Bullock Construction Inc is looking for experienced operators to join our team traveling to different job sites on the East Coast, to include VA, MD, DE, PA, TN, NC, SC and GA. You will be responsible for operating and maintaining various types of railroad equipment used in the construction, maintenance and repair of railway tracks. Will do track work on ground when not operating.
Work schedule: 8 days on (10 hours shifts) then 6 days off.
Job Duties: Safely operate various types of railroad equipment, including but not limited to track laying machines, ballast regulators, tampers and rail grinders. Perform routine maintenance and minor repairs on equipment to ensure proper functioning. Follow all safety protocols and procedures to ensure a safe working environment. Conduct pre-operational and post-operational inspections of equipment to ensure they are in good working condition. Be prepared to respond to emergencies, such as derailments or track obstructions and assist in the necessary repair work. Performs other duties that may be assigned
Benefits: Health, Dental & Life Insurance - after 60 days 401K/Roth profit sharing plan - after 1 year
Qualifications: Two years of experience operating various railroad equipment - Spiker, Kershaw Kribber Adzer, Tie crane, Tie inserter, Speedswing, grapple truck and other heavy equipment. Experience using a variety of hand-held tools, including powered and manual equipment. Practice safe tool and equipment use, following all safety regulations and guidelines. Clear vision and hearing. Excellent hand-eye coordination Ability to understand and follow directions. High school diploma or equivalent preferred Must be available to work all shifts. Days, nights and weekends and travel. Ability to obtain security passes for various government facilities Must pass background check and DOT drug test Must have reliable own transportation for travel to the jobsite. Hazards: Weather, track, fumes, moving mechanical parts and vibration.
Physical Requirements: Ability to perform essential functions requiring various physical movements. Must use all extremities, work outside in extreme temperatures and weather, and perform tasks like crawling, kneeling, and bending. Occasionally lift or move up to 100 pounds.

Bullock Construction Inc is seeking experienced Railroad Laborers for the construction, maintenance, and repair of railroad tracks. This role involves working as part of a team to complete new projects including track builds, repairs, maintenance, etc. Must be willing to travel. New projects are located in York, PA as well as other locations along the East Coast, to include MD, DE, NC, SC, GA and TN.
Job Duties: Assist in the installation, repair and maintenance of railroad tracks and related infrastructure. Perform tasks such as laying and aligning rails, securing ties and replacing worn components. Operate and maintain various tools and equipment used in track work. Conduct inspections and perform routine maintenance to ensure track safety and functionality. Follow safety regulations and protocols to prevent accidents and injuries Remove brush and other vegetation from between rails Operate hand-held powered equipment and manual tools. Keep the job site clean. Performs other duties that may be assigned
Benefits: Health, Dental & Life Insurance - after 60 days 401K/Roth profit sharing plan - after 1 year
Qualifications: 2 years of experience in railroad construction industry. Clear vision and hearing. Excellent hand-eye coordination Ability to understand and follow directions. High school diploma or equivalent Must be available to work all shifts. Days, nights and weekends. Ability to obtain security passes for various government facilities Must pass background check, DOT/FRA drug test Must have own vehicle for travel to the worksite location. Hazards: Weather, track, fumes, moving mechanical parts and vibration.
Physical Requirements: Ability to perform essential functions requiring various physical movements. Must use all extremities, work outside in extreme temperatures and weather, and perform tasks like crawling, kneeling, and bending. Occasionally lift or move up to 100 pounds.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Our Taneytown, MD Pump Manufacturing facility is over 150,000 square feet and provides capability for engineering, design, customer service, machining, assembly, and testing for a diverse product portfolio, which serves all markets (power, oil & gas, water resources, general industry, and chemical). The facility has expanded four times since opening in 1971 to accommodate revenue growth and product line developments. The entire project lifecycle is experienced all under the same roof. Summary: Flowserve is looking for a Machine Operator at our manufacturing facility in Taneytown, MD. The individual will perform a variety of tasks within our machining department including the use of overhead jib cranes, ergonomics, and inspection equipment. This is a great opportunity to start your career with Flowserve! 2nd shift: Monday-Thursday 3:30pm -2:00 am - 5% shift differential Responsabilities: Will read and document scales to verify parts are in conformanceWill run and observe machine operation and verify quality of finished workpieces to specifications by means of self-inspectionsOperate overhead and jib cranes to lift and move heavy partsWill be required to work in other areas of department when neededMove materials and parts to and from work areas via power lift trucks and fork trucksResponsible for accurate completion of certification reportsAdhere to all Safety Procedures & Policy. Complete all Pure Safety and other safety training as required Requirements: 1-2 years of experience in machining or similar fieldAbility to work in a team oriented and CIP environmentAbility to follow complex verbal and written instructionsBasic shop math skillsAble to stand for long periods, repetitive arm motions, frequent lifting with occasional lifting up to 50 lbs.Ability to work overtime as required Preferred: Experience in using and interpreting precision measuring instruments, such as micrometers, dial indicators, and depth gaugesAbility to read and interpret blueprints, geometric tolerances, and finishes during the application of machiningForklift certificationHigh School Diploma or GED The pay range for this position is $18.59 - $27.86 USD Hourly Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-11049 Job Family Group : Operations Job Family : OP Machine Operation EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

General DentistMechanicsburg Family Dentistryis looking for a General Dentist to join our team.Why Heartland Dental As the leader of your supported office, you’ll receive best in class support to provide exceptional lifetime patient care while experiencing unparalleled educational offerings to enhance your elite clinical skills. You’ll work in an environment that encourages full clinical autonomy, with the ability to tap into a robust mentorship program and a network of more than 1600 supported doctors. You’ll work a schedule that inspires work life balance and receive competitive benefits, unlimited PTO and the opportunity to earn unlimited compensation. Lead your ideal practice, invest in your community, leave a legacy, and do it all with the support of Heartland Dental! What You’ll GainUnlimited PTO, paid holidays and continuing education, competitive benefits including health insurance and retirement savings plans Guaranteed base salary Uncapped earning potential Opportunity to build wealth by participating in Heartland Dental stock offerings You will have a full clinical team including a dental hygienist and dental assistant to support you in delivering lifetime patient careWorld class continuing education focused on helping you achieve the elite clinical skills you desireAbility to earn your FAGD through the Doctor Mastery Program which allows you to offer a broader menu of services to your patients Access to an expansive network of mentors with 1:1 mentorship support and networking opportunities available at your fingertipsUnparalleled business support and the highest quality technology, supplies, and labs means you’re in the driver’s seatYou’ll need to haveDDS/DMD degree, active and unrestricted license in state of PAClinical knowledge to practice comprehensive dentistry, including diagnosis and treatment of oral health issuesDesire to continue learning and grow clinical skills to meet needs of patientsAbility to become credentialed with dental insurance plansThe position will have access to minimum PHI necessary for performing job-related functions; regular HIPAA training, aligning with the specific role and responsibilities, will be required; and the individual will need to protect PHI and maintain data safeguards.Physical RequirementsAbility to perform essential duties satisfactorily with or without reasonable accommodation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the positionProlonged periods sitting and standingMust be able to lift and carry up to 45 pounds at timesAvailability to attend virtual training sessions (or in-person)periodically throughout the yearWho is Heartland Dental As the largest and one of the fastest growing Dental Support Organizations, Heartland Dental provides exceptional service to its more than 2,300 supported doctors in 38 states and over 1,400 supported offices. Each Heartland Dental supported office is unique to the community and the patients they serve. Supported Doctors are the leaders of their practice and set forth their own clinical care philosophies. With the largest network of doctors, we are founded by a doctor for doctors with a mission to support dentists and their teams as they deliver the highest quality dental care and experiences to the communities they serve while providing exceptional careers and creating value for our stakeholders.At Heartland Dental, we’re committed to living our core values which promote diversity and inclusion. We provide all employees and applicants for employment the protections of federal, state, and local laws affording equal opportunity in employment. As part of our commitment to maintaining a safe and healthy environment for both team members and patients, a tuberculosis (TB) test is required for all new hires in dental office positions. This is a standard requirement for dental office roles and must be completed prior to starting employment. The test will be arranged during the pre-employment process, and any necessary guidance or paperwork will be provided. Not applicable in the state of FL & TN.

Req ID:443566Address: 14188 Perini Ave Hagerstown, MD, 21742Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Build your best future with the Johnson Controls Team As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer: Competitive salary and bonus planPaid vacation/holidays/sick time Comprehensive benefits package including 401K, medical, dental, and vision care On the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policyCheck us out: A Day in a Life at Johnson ControlsWhat you will do:You will be responsible for supporting regional operational activities and overseeing all aspects of the branch and warehouseHow you will do it:Branch sales growth both in units and Parts and Supplies.Operational support and management of the branchManage customer support and maintain an efficient operation.Develop and train the Counter Sales and Warehouse Associates.Maintain inventory control within branch and region to adequately serve customers while maintaining 98% cycle count accuracy.Manage all shipping and receiving activities to assure that products are handled and stored in a safe and efficient manner.Train warehouse personnel in material handling methods and ensure that the applicable OSHA requirements are fulfilled including forklift certification.Manage the product selection function for the location.Administer the Factory Warranty policies and include review and approval of warranty claims and the proper disposition of defective items.What we look for:Required3-5 years of branch/warehouse management experience.Proficiency in Windows and Microsoft Office software.Strong interpersonal, customer relationship and decision-making skills.Effective and professional communication and organization skills.Strong analytical skills and a positive human relations orientation.PreferredHVAC industry experience.Ability to operate a forklift#SalesHiring#LI-TK1#HVACJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Be able to identify parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Able to learn and demonstrate vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems.Able to learn and demonstratetractor and trailer maintenance, DOT rules and regulations, company policies and procedures. We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. #CAZL Pay is $21 - $24 / hour ExperiencePreferredDiagnose and repair tractors and trailers

$19.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You'll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You'll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We're Looking For:Valid Driver's License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. FrederickMarylandUnited States of America

Industrial Maintenance Technician- 2nd & 3rd Shift 201 S College Ave, New Oxford, PA 17350, USAReq #9670 Tuesday, July 9, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Principle Accountabilities:Responsible for maintaining all converting and corrugating equipment to minimize downtime.Follow all PCA and plant procedures, protocols and safety policiesDemonstrate ability to parallel all rolls, make all required settings and adjustments for optimum equipment performance to manufacture quality products.Demonstrate ability to troubleshoot programmable controllers and troubleshoot and repair all A/C and D/C drives and their control systems use.Maximize the utilization of equipment by maintaining the machinery to run at available capacity and speed.Follow up all work in order to insure repairs and work are performed properly. Demonstrate ability to use all aspects of the maintenance software program.Complete all paperwork neatly, correctly, and in accordance with Company guidelines.Willingly work all necessary hours and shifts. Must be able to work overtime as needed.Help maintain good housekeeping in work areas.Additional duties may be assigned by management.Basic Qualifications: High school diploma or GED.Provide own tools necessary to perform maintenance tasks.Preferred Qualifications: Prior work experience in the corrugated industry. Knowledge, Skills & Abilities:Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving one or more concrete variables in standardized situations.PCA provides a competitive comprehensive benefits package.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourly

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Northern Maryland area! Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#UP

AutoReqId: 19820BR Pay Class: Salaried Exempt Minimum Pay Rate: $80,810.00 Maximum Pay Rate: $111,110.00 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. HERE’S WHAT YOU’LL GET TO DO This is a great opportunity for someone looking to supervise a maintenance crew with an industry leader in the cement manufacturing industry. The cement plant in Union Bridge, MD is looking for someone who is hardworking and dedicated to becoming a part of our team. This position will be responsible for all aspects of day-to-day preventive maintenance and repair activities for the department. The following are some of the responsibilities: Schedule and supervise the work as arranged through the Maintenance Planner to maintain equipment to meet production requirements.Oversee the work performed by maintenance crews and outside contractors as required for each job to ensure completion in a timely and quality manner.Manage any urgent or breakdown jobs as required to keep equipment running and minimize downtime.Provide development of direct reports and motivate staff resulting in a reliable and competent work force. Provide technical assistance to maintenance personnel toward expedient problem resolution.Execution of these specific duties will be achieved through the following:Schedule, assign, plan and monitor the work of maintenance shop personnelCoordinate with the Maintenance Planner by communicating anticipated jobs and providing input when stores stocks need to be increased or altered, for upcoming jobs to maintain maintenance schedulesWith the Maintenance Planner develop work schedules, equipment usage schedules, prioritize mechanical expenditures and procedures for equipment to meet overall plant goals.Prepare material and labor estimates to develop project cost estimates and plant budgets.Monitor the acquisition and use of materials to meet productivity and budgetary goals.Maintain time, work order, material, equipment and other mechanical shop recordsDetermine appropriate training for employees.Evaluate employee skills, abilities, safety practices and behavior to maintain the necessary skills to perform their jobs.Plan the schedules of the staff including assigning work and overtime as required to meet maintenance needs.Participate in the implementation of plant projects. Provide input into the design and implementation of mechanical aspects of projects to ensure tasks are able to be accomplished in a quality, cost-effective, and timely manner.Ensure the application of the plant’s rules of conduct, policies, and health & safety protocols during maintenance procedures to minimize injuries and lost time incidents.Provide ongoing maintenance support to the plant for all shifts by participating in the plant’s on call program. This includes evaluating and determining the course of action for maintenance incidents after hours and on weekends while on call and may require on-site supervision of the resolution to maintain operational efficiency. Must be willing to work weekends and after hours for supervision of emergency repairs as needed.Ensure that Maintenance department tools and equipment are in good working condition and that adequate stocks of consumables are maintained to allow maintenance activities to occur as scheduled.Complete assigned work and be in compliance with all Federal, State, and Local regulatory requirements. REQUIREMENTS 5 years of mechanical repair and maintenance experiencePrior supervisory experience preferredPrior experience working with heavy industrial machinery and equipmentDemonstrated ability to lead others with or without direct authorityWorking knowledge of SAPFamiliarity with Microsoft Office products including MS Excel and WordPrior experience working with or interpreting Collective Bargaining Agreements is a plusAbility to anticipate and adapt to changing situationsAbility to perform tasks that include walking, climbing equipment, working within confined spaces and occasionally lifting to 50 lbs.Willingness to provide coverage during off-shift hour and weekends as require Heidelberg materials is a drug free workplace. External candidates must be able to work in the USA without sponsorship, Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Hepaco, a Clean Harbors company in Hagerstown, MD is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Hepaco, a Clean Harbors company is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementKey Responsibilities:Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsRequired Qualifications:Reliable transportationAbility to perform physical functions per Key ResponsibilitiesThis position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs.Perform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.Preferred Qualifications:Valid Driver’s licensePrevious relevant labor experienceHepaco, a Clean Harbors company is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class.Hepaco, a Clean Harbors company is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Hepaco, a Clean Harbors company is a Military & Veteran friendly company.CH #HEP *HEP

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

JOB DESCRIPTIONResponsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start-up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assignedRequirements:We work a continuous schedule - 12 hour shifts, work 3 nights one week and 4 nights the following weekHigh School Diploma or GED3-5 years experience in maintenance within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesPrior experience in injection molding or metal can assembly is not required, but is a plus #INDYork Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

The technician is involved in the performing both preventative maintenance and corrective maintenance. This position requires a high level of technical expertise with a variety of building infrastructure. Involved in campus' repairs, protects, and beautifies various interior and exterior surfaces and various components of the physical structure of building in client facility providing painting and Carpentry work. Technician will be performing both preventative maintenance and corrective maintenance on multiple interior and exterior surfaces.The position may be called upon to perform other general maintenance and support duties on an as-needed basis.ScheduleShift: 3rd shift Monday - Friday 10pm-6:30am.The individual in this role must be available for on-call work.Off-hours shifts, evening, night and weekend work may be required.ESSENTIAL FUNCTIONSPerformance of ongoing preventive and repair response work orders on facility mechanical systems, equipment, and other associated components.This includes maintaining and repairing air handling units, exhaust fans, fume hoods, fan coil units, reheat coils, and other associated mechanical equipment.Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations.Monitor the operation and make adjustments on refrigeration, heat exchanger, HVAC, electrical, emergency backup systems and hot water systems; monitors operation, adjusts, and maintains refrigeration, chilled water, and air conditioning equipment; boilers, and ventilating and hot water heaters; pumps, valves, piping and filters; other mechanical and electrical equipment; record readings and make adjustments where necessary to assure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required.Performs preventive maintenance on all base building and critical system equipment which includes but not limited to: assembling all tools, supplies and instruments necessary to complete the job, performing work with a minimum amount disruption, conducting immediate clean up of work area, completing the preventive task sheet, returning tools to workshop, and unused supplies to store room, reporting any equipment problems to Chief Engineer.Install and repairs plumbing/piping/tubing; wire single and three phase motors, operating parts, etc.; install and rebuild pumps and motors; install and rebuild air compressors; heat exchangers; replace bearings in all types of motors; replace seals on pumps; install and repair piping, valves, filters, hot water systems and associated controls; assist other mechanics and operators with major repairs and maintenance of building and equipment. Installs, repairs, and maintains electrical controls, switching and motor controls.Review and analyzing system data (e.g., reliability, 1 calls) and developing initial recommendation with the Chief Engineer on any maintenance changes, upgrades, replacements, etc.Maintain up to date & complete system documentation in a central resource location, for all repairs or changes to the system Maintains tools and orders supplies as required for installation and repairsComplies with departmental policy for the safe storage, usage and disposal of hazardous materialsSupports other task/work as assignedRequirementsHigh school diploma or equivalent requiredCandidate must possess and maintain a valid state driver’s license (if mobile)Have a minimum of 1- 3 years of applicable working experience in general building repair and maintenance, basic plumbing, and basic electrical.Must be able to lift up to 80 lbs and climb up to 30 ft ladders.Position requires frequent climbing, bending, kneeling, lifting, and driving.Candidate must possess and maintain a valid state driver’s licenseMust pass background, drug/alcohol, and MVR screening process (if mobile)#HVACjobs

Job SummaryOur Meat Cutters ensure that our guests are receiving the best and most delicious products, presented according to their requirements. In addition to providing unparalleled guest service and supporting the Meat Lead, you'll make sure that our offerings and services promote guest loyalty, and growth and success for the store. As a member of our Meat Team, your primary responsibility will be to cut meat and other products for sale and ensure our customers are provided with the freshest product possible. You’ll create and sustain an exemplary customer service atmosphere to build lifelong relationship by focusing on understanding and exceeding customer needs. To thrive in this position, you should be a team player. You know that you are only successful when those around you are set up for success. You are eager to support an amazing team, have the drive to grow your career in leadership and have the ability to inspire those around you. Job DescriptionExperience Required:Satisfactory completion of job specific skills assessment; 6 to 12 months experience or successful completion of the Giant Eagle Apprenticeship programExperience Desired: Prior meat cutting experienceEducation Desired: High school diploma or equivalentCertification or Licensing Required: Meat cutting certificationLifting Requirement: Up to 50 poundsJob ResponsibilitiesCut meat to be sold to customers by taking the product out of the cooler and cutting meat into smaller sizes to be packaged for sale. Service guests by answering questions and/or filling special orders. Rotate and check code dates on products to ensure customers safety. Wrap and maintain meat case. Provide products and services that meet the requirements of internal and external customers at all times, and abide by the Company's Guiding Principles, Common Purposes, and Service Credo's. Maintain safety as the top priority in all aspects of our work, for our Team Members, guests, and products. Become familiar with products in the store to answer questions and make suggestions to customers. Utilize knowledge of code dating. Cultivate a foodie culture by sharing excitement and passion for food with Team Members and guests. Smile and greet customers in a friendly manner, whether the encounter takes place in the Team Member's designated department or elsewhere in the store. Make ground meat by putting course ground into the grinder then traying meat. Inspire your fellow Team Members and our guests with a passion for food and a willingness to go the Extra Mile to provide the best product. Properly handle products and equipment in accordance with food safety and safety guidelines to ensure a safe shopping environment. Provide active sampling opportunities, when appropriate. Unload deliveries by checking in truck. Maintain cleanliness of equipment, tables, utensils, floor, etc. to ensure that safety and sanitation regulations are met. Accurately record and assist in preparation of special orders to ensure the customer is delighted with the finished product. Assist in maintaining meat cooler and freezer efficiency by unloading deliveries. Follow proper procedures to ensure store meets out-of-stock percentage goals. About UsAt Giant Eagle Inc., we’re more than just food, fuel and convenience. We’re one giant family of diverse and talented Team Members. Our people are the heart and soul of our company. It’s why we strive to create a nurturing environment that offers countless career opportunities to grow. Deep caring and solid family values are what makes us one of the top work places for jobs in the Greater Pittsburgh, Cleveland, Columbus and Indianapolis Areas. From our Warehouses to our GetGo’s, our grocery Stores through our Corporate home office, we are working together to put food on shoppers' tables and smiles on their faces. We’re always searching for the best Team Members to welcome to our family. We invite you to join our Giant Eagle family. Come start a lasting career with us.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Location: Camp Hill, PAJob Type: Full timeShift(s) Available: 1stCompensation: $21.75/hr Benefits Information Medical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesMarathon Health Clinic (Employer sponsored health center)Paid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)ShortTerm Disability and Life InsuranceEmployee Assistance Program (EAP)Employee Discount Principal Accountabilities Working in a wet or humid environment in cold temperatures and around heavy machineryLifting, stretching, standing or sitting for long periods of timeSafely operate a forklift and/or pallet jack to stage finished goods in proper floor locations to await shippingLoading wrapped pallets into designated truckUnloading totes/pallets as needed for productionScanning all totes/boxes to be shipped, recording physical counts and wrapping pallets to be shippedInspect pallet jack/High-Reach to ensure is in good working conditionsEnsure that all food safety procedures and practices are being followedEnsure that all safety procedures and practices are being followedEnsure you are wearing proper personal protective equipment Required Qualifications Must be eligible to work in the United States without Visa sponsorshipMust be 18 years or olderMust be able to operate a high reach truck/stand up forkliftMust be able to operate an electric pallet jackBe sure you are following proper lifting proceduresAbility to lift, stretch, stand, and sit for long periods of time Preferred Qualifications Bilingual preferredPrevious experience on a high reach truckPrior work history in a fast-paced production environment Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

Futures start here. Where first steps, new friendships, and confident learners are born. At KinderCare Learning Companies, the first and only early childhood education provider recognized with the Gallup Exceptional Workplace Award, we offer a variety of early education and child care options for families. We pave the way for their lifelong learning journey ahead. And we want you to join us in shaping a future we can all be proud to sharein neighborhoods, at work, and in schools nationwide.Our teachers, center staff, and field leaders are the heart and soul of our business. When you join us, you’ll be directly supporting children and their education every day and experiencing the trials and triumphs that come with that responsibility. But you’ll never be alone. You’ll do it all with a village of dedicated and passionate humans who care as much about helping kids reach their highest potential as you do. The best part Seeing the positive impact you’re making on the lives of young learners and their familiesand knowing that your work matters.When you join our team as a Teacher we will:Invest in you and your career at KinderCare as you create a world-class experience in our classroomsReward your commitment to our children and families as your journey continues with usWhen you join our team as a Teacher you will:Implement KinderCare's curriculum in a way that is consistent with the unique needs of each childCreate a safe, nurturing environment where children can play and learnPartner and connect with parents, with a shared desire to provide the best care and education for their childrenSupport your center’s success; partner with center staff and leadership to achieve goals around enrollment, accreditation, and engagementCultivate positive relationships with families, teachers, state licensing authorities, community contacts and corporate partners Qualifications: Outstanding customer service skills, strong organizational skills, and the ability to multi-task and handle multiple situations effectivelyCPR and First Aid Certification or willingness to obtainMeet state specific qualifications for the role or willingness to obtainActive Child Development Associate (CDA) Credential (or willing to obtain) Physically able to use a computer with basic proficiency, lift a minimum of 40 pounds, and work indoors or outdoors Able to assume postures in low levels to allow physical and visual contact with children, see and hear well enough to keep children safe, and engage in physical activity with childrenRead, write, understand, and speak English to communicate with children and their parents in English Our benefits meet you where you are. We’re here to help our employees navigate the integration of work and life: Know your whole family is supported with discounted child care benefits.Breathe easy with medical, dental, and vision benefits for your family (and pets, too!).Feel supported in your mental health and personal growth with employee assistance programs.Feel great and thrive with access to health and wellness programs, paid time off and discounts for work necessities, such as cell phones. and much more. We operate research-backed, accredited, and customizable programs in more than 2,000 sites and centers across 40 states and the District of Columbia. As we expand, we’re matching the needs of more and more families, dynamic work environments, and diverse communities from coast to coast. Because we believe every family deserves access to high-quality child care, no matter who they are or where they live. Every day, you’ll help bring this mission to life by building community and delivering exceptional experiences. And if you’re anything like us, you’ll come for the work, and stay for the people. KinderCare Learning Companies is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, military or veteran status, gender identity or expression, or any other basis protected by local, state, or federal law.Primary Location : Mechanicsburg, Pennsylvania, United StatesJob : Teacher and Center Staff

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently hiring Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. Candidaterequires strong electrical background and must pass electrical assessment.Responsibilities and DutiesTroubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encodersInspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer platesInspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coilsInspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumpsWelding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of workPerforming preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $33.42 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Our Taneytown, MD Pump Manufacturing facility is over 150,000 square feet and provides capability for engineering, design, customer service, machining, assembly, and testing for a diverse product portfolio, which serves all markets (power, oil & gas, water resources, general industry, and chemical). The facility has expanded four times since opening in 1971 to accommodate revenue growth and product line developments. The entire project lifecycle is experienced all under the same roof. Role Summary: Flowserve is looking for a Machinist at our manufacturing facility in Taneytown, MD. The candidate should be proficient in the set-up and operation of manual lathes, with exposure to CNC. The ideal candidate will have extensive knowledge of the general manufacturing environment to include, able to work safely, able to machine tolerances +/- .001, precision tool grinding, the use of overhead jib cranes, ergonomics, and inspection equipment. This machinist position requires self-inspection of parts, able to use trigonometry to find dimensions, understanding of geometric tolerancing, and being able to work in a safe and efficient manner. 2nd shift: Mon - Thur 3:30 pm - 2:00 am - 5% Differential Responsibilities: Machinist with experience running castings on manual and CNC machines.Maintain clean and well-organized work area at all times while maintaining all tooling and machinery for efficient and safe operation.Accurately machine to within a +/- .001 tolerance and familiar with prints with geometric tolerances.Comfortable with all types of precision measuring equipment and working in English and Metric systems.Experienced with jib and overhead cranes lifting large castings.Understand and operate machines, tooling, and measuring equipment properly and safely.Adhere to all Safety Procedures & Policy. Complete all Pure Safety and other safety training as required. Requirements: 3-5 years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Experience in using and interpreting precision measuring instruments, such as micrometers, dial indicators, and depth gaugesDemonstrated ability to read and interpret blueprints, geometric tolerances, and finishes during the application of machining.Ability to work in a team oriented and CIP environmentAbility to read and interpret instructions and drawingsAbility to follow complex verbal and written instructionsAble to stand for long periods, repetitive arm motions, frequent lifting with occasional lifting up to 50 lbs.Ability to work overtime as requiredHigh School Diploma or GED or relevant years of experience in lieu of education Preferred: Machinist certification, training or degree related to machining is a plus.Experience in high mix, low volume manufacturing environmentForklift certification The pay range for this position is $26.17 - 39.26 USD Hourly Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-11717 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Northern Maryland area! Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#UP

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive PayPaid vacation, holidays, and sick time -Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Check us out: A Day in the Life of the Building of the Future - https://youtu.be/pdZMNrDJviY]Check us Out: A Day in a Life at Johnson ControlsPlant Operations https://youtu.be/cjZpE51xySYWhat you will doSuccessful applicants will have a good understanding of standard technical principles, theories, concepts, techniques, and processes. Has a working knowledge of AutoCAD and Drafting standards and applies them towards the execution of Sales Orders or ECNs. Capable of creating and modifying diagrams, piece part drawings and simple assemblies. Has a basic understanding of electrical symbology, geometric dimensioning, and tolerance principles.How you will do itRead and understand technical drawings of components such as instruments, control panels, starters, etc.Work with Engineers, other design personnel and shop personnel to insure proper design.Develop wiring diagrams using AutoCAD Electrical 2024 (Bentley, Plant 3D or Inventor experience a plus).Develop 2D plan, elevation and section drawings of control panels using AutoCAD Electrical. Includes mounting components, terminal blocks, associative dimensioning and avoiding interference between equipment.Develop and implement designs for conduit and/or cable tray installations.Develop bills of material using MS Access database and web-based configuration tools.Check other drawings (peer checking).Work with Operations group personnel to answer questions, make corrections, etc.The ability to multitask and an attention to detail are a must.RequiredRequires an AS degree or equivalent from college or technical school or two (2) years related experience in electrical machinery design. Requires CAD education or equivalent experience. Personal computer working capabilities include email, browser, MS Word, MS Excel, etc.About Us: Johnson Controls is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyouJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Location: Camp Hill, PAJob Type: Full timeShift(s) Available: 1stCompensation: $21.75/hr Benefits Information Medical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesMarathon Health Clinic (Employer sponsored health center)Paid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)ShortTerm Disability and Life InsuranceEmployee Assistance Program (EAP)Employee Discount Principal Accountabilities Working in a wet or humid environment in cold temperatures and around heavy machineryLifting, stretching, standing or sitting for long periods of timeSafely operate a forklift and/or pallet jack to stage finished goods in proper floor locations to await shippingLoading wrapped pallets into designated truckUnloading totes/pallets as needed for productionScanning all totes/boxes to be shipped, recording physical counts and wrapping pallets to be shippedInspect pallet jack/High-Reach to ensure is in good working conditionsEnsure that all food safety procedures and practices are being followedEnsure that all safety procedures and practices are being followedEnsure you are wearing proper personal protective equipment Required Qualifications Must be eligible to work in the United States without Visa sponsorshipMust be 18 years or olderMust be able to operate a high reach truck/stand up forkliftMust be able to operate an electric pallet jackBe sure you are following proper lifting proceduresAbility to lift, stretch, stand, and sit for long periods of time Preferred Qualifications Bilingual preferredPrevious experience on a high reach truckPrior work history in a fast-paced production environment Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Northern Maryland area! Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#UP

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Build your best future with the Johnson Controls team!Johnson Controls is developing the next generation of smart and connected. Through a full range of systems and digital solutions, we make buildings smarter. A smarter building is safer, more comfortable, more efficient, and, ultimately, more sustainable.Who We Are:The FRICK brand is produced by Johnson Controls, a global diversified technology and industrial leader maintaining global industrial refrigeration focused operations and serving customers in over 150 countries. FRICK, the leader in industrial refrigeration, is comprised of many product lines. We have compressors, compressor packages, complete packaged systems, pressure vessels, hygienic air units, heat exchangers, and controls. Your next great opportunity is just a few clicks away!What we offer:Competitive salary Paid vacation/holidays/sick time - 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities Encouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do: As a Mechanical Mechanical Engineer II, you will be a member of our custom product development team. In this role, you will have an influence on the conceptual development, mathematical analysis, detailed design, and overall performance of sophisticated refrigeration products and systems. Also as needed provide support to the salesforce, factory production, laboratory, service, applications, and marketing teams located globally. This position is not eligible for Visa sponsorship.How You Will Do It:Uses standard and sophisticated technical and mathematical principles, theories, concepts, techniques, processes, and standard methodologies in field.Continuously researches equipment operation, materials, industrial processes, and manufacturing equipment.Investigate and analyze product design requirements and cost for recommendations and optimum solutions.Track and control product cost, and warranty expenses. Perform calculations and publish performance dataWork to established schedules to meet internal and external delivery engineering documents. Responsible for the on-time completion of projects.Proficient in mechanical design and be able to conceptualize and implement design ideas into the product.Utilizing mechanical engineering theory and methodologies such as heat transfer, fluid dynamics, failure analysis and refrigeration.Develop mathematical calculations and formulas using multiple variables, and analyze results.Establishes test criteria, participates in laboratory testing, and analyzes test data to identify chiller performance characteristics.Works closely with the design and drafting group in generating product layout concepts and system configurations.Continuously increases expertise on all aspects of product design, theory, construction, operation, and applications.Learns and applies regulatory codes such as UL, ASME, and API.Strives for continuous improvement and teamwork in a global product development and process environment.What We Look For:RequiredRequires a Bachelor’s degree in Mechanical Engineering (ABET accredited)Minimum 4 years’ of experience in an Engineering role.Proficiency in Microsoft suite Applications (Work, Excel, Access and PowerPoint) as well as AutoCAD, Inventor, Internet software and E-mail is required. PreferredExperience with refrigeration and/or industrial refrigeration.SAP experience.Familiarity with ASHARE and/or API Specs.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Location: Camp Hill, PAJob Type: Full timeShift(s) Available:1st & 2ndCompensation: $21.49/hrBenefits InformationMedical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Principal AccountabilitiesWorking in a repetitive and fast-paced environment to complete various processes including weighing, bagging, packing, unpacking, labeling, and boxing of meat productsGeneral use of a knife or other tools/machinery to process meat, including but not limited to trimming and removing fat, defects, or contamination from muscle or tissueMonitoring and programming machinery to ensure process efficiencyUnderstanding and adhering to all safety rules and regulationsMaintaining a safe and clean work environmentExposure to wet and/or humid conditions in a warm or cool environment, as well as slippery surfaces at varied heightsExposure to moving mechanical parts in a fast-paced environmentStanding for long periods of time, the use of stairs, and wearing personal protective equipment (PPE) in designated areas of the facilityOther duties as assignedRequiredQualificationsMust be eligible to work in the United States without Visa sponsorshipMust be 18 years or olderPreferred QualificationsPrior experience operating food processing equipmentPrior experience using a knife in a production or equivalent environmentPrior meat processing experiencePrior experience in a repetitive industrial or fast-paced environmentConsidered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

What you will doThe Test Engineer will “manage” a test throughout the process from test design and planning through execution to completion including preliminary analysis of data results. This individual possesses a working knowledge of HVAC/R equipment and its application. This individual has experience with component or system testing, test procedure development, and mechanical fluid or airflow system design, troubleshooting or operation. They are required to singularly manage the testing process for individual test subjects in order to successfully and efficiently complete testing within the product area. They will conceive, develop, and evaluate plans for solving complex testing challenges. An advanced level team contributor with strong technical expertise in HVAC who will assist in training of personnel in the laboratory as well as defining and supporting the implementation of operational improvement of testing.How you will do it Provide technical communications for test engineering to project customer(s).Plan and execute tests of chillers and components. This may include:- Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.- Significant track record as lead project management over successful mechanical HVAC/R installations- Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.- Meet with product engineering, product management, product technical support or equivalent groups to agree upon and issue test plans.- Work within the test engineering team to schedule tests and required resources.- Provide oversight and input to test technicians for set up of data acquisition software configurations.- Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.- Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive, and participate with creation, of standard procedures, test standards and processes.Works independently with minimal direction. Independently develops approach to solutions.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, or advanced testing services.What we look for BS requiredA minimum combination of seven (7) years direct work experience in the following: HVAC/R equipment development, servicing or testing, with a good understanding of HVAC/R systems, concepts, and diagnostics.Desired background in engineering and development testing, with use of a variety of test instrumentation to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Works under minimal supervision. Ownership of assignments, which are carried out collaboratively within lab team and customer groups. Spear-heads process initiatives within department.High level of product family competency. Recognized expert in one or more technical and operational disciplines within HVAC platform development. Experienced in environments ranging from laboratory to manufacturing/testing facilities to field sites.Able to work in fast-paced, schedule driven work environment. Possess the agility/adaptability to quickly move from one task to another when required.Strong people management & communication skills; willing to confront issues in an open, but tactful wayStrong organization and problem-solving experienceAbility to guide or mentor less experienced technical personnel within teamStrong group communication skills, presentation skillsDemonstrated strong financial and analytical skills (desired)Excellent computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail#LI-SI1#LI-OnsiteJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

What you will doPerforms detailed engineering tasks to include evaluation of engineering alternatives, analysis of data, calculations, CAD drawings, preparation of specifications and reports for the design, development, construction, and commissioning for mechanical, refrigeration, and process (MRP) elements required for HVAC test facilities. This position interacts with engineers, suppliers, and other departments to facilitate project completion. Project work includes MRP systems that simulate precise and extreme environmental conditions including temperature, humidity, precipitation (rain, snow, ice, fog, salt, etc.), air flow, liquid flow, and high-pressure vapor flow.How you will do itDevelop conceptual designs and cost estimates for related MRP project elements during budgeting (Capital Appropriations Request, CAR) and initial project phases.Collect, analyze, and interpret data, develop engineering computer programs (e.g. Excel, EES, LabView) and designs basic process systems, sub-systems, and components.Prepare final designs including drawings, requests for quote (RFQs), bills of material (BOMs), and construction specifications. Responds to contractor and engineering requests-for-information (RFIs).Coordinate with electrical, controls, and other disciplines to facilitate state-of-the-art designs for complete HVAC test facility projects.Create refrigeration and process system designs and develops piping and instrumentation diagrams (P&IDs) for projects that simulate precise and extreme environmental conditions including temperature, humidity, snow, air flow, liquid flow, and high-pressure vapor flow.Review project designs for compliance with applicable national and local codes, engineering principles, industry best practices, company standards and related specifications.Plan and conduct on-site startup, troubleshooting, adjusting, testing and commissioning of MRP systems for all test facility projects.Facilitate all capital planning & executionOperate in compliance with JCI safety, quality, confidentiality, and ethics policies, including completion of recurring on-line training modules with self-certificationPerform other duties as assignedWhat we look forBachelor of Science Degree Mechanical Engineering from ABET accredited university; master’s degree or PE registration preferred.Minimum of 8 years’ experience with mechanical engineering design in the HVAC industry; or 6 years work experience after the completion of a MSME degree or PE license. Working knowledge of applicable industry codes and standards including ASHRAE, AHRI, UL, AMCA, ASME, ANSI, SMACNA, UBC (ICC) and others.Proficiency in Microsoft Windows operating environment, including e-mail and Microsoft Office software; and AutoCAD or equivalent engineering document preparation.Ability to operate independently on detailed individual tasks with a high level of accuracyAbility to multitask and work with various stakeholders as neededStrong organizational and record keeping skillsStrong verbal and written communication skills using EnglishEffective and professional interpersonal skills to contribute as part of internal customer service team#LI-SI1#LI-OnsiteJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

What you will doJohnson Controls has an exciting opportunity available! The Principal Mechanical Engineer position is part of the Building Efficiency AirSide product engineering team based in York, PA. As a Principal Mechanical Engineer, you will have a full range of engineering responsibilities requiring application of standard techniques, procedures, and criteria in carrying out engineering tasks. This team is responsible for all aspects and execution of Air Handling Unit design and application.How you will do itIndependently develops approach to solutions and leads in process improvement. independently withWorks collaboratively to determine best techniques/procedures/theories and applies them to analysis, design or research of mechanical equipment and components related to the HVAC industry.Applies use of statistical analysis and other quality principles and tools. Possesses a mature understanding of advanced statistical analysis tools.Plans complex projects and product releases. Drives for results and plans cross functional work with other departments.Responsible for technical direction of designers and technicians on specific work assignments. Guide and mentor less experienced engineersSkilled at analyzing product design requirements and recommending solutions. Promotes Design for Manufacturability philosophy and simplifies complex specifications into logical design requirements.Able to complete full set of designs for features or products.Prepares, checks, and coordinates the release of documentation to support AHU component design and application.Uses expertise to provide instruction and guidance to others.Defines specifications for multiple features or products. Uses expertise to design a balanced system approach and is cognizant of all associated activities.Prepares and participates in design reviews.Project and product communicator. Able to represent engineering in cross functional activities.What we look forRequiredBachelor’s degree in Engineering (ABET accredited) or related science.5+ years of experience in a mechanical engineering role with experience managing projects.AutoCAD / Inventor experience is beneficial.Must be commuting distance to York, PA, or open to relocation.PreferredHVAC industry experience#LI-SI1#LI-Onsite#MangoJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

What you will do Johnson Controls has an exciting opportunity available! The Principal Mechanical Engineer position is part of the Building Efficiency AirSide product engineering team based in York, PA. As a Principal Mechanical Engineer, you will have a full range of engineering responsibilities requiring application of standard techniques, procedures, and criteria in carrying out engineering tasks. This team is responsible for all aspects and execution of Air Handling Unit design and application.How you will do itIndependently develops approach to solutions and leads in process improvement. independently withWorks collaboratively to determine best techniques/procedures/theories and applies them to analysis, design or research of mechanical equipment and components related to the HVAC industry.Applies use of statistical analysis and other quality principles and tools. Possesses a mature understanding of advanced statistical analysis tools.Plans complex projects and product releases. Drives for results and plans cross functional work with other departments.Responsible for technical direction of designers and technicians on specific work assignments. Guide and mentor less experienced engineersSkilled at analyzing product design requirements and recommending solutions. Promotes Design for Manufacturability philosophy and simplifies complex specifications into logical design requirements.Able to complete full set of designs for features or products.Prepares, checks, and coordinates the release of documentation to support AHU component design and application.Uses expertise to provide instruction and guidance to others.Defines specifications for multiple features or products. Uses expertise to design a balanced system approach and is cognizant of all associated activities.Prepares and participates in design reviews.Project and product communicator. Able to represent engineering in cross functional activities.What we look forRequiredBachelor’s degree in Engineering (ABET accredited) or related science.5+ years of experience in a mechanical engineering role with experience managing projects.AutoCAD / Inventor experience is beneficial.Must be commuting distance to York, PA, or open to relocation.PreferredHVAC industry experienceJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.