FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Your first step to an amazing career in Research and Development (R&D) at Procter and Gamble (P&G) starts with applying to this job.Associate Researcher is an entry level role for individuals who are competent in basic science and math and are inspired to apply those skills towards hands-on experiments. At P&G, a wide variety of R&D work is available to Associate Researchers, in the following major areas:Products ResearchDeeply understand our consumers and their needs to inform product design parameters for new or improved products.Product Formulation & DesignTranslates consumer needs into finished products that delight consumers using the best available technologies/chemicals/materials.AnalyticalUse lab equipment to solve tough technical problems via chemical, physical, mechanical, imaging, and other measurement capabilities.Packaging & Device DevelopmentCreates and improves packages and devices that delight consumers and retailers.Process Development & Pilot Plant OperationsTranslates ideas, concepts, and technologies into commercially feasible chemical and mechanical processes and scales them up from lab to pilot plant to manufacturing.So, when you apply, be sure to answer the questions to let us know which areas you have experience and which areas you are interested in.Though the type of work may vary, all Associate Researcher roles will provide competitive wages as well as the opportunity for you to do meaningful work from Day 1. You will work on current and future products and should have the curiosity to think of improved approaches to everyday problems. Of course, we will provide you the training needed for you to make an impact on Day 1 and beyond, because when you start a job at P&G, it can also be the start of yourP&G career filled with professional growth and new opportunities.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Salary Full-Time Function: Engineering Req ID:26163 SummaryLincoln Electric is seeking an Electrical Project Engineer to join our team at the Fort Loramie Automation site. This position plays a critical role in managing and executing the engineering processes that drive the design, development, production, and service of Lincoln Electric’s state-of-the-art automation equipment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more.What You Will Do: As an Electrical Project Engineer, you will support the design and development of Lincoln Automation equipment for automotive, aerospace, appliance and energy industries. Your key responsibilities will include:Project Leadership & Coordination: Assist in defining project timelines, resource requirements, and staffing needs. Lead cross-functional teams, ensuring timely delivery of project milestones and adherence to financial targets (labor and material costs).Engineering Design & System Integration: Work closely with mechanical, electrical, pneumatic, and hydraulic engineers to drive the design of complex automation systems. Lead the creation and troubleshooting of control systems including PLC, Safety PLC, HMI, servo motion, and robot programming.Troubleshooting & Debugging: Guide teams in the development and resolution of issues. Oversee start-up, debugging, and final system maturation to ensure systems meet customer specifications and performance standards.Budget & Cost Management: Lead the effort in maintaining project budgets, ensuring efficient use of resources and alignment with financial expectations. Work with procurement teams to identify cost-effective suppliers and establish purchasing strategies.Onsite Support & Commissioning: Manage onsite installation activities, assist with equipment commissioning, and ensure successful system integration. Resolve any customer payment issues as required upon project completion.Documentation & Standardization: Coordinate compiling operator and maintenance manuals. Assist in developing and maintaining engineering and product standards to ensure consistency and high-quality deliverables. Ensure compliance with ISO documentation standards for projects.Team Development & Mentorship: Provide guidance and mentorship to junior engineers, ensuring their technical development. Assist in team performance evaluations, fostering a collaborative, high-performance culture.Education and Experience RequiredEducation: A technical degree in Electrical Engineering or a related field is highly desired.Experience: A minimum of 10+ years of hands-on experience in industrial automation design and engineering. Proven expertise in working with PLC/HMI systems, robot programming, control systems, network & fieldbus systems, and safety systems.Experience with electrical schematic creation and design using AutoCAD Electrical (preferred).Demonstrated leadership and project management experience, including working with machine builders, management teams, and cross-functional support functions.Ability to travel ~25%Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationAnna, OhioJob PurposeThe Electrical Controls Design role provides high quality, reasonably priced, on-time hardware, software, and safety design solutions to ensure stable new model and new technology introduction in all HDMA North American manufacturing facilities.Key AccountabilitiesWork in an engineering team atmosphere understand design requirements to create/modify automated production equipment.Provide electrical design to produce engineering hardware data to assemble/build, and wire a control system for production equipmentProvide electrical design to produce engineering software data to accomplish the control task for production equipment processes. (i.e. PLC, HMI, Motion Control, and Robotic programming).Provide on-site support to install, system up, and mature the control system for production equipment.Create and maintain a critical path schedule, determine resources, and manage resources to produce the control system design deliverables to achieve the overall project milestones for medium to large projects/ medium to high complexity.Provide direct mentorship to Associate Engineers in role on a 1:1 or 1:2 ratio where technical knowledge transfer occurs to foster growth in other individual contributorsProvide Project Leadership for equipment controls design for North America new model for an entire plant or new machine. Provide Plan versus actual reporting on QCDMS requirements and propose countermeasures to gaps encountered.Lead and attend design reviews to ensure design standards are achieved and design meets specification requirements for control system design deliverables for self and project team members. (peer reviews and mentee reviews)Qualifications, Experience, and Skills4-year Bachelor of Science degree in Electrical Engineering or 2-year Electrical related degree with 4 years’ experience.2-8 years in Electrical/Controls Engineering on automated production equipment. (depends on educational background)Knowledge of machine safety regulations. Knowledge of NEC/NFPA 79 standards. Servo position control experience. Robotic integration experience. Field I/O networking experience. Project management capabilities. Basic background in automated equipment electrical hardware/software design. Knowledge of PLC and HMI hardware and software functions.Workstyle75% Office environment - Design. 25% Manufacturing floor - Debug/Install.Must be willing to conduct physical confirmations in the manufacturing environment and conduct testing/debug on the manufacturing floor and/or at vendor sitesTravel up to 20% (North American Manufacturing Plants)Average work week is 45~48 hours (some weekends and 1 week shutdowns twice per year)What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeLead, create, and implement innovative technical activities and solutions in the areas of Mass Production, Business Plan and New Model to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost, and Morale characteristic targets.Key AccountabilitiesEffectively communicate upstream and downstream to all levels of the organization to assure common understanding and direction. Review and analyze daily report(s) to identify safety, quality, delivery gaps and develop potential countermeasures and /or root cause analysis opportunities striving for continuous improvement. Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems. Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense. Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding. Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives. Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement. Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency. Develop and manage investment and expense budgets to achieve overall cost targets. Qualifications, Experience, and SkillsMinimum Educational Qualifications Bachelors or Associates degree in Engineering or Engineering Technology with relevant experience (Mechanical, Manufacturing, Industrial or Electrical, etc) with interest in Manufacturing, if no degree 6 years of experience requiredMinimum Experience Mfg. co-op experience preferred but not requiredOther Job-Specific Skills Computer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilitiesDemonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsJob DimensionsNo. of Direct Reports 0No. of Indirect Reports 0Financial Dimensions Responsible for justification and evaluation material for projectsDecisions ExpectedFollow-up on daily line performance and countermeasure areas of concernDevelop / Design strategy to achieve unit and company initiativeLead and evaluate business planning (Justification for resource changes)Determine budget and schedule activity needed to improve operationsWorking ConditionsWork in production environment requiring PPE and lockout in manufacturing operationsManufacturing environment with the potential of working near hydraulic oils, cutting lubricants, ferrous and aluminum materialsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, automation equipment, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per week possiblePossible weekend or off-shift support as necessaryTravel 5% (domestic & international)Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Hourly Full-Time Function: Engineering Pay Range: $30.00 - $36.00 Target Bonus: 5.0% Req ID:26270 SummaryLincoln Electric Automation has an outstanding opportunity for a Mechanical Design Engineer. The Mechanical Design Engineer plays a key role supporting our team in the design, building, shipping, and service of Lincon Electric Automation products. A Mechanical Designer II typically works on one project at a time (typically creating new designs that are very close to reference designs) and is working under the direction of a Mechanical Designer or Project Engineer.In addition to competitive pay, Lincoln Electric offers an annual incentive plan, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoThe Mechanical Design Engineer will be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives with a focus on design and development. In addition you will:• Understand and gain knowledge needed to work in software systems. i.e. Solidworks • Provide mechanical layouts and details to production • Take initiative to meet challenging project timelines and budgets (hours and material) • Ensure required ISO documentation is completed • Assist in compiling electronic documentation for Service Manuals, updating design package to reflect status configuration of any critical item • Assure that product, as designed, is in conformance with quote and customer purchase order • Work well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functions • Provide small-scale mechanical layouts and detail prints to production • Assumes additional responsibilities and performs special projects in support of the Company’s 2025 Strategy • May support other roles as a cross-training opportunityEducation & Experience Requirements • Mechanical Engineer or Mechanical Engineering Technology degree required• 2 plus years of experience in manufacturing and design of industrial automated equipment desired • CAD (3D modeling) desired • Computer proficiency including spreadsheet, word processing and project softwareNonessential skills and experience: • Safety (OSHA STDS)Environmental, Health & Safety (EH&S): • Understand the Company’s EHS Policy and how it relates to this job • Be aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this job • Work in a safe and environmentally friendly manner and observe all company EHS procedures • Know that the company EHS procedures are located on the ISO drive • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures • Attend required EHS trainingPhysical demands and work environment: • Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. • Work environment: The noise level in the work environment is usually moderate.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationAnna, OhioJob PurposeWork as part of a multi-discipline team to introduce and implement equipment required for new model introduction into Honda facilities. By leveraging 3D CAD software and simulation tools, they will need to identify key change points and summarize into a specification that fixes design requirements. This individual will be asked to drive forward projects and activity as functional Project Leader, PIC, or Subject Matter Expert, from inception through the handoff to final design/assy. They will be asked to focus on characteristic improvements, which align with the Business Unit strategy and regional goals. They will be asked to collaborate with the design team and plant members in order to achieve required quality, cost, and safety criteria.Key AccountabilitiesDevelopment of optimal machine concepts for any process characteristic change; by utilizing fundamentally sound engineering principlesLead and drive forward projects as Process Leader or subject matter expert. This includes receiving and linking directly to development (DO) and standards (MSS) functionsFunctionally act as direct project leaders for small/midsized business plan projects, driving forward the project from an engineering perspectivePerform detailed process studies of new model car part to understand machine capability, feeding back issues to car part designers as needed.Creation of Specification documentation to summarize changepoints, establish criteria and process/part flowOnline support during the installation phase of the project, linked to verifying spec criteriaCreate and maintain a critical path schedule to maintain overall project milestonesQualifications, Experience, and Skills4-year Bachelor of Science degree in Mechanical or Industrial Engineering or 2-year Engineering degree with related experience.4 years of Engineering experience linked to equipment concept/design/support or other production related fieldKnowledge of 3D CAD systems and softwareBackground in automated equipment developmentExcellent technical communication skills (both written and oral)Workstyle85% Office environment – creation of specification documentation. 15% Manufacturing floor – direct line side investigation / system-up support / verification at any Honda facilityMust be willing to travel locally, regional, and internationally as required on a project basis (to Honda facilities or external equipment vendors).What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationRussell's Point, OHJob PurposeThis position is not eligible for sponsorshipMechanical/Electrical/Controls Engineer responsible for planning, implementation, and standardization of building controls utilizing self, team, and contractor abilities. Direct site building control related activities, through team members and contractors, to meet site needs (e.g. controls upgrade and replacements, programming optimization, standardization, and operations enhancements). Ensures controls architecture consistency between sites and analyses technology trends.Project Engineer with capabilities to implement and communicate an operational plan for completing a project, monitor progress and performance against the project plan; resolve operational problems, minimize delays, identify, develop and gather necessary resources to complete the project. Design systems, develop schedules, budget and forecasts, select materials, equipment, project staff and contractors.Key AccountabilitiesManage BMS (Building Management System) specification, design, and operation. Develop and implement multiyear strategy to complete BMS migration. Collaborate with HDMA Facilities controls leaders to standardize a unified approach. Manage and oversee programming and work with IT networking team to optimize network and manage server applications. Direct and collaborate with the site representatives to ensure consistency and optimal system performance. Present updates and core functionality to leaders. Manage periodic updates and maintenance of system. Manage submission of yearly planning requirement documentation and create the planning documents for budgeting and approval events. Create roles and responsibility documents for quick reference and management of change. Support FAC Operations with mechanical/electrical/controls design and specification. Apply analytical and trouble shooting skills to minimize mean time to recovery. Support operation of Facilities mechanical systems including but not limited to centrifugal fans, burners, cooling/heating coils, pumps, centrifugal air compressors, centrifugal chillers, heat exchangers, utilities, metering, communications. Manage and maintain documentation for the site controls systems. Communicate critical updates to site system operators. Train FAC Associates on enhancements to operations related to controls and mechanical/electrical systems. Provide support on an as-needed basis. Ensure reference documentation is available and easily accessed. Create scope documents based on unit/department project requirements. Manage and/or support the bidding, evaluation, and selection process of contractors for the design and construction of Facilities and department led projects. Create project budgets and ensure accuracy; supervise engineers and on-site contractors. Determine and prioritize project tasks and develop project schedule and timelines in order to achieve project's final goals on time and within budget.Qualifications, Experience, and SkillsBachelor’s degree in Mechanical/Electrical/Controls Engineering or related, or equivalent combination of education and experience2-6 years of experience in a Controls/Project Management/Facilities capacity preferred, 2-6 years working experience with control systems architecture and programming preferredKnowledge of industrial mechanical systems from concept through final design and implementation as well as troubleshooting and repair..Skilled in: effective communication and presentation skills, customer focus (building productive relationships), Microsoft office (Word, Excel, PowerPoint)Demonstrated ability to: effectively communicate ideas to gain consensus from individuals or teams; demonstrate technical proficiency with expertise; balance multiple projects simultaneously; comprehend technical drawings and specifications; plan and execute special projects and reporting; work well in a collaborative environment.Honda Factors: Ability to balance the wants/needs of the customer department with facilites equipment service team requirements. Demonstrate solid base of technical knowledge in day-to-day operations. Knowledge of Honda project flow, budgeting and cost reporting. Project tracking and reporting for PDCA and Nariyuki development.WorkstyleOffice and industrial environment.Ability to work overtime as needed to complete tasks and meet deadlinesWork all appropriate weekends/shutdowns to manage projects and cover production needs.Benefits and Total RewardsWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive base salaryOvertime compensationAnnual BonusAssociate lease car program with a costIndustry leading Benefit Plans (Medical, Dental, Vision)Paid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement opportunitiesCareer mobilityEducation reimbursement for continued learningTraining and Development programsAdditional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

The Harris Products Group (HPG),a wholly-owned subsidiary of The Lincoln Electric Company, is a world leader in metal working products used inthe brazing, soldering, welding, cutting and gas distribution industries. The company was formed in 2006 with the merger of Harris Calorific, Inc., a manufacturer of gas welding and cutting equipment and gas regulation and distribution systems, and the J.W. Harris Co., a manufacturer of brazing and soldering alloys and welding consumables.The Harris Products Group currently operates manufacturing facilities inMason, Ohio, USA; Gainesville, Georgia, USA, Dzierzonow, Poland, and Sao Paulo, Brazil. Each is ISO 9001 certified for quality management systems.Demonstrating a commitment to stewardship of the global environment, these facilities are also ISO 14001 certified for environmental management systems.Location: Mason Employment Status: Salary Full-Time Function: Engineering Req ID:25594 PurposeThis Engineering Development Program is an ideal entry point to the vast opportunities available to you within the Harris Products Group. Completing this development program will help you to gain in-depth knowledge about The Harris Products Group's solutions which include, brazing, soldering, welding, cutting and specialty gas equipment, each of these provides a unique and viable career path.The Harris Products Group Engineering Development Program will provide meaningful experiences that will build upon your education. Engineering Development Program hires will be based in Mason, Ohio. This position will challenge your engineering skills and provide an opportunity to launch into your new engineering career.Throughout the 3 to 6 months program, you will spend time in the following departments:FinanceProject ManagementMarketingProcurementPlanningPurchasingSalesAt the conclusion of the program, you will move into an Engineering level 1 position in one of our manufacturing departments.Minimum Qualifications:Bachelors ofEngineering degree with a preference for Mechanical, Industrial, or Materials Science EngineeringCumulative GPA of 3.0Ability to work in the United States on a full-time, permanent basis.Desire to work in a manufacturing environmentDesire to work independently and as part of a teamPassion for innovationLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeLeads, creates, and implements innovative technical activities and solutions in the areas of Business Plan, New Model, and Mass Production to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost and Morale characteristics targets.Key AccountabilitiesDevelop, implement, and maintain methods, operation sequence, and processes in the manufacturing or fabrication of parts, components sub-assemblies, and final assemblies.Review and analyze daily report(s) to identify SQD potential countermeasures and /or root cause analysis opportunities and strive for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense.Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines/Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, & SkillsBSME / BSMET / BSEE / BS Manufacturing Engineering or equivalent experience2-8 years of relevant experience based on educationComputer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilitiesDemonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost.Strong technical analysis and troubleshooting skillsAbility to manage projectsKey Performance IndicatorsAchievement of project targetsTimely execution of business plan themesPlan vs. Actual of budget within production areasCommunication and Working RelationshipsProduction engineering, associates, line support staff, managers, and up/down stream departments: communicate project and countermeasure needs and activity. Department and plant management: communicate project status and evaluationsSuppliers, contractors, service providers – research and communicate project specifications, installation requirements, and general activities needed to enhance operationsDecisions ExpectedFollow-up on daily line performance and countermeasure areas of concernDevelop / Design strategy to achieve unit and company initiativeLeadership and development of other levels / ability to challengeLead and evaluate business planning (Justification for resource changes)Determine budget and schedule activity needed to improve operationsJob CompetenciesLeadership and communication capabilities to work with all levels of associates. (both written & oral).Project management must be demonstrated with knowledge and understanding of E-Flow experience.Ability to solve complex problems through analysis and propose / implement appropriate countermeasures.Aligns planning and goal setting to the company vision.Demonstrates interest in new ideas and technology through openness and accessibility.Ability to lead and manage associates in multiple areas simultaneously.Ability to work through communication barriers.Ensures continuous improvement processes and targets are implemented.Considers customer viewpoint in decision making process.Working ConditionsWork in production environment requiring PPE and lockout in manufacturing operationsWorking near oils, cutting lubricantsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per weekPossible weekend or off-shift support as necessaryTravel 5% (domestic & international)Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThe Manufacturing Equipment Senior Engineer will manage and improve production line productivity and quality relative to cutting tool designs to achieve manufacturing characteristic (SEQDCM) improvements.Key AccountabilitiesLead tool budget creation, control, and analysis to evaluate cutting tool budgetsLead/coordinate daily engineering support troubleshooting tooling problems to achieve quality, cost and delivery targets; develop and maintain tools, tool drawings and holdersPerform and coordinate tool analysis - documenting and reporting the results for continuous improvement through the use of sound engineering theory and technology to improve running characteristics (SEQDCM)Coordinate the development of cutting tools, tool holders, and machining process for new model, capacity up, and new technology implementationProvide technical support for internal tool setup and tool regrind processesSupport line side trial runs during tool test and new models to ensure quality and delivery is achievedLead collaborative meetings & negotiate with customers/suppliers of all levels & capabilitiesCommunicate and present technical issues and tool reports to audiences of all backgrounds and levelsWork with production, new model, machining, product development and other engineering to ensure balanced processing occursBuild mutually beneficial relationships with customers and suppliersDevelop, manage and execute Business Plan activities in a timely mannerQualifications, Experience, and SkillsBachelors Degree in Engineering (Mechanical, Electrical) or related equivalent experience2-8 years of experience based on educationKnowledge of: Microsoft Office, AutoCad 2D & 3D, SolidworksSkill In: Presenting, written communication, organizational skillsAbility to: Convey manufacturing concepts to associates, perform advanced mathematics, read engineering designs, manage projectsWorking Conditions40% Office environment & 60% Production Floor implementing projects and/or countermeasures1-2 day trips approximately 3 times per year. Potential overseas travel for 2-4 weeks at a time with New Model5-12 Hours overtime per week / Some weekends and holiday/shutdown work as neededWhat differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

LocationAnna, OhioOnsiteJob PurposeLeads, creates, and implements innovative technical activities and solutions in the areas of Business Plan, New Model, and Mass Production to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost and Morale characteristics targets.Key AccountabilitiesDevelop, implement, and maintain methods, operation sequence, and processes in the manufacturing or fabrication of parts, components sub-assemblies, and final assemblies.Review and analyze daily report(s) to identify SQD potential countermeasures and /or root cause analysis opportunities and strive for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense.Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines/Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, and SkillsBSME / BSMET / BSEE / BS Manufacturing Engineering or equivalent experienceA minimum of two years ofrelevant experience based on educationComputer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilitiesDemonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsWorkstyleWork in production environment requiring PPE and lockout in manufacturing operationsWorking near oils, cutting lubricantsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per weekPossible weekend or off-shift support as necessaryTravel 5% (domestic & international)At Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda. Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment. We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary: Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc.Annual BonusOvertimeIndustry leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionLifestyle BonusRelocation assistanceCareer Growth:Advancement opportunitiesCareer mobility Education reimbursement for continued learningTraining and Development programsAdditional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position: The Quality Engineer’s core role and responsibility is to assure quality products to our final customer through data collection and analysis that supports specifications to manufacturing, confirmation testing, and quality problem solving.Responsibilities include:Collect test/analysis data using a variety of equipment/methods. Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Write technical reports to document analysis and countermeasure activity. Review and analyze daily report(s) to identify safety, quality, delivery gaps and develop potential countermeasures and /or root cause analysis opportunities striving for continuous improvement.Execute analysis plan for quality concern. Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Support conclusion of results after analysis planPropose countermeasure activity, including process and/or specification changeSupport the development of analysis plan for quality concern. Who we are seeking: Required Work Experience:0-6 years of experience dependent upon education1 term as a co-op/ intern for Honda or in a similar manufacturing environment preferredRequired Education:Bachelor’s Degree in EngineeringDesired skills:Positive attitude, open minded, and a team playerAbility to solve complex problems through analysis to propose and implement appropriate countermeasures based on timing, quality, and costStrong communication skills and problem-solving skillsStrong self-motivation and desire to work in a manufacturing environmentAdditional Position Factors:50% office area; 40% laboratory area; 10% production areasOT of approximately 4-8 hours per weekWorking with hand/power tools, quality gauging, and instrumentationWhat differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeLeads, creates, and implements innovative technical activities and solutions in the areas of Business Plan, New Model, and Mass Production to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost and Morale characteristics targets.Key AccountabilitiesDevelop, implement, and maintain methods, operation sequence, and processes in the manufacturing or fabrication of parts, components sub-assemblies, and final assemblies.Review and analyze daily report(s) to identify SQD potential countermeasures and /or root cause analysis opportunities and strive for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense. Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines/Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, and SkillsBSME / BSMET / BSEE / BS Manufacturing Engineering or equivalent experience2-8 years of experience as an engineering staff in a manufacturing environment or other relevant manufacturing experienceComputer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilities Demonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsDecisions ExpectedFollow-up on daily line performance and countermeasure areas of concernDevelop / Design strategy to achieve unit and company initiativeLeadership and development of other levels / ability to challengeLead and evaluate business planning (Justification for resource changes)Determine budget and schedule activity needed to improve operationsWorking ConditionsWork in production environment requiring PPE and lockout in manufacturing operationsWorking near oils, cutting lubricantsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per weekPossible weekend or off-shift support as necessaryTravel 5% (domestic & international)Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Manufacturing EngineerEX1 CL3Location: Anna, OhioWhat Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position: The Manufacturing Engineer will lead, create, and implement innovative technical activities and solutions in the areas of Mass Production, Business Plan and New Model to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost, and Morale characteristic targets. Responsibilities include:Effectively communicate upstream and downstream to all levels of the organization to assure common understanding and direction.Review and analyze daily report(s) to identify safety, quality, delivery gaps and develop potential countermeasures and /or root cause analysis opportunities striving for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense. Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement.Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Who we are seeking: Required Work Experience:One term as a co-op at Honda or in a similar manufacturing environmentRequired Education:Bachelor’s degree in engineering (mechanical, manufacturing, electrical, industrial), 6 years’ engineering experience required in lieu of a degreeDesired skills:Computer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilities Demonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsAdditional Position Factors:Work in production environment requiring PPE and lockout in manufacturing operationsManufacturing environment with the potential of working near hydraulic oils, cutting lubricants, ferrous and aluminum materialsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, automation equipment, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per week possiblePossible weekend or off-shift support as necessaryTravel 5% (domestic & international)At Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda. Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment. We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and make us an employer of choice Total Rewards:Competitive base salary Annual BonusPaid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement opportunitiesCareer mobility Education reimbursement for continued learningTraining and Development programs Additional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job Purpose:The Noise Vibration Test Engineer role within the 4wd Group of the Assembly Department is primarily responsible for Mass Production and New Model Noise Vibration Analysis. Activity will include set up, data collection and data analysis with a focus on bench testing for noise, vibration and function of Power Train Components (4-Wheel Drive components) produced by Honda.Key Accountabilities:Analysis of powertrain products to validate quality in areas of Noise Vibration Harshnessand function.Operation of data acquisition equipment and multiple transducer types to verify test conditions and judgment requirements are met.Make detailed test reports and communicate results with customers.Make detailed test procedures and equipment operation manuals to train other group members.Conduct analysis of product non-conformance to determine root cause and implement countermeasure activity.Work with design and manufacturing groups on special projects to ensure a high-quality product at a competitive cost.Qualifications/Experience/Skills:Minimum Educational Qualifications- Bachelors Degree in Mechanical Engineering or Mechanical Engineering TechnologyMinimum Experience- ~0-6 Years Full Time or College Co-Op experience in a manufacturing related product development and/or project management roleOther Job-Specific Skills- Use of data acquisition equipment with an automotive focusKnowledge / Experience with installation of powertrain componentsWorking Conditions:Overtime will be required when a line downtime condition exists. (Based on the severity of the concern)This position works in an open office environment.Typical workday for this Job is 80% soft side data analysis 15% Noise Vibrationbench confirmation and 5% meetingWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job Purpose: Leads, creates, and implements innovative technical activities and solutions in the areas of Business Plan, New Model, and Mass Production to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost and Morale characteristics targets.Key Accountabilities:Develop, implement, and maintain methods, operation sequence, and processes in the manufacturing or fabrication of parts, components sub-assemblies, and final assemblies.Review and analyze daily report(s) to identify Safety Quality Deliverypotential countermeasures and /or root cause analysis opportunities and strive for continuous improvement.Utilize data analysis and Plan Do Check Act (PDCA )to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense. Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget, and resource allocations to ensure successful completion and target achievement. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, and Skills:BS in Mechanical / MET / Electrical / Manufacturing Engineering or equivalent relevant experience2-8 years of relevant experience based on educationComputer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilities Demonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsWorking Conditions:Work in production environment requiring Personal Protective Equipment and lockout in manufacturing operationsWorking near oils, cutting lubricantsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, quality gauging and instrumentation50% office environment/50% manufacturing lineside activity10-15 hours overtime per weekPossible weekend or off-shift support as necessaryTravel 5% (domestic & international)What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThe primary mission of this position is to lead activities related to equipment characteristic improvement for the Ohio Transmission Plant, High Pressure Die Cast Department. This will be accomplished by performing true root cause analysis of top problems and implementing countermeasures. The goal is to facilitate department S, Q, and D metric target achievement.Key AccountabilitiesManufacturing Equipment Expert:Equipment top problem root cause analysis and permanent countermeasure.Collect, analyze, and summarize information and trends related to equipment performance.Identify improvement opportunities for Key Performance Indicators and for cost avoidance/elimination.Become an expert in a specific area of automation technology (i.e. PLC, Motion Control, Robotics, etc) Then, train associates on equipment or process changes.Lifecycle management of manufacturing equipment. (Spare Parts, Procedures, PMs)Project Management: Define and create scope of design and construction for renovation, upgrade of existing electrical systems, or for build of a new system with a focus on cost control. Conduct PDCA during design and implementation stage. Create, implement and maintain project schedules and achieve desired results.Review, verify and approve electrical engineering drawings at the various design completion levels. Work with and manage contractors' activities throughout the different phases of a project.New Technology: Use manufacturing expertise to support company’s development of new processes.Qualifications, Experience, and SkillsBachelor’s Degree in Mechanical or Electrical Engineering or 6 years equivalent related experienceAbility to interact in a team environment, PLC Programming, Robotics, Vision Systems, electrical controls, safety systems, servo motor, VFD control, AutoCAD electrical design, MS OfficeWorking ConditionsWork at the spot, in the factory50% Office environment, 50% Production Floor environmentAbout 2 weeks of travel domestic and international and 300-500 hours of OT annuallyWhat differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeLead Engineering team through application of problem solving, continuous improvement and associate mentoring/development, in alignment with efficient production, new model introduction, business plan implementation and innovation to achieve or exceed targets that promote associate success.Key AccountabilitiesOversee equipment function and line flow of assigned area.Continuous development of self, colleagues and team through training and mentoring to proactively improve areas of management expertise for personal and team growth.Evaluate and ensure management of critical production issues (down time, quality, and safety issues etc.) for allocation of resources and appropriate action is taken in a timely manner.Evaluate and assess concerns identified by team to help or guide them to address or correct and resolve issues utilizing Plan Do Check Act (PDCA).Monitor daily Safety EnvironmentQuality Delivery Cost Morale (SEQDCM)conditions by reviewing daily reports to manage department outflow.Manage projects for business plan and new modelManage required organizational resources (manpower, structure, budget) necessary to achieve operational expectations.Collaborate in the development of Business Plan Strategy and new technologies or model introductions to improve production characteristics and ensure voice of the floor is heard.Qualifications, Experience, and SkillsBachelor’s degree in engineering or engineering technology (e.g., mechanical, electrical, industrial and robotics) or other equivalent related experience8+ yrs experience based on educationKnowledge and experience with Honda business planning processExpertise within manufacturing department of assignmentWorking Conditions0-15% travel requirement for training and offsite support/meetings as neededDaily, weekly, weekend and holiday overtime is required and will varyAble to work varying/rotating shifts for extended periods of time if requestedWhat differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Regional Bonus (when applicable)Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer MobilityEducation Reimbursement for Continued learningTraining and Development ProgramsAdditional Offerings:Lifestyle AccountChildcare Reimbursement AccountElder Care SupportTuition Assistance & Student Loan RepaymentWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeEffectively lead multi-disciplinary facility electrical engineering projects with capabilities to implement and communicate an operational plan for completing a project, monitor progress and performance against the project plan; resolve operational problems, minimize delays, develop, and gather necessary resources to complete the project. Project scope includes current situation assessment, design, coordination, electrical capacity, coordinate process demand with current infrastructure capacity. Productively manage workload to successfully complete end of life, new investment, and customer driven projects. Systemize, standardize, and simplify the electrical projects.Key Accountabilities•Electrical Engineering– Specify and evaluate the equipment and installation for all electrical equipment. Evaluate drawings, teach, and train other discipline engineers on electrical specialty. Assess electrical capacity versus current demand. Evaluate end of life and innovate new characteristic changes on all electrical infrastructure. •Support operation of Facilities electrical systems including but not limited to generators, electrical panels, busways, transformers, breakers, and lighting and controls. Manage and maintain documentation for the site Electrical Systems. Communicate critical updates to site system operators •Utility Outages – Coordinate all power outages with internal departments, contractors, and outside entities as required. Issue electrical schedules to affected customer and receive approval to proceed. Schedule contract work and equipment service support to complete each power outage. •Support development of maintenance & investment budgets for the department electrical equipment and projects. •Simplex (life safety) Expert – Coordinate all life safety work with life safety expert, Simplex. Provide feedback to Simplex on performance and required areas for improvement. Evaluate project progress and identify areas for improvement. Coordinate life safety work with electrical contractor, equipment service, customer department, County inspector to ensure work is complete without impacting SQCEDM categories. •Project Management - Work with internal customers and external consultants, contractors, and suppliers to develop initial concept, specifications, design drawing review, procurement scope, fabrication / construction, and installation-related documents. Qualifications, Experience, and SkillsMinimum Educational Qualifications Bachelor of Science degree in Electrical EngineeringMinimum Experience 1 to 4 years of experience developing, coordinating, and managing Electrical, Mechanical and/or facility related projects preferredOther Job-Specific Skills Use knowledge and experience to continually improve efficiency and effectiveness of tasks within area of expertiseActively support / participate in project team activities related to significant business innovation; develop and execute activities / tasks to achieve objectives of business teamDemonstrate solid base of technical knowledge in day-to-day operationsStrong data analysis, and problem-solving skillsStrong communication skills, both oral and writtenProficient with Microsoft Office (Work, Excel, PowerPoint)Ability to use AutoCADAbility to read Electrical and mechanical drawingsJob DimensionsFinancial Dimensions Responsible for investment and expense spending for Facilities R&M to $1M+ multidisciplinary project scopes, Complete EOL analysis and Budget forecasting as neededDecisions ExpectedSet direction for equipment projects (method, layout, support requirements, etc)Determine department strategy and plans to strengthen business characteristicsDetermine appropriate methods to renew and install equipment to mitigate risk to current & future operationsWorking ConditionsAbility to work overtime as needed to complete tasksOffice, Shop, and Plant environmentWork all appropriate weekends / shutdowns to manage projects and cover production needs.Complete work tasks under limited supervisionHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job Purpose: Optimize Honda & Supplier performance (SEQCDM) through continuous improvement (PDCA) in a culture of innovation to attain highest quality & value for our customer. Provide technical engineering expertise to ensure part and process can meet mass production quality requirements and demand.Key Accountabilities:Review, evaluate, and approve supplier process including Failure Mode and Effect Analysis (FMEA), Process Quality Control Table (PQCT), Operation Standards, and Manufacturing Quality Standard (MQS) for successful MP launch.Oversee and manage complex problem-solving analysis and investigations. Provide technical engineering expertise and effective solution.Lead engineering investigations to complete root cause analysis, and direct problem-solving activity. Coordinate all related parties (Supplier/D-side/E-side) to proceed activity.Perform in depth analysis related to the production process to minimize customers concernsIdentify, analyze, and resolve negative quality trends and design concerns. Lead technical discussion with supplier(s) and design side to applyConfirm incoming event parts quality by using gages, gear profile checker, Capability Maturity Model (CMM), etc. to ensure quality before build events.Manage and support communication with suppliers and other departments in regards to countermeasures.Mentor new associates (entry level) within group on problem solving, procedures and fostering development.Qualifications, Experience, and Skills:Bachelor’s Degree in Engineering or relevant experience required2-8 years of experience based on educationMicrosoft office, CATIA,SQL, PQCT/FMEA experience preferredWorking Conditions:Travel required up to 50% of the time both domestic and internationalOpen office professional environmentOvertime average 5 hours per weekTemporary short term off shift support may be requiredWork in a team environment as well as independentlyAbility to present to varying audiences and prioritize multiple tasksWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeManage and Lead Assembly Systems Group which contains the Global Automated Line Control (GALC), Line End Tester (LET) and Torque Groups in order to achieve and improve the impact these groups have on plant’s Safety Quality Cost Delivery Morale Environment (SQCDME) metrics.Key AccountabilitiesSystems Group Lead - Monitor GALC, LET, and Torque Group SQCDME impact and report daily trigger items to Department and Plant management. Oversee countermeasure implementations for each root cause.Project Management - Execute & manage the plan (SAP) - Lead activity (weekend & shutdown) with all projects (both internal & external) to allocate appropriate resources, minimize interferences, maximize efficiency, and track project progress to achieve results.Associate Development – Takes action to build effective working relationships between individuals from different cultures, backgrounds, viewpoints & experiences. Ensure Process staff has the correct level of training. Deploy formal training, “On the Job Training”, and close associate knowledge gaps. Mentor to ensure technical knowledge of associates meets requirements to be successful.Program Lead – Understand all downstream systems and threats of AssemblySystems (LET, DC Tools, GALC, etc.), and guide Systems Engineering team(s) to remain compliant with policy and procedure. Set expectations for the Systems Team and hold contributors accountable for completion of countermeasures and implementations.Budget Management – Maintain team budget for expense. Set and maintain annual overtime budget for Systems staff. Fill open positions and stay within budget set by Department Leadership. Oversee Capital Investment projects driven by Systems Group. Ensuring projects stay on schedule and serve the intended purpose. Budget responsibilities include formulating requests, tracking expenditures, and adjusting budgets to address business needs.Qualifications, Experience, and SkillsBachelor’s degree in Electrical, Mechanical, Computer, or related Engineering field, related discipline, or equivalent experience8-10 years of related work experienceKnowledge/Experience Required:Strong leadership skills. Subject matter knowledge of manufacturing engineering tools and best practices for automobile assembly and systems. Peripheral knowledge of network and systems contribution to production metrics including overall associate safety, product quality, delivery capability, cost impact, and morale.Knowledge/Experience Preferred: People leadership, presentation skills, project planning/leadership, team budgeting/Overtime planning, Part Traceability, Automotive/Manufacturing Fastener Control, Vehicle Electronics, Automotive New Model Flow, 5S, Lean Manufacturing, Genba, etc.Skills Required:Leadership focus (motivator, team development); project leadership (deliver on targets); effective oral and written communication and presentation skills; Microsoft Suite (Teams, Word, Excel, PowerPoint).Demonstrated Abilities:Effective communication of ideas to gain consensus from individuals or teams. Technical proficiency with expertise on some of the topics within area of expertise. Balancing multiple projects simultaneously. Comprehending technical drawings and specifications. Planning and executing complex projects and reporting to division managers. Working well in a collaborative environment.Honda Factors: Ability to balance the wants / needs of the customer with AF operational requirements. Project tracking and reporting (specifically cost, schedules, and results).Working ConditionsMixture of office and assembly floor environmentsFlexibility to work different shiftsAbility to work overtime, appropriate weekends, or shutdowns to manage projects and meet operational needsWillingness to travel for benchmarking or business planning eventsWhat differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Regional Bonus (when applicable)Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer MobilityEducation Reimbursement for Continued learningTraining and Development ProgramsAdditional Offerings:Lifestyle AccountChildcare Reimbursement AccountElder Care SupportTuition Assistance & Student Loan RepaymentWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeLead paint materials development (Pretreat, sealant, and paint coatings) from R&D (Research and Development) to production application through strategic planning and execution to achieve product specifications and key SEQDCM metrics to exceed customer expectations.Key AccountabilitiesDevelop, implement, and manage materials plans to achieve new model, plant, and department objectives.Develop material budgets and track cost expenditures against department and plant targets.Support new color development trials in body paint with the ability to adjust programming to achieve desired results.B-Shift contact for all issues related to production materials.Monitor titration levels and material flow for phosphate and E-coat system tanks.Support and execute root-cause problem analysis and quality improvement activities related to phosphate, E-coat, sealer, deadener, primer, and topcoat materials.Material group liaison to all Paint Innovation related projects.Mentor and develop capability of new materials group and paint mix members through teaching and training.Ensure daily, weekly, and monthly team tasks are completed on time. Summarize results and report to Department LeadershipSupport all Global Ooperation driven material changes and ensure all materials meet spec within line and plant characteristics.Qualifications, Experience, and SkillsBachelor’s Degree in Engineering (e.g. Chemical Engineering, Materials Science Engineering) or equivalent relevant experience .2-8 years of experience based on educationComplex problem analysis skills, knowledge of Microsoft Office (Excel, Power Point, Word), Time managementWorking ConditionsPrimarily B-shift role, with some flexibility in scheduleAbility to travel, both domestic and international0-5 hours of overtime per week possibleWeekend and Holiday work may be required50/50% Standing vs. sittingShutdown work may be requiredWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position: The Weld Quality Engineer will be responsible for identifying quality issues, establishing containment, developing, and implementing countermeasures to ensure acceptable quality for Honda products and parts. You will perform activity related to the development, implementation, operation, and documentation pertaining to maintaining quality for automotive white bodies. Responsibilities include:Lead and manage complex problem solving analysis, investigations, report writing, and containment/repair activity utilizing quality engineering principles (Complex Analysis) Perform technical in-depth analysis related to mass production processes to minimize customer concerns (Line Call Support) Identify reoccurring problems and conduct design problem analysis to solve the issues (24 Point, Comp, WB Accuracy Reporting) Review new model drawings/parts and identify actual and potential problems, clarify and review with applicable departments, implement countermeasures to avoid problem occurrence at mass production (New Model Equipment Counter Measure Activity) Analyze proposed countermeasures, judge their effectiveness once implemented, and manage change point control (MQS Review and Reporting) Develop scorecard materials on monthly basis related to quality standards Lead design activity with related departments groups, suppliers, and R&D to confirm design verses actual manufacturing condition and whether that design is acceptable based on past problem history. (New Model Equipment Design Development) Provide technical support throughout tool trials and crisis activity, as needed (Crisis MP Support) Who we are seeking: Required Work Experience:One term as a co-op at Honda or in a similar manufacturing environment preferredRequired Education:Bachelor’s degree in engineering (mechanical, electrical, industrial, etc)Desired skills:Strong interpersonal skills, high-impact communication skills, project management skillsProficient Catia & Enovia skills – capable of producing and operating 2D/3D models Advanced problem-solving skills and proficient in problem analysisBasic Computer Skills with Microsoft Office ProductsAdditional Position Factors:OT necessary at times to complete tasks and coverage Travel may be necessary for training & meeting with other Weld facilitiesWhat differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.