We are looking for Flaggers to join our team!
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

We are looking for Flaggers to join our team!
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Business Unit Description: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: SUMMARY: DAYS AND NIGHT SHIFT POSITION AVAILABLE. 6m-630pm or 6p-6:30a 2-2-3 SCHEDULELooking to Hire experienced electrical/E&I/Automation technicians for our West Jefferson location. Let us show you why we are first in food because we are first in people.This position has the responsibility to comply with safety work rules at all times as well as an obligation to reinforce safety as a core value. Ensures that all policies, procedures and activities, related to food safety & quality, are followed and complied with uniformly, in an effort to reduce product and process variability.The techincian position is responsible for ensuring the equipment productivity and efficiency through troubleshooting, preventive maintenance, corrective maintenance, and monitoring.Tetra Pak or Evergreen experience is highly desired!Automation, electro mechanical, electrical, or E&I experience is recommended.Compensation is above market average for locale. We offer relocation and other competitive benefits.#FirstinpeopleACITIVITIES: Assumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job’s duties/tasks. Adheres to safe work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately. Attends and actively participates in safety meetings/trainings.Ensures regulatory compliance at all times.Complete preventative maintenance requirements on all equipment.Monitor efficiency of all equipment and troubleshoot when necessary.Remove or replace defective parts by dismantling and reassembling equipment.Adjust all necessary components of equipment as needed.Repair and adjust all doors as needed.Must adhere to budget, USDA, OSHA, SQF, and FDA compliance guidelines.Perform other duties as assigned. Qualifications: EDUCATION: High school diploma or general education degree (GED) or equivalent.LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations.MATHEMATICAL SKILLS:Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume and distance.REASONING ABILITY:Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.LICENSES, CERTIFICATES, REGISTRATIONS:Examples of licenses, certificates, and registrations required:Power Industrial Truck Operator’s LicenseBlack Seal License is a plus.OTHER SKILLS AND ABILITIES:Specific skills and abilities required that are not included in other sections:Ability to function in a teamwork environment.Must be well-organized.Must be detail oriented.Ability to plan and prioritize activity.Ability to comply with all safety rules and regulations.Basic computer skills.Ability to work safely with chemicals

Compensation Details:$24.00-$27.00Why should you join our team We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don’t often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, to Ace retailers and to the Ace brand.In addition to providing our employees a great culture, Ace also offers competitive benefits* that address life’s necessities and perks, many of which expand and improve year after year, including:Weekly PayPaid Time Off Programs (incl. vacation, paid sick time, holiday pay). Newly hired full-time employees will receive a one-time pro-rated allocation of up to 24 hours of vacation in their first calendar year depending on the month of hire. Paid sick time in accordance with applicable state law. You will receive up to 9 holidays per year, depending on the month of hire.Comprehensive health coverage (medical, dental, vision and disability – up to 26 weeks short-term disability and long-term disability) & life insurance benefits for you and your dependents.Generous 401(k) retirement savings plan with a fully vested matching contribution the first year in addition to quarterly contributions and annual discretionary contribution (once eligibility requirements have been met). Over the past 5 years, company contributions (matching, quarterly & discretionary) for fully eligible employees have averaged 9.6% of total eligible compensationDock to Driver Program: Ace will pay for your CDL License and Training to provide a career path transition to a Driver positionLong-term Career Opportunities:Many of our leaders started with Ace looking for a job, just like you, but found long-term career opportunities at our 15 Distribution Centers across the country and our Corporate Headquarters.Our company is growing, and we would love to have you grow with us!Tuition Reimbursement ProgramEmployee Recognition ProgramMerchandise Discounts on Top Brands like Weber, Traeger, Yeti, Craftsman, DeWalt and thousands more!Employee Assistance Program (EAP) – access to free visits to therapists and lawyers, guidance on financial matters, elder and childcare, and assistance with tickets to entertainment events.Adoption cost reimbursementIdentity theft protection* Benefits are provided in compliance with applicable policies.Job Description:Maintenance MechanicWhat You’ll DoKnowledge of machines and tools, including their designs, uses, repair, and maintenance.Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.Perform routine preventive maintenance or repair to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.Inspect, operate, or test machinery, equipment, or systems to diagnose machine malfunctions.Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists.Record type and cost of maintenance or repair work.Ace Hardware is committed to promoting and maintaining a safe, healthy and injury-free environment for all team members. This is our number one priority, and we will support programs and initiatives that focus on this commitment. It is critical that all team members take responsibility for their safety as well as the safety of others to ensure that Ace Hardware is a world class safety organization.What you need to succeed:Be a safety champion by promoting a safe and productive workplace through your own actions, including the proper use of PPE, safe operation of powered equipment and safe lifting techniques as determined by the role.Be an active participant in contributing to a successful safety culture in the facility.High school diploma or GED equivalent preferred.Must be at least 18 years of age.Ability and willingness to work non-traditional shifts and hours.Experience with general maintenance/ electrical duties preferred.Have general knowledge of conveyors systems, and ability to trouble shoot.Ability to CMMS and good computer skills for utilizing PM Software system.Maintenance experience within a manufacturing/ distribution environment.Want to be notified when new jobs are posted Follow the link below to create an account and set up custom job alerts:Create Job AlertWe want to hear from you!When most people think of career opportunities with Ace Hardware, they often think of the helpful cashiers and sales associates at their local store. However, have you also considered the people behind the scenes who select, promote, ship and process the invoices for more than 75,000 products Maybe you haven't, but we'd like you to. Because together we help our customers take care of their homes. Come find out why a career with the Ace Hardware Corporation is one of America's best kept secrets.Equal Opportunity EmployerAce Hardware Corporation is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws.DisclaimerThe pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual’s education, training and experience, the position’s work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written “Position Description” is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Corporation reserves the right to change job duties, including essential job functions, according to business necessity.Want to be notified when new jobs are posted Follow the link below to create an account and set up custom job alerts:Create Job Alert

Be part of the future!We are one team, dedicated to working collaboratively to createthe purposefulsolutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, andwe’llgive you the space and opportunities to grow and succeed.We are committed tomakea difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HAS)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAndMore!What you will doWorking Foreman must be a skilled craftsman in their trade and have a minimum of five (5) years actual, practical working experience in the industrial HVAC chiller, plumbing, pipefitting and /or mechanical equipment service industry.How you will do itA self-starter who must be able to lead a project team of technicians. Interaction with customers, attention to detail in quoting jobs, scheduling technician hours, promoting safety and constant communication plays a key role in this position. Must be computer literate with necessary ability to develop, close and manage all types of quoted work.What we look forRequiredMechanical Journeyman License5+ years of commercial HVAC experiences mechanical troubleshooting experience.Valid driver's license, appropriate licenses to work with refrigerants, boiler and steam operational & service knowledge.Good verbal and written communication skills

Req ID:449234Address: 976 State Route 97 Bellville, OH, 44813Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Equipment Service TechnicianLocation:Marysville Auto Plant in OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekendmaintenancerepair and PM activities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation$5,000 Sign-on BonusHourly rate starting between $33.65- $38.451.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Location: Marysville, OhioWorkstyle: OnsiteWage: $34.65 - $39.60$5,000 sign on bonus & Relocation assistance outside 50miles.About this Position: This position is within the Facilities department within Honda Development & Manufacturing of America, LLC’s (HDMA). The Facilities department is responsible for the building which includes new construction, remodels, utility management (electric, compressed air, natural gas, water), building maintenance, end of life equipment replacements and upgrades. The goal of the department is to create a facility that we are proud of and serve our customers.Role Description:Work on a team to perform facilities equipment preventative maintenance, repairs, improvements, and reporting, to maintain a high level of customer service in building, equipment, and utility operations. Continuously develop associate skills through Honda maintenance training program and find ways of introducing technologies and efficiency improvements.Responsibilities include:Complete preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical, HVAC, and building controls). Perform daily assigned work order tasks and communicate any follow-up neededEvaluates and recommends equipment improvements to improve availability, capability, and yield. Suggest and revise PM's to properly maintain facilities equipmentPerforms equipment failure analysis (including preventative and unscheduled maintenance). Troubleshoots and diagnose equipment problems. Participate in a reliability centered maintenance program for equipment. Participate in team activities to develop and maintain long term equipment reliability. Support total equipment management through daily and proactive activities to improve operations, promoting business targets and objectives.Provide mentorship and teambuilding through work habits, communication and the sharing of knowledge and expertise. Expand and maintain technical expertise through formal and on-the-job training opportunities. Support and engage in activities that drive new ideas, leveraging new technology, new methods and approaches to positively impact HAM’s competitiveness.Who we are seeking: Required Work Experience:Desired: 3 years of experience in a Facilities environment (industrial, or heavy commercial)Will consider well qualified entry level candidates Required Education:Completion of 2 year technical degree or equivalent equipment service experienceDesired skills:Working knowledge of Facilities low and medium voltage electrical equipment (including substations, switches, cable, starters, VFDs, MCC, breakers, bus duct) and Building Management Systems.Ability to troubleshoot mechanical equipment, such as HVAC, Refrigeration, Air Compressors, Air Dryers, Boilers, Cooling Towers, Pumps, Plumbing & Piping.Good written and verbal communication skills with the ability to clearly express ideasComply with Honda Health and Safety PoliciesMinimum computer (Word, PowerPoint, Excel) Self-motivated, creative thinking, and a positive attitude, continuous improvement and customer service drivenMust use time effectively & prevent irrelevant issues or distractions from interfering with work completion.Demonstrate the ability to plan/prioritize work assignments, submit schedules, set clear milestones & completion dates.Demonstrate the ability to collect & analyze pertinent data, identify root cause, and develop effective countermeasures.Additional Position Factors:Workstyle: OnsiteTravel: 5% At Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda. Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment. We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and make us an employer of choice Total Rewards:Competitive base salary Annual BonusIndustry leading Benefit Plans (Medical, Dental, Vision)Paid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement opportunitiesCareer mobility Education reimbursement for continued learningTraining and Development programs Additional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

ABM has a great Building Engineer role for a Data Center. This is a full-time role is operating and maintaining equipment associated with electrical and mechanical operations, safe and proper operation of life safety equipment for a 2nd shift 3pm- 11pm Wednesday-Sunday schedule. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits,visit ABM 2024 Employee Benefits| Front Line Team Members | (Programa de Beneficios de ABM) Building Engineer (Data Center)-2nd shift 3pm-11pm Wednesday-Sunday schedule.Job Descriptions Operates, inspects, and maintains electrical and mechanical equipment. It may also include troubleshooting electrical problems, restoring power when failures occur. Operating electrical breakers and distribution gear including UPS, ATS, and generators as need. Installing and maintain lighting and controls for lighting. Small projects that include installing conduit and wiring.Other responsibilities the electrician will be trained on includes operating, maintaining and repairing equipment associated with HVAC, chilled water system and mechanical operations. Safe and proper operation of life safety equipment and minor plumbing. Responsible to respond to customer requests, submit and close work orders, and perform other duties as assigned.Responsibilities include operating and maintaining equipment associated with electrical and mechanical operations, safe and proper operation of life safety equipment and minor plumbing. Responsible to respond to customer requests, submit and close work orders, and perform other duties as assigned.· Ability to perform all work using the proper personnel protective equipment (PPE).· In strict accordance, ability to perform all applicable safety policies, procedures, and practices.· Attention to detail with good organizational capabilities.· Ability to prioritize with good time management skills.· Can work independently and consistently achieve results.· Communicate effectively, writing and verbally, with clients and peers.· Willing to work flexible hours, weekends, holidays· Ability to lift and move 50 lbs. of equipment; work on platforms, ladders and under a raised floor Military and veteran friendly employer, veterans and candidates with military experience encouraged to apply #300

POSITION PURPOSE The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. DUTIES, TASKS, AND RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized job site.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. CRITICAL SKILLS & KNOWLEDGE Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manuals, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Obtain apprentice licensing in appropriate states. WORKING CONDITIONS Exposure to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity is sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out-of-town/out-of-state projects This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor.EducationRequiredHigh School or betterLicenses & CertificationsRequiredValid Driver's License

Up to $5,000 Sign-On Bonus Shift - Tuesday to Friday, 10-hour shift, 2 PM to 12:30 AM, OT as neededWhat this job involves – The HVAC Mechanic will perform HVAC and mechanical preventive maintenance and repairs primarily on controlled temperature units. This will include hands-on work to complete the necessary work within Jones Lang LaSalle standards and guidelines.What is your day to day Performs troubleshooting, service, and maintenance on Controlled Temperature Units (CTU), HVAC systems including but not limited to controls, air handlers, BMS, BAS, actuators, pumps, valves, dampers, and motors.Operate and maintain the following systems: heating hot water & steam, ventilation equip., air conditioning, water conditioning – treatment and refrigeration skids for cool rooms.Operate & maintain ancillary systems such as cooling towers, pumps, chillers, etc.Install trouble-shoot maintain & repair air conditioning and refrigeration equipment related piping within the unit and controls. Experience in pneumatic and DDC controls, wiring methods, and instrumentation is requiredWork from CAD drawings, prints, schematics, sketches, or verbal instructionsAdapt and install specialized cooling and or heating devices for specific requirements.Experience with water treatment methods, and procedures for cooling and hot water circulation systems including testing of basic parameter, troubleshooting system problems, and repairing of equipment as needed.Performs installation and replacement of relevant HVAC system components.Performs work on a variety of non-HVAC building systems including FLS, doors, plumbing, and electrical as needed.Maintains good tenant relations through prompt and courteous response to tenant requests within the guidelines set forth by JLL.Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required.Contributes and own areas of refrigeration management.Perform work outside of the trade to include other duties as assigned by management including but not limited to painting, light bulb replacement, installation of pipe, plumbing and other maintenance related tasks.Required:Electronic and pneumatic controls and diagrams.1+ years of experience working as a refrigeration & air conditioning mechanic in an industrial or research environment.1+ years experienced in refrigeration and HVAC practices.Preferred:Experience working in a GMP environment2-3 years’ validated CMMS experienceEPA 608 UniversalKnowledge of BAS (Building Automation System) or QBAS (Qualified Building Automation System)Work Environment:Working inside of automated manufacturing distribution center#HVACjobs

Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: This position is responsible for the management, training, scheduling and development of maintenance personnel providing support to the Production/Processing areas at the West Jefferson, OH facility. This newly constructed facility will produce protein drinks.Tetra Pak and Aseptic Equipment PreferredAssumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks.Supervision of maintenance crew.Production support in the Production / Processing areas.Creates work orders and PMs.Responsible for installing new equipment.Troubleshoots problems with equipment.Provides a safe work environment for employees.Recognizes and takes steps to resolve operating problems in order to minimize their impact on the operations.Cooperates with all departments to assure a coordinated work relationship exists at all times.Keeps accurate and up-to-date records (I.E. timecards, downtime records, absentee records, etc.)Enforces company policies in a fair and consistent manner.Encourages suggestions from employees which will improve production, quality, safety and/or control costs of production.Keeps manager informed on operating and/or employee problems which may require their attention or knowledge.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained.Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Responsible for Food Safety and Food Quality of MFI products.#firstinpeople Qualifications: Associate’s degree (AA) or two-year technical certificate in Mechanics and Electronics or a related field Two years of mechanical and electrical maintenance and supervisory experience; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.PREFERRED EDUCATION, EXPERIENCE AND SKILLS: Knowledge and experience supporting Aseptic filling operations. Tetra Pak experience a plus.Knowledge of basic mechanics, welding, electrical, fabrication, preventative maintenance, plant operations and government safety regulations.Able to supervise department personnel in a fair and consistent manner.Be able to recognize problem situations and take appropriate steps to resolve.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information in one-on-one and in group situations. Ability to respond to questions from internal/external customers/vendors at all levels including management.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables

Equipment Service Technician - VQDLocation:Marysville, OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technician responsible for maintaining of equipment. This includes responding to equipment emergency downtime, troubleshooting for root cause and repair as needed.Responsibilities include:Ability to troubleshoot and repair: Robots, Servo Systems, Electrical Systems, Automated Machinery and Mechanical SystemsInterpret electrical, mechanical, and hydraulic prints.Complete assigned work orders and support production members in achieving the lines run rate efficiency.Document daily (all) activity and information in Equipment Management Systems (Maximo)Support weekend preventative maintenance, repair, and plant shutdown activities as well as new equipment installations and equipment modificationsWho we are seeking:Required Work Experience:Preferred 3 months of relevant experience.Required Education:High School Diploma or Equivalent. Two-year degree (Electrical/Mechanical/Industrial) or equivalent equipment maintenance experienceDesired skills:Problem analysis skills, Robots, Servo Systems, Electrical Systems, Automated Machinery and Mechanical Systems, knowledge of Microsoft Office (Excel, Power Point, Word). Time managementAdditional Position Factors:Department Equipment Run TimeDepartment Delivery Run RateEfficiency AchievementPreventative Maintenance On-time CompletionOther Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation1.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doPerform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components.Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers.Be part of an expanding team of the best technicians in the industry while you build career with a first class global organization.Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do itLoading Johnson Controls field and network level controller software.Performing commissioning and system diagnostics for all levels of system controllers as well as enddevices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents changes and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintainedEngage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredVocational School four year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience or 2+ years experience in servicing electronic and/or mechanical systems in the HVAC industry.Strong understanding of HVAC systems, sequence and applicationsDemonstrated technical aptitude in mechanical and electro-mechanical fieldsAble to use hand, power tools and electrical testing equipment such as a multi meter.Solid knowledge base in use of personal computers.Attention to detail.Good communication and listening skills.#TechHiring

Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits,visit ABM 2024 Employee Benefits| Front Line Team Members | (Programa de Beneficios de ABM) ElectricianData Center-1st Shift Monday-Friday (7am-3pm)Job Descriptions The Data Center Electrician is responsible for the operations of the Data Center power infrastructure.This includes but not limited to:Managing all power planning, layouts to data cabinets.Testing, installing and managing the capacity on the power strips and its associated breaker within the data cabinet.Testing and powering up receptacles under a four foot raised floor. Regularly required to stoop, kneel, crouch, or crawl under the four foot raised floor.Working with facilities to insure all servers/devices have the correct cooling design, correct temperatures at the cabinet are meet.Work with Facilities to maintain and document all new power and installs associated with it. This includes the use of computer based programs like Microsoft Word, Excel, Nlyte (data center infrastructure management) etc. Responsible for the operation and maintaining electrical and mechanical equipment within the data center.It may also include troubleshooting electrical problems, restoring power when failures occur. Operating electrical breakers and distribution gear including UPS, ATS, and generators as need.Installing and maintain lighting and controls for lighting.Small projects that include installing conduit and wiring.Responsible to respond to customer requests, submit and close work orders, and perform other duties as assigned.Knowledge, Skills, and AbilitiesGraduate of applicable Electrical Technical School such as the IBEW Joint Apprenticeship ProgramMilitary equivalent and two years minimum same or similar work experience.High school education or equivalent and three years minimum same or similar work experience.Minimum of Five years’ work experienceStrong knowledge of the National Electrical Code and various industry standards, such as OSHA and NFPA.Attention to detail with good organizational capabilities.Ability to prioritize with good time management skills.Can work independently and consistently achieve results.Communicate effectively, writing and verbally, with clients and peers.Willing to work flexible hours, weekends, holidays and some night work.Regularly required to stoop, kneel, crouch, or crawl under a four foot raised floor.#300

POSITION PURPOSE The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. DUTIES, TASKS, AND RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized job site.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. CRITICAL SKILLS & KNOWLEDGE Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manuals, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Obtain apprentice licensing in appropriate states. WORKING CONDITIONS Exposure to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity is sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out-of-town/out-of-state projects This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor.EducationRequiredHigh School or betterLicenses & CertificationsRequiredValid Driver's License

What this job involves -The Maintenance Technician supports operation, inspection, and maintenance processes to mechanical, electrical, plumbing and kitchen equipment and systems in assigned facilities. Assists Mobile Engineers (HVAC/R) and Control Systems Technicians in maintenance and repair efforts, as well as independently performing defined tasks.What is your day to day Assist the operations team in the maintenance and repair of building and equipmentGeneral interior maintenance – HVAC/R coil cleaning, evaporator coil cleaning, kitchen equipment maintenance (meat grinder, cuber, meat saw, slicers, etc.).Minor plumbing repairsMaintain lighting system bulbs and ballastsCompletes special tasks that include but are not limited to; painting, locksmith work, tenant services requests, and general maintenance as assigned.This position requires the employee to be on call for after-hours emergencies.Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Participate in ongoing technical, safety, and operational process training programsDocuments work performance and materials procurement as directed.Desired experience and technical skillsRequired:High school diploma or GED equivalentClass B UST CertificationCandidate must possess and maintain a valid state driver’s license.Completion of an applicable technical training program is desirable, have a minimum of one (1) year of applicable working experience in general building repair and maintenance, basic plumbing, and basic electrical.Must have ability to lift a minimum of 80 lbs., use ladders up to 30 ft, and possess mechanical and electrical aptitude.Must pass background, drug/alcohol, and MVR screening process.Experience and technical skills Preferred:Ability to comply with both Jones Lang LaSalle and client-directed Policies & Procedures.Successful candidate must be a self-motivated individual who can work independently or in a team environment.#HVACjobs#MHVACjobs

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HAS)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Responsible for meeting customer expectations while performing quality inspections.How you will do it:Perform routine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.Work with low voltage wiring and associated devices for the operation of low voltage equipment.Learn to complete Service Acknowledgements with proper coding through communication devices, such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documentation program via the laptop computer.Make minor repairs and programming changes while under the direct authorized supervision.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredHigh School Diploma or equivalent required.3-5 years documented experience in sprinkler systems preferredAble to obtain and retain any licenses that are required by National, State and Local codes.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Experience with wet, dry, pre-action, deluge, fire pumps, and foam systemsDemonstrates an aptitude for troubleshooting systems and performing necessary repairs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Willing to travel out of town including overnight lodging.Demonstrate a high level of customer service.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.PreferredRepair experienceBackflow certificationNICET Level 2 certification in water based systems.

What this job involvesOperates, inspects, and maintains all HVAC, mechanical, electrical and plumbing equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc.What is your day to day Performance of ongoing preventive and repair response work orders on facility mechanical, electrical, and other installed systems, equipment, and other components.Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned buildings.Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations.Respond effectively to all emergencies.Prepare and submit to management summary reports listing conditions found in the performance of assigned work, and recommend and/or suggest action to be taken.Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in every day activities. This to include building automation systems, fire / life safety systems, and any other building related equipment.Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Maintain compliance to State, County, or City Ordinances, Codes, or Laws.Must be willing and able to support any after hours building related activity as required.Attend periodic training seminars.Other assigned operational tasks as may be typically expected of the Mobile Engineer role.Candidate will be provided tools required to perform assigned work scope.Desired experience and technical skillsRequiredUniversal EPA 608 CertificationMinimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of packaged HVAC, plumbing electrical equipment repair and maintenance.Candidate must possess and maintain a valid state driver’s licenseMust be able to lift up to 80 lbs. and climb up to 30 ft. ladders.Ability to perform on call duties and overtime as required.PreferredKnowledge of overall MEP/HVAC system design and application.Experience managing work orders, utilizing CMMS technologyExperience working in a service-related role, specific to commercial facilities.#HVACjobs

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramTuition ReimbursementUnlimited Career PathWellness ProgramAnd More!What you will doInspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Suppression life safety product lines as well as similar competitive manufacturers’ product lines.How you will do itWork with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look forFire alarm license1 to 2 years documented service experience in fire alarm or fire sprinkler.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Able to obtain and retain any licenses that are required by National, State and Local codes.Successful completion of the Inspector Entre Course (Electrical or Sprinkler).Possess a valid driver’s license and driving record that meets company requirements.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.PreferredSpecial Hazards experienceFire pump experienceService backgroundNICET Level II certificationBackflow LicenseFamiliarity with sprinkler systems and extinguishers