision requirements include reading of written documents and use of computer monitor screen frequently.WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in the work environment ranges from low to moderate.BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.

Please review the job details below.Maxar Technologies is seeking a TS/SCI Cleared System Engineer to work in an agile and fast paced development environment supporting analysts whose mission is to solve unique and challenging intelligence problems for National interests.You will be part of a multi-disciplinary team and have the unique opportunity to interact directly with software developers and other technologists to ensure applications and tools meet the needs of the customer. The ideal candidate is creative and driven, passionate about technology, and able to learn quickly. You will work with a team of forward-thinking system/software engineers to build novel solutions for challenging problems for both US Government and industry customers centered on the development of platforms, applications and systems focused on space object, missile tracking and developing interfaces and data translations between disparate systems. The focus of this position will be to contribute to the development of all aspects of the platform architecture, system and full-lifecycle software development conducted in an agile environment.Your Career:We’re very serious about professional development and continuing education at Maxar. We offer our team members with the opportunity to define their own career trajectories. Our group has amazing resources to support learning and development. You will work with your supervisor, or a mentor, to set goals and design a development plan to advance your career.What We Offer:Time for dedicated professional development, conference attendance, corporate partner and industry training, peer group collaboration, hackathons, as well as paid certifications, education reimbursement and student loan forgiveness.What you'll do day-to-day (with your colleagues):Designing and developing platform tools for data analysis.Presenting your results to current customers and integrating with their teams.Integrating and developing applications for future object detection, identification, tracking and characterization.Maintaining and enhancing existing custom applications.Support migration activities into cloud environments.Modernizing workflows and interfaces, customizing to include new mission areas and topics.Providing exceptional customer support for our clients.Gather and decompose mission requirements into program technical requirements and tie them to program milestones in concert with mission stakeholders.Participate in technical solutioning, architecture design, and integration working sessions to understand system design goals and constraints.Ensures that program technical resource needs are defined and met by working with the functional capability teams to identify and secure appropriate expertise & resources.Evaluates the integration of the engineering solution within the overall engineering environment; ensures that appropriate documentation, testing, maintenance, and engineering updates are completed in accordance with Systems Engineering best practices.Executes program plans to conform to cost, schedule, production, and performance commitments and communicated by the PM and Technical Director.Coordinate with test and evaluation teams to align on appropriate level of end-to-end testing and customer-facing testing.Identify sequencing and dependencies on/with other major initiatives/programs within the program.Supports development of interface control documents, software requirement specifications, performance specifications, presentations and review test plans/procedures.Keeps comprehensive notes/records, provides formal documentation following established processes and makes technical presentations, as required.Lead validation of end-to-end solution for mission value and operations transition.Support the Agile process used to facilitate system baseline changes, taking ownership of those deliverables expected from the customer organization.Ensure quality by managing system and component-level requirements providing traceability to design documentation, test cases, and operational training material.Develop as-built design documents for software & hardware components.Create system-level functional flows with an ability to frame all requirements inside those flows.Lead development of as-built models and design documents for components to ensure all documentation is current.Make contributions to the enterprise vision, engineering processes, and overall architecture roadmap.Participate in design sessions with the broader team from back-end processing to user interfaces.Minimum requirements:Must be a US citizen with a current TS/SCI clearance.Bachelor’s degree in Systems Engineering or closely related field.Minimum of 8 years of experience.Experience developing software using a variety of languages.Experience with software engineering tools (i.e., OpenShift, Rancher Kubernetes Engine (RKE), kubeadm, Elastic Kubernetes Service (EKS) minishift, minikube, kind used for local development and testing.Familiarity with the Agile development process and tools.Experience with Red Hat Enterprise Linux 6.7, 6.8, 7; CentOS, Scientific Linux.Experience with Ubuntu and Debian.Experience shell scripting using Bourne, Korn, C-Shell, and Bash shells.Strong problem solving and thinking skills are required to quickly update existing models and scenarios to reflect the unique capabilities and solutions being considered.#cjpost#LI-CJ1Our salary ranges are market-driven and set to allow for flexibility. Individual pay will be competitive based on a candidate’s unique set of knowledge, skills, and geographic diversity, with earnings potential commensurate with experience. The range for this position is:Maxar employees must follow all applicable Maxar policies and COVID-19 requirements as well as those of Maxar customers and third parties. Individual job requirements may vary, and Maxar reserves the right to modify its policies and requirements as it deems appropriate in accordance with applicable law.Maxar Technologies values diversity in the workplace and is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Description Do you want to join a high performing team that values integrity, innovation, and collaboration with a company whose mission is to make the world safer, healthier, and more efficient through information technology, engineering, and science Are you interested in making a difference by applying your signature production skills toward state-of-the-art research and development problems Leidos currently has an exciting opening for a signatures modeling engineer to work in our Beavercreek, Ohio office.As a Signatures Modeling Engineer, you will apply your skills and critical thinking to a wide variety of signature modeling programs supporting AFRL, NASIC, LCMC, and other customer agencies. You will run state of the art signature prediction codes, like Xpatch and SENTRi on airborne and ground-based vehicle models to generate highly accurate signature models. You will also create custom signature prediction tools and perform special analyses in support of critical customer mission areas. This job offers a unique ability to collaborate directly with the creators of industry standard tools such as Xpatch as well as others (SENTRi, etc.). We are looking for a qualified candidate to bring technical excellence, leadership, entrepreneurship, and creativity to our programs. You will interact with customers, participate in, and lead technical projects areas, and pursue growth in new areas. This position requires most job duties to be performed onsite due to the sensitive nature of this work and the desire for in-person collaboration, however we offer flexible in-office hours and the ability to perform some job duties remotely.Primary ResponsibilitiesModel and characterize electromagnetic (EM) phenomenology (scattering, absorption, polarization, refraction, diffraction, etc.) primarily in, but not limited to, radio frequency (RF) bandsCharacterize and evaluate radar cross sections (RCS)Verify and validate measured data and computational electromagnetic (CEM) predictionsCreate signature predictions using CEM prediction software (SENTRi, Xpatch, COMSOL, CST, HFSS, Feko, etc.)Write and present technical information related to development activitiesAssist or lead the team with business development activities by supporting proposal and technical solution development and also in interfacing with other parts of Leidos for multi-disciplinary capture opportunitiesApply technical leadership abilities and lead or assist teams to develop solutions for complex technical issuesBasic Qualifications:Bachelor’s degree with 12+ years’ experience or a master’s degree or higher with 10+ years’ experience in Electrical Engineering or a closely related scientific field such as Physics, Optics, Engineering Physics, etc.US citizenMust have an active Secret clearance with the ability to obtain a TS/SCI clearanceStrong understanding of applied electromagnetics with skills in EM modeling and experimentationAdept in CEM prediction software and proven history of applying simulation tools to characterize EM phenomenologyExcellent communication skills and a willingness and interest to collaborate in an interdisciplinary team environment to drive towards overall project and team objectivesExpert in technical writing, documentation, and organizationAbility to both lead and work as a team memberStrong attention to detail and deadlinesAbility to lead small technical teams to solve complex problemsA self-starter with a strong drive to lead and develop solutions that meet customer demands in a timely mannerPreferred Qualifications:PhDActive TOP SECRET is desired, but not requiredRadar Cross Section (RCS) design familiarityKnowledge of antenna and radome design principlesCAD and meshing familiaritySupervisory experienceInterest in Business DevelopmentEntrepreneurial interest in working across multi-disciplinary teams on larger, more complex undertakingsA basic understanding of, or exposure to the following is a plus, but not required:Automatic Target RecognitionRadar signal processing fundamentalsMATLAB, Python, and C++ Experience with running simulations on high-performance computing (HPC), graphics processor units (GPU), and other advanced processing platformsLInCElectronic WarfareOriginal Posting Date:2024-05-21While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $122,200.00 - $220,900.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Come to work and be ready to think on your feet, grow your skills, and embrace the many opportunities. Our Distribution Centers are the key to getting new products out to TJ Maxx, Marshalls, HomeGoods, Sierra, Winners, Homesense, and TK Maxx. To keep up with our ever-changing inventory, we stay nimble and adaptable. No day is the same, and that’s just how we like it. Every shift is a new opportunity to Discover Different - and support each other along the way.The primary purpose of this position is to lead all engineering activities and establish a mentality of process improvement within our distribution center. The Industrial Engineering Manager will work with the IE group, Facilities, and the Operations teams to improve process efficiency, maintain labor standards, and reduce costs. Their expertise will also be used to develop and implement regional and national projects and strategies across all of our divisions!DutiesandResponsibilities:Analyze and provide solutions for cost reduction through process improvements and cost/benefit analysis.Design and recommend department layouts and product flows.Identify operational bottlenecks and develop, analyze, and present cost-efficient solutions.Identify capacity impacts to distribution centers associated with varying parameters within the supply chain.Develop preferred methods/Standard Operating Procedures (SOPs) for the warehouse in conjunction with Operational support.Establish and maintain standards using MOST and full cycle frequency studies across all operational processes. Utilizes labor data to cost rationalize capital expenditure and process change return on investment. Uses labor and material cost data to compare and recommend process change and communicate accurate process costs to senior management.Conduct ergonomic evaluations, recommending and implementing improvements to work area designs.Has the ability to take ideas from concept to implementation and can influence decision-making with all stake-holders. Possesses outstanding multi-tasking ability to meet concurrent project timelines.Qualifications:Five or more years of related Industrial Engineering experience and prior exposure managing a team, completing multi-variable work measurements and developing labor standards, process improvement initiatives, and network optimization projects within a distribution center environment.Previous experience with Distribution planning models (square footage, labor, staffing, etc.) and awareness of material handling technology applications is helpfulMS Office Suite with strong MS Excel skills, MS Access, and Visio.Experience with best-in-class Labor Reporting Systems, MOST and Standards Pro. Experience with Red Prairie, Manhattan or equivalent LMSExcellent interpersonal skills, professional, and empathic.Benefits include Associate discount; 401(k) match; medical/dental/vision; HSA; health care FSA; life insurance; short/long-term disability; paid holidays/vacation /sick/bereavement/parental leave; EAP; incentive programs for management; auto/home insurance discounts; tuition reimbursement; scholarship program; adoption/surrogacy assistance; smoking cessation; child care/cell phone discounts; pet/legal insurance; credit union; referral bonuses. All benefits are subject to applicable plan or program terms (including eligibility terms) and may change from time to time. Contact your TJX representative for more information.This position has a starting salary range of $99,600 to $129,600 per year.Actual starting pay is determined by a number of factors, including relevant skills, qualifications, and experience.This position is eligible for an annual incentive.What'sInItForYou At TJX, you'll not only enjoy working for an industry leader, but we also strive to provide a competitive salary and benefits package for our associates!TJX considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status, or based on any individual's status in any group or class protected by applicable federal, state, or local law. TJX also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.Come Discover Different at TJX - we think you’ll find that it’s so much more than a job. We move a lot of inventory - at all times of the day - and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.As you think about where to work, know that we take care of our people. We offer competitive pay and great benefits. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.We are seeking an Electrical Engineer III with a Bachelor's degree in Electrical Engineering or related Engineering field. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and create the most groundbreaking aerospace and defense technologies - those that exist today and those that will shape tomorrow. What to look forward to: Are you ready to unleash your technical creativity Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination! Electrical Engineers at Sierra Nevada Corporation research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital circuits to fully integrated systems.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. https://www.sncorp.com/company/business-areas/Must-haves: Bachelors of Science degree in Electrical Engineering or other related discipline and typically 6 years of relevant experienceKnowledge of engineering principles and practicesExperience with Computer Aided Engineering toolsUnderstanding of electrical systems design and hardware integrationExperience working in multi-disciplinary design and development teamsPreferred: Background in the Aerospace and Defense IndustryExperience with extensive ground and flight test programsExperience with 14 CFR Part 25 testingExperience with Military Systems testingFamiliar with Ethernet, 1553, ARINC 429, and CAN bus protocol At Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE: To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!As an Equal Opportunity Employer, we welcome our employees to bring their whole selves to their work. SNC is committed to fostering an inclusive, accepting, and diverse environment free of discrimination. Employment decisions are made without regarding to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or other characteristics protected by law. Contributions to SNC come in many shapes and styles, and we believe diversity in our workforce fosters new and greater ways to dream, innovate, and inspire.

Ahealthcare facilityinLouisville, Kentucky, is in need of a Medical Physicist to join its Radiation Oncology team and provide physics consultation to all Radiation Oncology personnel concerning aspects of patient care and treatment.Senior Medical Physicist must be Board Certified with experience working on Varian TrueBeam.RequirementsMastersin Medical PhysicsABR boarded10years of experienceStrong presentation skills, ability to communicate effectively to a group via phone/face to faceStrong technical aptitudeStrong analytical, math, physics skills, including data collection, problem-solvingThe ability to resolve complex technical issues independentlySelf-motivated, organizedDetail-orientedPossess strong time management skillsEstimated PayThe facility provides a competitive range of compensation for this position. Actual compensation is influenced by a wide array of factors including, but not limited to, skill set, level of experience and specific office location.The Pay Range for this position is$225,000.00 to 250,000.00 It is possible that this position can be hired outside of this salary range based on experience.Benefits of Working with Epic OncologyStaffingHealthcare Coverage: Comprehensive medical, dental, and vision plans.Professional Development: Training, workshops, and education opportunities.Paid Time Off: vacation, sick leave, and personal days.Retirement Plans: 401(k) or 403(b) options and financial planning assistance.Career Advancement: Paths for growth, mentorship, and skill development.Employee Recognition: Awards, events, and appreciation programs.About Epic Oncology StaffingWith more than 20 years of experience in improving the efficiency of oncology departments, Epic Oncology Staffing has become a prominent name in Radiation Oncology Services across the nation. We have successfully placed over 10,000 healthcare professionals, which is a testament to our expertise. Our unique partnership approach enables our placement experts to gain a deep understanding of our candidates' career goals and objectives, allowing us to identify the ideal opportunities for them. If you are interested in this job opportunity, please apply now or contact us for more information.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.JOB SUMMARYIndustrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.ESSENTIAL DUTIES AND RESPONSIBILITIES· Monitor and continuously improve daily quality/efficiency performance for assigned areas.· Design and procure production tooling, processing equipment and workstations.· Coordinate layout and workstation move activities.· Prepares time estimates for proposed projects and evaluates time factors.· Minimize change over time by ensuring programs use common set-ups where possible.· Verify that machine maintenance is being performed on schedule.· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Key Requirements:o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)o Understanding of Jabil’s global strategies and directiono Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and directiono Strong analytical abilityo Able to implement continuous improvements and cost reduction programso Good communication skills· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

Description Do you want to join a high performing team that values integrity, innovation, and collaboration with a company whose mission is to make the world safer, healthier, and more efficient through information technology, engineering, and science Are you interested in making a difference by applying your signature production skills toward state-of-the-art research and development problems Leidos currently has an exciting opening for a signatures modeling engineer to work in our Beavercreek, Ohio office.As a Signatures Modeling Engineer, you will apply your skills and critical thinking to a wide variety of signature modeling programs supporting AFRL, NASIC, LCMC, and other customer agencies. You will run state of the art signature prediction codes, like Xpatch and SENTRi on airborne and ground-based vehicle models to generate highly accurate signature models. You will also create custom signature prediction tools and perform special analyses in support of critical customer mission areas. This job offers a unique ability to collaborate directly with the creators of industry standard tools such as Xpatch as well as others (SENTRi, etc.). We are looking for a qualified candidate to bring technical excellence, leadership, entrepreneurship, and creativity to our programs. You will interact with customers, participate in, and lead technical projects areas, and pursue growth in new areas. This position requires most job duties to be performed onsite due to the sensitive nature of this work and the desire for in-person collaboration, however we offer flexible in-office hours and the ability to perform some job duties remotely.Primary ResponsibilitiesWork in small teams to achieve program goalsModel and characterize electromagnetic (EM) phenomenology’s (scattering, absorption, polarization, refraction, diffraction, etc.) primarily in radio frequency (RF) bandsCharacterize and evaluate radar cross sections (RCS)Verify and validate measured data and computational electromagnetic (CEM) predictionsCreate signature predictions using CEM prediction software (SENTRi, Xpatch, COMSOL, CST, HFSS, Feko, etc.)Write and present technical information related to development activitiesBasic QualificationsBachelor’s degree with 4+ years’ experience or a master’s degree or higher with 2+ years’ experience in Electrical Engineering or a closely related scientific field such as Physics, Optics, Engineering Physics, etc.US citizenProficient understanding of applied electromagnetics with skills in EM modeling and experimentation and interest in continuous learningAdept in CEM prediction software and proven history of applying simulation tools to characterize EM phenomenologyGood communication skills and a willingness and interest to collaborate in an interdisciplinary team environment to drive towards overall project and team objectivesDemonstrated abilities in technical writing, documentation, and organizationAbility to work as a team memberSolid attention to detail and deadlinesAbility to obtain and maintain a TS/SCI clearancePreferred QualificationsMaster’s / PhDActive SECRET or higher clearance is desired, but not requiredRadar Cross Section (RCS) design familiarityKnowledge of antenna design principals, array technology, frequency selective surfaces, and/or radome design principlesCAD and meshing familiarityA basic understanding of, or exposure to the following is a plus, but not required:Automatic Target RecognitionRadar signal processing fundamentalsMATLAB, Python, and C++ Experience with running simulations on high-performance computing (HPC), graphics processor units (GPU), and other advanced processing platformsMachine Learning/Artificial IntelligenceLInCElectronic WarfareOriginal Posting Date:2024-01-31While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.We are seeking a Senior Project Engineering Manager with a Bachelor's degree in Mechanical, Electrical, Aerospace or Systems engineering or related field. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and create the most groundbreaking aerospace and defense technologies - those that exist today and those that will shape tomorrow. What to look forward to:Are you looking to use your engineering capabilities, project management and collective skills in your next position We could use your expertise on our team! We are innovators on a mission to unify, explore and inspire. As a Sr Project Engineering Manager, you'll assist in developing and implementing the strategy for multiple integrated plans for product development including coordinating activities throughout the product lifecycle from design concept phase to release. You will monitor the product/program/project from initiation through delivery, interfacing with external customers or field-based employees on technical matters, as needed. You'll also review, manage, proactively challenge, and control status of project programs and budgets, manage schedules and prepare status reports, and guide and lead teams in achieving the goals of the program including issue identification, resolution and contingency planning.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. https://www.sncorp.com/company/business-areas/Here’s what you can expect:Generous paid time off and flex timeFriendly and talented colleaguesExclusive SNC company eventsFree to use fitness center on-siteState-of-the-art coffee houseFull-service Cafeteria with planned breakfast and lunch optionsLeadership and development trainingSNC Mentorship ProgramEducation reimbursementModern Campus setting built with collaboration spaces, spectacular mountain views and natural light throughoutAccess to walking and biking trailsAs Sr Project Engineer Manager, you will utilize your skills and expertise to support the execution of the SAOC program being directly responsible for technical execution, leadership, guidance, and oversight for our Propulsion Integrated Product Team (IPT) including responsibility throughout the product lifecycle from design concept, technical reviews (PDR/CDR), and integration and test activities. These IPT responsibilities will include supplier oversight and ensuring requirements are met with respect to modification of FADEC controlled high-bypass ratio aircraft engines. You will be responsible for overall technical direction within the Propulsion Integrated Product Team working closely with the Program Manager leading the IPT as well as the program Airborne IPT Chief Engineer, your technical leads, and the other Chief Engineers in the program.You will ensure program and company processes are adhered to ensure consistency, quality, and safety across the technical team. You will be responsible for building and maintaining customer technical relationship with key customer representatives and several major suppliers. You will assist in building the team including hiring and managing several direct reports and will oversee and support them in their technical roles and career development. You will work with engineering managers and functional engineering leads to recruit, hire, train, and support the engineering team as they execute program design activities. You will be responsible for supplier(s) including creating SOWs and technical specifications, design reviews, product integration, EVM performance, and qualification test activities.Must-haves:Bachelor's of Science degree in Mechanical, Electrical, Aerospace, Systems Engineer or related technical discipline and typically 12 or more years of technical experienceExperience with FAA Part 25 requirements including DER, UMs, ODA, and MCB coordination and qualification of aircraft components and systemsExperience in the design, modification, and/or testing of aircraft propulsion systemsThorough knowledge and understanding of program management, aviation, aerospace & defense, and/or engineering programsExpert knowledge of engineering principles and practiceExperience leading a multi-disciplinary design team of engineers and designers on aircraft modification programsComprehensiveunderstanding of requirements management, system design, integrationDemonstrated working knowledge of managing the technical performance requirements of multiple programs through all phases from inception to completionProven track-record developing, communicating, and executing to meet technical program performanceAbility to lead through complex situations, delegate tasking, inspire your team, and drive results through innovationStrong communication skills, including the ability to clearly express technical concepts in verbal and written forms; ability to tailor conversations to adapt to technical vs. non-technical audiencesUnderstanding of ITAR, licensing, and compliance requirementsThe ability to obtain and maintain a Top Secret U.S. Security Clearance is requiredPreferred:Earned Value Management experienceExperience with NC3 survivability requirements and design approachesDevelop and improve engineering processes and methodsExperience with ensuring compliance with ISO 9001:2000 Policies and ProcessesAt least 6 years of relevant leadership and/or project engineering management experienceFamiliarity with preparation and development of project estimates, technical proposals, and program cost and schedule managementPast history of leading baseline definition and maturation in a complex development setting, including the use of highly integrated trade studies and analysis of alternativesAbility to read and interpret technical drawings and schematics, parts lists, specifications, instructions, and test proceduresProfessional Certification in Program Management International (PMI) and/or Program Management Professional (PMP)Experience or certification in INCOSE standardAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!As an Equal Opportunity Employer, we welcome our employees to bring their whole selves to their work. SNC is committed to fostering an inclusive, accepting, and diverse environment free of discrimination. Employment decisions are made without regarding to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or other characteristics protected by law. Contributions to SNC come in many shapes and styles, and we believe diversity in our workforce fosters new and greater ways to dream, innovate, and inspire.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.Jabil is seeking an experienced Test Engineering Technician II in Florence, Kentucky.Competitive salary offeredGreat BenefitsOpening for shift 6am-6pm Weekends (Thu/F-SS)ESSENTIAL DUTIES AND RESPONSIBILITIES·Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.·Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.·May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS·Basic knowledge in Linux and network.·Working knowledge of IT and Computer Software is preferred.·Testing of compute racks·Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.·Advanced PC skills, including training and knowledge of Jabil’s software packages.·Ability to write simple correspondence. Read and understand visual aid.·Ability to apply common sense understanding to carry out simple one- or two-step instructions.·Ability to deal with standardized situations with only occasional or no variables.·Ability to read and comprehend simple instructions, short correspondence, and memos.·Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

Description Looking for an opportunity to make an impact Currently, we have an opportunity for an AssociateDistribution Engineerfor electric utility design engineering in our Cincinnati, OHoffice. This position requires the selected candidate to work through a temp agency for 6 months before converting to a Leidos employee.Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT)Professional Engineer License (PE)Project Management Professional (PMP)Technical & Non-Technical Training OpportunitiesLeadership OpportunitiesMentorship & Training OpportunitiesOpportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain: NESC expertiseInterface with local clientsElectrical Power CalculationsInteractions with other disciplines (Substation, Protection & Controls, and Civil Structural)Strategic DevelopmentExpanding a Portfolio of BusinessPartnering with a Variety of Utility Clients NationwideLeidos is a trusted and future-focused solutions provider. Utilities consistently come to Leidos for reliable power expertise, as reflected through our work with more than 50 investor-owned utilities and more than 160 municipals/cooperatives across the country as well as a growing number of local utility providers and private developers. Our project portfolio includes large energy projects for electric utilities, power generation owners, and industrial clients. In addition, Leidos works with an established group of industry-leading construction partners delivering meaningful energy delivery solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, Top 10 Program Management Firms, and Top 20 Power Firms.If this sounds like the kind of environment where you can thrive, keep reading!The successful candidate must have experience in developing the work packages for OH, UG, URD, Make Ready and Street Light projects, using customer GIS and WMS systems such as GE Smallworld, Bentley Expert Designer and Maximo. The candidate will be comfortable in both a field and office setting, and well trained in customer engineering and construction standards. Candidates will gain experience in coordination of conflicting utilities, and other field engineering design requirements, the assessment and development of design big packages for complex cable/conduit projects in dense urban environments, work permit development, easements and ROW applications, and the design of mainline vault medium voltage switchgear, network system design and distribution system protection and coordination.Background must havesBachelor of Science in Engineering degree from an accredited university is required.Candidate must provide their own reliable transportation.Local customer/job related travel is anticipated and will be reimbursed at IRS approved rates.Nice to haves6+ months of prior relevant experience.Experience providing estimated costs, development of a BOM, calculating the CIAC.Experience with design tools such as Pole Foreman, SOCKET, Spida-CalcExperience using Autocad - performing Electrical Distribution design.Experience with design standardsProfessional AttributesStrong communication skills, written and interpersonal communications skillsand supporting of customer advocacyCollaborative and inclusive of individuals of diverse backgrounds and geographic locationsPositive attitudeAbility to work with limited supervision.Professional dress and demeanorLeidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160 municipals/cooperatives, as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power FirmsPowerDeliveryLeidosCollegePDSDLINEOriginal Posting Date:2024-07-03While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $48,100.00 - $86,950.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Do you have an eye for detail and enjoy working with amazing products and tools Join us in championing and protecting explorers and heroes! As a Test Engineer at SNC, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASMust-haves:Bachelor's of Science degree in Engineering or other related discipline and typically14 or more years of experienceThorough understanding and ability to interpretengineering principles and practicesProgressive Experienceworking in multi-disciplinary designand development teamsAdvanced Knowledge of requirements management, system design,and systems integrationDemonstrated experience planning, conducting and documenting Verification and Validation (V&V) activitiesPreferred:Experience with various testing equipment, standards, and methodologies to include manual and automated testingAbility to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirementsFamiliarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformancesExperience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniquesBackground in the Aerospace and Defense IndustryAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!As an Equal Opportunity Employer, we welcome our employees to bring their whole selves to their work. SNC is committed to fostering an inclusive, accepting, and diverse environment free of discrimination. Employment decisions are made without regarding to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or other characteristics protected by law. Contributions to SNC come in many shapes and styles, and we believe diversity in our workforce fosters new and greater ways to dream, innovate, and inspire.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.SUMMARYTo assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.· Ensure capability studies are performed on critical processes.· Perform first article inspection and review visual aids.· Perform defect analysis reporting.· Perform MRB on sustained products.· Participate in CAC meetings – support continuous improvement.· Perform line and product audits.· Assist Quality Engineering in APQP.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.MINIMUM REQUIREMENTSBachelor's degree preferred; or equivalent combination of education and experience.BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.

Description Looking for an opportunity to make an impact Currently, we have an opportunity for an AssociateDistribution Engineerfor electric utility design engineering in our Cincinnati, OHoffice. This position requires the selected candidate to work through a temp agency for 6 months before converting to a Leidos employee.Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT)Professional Engineer License (PE)Project Management Professional (PMP)Technical & Non-Technical Training OpportunitiesLeadership OpportunitiesMentorship & Training OpportunitiesOpportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain: NESC expertiseInterface with local clientsElectrical Power CalculationsInteractions with other disciplines (Substation, Protection & Controls, and Civil Structural)Strategic DevelopmentExpanding a Portfolio of BusinessPartnering with a Variety of Utility Clients NationwideLeidos is a trusted and future-focused solutions provider. Utilities consistently come to Leidos for reliable power expertise, as reflected through our work with more than 50 investor-owned utilities and more than 160 municipals/cooperatives across the country as well as a growing number of local utility providers and private developers. Our project portfolio includes large energy projects for electric utilities, power generation owners, and industrial clients. In addition, Leidos works with an established group of industry-leading construction partners delivering meaningful energy delivery solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, Top 10 Program Management Firms, and Top 20 Power Firms.If this sounds like the kind of environment where you can thrive, keep reading!The successful candidate must have experience in developing the work packages for OH, UG, URD, Make Ready and Street Light projects, using customer GIS and WMS systems such as GE Smallworld, Bentley Expert Designer and Maximo. The candidate will be comfortable in both a field and office setting, and well trained in customer engineering and construction standards. Candidates will gain experience in coordination of conflicting utilities, and other field engineering design requirements, the assessment and development of design big packages for complex cable/conduit projects in dense urban environments, work permit development, easements and ROW applications, and the design of mainline vault medium voltage switchgear, network system design and distribution system protection and coordination.Background must havesBachelor of Science in Engineering degree from an accredited university is required.Candidate must provide their own reliable transportation.Local customer/job related travel is anticipated and will be reimbursed at IRS approved rates.Nice to haves6+ months of prior relevant experience.Experience providing estimated costs, development of a BOM, calculating the CIAC.Experience with design tools such as Pole Foreman, SOCKET, Spida-CalcExperience using Autocad - performing Electrical Distribution design.Experience with design standardsProfessional AttributesStrong communication skills, written and interpersonal communications skillsand supporting of customer advocacyCollaborative and inclusive of individuals of diverse backgrounds and geographic locationsPositive attitudeAbility to work with limited supervision.Professional dress and demeanorLeidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160 municipals/cooperatives, as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power FirmsPowerDeliveryLeidosCollegePDSDLINEOriginal Posting Date:2024-07-03While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $48,100.00 - $86,950.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you a bold thinker We dream big at SNCadvocating the exploration of space, keeping service members safe and creating the systems that keep our world united and sustain our way of living. Join our team! As a Systems Engineer, you will be using your skills and expertise to research, architect, model, simulate, test, certify and improve cutting edge products and services. You'll be developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools. As a cross-functional engineer, you are in charge of system-level ownership of new products and processes through the product lifecycle.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASYou will be leading a Systems Safety team across the complete life cycle of a major aircraft modification program. This includes overseeing both FAA and Military Systems Safety arenas, being the subject matter expert for safety engineering design, and direct interaction and engagement with the customer.Responsibilities:Leading a team and advising Engineering on all aspects of Systems SafetyParticipating in customer meetings at the Senior Leadership levelStatus work activity as a Control Account ManagerCommunicating status of the system safety program to the customerPerforming qualitative and quantitative system safety analyses that fulfill customer requirementsMust-haves:Experience with systems safety processes, both civil and militaryBachelor's degree in Systems Security, Network Engineering, Information Technology, or related Engineering discipline and typically 10 years of relevant experienceExperience independently executing functional responsibilities for small to medium sized programsExperience applying MIL-STD-882E and/or ARP4761 or similar processes, like NASA/SP-2014-612, to the development of systems, hardware or softwareExperience with creation of a Hazard Tracking System (HTS), Functional Hazard Analysis (FHA), Fault Tree Analysis (FTA), Failure Modes and Effects Analysis (FMEA), System or Subsystem Hazard Analysis (SHA/SSHA), Common Cause Analysis (CCA), and the System Safety Assessment (SSA)Experience with qualitative and/or quantitative system safety analysisPreferred Skills:Previous leadership experience: exposure to recruiting employees including assigning, directing and evaluating their work and overseeing the development and maintenance of staff competenceAbility to independently execute functional responsibilities for large programsSoftware development or coding experienceExperience using DO-178 and/or DO-254 for design developmentExperience developing software system safety analysesExperience with agile developmentExperience with Model Based Systems Engineering (MBSE) using Cameo, Matlab / Simulink or similarExperience mitigating safety risk through design changes, fault detection, usage restrictions, and trainingExperience in aircraft systems developmentExperience writing analyses to meet regulation- or customer-driven requirementsExperience tailoring analyses or requirements to fit size, complexity, schedule, and budget of programAssociate Safety Professional (ASP) / Certified Safety Professional (CSP) certificate• Received certified System Safety training from APT Research, USC, or similarAt SNC we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!As an Equal Opportunity Employer, we welcome our employees to bring their whole selves to their work. SNC is committed to fostering an inclusive, accepting, and diverse environment free of discrimination. Employment decisions are made without regarding to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or other characteristics protected by law. Contributions to SNC come in many shapes and styles, and we believe diversity in our workforce fosters new and greater ways to dream, innovate, and inspire.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.SUMMARY Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.· Review circuit board designs for testability requirements.· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.· Generate reports and analysis of test data, prepares documentation and recommendations.· Review test equipment designs, data and RMA issues with customers regularly.· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.· Determine conditions under which tests are to be conducted and sequences and phases of test operations.· Direct and exercise control over operational, functional, and performance phases of tests.· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.· Develop or use computer software and hardware to conduct tests on machinery and equipment.· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.· May provide training in new procedures to production testing staff.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.MINIMUM REQUIREMENTSBachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.LANGUAGE SKILLSAbility to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.MATHEMATICAL SKILLSAbility to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.REASONING ABILITYAbility to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Do you have an eye for detail and enjoy working with amazing products and tools Join us in championing and protecting explorers and heroes! As a Test Engineer at SNC, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASMust Have: Bachelor's of Science degree in Engineering or other related discipline and typically 2 or more years of experienceConceptualknowledge of engineering principles and practicesFamiliarityworking in multi-disciplinary designand development teamsKnowledge of requirements management, system design,and systems integrationExposure to planning, conducting and documenting Verification and Validation (V&V) activitiesPreferred:Experience with various testing equipment, standards, and methodologies to include manual and automated testingAbility to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirementsFamiliarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformancesExperience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniquesBackground in the Aerospace and Defense IndustryAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE: To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!As an Equal Opportunity Employer, we welcome our employees to bring their whole selves to their work. SNC is committed to fostering an inclusive, accepting, and diverse environment free of discrimination. Employment decisions are made without regarding to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or other characteristics protected by law. Contributions to SNC come in many shapes and styles, and we believe diversity in our workforce fosters new and greater ways to dream, innovate, and inspire.