FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Req ID:455238Address: 6457 Old Salem Rd NE Albany, OR, 97321Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

About the Role: The Sr. Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You’ll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers.Location Details:This position will ideally be located in Troutdale, OR.Travel Details: This position requires travel throughout Northern California, Oregon, and Washington states, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. A company vehicle and fuel card will be provided. When travel is required, meals and lodging will also be provided.Company OverviewWith roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally.Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy.Essential FunctionsThis is considered an advance-level skilled or career level positionPerform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situationsPerform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedulesFrequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional mannerMay provide oversight for less experienced mechanicsPerform routine and preventive maintenance, inspections, and repairsIdentify mechanical problems either visually or with computer diagnostic equipmentMaintain records of time and materials used on each job, the condition of the equipment, and the repairs performedTrack information in computer software; ensure repair orders and weekly timesheets are complete and accurateConduct safety inspections of equipment and prepare safety documentationWork in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as requiredParticipate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirementsOther duties as assignedRegular and predictable attendanceEssential functions of this position are to be performed at a Company-designated office or field locationUnderstand and comply with the Company’s Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: QualificationsMust have five years of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience.Must be capable of operating company vehicles and equipment on a daily basis. Clean Motor Vehicle Record (MVR) and good DAC Report.A valid Class B Commercial Driver License (CDL) is desired but not required.Must be at least 18 years of age.High School Diploma or equivalent preferred but not required.Knowledge/Skills/AbilitiesMust be reliable and have a strong work ethicProven ability to work independently and without direct supervisionGood teamwork skills to work effectively with coworkersAbility to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily logBasic computer or data entry skillsSolid experience using mechanical tools, materials, and testing equipmentSolid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipmentAbility to follow posted safety rules and safe operating proceduresGood understanding of applicable regulatory guidelines and rulesPhysical Requirements/Working ConditionsMust be reliable and have a strong work ethicProven ability to work independently and without direct supervisionGood teamwork skills to work effectively with coworkersAbility to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily logBasic computer or data entry skillsSolid experience using mechanical tools, materials, and testing equipmentSolid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipmentAbility to follow posted safety rules and safe operating proceduresGood understanding of applicable regulatory guidelines and rules What We Offer: Compensation & BenefitsSalary $66,560-$83,200 / yearCommensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate.Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) -$15 weekly premium for employee or employee plus family coverage.Dental – 100% employer-paid premium.ThrivePass Health & Wellness Reimbursement Program- $300 quarterly, $1,200 annually for health and wellbeing-related purchases.AnnualPaid Time Offstarting at15 days plus 10 paid Holidays(Cultural Celebration Day is a floating holiday).Generous401(k) Plan with100% match up to 6%; immediate vesting, andAnnual profit-sharingpotential.Superior educational assistance program(support for educational costs, internal training, and more!).Company-paid short and long-term disability, life, and accidental death & dismemberment.Company-paid business travel accident insurance.Employee Assistance Plan (EAP).Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents.Tool/boot allowance ($250 per quarter).Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-.MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees.MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer.MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Location Expansion #: #nw LinkedIn Workplace: #LI-Onsite

TIG Welder I - Titanium Aerospace Parts Production - Swing Shift If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: The Welder I role TIG welds in a chamber under argon atmosphere on titanium castings for the aerospace industry. Duties and Responsibilities: Titanium TIG welding in chamber to repair castings, following all applicable procedures.Using tools such as calipers, profile templates, etc., to accurately repair castings.Working with your team on rework plans to make castings conform to specification.Using grinder to shape tungsten.Load and unload castings from chamber.Keep equipment and work area clean and orderly.Other duties as assigned. Minimum Qualifications and Experience: Completion of formal vocation program or prior TIG welding experience (1-2 years) preferred. Must pass welding test within 4-6 weeks of being in position. Must pass an annual eye exam.This position requires ability tobend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations.Must have basic high-school level math skills including addition, subtraction, multiplication, and division.Able to use small, fine tools.Good attendance record required.Requires continuous mental and/or visual attention to detail.Able to understand measurements; read and use measurement tools correctly.Able to work as a team player and be self-motivated.Able to read, understand, and follow written and verbal instructions.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employment and periodic drug screening.U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Swing Shift - Monday-Thursday ($1.00/hr. shift differential)Weekend Day Shift - Friday-Sunday ($1.25/hr. shift differential) Relocation assistance may be available to qualified candidates. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineeredcomponents and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

Student/Recent GraduateTIG Welder If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Looking for current welding program students, those soon to graduate and recent graduates.The Welder I TIG welds in a chamber under argon atmosphere on titanium castings for the aerospace industry. Duties and Responsibilities: Titanium TIG welding in chamber to repair castings, following all applicable procedures.Using tools such as calipers, profile templates, etc., to accurately repair castings.Working with your team on rework plans to make castings conform to specification.Using grinder to shape tungsten.Load and unload castings from chamber.Keep equipment and work area clean and orderly.Other duties as assigned. Minimum Qualifications and Experience: Current enrollment in or recent completion of formal welding vocation program required.All others will be disqualified for this position but may be considered for other positions.Must pass welding test within 6weeks of being in position. Must pass an annual eye exam.This position requires ability tobend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations.Must have basic high-school level math skills including addition, subtraction, multiplication, and division.Able to use small, fine tools.Good attendance record required.Requires continuous mental and/or visual attention to detail.Able to understand measurements; read and use measurement tools correctly.Able to work as a team player and be self-motivated.Able to read, understand, and follow written and verbal instructions.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer preferred.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employment and periodic drug screening.Regular and reliable attendance required. Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Depending on current enrollment status of candidate. Part-time schedulesavailablefor students. Full-time schedule is typically swing or weekend shift.Overtime available based on business needs. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay fromPay from $35.00- $60.00/hourSign-on bonus up to $5,000.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, electrical and mechanical control devices in a safe, efficient and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, work orders to the necessary department in a timely manner.Provides support by picking up, delivering and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: Minimum 5-7 years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift up to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Service Tech, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, specialty, hotside, hot side, Hstech, HVACR, cooking equipment, restaurant, kitchen, appliance

PAPE’ MATERIAL HANDLING, INC. – EUGENE, OR JOURNEYMAN FIELD SERVICE TECHNICIAN / MECHANIC: Do you love working on equipment and turning wrenches Are you looking to grow your skills as a mechanic Are you looking for not just another job, but a career Pape’ Material Handling, the premier capital equipment dealer in the West, is seeking Field Service Technicians to join their team in Eugene, OR. At Pape’, you can count on us to invest heavily in your Technician career through training, resources, and support. We want to see you grow your skill set and experience, and in turn, provide excellent compensation, work-life balance, and benefits for you and your family. Come join our team! WHAT YOU’LL DO: As a Journeyman Field Technician, you will work on material handling equipment at customer locations to ensure that their equipment is running in peak form and maximizing uptime. Being a journeyman, we will count on you when a tough job needs to get done. Every day, picture yourself traveling the area in a fully loaded Pape’ service vehicle, performing top-notch work on equipment, interacting with customers, and knowing that they can count on you to get the job done right. WHAT YOU NEED: 5 or more years of experience diagnosing and repairing all brands of material handling equipment.Basic computer knowledge.Self-motivation and assertiveness.Ability to work under little or no supervision.Excellent communication and customer relations skills.Driver’s license with a good driving record. Must provide own tools. Compensation: $30+/hr (Depending on Experience) Why work for Pape’: Competitive pay based on your skills, training, and experience level.Outstanding benefits including –401(k) & Roth 401(k) Retirement Plans with Company Match; Medical, Dental, Vision and Prescription Insurance; Flexible Spending Accounts (Flex Plans); Life Insurance; Short- and Long-Term Disability Insurance; Employee Assistance Program; Online and Instructor-Led Training; Tuition Reimbursement for Training Programs.Progressive Vacation Plans, Sick Leave & Paid Holidays – Members receive 80 hours of vacation (First year is prorated for new hires based on start date), 40 hours of Sick Leave, and 7 paid holidays each year. Pap vacation plans also have tiers based on your seniority, so as your seniority grows, your vacation time off does as well.Advancement– Pape’ is a dynamic, growth-oriented organization with a focus on promoting from within. Stability and reputation Pape’ is a family-owned, fourth-generation company with over 160 locations, over 4,500 members and 85 plus years of experience. Pape’ is known for their stability, honesty and integrity.Equipment– We have the largest equipment inventory in the West and an unparalleled parts inventory!Employee impact– Enjoy an open-door policy where your voice will be heard and your opinions will matter.Training– You will be provided with training and mentoring to prepare you for your role and continued learning to grow your skills. The Pape’ Group maintains a drug-free workplace and as such, requires candidates to successfully pass a pre-employment drug test.Licenses & CertificationsRequiredDriver LicenseEqual Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Req ID:455051Address: 6457 Old Salem Rd NE Albany, OR, 97321Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!Maintenance Technicians play a crucial role in our operations by ensuring a safe, clean, and well-maintained environment. Additionally, you'll assist your manager in maintaining smooth operations to swiftly serve our customers. Your dedication significantly contributes to our customers' satisfaction and desire to return. No experience No problem! We will teach you!Job Functions:This is a customer-facing position with general customer service duties including, but not limited to, providing assistance, resolving issues, and ensuring a positive customer experience.Assisting store, restaurant, and truck care departments with general cleaning, maintenance, stocking, and customer service needs.Use of various tools and equipment to clean and maintain the overall facility operations to include, but not limited to, equipment repair and maintenance (HVAC systems, fuel systems, service trucks, refrigeration systems, etc.), pressure washing, plumbing repair, site inspections, and other assigned duties.Additional duties could include cross-training in other departments such as Store Cashier, Restaurant Cashier, Facility Maintenance, and Leadership Roles.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Ability to move, lift 25+ pounds. Ability to work in various temperatures.Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Millwright Electrician - Aerospace Industry - Weekday/Weekend Graveyard ShiftPrimary Purpose: The Maintenance Millwright/Electrician implements and expedites general maintenance functions, preventative maintenance and repair of manufacturing equipment, and improvement of the facilities. Depending on licensing, it may include electrical, pneumatic, vacuum, hydraulic, and mechanical systems.Duties and Responsibilities: Perform installation, service, and repairs to buildings, facilities, and grounds including, but not limited to: doors, windows, structure and supports, guard rails and fencing, air handling and exhaust units, equipment foundations, and pavement.Install service, troubleshoot, and repair all types of machine control components, power transmission components, and hydraulic systems.Install and setup of manufacturing equipment.Ensure operation of mechanical equipment by completing preventive maintenance requirements on machining lathes and mills, motors, pneumatic tools, and production equipment; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.Locate root cause of problems by using sound troubleshooting methods to ensure that permanent repairs can be made to minimize costly downtime.Use all required hand and power tools including, but not limited to: drill, saw, torch, and jacks, as well as ladders, cranes, high lift, and other maintenance equipment.Perform welding and fabrication of custom parts or to repair equipment to original condition.Maintain clear communication with supervisor and with production regarding equipment status of repair, and release to production.Provide proper record keeping, documentation, and information for, but not limited to; Machine, equipment and facility files.Maintain equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt.Operate and/or maintain a variety of Tools and equipment.Must be familiar with the scope and limitation of the state licensing requirements in Millwright and Electrical work.Other duties as assigned. Minimum Qualifications and Experience: Basic computer skills.Demonstrated ability to follow all established safe work procedures including, but not limited to personal protection equipment, safety lockout/tag-out, confined space, and elevated work areas.Use all required hand and power tools including, but not limited to: drill, saw, torch, and jacks, as well as ladders, cranes, high lift, and other maintenance equipment.Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employment and periodic drug screening. Must have some combination of Electrical and Millwright experience, knowledge, or licensing. Examples include but are not limited to: Electrical: Must have ability to trouble shoot and repair electrical installations and equipment effectively.Demonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, power transmission, pumps.Oregon LME, PJ, PS, or J Electrical license required (or actively in process) Millwright: Experience in an industrial maintenance or millwright setting, with working knowledge of hydraulic, pneumatic, and mechanical systems preferred.Requires working knowledge of blueprints, technical part manuals and their application. This may include electrical and mechanical diagrams, gages, meters, calipers and other measuring tools.High School diploma or GED preferred Schedule: Weekday Night Shift (4x10) $1.00/hour shift differentialWeekendGraveyard Shift (3x12) $2.50/hour shift differentialOvertime offered based on business needs Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

Student/Recent GraduateTIG Welder If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Looking for current welding program students, those soon to graduate and recent graduates.The Welder I TIG welds in a chamber under argon atmosphere on titanium castings for the aerospace industry. Duties and Responsibilities: Titanium TIG welding in chamber to repair castings, following all applicable procedures.Using tools such as calipers, profile templates, etc., to accurately repair castings.Working with your team on rework plans to make castings conform to specification.Using grinder to shape tungsten.Load and unload castings from chamber.Keep equipment and work area clean and orderly.Other duties as assigned. Minimum Qualifications and Experience: Current enrollment in or recent completion of formal welding vocation program required.All others will be disqualified for this position but may be considered for other positions.Must pass welding test within 6weeks of being in position. Must pass an annual eye exam.This position requires ability tobend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations.Must have basic high-school level math skills including addition, subtraction, multiplication, and division.Able to use small, fine tools.Good attendance record required.Requires continuous mental and/or visual attention to detail.Able to understand measurements; read and use measurement tools correctly.Able to work as a team player and be self-motivated.Able to read, understand, and follow written and verbal instructions.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer preferred.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check. Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Depending on current enrollment status of candidate. Part-time schedulesavailablefor students. Full-time schedule is typically swing or weekend shift.Overtime available based on business needs. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

TIG Welder - Titanium Aerospace Parts: Prior Experience Required If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: This welder position requires the candidate to TIG weld in a chamber under argon atmosphere on titanium castings for the aerospace industry.Prior experience welding titanium is required. Duties and Responsibilities: Titanium TIG welding in chamber to repair castings, following all applicable procedures.Using tools such as calipers, profile templates, etc., to accurately repair castings.Working with your team on rework plans to make castings conform to specification.Using grinder to shape tungsten.Load and unload castings from chamber.Keep equipment and work area clean and orderly.Other duties as assigned. Minimum Qualifications and Experience: Completion of formal vocation program or more than 1 year of prior TIG welding experience is required.Must pass welding test within 4weeks of start date. Must pass an annual eye exam.This position requires ability tobend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations.Must have basic high-school level math skills including addition, subtraction, multiplication, and division.Able to use small, fine tools.Good attendance record required.Requires continuous mental and/or visual attention to detail.Able to understand measurements; read and use measurement tools correctly.Able to work as a team player and be self-motivated.Able to read, understand, and follow written and verbal instructions.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employmentdrug screening. Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Weekend Day Shift (Friday-Sunday 5:00am-5:30pm) - $1.25/hr. shift differentialSwing Shift (Monday-Thursday 3:30pm-2:15am) - $1.00/hr. shift differentialOvertime offered based on business needs Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineeredcomponents and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

Journeyman Electrician/Millwright - Titanium Aerospace Parts Manufacturing- Swing Shift, Weekend Day Shift, and Weekend Graveyard Shift If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: The Maintenance Millwright/Electrician implements and expedites general maintenance functions, preventative maintenance and repair of manufacturing equipment, and improvement of the facilities. Depending on licensing, it may include electrical, pneumatic, vacuum, hydraulic, and mechanical systems. Duties and Responsibilities: Install, setup, service, troubleshoot, repair, and maintain all types of machine control components and power transmission components with the support of Plant Supervising Electrician, for reliability of many types of industrial manufacturing equipment.Diagnose malfunctioning systems and components, using test equipment and hand tools to locate the cause of the breakdown and correct the problem.Locate root cause and repair mechanical and electrical systems using sound troubleshooting methods to ensure that permanent repairs can be made to minimize costly downtime.Ensure operation of mechanical and electrical equipment by completing preventive maintenance requirements on machining lathes and mills, motors, pneumatic tools, and other production equipment; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.Use all required hand and power tools including, but not limited to; drill, saw, torch, and jacks, as well as ladders, cranes, high lift, and other maintenance equipment.Preferred; Ability to perform welding and fabrication (torch, mig, stick) of custom parts or to repair equipment to original condition.Maintain clear communication with supervisor and with production regarding equipment status of repair, and release to production.Provide proper record keeping, documentation, and information for, but not limited to; Machine, equipment and facility files.Perform installation, service, and repairs to buildings, facilities, and grounds including, but not limited to; doors, windows, structure and supports, guard rails and fencing, air handling and exhaust units, equipment foundations, and pavement.Maintain equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt.Operate and/or maintain a variety of Tools and equipment.Must be familiar with the scope and limitation of the state licensing requirements in Electrical work.Arc flash, forklift, and arial platform training/experience a plus.Other duties as assigned. Minimum Qualifications and Experience: Electrical: Must have ability to trouble shoot and repair electrical installations and equipment effectively.Demonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, power transmission, pumps. Millwright: Preferred; Experience in an industrial maintenance or millwright setting, with working knowledge of hydraulic, pneumatic, and mechanical systems preferred.Requires working knowledge of blueprints, technical part manuals and their application. This may include electrical and mechanical diagrams, gages, meters, calipers and other measuring tools.Oregon PJ, PS, or J Electrical license required.High School diploma or GED preferred. General: Basic computer skills.Demonstrated ability to follow all established safe work procedures including, but not limited to personal protection equipment, safety lockout/tag-out, confined space, respiratory, and elevated work areas.Use all required hand and power tools including, but not limited to: drill, saw, torch, and jacks, as well as ladders, cranes, high lift, and other maintenance equipment.Must have some combination of Electrical and Millwright experience, knowledge, or licensing. Examples include but are not limited to: Schedule: Swing Shift - Monday-Thursday ($1.00/hr. shift differential)Weekend Day Shift - Friday-Sunday($1.25/hr. shift differential)Weekend Graveyard Shift - Friday-Sunday($2.50/hr. shift differential)Must be available to handle weekend and emergency calls on a rotating basis.Overtime is required as needed. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). This is a full time position

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Millwright - AerospaceParts Manufacturing- Monday-Friday Day Shift If you would love to be part of a company that is poised for substantial growth with opportunities for advancement then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: A Millwright will perform routine preventive maintenance and troubleshoot problems and make repairs throughout the manufacturing plant; install machinery; repair damaged machinery; align gears and attach motors; connect belts; reading blueprints; lubricating equipment and other duties related to maintenance and facilities as assigned. Duties and Responsibilities: Perform routine preventive maintenance and repairs throughout manufacturing plant.Install machinery.Repair damaged machinery. Align gears and attach motors.Connect belts.Reading blueprints.Lubricate equipment and other duties related to maintenance and facilities as assigned. Minimum Qualifications and Experience: Vocational training and on-the-job training (or any combination thereof) totaling at least 4 years.Mechanical drawing ability.Mechanical trouble-shooting experience. Welding and fabrication skills.Able to understand and follow verbal and written instructions and procedures. Possess good communication skills at all levels within the organization. Able to interact effectively with co-workers and supervisors in a positive manner.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Limited Maintenance Electrician License (LME) preferred.Able to push/pull/lift up to 50 lbs with or without reasonable accommodations.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer. Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employment and periodic drug screening. Schedule: Must be available to handle weekend and emergency calls on a rotating basis.Overtime is offered based on business needs Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Maintenance Supervisor - Day Shift If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: The Maintenance Supervisor reports to the MaintenanceManager and is responsible for leading plant maintenance and maintenance project teams to build on the reliability programs, maintain the facilities, and improve the business. This role will drive the company’s efforts toward world class reliability. Duties and Responsibilities: Supervises maintenancepersonnelto effectively maintain industrial manufacturing equipment and facilities on a 7-day per week, 24-hour basis.Providesfunctional and economical solutions foroperations and maintenance through improvement of plant safety, reliability, efficiency, and regulatory compliance in a responsible and progressive manner.Managesexpensesand projectbudgets to meet business operationalplans.Createsa positive, proactive, and passionate culturethat motivates theteamtoachievegoals that support the business.Plans for continuous career development and training of personnel to meet business needs in the maintenance department.Selects, hires, trains, develops,leadsand directsmaintenancepersonnel to accomplish business objectives.Fostersemployee engagement by promotingaproblem-solving cultureand ensuring that business and operational goals are effectively communicated to employees.Leveragescontinuous improvement and new/innovative technologies as part of an integrated approach to reducingequipment/process cost without sacrificing quality.Reliability tools and techniques such as vibration analysis, infrared scanning, planning and scheduling jobs, preventive/predictive/condition-basedwork.Manages Life Threatening Programs such as Lockout/Tagout,Confined Space, and Fall Protection.Oversees plant mechanical, electrical and control systems.Safety and continuous improvement tools such as problem solving, hazard abatement, improvement, and waste elimination.Maintains maintenance/facilities for reliability in a manufacturing setting such as preventive/predictive.Project management in a manufacturing setting including equipment installations and major equipment repairs with necessary close coordination with the operations team and outside vendors to ensure minimal impacts.Problem-solving and decision-makingto consensus within a team setting.Separating strategic and tactical work, and the ability to move between.Trend analysis and review of work content to identify upcoming issues.Presenting information, both technical and non-technical, toall levels of the organization.Parts stocking strategy including Min/Maxassessment.Demonstrating diplomacy and tact towork effectively with diverse groups and individuals.Strong interpersonal,verbaland written communication.Computer and software proficiency,including MS Office applications.Understand, communicate, and facilitateCPP's mission, vision, and values.Lead directly and indirectly and seek consensus/alignment across a team.Exhibit attention to detail, organization, and astrong sense of accountability.Exhibit a positive team-oriented service philosophy.Solid job history including more than 1 year at previous or recent employer.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employment and periodic drug screening. Minimum Qualifications and Experience: Bachelor's degree inEngineeringand at least 1 year of experience in an industrial maintenance leadership role – OR – 6 years of experience in an industrial maintenance leadership role.At least 2 years of direct project management experience, such as capital, major maintenance, or equipment installations.At least 1 year of reliability program experience, such as preventive/predictive maintenance, lubrication, or infrared inspections.At least 1 year of experience of departmental budget management.Demonstrated experience in a demandingfast-pacedenvironment. Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Primarily on days, but may require occasional off shift or weekend responsibilities.Salaried Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a full time position