We are looking for Flaggers to join our team!
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Business Unit Description: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: SUMMARY: DAYS AND NIGHT SHIFT POSITION AVAILABLE. 6m-630pm or 6p-6:30a 2-2-3 SCHEDULELooking to Hire experienced electrical/E&I/Automation technicians for our West Jefferson location. Let us show you why we are first in food because we are first in people.This position has the responsibility to comply with safety work rules at all times as well as an obligation to reinforce safety as a core value. Ensures that all policies, procedures and activities, related to food safety & quality, are followed and complied with uniformly, in an effort to reduce product and process variability.The techincian position is responsible for ensuring the equipment productivity and efficiency through troubleshooting, preventive maintenance, corrective maintenance, and monitoring.Tetra Pak or Evergreen experience is highly desired!Automation, electro mechanical, electrical, or E&I experience is recommended.Compensation is above market average for locale. We offer relocation and other competitive benefits.#FirstinpeopleACITIVITIES: Assumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job’s duties/tasks. Adheres to safe work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately. Attends and actively participates in safety meetings/trainings.Ensures regulatory compliance at all times.Complete preventative maintenance requirements on all equipment.Monitor efficiency of all equipment and troubleshoot when necessary.Remove or replace defective parts by dismantling and reassembling equipment.Adjust all necessary components of equipment as needed.Repair and adjust all doors as needed.Must adhere to budget, USDA, OSHA, SQF, and FDA compliance guidelines.Perform other duties as assigned. Qualifications: EDUCATION: High school diploma or general education degree (GED) or equivalent.LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations.MATHEMATICAL SKILLS:Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume and distance.REASONING ABILITY:Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.LICENSES, CERTIFICATES, REGISTRATIONS:Examples of licenses, certificates, and registrations required:Power Industrial Truck Operator’s LicenseBlack Seal License is a plus.OTHER SKILLS AND ABILITIES:Specific skills and abilities required that are not included in other sections:Ability to function in a teamwork environment.Must be well-organized.Must be detail oriented.Ability to plan and prioritize activity.Ability to comply with all safety rules and regulations.Basic computer skills.Ability to work safely with chemicals

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HAS)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Responsible for meeting customer expectations while performing quality inspections.How you will do it:Perform routine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.Work with low voltage wiring and associated devices for the operation of low voltage equipment.Learn to complete Service Acknowledgements with proper coding through communication devices, such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documentation program via the laptop computer.Make minor repairs and programming changes while under the direct authorized supervision.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredHigh School Diploma or equivalent required.3-5 years documented experience in sprinkler systems preferredAble to obtain and retain any licenses that are required by National, State and Local codes.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Experience with wet, dry, pre-action, deluge, fire pumps, and foam systemsDemonstrates an aptitude for troubleshooting systems and performing necessary repairs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Willing to travel out of town including overnight lodging.Demonstrate a high level of customer service.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.PreferredRepair experienceBackflow certificationNICET Level 2 certification in water based systems.

Equipment Service TechnicianLocation:Marysville Auto Plant in OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekendmaintenancerepair and PM activities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation$5,000 Sign-on BonusHourly rate starting between $33.65- $38.451.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Location: Marysville, OhioWorkstyle: OnsiteWage: $34.65 - $39.60$5,000 sign on bonus & Relocation assistance outside 50miles.About this Position: This position is within the Facilities department within Honda Development & Manufacturing of America, LLC’s (HDMA). The Facilities department is responsible for the building which includes new construction, remodels, utility management (electric, compressed air, natural gas, water), building maintenance, end of life equipment replacements and upgrades. The goal of the department is to create a facility that we are proud of and serve our customers.Role Description:Work on a team to perform facilities equipment preventative maintenance, repairs, improvements, and reporting, to maintain a high level of customer service in building, equipment, and utility operations. Continuously develop associate skills through Honda maintenance training program and find ways of introducing technologies and efficiency improvements.Responsibilities include:Complete preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical, HVAC, and building controls). Perform daily assigned work order tasks and communicate any follow-up neededEvaluates and recommends equipment improvements to improve availability, capability, and yield. Suggest and revise PM's to properly maintain facilities equipmentPerforms equipment failure analysis (including preventative and unscheduled maintenance). Troubleshoots and diagnose equipment problems. Participate in a reliability centered maintenance program for equipment. Participate in team activities to develop and maintain long term equipment reliability. Support total equipment management through daily and proactive activities to improve operations, promoting business targets and objectives.Provide mentorship and teambuilding through work habits, communication and the sharing of knowledge and expertise. Expand and maintain technical expertise through formal and on-the-job training opportunities. Support and engage in activities that drive new ideas, leveraging new technology, new methods and approaches to positively impact HAM’s competitiveness.Who we are seeking: Required Work Experience:Desired: 3 years of experience in a Facilities environment (industrial, or heavy commercial)Will consider well qualified entry level candidates Required Education:Completion of 2 year technical degree or equivalent equipment service experienceDesired skills:Working knowledge of Facilities low and medium voltage electrical equipment (including substations, switches, cable, starters, VFDs, MCC, breakers, bus duct) and Building Management Systems.Ability to troubleshoot mechanical equipment, such as HVAC, Refrigeration, Air Compressors, Air Dryers, Boilers, Cooling Towers, Pumps, Plumbing & Piping.Good written and verbal communication skills with the ability to clearly express ideasComply with Honda Health and Safety PoliciesMinimum computer (Word, PowerPoint, Excel) Self-motivated, creative thinking, and a positive attitude, continuous improvement and customer service drivenMust use time effectively & prevent irrelevant issues or distractions from interfering with work completion.Demonstrate the ability to plan/prioritize work assignments, submit schedules, set clear milestones & completion dates.Demonstrate the ability to collect & analyze pertinent data, identify root cause, and develop effective countermeasures.Additional Position Factors:Workstyle: OnsiteTravel: 5% At Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda. Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment. We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and make us an employer of choice Total Rewards:Competitive base salary Annual BonusIndustry leading Benefit Plans (Medical, Dental, Vision)Paid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement opportunitiesCareer mobility Education reimbursement for continued learningTraining and Development programs Additional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Req ID:449219Address: 1301 N Warpole St Upper Sandusky, OH, 43351Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

ABM has a great Building Engineer role for a Data Center. This is a full-time role is operating and maintaining equipment associated with electrical and mechanical operations, safe and proper operation of life safety equipment for a 2nd shift 3pm- 11pm Wednesday-Sunday schedule. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits,visit ABM 2024 Employee Benefits| Front Line Team Members | (Programa de Beneficios de ABM) Building Engineer (Data Center)-2nd shift 3pm-11pm Wednesday-Sunday schedule.Job Descriptions Operates, inspects, and maintains electrical and mechanical equipment. It may also include troubleshooting electrical problems, restoring power when failures occur. Operating electrical breakers and distribution gear including UPS, ATS, and generators as need. Installing and maintain lighting and controls for lighting. Small projects that include installing conduit and wiring.Other responsibilities the electrician will be trained on includes operating, maintaining and repairing equipment associated with HVAC, chilled water system and mechanical operations. Safe and proper operation of life safety equipment and minor plumbing. Responsible to respond to customer requests, submit and close work orders, and perform other duties as assigned.Responsibilities include operating and maintaining equipment associated with electrical and mechanical operations, safe and proper operation of life safety equipment and minor plumbing. Responsible to respond to customer requests, submit and close work orders, and perform other duties as assigned.· Ability to perform all work using the proper personnel protective equipment (PPE).· In strict accordance, ability to perform all applicable safety policies, procedures, and practices.· Attention to detail with good organizational capabilities.· Ability to prioritize with good time management skills.· Can work independently and consistently achieve results.· Communicate effectively, writing and verbally, with clients and peers.· Willing to work flexible hours, weekends, holidays· Ability to lift and move 50 lbs. of equipment; work on platforms, ladders and under a raised floor Military and veteran friendly employer, veterans and candidates with military experience encouraged to apply #300

Hepaco, A Clean Harbors Company in Groveport, OH is seeking a Field Service Admin (Field Service Rep)to support the field office handling all branch related accounts and administrative obligations. Hepaco, A Clean HarborsCompany is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, A Clean Harbors Company Health and Safety is our #1 priority and we live it 3-6-5Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursement. Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safemannerEnsure that customer, vendors and employees are handled in a professional and courteous mannerReviews corporate card reconciliations for accuracyReconcile employee payroll punches to worksheets on a daily basis; administers weekly payroll, payroll adjustments and exception reportsPrepare ad hoc reports for branch and/regional personnel as neededProvide administrative support for the branch officeEnsure proper setup and usage of vendorsCreate appropriate cost to branch and job-related purchase ordersAssure daily billing of the business with expectation that billing is accomplished each day and is consistent each week and respond in a timely manner to all billing issues/questions on unbilled reportsComplete and submit short pay and credit rebill requestsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedAdministrative experienceProficiency in Microsoft OfficeCommunication skillsAbility to handle multiple taskssimultaneously.Perform physical functions per jobrequirements.Successfully complete a background check, drug test, and physical, by position Preferred Qualifications: Experience in construction, manufacturing, or a similar environment

$23.00/hourSalary is determined by the applicant’s experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.Immediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. ColumbusOhioUnited States of America

POSITION PURPOSE The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. DUTIES, TASKS, AND RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized job site.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. CRITICAL SKILLS & KNOWLEDGE Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manuals, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Obtain apprentice licensing in appropriate states. WORKING CONDITIONS Exposure to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity is sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out-of-town/out-of-state projects This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor.EducationRequiredHigh School or betterLicenses & CertificationsRequiredValid Driver's License

What this job involves -The Maintenance Technician supports operation, inspection, and maintenance processes to mechanical, electrical, plumbing and kitchen equipment and systems in assigned facilities. Assists Mobile Engineers (HVAC/R) and Control Systems Technicians in maintenance and repair efforts, as well as independently performing defined tasks.What is your day to day Assist the operations team in the maintenance and repair of building and equipmentGeneral interior maintenance – HVAC/R coil cleaning, evaporator coil cleaning, kitchen equipment maintenance (meat grinder, cuber, meat saw, slicers, etc.).Minor plumbing repairsMaintain lighting system bulbs and ballastsCompletes special tasks that include but are not limited to; painting, locksmith work, tenant services requests, and general maintenance as assigned.This position requires the employee to be on call for after-hours emergencies.Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Participate in ongoing technical, safety, and operational process training programsDocuments work performance and materials procurement as directed.Desired experience and technical skillsRequired:High school diploma or GED equivalentClass B UST CertificationCandidate must possess and maintain a valid state driver’s license.Completion of an applicable technical training program is desirable, have a minimum of one (1) year of applicable working experience in general building repair and maintenance, basic plumbing, and basic electrical.Must have ability to lift a minimum of 80 lbs., use ladders up to 30 ft, and possess mechanical and electrical aptitude.Must pass background, drug/alcohol, and MVR screening process.Experience and technical skills Preferred:Ability to comply with both Jones Lang LaSalle and client-directed Policies & Procedures.Successful candidate must be a self-motivated individual who can work independently or in a team environment.#HVACjobs#MHVACjobs

Expand your career possibilities.Thank you for dedicating your time and talent to Lowe’s. We want to give you more opportunities to learn and grow, so if you find a position you’re interested in below, we encourage you to apply!Find Your Home to More Possibilities.What you will doMaintains appropriate certification as required by state and local regulationsDetermines safety precautions and requirements for taskPrepares worksite; performs lock-out/tag-outGathers tools and spare parts for taskUses tools safely; checks condition of tools prior to using; uses appropriate personal protective equipment (PPE)Evaluates condition of equipment; determines spare parts needed and repair effort required; recognizes potential for breakdown in near future and takes pre-emptive actionPlans work and executes taskMentors Maintenance Utility; uses these associates as assistant if appropriateSeeks assistance from a more experienced mechanic if neededLeaves worksite in good conditionTurns in unused spare partsDocuments condition of equipment as found, work performed, spare parts used, and any other applicable informationEnters data into 7I system (computerized maintenance management system); closes out work orders and Preventative Maintenance (PM) requestsInforms next shift of remaining workProvides status of incomplete tasks bridging the two shiftsDemonstrates positive and effective communications with maintenance customersServes as an expert in two of the following specialty areas: conveyors, rolling stock, or buildingWithin specialty areas: diagnoses, plans, and repairs complex equipment failures with minimal guidance from Maintenance Mechanic II and SupervisorsOutside of specialty areas: diagnoses, plans, and executes basic repairsAttends and participate in training as scheduled; continues to increase skill in his/her specialty area and learns and develops a working knowledge of the repair methods for the other work areas. These areas include the following maintenance systems:Conveyor systems, controls, and subsystems,Industrial Electrical Systems,Heating, Ventilation, Air Conditioning (HVAC),Fire Suppression systems,Welding and Fabrication,Plumbing and Carpentry (Physical plant-type construction and repairs),Fork Lift and Material Handling systems, including subsystems and components of the equipment,Preventive maintenance technologies;Note: Some states have specific regulations concerning this type of work, and those regulations will supersede the training noted here if applicableAdditional Duties and ResponsibilitiesPerforms additional tasks as assigned by Maintenance SupervisorProvides additional training to Maintenance Utility as requiredAssists with changing batteries in equipmentIndividual ContributorRequired Qualifications:High School or GED General Studies or technical school graduate and 1-2 Years 2 Years of Experience in her/his specialty area1-2 Years Combination of experience and/or technical training in electrical/electronic theory ranging up to 600 volts systems (or willingness to obtain appropriate training within 1 year of employment)DL NUMBER - Driver License, Valid and in State valid state driver’s licenseIf required by local regulations, certified to perform work at the Maintenance Mechanic level (such as electrical work in the state of Oregon)Preferred Qualifications:Experience and/or certification with welding and fabricationExperience operating various maintenance and operations vehicles and equipmentExperience reading blueprints, schematics, and other technical drawingsCertification for electrical work and/or high voltage workAbout Lowe’sLowe’s Companies, Inc. (NYSE: LOW) is a FORTUNE® 50 home improvement company serving approximately 16 million customer transactions a week in the United States. With total fiscal year 2023 sales of more than $86 billion, Lowe’s operates over 1,700 home improvement stores and employs approximately 300,000 associates. Based in Mooresville, N.C., Lowe’s supports the communities it serves through programs focused on creating safe, affordable housing and helping to develop the next generation of skilled trade experts. For more information, visit Lowes.com.Lowe’s is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law.

Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: This position is responsible for the management, training, scheduling and development of maintenance personnel providing support to the Production/Processing areas at the West Jefferson, OH facility. This newly constructed facility will produce protein drinks.Tetra Pak and Aseptic Equipment PreferredAssumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks.Supervision of maintenance crew.Production support in the Production / Processing areas.Creates work orders and PMs.Responsible for installing new equipment.Troubleshoots problems with equipment.Provides a safe work environment for employees.Recognizes and takes steps to resolve operating problems in order to minimize their impact on the operations.Cooperates with all departments to assure a coordinated work relationship exists at all times.Keeps accurate and up-to-date records (I.E. timecards, downtime records, absentee records, etc.)Enforces company policies in a fair and consistent manner.Encourages suggestions from employees which will improve production, quality, safety and/or control costs of production.Keeps manager informed on operating and/or employee problems which may require their attention or knowledge.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained.Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Responsible for Food Safety and Food Quality of MFI products.#firstinpeople Qualifications: Associate’s degree (AA) or two-year technical certificate in Mechanics and Electronics or a related field Two years of mechanical and electrical maintenance and supervisory experience; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.PREFERRED EDUCATION, EXPERIENCE AND SKILLS: Knowledge and experience supporting Aseptic filling operations. Tetra Pak experience a plus.Knowledge of basic mechanics, welding, electrical, fabrication, preventative maintenance, plant operations and government safety regulations.Able to supervise department personnel in a fair and consistent manner.Be able to recognize problem situations and take appropriate steps to resolve.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information in one-on-one and in group situations. Ability to respond to questions from internal/external customers/vendors at all levels including management.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables

Equipment Service Technician - VQDLocation:Marysville, OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technician responsible for maintaining of equipment. This includes responding to equipment emergency downtime, troubleshooting for root cause and repair as needed.Responsibilities include:Ability to troubleshoot and repair: Robots, Servo Systems, Electrical Systems, Automated Machinery and Mechanical SystemsInterpret electrical, mechanical, and hydraulic prints.Complete assigned work orders and support production members in achieving the lines run rate efficiency.Document daily (all) activity and information in Equipment Management Systems (Maximo)Support weekend preventative maintenance, repair, and plant shutdown activities as well as new equipment installations and equipment modificationsWho we are seeking:Required Work Experience:Preferred 3 months of relevant experience.Required Education:High School Diploma or Equivalent. Two-year degree (Electrical/Mechanical/Industrial) or equivalent equipment maintenance experienceDesired skills:Problem analysis skills, Robots, Servo Systems, Electrical Systems, Automated Machinery and Mechanical Systems, knowledge of Microsoft Office (Excel, Power Point, Word). Time managementAdditional Position Factors:Department Equipment Run TimeDepartment Delivery Run RateEfficiency AchievementPreventative Maintenance On-time CompletionOther Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation1.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits,visit ABM 2024 Employee Benefits| Front Line Team Members | (Programa de Beneficios de ABM) ElectricianData Center-1st Shift Monday-Friday (7am-3pm)Job Descriptions The Data Center Electrician is responsible for the operations of the Data Center power infrastructure.This includes but not limited to:Managing all power planning, layouts to data cabinets.Testing, installing and managing the capacity on the power strips and its associated breaker within the data cabinet.Testing and powering up receptacles under a four foot raised floor. Regularly required to stoop, kneel, crouch, or crawl under the four foot raised floor.Working with facilities to insure all servers/devices have the correct cooling design, correct temperatures at the cabinet are meet.Work with Facilities to maintain and document all new power and installs associated with it. This includes the use of computer based programs like Microsoft Word, Excel, Nlyte (data center infrastructure management) etc. Responsible for the operation and maintaining electrical and mechanical equipment within the data center.It may also include troubleshooting electrical problems, restoring power when failures occur. Operating electrical breakers and distribution gear including UPS, ATS, and generators as need.Installing and maintain lighting and controls for lighting.Small projects that include installing conduit and wiring.Responsible to respond to customer requests, submit and close work orders, and perform other duties as assigned.Knowledge, Skills, and AbilitiesGraduate of applicable Electrical Technical School such as the IBEW Joint Apprenticeship ProgramMilitary equivalent and two years minimum same or similar work experience.High school education or equivalent and three years minimum same or similar work experience.Minimum of Five years’ work experienceStrong knowledge of the National Electrical Code and various industry standards, such as OSHA and NFPA.Attention to detail with good organizational capabilities.Ability to prioritize with good time management skills.Can work independently and consistently achieve results.Communicate effectively, writing and verbally, with clients and peers.Willing to work flexible hours, weekends, holidays and some night work.Regularly required to stoop, kneel, crouch, or crawl under a four foot raised floor.#300

Clean Harbors Huber Heights, OHis looking for a Mobile Vehicle Mechanic to join their safety conscious team!This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area. Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesOpportunity for increase after 90 days!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings! Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times.Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as directed by management.Ability to perform thorough inspection of equipment and identify unsatisfactory condition.Full compliance with mandatory PPE requirements during all work-related activities and tasksTravel to other locations to perform repairs and maintenance on equipment as required.Completes and submits all associated paperwork as required for tracking PM schedules.Maintain active light duty or DQ driver status as per mobile vehicle type.Performs other duties and tasks as assigned from time to time by management. What does it take to work for Clean Harbors High School diploma or equivalent required.Valid driver's license and clean driving record.3+ years prior experience working on heavy duty-trucks and equipment.Must be able to provide own basic tools.Willingness to travel within assigned territory up to 70%.Attention to detail.Strong communication skills.Ability to work flexible shifts including nights, weekends, and overtime as required.Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed.Ability to pass a background, drug, and physical test upon hire. 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company for Women to Work for in Transportation” *CH #LI-KB1

$24.00/hourShift Premium may ApplyImmediately hiring! Are you a diligent and meticulous individual with expertise in automotive repair If you have experience working in an auto garage or car dealership, we want you to join the Avis Budget Group enterprise!What You’ll Do:You’ll perform standard and complex repairs, including warranty, on a wide variety of auto makes and models with no technical supervision, including the diagnosis and repair of engines, transmissions, exhaust, brakes, electrical, air conditioning and computer systems. You may also act as a technical expert to other technicians in the shop.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training in our vehicle makes and modelsPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s LicenseMinimum 3 years of auto repair experience, holding 3 ASE (ability to acquire 2 additional ASE certificates within first year)Knowledgeable in the following areas covered by the ASE certification programs, including but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are:Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.The fine print: Avis Budget Group is an equal opportunity employer – M/F/Veterans/Disabled.This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group.ColumbusOhioUnited States of America

POSITION PURPOSE The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. DUTIES, TASKS, AND RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized job site.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. CRITICAL SKILLS & KNOWLEDGE Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manuals, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Obtain apprentice licensing in appropriate states. WORKING CONDITIONS Exposure to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity is sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out-of-town/out-of-state projects This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor.EducationRequiredHigh School or betterLicenses & CertificationsRequiredValid Driver's License

What this job involvesOperates, inspects, and maintains all HVAC, mechanical, electrical and plumbing equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc.What is your day to day Performance of ongoing preventive and repair response work orders on facility mechanical, electrical, and other installed systems, equipment, and other components.Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned buildings.Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations.Respond effectively to all emergencies.Prepare and submit to management summary reports listing conditions found in the performance of assigned work, and recommend and/or suggest action to be taken.Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in every day activities. This to include building automation systems, fire / life safety systems, and any other building related equipment.Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Maintain compliance to State, County, or City Ordinances, Codes, or Laws.Must be willing and able to support any after hours building related activity as required.Attend periodic training seminars.Other assigned operational tasks as may be typically expected of the Mobile Engineer role.Candidate will be provided tools required to perform assigned work scope.Desired experience and technical skillsRequiredUniversal EPA 608 CertificationMinimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of packaged HVAC, plumbing electrical equipment repair and maintenance.Candidate must possess and maintain a valid state driver’s licenseMust be able to lift up to 80 lbs. and climb up to 30 ft. ladders.Ability to perform on call duties and overtime as required.PreferredKnowledge of overall MEP/HVAC system design and application.Experience managing work orders, utilizing CMMS technologyExperience working in a service-related role, specific to commercial facilities.#HVACjobs

Equipment Service TechnicianLocation:East Liberty, OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekendmaintenancerepair and PM activities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation$5,000 Sign-on BonusHourly rate starting between $33.65- $38.451.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Clean Harbors in Groveport, OH is seeking a Field Service Project Manager to plan, lead, organize and coordinate the daily operations of the service line crew. This includes responsibility over proper operation of equipment, driving operational efficiencies at the work site and ensuring accurate documentation related to the job is completed in a timely fashion. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5! Focus on maintaining sustainability and cleaning the Earth Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Company paid training and tuition reimbursement Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerRead work order and ensures all required equipment is available and operational prior to starting jobsInspects equipment and general work area prior to starting any jobCorrect deficiencies that may cause accidents, injuries, lost productivity or harm to equipment or that are inconsistent with client's requirementsCommunicate Performs preventative and corrective maintenance on equipment when requiredCompletes all appropriate paperwork including service receipts, and submits to designated managementTrain Technicians I and II in equipment operation and service line processesOperate all necessary equipment in service line in accordance with operation training and safety proceduresPractice safety procedures in accordance with training and guidelines when workingProvide industrial services using appropriate techniques including handwork or manual work in accordance with established methods and applicable regulationsManually cleans, installs, fits, repairs valves, caps, hoses, pumps, gaskets and all other external and internal equipment on projectsUnderstanding of equipment maintenance and ability to perform maintenance utilizing supplied breathing air and applicable personal protective equipmentMaintain good housekeeping and cleanliness in the cleaning areasCheck equipment at the start of each shiftLead safety meeting and ensure HPC safety policies are followedMeet progress deadlines and efficiently utilizes resourcesInstruct, provide feedback and direct and assist crew in performance of job duties to complete work in accordance with client requirements and Company policies, practices and proceduresEnforce Company employee policies and may remove employee from job when requiredFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsEnvironmental field service operations, construction, manufacturing, or similar industry experienceAbility to travel overnight up to 2-4 nights per monthAbility to be on-call for emergency response situationsAbility to pull a trailer via pick-up truck preferredAbility to interface with clients and managementAbility to manage project related vendorsAbility to manage, reconcile, and review all job-related documentationAbility to work in confined spaces for periods of timeValid Driver’s licensePerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by position Preferred Qualifications: Experience in industrial emergency response, Hazmat clean-up, confined space entrySupervising/working in confined spaces Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class. Clean Harbors is a Military & Veteran friendly company. *CH

Equipment Service TechnicianLocation: Russells Point, OhioStarting Pay -$34.65 - $39.60 hourly& $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Repair and maintain equipment and support daily production. Respond to breakdowns and calls to keep production running. Support weekendmaintenancerepair and PM activities when necessary. Support areliability-centered maintenance program. Support team activities and contribute your own ideas.Responsibilities include:Support department in achieving daily production targets.Perform daily equipment inspections/checks for abnormal situations.Document daily equipment-related activities.Suggest and implement approval ideas that reduce repeat or potential downtime.Support weekend and plant shutdown activities.Preventative maintenance and continuous improvement of equipment and tools as required in order to guarantee safety, quality, and delivery targets.Equipment modifications as required to support business plan initiatives, new model requirements, or other retooling requirements.Daily Tasks:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Who we are seeking:Required Work Experience:Minimum of three months of relevant experience in a manufacturing environment with a 2-year technical degree or a minimum of two years of relevant experience if no degree.Required Education:High School Diploma or equivalentDesired skills:Daily reporting and tracking of activities.Plan, Do Check, Action follow-up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Honda Factors:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime, and off shifts as needed.Willingness to travel (percentage of travel varies between roles)Additional Position Factors:Workstyle: OnsiteTravel: 5%At Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation, and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda.Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment.We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and makes us an employer of choice Total Rewards:Competitive base salaryAnnual BonusIndustry-leading Benefit Plans (Medical, Dental, Vision)Paid time off, including vacation, paid holidays, sick time, and personal days401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement opportunitiesCareer mobilityEducation reimbursement for continued learningTraining and Development programsAdditional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.