Medical PhysicistRole SummaryRadiation Oncology Associates, an independently owned physician practice, is seeking a clinical Medical Physicist to join our team in Fort Wayne, Indiana. The successful candidate will have the chance to work with an Elekta Flexitron HDR unit which includes treating with cylinders, tandem and ovoids, and Syed interstitial.In addition to the Flexitron, ROA has two Varian Truebeam linacs utilizing external beam treatment which includes IMRT/VMAT, SBRT, and SRS. ROA houses a GE Discovery CT. The ideal candidate will provide services at our Fort Wayne location, located on the Lutheran Hospital Campus, in addition to our satellite location in Warsaw, Indiana, typically one day a week. This is a great opportunity for a physicist looking to work with a close-knit team of experienced physicians, physicists, dosimetrists, and therapists. ESSENTIAL DUTIES & RESPONSIBILITIES:·Assist with planning, checking, and delivery of external beam and brachytherapy radiation therapy treatments for patients. ·Perform initial and weekly chart checks of patients under treatment. ·Perform monthly and annual quality assurance checks of linear accelerators and other equipment. ·Attend the operating room for brachytherapy procedures. ·Provide consultation to physicians and dosimetrists, including BED calculations, review of contours, fusions, etc. ·Assist with planning of brachytherapy and stereotactic treatments. ·Develop procedures and software tools for the initial and continuing evaluation of radiation therapy treatment, brachytherapy, simulation, and radiation measurement equipment. ·Develop equipment specifications and assist with acceptance testing and commissioning of clinic equipment. ·Help maintain a Quality Management Program that monitors, evaluates, and optimizes radiation oncology processes. ·Perform required training and education and keep abreast of new scientific methods and technological developments in radiation therapy.·Assists with planning and participation in supporting programs (i.e., chart rounds, safety meetings, and M&M review) to ensure effective and safe use of radiation.·Assist with renewal of ACR accreditation with maintaining proper records and correspondence pertaining to quality control and quality assurance, calibration, radiation safety and compliance with State and Federal regulations and standards of accrediting bodies.·Act as a resource for all clinic staff on technology questions. ·Work after-hours as needed, to complete quality assurance tasks.QUALIFICATION REQUIREMENTS:• PhD, DMP, or master’s degree in Medical Physics• Certified by the American Board of Radiology (ABR), the American Board of Medical Physics (ABMP), or Canadian College of Physicists in Medicine (CCPM)• Board eligible candidates will be considered. Must have passed Part II ABREquipment Experience Preferred:•Aria/Eclipse with Truebeams •Elekta Flexitron HDR Unit•VisionRTBy applying for this position, you agree that any calls from Epic Staffing Group and its subsidiaries may be monitored or recorded for training and quality assurance purposes.Epic Staffing Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, housing, age, disability or genetics.We will consider all qualified applicants for employment, including those with criminal histories, in a manner consistent with the requirements of applicable federal, state, and local laws.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Salary Full-Time Function: Engineering Req ID:26163 SummaryLincoln Electric is seeking an Electrical Project Engineer to join our team at the Fort Loramie Automation site. This position plays a critical role in managing and executing the engineering processes that drive the design, development, production, and service of Lincoln Electric’s state-of-the-art automation equipment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more.What You Will Do: As an Electrical Project Engineer, you will support the design and development of Lincoln Automation equipment for automotive, aerospace, appliance and energy industries. Your key responsibilities will include:Project Leadership & Coordination: Assist in defining project timelines, resource requirements, and staffing needs. Lead cross-functional teams, ensuring timely delivery of project milestones and adherence to financial targets (labor and material costs).Engineering Design & System Integration: Work closely with mechanical, electrical, pneumatic, and hydraulic engineers to drive the design of complex automation systems. Lead the creation and troubleshooting of control systems including PLC, Safety PLC, HMI, servo motion, and robot programming.Troubleshooting & Debugging: Guide teams in the development and resolution of issues. Oversee start-up, debugging, and final system maturation to ensure systems meet customer specifications and performance standards.Budget & Cost Management: Lead the effort in maintaining project budgets, ensuring efficient use of resources and alignment with financial expectations. Work with procurement teams to identify cost-effective suppliers and establish purchasing strategies.Onsite Support & Commissioning: Manage onsite installation activities, assist with equipment commissioning, and ensure successful system integration. Resolve any customer payment issues as required upon project completion.Documentation & Standardization: Coordinate compiling operator and maintenance manuals. Assist in developing and maintaining engineering and product standards to ensure consistency and high-quality deliverables. Ensure compliance with ISO documentation standards for projects.Team Development & Mentorship: Provide guidance and mentorship to junior engineers, ensuring their technical development. Assist in team performance evaluations, fostering a collaborative, high-performance culture.Education and Experience RequiredEducation: A technical degree in Electrical Engineering or a related field is highly desired.Experience: A minimum of 10+ years of hands-on experience in industrial automation design and engineering. Proven expertise in working with PLC/HMI systems, robot programming, control systems, network & fieldbus systems, and safety systems.Experience with electrical schematic creation and design using AutoCAD Electrical (preferred).Demonstrated leadership and project management experience, including working with machine builders, management teams, and cross-functional support functions.Ability to travel ~25%Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Company Description:Crown Equipment Corporation is one of the world’s largest material handling companies, with a reputation for award-winning product design, advanced engineering and technology, and superior after-sale service. Crown produces and sells a broad range of forklifts, batteries, chargers, automation, and fleet management technologies that are revolutionizing the material-handling industry.Job Responsibilities:Lead a product engineering group in the development of vehicle systems and/or software. Make individual contributions to engineering and design issues as required. Provide technical and product guidance to systems and software development team. Reporting to this position may be Electrical Engineers, Systems Engineers, Software Engineers or Technical Leads.Project Planning, Supervision and Technical Review - Design workflow chart, man-hours, material and activities needed to complete projects. Oversee development of project definitions, specifications and guidelines. Ensure project meets objectives. Lead and manage assigned resources to ensure project timeliness and appropriate direction. Establish scope and work priority. Answer questions, give direction and monitor project activities. Monitor and ensure integrity of design is maintained through the use of sound engineering practice, conformance to product goals, specifications, company and industry standards. Participate and provide feedback in engineering/design reviews. Review test results to ensure compliance to company and industry standards or guidelines. Propose and implement tools and other improvements to product development process. Resolve engineering design issues.Product and Technology Champion - Champion and lead the development of new products. Build product knowledge for the assigned truck model(s) or product. Study competitive products and new emerging technologies, making recommendations for how to upgrade, improve and evolve both product and process. Work directly with customers, sales teams, and development teams to ensure product meets customer requirements. Study customer applications and propose innovative products and features that improve customer processes. Identify customer application issues and propose solutions to improve those issues. Conduct product reviews to ensure that a competitive and innovative product is released for production.Leadership and Communication - Regularly communicate project status to supervisor, management and other departments. Communicate project objectives, expectations and company related information to the project team. Monitor staff quality of work, productivity and review with supervisors. Provide leadership while collaborating with other department managers to coordinate efforts and schedule for the development of components and other deliverables necessary to complete project.Employee Development - Create/revise job descriptions, conduct Talent Development discussion sessions, rate performance, and establish/track goals. Coach, motivate, mentor, and develop direct reports to successfully take on additional responsibilities. Perform other duties as assigned.Visit YouTube to learn more aboutCrown Equipment – Defining the Future of Material HandlingInternal Title: Group Leader Systems and SoftwareOnsite Work: Crown offers hybrid remote work for this position. A reasonable commute is necessary since mostly onsite work is required.Related Terms: Advanced Driver Assistance Systems (ADAS),Automated Driving,Automotive Engineer,Automated Forklift,Autonomous Development Engineer, Autonomous Guided Vehicles (AGV), Autonomous Vehicle Engineer, Autonomous Vehicle Technology, Connected & Automated Vehicle (CAV), Driver Assistance Systems, Electronic Engineer, Embedded Software, Engineering Manager, Engineering Supervisor, Product Development, Product Engineer, Automation Engineer Robotics, Self-Driving Cars, Software Developer, Vehicle Dynamics Systems Development, Vehicle Integration, Vehicular Automation, Vehicle Electrical Systems Development, Matlab Development, Simulink DevelopmentMinimum Qualifications:Bachelor degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or related field5 years of engineering experience in product development environment including model-based design of embedded control systems utilizing Mathworks tools (Matlab, Simulink, Stateflow, etc.)Project management and supervisory skillsGood written, verbal, organizational, and interpersonal skillsAbility to travel with overnight stays (0-5%)Reliable transportation to travel locally between company locations during scheduled workdayPreferred Qualifications:Working knowledge of the product series in lift truck design, industrial design and ergonomicsHands on mechanical, electrical, and automotive/vehicle experienceExperience in driver assistance, vehicle dynamics, or vehicle product/systems engineeringFamiliar with GitHub, C, C++, CANbus, CANape, CANalyzer, Confluence, Embedded C, FREE RTOS, Git, Jira, and PythonExperience utilizing agile project management methodologies for embedded software developmentWork Authorization:Indefinite U.S. work authorized individuals only. Individuals with temporary visas are ineligible. Sponsorship for work authorization, now or in the future, is unavailable.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.EOE Veterans/Disabilities#Ind-other

Our client, a global leader in digital reality solutions, combining sensor, software and autonomous technologies is seeking a Field Service Engineer to join the team supporting their clients in install, repair and calibration of CMM Machinery. Job Title: Field Service Engineer Home base: Cincinnati, OH, Dayton, OH, Fort Wayne, IN and Lansing, MI Pay Range: $30-34/HR+ Potential to earn OT What’s the Job Extensive Training Installation and machine maintenance, which includes diagnosis, repairs, certifications, and re-calibration of various machines at customer sites Perform service calls at customer sites to correct problems involving company products, diagnoses and corrects the problems. Provides technical support to other service representatives and customers What’s Needed Mechanical and electrical experience Travel Mon-Fri (home on the weekends) Benefits • Medical, vision, and dental coverage • 401K with match • Paid holidays If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup(NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeOperations Technology team is on a mission to develop and deploy Internet of Things (IoT) solutions aligned with our 2030 vision for manufacturing renewal. The IoT Systems Engineer is driving North American regional IoT projects as a technology and business expert by creating and directing the technology and innovative solutions that help users receive, control and manage information and diffusing across AEP ensuring robust, repeatable and controlled methods to maximize business value and support plant characteristics enhancements.Key AccountabilitiesDeployment of IoT technology projects related but not limited to asset condition monitoring, vision systems, AI and M/L, data processing, product quality including plans & targets to improve the business operating capabilities for the region.Support testing and development of IoT potential solutions before regional deployment.Monitor and report progress with metrics for IoT projects diffused across the region and proactively manage challenges or constraints.Qualifications, Experience, and SkillsMinimum Educational Qualifications: Bachelor’s degree in engineering or related area: Controls systems, computer science, data science or other equivalent degree with required experience.Minimum Experience: 0-6 Years experience based on educationOther Job-Specific Skills: Proficient knowledge in Python and Structured Query Language (SQL). (Some knowledge of HTML, Java Scripting preferred).Experience planning, scheduling, executing, and confirming activities and themes.Experience presenting updates to various levels of management.Proficient computer skillsPlanning, organizing, creating a plan and execution.Ability to work both independently and as a team member, demonstrating personal initiative and team player characteristics.Ability to communicate information efficiently and effectively to management team.Computer programming, project management, knowledge of IoT sensor technology used in manufacturing environment.Working ConditionsMust have all manufacturing safety training, Personal Protective Equipmentto be prepared to work on the manufacturing plant floor.5-10 hours of overtime per week.Occasional travel for training and meetings (3-5 times per year).Collaborate on assignments and projects with peers at other plants, Information Systems, Production and other MESD team members and regional teams.Ability to work varying shifts based on business needs and training requirements.What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Hourly Full-Time Function: Engineering Pay Range: $30.00 - $36.00 Target Bonus: 5.0% Req ID:26270 SummaryLincoln Electric Automation has an outstanding opportunity for a Mechanical Design Engineer. The Mechanical Design Engineer plays a key role supporting our team in the design, building, shipping, and service of Lincon Electric Automation products. A Mechanical Designer II typically works on one project at a time (typically creating new designs that are very close to reference designs) and is working under the direction of a Mechanical Designer or Project Engineer.In addition to competitive pay, Lincoln Electric offers an annual incentive plan, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoThe Mechanical Design Engineer will be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives with a focus on design and development. In addition you will:• Understand and gain knowledge needed to work in software systems. i.e. Solidworks • Provide mechanical layouts and details to production • Take initiative to meet challenging project timelines and budgets (hours and material) • Ensure required ISO documentation is completed • Assist in compiling electronic documentation for Service Manuals, updating design package to reflect status configuration of any critical item • Assure that product, as designed, is in conformance with quote and customer purchase order • Work well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functions • Provide small-scale mechanical layouts and detail prints to production • Assumes additional responsibilities and performs special projects in support of the Company’s 2025 Strategy • May support other roles as a cross-training opportunityEducation & Experience Requirements • Mechanical Engineer or Mechanical Engineering Technology degree required• 2 plus years of experience in manufacturing and design of industrial automated equipment desired • CAD (3D modeling) desired • Computer proficiency including spreadsheet, word processing and project softwareNonessential skills and experience: • Safety (OSHA STDS)Environmental, Health & Safety (EH&S): • Understand the Company’s EHS Policy and how it relates to this job • Be aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this job • Work in a safe and environmentally friendly manner and observe all company EHS procedures • Know that the company EHS procedures are located on the ISO drive • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures • Attend required EHS trainingPhysical demands and work environment: • Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. • Work environment: The noise level in the work environment is usually moderate.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job Purpose: Lead/Support investigation of moderately complex quality problems/change points for internal and external customers to identify cause, countermeasure, and product disposition.Key Accountabilities:Using engineering analysis and data collection to assure material conformance to spec and causes of product failureManage/participate in investigations for quality problems to determine responsibility, root cause and countermeasure through failure analysis of engine components and assembliesSummarization and presentation of analysis results to all levels of organization and other Honda divisionsAbility to communicate with customers and outside departments, and other regionsCoordinate and lead plant wide projects to identify Quality concerns and establish a team and set plan to investigate Quality concernsSupport/Advise/Mentor/Lead other associates on problem analysis projectsEstablish and carry out analysis plans on powertrain problems, by utilizing engineering theory/experience and interfacing with functional experts and other department representatives for coordination of schedules and activitiesEvaluate functional impact of manufacturing process and/or specification variationsQualifications, Experience, and Skills:Bachelors in Engineering or equivalent relevant experience2-8 years based on educationExperience in Quality, Manufacturing or Material AnalysisWorking Conditions:Moderate lifting of componentsWork environment - combination of office, test lab & manufacturing Analysis tools including hand-tools & test equipment5 hours OT/week, with need to work unexpected overtime as issues arise. Limited supplier and international travelWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeAct as Subject Matter Expert (SME) to Lead/Support multidisciplinary facility projects and systems (PLC, variable speed drive, motors, arc-flash, etc.) by successfully performing electrical engineering responsibilities. Specialty topics may include, but not limited to electrical utilities (supply and distribution, lighting, fire detection and alarm, etc.) Work with contractors to verify that the design and construction meet specifications, code, and performance expectations. Monitor progress and performance against the project plan; resolve operational problems, minimize delays, identify, develop, and gather necessary resources to complete the project.Analyses current operating conditions and recommends new preventative and proactive methods for maintaining and monitoring facilities systems. Evaluates facility standards and practices to improve maintenance procedures and ensure optimal operational efficiency. Involved in business planning process and long-term investment planning. Participates in the planning and installation of new facility systems and provides knowledge of maintenance, repair, and operations for various infrastructure, equipment, and building disciplines.Key AccountabilitiesUtility Management – Manage utility infrastructure reliability, capacity, and safety. Assess utility capacity versus demand and analyze operational trends. Plan and execute necessary utility outage activities, including appropriate customer communication and support. Evaluate new technology and manage system end-of-life characteristics, seeking opportunities for utility infrastructure innovation. Apply electrical and facilities expertise and facilitate the sharing of knowledge and best practice.Technical Project Management- Work with internal customers and external consultants, contractors, and suppliers to develop initial concept, specification, design, procurement scope, fabrication/construction, and installation-related documents. Communicate and work with department design team members, bringing technical expertise and knowledge to projects, and managing the overall execution of projects.Budget Management -- Maintain organizational budgets for capital investment and expense activities, such as maintenance and repair of facility assets and contracted support services. Budget responsibilities include formulating requests, tracking expenditures, analyzing trends, and adjusting budgets to address business needs.Contract Management -- Arrange and manage appropriate contracted services support, as needed. Ensure all work meets or exceeds defined organization targets. Manage work to ensure all deliverables comply with associated contract documents, codes and regulations, industry standards, and Honda standards, as applicable.Maintenance Coordination -- Prepare and execute preventative maintenance programs to ensure operational health and optimum uptime for assigned infrastructure, equipment, and building assets.Operations Support -- Utilize technical knowledge of electrical utility and infrastructure systems, project management, analytical decision-making, risk assessment, and troubleshooting/problem solving, to support facilities-related operations in order to meet or exceed organization metrics.Qualifications, Experience, and SkillsBachelor’s degree in Electrical Engineering, or related discipline, or equivalent combination of education and experience5+ years of related work experience based on educationKnowledge/Experience Required: Strong subject matter knowledge of industrial electrical utility and infrastructure systems (electricity supply and distribution, lighting, fire detection and alarm, etc.), through design, construction, maintenance, troubleshooting, and repair activities. Knowledge of building/campus facilities management and operations, including construction skilled trades.Knowledge / Experience Preferred: Professional Engineering (PE) license. Project management experience. Knowledge of building codes, governing regulations, and industry standards, such as NFPA, NEC, OSHA, EPA, and local building and utility-related codes. Knowledge of alternative energy sources, including solar and wind systems. Knowledge of industrial process equipment, including PLC, variable speed drive, and robotic systems. Experience with Maximo asset management system software. Electrical system modelling using SKM or similar program.Skills Required: Effective oral and written communication and presentation skills; customer focus (building productive relationships); Microsoft Office (Word, Excel, PowerPoint), Microsoft Project, and AutoCad/Revit capabilities.Demonstrated Abilities: Effective communication of ideas to gain consensus from individuals or teams. Technical proficiency with expertise on some of the topics within area of expertise. Balancing multiple projects simultaneously. Comprehending technical drawings and specifications. Planning and executing special projects and reporting. Working well in a collaborative environment.Honda Factors: Ability to balance the wants/needs of the customer with Facilities operational requirements. Knowledge of Honda project flow, budgeting, and cost reporting. Project tracking and reporting for PDCA development.Working ConditionsOffice, plant manufacturing area, mechanical/electrical equipment room, and test environments.Willingness to travel for equipment confirmation, department reviews, and business planning events.Ability to work overtime, as needed, to complete tasks.Work all appropriate weekends/shutdowns to manage projects and cover operational needs.What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationAnna, OhioJob PurposeWork as part of a multi-discipline team to introduce and implement equipment required for new model introduction into Honda facilities. By leveraging 3D CAD software and simulation tools, they will need to identify key change points and summarize into a specification that fixes design requirements. This individual will be asked to drive forward projects and activity as functional Project Leader, PIC, or Subject Matter Expert, from inception through the handoff to final design/assy. They will be asked to focus on characteristic improvements, which align with the Business Unit strategy and regional goals. They will be asked to collaborate with the design team and plant members in order to achieve required quality, cost, and safety criteria.Key AccountabilitiesDevelopment of optimal machine concepts for any process characteristic change; by utilizing fundamentally sound engineering principlesLead and drive forward projects as Process Leader or subject matter expert. This includes receiving and linking directly to development (DO) and standards (MSS) functionsFunctionally act as direct project leaders for small/midsized business plan projects, driving forward the project from an engineering perspectivePerform detailed process studies of new model car part to understand machine capability, feeding back issues to car part designers as needed.Creation of Specification documentation to summarize changepoints, establish criteria and process/part flowOnline support during the installation phase of the project, linked to verifying spec criteriaCreate and maintain a critical path schedule to maintain overall project milestonesQualifications, Experience, and Skills4-year Bachelor of Science degree in Mechanical or Industrial Engineering or 2-year Engineering degree with related experience.4 years of Engineering experience linked to equipment concept/design/support or other production related fieldKnowledge of 3D CAD systems and softwareBackground in automated equipment developmentExcellent technical communication skills (both written and oral)Workstyle85% Office environment – creation of specification documentation. 15% Manufacturing floor – direct line side investigation / system-up support / verification at any Honda facilityMust be willing to travel locally, regional, and internationally as required on a project basis (to Honda facilities or external equipment vendors).What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeLeads, creates, and implements innovative technical activities and solutions in the areas of Business Plan, New Model, and Mass Production to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost and Morale characteristics targets.Key AccountabilitiesDevelop, implement, and maintain methods, operation sequence, and processes in the manufacturing or fabrication of parts, components sub-assemblies, and final assemblies.Review and analyze daily report(s) to identify SQD potential countermeasures and /or root cause analysis opportunities and strive for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense.Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines/Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, & SkillsBSME / BSMET / BSEE / BS Manufacturing Engineering or equivalent experience2-8 years of relevant experience based on educationComputer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilitiesDemonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost.Strong technical analysis and troubleshooting skillsAbility to manage projectsKey Performance IndicatorsAchievement of project targetsTimely execution of business plan themesPlan vs. Actual of budget within production areasCommunication and Working RelationshipsProduction engineering, associates, line support staff, managers, and up/down stream departments: communicate project and countermeasure needs and activity. Department and plant management: communicate project status and evaluationsSuppliers, contractors, service providers – research and communicate project specifications, installation requirements, and general activities needed to enhance operationsDecisions ExpectedFollow-up on daily line performance and countermeasure areas of concernDevelop / Design strategy to achieve unit and company initiativeLeadership and development of other levels / ability to challengeLead and evaluate business planning (Justification for resource changes)Determine budget and schedule activity needed to improve operationsJob CompetenciesLeadership and communication capabilities to work with all levels of associates. (both written & oral).Project management must be demonstrated with knowledge and understanding of E-Flow experience.Ability to solve complex problems through analysis and propose / implement appropriate countermeasures.Aligns planning and goal setting to the company vision.Demonstrates interest in new ideas and technology through openness and accessibility.Ability to lead and manage associates in multiple areas simultaneously.Ability to work through communication barriers.Ensures continuous improvement processes and targets are implemented.Considers customer viewpoint in decision making process.Working ConditionsWork in production environment requiring PPE and lockout in manufacturing operationsWorking near oils, cutting lubricantsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per weekPossible weekend or off-shift support as necessaryTravel 5% (domestic & international)Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThe Manufacturing Engineer will lead, create, and implement innovative technical activities and solutions in the areas of Mass Production, Business Plan and New Model to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost, and Morale characteristic targets. Key AccountabilitiesEffectively communicate upstream and downstream to all levels of the organization to assure common understanding and direction.Review and analyze daily report(s) to identify safety, quality, delivery gaps and develop potential countermeasures and /or root cause analysis opportunities striving for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense. Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement.Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, and SkillsBachelors or associates degree in engineering or engineering technology with relevant experience (Mechanical, Manufacturing, Industrial, or Electrical, etc) with interest in Manufacturing6 years engineering experience required in lieu of a degreeManufacturing co-op/ internship experience preferredComputer literate to support industry standard software applicationsPositive attitude, open minded, and a team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and ability to provide and set direction for others to be successfulDemonstrates leadership capabilities Strong communication (verbal/written) skillsAbility to multi-task and solve complex problems through analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsWorking ConditionsWork in production environment requiring PPE and lockout in manufacturing operationsManufacturing environment with the potential of working near hydraulic oils, cutting lubricants, ferrous and aluminum materialsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, automation equipment, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per week possiblePossible weekend or off-shift support as necessaryTravel 5% (domestic & international)What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeLeads, creates, and implements innovative technical activities and solutions in the areas of Business Plan, New Model, and Mass Production to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost and Morale characteristics targets.Key AccountabilitiesDevelop, implement, and maintain methods, operation sequence, and processes in the manufacturing or fabrication of parts, components sub-assemblies, and final assemblies.Review and analyze daily report(s) to identify SQD potential countermeasures and /or root cause analysis opportunities and strive for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense. Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines/Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, and SkillsBSME / BSMET / BSEE / BS Manufacturing Engineering or equivalent experience2-8 years of experience as an engineering staff in a manufacturing environment or other relevant manufacturing experienceComputer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilities Demonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsDecisions ExpectedFollow-up on daily line performance and countermeasure areas of concernDevelop / Design strategy to achieve unit and company initiativeLeadership and development of other levels / ability to challengeLead and evaluate business planning (Justification for resource changes)Determine budget and schedule activity needed to improve operationsWorking ConditionsWork in production environment requiring PPE and lockout in manufacturing operationsWorking near oils, cutting lubricantsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per weekPossible weekend or off-shift support as necessaryTravel 5% (domestic & international)Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.