We are currently seeking a motivated individual to be a part of our growing Powell Automation Division (PAD). This exciting position allows the ability to not only grow professionally but also fuel the future presence of PAD in the automation space! As a member of PAD you will work and collaborate with diverse professionals to apply innovative and creative solutions to solve problems for our clients. Key responsibilities include engineering, testing, maintaining and supporting automation solutions as well as intelligent products in MV/LV switchgear applications.Posted position does not provide visa sponsorship or relocation.Job ResponsibilitiesBecome proficient in PAD solutions and offeringsReview and interpret client specifications to produce project Functional Design, drawings and test documentation in accordance with the project requirements and Powell standard procedures.Develop relay configuration files using various manufactures such as SEL, GE, Siemens and Beckwith.Design and configure SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC AcSELerator Diagram BuilderUse common industrial communication protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP 3.0, etc.Develop PLC based electrical system monitoring and controls solutions.Participate in and develop documentation for factory and on-site acceptance testing (FAT and SAT respectively), as well as perform start-up and commissioning activities as requiredEnsure that the company's Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services.Provide technical guidance to internal and external stakeholders, including after sales support.Minimum QualificationsBS in a technical discipline, preferably an Electrical Engineer, from an accredited institution with a minimum of six (6) + years of relevant work experienceExpertise and experience in at least one of the following is required: Automation and Control systemsProtective Relay programming and commissioningPLC applications for SwitchgearExperience developing, integrating, installing, and commissioning industrial control systems using PLC and HMI solutions.Experience with PLC logic programming and HMI programming. Experience with Rockwell, Schneider, Siemens, and ABB software a plusExperience with common industrial protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP3, Profibus, etc.Knowledge of 3 phase power is requiredExperience configuring, testing, and commissioning relays. Experience with SEL, GE, and Siemens microprocessor relays is plus.Skills, Abilities, and Other Requirements Excellent customer relation, verbal, and written communication skillsStrong analytical and trouble shooting skillsAble to work effectively in a team setting or independently, able to adapt to change, self-starter, innovative, and willing to make a differenceAble to mentor less experienced engineersWillingness to travel locally at least 25%More InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.#LI-BH3About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

9860 York Alpha Dr #3586, North Royalton, OH 44133 Design Engineer - Aerospace Tool and Die Cutting Edge Projects with Top Tier Technology Positive, Family-Friendly Work Culture & Great Benefits1st Shift 3 – 5+ Years of Aerospace Design Engineering RequiredLunar Tool & Mold is one of Ohio’s leading aerospace companies with over 58 years of designing and machining tools and molds with superior quality and precision. We're seeking a highly skilled and innovative Design Engineer specializing in Tool and Die to join our dynamic team. As Design Engineer, your expertise will play a crucial role in guaranteeing precision, efficiency, and reliability across our operations. In our air-conditioned, well-lit, and pristine Engineering Department, you'll find cutting-edge computers and the latest NX software, ensuring optimal conditions for your productivity and creativity to flourish. You will be involved in various tasks including first article and existing article quotation processes, handling day to day design requests from the customer, ensuring tools are manufacturable and conform to the customers design specifications and requirements, along with general part modeling and tool troubleshooting. This is your opportunity to be part of cutting-edge projects that push the boundaries of innovation and technology. The tooling we construct will serve customers worldwide, delivering essential parts across the globe. Don't pass up the chance to collaborate with the best machining team in Northeast Ohio!If you're ready to make your mark and contribute to groundbreaking advancements in aerospace technology, we want to hear from you! We offer:Competitive salary $65,000 - $80,000+ a year commensurate with experience and qualificationsFull-time, 1st Shift, Monday to FridayAnnual bonus payoutProfit Sharing ProgramFull Family Benefits – Medical, Dental and Vision InsuranceShort- and Long-term Disability InsuranceLife Insurance401(k) Retirement Plan with Company MatchFlexible Spending AccountPaid vacation, holidays & sick timeVideo or phone interviewing to accommodate out-of-town applicantsWe continuously reinvest in top-tier machinery, prioritizing quality above all elseExciting projects and challenges at the forefront of aerospace innovationProfessional development and training programs to support your growthSecond-generation firm operating since 1965Responsibilities - Aerospace Design Engineer:Work jointly with ownership and staff Work with clients to meet their requirements First article and existing article quotation input Ensuring manufacturability Read and use internal common approach documentation and template files for best process on record Receive and delegate tasks to/from Machinists and CNC staff tasks to meet the requirements of the tool Help direct the build of the tooling to meet the customer's due date Follow common safety procedures and good house keeping Requirements - Aerospace Design Engineer:3 – 5+ years of experience as an aerospace design engineer Proficiency in Siemens NX Unigraphics, SolidWorks, and/or Pro-E 1 - 2 years’ experience modeling/design for aerospace core/wax dies, jet engine blades/vanes and auxiliary parts/equipment Good time management/organizational/communication skills to meet deadlines Strong mechanical aptitude and accuracy Ability to coordinate with others on multiple project designs Ability to work independently and drive projects towards completion Common computer experience outside of Modeling programs like Microsoft office products Resume must be uploaded to be considered. Completing the optional online assessment will grant you priority consideration!Must pass pre-employment screeningWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonus planPaid vacation/holidays/sicktime - 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities With outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out: A Day in a Life at Johnson Controls:What you will doResponsible for leading and developing the long-range planning of the Engineering Team to support the broader offerings which JCI is bringing to our customers. These offerings are part of our growth strategies and would include Corporate Clients, Design Build, Fire & Security, Integration Solutions and Vertical Market Solutions. Employs practices and develops processes to ensure cost effective engineering while providing consistent delivery and customer satisfaction. Teams effectively with corporate, project field teams, sales teams, and Area Management.How you will do itDevelop Engineering Team strategic business plan consistent with Systems & Services' account management plans, mission, and objectives. Understands the business environment of area markets and works with the Area Management Team to support this.Develops strategies to deliver the "JCI Way" of field-tested standard applications that are reusable, installable, and serviceable.Works with Sales to develop relationships with our customers that will help us penetrate the Design Build Market.Reviews with Sales Management the upcoming sales forecasts to make sure that the Engineering Team has the right quantity and ability of resources to effectively support the future work.Manages and schedules the workload of the engineering team. Prioritizes work, supervises, and coordinates projects to ensure progress and timely completion of the engineering portion. Provide timeframe estimates to project management for job cost evaluation.Develops, implements, monitors, and communicates the Engineering team processes, strategies and standards. Provides engineering input to assure proper project costs at pre-bid and upon project completion.Works with and understands financial, contract management and other management reports.Maintains high level of engineering standards. Ensures maximum reuse of designs and programs. Develops and maintains the area standard systems engineering library.Mentors and coordinates development of team members. Develops team employees through implementation of their personal development plans, goal setting and timely performance reviews.Develops standards for material procurement. Establishes and maintains, with the cooperation of the Estimator, the Area's standard subset of materials.Works with field installation teams to ensure timely delivery of contracted engineering in order to maximize successful execution.Adheres to safety standards. High degree of regard to employee and subcontractor safetyWhat we look forRequiredBachelor's degree in engineering, with 8-10 years of progressively more responsibility in the construction industry.Prior experience in supervision of a technical/engineering group.Understands accounting principles and cost management.Good oral and written communication skills, especially in the presentation of technical material.#LI-YS1Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

The Aerosol Project Engineer will manage product development projects from concept to commercialization. Your expertise in aerosol technology and engineering principles will drive innovation and optimize processes to deliver superior products. Join a global leader as we continue to develop cutting-edge plastic packaging and shape the future of aerosol technology!You Will:Manage aerosol development projects; including planning, scheduling, budgeting and resource allocation.Apply in-depth knowledge of aerosol technology to develop innovative products.Provide subject matter expertise on formulation, propellant selection, valve design, filling processes, and product testing.Collaborate with cross-functional teams to meet customer expectations, quality standards, and regulatory requirements.Identify opportunities to optimize manufacturing processes, reduce cost, and ensure adherence to safety and environmental requirements.Maintain knowledge of regulations and standards governing aerosol products (e.g., PHMSA, CPSC, FDA, EPA, REACH) and ensure compliance throughout the product development lifecycle.Drive continuous improvement to enhance product performance, efficiency, and sustainability.Partner with R&D, manufacturing, quality, supply chain, and regulatory affairs teams to achieve project objectives and deliver successful products.You Have: Associate’s degree required; Bachelor’s degree preferred.Minimum of five (5) years’ experience in aerosol product development, engineering, or manufacturing.Experience in the consumer packaged goods (CPG) industry preferred. Understanding of regulatory requirements for aerosol products. Strong project management skills. Excellent communication and interpersonal skills to operate as an effective leader and representative of Plastipak. Ability to travel (10-20%).Plastipak is an Equal Opportunity EmployerIn order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak’s Privacy Policy to understand how Plastipak uses and protects the information that you provide.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Build your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base, plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation in the first yearComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneCompany vehicleEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month service/technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ Security products and services. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree in Business, Engineering or equivalent and graduating in December 2024 or May 2025, Program starts June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skillsU.S. Citizenship or Permanent ResidencyPreferred:Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Description: Milton Hershey School (MHS) is one of the world's best private schools, where students in pre-K through 12th grade from disadvantaged backgrounds receive an exceptional career-focused education with housing, meals, and moreand all costs are covered. Thanks to the generosity of Milton and Catherine Hershey, who founded the school in 1909, the school is fully endowed and has the resources to ensure both students and staff are provided everything they need to thrive. MHS is hiring married couples to become flex houseparents. Flex houseparents are couples who reside in on-campus student homes, guiding and nurturing a group of approximately 8-12 students. Flex houseparents provide a consistent family-like structure for students and handle responsibilities such as driving, administering medication, budgeting, reporting, etc. When initially hired, flex houseparents cover different student homes before being assigned to one specific home. Benefits ·Salary of $43,825 per person (a total compensation package of approx. $150,000 per couple which includes free housing, meals while on duty, utilities, and more) ·Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings ·Relocation assistance and paid training provided ·Schedule of nine days on followed by three days off. Workdays include a period of personal time while students are at school ·Three-week paid summer vacationQualifications: ·Experience working or volunteering with youth, preferably from under-served settings ·This is a two-person job for couples who have been legally married for at least two years ·Both spouses should be age 27 or older ·No more than three dependent children may reside in the student home ·Abide by a smoke-free and weapon-free campus. No alcohol is permitted while on duty ·Limitations on pets. Only fish and one dog of approved breeds is permitted ·Valid driver’s license; ability to become certified to drive student home vans ·Couples must be comfortable leading students in daily devotions and take students to Judeo-Christian Sunday chapel services (Note: Proselytizing is prohibited) ·High school diploma or GED required ·Must be able to lift up to 50 lbs. ·Candidates must demonstrate a high degree of integrity as all staff are role models for students. ·Both spouses must complete an individual employment application This is a unique career path that takes consideration and commitment from both spouses. If you have any specific questions before or after applying, please reach out to our recruitment team at .

Description: Milton Hershey School (MHS) is one of the world's best private schools, where students in pre-K through 12th grade from disadvantaged backgrounds receive an exceptional career-focused education with housing, meals, and moreand all costs are covered. Thanks to the generosity of Milton and Catherine Hershey, who founded the school in 1909, the school is fully endowed and has the resources to ensure both students and staff are provided everything they need to thrive. MHS is hiring married couples to become flex houseparents. Flex houseparents are couples who reside in on-campus student homes, guiding and nurturing a group of approximately 8-12 students. Flex houseparents provide a consistent family-like structure for students and handle responsibilities such as driving, administering medication, budgeting, reporting, etc. When initially hired, flex houseparents cover different student homes before being assigned to one specific home. Benefits ·Salary of $43,825 per person (a total compensation package of approx. $150,000 per couple which includes free housing, meals while on duty, utilities, and more) ·Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings ·Relocation assistance and paid training provided ·Schedule of nine days on followed by three days off. Workdays include a period of personal time while students are at school ·Three-week paid summer vacationQualifications: ·Experience working or volunteering with youth, preferably from under-served settings ·This is a two-person job for couples who have been legally married for at least two years ·Both spouses should be age 27 or older ·No more than three dependent children may reside in the student home ·Abide by a smoke-free and weapon-free campus. No alcohol is permitted while on duty ·Limitations on pets. Only fish and one dog of approved breeds is permitted ·Valid driver’s license; ability to become certified to drive student home vans ·Couples must be comfortable leading students in daily devotions and take students to Judeo-Christian Sunday chapel services (Note: Proselytizing is prohibited) ·High school diploma or GED required ·Must be able to lift up to 50 lbs. ·Candidates must demonstrate a high degree of integrity as all staff are role models for students. ·Both spouses must complete an individual employment application This is a unique career path that takes consideration and commitment from both spouses. If you have any specific questions before or after applying, please reach out to our recruitment team at .

Description: Milton Hershey School (MHS) is one of the world's best private schools, where students in pre-K through 12th grade from disadvantaged backgrounds receive an exceptional career-focused education with housing, meals, and moreand all costs are covered. Thanks to the generosity of Milton and Catherine Hershey, who founded the school in 1909, the school is fully endowed and has the resources to ensure both students and staff are provided everything they need to thrive. MHS is hiring married couples to become flex houseparents. Flex houseparents are couples who reside in on-campus student homes, guiding and nurturing a group of approximately 8-12 students. Flex houseparents provide a consistent family-like structure for students and handle responsibilities such as driving, administering medication, budgeting, reporting, etc. When initially hired, flex houseparents cover different student homes before being assigned to one specific home. Benefits ·Salary of $43,825 per person (a total compensation package of approx. $150,000 per couple which includes free housing, meals while on duty, utilities, and more) ·Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings ·Relocation assistance and paid training provided ·Schedule of nine days on followed by three days off. Workdays include a period of personal time while students are at school ·Three-week paid summer vacationQualifications: ·Experience working or volunteering with youth, preferably from under-served settings ·This is a two-person job for couples who have been legally married for at least two years ·Both spouses should be age 27 or older ·No more than three dependent children may reside in the student home ·Abide by a smoke-free and weapon-free campus. No alcohol is permitted while on duty ·Limitations on pets. Only fish and one dog of approved breeds is permitted ·Valid driver’s license; ability to become certified to drive student home vans ·Couples must be comfortable leading students in daily devotions and take students to Judeo-Christian Sunday chapel services (Note: Proselytizing is prohibited) ·High school diploma or GED required ·Must be able to lift up to 50 lbs. ·Candidates must demonstrate a high degree of integrity as all staff are role models for students. ·Both spouses must complete an individual employment application This is a unique career path that takes consideration and commitment from both spouses. If you have any specific questions before or after applying, please reach out to our recruitment team at .