FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Role Overview: Lifesaving technology, powered by you. Your expertise impacts the lives of others.Sodexo is seeking 2 Imaging Field Service Engineer 3'sforUniversity Hospital Health Systemsin Cleveland, OH. This person will inspect, repair, maintain, and calibrate basic diagnostic imaging equipment, devices, systems, and instruments. Interact on a routine basis with other clinical health providers in the identification of technology-based problems. What You'll Do: ensure all medical equipment is maintained in a quality and timely mannerrepairing, maintaining and calibrating medical imaging devices; in a hospital or healthcare settingability to make decisions regarding troubleshooting and repairing medical imaging devicesspecific experience with the following medical devices or equipment: DiCom, Siemens, Toshiba, Philips, GE Healthcare, XRay, Ultrasound, C-Arm, Cat Scan, MRI/CT, Radiation Therapy, Nuclear Medicine, Wet or Dry Processor, General RF, Clinical Asset Management, Accelerators What We Offer: Compensation is fair and equitable, partially determined by a candidate's education level or years of relevant experience. Salary offers are based on a candidate's specific criteria, like experience, skills, education, and training. Sodexo offers a comprehensive benefits package that may include:Medical, Dental, Vision Care and Wellness Programs401(k) Plan with Matching ContributionsPaid Time Off and Company HolidaysCareer Growth Opportunities and Tuition ReimbursementMore extensive information is provided to new employees upon hire. What You Bring: experience repairing, maintaining and calibrating medical imaging devices including X-rays, Siemens/ GE CT & MR, and other imaging equipment.7+ years' experience in an imaging roleexperience in a hospital or healthcare settingability to make decisions regarding troubleshooting and repairing medical imaging devicesprior knowledge of renowned medical equipment, preferably Philips, GE, Siemens, etc.ability to participate in on-call rotation schedule as required Who We Are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide.Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you’re happy at work. This is why we embrace diversity and inclusion as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need assistance with the application process, please complete this form. Qualifications & Requirements: Minimum Education Requirement - Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environmentMinimum Functional Experience - 7 years of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training. Significant factory-level training of imaging equipment contributing to the effectiveness of the organization. Preferred CRES nationally

9860 York Alpha Dr #3586, North Royalton, OH 44133CNC Programmer / Machinist Cutting Edge Projects with Top Tier Technology Positive, Family-friendly Work Culture & Great Benefits1st Shift, Overtime Opportunities Available Join the Future of Aerospace Manufacturing at Lunar Tool & Mold!Lunar Tool & Mold, a second-generation precision manufacturing firm at the forefront of Ohio’saerospace industry, is HIRING NOW for a CNC Programmer/ Machinist with 3-5+ years of experience to join our elite team.Operating since 1965, we bring nearly six decades of expertise in designing, engineering, machining, and manufacturing high-precision tools and molds for defense contractors andaerospace firms across the United States. Our state-of-the-art facility in North Royalton, OH, is equipped with top-tier technology, including Southwest/Bridgeport Bed and Knee mills, Makino EDMs, and cutting-edge CNC tooling from Makino, Mitsubishi, and Hwacheon.As a CNC Programmer/Machinist, you will play a key role in crafting high-precisioncomponents, programming advanced CNC machines, and ensuring the tooling we producemeets the strict standardsdemanded by our global aerospace clientele. You'll work with state-of-the-art CAD/CAM software, collaborate with top engineers, and contribute to some of the most innovative projects in the industry.At Lunar Tool & Mold, we don’t just invest in state-of-the-art equipmentwe invest in ourpeople. We foster a positive, team-oriented environment where your skills are valued, and your contributions are celebrated. From recognition events to team outings, we believe a happy, motivated workforce leads to superior craftsmanship. If you’re ready to elevate your career in a workplace that values precision, teamwork, and innovation, we want to hear fromyou!We Offer:Competitive Compensation based on experienceLevel 1: $27–$35 per hourLevel 2: $30–$45 per hourWork Schedule: Full-time, 1st shift, Monday to Friday, with overtime opportunities available.Bonuses and Profit Sharing: Annual bonus payout and participation in our Profit-Sharing Program.Comprehensive Benefits: Full family medical, dental, and vision insurance; short- and long-term disability insurance; life insurance.Retirement Plan: 401(k) with company match.Additional Perks: Flexible Spending Account, paid vacation, holidays, and sick time.Professional Development: Access to training programs to support your growthWeinvest in your success!Innovative Environment: Exciting projects and challenges at the forefront of aerospace innovation.Modern Facility: We continuously reinvest in top-tier machinery, prioritizing quality above all else.We also offer video or phone interviews to accommodate out-of-town applicants.ResponsibilitiesCNC Programmer/ Machinist:Precision CNC Programming & Machining: Develop and execute highly accurate 3D tool paths using NX CAD/CAM softwareBlueprint Interpretation: Read and interpret blueprints to maintain tolerances of +/- 0.001”Collaboration with Engineers & Machinists: Provide input on tooling design, ensuring feasibility and efficiency in manufacturingCNC Setup & Operation: Configure and operate CNC machines, including Fadal, Mitsubishi, Fanuc, Makino, and other systemsQuality Assurance: Analyze Blue Light Inspection reports to ensure tooling meets exact specificationsProcess Standardization: Utilize internal documentation and templates to streamline CNC programmingProject Management & Coordination: Delegate machining tasks to ensure on-time project completionContinuous Improvement: Identify and implement efficiency and quality enhancementsQualificationsCNC Programmer/ Machinist:1+ years of experience creating 3D tool paths (high-precision aerospace environment preferred)3-5+ years of experience programming and machining complex componentsCAD/CAM Proficiency: Experience with NX, CATIA, AutoCAD, SolidWorks, or other professional CAD/CAM softwareEducation: High School Diploma, GED, or equivalentAbility to set up CNC tooling and machine blocksStrong understanding of CNC control systems (Fadal, Mitsubishi, Fanuc, Makino, etc.)Familiarity with common tool room equipment (mills, lathes, grinders, drill presses)Skilled in precision measurement tools (calipers, indicators, depth mics)Siemens NX ExperienceComputer Skills: Above-average computer literacy and proficiency with common computer products such as Microsoft OfficeStrong time management and independent work mindsetExcellent communication skills to coordinate with engineers and machinistsMechanical aptitude with an emphasis on accuracy and efficiencyPlease upload your resume and complete the online assessment for immediate consideration. Candidates must pass pre-employment screening.We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment regardless of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Engineering Co-Op If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Euclid is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ SEMESTERS AVAILABLE Fall 2025Spring 2026Summer 2026Fall 2026 JOB SUMMARY Engineering Co-ops will be assigned to New Product Development engineering or Production Engineering working cooperatively with manufacturing to develop robust processes and tooling to support the company’s growth in the industrial and aerospace investment casting markets. Individuals identified as dimensional will focus primarily on dimensional control, the dies, fixtures, gages, and other tooling associated with the manufacture of investment castings.Problem solving, and the concepts & tools of problem solving, are essential to the job. Engineers will be required to identify & define problems, perform root cause analysis, and implement solutions to problems that affect yield, rework, and overall quality of the product using a standardized approach (PDCA, Six-Sigma). Occasionally taking a leadership role in resolving cross-functional problems. The candidate must be able to travel locally periodically to other CPP facilities, customers and vendors to provide problem-solving and technical support. PRIMARY RESPONSIBILITIES Develop, maintain, and teach “best practice” investment casting procedures and practices.Responsible for the construction of all dies (shrink factor analysis), gages, and support tooling needed to produce and inspect cores, wax patterns, and castings.Interface with tooling vendors and CPP purchasing to produce a quality tool/die at a competitive price.Identify and address process yields using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.) to uncover variables in the process that are not maintained in a controlled fashion.Strong working knowledge of GD&T.Able to interpret customer drawings, specifications, models (CAD/NX), and layout reports.Good written and oral communication skills required to develop internal job instructions.Gage R&R, SPC, non-straightening processes and other cost reduction initiatives.Identify, evaluate and implement new process technologies that advance manufacturing and product capabilities.Communicate with tooling vendors to design concepts for wax pattern die rework, the build of gate dies and support fixtures.Document work procedures and processes.Work closely with other departments to ensure organization objectives are achieved.Improve Labor Utilization and Reduce Cost.Routinely audit production lots for adherence to established techniques and to ensure the repeatability of the results.Good verbal communications with all levels of management, manufacturing, and customer engineering groups. QUALIFICATIONS Working on a BS in Engineering. Junior or Senior Year Preferred. Tooling, design, and CAD (preferably NX) experience Preferred.Strong communication skills (written and verbal), PC skills and program management skills.Knowledge of Six Sigma and Lean Manufacturing Principles.Excellent organizational, interpersonal and documentation skills.Motivated individual with data driven problem solving techniques. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment.Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management positionThis is an internship position

The R&D Engineering Co-op position is for our Product Engineering Group focused in the Commercialization Engineering or Process Engineering. The co-op will be assigned a mentor and at least one “real world” project to complete during their assignment. Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each position, which will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of non-discriminatory factors considered in making compensation decisions including geographic location; skill sets; experience and training; licensure and certifications; and other business and organizational needs. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. he R&D Engineering Co-op position is for our Product Engineering Group focused in the Commercialization Engineering or Process Engineering. We are looking for innovative thinkers that are proven problem solvers. The co-op will be assigned a mentor and at least one “real world” project to complete during their assignment. Initially the individual would be expected to become skilled at making and testing paint.They would be responsible for assisting in optimizing formulations and processes through Design of Experiments and statistical analysis of the data. Potential to work with Operations for site projects. They will also be expected to participate in monthly and quarterly meetings presenting their work as needed. This position is for a minimum of 8 months starting in January 2026 through August 2026.EDUCATION Currently pursuing a Bachelor’s degree in Chemical Engineering or ChemistryBe a rising or current sophomore, Junior or Senior in college or university at the start of the Co-Op programMust have a HS diploma or GED Preferred Currently enrolled as Junior or SeniorChemical Engineering majorMinimum 2.8 GPA KNOWLEDGE & EXPERIENCE Must have access to reliable transportation and housingMust be at least 18 years of ageMust be willing to work up to 40 hours per week for a total of 6 months with or without reasonable accommodation Preferred Skilled at using Microsoft Word, Excel, and PowerPointBasic understanding of information technology infrastructure and computer platformsWorking knowledge of Minitab and Business Objects Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s staff, employees, and business relationships.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

BECOME A US FOODS® DRIVER!$12,000 Retention Bonus for qualified CDL-A DriversReady to build a career with a company that’s leading the foodservice industry We help YOU make it! Hourly pay $25.55Schedule: 3-6am dispatch time (10-12 hour shifts) 5 daysUS Foodsis one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus.Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery timesCarefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areasVerify accuracy of delivery with customers and obtain proper signaturesHandle collections and payments from customers when applicableProfessionally perform customer service responsibilities to enhance our client experiencePerform all pre-trip and post-trip equipment inspectionPhysical RequirementsAbility to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift requiredComfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) requiredWhat You Bring to the TableRegister to the FMCSA Clearinghouse*Must be at least 21 years of ageMust have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualificationsMinimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry requiredAbility to operate manual transmission preferred; may be required in specific locationsMust be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records.Why US FoodsUS Foods® helps our customersMake It, with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates.Great drivers are crucial to the US Foods® team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers.At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it!At US Foods®, we are committed to Total Rewards that respect and reward ourassociates for their dedication and hard work.*Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver’s license (CDL) and commercial learner’s permit (CLP) holders’ drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit https://clearinghouse.fmcsa.dot.gov/register and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $25.55/hour and $28.55/hour.Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.***EOERace/Color/Religion/Sex/SexualOrientation/Gender Identity/National Origin/Protected Veteran/Disability Status***

BECOME A US FOODS® DRIVER!$12,000 Retention Bonus for qualified CDL-A DriversReady to build a career with a company that’s leading the foodservice industry We help YOU make it! Hourly pay $25.55Schedule: 3-6am dispatch time (10-12 hour shifts) 5 daysUS Foodsis one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus.Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery timesCarefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areasVerify accuracy of delivery with customers and obtain proper signaturesHandle collections and payments from customers when applicableProfessionally perform customer service responsibilities to enhance our client experiencePerform all pre-trip and post-trip equipment inspectionPhysical RequirementsAbility to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift requiredComfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) requiredWhat You Bring to the TableRegister to the FMCSA Clearinghouse*Must be at least 21 years of ageMust have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualificationsMinimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry requiredAbility to operate manual transmission preferred; may be required in specific locationsMust be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records.Why US FoodsUS Foods® helps our customersMake It, with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates.Great drivers are crucial to the US Foods® team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers.At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it!At US Foods®, we are committed to Total Rewards that respect and reward ourassociates for their dedication and hard work.*Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver’s license (CDL) and commercial learner’s permit (CLP) holders’ drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit https://clearinghouse.fmcsa.dot.gov/register and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $25.55/hour and $28.55/hour.Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.***EOERace/Color/Religion/Sex/SexualOrientation/Gender Identity/National Origin/Protected Veteran/Disability Status***

BECOME A US FOODS® DRIVER!$12,000 Retention Bonus for qualified CDL-A DriversReady to build a career with a company that’s leading the foodservice industry We help YOU make it! Hourly pay $25.55Schedule: 3-6am dispatch time (10-12 hour shifts) 5 daysUS Foodsis one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus.Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery timesCarefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areasVerify accuracy of delivery with customers and obtain proper signaturesHandle collections and payments from customers when applicableProfessionally perform customer service responsibilities to enhance our client experiencePerform all pre-trip and post-trip equipment inspectionPhysical RequirementsAbility to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift requiredComfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) requiredWhat You Bring to the TableRegister to the FMCSA Clearinghouse*Must be at least 21 years of ageMust have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualificationsMinimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry requiredAbility to operate manual transmission preferred; may be required in specific locationsMust be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records.Why US FoodsUS Foods® helps our customersMake It, with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates.Great drivers are crucial to the US Foods® team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers.At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it!At US Foods®, we are committed to Total Rewards that respect and reward ourassociates for their dedication and hard work.*Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver’s license (CDL) and commercial learner’s permit (CLP) holders’ drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit https://clearinghouse.fmcsa.dot.gov/register and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $25.55/hour and $28.55/hour.Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.***EOERace/Color/Religion/Sex/SexualOrientation/Gender Identity/National Origin/Protected Veteran/Disability Status***