General Dentist$200,000 compensation package!Mechanicsburg Family Dentistryis looking for a General Dentist to join our team.Why Heartland Dental As the leader of your supported office, you’ll receive best in class support to provide exceptional lifetime patient care while experiencing unparalleled educational offerings to enhance your elite clinical skills. You’ll work in an environment that encourages full clinical autonomy, with the ability to tap into a robust mentorship program and a network of more than 1600 supported doctors. You’ll work a schedule that inspires work life balance and receive competitive benefits, discretionary PTO and the opportunity to earn unlimited compensation. Lead your ideal practice, invest in your community, leave a legacy, and do it all with the support of Heartland Dental! What You’ll GainDiscretionary PTO, paid holidays and continuing education, competitive benefits including health insurance and retirement savings plans Guaranteed base salary Uncapped earning potential Opportunity to build wealth by participating in Heartland Dental stock offerings You will have a full clinical team including a dental hygienist and dental assistant to support you in delivering lifetime patient careWorld class continuing education focused on helping you achieve the elite clinical skills you desireAbility to earn your FAGD through the Doctor Mastery Program which allows you to offer a broader menu of services to your patients Access to an expansive network of mentors with 1:1 mentorship support and networking opportunities available at your fingertipsUnparalleled business support and the highest quality technology, supplies, and labs means you’re in the driver’s seatYou’ll need to haveDDS/DMD degree, active and unrestricted license in state of PAClinical knowledge to practice comprehensive dentistry, including diagnosis and treatment of oral health issuesDesire to continue learning and grow clinical skills to meet needs of patientsAbility to become credentialed with dental insurance plansThe position will have access to minimum PHI necessary for performing job-related functions; regular HIPAA training, aligning with the specific role and responsibilities, will be required; and the individual will need to protect PHI and maintain data safeguards.Physical RequirementsAbility to perform essential duties satisfactorily with or without reasonable accommodation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the positionProlonged periods sitting and standingMust be able to lift and carry up to 45 pounds at timesAvailability to attend virtual training sessions (or in-person)periodically throughout the yearWho is Heartland Dental As the largest and one of the fastest growing Dental Support Organizations, Heartland Dental provides exceptional service to its more than 2,300 supported doctors in 38 states and over 1,400 supported offices. Each Heartland Dental supported office is unique to the community and the patients they serve. Supported Doctors are the leaders of their practice and set forth their own clinical care philosophies. With the largest network of doctors, we are founded by a doctor for doctors with a mission to support dentists and their teams as they deliver the highest quality dental care and experiences to the communities they serve while providing exceptional careers and creating value for our stakeholders.At Heartland Dental, we’re committed to living our core values which promote diversity and inclusion. We provide all employees and applicants for employment the protections of federal, state, and local laws affording equal opportunity in employment. As part of our commitment to maintaining a safe and healthy environment for both team members and patients, a tuberculosis (TB) test is required for all new hires in dental office positions. This is a standard requirement for dental office roles and must be completed prior to starting employment. The test will be arranged during the pre-employment process, and any necessary guidance or paperwork will be provided. Not applicable in the state of FL & TN.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $82,500K Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group

Shift: This role is 2nd Shift, 1:30 PM-12:00 AMHourly Rate: $31.43 an hour + $1.00 shift differentialConagra Brands in Hagerstown, proud makers of Gardein, is looking for a Maintenance Technician to join our team. You will join a team of about 250 and will report to the Maintenance Supervisor.Schedule:2nd Shift | 1:30pm - 12:00am | You will need to be available for possible weekend workStarting Pay:$31.43/hour | Your wage will increase over time!Position Responsibilities:Must follow all Plant, Safety, Quality, and Lockout/Tagout regulationsRead, interpret and work from schematics, sketches, and documents such as safety rules, operating and maintenance instructions and procedure manualsMaintain operational tasks of plant machinery and equipment, ensuring Safety and QualityTroubleshoot Electrical components and replace/reprogram VFD’sSafely operate shop equipment including Lathe, Drill press, Hydraulic press MIG/TIG weldMake and repair parts such as Shafts, guards, flanges, and pipes.Work from different heights on scaffolding, mechanical lifts, and ladders as a last resortCan obtain and sustain a forklift licenseCan demonstrate performance in correcting machine failures, preventative maintenance and in developing working relationships with fellow employees and managementAnalyze data to make effective decisionsWork with others to identify opportunities for improving machinery and maintenance systemsCan become certified in Ammonia/Boiler RoomsOther tasks as assigned by supervisor, department manager, or plant leadershipMinimum Qualifications:High School Diploma or GED – required5+ Years as a Maintenance technician - Prior experience should include working knowledge of electrical motors and industrial electrical controls, including design, wiring, and troubleshooting of advanced motor control and safety circuitsCan safely operate shop equipment including Lathe, Drill press, Hydraulic press MIG/TIG weldCan read, interpret and work from schematics, sketches, and documents such as safety rules, operating and maintenance instructions and procedure manualsExperience with PLC systems preferredAnticipated Close Date: January 31, 2025Location: Hagerstown, MarylandOur Benefits:We care about your total well-being and will support you with the following, subject to your location and role:Health: Medical, dental and vision insurance, company-paid life, accident and disability insuranceWealth: Great pay, 401(k)/pension eligibility, financial wellness programs and stock purchase planGrowth: Career development opportunities, employee resource groups and team collaborationBalance: Paid-time off and volunteer opportunitiesOur Company:At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions – within our people and our iconic brands like Birds Eye ®, Slim Jim® and Reddi-Wip®.Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome.Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer

730 E King St., Shippensburg, PA 17257AUTOMOTIVE TECHNICIANTop Pay & Great Benefits! Earn $45,000 - $90,000+ a Year!HIRING ALL LEVELS OF EXPERIENCE!H & H Chevrolet Cadillac is HIRING NOW for Service Technicians with all levels of experience! We’re busier than ever and are scheduling interviews immediately!Whether you are a lube tech, master tech, or GM certified – We want to hear from you!We welcome Technicians from other brands and industries such as:Firestone, Pep Boys, Jiffy Lube, Midas, Valvoline, etc.We have a state-of-the-art facility and equipment, knowledgeable service advisors, and an honest, respectful, and transparent workplace. H & H is family-owned and operated serving Shippensburg and the surrounding areas for over 92 years! We provide career advancement opportunities to all our team members and promote from within! Most of our employees have been with us for years –We recognize each employee's hard work, progress, and achievement.Apply online today!We offer:Hourly and Flat Rate Hourly Pay Plans Available! Tell us about your experience at your interview!Performance BonusesTraining Bonus$45,000 - $90,000+ a yearFull-time Position, 40-hour minimum work weekContinued, Paid Factory TrainingMedical InsurancePaid Time Off (PTO)401(k) Retirement Plan with Company MatchLow Turnover: Long-term Job Security & Career AdvancementWork/Life Balance – We offer a flexible schedule & we’re closed on all major holidays because spending time with family and friends is importantEmployee Discounts on Products & ServicesA Positive & Professional Team EnvironmentClosed on SundaysResponsibilities - Service Technician:Inspect vehicle and diagnose the problem(s)Perform quality repair/maintenance work that meets dealership and manufacturer standards including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc.Provide an estimate of time and parts needed for repair/maintenanceLearn new technical information and techniques in training sessions to stay current with rapidly changing technology.Keep shop neat and account for dealership owned toolsOther duties may be assigned according to skill level and certificationQualifications - Service Technician:Previous experience as an auto dealership technician is preferredGM & ASE Certified is a huge plus!Express Techs must have previous high school or college auto mechanical training with the basic equipment knowledgeWe welcome Technicians from other brands!Valid driver's license with an acceptable driving recordFlexible and focused on maintaining a high level of customer serviceGood work ethic and problem-solving skillsA positive attitude and works well as part of a teamPlease upload your resume. Completing the online assessment will grant you priority consideration!Must be authorized to work in the U.S. without sponsorship and be a current residentApplicants must pass pre-employment screeningWe are a Drug-Free WorkplaceThank you for considering us!We are an Equal Opportunity Employer.All qualified applicants are considered regardless of ethnicity, nationality, gender, veteran or disability status, religion, age, gender orientation, or other protected status.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $82,500K Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group

Shift: This role is 2nd Shift, 1:30 PM-12:00 AMHourly Rate: $39.48 an hour + $1.00 shift differentialConagra Brands in Hagerstown, proud makers of Gardein, is looking for an Electrician Technician to join our 2nd shift team. You will join a team of about 250 and will report to the Maintenance Supervisor.Schedule:2nd Shift | Monday - Saturday | 1:30pm - 12:00am | You will need to be available for possible weekend work.Starting Pay:$39.48/hour + $1/hour shift differential | Your wage will increase over time!Essential Duties:Work with Planner to ensure all cell tasks are planned and resourced.Support all departments, including PM linkages with Autonomous Maintenance Development (AMD), Focused Improvement (FI) Methods, Early Management (EM) and Environment, Health & Safety (EHS).Help maintain packaging, process, and utility equipment.Troubleshoot and make routine repairs to all systems - Mechanical, AC/DC, VFDs, PLC.Perform Preventive/Predictive Maintenance (Mechanical and Electrical) as assigned: Lubrication, Rebuild, Time-based replacement.Help plan process by identifying parts and work required using CMMS.Participate in Breakdown Elimination process.Enter accurate data in CMMS.Fabrication experience (weld, mill, lathe).Work safely and promote safe work practices.Complete plans of electrical wiring for well-functioning electrical systems in an industrial/manufacturing environment.Interpret and create electrical drawings and schematics. Install electrical apparatus, fixtures, and equipment.Install safety and distribution components: switches, resistors, circuit break panels.Connect wiring in electrical circuits and networks ensuring compatibility of components.Prepare and assemble conduits and connect wiring through conduits.Prevent breakdown of systems by inspecting and replacing old wiring and insulate cables, cleaning circuits.Perform troubleshooting to identify hazards or malfunctions and repair or substitute damaged units.Provide emergency/unscheduled repairs of production equipment during production, perform electronic tests and inspections, cleaning contacts, circuit boards, ensuring systems are grounded.Read and interpret equipment manuals and work orders to perform required maintenance and service.Diagnose problems, replace, or repair parts, test and adjust.Use a variety of hand and power tools, electric meters, and material handling equipment in performing tasks.Qualifications:Can perform all job responsibilities safely.Can read and write in English.Work with all personnel in plant.Use SAP, Microsoft excel (can maintain complex spreadsheets), Word, Outlook, and PowerPoint.Understanding of Electrical safety.Experience:Experience related to continuous improvement programs (TPM).Have one (1) year minimum of trade or technical skill set, such as Welding, Electrical, HVAC, Industrial Maintenance, or Machine Shop.Education:High School Education or equivalent.Anticipated Close Date: January 31, 2025Location: Hagerstown, MarylandOur Benefits:We care about your total well-being and will support you with the following, subject to your location and role:Health: Medical, dental and vision insurance, company-paid life, accident and disability insuranceWealth: Great pay, 401(k)/pension eligibility, financial wellness programs and stock purchase planGrowth: Career development opportunities, employee resource groups and team collaborationBalance: Paid-time off and volunteer opportunitiesOur Company:At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions – within our people and our iconic brands like Birds Eye ®, Slim Jim® and Reddi-Wip®.Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome.Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer