We are looking for an experienced Traffic Control Technician to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer Growth Potential
Qualifications: Valid Driver’s License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, gender, national origin, disability, or veteran status.

We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Work Together, Succeed Together – Maintenance Technician Needed! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws.Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $18.00-$22.00 /hr.Up to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC6140 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $85,000Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.Project areas in scope:Inservice InspectionInservice TestingValue ProgramsFire Protection and FLEX ProgramsMINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group. As responsibility increases within the organization

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Company:US3063 Sygma Pennsylvania (The Sygma Network, Inc)Sales Territory:NoneZip Code:17110Travel Percentage:0COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factorsJOB SUMMARYTo provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability.MONDAY TO FRIDAY 11:00PM TO 7:30AM$27.00 TO $35.00 PER HOUR BASED ON EXPERIENCE$600 ANNUAL TOOL ALLOWANCERESPONSIBILITIESPerform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.Perform FAI/CVI (First Article Inspection/Commercial Vehicle Inspection) (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment by all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment.Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer).Address all Driver Vehicle Inspection Report write ups timely, and efficiently.Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.Follow procedures including documenting all work performed on work orders.Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility.May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible.Proficient in electrical meter testingKnowledge of controls and electric (DC low voltage)Electric motor knowledge (DC)Complete electrical repairs and welding projects as needed.QUALIFICATIONSEducationMedium/Heavy Duty truck technical training 2-year schoolHigh school diploma or GED requiredExperience4 years of experience OR5 years of experience in fleet maintenance and repairCurrent and valid driver’s license (CDL Preferred, Not Required)Professional SkillsAnnual Inspector Certification Knowledge, Skills and AbilitiesBrake Inspector Certification Knowledge, Skills and AbilitiesASE certifications – Automotive or Medium/Heavy Duty Trucks (preferred not required)EPA section 608 (Core & Type II) and 609 HVAC – Refrigeration CertificationWorking knowledge of computer-based diagnostic software for OEM’s and component manufacturersExpert knowledge and skill of all vehicle systems and componentsExpert knowledge and skill in diagnosis and repair of electrical systems on all equipmentExpert knowledge and skill in diagnosis and repair of refrigeration systems (Expert knowledge and skill in Preventive Maintenance Inspections and repairModerate knowledge and skill in welding and cutting (gas, electric, MIG, TIG)Moderate computer skills and knowledgeExpert knowledge of all DOT (FMCSA) regulationsModerate knowledge of OSHA safety regulationsModerate knowledge of environmental regulationsPhysical DemandsRegularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear.Frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.Occasionally required to sit and must frequently lift and/or move up to 100 lbs.Requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.Ability to operate various pieces of equipmentAbility to stand, sit, walk, bend, reachAbility to push/pullAbility to lift /carryAbility to grasp toolsAbility to perform Repetitive motion: wrenches and hand toolsWorking conditions: Frequently works outdoors.Work EnvironmentOccasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.Works non-traditional business hours including evenings, nights, weekends, holidays and on-call.Occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).Occasionally exposed to high, precarious places and confined spaces.Occasionally exposed to fumes or airborne particles.The noise level in the work environment is usually moderate.BENEFITS INFORMATION:For information on Sysco’s Benefits, please visit https://SyscoBenefits.comOVERVIEW:Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations.We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service.AFFIRMATIVE ACTION STATEMENT:Applicants must be currently authorized to work in the United States.We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law.This opportunityis available through Sysco Corporation, its subsidiaries and affiliates.

$22.00/hourUp to $1,750 Retention BonusShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are as passionate about cars as we are. Whether you have recently graduated from a tech school or worked in a manufacturing warehouse, auto garage or auto dealership, this job might be a great fit for you! Become a member of our Avis Budget Group enterprise.What You’ll Do:You will perform preventative maintenance functions and light repairs on our auto fleet of vehicles. This includes oil, fluid, tire changes, repairs, rotations, and other basic light repairs, all in a safe manner. Depending on your experience, you may be assigned to assist our experienced auto mechanics.Perks You’ll Get:Bi-weekly pay (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive or mechanical abilities, help to obtain ASE CertificatesPaid time offMedical, dental, and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License At least 6 months auto maintenance experience (ability to acquire 1 ASE certificate within first year)Comfortable working in a mechanical shop with moderate or loud noise levelsBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotely6 months auto maintenance or auto tech school degree a bonus!Who We Are:Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group.PhiladelphiaPennsylvaniaUnited States of America

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35 - $40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: AggregatesThe Plant Maintenance Technician is responsible for ensuring the optimal performance, safety, and reliability of all plant equipment and machinery. This role involves conducting routine inspections, performing preventative and corrective maintenance, and troubleshooting mechanical, electrical, and hydraulic issues. The technician will work closely with production teams to minimize downtime and ensure that all maintenance activities are performed in compliance with safety regulations and company standards.About UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine maintenance and repairs on plant equipment.Troubleshoot mechanical issues and implement solutions.Ensure compliance with safety standards and regulations.Collaborate with team members to optimize plant operations.Maintain accurate records of maintenance activities.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Proficiency in using hand and power tools.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$29.55 per hour.Benefits through the Union for Medical, Dental, Vision and Pension.Union paid vacation, sick leave and holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Employee Type:Full timeLocation:PA WomelsdorfJob Type:Production MaintenanceJob Posting Title:Maintenance Manager About Us : TreeHouse Foods (NYSE: THS) is a leading manufacturer of private label packaged foods and beverages, operating a network of over 20 production facilities and several corporate offices across the United States and Canada. At TreeHouse Foods, our commitment to excellence extends beyond our products and revolves around our people. We are investing in talent and creating a performance-based culture where employees can do their best work and develop their careers, directly impacting our mission to make high quality, affordable food for our customers, communities, and families. We hope you will consider joining the team and being part of our future.Named one of America's Best Large Employers by Forbes Magazine, we are proud to live by a strong set of values and strive to "Engage and Delight - One Customer at a Time." Guided by our values-Own It, Commit to Excellence, Be Agile, Speak Up, and Better Together. We are a diverse team driven by integrity, accountability, and a commitment to exceptional results. We embrace change, prioritize continuous learning, and foster collaboration, transparency, and healthy debate. Together, we set each other up for success to achieve enterprise-wide goals. What You G ain : Competitive compensation and benefits program with no waiting period - you're eligible from your first day!401(k) program with 5% employer match and 100% vesting as soon as you enroll.Comprehensive paid time off opportunities, including immediate access to four weeks of vacation, five sick days, parental leave and 11 company holidays (including two floating holidays).Leaders who are invested in supporting your accelerated career growth, plus paid training, tuition reimbursement and a robust educational platform - DevelopU - with more than 10,000 free courses to support you along the way.An inclusive working environment where you can build meaningful work relationships with a diverse group of professionals. Take advantage of opportunities to build on our team-oriented culture, such as joining one of our Employee Resource Groups.Access to our wellness and employee assistance programs.Job Description: About the Role: As a Maintenance Manager, you will be a key player in providing leadership and strategic direction for the production maintenance group, at the Womelsdorf, PA, plant, a manufacturer of quality confections.This role will provide maintenance leadership to deliver a world-class operation. Lead, motivate, and develop employees to achieve outstanding manufacturing results, while leveraging Continuous Improvement (TPM) tools, improving individual skills, and enhancing teamwork. You'll add value to this role by performing various functions including, but not limited to: Playing a leading role in ensuring a safety-first culture through actively supporting the site's health and safety program in addition to ensuring that all Food Safety and Quality guidelines are followed.Responsible for leading the maintenance department as the Plant Progressive Maintenance Pillar leader.Driving standards and consistency across the maintenance department. Function as a technical and business resource in areas of system operations and production requirements.This position requires considerable interaction with plant floor personnel, leadership team, engineering, external support, and vendors.Supports the role of Project Manager for annually allocated capital budget to help grow business, improve operational efficiency, and improve site infrastructure and support site safety and quality projects.Providing coaching, training, feedback and mentorship to maintenance technicians, coordinators, and admin staff. Important Details: This is a full-time, on-site role on the First Shift. Occasional flexibility is required to support alternate shifts. You'll fit right in if you have: Bachelor's degree in engineering or related field is preferred.Five years or more in a technical management or supervisory role within food manufacturing industry is required.Strong knowledge of electronics, controls, mechanical and electrical components found in food manufacturing machinery as well as proper safety standards for food production equipment.Experience in creating, executing, and monitoring manufacturing technical standards and procedures.Knowledge of lean and six sigma techniques and tools are an asset.Experience in the use of a computerized maintenance management system (CMMS) to successfully run a maintenance department; knowledge in SAP Plant Maintenance a plus.Demonstrated problem solving, leadership, and analytical skills.Proficiency in Microsoft Office, SAP and maintenance management software. Your TreeHouse Foods Career is Just a Click Away! Click on the "Apply" button or go directly to www.treehousefoods.com/careers to let us know you're ready to join our team! At TreeHouse Foods, we embrace diversity and inclusion for innovation and growth. We are committed to building inclusive teams and an equitable workplace for our employees to bring their true selves to work to help us "Engage and Delight - One Customer at a Time". TreeHouse Foods is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact TreeHouse Use Only: #IND1

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

COMPANY SUMMARY: SPATCO Energy Solutions has been the leader in the fueling infrastructure industry since 1935. We provide a complete line of equipment and services for storing, pumping, mixing and measuring petroleum and industrial liquids. Our customers come from a variety of industries including retail fueling stations, commercial and government fleets. The services we provide to our customers and the community is essential and we are growing! SPATCO currently operates 17 branches with a dedicated training facility in North Carolina and growing service satellites throughout the Southeast. Our goal is to provide top notch customer service. Our experienced technicians are committed to customer service excellence which will advance them and SPATCO in the petroleum industry. Even as an experienced technician you will receive updated training and certifications to help advance your career in the Petroleum industry. Our experienced service technicians will work side by side with branch managers, dispatchers and other experienced technicians and trainees. The growth of SPATCO and its employees depends on our ability to service our customers by working as a team. This may include being paired with a trainee to assist them in completing their training and certifications. This position does not work a typical 8-5 shift, hours may vary based on workload and customer need. Responsibilities: Troubleshoot and repairs gasoline dispensing units (such as: Gilbarco, Dresser Wayne, Gasboy, and Bennett).Troubleshoot and repair of electronic POS (Point-of-Sale) Systems (such as: VeriFone, Gilbarco and NCR).Install, program and tests new petroleum equipment.Analyze electrical and mechanical problems and provide repairs as required.Perform scheduled repairs and preventative maintenance to fueling systems.Communicate with customers and explain technical issues in a non-technical manner. Experience, Competencies and Education High School Diploma or GED.Valid State Issued Driver's License and good driving record.At least 2+ years' experience troubleshooting, repairing and maintaining gasoline dispensing units including dispenser hydraulics and submerged pump units.Hold valid dispenser certification(s).Ability to work outdoors in all types of weather; daily local travel; lifting 50-75 lbs.

As a Maintenance Technician with Mauser Packaging Solutions, you will be essential in ensuring the smooth operation of machinery and equipment within our manufacturing facility. Maintenance Technicians are responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. This role involves applying mechanical expertise in determining work methods and procedures for producing quality product. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Responsibilities: Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start-up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assigned Requirements: We work a continuous schedule - 12 hour shifts, work 3 nights one week and 4 nights the following week3-5 years experience in maintenance within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesPrior experience in injection molding or metal can assembly is not required, but is a plus #INDYorkDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Job SummaryProvides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Job QualificationsRequired QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationIn accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is $15.50-19.38Job SummaryResponsible for assisting members in the selection and purchase of tires, properly installing and repairing tires, completing necessary tire bay documentation, and maintaining tire bay policies and procedures. Team Members:Carry out job functions and responsibilities as assigned. Support the application of club policies, procedures and compliance. We strive for flawless execution and hold ourselves accountable .Acts with honesty and integrity and lead with the member in mind to address any and all concerns and to escalate any concerns, as appropriate.Ensure a safe and positive environment for our members and each other.Embrace inclusion and diversity, by working together with collaboration and respect. Work as a team to achieve goals. Move with speed and agility in everything we do. Innovate and adapt so we can move as fast as the world around us. Maintain a friendly and positive attitude. Members:Deliver service excellence through all points of contact.Resolve and deescalate to address every member concern. Ensure a safe and positive environment and experience for the members. Daily commitment to GOLD Member StandardsGreet, Anticipate, Appreciate (GAA)Fast, Friendly Full, Fresh, CleanClub Standards: Work as a team to deliver GOLD club standards daily. Work with commitment and pride to deliver GOLD- Grand opening look dailyAll items stocked and promotional plans executedMaintain visible accurate signageClean and organized, inside and outKnow your Business:Understand how to access and read production and/or financial performance reporting for your departmentSee the connection between consistent execution and the positive impact it can have on the businessMajor Tasks, Responsibilities, and Key AccountabilitiesResponsible for the proper installation of tires, including mounting, dismounting, rotating, and balancing tires.Responsible for properly disposing of tires and ensuring propane tanks are filled per club policy. Maintains a clean and professional tire bay and waiting area. Merchandises tire displays and automotive products. Ensures that knowledgeable service is provided to members at the tire desk. Coordinates with Home Office regarding member tire needs as needed. Maintains an accurate and complete supply inventory. Understands and appropriately utilizes available special-order tire programs. Complies with safety and cleanliness standards and properly utilizes tire bay equipment. Assists members in the selection and purchase of tires including verifying the sizes for vehicles. Fills propane tanks as needed if certified per DOT requirements. Provides knowledgeable service to members at the tire desk. Understands and appropriately utilizes available special order tire programs. Ensures that all tire bay scheduling data and documentation is completed for sales and service orders. Maintains all club policies and procedures. Performs other duties as assigned, including working in other departments as needed. Regular, predictable, full attendance is an essential function of this job. QualificationsMust be at least 18 years of age. Valid driver’s license and ability to drive automatic and manual transmission vehicles required. Strong interpersonal skills required. Basic computer skills or a willingness to learn basic computer skills required. Prior tire installation experience preferred. Must pass Michelin training levels one through four within three months of hire. Ability to lift over 30 pounds with assistance. Environmental Job ConditionsExposure to both indoor and outdoor temperatures and weather conditions. Most of the time is spent standing and moving about continuously on hard surfaces. Frequent need to bend, climb, crawl, kneel, push, pull, reach, move side to side, stoop, and climb ladders/step stools.Frequently requires lifting objects up to 30 pounds. May require lifting and moving heavy and/or awkward objects more than 30 pounds with assistance. Usually perform job surrounded by moving cars, machinery and/or loud equipment that may require shouting to be heard. There may be occasional exposure to company approved chemicals and cleaning agents, and strong smells.

*Wednesday-Saturday 8pm-6am *About the RoleAs a Maintenance Technician, you will promote workplace efficiency and profitability by maintaining, inspecting and repairing facilities, equipment and machinery. What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, generators, compactors, bailers, conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilitySort, stack and load pallets, cardboard, aluminum, steel and light bulbs for recyclingAssist outside contractors in performing various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning and disinfecting solutions, oil and equipment according to MSDS procedurePay Range: $24.20 - $38.70Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Job SummaryUPS is currently hiring Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities that are performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. This position requires strong electrical background and must pass electrical assessment.Responsibilities:·Troubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encoders·Inspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer plates·Inspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coils·Inspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumps·Welding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of work·Performing preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.02 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

The pay range per hour is $36.50 - $40.50Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Job DescriptionEngineering & Facilities (MT2)About job:Tuition ReimbursementBenefits eligible within two weeks of employmentCurrently hiring for below shifts:L2 Key - Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential)L3 Key - Wednesday - Saturday from 10:00pm - 8:00am ($2.50 shift differential) About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Seize Your Opportunity! 50% Rent Discount! Career Growth Opportunities + Much More! Pay: $18.00 to $20.00/hour What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle. Live within a 30-minute commute of the properties. HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience.Must successfully pass a criminal background check and drug screen. Benefits of Employment: Pay Range: $18 - $20 per hourUp to 50% Rent Discount Property Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC3002 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $82,500K Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingRepair and maintain, in accordance with diagrams, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsWhat Are We Looking ForHigh School Diploma or equivalent requiredMaintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an excess of 40 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$29.25 per hour.Benefits through the Union for Medical, Dental, Vision, and Pension.Union paid vacation, sick leave, and holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35 - $40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Essential Functions/Responsibilities: This is a leadership and transactional role. The position should be able to communication well and be a strong team player. This role will communicate with all different levels of employees from the Plant manager to an operator.Will utilize E Maintenance (CMMS) system to plan work orders, review work orders to understand downtime issues, work with Shop Logix reports (automated downtime database) to understand downtime issues and manage a group scorecard that will be updated each month.Manage the inventory for the store room, setup new parts for the store room, and work on minimizing downtime due to no spare parts.Responsible for reviewing and maintain all incoming work request to ensure timely planning and completion.Maintains accurate information in our CMMS for all new, existing and decommissioned equipment.Maintain awareness and proactively manage all factors contributing to KPI's such as but not limited to:- Safety - Recordable and Lost Time Accidents- Equipment breakdowns and downtime- PM Completion percentage- PM and Line Change Over time deltas- Cost - Labor & Parts- Ratio of Preventative/Proactive Maintenance to Reactive MaintenancePrepares reports, analyzes data, and makes recommendations for improving operations and solving maintenance-related problems. Initiates, implements, and manages the Maintenance program based on best practices.Maximize uptime and reliability through using planned maintenance where it is more effective than alternatives.Rigorously apply safety standards, ensure all team members actively adhere to safety standards and identify any potential risks in their area.Ensure 6S standards are applied and encourage team members to use them for continuous improvement of their working environment.Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assignedSchedule mechanics work assignments and project workSchedule and monitor machinery repairs and rebuildsEnsure all work orders are inputted into E Maintenance for equipment is always to date and accurateWork with machine builders and parts room on all repair parts and order parts when neededEnsure that all maintenance areas are organized and cleanPerform other related duties as determined by managementAttendance is an essential function of the jobMust be at the workstation at the beginning of the shiftMust assist with skills improvement for all mechanic levels Requirements/Qualifications: Technical School graduate preferred or must have an equivalent combination of education and experience.Must be able to effectively communicate by using various tools and techniques: writing, reading, typing, presenting, and creating spreadsheets, and documents. Must be able to articulate instructions and expectations, coach and council, and lead change.Must have strong computer literacy skills/ functional ability for process management, business performance reporting and communication (Microsoft Office, SAP, and CMMS).Excellent interpersonal and leadership skills to influence, engage, negotiate and motivate. Must be able to articulate business priorities, expectations, provide clear direction, delegate responsibility, and objectively manage in all situations including plant emergency situations.Strong analytical skills to review data and create actions to improve equipment OEE.Must have functional knowledge of automated process and machinery.Strong communication, presentation, coaching and counseling skills; able to provide overall vision and lead change by creating high performance work teams.Ability to multitask and prioritize as neededProven organization capability to prepare, communicate and monitor the implementation of plans in detail and interact well with others.Strong interpersonal skills with the willingness and ability to treat team members with respect, communicate clearly, listen and coach. Ability to work in a professional manner under stress is required.Prior experience of working in a Production Floor environment, with a minimum of 2 years in manufacturing.Strong mechanical aptitude and ability to troubleshoot equipment.Basic literacy and numeracy, including ability to read, write and speak English.Must be able to work in mechanically oriented situations, following instructions of a supervisor, and/or department mechanic.Must understand and apply safety precautions used with hand and power tools #INDYorkDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Job SummaryProvides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Job QualificationsRequired QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Mid-level, Senior Engineer or a Sr Staff Engineer level. Please see minimum qualifications list below for each level***********************************Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Sr Staff Engineer - $142,200-$158,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations while acting as a resource and technical expert to engineers. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.Provide technical expertise and consultation through direct involvement and as a subject matter expert when consulted to identify and resolve equipment and system problems.Directly fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Perform engineering tasks as assigned by supervision applying engineering principles.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experienceMINIMUM QUALIFICATIONS for Senior Staff E04 EngineerBS in Engineering or Licensed Professional Engineer with a minimum of 10 years of engineering experience PREFERRED QUALIFICATIONSProfessional Engineer RegistrationAdvanced technical degree or related coursework

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Work Together, Succeed Together – Maintenance Technician Needed! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws.Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $21.00-$23.00 /hr.Up to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC2106 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35 - $40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Job SummaryProvides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Job QualificationsRequired QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $110,700 to $123,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITION This position is responsible for the efficient and effective operation within an assigned organization, in support of the Company's goals and objectives. Whether in operations, maintenance, Fuels or I&C, the Foreman is expected to ensure that safe, continuous and economical processes and procedures are carried out at all times. Within their duties is the responsibility to adhere to the Company's business and ethical standards and assure compliance with all applicable government and industry regulations and practices. PRIMARY DUTIES AND ACCOUNTABILITIESIn addition to actually performing the work within an assigned organization, the Foreman will, using appropriate techniques of motivation, direct the work of employees in meeting safety and productivity goals ensuring the team and its members follow all work practices.Coordinate with, and "turnover" to, other Foremen and shifts the information they will need to continue safe and reliable operations.Ensure that employees perform their duties in a manner consistent with a cognizance of customer awareness and concern.Assist in the development of and execution of work schedules and tasks given to assigned employees are completed in a timely and efficient manner.Demonstrate troubleshooting and problem solving capabilities when called for by exercising good judgment and decision-making skills. This applies to equipment assets and human assets.Communicate in all directions in an efficient manner: with employees assigned, with other Foremen and with management when and as called upon to do so. This includes ensuring the work team is aware of information from management, and that management is aware of the information it needs to make decisions in support of strategies and goals.Develop assigned employees such that their skill sets on the job are increased. Coach new and existing employees in processes, procedures and practices. Make recommendations as to performance improvement both to assigned employees and to organizational management. Participate in the Company's formal performance evaluation process of assigned employees.Support the Company's core values and exhibit positive leadership behaviors.Perform all activities qualified in lower classification positions as needed.Perform all other duties as assigned.MINIMUM QUALIFICATIONSAssociates Degree in Engineering Technology, Electronics, or related field OR HS Diploma with minimum of 18 months of trade or technical training in Power Plant Technology or related field At least eight (8) years experience as a Technician in an appropriate area of plant operations, maintenance, fuels or I&CDemonstrated leadership skills to include attention to safety (personal and environmental schedules, equipment and its efficient use, and the use of employees to get the job doneEffective communication skills in all directionsAbility to plan and organize work through scheduling and making appropriate assignments to best utilize available talentMotivational skills that foster individual and team development and accomplishmentFull understanding and appreciation for procedures, policies, processes and practicesAbility to use the technology and equipment associated with both the Foreman Position and those positions assigned to the Foreman Minimum performance rating of "B" for the past two yearsNo discipline within the last 24 monthSatisfactory attendance recordAbility to work in a power plant environment that includes climbing, walking long distances, and standing for the majority of the timeAbility to lift a minimum of 50 pounds

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35 - $40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Job SummaryProvides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Job QualificationsRequired QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment