What you will doThe Test Engineer will “manage” a test throughout the process from test design and planning through execution to completion including preliminary analysis of data results. This individual possesses a working knowledge of HVAC/R equipment and its application. This individual has experience with component or system testing, test procedure development, and mechanical fluid or airflow system design, troubleshooting or operation. They are required to singularly manage the testing process for individual test subjects in order to successfully and efficiently complete testing within the product area. They will conceive, develop, and evaluate plans for solving complex testing challenges. An advanced level team contributor with strong technical expertise in HVAC who will assist in training of personnel in the laboratory as well as defining and supporting the implementation of operational improvement of testing.How you will do it Provide technical communications for test engineering to project customer(s).Plan and execute tests of chillers and components. This may include:- Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.- Significant track record as lead project management over successful mechanical HVAC/R installations- Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.- Meet with product engineering, product management, product technical support or equivalent groups to agree upon and issue test plans.- Work within the test engineering team to schedule tests and required resources.- Provide oversight and input to test technicians for set up of data acquisition software configurations.- Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.- Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive, and participate with creation, of standard procedures, test standards and processes.Works independently with minimal direction. Independently develops approach to solutions.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, or advanced testing services.What we look for BS requiredA minimum combination of 5 years direct work experience in the following: HVAC/R equipment development, servicing or testing, with a good understanding of HVAC/R systems, concepts, and diagnostics.Desired background in engineering and development testing, with use of a variety of test instrumentation to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Works under minimal supervision. Ownership of assignments, which are carried out collaboratively within lab team and customer groups. Spear-heads process initiatives within department.High level of product family competency. Recognized expert in one or more technical and operational disciplines within HVAC platform development. Experienced in environments ranging from laboratory to manufacturing/testing facilities to field sites.Able to work in fast-paced, schedule driven work environment. Possess the agility/adaptability to quickly move from one task to another when required.Strong people management & communication skills; willing to confront issues in an open, but tactful wayStrong organization and problem-solving experienceAbility to guide or mentor less experienced technical personnel within teamStrong group communication skills, presentation skillsDemonstrated strong financial and analytical skills (desired)Excellent computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail#LI-SI1#LI-Onsite#Mango

Type of Requisition:RegularClearance Level Must Currently Possess:Top Secret/SCIClearance Level Must Be Able to Obtain:Top Secret SCI + PolygraphPublic Trust/Other Required:NoneJob Family:Test EngineeringJob Qualifications:Skills:Test Case Design, Test Case Planning, Test DocumentationCertifications:NoneExperience:5 + years of related experienceUS Citizenship Required:YesJob Description:OverviewTransform technology into opportunity a Test Engineer with GDIT. A career in enterprise IT means connecting and enhancing the systems that matter most. At GDIT you’ll be at the forefront of innovation and play a meaningful part in improving how agencies operate. At GDIT, people are our differentiator. As a Test Engineer, you will help ensure today is safe and tomorrow is smarter.HOW A TEST ENGINEER WILL MAKE AN IMPACT:Ensures the security and effectiveness of our products and systems.Conducts comprehensive testing of cybersecurity systems and products to ensure their security and effectiveness.Develop and implement test plans and procedures based on industry standards and best practices.Identify and report any vulnerabilities or weaknesses in cybersecurity systems or products.Collaborate with cross-functional teams to troubleshoot and resolve any issues found during testing.Stay up to-date on the latest cyber threats and incorporate them into testing strategies.Generate detailed reports and documentation of test results, including recommendations for improvement.Communicate effectively with team members and stakeholders to provide updates on testing progress and findings.Utilize technical expertise to propose and implement solutions for improving cybersecurity systems.Participate in design and code reviews to ensure security is built into the development process.Contribute to the continuous improvement of testing processes and procedures.Adhere to all DIA and DoD for cybersecurity and testing.WHAT YOU’LL NEED TO SUCCEED:Required Education and Experience: BS + 5 yearsCertifications: DoD Manual 8570.01-M at the Information Assurance Technical (IA T) Level I roleSecurity Clearance Level: TS/SCI clearance and ability to obtain and maintain a CI PolygraphLocation: On Customer SiteGDIT IS YOUR PLACE:401K with company matchComprehensive health and wellness packagesInternal mobility team dedicated to helping you own your careerProfessional growth opportunities including paid education and certificationsCutting-edge technology you can learn fromRest and recharge with paid vacation and holidays#octoberThe likely salary range for this position is $88,275 - $118,524. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:NoneTelecommuting Options:OnsiteWork Location:USA MD ElkridgeAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

ELECTROMECH TECH-CLINICAL ENGINEERING Baltimore, MD LEVINDALE HOSPITAL CLINICAL ENGINEERING Full-time - Day shift - 8:00am-4:30pm Support Services/Security/Trade 85906 $24.00-$41.85 Experience based Posted:November 5, 2024Apply NowSave JobSaved SummaryJOB SUMMARYUnder limited supervision performs preventive maintenance, repairs and provides user support on mechanical and electromechanical equipment such as, but not limited to, hospital beds, stretchers,mobility devices, fixing and cleaning wheelchairs, scales and patient liftsJOB REQUIREMENTS:Entry level knowledge; basic employment skills. Degree or HS Diploma not required. Minimum one year experienceMonday-Friday 8 am to 4:30 pm, no on callAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELY for over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

The Johns Hopkins Health System Corporation is a not-for-profit organization dedicated to providing the highest quality of care in the treatment and prevention of human illness. JHHS is an academically based health system consisting of: The Johns Hopkins Hospital, Johns Hopkins Bayview Medical Center, Johns Hopkins Howard County Medical Center, Suburban Hospital, Sibley Memorial Hospital, The Johns Hopkins All Children’s Health System, Johns Hopkins Community Physicians, The Johns Hopkins Medical Services Corporation and Johns Hopkins Medical Management Corporation. One organization.Countless opportunities.The Radiological Physics Division (RPD) was initially established in July 2002 as the Division of Medical Imaging Physics (DMIP) with the recruitment of Benjamin Tsui and his 14 associates in 2018, George Sgouros became director of the division. It was rebranded as the Radiological Physics Division to expand its mission beyond imaging so that all of radiological physics, including radionuclide therapy is encompassed.The mission of our Physics department is to:Conduct state-of-the-art research in medical imaging physics, especially in the areas of nuclear medicine, including PET and SPECT, and X-ray imaging, including CT.Establish a graduate degree program in medical imaging physics within the Department of Radiology and Radiological Science.Provide physics education to residents, fellows and technologists.Provide clinical physics support to various clinical divisions of the Department of Radiology and Radiological Science. Johns Hopkins is currently searching for a full time Physicist to support will support imaging modalities such as computed tomography, interventional angiography, fluoroscopy, digital radiography, mammography/stereotactic breast biopsy, MRI and ultrasound. You will collaborate with the chief medical physicist, physicians, technologists and others to ensure diagnostic imaging quality and radiation dose optimization for imaging equipment.What Awaits You Career growth and developmentEmployee and Dependent Tuition Assistance Diverse and collaborative working environmentAffordable and comprehensive benefits packageOur competitive Benefit Package is designed to support the well-being and financial security of our employees. You can explore the details of our benefits offering by visiting the following link: https://jhhs.mybenefitsjhhs.com/Minimum qualifications:Masters of Science or Doctoral degree in Medical Physics, Radiology Physics, or related disciplineThree (3) years of active experience (including residency) with diagnostic imagingBoard Certification in Diagnostic Radiological Physics by the American Board of Radiology is preferredWill consider candidates who recently graduated from CAMPEP accredited imaging residency programShift:Full Time (40 hours)Day Shift8:30m - 5:00pmSalary Range: Minimum 53.79 per hour - Maximum 88.82 per hour. Compensation will be commensurate with equity and experience for roles of similar scope and responsibility.In cases where the range is displayed as a $0 amount, salary discussions will occur during candidate screening calls, before any subsequent compensation discussion is held between the candidate and any hiring authority.JHM prioritizes the health and well-being of every employee. Come be healthy at Hopkins! Diversity and Inclusion are Johns Hopkins Medicine Core Values. We are committed to creating a welcoming and inclusive environment, where we embrace and celebrate our differences, where all employees feel valued, contribute to our mission of serving the community, and engage in equitable healthcare delivery and workforce practices.Johns Hopkins Health System and its affiliates are drug-free workplace employers.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Our client, a leader in innovative building solutions, is seeking a Senior Power Electronics Engineer to join their team. As a Senior Power Electronics Engineer, you will be part of the Engineering Department, supporting the Power Electronics Team. The ideal candidate will have strong problem-solving skills, attention to detail, and excellent communication, which will align successfully in the organization. Job Title:Senior Power Electronics Engineer Location: New Freedom, PA Pay Range: $ 65-70/hr (W2 Contract) What’s the Job Power Conversion Design: Lead the design and testing of AC-DC and DC-AC conversion systems. Motor Control Development: Develop and test motor control systems for various applications. System Simulation and Modeling: Utilize MATLAB/Simulink for system modeling, simulation, and verification. Prototype Testing: Conduct prototype testing on hardware-in-the-loop systems and variable speed drives to verify control performance. Quality Compliance: Ensure compliance with quality policies, procedures, and instructions during the development and testing phases. What’s Needed Educational Background: BS with 10 years of experience or MS with 5 years of experience in Power Electronics. Technical Expertise: Proficiency in AC-DC and DC-AC conversion, motor control design, and testing. Simulation Skills: Experience with MATLAB/Simulink for system modeling and verification. Testing Proficiency: Ability to conduct hands-on testing, including setup and use of lab equipment such as oscilloscopes and DMMs. Communication Skills: Strong communication skills and the ability to work effectively in a team environment. What’s in it for me Benefits: Medical, Dental, Vision, 401k with Match Weekly pay with direct deposit Holiday Pay Referral Rewards Monthly Recognition Programs Dedicated Career Partner to help you achieve your career goals If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.**This Engineering role can be filled at Mid-level or Senior Engineer level.Please see minimum qualifications list below for each level**Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations while acting as a resource and technical expert to engineers. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.Provide technical expertise and consultation through direct involvement and as a subject matter expert when consulted to identify and resolve equipment and system problems.Directly fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Perform engineering tasks as assigned by supervision applying engineering principles.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Mid-level E02 EngineerB.S. in Mechanical Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Mechanical Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSProfessional Engineer RegistrationAdvanced technical degree or related coursework

What you will doThis position is responsible for managing the technical staff conducting testing operations at the JADEC facility. The operations consist of multiple test stands serving multiple JCI business units (Chillers, AHU, Marine/Navy). Test labs operate 3 shifts and employ 70+ operators, test engineers and technicians.How you will do it Lead and manage lab engineering team to support the execution of all testing in the lab balancing the needs of the customers with the available resourcesManage necessary operational metrics to assure maximum efficiency and effectiveness of the operationWork with the test lab customers, that primarily consist of product development engineers, to achieve excellence in testing quality and on time delivery.Implementation and prioritization of operational improvement of testing for greatest impact relative to investment. Support achievement through continuous interaction of activities with the engineering team membersEffectively use technical expertise with industrial chillers and hydronic systems to assist the test engineering team with solving complex issues and facilitate the sharing of knowledge across the team.Create and expend automation opportunities to increase overall utilization of facilities as well as efficiency of operationsDrive, and participate with creation, of standard procedures, test standards and processes.Development of new procedures, processes, and resources as necessary to provide more efficient, accurate, or advanced testing services.Test lab team interacts with many other internal departments in the Chiller business. This position is responsible to ensure strong connection with the leaders of these other teams and assist in escalation of issues that threaten productivity or on-time completion of test tasks or product development activities. These departments primarily include:Product Development Engineering Team(s)Advanced Development & Technology Engineering TeamsProgram/Project ManagementJCFS Engineering Team(s)Support the planning and execution of chiller and component testing by ensuring the following actions are taken:Participation in the development, receipt, and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support or equivalent groups to agree upon and issue test plans.Work within the test engineering team to schedule tests and required resources.Provide oversight and input to test technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.What we look for BS required; MS preferredA minimum of eight (8) years’ experience managing HVAC/R equipment development, servicing or testing, with a high level of understanding of HVAC/R systems, concepts, and diagnostics.Candidate must be well organized and capable of managing numerous competing prioritiesAbility to work under minimal supervision and take ownership of assignments, which are carried out collaboratively within lab team and customer groups.Experience building and leading teamsExcellent people management & communication skills with ability to develop and maintain professional relationshipsStrong organization and problem-solving experienceAbility to guide or mentor less experienced technical personnel within teamStrong group communication skills, presentation skillsExcellent computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail#LI-SI1#LI-Onsite#mango

Type of Requisition:RegularClearance Level Must Currently Possess:Top Secret/SCIClearance Level Must Be Able to Obtain:Top Secret SCI + PolygraphPublic Trust/Other Required:NoneJob Family:Systems EngineeringJob Qualifications:Skills:IT Systems Management, Microsoft Endpoint Configuration Manager, Microsoft Endpoint Configuration Manager ReportingCertifications:NoneExperience:8 + years of related experienceUS Citizenship Required:YesJob Description:OverviewTransform technology into opportunity a Systems Engineer with GDIT. A career in enterprise IT means connecting and enhancing the systems that matter most. At GDIT you’ll be at the forefront of innovation and play a meaningful part in improving how agencies operate. At GDIT, people are our differentiator. As a Systems Engineer, you will help ensure today is safe and tomorrow is smarter.HOW A SYSTEMS ENGINEER WILL MAKE AN IMPACT:Performs design and performance improvement of organization and Information Technology operations and business objectives.Collects, analyzes and interprets data in one or more specialties.Formulates and defines system scope and objectives, develops or modifies processes to solve complex problems for computer systems and business and electronic interfaces to achieve desired results through the use of innovative technologies.Develops and applies advanced engineering and design methods, theories and research techniques in the investigation and solution of complex and advanced system requirements, hardware/software interfaces and applications and solutions.Translates customer requirements into formal agreements and plans to culminate in customer acceptance or results.Execute a wide range of process activities beginning with the request for proposal through development, test and final delivery.WHAT YOU’LL NEED TO SUCCEED:Required Education and Experience: BA/BS + 8 yearsSecurity Clearance Level: TS/SCI clearance and ability to obtain and maintain a CI PolygraphLocation: On Customer SiteGDIT IS YOUR PLACE:401K with company matchComprehensive health and wellness packagesInternal mobility team dedicated to helping you own your careerProfessional growth opportunities including paid education and certificationsCutting-edge technology you can learn fromRest and recharge with paid vacation and holidays#octoberThe likely salary range for this position is $116,979 - $157,082. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:NoneTelecommuting Options:OnsiteWork Location:USA MD ElkridgeAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

STATIONARY ENGINEER Randallstown, MD NORTHWEST HOSPITAL MAINTENANCE Full-time - Evening shift - 2:00pm-10:30pm Support Services/Security/Trade 86275 $31.94-$47.91 Experience based Posted:November 3, 2024Apply NowSave JobSaved SummaryJoin a group of seasoned, supportive teammates in a clean and well maintained plant! Other benefits include regular infrastructure investment, robustrecognition program and team building events in a fun department!JOB SUMMARY:Responsible for inspections, preventative maintenance, and general maintenance of utilitiessystems to prevent breakdowns and ensure safety and reliability while maintaining peak efficiencyJOB REQUIREMENTS:Formal working knowledge; equivalent to an Associate's degree (2 years college); requires knowledge of a specialized field, 3 to 5 years of experience, State of Maryland First Grade Stationary Engineer licenseAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.&bull **This Analyst role can be filled at the Mid-level or Senior level. Please see minimum qualifications list below for each level**&bull&bull Expected salary range:&bull Mid-level: $ 84,000 - $ 104,00&bull Senior Level: $109,000- $142,000 PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvides in-depth technical expertise to develop, manage and implement engineering activities and programs.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provides initial or complete task management of engineering issues.Perform engineering and technical tasks as assigned by supervision applying general engineering principlesAccountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Engineering Analyst/E02&bull 4-yr tech degree and 2+ yrs of nuclear or related industry experience OR&bull 2-yr tech degree and 3+ yrs of nuclear or related industry experience OR&bull High School Diploma and a min of 5 years applicable nuclear experienceMINIMUM QUALIFICATIONS for Engineering Analyst/E03&bull 4-yr tech degree and 5 + yrs of nuclear or related industry experience&bull 2-yr tech degree and 7+ yrs of nuclear or related industry experienceHigh School Diploma and a min of 8 years nuclear experience

Nature and Scope:The Senior Product Engineer is responsible to contribute to the product team through product design, testing, data analysis, and project management. The Engineer will also support the manufacturing of the product, representing the design team through initiating and executing design changes. All of these tasks also require strong communication skills and the ability to clearly present information to engineering teammates, engineering managers, product management, and business leaders.This position is a part of a global chiller engineering team. The engineer will work under the product engineering manager to assist design and development of new products and support production of existing products globally. The engineer will be expected to lead and participate in various engineering activities to resolve factory and field technical issues.Primary Responsibilities:Maintains understanding of theories, concepts, technical principles and processes related to mechanical and electrical aspects of chillersHas proficiency in mechanical design and be able to conceptualize and implement design ideas into the productWorks closely with the design and drafting group in generating chiller layout concepts and system configurations Generates engineering/design documentation and compiles technical documents for use within the companyPrepares and executes test programs to verify performance and reliability of electrical and mechanical components and systemsReviews and analyzes test data and provides input for design and troubleshootingApplies regulatory codes such as UL, CE, PED and ASME in product designPossesses knowledge of manufacturing processes and applies the philosophy of designing to standard manufacturing processReports on the status of the projectsStrives for continuous improvement and teamwork in a global product development environmentOccasional domestic and international travel (Approximately 10%)Qualifications:BS in Engineering (ABET accredited) or related science or equivalentMinimum 5 years’ experience in a related fieldExperience in a design and product development environmentBasic understanding of fundamental business knowledgeKnowledge/experience in electrical engineering (electric motor, motor control, electrical wiring ) would be a plusStrong design background and knowledge/experience in refrigeration system and components (compressors, heat exchangers) would be a plus#LI-SI1#LI-Onsite#mango

Type of Requisition:RegularClearance Level Must Currently Possess:Top Secret/SCIClearance Level Must Be Able to Obtain:Top Secret SCI + PolygraphPublic Trust/Other Required:NoneJob Family:Software EngineeringJob Qualifications:Skills:IT Application Development, IT Systems Development, Software Development EnvironmentsCertifications:NoneExperience:8 + years of related experienceUS Citizenship Required:YesJob Description:OverviewTransform technology into opportunity a Software Engineer with GDIT. A career in enterprise IT means connecting and enhancing the systems that matter most. At GDIT you’ll be at the forefront of innovation and play a meaningful part in improving how agencies operate. At GDIT, people are our differentiator. As a Software Engineer, you will help ensure today is safe and tomorrow is smarter.HOW A SOFTWARE ENGINEER WILL MAKE AN IMPACT:Responsible for designing, creating, implementing, and integrating software with data repositories or independently performs exceptionally complex software development tasks.Ensures efficient delivery of contract capabilities using industry and DoD standards and repeatable processes.Must have experience utilizing agile/XP (Extreme Programming) techniques and languages.WHAT YOU’LL NEED TO SUCCEED:Required Education and Experience: BA/BS + 8 yearsSecurity Clearance Level: TS/SCI clearance and ability to obtain and maintain a CI PolygraphLocation: On Customer SiteGDIT IS YOUR PLACE:401K with company matchComprehensive health and wellness packagesInternal mobility team dedicated to helping you own your careerProfessional growth opportunities including paid education and certificationsCutting-edge technology you can learn fromRest and recharge with paid vacation and holidays#octoberThe likely salary range for this position is $136,000 - $184,000. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:NoneTelecommuting Options:OnsiteWork Location:USA MD ElkridgeAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary.Paid vacation/holidays/sick time -15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care -Available day oneExtensive product and on the job/cross training opportunitiesWith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out: A Day in a Life at Johnson Controls:What you will doServe as a Senior Engineer within the Power Electronics Department based in our Applied Chiller group in New Freedom, PA! Candidates must be commuting distance, or open to relocation.Responsible to design, test, and maintain power electronics products and systems for Johnson Controls’ chiller applications.Determine the best techniques, procedures and/or theories as they apply to the development of power electronics products and systems.Create compliance procedures for the development of electrical/electronic circuitry designs.Define and interpret design specifications; design electrical/electronic circuitry to meet specified requirements; and analyzes product design requirements and recommend solutions.Prepare and coordinates the release of documentation to support component design and manufacturing.Participate in all aspects of preliminary design and systems architecture, and conducts analysis of the cost impacts of proposed modifications, upgrades, and new implementations of application software.Conduct feasibility studies and systems analysis for new applications or major modifications of existing systems.Work with other engineers, designers, and technicians on specific work assignments.Forecast and schedule work activities, and defines processes for repetitive tasks.Act as the technical lead for troubleshooting field and factory issues on the range of power electronics products and systems on Johnson Controls’ chillers.Travel to visit customers, Johnson Controls’ factories, vendors, and/or professional conferences as business needsHow you will do itComply with Johnson Controls’ Code of Ethics and policiesEffectively utilize your knowledge, skills, and Johnson Controls’ toolsCollaborate with global and cross-functional teamsIs open minded to receive and offer constructive feedbacksIs flexible to support customers and businessOpen to hybrid work out of our New Freedom PA facilityAbility to work in a fast-paced, schedule-driven, team-oriented environmentAbility to travel 10% of their time domestic or internationalWhat we look forRequiredMaster degree on Electrical Engineering with specialization on Power ElectronicsMinimum 7+ years of industry experience in the field of power electronics or electrical engineeringPreferredPh.D. degree with focus in Power ElectronicsStrong experience on power electronics controlsStrong experience on IGBT based invertersStrong experience on advanced tools such as Matlab/Simulink, OPAL-RT, Saber#mango

What you will doJohnson Controls has an exciting opportunity available! The Principal Mechanical Engineer position is part of the Building Efficiency AirSide product engineering team based in York, PA. As a Principal Mechanical Engineer, you will have a full range of engineering responsibilities requiring application of standard techniques, procedures, and criteria in carrying out engineering tasks. This team is responsible for all aspects and execution of Air Handling Unit design and application.How you will do itIndependently develops approach to solutions and leads in process improvement. independently withWorks collaboratively to determine best techniques/procedures/theories and applies them to analysis, design or research of mechanical equipment and components related to the HVAC industry.Applies use of statistical analysis and other quality principles and tools. Possesses a mature understanding of advanced statistical analysis tools.Plans complex projects and product releases. Drives for results and plans cross functional work with other departments.Responsible for technical direction of designers and technicians on specific work assignments. Guide and mentor less experienced engineersSkilled at analyzing product design requirements and recommending solutions. Promotes Design for Manufacturability philosophy and simplifies complex specifications into logical design requirements.Able to complete full set of designs for features or products.Prepares, checks, and coordinates the release of documentation to support AHU component design and application.Uses expertise to provide instruction and guidance to others.Defines specifications for multiple features or products. Uses expertise to design a balanced system approach and is cognizant of all associated activities.Prepares and participates in design reviews.Project and product communicator. Able to represent engineering in cross functional activities.What we look forRequiredBachelor’s degree in Engineering (ABET accredited) or related science.5+ years of experience in a mechanical engineering role with experience managing projects.AutoCAD / Inventor experience is beneficial.Must be commuting distance to York, PA, or open to relocation.PreferredHVAC industry experience#LI-SI1#LI-Onsite#Mango

The Senior Product Engineer is responsible for contributing to the product team through product design, testing, data analysis, and project management. This role also supports the manufacturing of the product by representing the design team in initiating and executing design changes. Strong communication skills and the ability to clearly present information are essential. The Senior Product Engineer is expected to develop and maintain skill sets and work practices that align with the organization’s expectations and needs.How You Will Do It:Master theories, concepts, technical principles, and processes related to fluid, thermal, and other mechanical aspects of water-cooled chillers.Take a lead role in the timely completion of programs and regularly report on the status of projects.Demonstrate proficiency in mechanical design and the ability to conceptualize and implement design ideas into the product.Apply mechanical codes such as UL, CE, PED, and ASME.Work closely with the design and manufacturing teams to generate layout concepts and system configurations that balance cost, performance, and reliability.Coordinate and lead execution of test programs to validate the performance and reliability of mechanical systems and components.Analyze, design, modify, and/or troubleshoot mechanical sub-components and sub-systems based on test data.Generate and review technical documentation for use within the product team.Occasionally travel domestically and internationally (less than 10%).What We Look For:BS in Mechanical Engineering or related science.3-6 years of experience in a related field.Testing and data analysis experience: ability to hypothesize, build test procedures and prototypes, execute tests, analyze critically, make changes based on test results, and implement product development or existing product changes.Candidates with backgrounds in real-world building, fabrication experience, electromechanical systems, communication protocols (such as CANBus, Modbus, and Serial protocols), turbomachinery (especially centrifugal compressors), tribology, magnetic levitation bearing technology, and pressure vessel design will be particularly well-suited for this role.Teamwork and Culture:Teamwork and the ability to work with many teams are essential in our global product development environment. Each of these virtues must be consistently displayed with a focus on continual improvement of our team culture.Humble: willing to sacrifice self-interests for the success of the team.Hungry: diligent, self-motivated, and always looking for new opportunities to contribute.Smart: able to read and interpret people and situations.#LI-SI1#LI-Onsite#Mango

What you will do Johnson Controls has a phenomenal opportunity for a Staff Embedded Software Engineer to join our team located in New Freedom, PA, and contribute to the design and development of our cutting-edge Chiller products! Candidates must be commuting distance to New Freedom, PA, or able to relocate.As a Staff Embedded Software Engineer, you will have the opportunity to design, develop, and implement embedded software solutions for our products. You will work closely with cross-functional teams, including hardware engineers, product managers, and quality assurance teams, to deliver high-quality software that meets performance and reliability standards. This position is ideal for an individual looking to take their career to the next level in a challenging and rewarding environment!How you will do it Design, develop, and implement embedded software for various applications and platforms.Collaborate with hardware engineers to define system architecture and specifications.Write efficient, maintainable, and reusable code in C/C++ or other relevant programming languages.Conduct code reviews and provide constructive feedback to ensure adherence to best practices and coding standards.Develop and execute test plans to validate software functionality and performance.Troubleshoot and debug embedded systems, identifying and resolving software and hardware issues.Mentor and guide junior engineers, promoting knowledge sharing and best practices within the teamWhat you will needRequired Bachelor’s degree in Computer Science, Electrical Engineering, or a related field.10+ years of experience in embedded software development.Proficiency in programming languages such as C/C++, Python, or similar.Strong understanding of embedded systems architecture and real-time operating systems (RTOS).Experience with hardware/software integration and debugging tools (e.g., oscilloscopes, logic analyzers, JTAG).Familiarity with version control systems (e.g., Git) and software development methodologies (Agile, Scrum).Preferred Familiarity with wireless communication protocols (e.g., Bluetooth, Wi-Fi, Zigbee).Knowledge of embedded Linux or other operating systems.Experience in developing automated testing frameworks and strategies.Familiarity with equipment communication protocols (e.g., BACnet, CAN, Modbus).#mango

What you will doAs the Manufacturing Engineering Coordinator you will help support our chiller equipment test engineeringteam. You will work directly with test engineers, product design engineers, and labor staff to support projects within the equipment research and development test lab. This will include projects for collecting operating data from chillers and their sub-components, improving test efficiency, reducing cost, improving data quality, continuous improvement / efficiency improvements, and sustaining test operation across several test stations simultaneously. The labor operations include rigging and moving various size chillers in and out of test stations, performing assembly and dismantling of chiller components and systems for modifications, connecting temporary water piping to systems, installing test instrumentation, operating the chillers and compressors and collecting data via computerized control system.How you will do it Provide Technical support and assistance to test engineers and operation supervisors.Configure, setup, and monitor for expected operation of various temperature, pressure and power meters and measuring devices using established company procedures and schedules.Understand and provide technical recommendations to the labor force for operation of the chiller test facility pumping and air handling systems.Work with product engineering team members to establish good execution sequences for chiller and component testing.Perform process analysis for cost reductions, quality improvements, and improved efficiency.Develop work procedures to improve work processes, equipment and facility operation, or engineering test.Collaboration with vendors for maintenance of tools and purchase of production improvement items.Implementation and maintenance of Safety requirements for equipment and processes throughout the lab.Provide direction to test lab personnel on specific work assignments.Strong interaction with product design department to ensure outcomes are understood and met.Troubleshoot nonconforming systems and components.Adheres to the Company’s Code of Conduct and Business Ethics standards.What we look for BS in Mechanical/Production Engineering3-5 years engineering experience in manufacturing environmentKnowledge of lean production processesProficiency in Microsoft Office suiteUnderstanding of standard technical principles, theories, concepts, techniques, and processes.Self starter highly motivatedPreferredKnowledge of HVAC equipment#LI-SI1#LI-Onsite#Mango