We are looking for Flaggers to join our team!
Unload and load supplies and equipment for company and vendor trucks, perform flagging out on roads and railroad crossings, keep shop and yard organized, assist with pickups and deliveries.
Job Duties: Lifts, carries, loads and unloads various construction items including line painting supplies, signs, tools, steel, aluminum, wood and hardware, etc. Prepares, cleans and sweeps work areas and maintain a neat, orderly, work environment. Make sure trucks are loaded with proper equipment for set tasks. Works out in the field performing flagging duties for traffic control. Organizing inventory and shelves Ensure yard is organized and kept clean. Assist with product inventory Ensure all safety rules and procedures are adhered to at all times. Perform other work related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer Don’t have a Highschool diploma, no problem! RoadSafe will pay for you to get your Highschool Diploma too! $125 Red Wing Boot Voucher! Nationwide Company = Nationwide Growth Potential for YOU! Opportunity to grow in a new industry! Ask about our unlimited bonus through our Employee Referral Program!
Requirements: Drivers License - Required - Let the Recruiter know if you have a CDL license and you may be eligble for a different role as well. Must be able to speak and read English. Ability to understand and follow directions as given Ability to lift and carry up to 50 pounds. Must be able to pass a background check, drug test. Ability to work flexible hours.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Equipment Service Technician - VQDLocation:Marysville, OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technician responsible for maintaining of equipment. This includes responding to equipment emergency downtime, troubleshooting for root cause and repair as needed.Responsibilities include:Ability to troubleshoot and repair: Robots, Servo Systems, Electrical Systems, Automated Machinery and Mechanical SystemsInterpret electrical, mechanical, and hydraulic prints.Complete assigned work orders and support production members in achieving the lines run rate efficiency.Document daily (all) activity and information in Equipment Management Systems (Maximo)Support weekend preventative maintenance, repair, and plant shutdown activities as well as new equipment installations and equipment modificationsWho we are seeking:Required Work Experience:Preferred 3 months of relevant experience.Required Education:High School Diploma or Equivalent. Two-year degree (Electrical/Mechanical/Industrial) or equivalent equipment maintenance experienceDesired skills:Problem analysis skills, Robots, Servo Systems, Electrical Systems, Automated Machinery and Mechanical Systems, knowledge of Microsoft Office (Excel, Power Point, Word). Time managementAdditional Position Factors:Department Equipment Run TimeDepartment Delivery Run RateEfficiency AchievementPreventative Maintenance On-time CompletionOther Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation1.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Schneider Electric has an opportunity for a HVAC Building Automation Technician in either West Chester, Columbus or Dayton, OH areas.Schneider Electriccreates connected technologies that reshape industries, transform cities and enrich lives. Our 135,000+employees thrive in more than 100 countries. From the simplest of switches to complex operational systems, our technology, software and services improve the way our customers manage and automate their operations. Help us deliver solutions that ensure Life Is On everywhere, for everyone and at every moment.http://www.youtube.com/watch v=YtExntUe89cGreat people make Schneider Electric a great company.What do you get to do in this position Services and maintains complex HVAC Building Automation SystemsDiagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Electrical troubleshooting knowledgeProvides sketches of field changes and discrepancies for engineering corrections and drawingsCommunicates with customer upon arrival and before leaving the work site.Meets regularly with customer to become familiar with operating problems.Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement.Acts as a technical resource to team and customer as needed.Provides start-up and checkout documentation to the installation team for use in commissioning and validationWorking knowledge of MS Office, File Structure, VISIO.Knowledge of basic BACNET/LON/MODBUS protocols. Must be highly organized and possess the ability to work in a high paced environment with the ability to prioritize tasks to meet the schedules given by the leadershipDemonstrate the ability to operate independently and autonomously and take ownership of all tasks. Excellent oral and written communication skills and team orientedQualifications:3+ years of field experience in the HVAC controls industry; preferably with troubleshooting, maintenance, and service Technical, hands-on experience with commissioning and programming of DDC controls. Knowledge of HVAC systems and equipment. The ability to communicate technical material to a nontechnical audience Proficiency with writing code for controller sequence of operations Proficiency with integration protocols (BACnet, Lon works, Modbus, etc.) .Requirements:Two-year (2) degree in a related technical field required or related work experienceExperience in HVAC building Automation a must!Proficiency with Microsoft Office products (Word, Excel, PowerPoint, Visio) and general windows environment Excellent customer service skillsExcellent verbal and written skillsCustomer-focused, results-oriented professional, and strong team player. Self-starter that demonstrates initiative. Ability to manage multiple priorities and stay organized.#L1-KJ1 Schneider Electric offers a robust benefits package to support our employees such as flexible work arrangements, paid family leave, 401(k)+ match, and more. Click here to find out more about working with us: http://se.com/us/careers. We seek out and reward people for putting the customer first, being disruptive to the status quo, embracing different perspectives, continuously learning, and acting like owners. We’re recognized around the world for welcoming people as they are. We create an inclusive culture where all forms of diversity are seen as a real value for the company. See what our people have to say about working for Schneider Electric. Why us Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive.25.7bn global revenue137 000+ employees in 100+ countries45% of revenue from IoT5% of revenue devoted for R&DYou must submit an online application to be considered for any position with us. This position will be posted until filledIt is the policy of Schneider Electricto provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.

Put the wheels back in motion. Be a Wizard.As a Wheel Technician with Dent Wizard, you’ll use the latest tools and techniques to restore wheels and wheel covers – and we’ll reward you with uncapped earning potential. We’re hiring now in Columbus, OH.for a hard-working individual with the skills and outgoing personality to keep things rolling.Working on site at customer locations, you’ll fix cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels) using spray-painting equipment, power tools and work aids. The process involves removing the wheels, repairingthem in your mobile truck and placing them back on the vehicle.Tasks include painting surfaces, inspecting wheels, prepping and buffing defects, mixing colors and finishing.The Dent Wizard DifferenceUnlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision,401(k), paid vacation and moreOutstanding perks, including tools and supplies, company truck, gas card and moreEnvironmentally friendly trucks with explosion-proof filtration and fixtures, outfitted with premixed and pre-matched OEM wheel colorsIndependence to manage your day; no micromanagement Fun and dynamic team where everyone is supportive and has your backVariety of work on many types of cars, both new and old modelsThree weeks of trainingat one of our facilities with Master Wheel Techs to help you learn advanced techniques We pay for the training, pay you a salary while you train and provide travel and lodgingDevelop your technical and customer service skillsonce you are on the job, with assistance from experienced Techs Advancement potential into higher Tech levels (with more $) or management rolesWhat You Need to SucceedAuto painting experience or collision repair technical school training preferred but not requiredVision abilities including close, distance and color vision, depth perception and ability to adjust focusToughness and grit to work outside in all kinds of weatherStrong organizational and communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyPhysical stamina to kneel, bend, squat and climb, as well as lift up to 45 poundsValid driver’s license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location.This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between$50,000 and $65,000 annually.We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent WizardDent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Shift - Tuesday to Friday, 10-hour shift, nights, OT as neededWhat this job involves – The HVAC Mechanic will perform HVAC and mechanical preventive maintenance and repairs primarily on controlled temperature units. This will include hands-on work to complete the necessary work within Jones Lang LaSalle standards and guidelines.What is your day to day Performs troubleshooting, service, and maintenance on Controlled Temperature Units (CTU), HVAC systems including but not limited to controls, air handlers, BMS, BAS, actuators, pumps, valves, dampers, and motors.Operate and maintain the following systems: heating hot water & steam, ventilation equip., air conditioning, water conditioning – treatment and refrigeration skids for cool rooms.Operate & maintain ancillary systems such as cooling towers, pumps, chillers, etc.Install trouble-shoot maintain & repair air conditioning and refrigeration equipment related piping within the unit and controls. Experience in pneumatic and DDC controls, wiring methods, and instrumentation is requiredWork from CAD drawings, prints, schematics, sketches, or verbal instructionsAdapt and install specialized cooling and or heating devices for specific requirements.Experience with water treatment methods, and procedures for cooling and hot water circulation systems including testing of basic parameter, troubleshooting system problems, and repairing of equipment as needed.Performs installation and replacement of relevant HVAC system components.Performs work on a variety of non-HVAC building systems including FLS, doors, plumbing, and electrical as needed.Maintains good tenant relations through prompt and courteous response to tenant requests within the guidelines set forth by JLL.Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required.Contributes and own areas of refrigeration management.Perform work outside of the trade to include other duties as assigned by management including but not limited to painting, light bulb replacement, installation of pipe, plumbing and other maintenance related tasks.Required:Electronic and pneumatic controls and diagrams.1+ years of experience working as a refrigeration & air conditioning mechanic in an industrial or research environment.1+ years experienced in refrigeration and HVAC practices.Preferred:Experience working in a GMP environment2-3 years’ validated CMMS experienceEPA 608 UniversalKnowledge of BAS (Building Automation System) or QBAS (Qualified Building Automation System)Work Environment:Working inside of automated manufacturing distribution center#HVACjobs

$23.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) On-the-job training to expand your automotive abilities and help to obtain ASE Certificates Paid time off Medical, dental and other insurance Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses Retirement benefits (401k) Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving record At least 2 years of auto repair experience or coursework with automotive certifications 1 ASE certification (ability to acquire 2 additional ASE certifications within first year) Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel Comfortable working in a mechanical shop with moderate or loud noise levels Must have a complete set of tools required for auto repair and maintenance Basic computer skills including typing, data entry Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles Must be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. ColumbusOhioUnited States of America

What we offer:Competitive Starting PayHealth Savings Account (HSA)Tuition ReimbursementPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceLife Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Fire Suppression systems and product lines as well as similar competitive manufacturers’ product lines.How you will do it:Work with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredFire alarm license and able to obtain and retain any licenses that are required by National, State and Local codes.3 years' experience for this role documented service experience in fire alarm or fire sprinkler.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.PreferredNICET certification Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesUnion benefitsMatching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Must be able to work a 10:30pm-7am shift Education Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $26.75 / hour #CAZL ExperienceRequiredAble to work a 3rd shift ( 10:30pm- 7am )1 year(s): Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.1 year(s): Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

MAINTENANCE TECHNICIAN: ASHLAND, OH (PLANT) 929 Faultless Dr, Ashland, OH 44805, USAReq #9304 Monday, January 8, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Responsibilities:Troubleshoot and maintain highly technical and automated equipment, which includes process systems, high pressure boilers, air compressors and other building utilitiesPay & Benefit:Pay range $26.76 – $37.80Quarterly and annual perfect attendance bonus up to 1,600.00total per yearAnnual bonus opportunityExcellent benefits package (Health, Dental, Vision)Company-paid life insurance401kplanwith company match1.5 pay over 8 hours, over 40 hours and weekends1.5 pay on holidays plus additional overtime over 8 hours on holidaysUp to 1 week of vacation within the first year after 90-day probation periodUp to 11 paid holidays after probation periodUniforms ProvidedBasic Qualifications:2-5 years’ experience in successfully troubleshooting and repairing industrial machinery.On the job success in safety, attendance, and quality of work expected.Strong electrical background in Industrial Electrical Controls (Frequency drives, PLC’s, Servo’s).Siemens S5, S7 controls, Allen Bradley PLC knowledge to include SLC 500, PLC 5 and Logix 5000 (troubleshooting), understanding of electrical schematics and documentation, welding to include MIG and ARC, familiar with Conveyors, Pumps, and gearboxes, etc.Strong mechanical aptitude, good decision-making skills, and be self-motivated.Experience with Pneumatic and Hydraulic Systems, 480V 3 phase troubleshooting and wiring, low voltage controls, utilities- boilers, and compressors.Must have a good attitude and able to work in a team environment.Willingness to pursue ongoing technical training to enhance capabilities.Must have own tools.Ability to manage several priorities at once.High School Graduate or GED.Be passionate about maintaining a safe work environment.Ability to pass pre-employment drug test & background check.Must be willing to work all shifts as needed, includingsecond and/or third shift.Ability to work overtime and weekends as needed.Must be authorized to work in the U.S.Preferred Qualifications:Previous plant manufacturing experience, particularly within the corrugated or packaging industry.An associate degree in this field or related field.Knowledge, Skills & Abilities:Must be willing to work closely on a day-to-day basis with other production personnel.Ability to share ideas with others to solve problems of essential importance.Excellent communication skills.Work with a sense of urgency to reduce downtime of machines.Resumes are preferred but not a requirement to be included with the Job Application. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyMin Hiring Rate$26.76Max Hiring Rate$37.80

Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: This position is responsible for the management, training, scheduling and development of maintenance personnel providing support to the Production/Processing areas at the West Jefferson, OH facility. This newly constructed facility will produce protein drinks. PM shift.Assumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks.Supervision of maintenance crew.Production support in the Production / Processing areas.Creates work orders and PMs.Responsible for installing new equipment.Troubleshoots problems with equipment.Provides a safe work environment for employees.Recognizes and takes steps to resolve operating problems in order to minimize their impact on the operations.Cooperates with all departments to assure a coordinated work relationship exists at all times.Keeps accurate and up-to-date records (I.E. timecards, downtime records, absentee records, etc.)Enforces company policies in a fair and consistent manner.Encourages suggestions from employees which will improve production, quality, safety and/or control costs of production.Keeps manager informed on operating and/or employee problems which may require their attention or knowledge.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained.Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Responsible for Food Safety and Food Quality of MFI products.#firstinpeople Qualifications: Associate’s degree (AA) or two-year technical certificate in Mechanics and Electronics or a related field Two years of mechanical and electrical maintenance and supervisory experience; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.PREFERRED EDUCATION, EXPERIENCE AND SKILLS: Knowledge and experience supporting Aseptic filling operations. Tetra Pak experience a plus.Knowledge of basic mechanics, welding, electrical, fabrication, preventative maintenance, plant operations and government safety regulations.Able to supervise department personnel in a fair and consistent manner.Be able to recognize problem situations and take appropriate steps to resolve.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information in one-on-one and in group situations. Ability to respond to questions from internal/external customers/vendors at all levels including management.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables

Legal Entity:Honda Dev. and Mfg. of Am.,LLCBusiness Unit:Frame & Interior Development BUDivision:Interior Cabin Development DivWork Location:Auto Development CenterHiring Manager:Allen CossetteShift:1stCareer Level:4Job Grade:Exempt-3Job PurposeAt the Sr. Engineer I Career Level, you are an expert in related technical areas and expected to oversee assigned development, testing, and / or research activities, while developing others from a technical, project, and / or team management role.Key AccountabilitiesProject/Team Management –Lead small to medium sized team, communicate the deliverables and plan to achieve them. Coordinate team activities on development/research/testing activities, managing the flow of team members on and off the project as needed. Build the capabilities of the team through coaching and mentoring. Provide technical guidance and oversight on requirement achievement, test results, and countermeasure application. Responsible for function output of project(s)Engineering Solution Design & Specification –Initiate and Lead the design of complex assemblies, the associated drawings, engineering specifications/standards and validation processes as required.Conceive and lead the development of engineering specifications and standards or functions to guide engineering and manufacturing work in the organization and its suppliers.Provide direct technical guidance and final oversight to multiple groups and ensure functional safety standards are met.Gather data and provide feedback and judgement on the feasibility, costs, quality and performance of design concept.Understand and consider in decision-making the connections and impact to different vehicle segments and development activities.Correlate with cross-divisional or cross-company counterparts when necessary and align with the organizational technology standards, regulations, and policies.Review and provide judgement on technical results and offer recommendations for development to technical staff, including up to Chief Engineer.Build or bring in new technologies and specifications, managing associated risks and addressing issues.Supplier Management – Identify new, select and lead technical negotiations with suppliers. Support PIC’s in supplier interactions and negotiations. Lead communications, set or support direction setting, build new and manage existing relationships; addressing issues as needed.Documentation – Compile and/or develop documentation to meet program deliverables and move development process forward. Review documents prepared by PIC’s for completeness and quality.Integration & Correlation – Integrate areas of responsibility into the vehicle or lead a group in doing so, providing guidance to resources as needed. Interacting and correlating direction at the cross-department and cross-divisional level. Adapting communication style and approach as needed depending on the audience and purpose.Relationship Management – Manage relationships with internal stakeholders andcounterparts, building professional credibility and trust. Manage inter-company issues andcoordinate internal resources. Provide reports on large project status items and deliverables.Personal Development – Be recognized as a subject matter expert in own area of technologyor department function and beyond in the division. Maintain an in-depth understanding ofcurrent and emerging technologies, regulations and company best practices.Improvement & Innovation – Lead continuous improvement projects and provide relatedtechnical or group management (i.e. in requirement development, process improvement, projectmanagement, associate development, communications). Lead and/or create new technologyinternally or with suppliers. Foresee and recognize potential cascading impacts in thedevelopment process and act to prevent or resolve them in a timely manner.Qualifications, Experience, and SkillsBachelors of Science in Mechanical, Aero, or Automotive Engineering, BS Industrial Design or Equivalent Industry Experience Minimum of six years of experienceSubstantial general work experience together with comprehensive job related experience in own area of expertise to fully competent levelExperience of supervising and directing people and other resources to achieve specific end results within limited timeframesWorkstylePrimary working location is seated at a deskLimited lifting of parts and part dunnage maybe required on occasionLess than 10% travelOT required as necessary to achiever program deliverablesTotal RewardsAt Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda. Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment. We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary: Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc.Annual BonusOvertimeIndustry leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionLifestyle BonusRelocation assistanceCareer Growth:Advancement opportunitiesCareer mobility Education reimbursement for continued learningTraining and Development programsAdditional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Columbus, OH!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

As our Maintenance Mechanic at Mauser Packaging Solutions in Mount Vernon, OH, you keep our line equipment running smoothly so we can deliver quality products to our customers on time. During shifts, your main job is to address any issues on the line as they crop up. You must be quick on your feet to get to the line, troubleshoot the issue, and repair it as quickly as possible, ensuring minimal downtime and complete safety at all times. You will also do preventative maintenance, repairs, and updates that cannot be done while the line is running. To thrive in this role, you must have electrical knowledge and experience, an impeccable safety record, and you must be reliable and show initiative. You show up every day eager to dive in and address issues you see, without being told. You are responsible for keeping the line moving safely and you take a lot of pride in that. Here’s what you can expect on a typical day as a Maintenance Mechanic on our team at Mauser Packaging Solutions: Safety is our number one priority. You’ll learn our plant safety guidelines and pass all required safety training including lockout/tagout, housekeeping, and 5S standards.Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyPerform other related duties as assignedWe take pride in our output and you take pride in ensuring our equipment is running smoothly and safely.High-Speed, Loud Environment. Some areas of the plant get very warm in the summer.Hard work. Each day you’ll be bending, lifting, stooping, and the like to repair equipment. You’ll work with PLC equipment, multiple small tools, and high-voltage equipment. You are responsible for keeping your equipment in safe, usable condition and your area safe and tidy at all times.Supportive Team. Everybody plays an integral part in this work-family as we strive to reach all of our goals and deliver an excellent product.Excellent Pay and Benefits. We offer an excellent benefits package. We know you work hard and we want to take care of you and your family. Job Skills & Qualifications Required: High school diploma or equivalent5+ years of proven work experience in a maintenance within a manufacturing environment; or equivalent combination of training and experienceAble to demonstrate the ability to maintain, troubleshoot and repair electrical equipment and mechanical systems involving electrical, plumbing, pneumatic, and hydraulic repair or replacement, including blown fuses and tripped breakers.Knowledge of PLC Logic, and ability to read schematics and blueprints.Understand electrical panel and drive components.Understand gear trains, shafts/journals, pulleys, and bearings.Good problem-solving skills.Must be able to draw a 3 phase motor control CircuitBasic computer skills including Microsoft OfficePLC experience in a manufacturing settingMust be able to work Nights / Weekends Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Overview:This Repair Service Center Mentorship position is responsible for learning all functions of the repair process including check in, locating, pack out, vendor work order handling, material handling, and training as a Repair Technician. This critical position supports the movement of repair work orders through the facility as quickly and accurately as possible. The position will also assist in picking all parts, part inventory, part cycle count and for making sure our Repair Technicians have all needed material for repairing tools. This position will follow a structured training schedule while apprenticing as a Repair Technician to possibly fill open positions in the future. Attention to detail, working with a sense of urgency, quality work and communication are all critical for individuals in the Repair Service Center Mentorship position.The qualified individual should also possess strong mechanical ability and be able to learn to use test equipment such as a bolt tension meter and RPM meter. This person should also be able read and understand schematics and technical documents pertaining to the repair of air, electric and cordless power tools.Essential Job Functions:• Part picking and put away, inventory cycle count and assists the team on improving our processes for handling all parts and material used in the process of repairing tools• Ability to learn and effectively use computer systems including AYS, AS400, and WMS• Ability to develop a working knowledge of all positions in the repair center including:o Check Ino Pack Out and Locateo Vendor Work Order handlingo Repair Technician• Offer continuous improvement suggestions for our systems, processes and policies• Help identify escalating concerns, patterns or service issues• Ability to work with a high sense of urgency and professionalism; capable of handling stressful situations• Miscellaneous tasks including projects such as 5S and Kaizen, and other duties assigned by the Supervisor or Lead.Required Qualifications:• High school diploma or GED• Excellent verbal and written communication skills• Basic math skills, including proficiency in the use of fractions and percentages• Able to multitask, prioritize workload, and have a high tolerance for stress• Strong attention to detail and high level of quality orientation• Able to adapt and prioritize work to support the flow of work orders through the Repair Service Center• Must have a strong mechanical aptitude, including the ability to read and work with diagrams and schematics• Must meet the minimum qualifying requirements on the Repair Technician Test• Must meet performance standards within assigned tool groupPreferred Qualifications:• Experience with WMS picking operation and processPhysical Requirements**:• *Must be able to always (95% - 100%) lift and maneuver 10 pounds in any range of motion combination from ground/ankle height through above shoulder height for the 8-hour shift.• *Must be able to frequently (65% - 90%) lift and maneuver 15 pounds in any range of motion combination from ground/ankle height through above shoulder height for the 8-hour shift.• *Must be able to often (35% - 60%) lift and maneuver 30 pounds in any range of motion combination from ground/ankle height through above shoulder height for the 8-hour shift.• *Must be able to occasionally (5% - 30%) lift and maneuver 50 pounds in any range of motion combination from ground/ankle height through above shoulder height for the 8-hour shift.• *Must be able to often (35% - 60%) walk and stand for the 8-hour shift.• *Must be able to climb and descend a flight of stairs for a minimum of 15 times per 8-hour shift.Travel Requirements:• On-site critical position. Travel not required.* Denotes essential physical functions of the job.** All lifting and/or maneuvering performed must comply with the proper safety techniques established and communicated by The Stanley Works EH&S program.The above verbiage reflects the general details considered necessary to describe the primary functions of the job, and shall not be construed as an all-inclusive description.Stanley Black & Decker is an Equal Opportunity Employer M/F/D/V.All qualified applicants that apply for Stanley Black & Decker will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We Don't Just Build The World, We Build Innovative Technology Too. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you'll get the unique chance to impact some of the world's most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights. Who We Are We're the World's largest tool company. We're industry visionaries. We're solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art "smart factory" products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company. Benefits & PerksYou'll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You'll Also GetCareer Opportunity: Career paths aren't linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development: Our lifelong learning philosophy means you'll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities). Diverse & Inclusive Culture: We pride ourselves on being an awesome place to work. We respect and embrace differences because that's how the best work gets done. You'll find we like to have fun here, too. Purpose-Driven Company: You'll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices. EEO Statement: All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic. If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password. Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Custodian to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be performing housekeeping and cleaning activities of the facility in office spaces, kitchen areas, common areas, plant / production floor, restroom facilities, and parking lots / grounds areas. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses.What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Utilize equipment to perform housekeeping operations, including wet and dry mops, brooms, floor scrubbers, vacuum cleaners, cleaning supplies, towels, steel wool, carts, and trash cans. Ensure restrooms, kitchen, and breakroom areas are cleaned and stocked. Remove trash and place it in the designated area. Maintain window cleanliness. Uphold furniture by dusting and ensure builders hardware is satisfactory. Relocate light furniture to assigned areas as directed. Replace light bulbs in overhead fixtures when directed. Perform cleaning operations in the office areas, production floor, outside of the facility, and other property areas as assigned by the Maintenance Supervisor. Perform other duties as assigned by leadership QualificationsWhat we're looking for: Must be at least 16 years of age or older Must be 18 years of age or older to work in heights and electricity High school education and/or GED equivalent is preferred. Knowledge of cleaning materials and equipment to ensure safe usage of general cleaning chemicals. Ability to work independently with little or no supervision. Must be able to operate floor cleaning equipment and other tools as required. Ability to read, comprehend and interpret procedures and instructions in English. Ability to effectively present information and respond to questions from co-workers and managers. Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

This role is not open for submissions from outside staffing agencies 2nd Shift Maintenance Technician $1,500 Sign-On Bonus What Brought You Here Total compensation pay range: $28-$34/hr. depending on experienceShift differential $3.00Sign on Bonus $1,500Quarterly safety bonus opportunitiesDaily Pay Options: We offer the ability for you to access up to 50% of the wages already earned, daily, prior to the bi-weekly pay day. Shift Days and Hours:2nd ShiftBenefits starting DAY ONE! Why Trulite: Trulite offers the most comprehensive benefit coverage in theindustry. Including immediate access to all health, dental, visionand life insurance for you and your family. Our commitment toyou as a member of our team also includes both Long Term andShort-Term Disability coverage to help protect you financially. Because we value your financial health, we provide not only acomprehensive wellness initiative, but we also provide financialliteracy, providing all employees with a comprehensive financialwellness program. This includes access to a percentage of yourpay daily if needed and a progressive financial training program. Stay with us for a year and your 401k employer match is 100%vested and immediately becomes part of your ever improvingfinancial plan. This is also true for those who select andcontribute to their Health Savings Account. We match on bothemployee and family coverage to help cover out-of-pocketexpenses and if unused continues to grow until need. Employermatch is also vested immediately at 100% improving yourfinancial health. Trulite bears most of the cos of your benefits. Westructured these benefits because we care not only about yourphysical wellbeing but your financial health and welfare too. Letus show you a way to financial independence while being avaluable member of our team. Who You Are: The Ideal candidate will have 5+ years industrial maintenance experience in an industrial setting. Glass industry experience preferred. What You Will Be Doing: As a Maintenance Technician, you will be responsible for providing maintenance and repairs to our production equipment in order to ensure that production downtime is kept to a minimum. All activities must be performed according to corporate and plant safety standards. DUTIES AND RESPONSIBILITIES(other duties may be assigned): Advises management of new developments which may affect profit, schedule, costs, and/or departmental relations.Engages in mechanical and electrical repair and maintenance of electric-power generating equipment, and transmission, distribution, and control equipment of electric power utility.Confers with contractors to resolve problems in installation of new equipment, servicing, and repairing equipment and to assist in start of new plants or additions.Performs preventative and predictive maintenance on facility machinery.Communicate with operators from other shifts.Resolves problems using working knowledge and solutions that improve operations, and develops recommendations involving new techniques, technologies, or concepts.Maintains a working knowledge of safety policies and regulations to ensure duties of self and others are performed in a safe manner.Understand and analyze levels of line downtime caused by equipment issues and associated causation.Analyze test results, machine error messages, and information obtained from operators to diagnose equipment problems.Examine parts for defects such as breakage and excessive wear.Troubleshoot electrical, mechanical, pneumatic and hydraulic systems.Follow diagrams, sketches, operations manuals and manufacturer’s instructions.Diagnose CNC equipment and PLC control systems.Locate root problems and perform repairs.Operate newly repaired machinery and equipment to verify the adequacy of repairs.Report any faulty or inefficient equipment.Record repairs and maintenance performed, parts and materials used, requisition new parts and materials as necessary.Assist with the inventory of replacement parts and supplies by checking stock to determine inventory level.Control downtime by informing production workers of routine preventive maintenance.Operate cutting torches and welding equipment to fabricate, cut or join metal parts.Use tools ranging from common hand and power tools, such as impact drills and wrenches, to precision measuring instruments and electronic testing devices. Skills You Bring: MINIMUM SKILLS AND REQUIREMENTS: Candidates must have prior industrial maintenance experience to qualify.Working knowledge of three phase motors, programmable controls, circuits, computer interfaces, PLC’s, VFD’s.Able to read and understand electrical schematics and blueprintsAble to read and interpret documents such as safety rules and procedure manuals.Must have working knowledge of mechanical, hydraulic and pneumatic troubleshooting.Able to use tools including hand tools, powered tools, diagnostic tools and computer programsTest and repair water distribution, and compressed air systemsAble to define problems, collect data, and draw valid conclusionsAble to operate a forklift truckBasic computer and e-mail skills We are an Equal Opportunity Employer. We embrace and encourage our employees’ differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique. #tlgamidwest

1. Performs regularly scheduled preventative maintenance on general electrical and plumbing systems, conveyor systems, electronic sorters, forklifts and various other powered material handling equipment. 2. Performs troubleshooting on equipment breakdown as instructed including disassembly, repair, parts replacement and parts fabrication to minimize equipment downtime. 3. Performs general carpentry, painting, electrical, welding, plumbing and HVAC installations as required. 4. Installs and repairs DC storage racks as required. 5. Maintains and completes various maintenance documents including but not limited to work order requests, preventative maintenance and daily job breakdown summaries, parts requests and parts purchase orders. 6. Performs semi-routine duties where some judgment is required. Work is performed under defined and uniform procedures. 7. Exhibits reasonable care and operation of powered material handling equipment. 8. Maintains the integrity of our Mission, Vision and Values statement while performing daily job duties.Qualification1. Strong English, reading and Math skills required. 2. Three to five years electrical, mechanical and maintenance related experience is required. 3. Strong mechanical, welding, carpentry, plumbing and AC/DC electrical circuitry knowledge through 440, 3-phase required. 4. Excellent hand and eye coordination required. Ability to climb and work at high elevations required. 5. Ability to interpret blueprints, schematics, utilize basic hand tools and electrical and/or electronic test equipment including volt/ohm meters and amp probes strongly preferred. 6. Ability to handle multiple tasks, be detail oriented, meet department standards and perform duties without immediate and constant supervision. 7. Previous Computer Maintenance Management System (CMMS) knowledge preferred. 8. Previous experience in the repair of powered material handling equipment strongly preferred. 9. Ability to perform physical activity at a sustained pace within the Distribution Center environment including walking, bending and lifting a minimum of 60 pounds is required.We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws.

Job Description Summary Performs maintenance and general repair services in specified markets of anywhere from 10-15 of our Kohl's stores, ensuring Company Brand Standards are maintained. Mileage is reimbursed for travel to and from the stores in the specified market. Performs all work in a quality manner following all safety rules and regulations. Responsible for meeting budgets and communicating effectively with both internal and external customers.ACCOUNTABILITIESGENERAL MAINTENANCEResponsible for timely and accurate completion of work orders as assigned by supervisorEnsures all necessary material and tools to perform daily work are available and kept in good condition (Kohl’s provides all needed tools)Performs Interior Store Repair and Maintenance as assigned by Territory Facilities Manager with a focus on Door (interior and exterior) and Plumbing (faucet, toilet, hot water heater, etc.) repairPerforms Interior Lighting and Electrical repairs including but not limited to lamp/ballast replacement, minor outlet repairs, once per year 90 minute emergency light testing and repairs, etc.Proficient in other Interior Repair and Maintenance items including but not limited to flooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, fixture, and stroller/ cart, and cleaning equipment repairsPerforms exterior maintenance of building including but not limited to low elevation (can be reached with a 12ft ladder), building painting, curb/ramp painting, power-washing, and minor Common Area Maintenance repairs of landscaping, signage, and concrete/asphaltIDENTIFY MAINTENANCE ISSUES Assists stores with Housekeeping problem solving with suggested solutions for Store Associate teams and Contract Cleaning providers to increase CLEAN presence in stores.Communicates safety and cleanliness issues and action plans to resolve with Store Management and Territory Facilities ManagerIdentifies Interior and Exterior maintenance issues that need resolution by exterior vendors and enters those issues into Web Based Facilities Management program for assignment and completionCommunicates recaps regularly to Territory Facilities Manager and/or Store and District Managers of stores visited, wins/opportunities found, as well as issues resolved on store visits. Communication may be verbal or email QUALIFICATIONSREQUIREDAbility to work independently without direct face to faceAbility to effectively communicate with multiple levels in Store organization verbally and writtenProficient in Microsoft Word, Excel, navigation of websites and able to utilize new computer systems, including smartphones1-4 years of prior maintenance work with a strong focus in Door, Plumbing, Electrical / Lighting, and general repair servicesPrior retail or office building maintenance experienceFamiliar with General Maintenance tools and tasksPREFERREDAbility to repair a variety of other interior/exterior issues as assigned by Supervisor including equipment and CAM itemsSPECIALModerate lifting – 25 to 50lbs on a regular basisDaily travel to local stores and occasional overnight travel to outlying stores. Mileage reimbursement provided.Ability to climb/work on ladders up to 12ft in height in order to address lighting, painting, etc. issuesValid driver’s license with a currently registered vehicle

The pay range per hour is $28.20 - $31.68Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities - Maintenance Technician 1 (MT1)About job:Currently hiring for below shifts:A2 Key - Saturday, Sunday, Monday from 5:00pm to 5:00amup to $3.00 shift differentialTuition Reimbursement programBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Equipment Service TechnicianLocation:East Liberty, OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekendmaintenancerepair and PM activities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation$5,000 Sign-on BonusHourly rate starting between $33.65- $38.451.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Put the wheels back in motion. Be a Wizard.As a Wheel Technician with Dent Wizard, you’ll use the latest tools and techniques to restore wheels and wheel covers – and we’ll reward you with uncapped earning potential. We’re hiring now in Columbus, OH.for a hard-working individual with the skills and outgoing personality to keep things rolling.Working on site at customer locations, you’ll fix cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels) using spray-painting equipment, power tools and work aids. The process involves removing the wheels, repairingthem in your mobile truck and placing them back on the vehicle.Tasks include painting surfaces, inspecting wheels, prepping and buffing defects, mixing colors and finishing.The Dent Wizard DifferenceUnlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision,401(k), paid vacation and moreOutstanding perks, including tools and supplies, company truck, gas card and moreEnvironmentally friendly trucks with explosion-proof filtration and fixtures, outfitted with premixed and pre-matched OEM wheel colorsIndependence to manage your day; no micromanagement Fun and dynamic team where everyone is supportive and has your backVariety of work on many types of cars, both new and old modelsThree weeks of trainingat one of our facilities with Master Wheel Techs to help you learn advanced techniques We pay for the training, pay you a salary while you train and provide travel and lodgingDevelop your technical and customer service skillsonce you are on the job, with assistance from experienced Techs Advancement potential into higher Tech levels (with more $) or management rolesWhat You Need to SucceedAuto painting experience or collision repair technical school training preferred but not requiredVision abilities including close, distance and color vision, depth perception and ability to adjust focusToughness and grit to work outside in all kinds of weatherStrong organizational and communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyPhysical stamina to kneel, bend, squat and climb, as well as lift up to 45 poundsValid driver’s license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location.This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between$50,000 and $65,000 annually.We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent WizardDent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offerCompetitive pay.Paid vacation, holidays, and sick time.Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis skilled position involves installing, programming, troubleshooting, configuring, commissioning, and servicing Fire Alarm Systems at customer sites including panel repair/reprogramming, device replacement/repair, resolving low voltage circuit troubles, and system testing. Organize and effectively utilize technical resources, information, material, and support to ensure efficient execution of all assigned tasks.How you will do itPerform installation/programming on fire alarm systems.Responds to customer service calls in a timely and efficient manner, troubleshooting and repairs as needed.Will be required to participate in the after-hours service program.Communicates with central dispatch on current work order status and receives updates on outstanding customer issues.Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational/product manuals.Supervise and inspect the installation of equipment to meet customer and contract specifications.Completes necessary certification courses on internal and external products used.Complete and submit all required task-related, activity, productivity, and other documentation on time.What we look forRequired3+ years of documented experience in low voltage electrical systems, including Fire/Life Safety Systems, Access Control, CCTV, and Security Systems.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Experience with hand tools test equipment, multi-meter usage, digital analyzer, and commissioning devices.High School Diploma or equivalent required.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Demonstrates a prominent level of customer service.Ability to lead & work well with team members.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, a positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Able to obtain and retain any licenses that are required by National, State, and Local codes.Must always comply with safety guidelines.Working knowledge of electronic and digital test equipment.Basic understanding of Network concepts and architectures.Ability to multi-task and prioritize in a short time.This role requires a minimum of a State of Ohio Fire Protection License.PreferredTwo-year Associate's Degree in Electronics; Network; Computer Science or a related field.NICET level II or ability to obtain in the first year.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Legal Entity: Honda Dev. and Mfg. of Am.,LLCBusiness Unit: Power Unit/Chassis Dev BUDivision:Power Unit Development DivisionWork Location: Auto Development CenterHiring Manager:Nathan ThuerkShift:1stCareer Level:4Job Grade:Exempt-2Job PurposeTo develop and guarantee the correct powertrain hardware package required to meet all developmental, marketability, and regulatory targets. To actively manage test and development schedules and data input from multiple departments and divisions across HDMA.Key AccountabilitiesStrategy: Gather the latest global hardware specs from 4MOC / ADC and compile a comprehensive plan for application to future, responsible development models.Advise: Work directly with all powertrain related function groups to guarantee harmonious hardware maturation schedules and lead critical meetings to resolve conflicts between competing groups / departmentsProblem Solving: Support investigation of hardware / calibration issues that come up during development and develop corrective hardware plans as necessaryCommunication: Clearly and concisely report the status of hardware / calibration maturation to both function management side as well as team sideAuthorize: Lead regular test data review meetings and MaruQ preparation events to validate the hardware and calibrations that are being applied to a development.Qualifications, Experience, and SkillsMinimum Educational Requirements:BS or MS in Mechanical, Electrical, or Chemical EngineeringMinimum Experience:8 years related experience or equivalent level of education and experienceOther Job-Specific Skills:Proficient PC skills, including but not limited to excel, PowerPoint, and MatlabJob DimensionsNo. of Direct Reports: 0No. of Indirect Reports: >10 full time associatesFinancial Dimensions: >$250KDecisions ExpectedSetting the hardware application and verification plans for engineVerifying the hardware and calibration meets all marketability and regulatory requirementsResolving hardware based concerns that arise from developmentWorking ConditionsAssociate will work on the actual engine / vehicle with hand and power tools. Candidate can expect to spend a portion of their time working in the lab – confirming their systems on bench, on the car, or in thermal chambers. (20%)Associate will perform analysis and documentation, then communicate findings to varying levels of management. (80%)Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Columbus, OH!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Responsibilities: Performs all assignments in accordance with safety specifications, instructions, and requirementsDemonstrates ability to meet production standards on specific assignments within required timeMaintains good housekeeping and clean work areas in assigned spaceReports all production waste to Production Lead or SupervisorResponsible for safety and quality throughout productionResponsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintainedPerforms other duties as required by Supervisor or ManagerFollows all company policies and procedures Requirements: High School diploma or equivalentExperience working in a Manufacturing EnvironmentAbility to work in a fast-paced environmentUnderstand plant safety guidelines and pass all required safety trainingMust be able to understand verbal and written instructionsTroubleshoot problems and report issuesMust work well in team environmentAbility to be on feet up to 8-12 hours per shiftUse of hands and fingers to perform job functionAbility to stoop, kneel, bend and climbAbility to lift up to 35lbs #INDMTVDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeTo contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality.Key AccountabilitiesDevelop complex component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites with limited supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required.Establish or contribute to establishing cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing difficult part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas.Create and manage schedule of individual work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources with limited supervision. Consistently communicate project status and participate or lead project meetings, discussions, and development events.Generate high-level ideas and contribute to building strategies that support the evolution of new technologies. Support or lead maturation of ideas to prepare for development applications with limited supervision.Support market quality themes with limited supervision. Utilize problem-solving methods to analyse root causes. Develop and implement C/M specs as necessary limited supervision.Qualifications, Experience, and SkillsMinimum Educational Qualifications:Bachelors Engineering Degree in related fieldMinimum Experience:5+ years engineering experience preferably in Powersports or Automotive fieldOther Job-Specific Skills:Strong leadership, coaching and mentoring skillsAbility to interact/communicate effectively with staff/managementMust be able to operate with high level of confidentialityCompetent in FTA, FMEA, dimensional tolerance stack-ups and applicationCompetent analytical, problem solving, judgement, decision-making and prioritizationCompetent drawing and layout skills/techniques, include understanding of CAE principlesCompetent in creating a plan and scheduleCompetent in understand product development schedulesJob DimensionsNo. of Direct Reports: 0No. of Indirect Reports: 0Financial Dimensions: $0Decisions ExpectedPropose spec and drawingsPrioritization of individual workloadBalance of QCD for basic situations in individual area of responsibilityWorking ConditionsTravel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel.Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending.Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts.Overtime: Overtime expected based on project demands/responsibilities.Maintains professional conduct and follows all departmental, safety DEPARTMENT, and COMPANY policies, Procedures, AND rules.What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Columbus, OH!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doPerform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components.Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers.Be part of an expanding team of the best technicians in the industry while you build career with a first class global organization.Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do itLoading Johnson Controls field and network level controller software.Performing commissioning and system diagnostics for all levels of system controllers as well as enddevices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents changes and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintainedEngage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredVocational School four year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience or 2+ years experience in servicing electronic and/or mechanical systems in the HVAC industry.Strong understanding of HVAC systems, sequence and applicationsDemonstrated technical aptitude in mechanical and electro-mechanical fieldsAble to use hand, power tools and electrical testing equipment such as a multi meter.Solid knowledge base in use of personal computers.Attention to detail.Good communication and listening skills.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

ENSURING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment