We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Pay Rate: $15.00/hr - $25.73/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Company:US3063 Sygma Pennsylvania (The Sygma Network, Inc)Sales Territory:NoneZip Code:17110Travel Percentage:0COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factorsJOB SUMMARYTo provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability.MONDAY TO FRIDAY 11:00PM TO 7:30AM$27.00 TO $35.00 PER HOUR BASED ON EXPERIENCE$600 ANNUAL TOOL ALLOWANCERESPONSIBILITIESPerform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.Perform FAI/CVI (First Article Inspection/Commercial Vehicle Inspection) (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment by all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment.Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer).Address all Driver Vehicle Inspection Report write ups timely, and efficiently.Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.Follow procedures including documenting all work performed on work orders.Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility.May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible.Proficient in electrical meter testingKnowledge of controls and electric (DC low voltage)Electric motor knowledge (DC)Complete electrical repairs and welding projects as needed.QUALIFICATIONSEducationMedium/Heavy Duty truck technical training 2-year schoolHigh school diploma or GED requiredExperience4 years of experience OR5 years of experience in fleet maintenance and repairCurrent and valid driver’s license (CDL Preferred, Not Required)Professional SkillsAnnual Inspector Certification Knowledge, Skills and AbilitiesBrake Inspector Certification Knowledge, Skills and AbilitiesASE certifications – Automotive or Medium/Heavy Duty Trucks (preferred not required)EPA section 608 (Core & Type II) and 609 HVAC – Refrigeration CertificationWorking knowledge of computer-based diagnostic software for OEM’s and component manufacturersExpert knowledge and skill of all vehicle systems and componentsExpert knowledge and skill in diagnosis and repair of electrical systems on all equipmentExpert knowledge and skill in diagnosis and repair of refrigeration systems (Expert knowledge and skill in Preventive Maintenance Inspections and repairModerate knowledge and skill in welding and cutting (gas, electric, MIG, TIG)Moderate computer skills and knowledgeExpert knowledge of all DOT (FMCSA) regulationsModerate knowledge of OSHA safety regulationsModerate knowledge of environmental regulationsPhysical DemandsRegularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear.Frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.Occasionally required to sit and must frequently lift and/or move up to 100 lbs.Requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.Ability to operate various pieces of equipmentAbility to stand, sit, walk, bend, reachAbility to push/pullAbility to lift /carryAbility to grasp toolsAbility to perform Repetitive motion: wrenches and hand toolsWorking conditions: Frequently works outdoors.Work EnvironmentOccasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.Works non-traditional business hours including evenings, nights, weekends, holidays and on-call.Occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).Occasionally exposed to high, precarious places and confined spaces.Occasionally exposed to fumes or airborne particles.The noise level in the work environment is usually moderate.BENEFITS INFORMATION:For information on Sysco’s Benefits, please visit https://SyscoBenefits.comOVERVIEW:Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations.We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service.AFFIRMATIVE ACTION STATEMENT:Applicants must be currently authorized to work in the United States.We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law.This opportunityis available through Sysco Corporation, its subsidiaries and affiliates.

Seize Your Opportunity! 50% Rental Discount Pay: $21.00 to $23.00/hour See additional benefits below! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Senior Maintenance Technician at our properties. As a Senior Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle. Live within a 30-minute commute of the properties. HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience.Must successfully pass a criminal background check and drug screen. Benefits of Employment: Pay Range: $21 - $23 per hourUp to 50% Rent Discount Property Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4417 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time-10 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!:https://youtu.be/pdZMNrDJviYWhat you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of serviceHow you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads.Manages assigned work to meet professional and efficient execution of time and customer satisfaction.Reportsproblems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally.Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals.Install and modify software and graphics.Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work.Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to allcontrol'stechnicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors.Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required.Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment.Compilesjob documentation, such as certificate of completion, customer training form, training certificates and punch lists.Conducts extensiveself-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company.Other duties related to the installing,commissioningand servicing of building controls and facilities management systems and energy management systems, as assigned.Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations,and billof material, network layouts and electrical schematics as required.Assists in developing and testing software programs necessary to operate the system per the project requirements' intent.Compiles and/or completes project as built and close-out documentation.Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation.Selects, orders, and tracks the delivery of materials for assigned.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.May provide field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with project field team.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business.Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems.Vocational School program graduate or associate's degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is seeking an Automation MaintenanceTechnician at all levels. As a Maintenance Technician you will be responsible forrepairing and calibrating our automated and robotic systems. These systems are Symbotic’sautomated adapters, vertical lifts, and Symbotic’s fleet of automated robotic vehicles.You will be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure.As the Maintenance Technician you will become the system expert including all mechanical, PLC, electrical or electronic subsystems.What we doOur Automation Maintenance Technician team is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.What you’ll doPerform inspections on systems associated with Automated Storage and Retrieval System of automated robotic vehicles and Automated Adapters/ Lifts.Lead continuous operation by adjusting, calibrating, repairing, replacing or modifying system components.Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.Troubleshoot automated robotic vehicle anomalies and stoppages using schematic and wiring diagrams as well as advanced test equipment.Perform periodic system inspections within expected durations on all equipment and thoroughly document all actions and repairs to include parts used and labor. Ensure quality maintenance and complete documentation via the Computerized Maintenance Management System (CMMS).Effective communication of production impacting problems and suggested actions, including approximate time required for corrective and emergency maintenance to required team members.Must be able to work in a dynamic environment and change course based on immediate business needs.Cleanup of equipment and removal of replaced parts from work areas after repairs are completed.Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.Responsible for minor utility work such as machining holes, brackets; cutting steel; aligning sensors; attaching Unistrut; etc.).Responsible for troubleshooting, calibration, set up, and tool changes on Robotic arms.Responsible for continuous cleaning and adhering to 5S policies.Perform Cell Operator functions as needed.Other duties as assigned by leadership.What you’ll needAssociate degree and/or certification in electronics, automotive, automation, manufacturing or equivalent work experience preferred.A minimum of 3 years of experience with mechanical automation systems or educational/training equivalentManage and lead advanced troubleshooting skills and ability to follow electro-mechanical diagrams.Must be able to operate and run Automated systemsExperience with PLC (Programmable Logic Controller) knowledge and troubleshooting.Advanced troubleshooting skills and ability to follow electro-mechanical diagrams.Proficient in performing all Inspection functions.Ability to work independently of supervisor following procedures and manuals.Our EnvironmentThere will be steep stairs to climb into the structure.You will regularly be near railings that are high off the ground.Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.If the site location is in construction, you will be required to wear proper PPE (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness).Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms.The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. to stand; climb or balance and stoop, kneel, crouch, or crawl.Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols.#LI-DM1#LI-OnsiteAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Job Summary: Operate and maintain press to production standards and quality. Set-up, adjust and operate equipment to print and fold signatures, ensuring expectations of customer specifications. Duties/Responsibilities: Review job jackets and plan work process to ensure meeting of customer specifications Monitor assigned press machine during run to ensure adherence to specificationsPerforming quick and efficient make-readies, product size changeover and folder changeoversPerform preventative maintenance and troubleshoot machine problems, resolving if possible, notifying GPS or Print Process Manager as neededProvide training, as required, to Assistant in machine operation and safetyComplete and maintain all required paperwork, job jackets, records, documents, timekeeping, etc. Follow all required safety procedures such as: PPE’s, Ergonomics, and etc. Performs job in a manner that protects the health and safety of all employees. Assist with housekeeping in the Press areaOther duties as assigned Basic Qualifications: High School Diploma or GEDStrong math and mechanical skills.Ability to effectively communicate with other employees Desired Skills and Abilities: Previous Press experience is preferredKnowledge of a variety of small hand tools and precision measuring devices is preferred Physical Requirements Ability to frequently transport and position materials weighing up to 65 pounds CJK Group is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Work Together, Succeed Together – Maintenance Technician Needed! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws.Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $18.00-$22.00 /hr.Up to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC6140 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Overview: Sheetz Store Support is hiringEquipment Service Techniciansto join our World Class maintenance team. Our technicians maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.