We are looking for a Heavy Equipment Mechanic to join our team and perform mechanical repairs with minimal supervision to ensure proper performance and safety.
Maintains diesel & gasoline equipment operations by completing inspections and preventive maintenance requirements; correcting vehicle deficiencies; making adjustments and alignments; keeping records. Position has a good working knowledge of all tools and equipment required to diagnose, troubleshoot and repair possible problems. Full time, hourly position. Candidate is a skilled heavy vehicle, diesel and mobile equipment mechanic with the ability to diagnose most problems and perform the appropriate repairs. This position routinely requires moderate to extreme physical exertion and may require prolonged standing, bending, kneeling, squatting and working in awkward positions. You will be exposed to extreme weather conditions, dust, dirt and shop environment, as well as traffic during road calls.
Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts. Keeps equipment available for use by field personnel by completing preventive maintenance schedules; installing component and part upgrades. Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. Tunes, adjusts, regulates equipment engines, valves, pumps, carburetors and other mechanical components with variable setting. Lubricates and services vehicles, equipment or machinery and maintains accurate record of such service. Enters all truck tasks and time into fleet management software. Verifies vehicle performance by conducting test drives; adjusting controls and systems. Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards. Maintains vehicle appearance by cleaning, washing, and painting. Assists with keeping shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance. Contains costs by using potential warranty; evaluating service and parts options. Updates job knowledge by participating in educational opportunities; reading technical and regulation publications. Enhances department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Regularly participates in the housekeeping of the mechanic shop to ensure a safe work environment; to include sweeping, cleaning up spills, using appropriate containers for rags, keeping walkways clear of clutter, returning tools/parts to appropriate storage containers/area, closing doors on cabinets, etc. Troubleshoot and diagnose equipment & vehicle problems to determine method and extent of repairs needed. Read, interpret, analyze and apply information in technical manuals, computer programs and schematics. Perform preventative maintenance and repair of on-road vehicles. Safely operate equipment, standard and specialty tools, welders, hoists and other lifting devices, etc. on a daily basis. Maintain work area and shop in a clean, organized and safe manner. Follow all company safety policies and procedures. Other duties may be assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Skills: Must have good working knowledge of all tools and equipment required to diagnose, troubleshoot and repair possible problems. Skilled heavy vehicle, diesel and mobile equipment mechanic with the ability to diagnose most problems and perform the appropriate repairs.
Education and Experience: High school diploma or equivalent is required. Diesel Experience Required Must possess a basic understanding of hydraulic and electrical systems Must have experience in welding and metal fabrication Must have a valid driver’s license with a good driving record.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 155,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location:Hazleton, PAJob Type:Full TimeShift Available:2ndCompensation:$23.75 -$37.75/hr Benefits Information Overtime PotentialVacation & Holiday PayHealth Insurance401(k)Tuition ReimbursementLife Insurance & Short Term DisabilityEmployee Discounts Principal Accountabilities Understanding and adhering to all safety rules and regulationsMaintaining a safe and clean work environmentTroubleshooting and repairing electrical and mechanical failuresRecommending changes, modifications, or upgrades to equipment to improve machine reliability and performanceReading electrical circuit drawings and documents, and mechanical drawings and documentsDocumenting completed work, modifications to equipment, findings, and parts information as requiredExecuting assignments in a timely manner with minimal supervisionPerforming other duties assigned Required Qualifications Must be eligible to work in the united states without visa sponsorshipMust be 18 years or olderAt least one year of experience troubleshooting electrical and mechanical issues on industrial equipmentAt least one year of experience using hand tools and maintenance troubleshooting equipmentAbility to understand and communicate in English (verbal/written) Preferred Qualifications Certification in Industrial Electricity I, II, and IIICertification in Motor ControlsExperience troubleshooting with PLC’s.Working knowledge of fluid power, hydraulics, and pneumaticsPrevious experience with Precision MaintenanceOne year of experience TIG WeldingIndustrial Building MaintenanceAmmonia refrigeration experienceAmmonia certificationsAt least two years of experience working in a fast-paced manufacturing environmentExperience with root cause analysis and continuous improvementBasic computer skillsSAP Experience Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ELIGIBLE FOR SIGN-ON BONUS - $3,500! Salary Commensurate w/ Experience Summary: The Maintenance Technician is responsible for the scheduled, unscheduled and preventative maintenance and repair of a wide variety of beverage manufacturing and packaging equipment requiring a strong mechanical skills base to include: hydraulics, pneumatics, electrical, conveyor systems and PLC usage. Essential Functions Effectively complete preventive and proactive maintenance per the schedule to prevent breakdowns on equipment.Utilize root-cause analysis skills to investigate breakdown and line stoppages while collaborating with other departments.Initial responder when a line stops producing and assures that the appropriate mechanical help is on site to correct any problems quickly using electrical and/or mechanical skills.Prioritizes work to ensure timely maintenance, repair and installation of equipment, tools and utility systems to minimize manufacturing downtime and completes all required paperwork and documentation in the Computerized Maintenance Management System (CMMS).Repair or maintain the operating condition of industrial production or processing machinery or equipment including inspection, assembly, disassembly, and replacement as necessary.Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.Operate newly repaired machinery or equipment to verify the adequacy of repairs.Analyze test results, machine error messages or information obtained from operators to diagnose equipment problems.Inspects operating machines and equipment for conformance with operational and safety performance standards.Support the facility’s food safety and food quality programs to assure compliance and achieve desired results.Perform other duties as required by supervisor. Requirements Education & Experience: Three (3) plus years experience in industrial manufacturing maintenance required.Electrical/electronic troubleshooting and repair skills required.Candidates will be required to take a Mechanical (Electrical) Skills and Aptitude Assessment in order to be considered. Position-Specific Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.Demonstrated ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.Ability to use Microsoft Office (Outlook, Word, Excel).Ability to work flexible hours if needed. Physical Requirements Must beable to occasionally lift and/or carry up to 100 pounds.Must be able to push and/or pull up to 25 pounds.Must be able to continuously stand and/or walk for extended periods of time on concrete surface.Ability to repeatedly kneel, bend, crouch, reach, climb and/or stoop throughout the shift as needed to successfully perform job duties.Successful completion of a post-offer drug screen and background check required. Refresco is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, national origin, color, religion, age, genetics, sex, sexual orientation, gender identity, disability or veteran status.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and commission planPaid vacation/holidays/sick time Comprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities With outstanding internal resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, Tools and Equipment to complete all jobsProviding Scheduling and management supportJCI Employee discount programs (The Loop by Perk Spot)Check us Out: https://youtu.be/pdZMNrDJviYWhat you will do:Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Fire Suppression systems and product lines as well as similar competitive manufacturers’ product lines.How you will do it:Work with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredFire alarm license and able to obtain and retain any licenses that are required by National, State and Local codes.3 years' experience for this role documented service experience in fire alarm or fire sprinkler. Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.Preferred NICET certification #TechHiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. Education and Experience: Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $22 - $28 / hour #CAZL ExperienceRequired1 year(s): Experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.1 year(s): Experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systemsEducationPreferredHigh School or betterHigh School or better

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.Water might seem simple enough, but there is a lot going on beneath the surface. Working in a factory or warehouse requires rolling up your sleeves to get things done and the tenacity to go the extra mile again and again. We believe the rewards are worth the effort: a business you help shape, a supportive team you learn from, and the chance to have a sustainable impact in which you can truly be proud.Job DescriptionWe are seeking a Maintenance Supervisor who will be part of the leadership team for our manufacturing plant. This leader will work on a day shift to support daily maintenance operations and a team of up to 36 mechanics. This facility operates 24x7 and this person will flexibility to be on call as needed.Key responsibilities include: • Part of the Maintenance leadership team responsible for plant technical operations, specifically production line maintenance, processing equipment maintenance and utility equipment maintenance • Assist with leading the preventative maintenance process, defining processes, driving improvements and achieving KPI targets • Coach, mentor and develop front line employees to meet current and future business requirements • Help lead change initiatives and continuous improvement efforts, including the implementation of a LEAN manufacturing environment • Utilize and model our beliefs in the execution of daily work activities and decision making • Build relationships with frontline team members to help create and maintain a positive work environment • Partner with internal customers and suppliers, colleagues and support services to ensure achievement of targets • Understand and adhere to internal and external regulations, procedures & policies • Maintain cleanliness to GMP standards and ensure all safety standards are met * • Effectively communicate safety, quality, technical and training issues to team • Review daily maintenance effectiveness to identify opportunities for improvement and work with the Operations team to get resolution • Ensure the development and implementation of action plans to address root causes of failuresQualificationsKey qualifications include: • Five or more years of experience in industrial maintenance with at least two or more years of experience in a leadership capacity • Prior experience in a beverage, food, CPG (consumer packaged goods), or other clean manufacturing environment with familiarity with quality, GMP and hygiene regulations preferred. • Prior experience with pneumatics, hydraulics, electric systems and PLC control systems and communication systems. • Knowledge of preventative maintenance programs with a grasp of financial factors in maintenance. • Strong computer skills including Microsoft Suite applications; business management software (SAP preferred) needed. • Understanding of production processes & technical troubleshooting and root cause analysis skills. • Continuous improvement or process improvement experience with prior TPM experience preferred. • Effective communication and presentation skills with the ability to facilitate change • Time management, delegation and organization skills with strong problem solving ability • Ability to grow relationships with business partners and to lead, coach and develop employees • Schedule flexibility with the ability to provide on call coverage.BlueTriton Brands offers an extensive portfolio of highly recognizable, responsibly sourced and packaged spring water, purified water and water beverage brands that include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, Splash Blast® and Splash Fizz®. BlueTriton Brands also owns and operates ReadyRefresh®, a customizable water and beverage delivery service that has been certified as a CarbonNeutral® business. Based in Stamford, Connecticut, BlueTriton Brands and its affiliates in the United States and Canada employ over 7,000 employees. BlueTriton Brands manages resources for long-term sustainability and helps to safeguard more than 20,000 acres of watershed land. The Company has 28 production facilities across the United States, 13 of which are Alliance for Water Stewardship ("AWS") certified across 12 sites, with eight of the certified facilities being AWS Platinum, the highest-level certification.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

AutoReqId: 20449BR Pay Class: Hourly Hourly Pay Rate: 27.44 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials is seeking a Mobile Fleet Mechanic Trainee for our Penns Park facility located in Newtown, Pennsylvania. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Perform repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment components.Maintain proper tool/parts inventory for specified jobs.Rebuild trucks or other motorized equipment engines and component parts.Complete maintenance projects in a timely manner to ensure production goals.Maintain up to date written or data input spreadsheets on all equipment repairs.Ensure that all equipment repairs are performed accurately to the manufacturer standards.Performs other miscellaneous mechanical and maintenance duties as assigned. What We Are Looking For Prior maintenance experience preferred on heavy mobile equipmentWelding experience desiredOpen pit mining operations and aggregate products experienceFrequently lift 25 pounds; occasionally lift up to 70 pounds.MSHA training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

360 NJ-31, Washington, NJ 07882Automotive Service Technician All Levels Needed!!Sign-on and Relocation Bonus for Qualified Candidate!!Competitive Hourly Pay + Benefits!Rossi Auto Group has been a vital part of the community for more than 40 years. We believe culture makes a difference and we strive to build lasting relationships with our employees, customers, and the community. We are looking for experiencedService Technicians – for ourChrysler Dodge Jeep Ram store. We believe our employees are our greatest asset and invest in their success.We offer: Competitive Hourly Pay!!Medical, Dental, and Life insurance401(k) retirement planPaid vacations and holidaysSign-on / Relocation Bonus for Qualified Applicant!!!On-going trainingState-of-the-art service facilityFast-paced and professional workplace.Responsibilities - Service Technician:Inspect vehicle and diagnose the problem(s)Perform quality repair/maintenance work that meets dealership and manufacturer standards including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc.Provide an estimate of time and parts needed for repair/maintenanceLearn new technical information and techniques in training sessions to stay current with rapidly changing technology.Keep shop neat and account for dealership owned toolsOther duties may be assigned according to skill level and certificationQualifications - Service Technician:Dealership Service Technician experience is requiredValid driver's license with an acceptable driving recordExperience with the latest automotive technologies and working knowledge of shop equipment such as wheel and tire equipment, alignment system, diagnostic equipment, AC equipment, etc.Flexible and focused on maintaining a high level of customer serviceGood work ethic and problem-solving skillsA positive attitude and works well as part of a teamUpload resume and complete online assessment for immediate considerationMust pass a pre-employment background check, MVR, and drug screen.Applicants must be authorized to work in the U.S. and be current residents.We are an equal opportunity employer and prohibit discrimination/harassment, without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience.Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: While performing the duties of this job, the employee is regularly required to reach with hands and arms. This employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Forklift Operator - Overnights - Entry LevelPay from $27 to $34 per hour - That's up to $67,000 - $85,000 per year with bonuses!Pennsylvania Distribution Center8449 Congdon Hill Drive, Alburtis, PA 18011Accuracy. Efficiency. Safety. Join Uline's all-star Distribution Center team as an Overnight shift Forklift Operator! In this entry-level role, you’ll receive on-the-job training and certifications to load and unload shipments with care. We continue to grow as North America's top distributor of shipping, industrial and packaging materials, creating new career opportunities and job stability you can count on!Hours:Sunday - Thursday, 8:30 PM to 5 AM.Position ResponsibilitiesUnload shipments from suppliers, verifying order accuracy.Load trailers with product for delivery to branches.Manage stock and inventory control.Minimum RequirementsHigh school diploma or equivalent.Frequently move packages weighing up to 70 lbs.Excellent attention to detail and time management skills.BenefitsComplete medical, dental, vision and life insurance coverage, Flexible Spending Accounts and wellness programs.401(k) with 6% employer match.Paid holidays and generous paid time off.Tuition Assistance Program that covers professional continuing education.Bonus programs that include annual performance, sales goals and profit sharing.Employee PerksBest-in-class, clean, modern facilities.Company-provided uniforms.About UlineUline is North America's leading distributor of shipping, industrial and packaging materials. We're a family-owned company known for incredible service, quality products and same-day shipping of our huge in-stock inventory. With over 9,000 employees across 13 locations, it's time you joined Uline.Uline is proud to operate as adrug-free workplace.EEO/AA Employer/Vet/Disabled#LI-TF2#LI-PA001(#IN-ECDCWH)

ESSENTIAL DUTIES & RESPONSIBILITIES: • Abide by all Safety regulations and policies• Must wear all required PPE for any task/job currently being performed• Meet all production standards and efficiencies focusing on Safety, Quality, Delivery, and Cost based on current routings/times• Perform daily housekeeping task. Help maintain 5S standards in your work location and whole department• Must be willing to work outside of your current Job Classification and Department as qualified and needed• Must complete First Piece Inspection protocol and related paperwork• Read blueprints to determine components that must be welded, and number of welds needed• Assemble and weld various components to meet appropriate quality and production standards• Sand and grind welds as needed to meet appropriate quality and production standards• Self-sufficient on start-up and shutdown equipment procedures• Select appropriate weld setting to obtain a quality weld• Operate all necessary equipment to assemble and weld components• Perform quality checks of parts as needed including effective use of calipers, micrometers, and functional gauges• Must be able to perform quality welds to steel and/or aluminum components and meet all code requirements on welds• Work with other employees to complete assemblies on multiple person operations• Check welds for strength• Check and inspect all parts• Move finished assemblies to appropriate areaJOB QUALIFICATIONS: • High School diploma or equivalent• Basic mechanical abilities• Basic mathematical abilities (addition, subtraction, multiplication, and division)• Organizational and communication skills• Desire to learn new skills and improve knowledge• Strong orientation toward:o Safety, quality, and continuous improvement demonstrated by a work history of safe performance, accuracy and attention to detail in the work performed, constructive problem solving and suggestions for improvement, ability to effectively implement or respond to change, punctuality and consistent work attendance• Understanding and support of Company policies and procedures, including those related to Safety• Must be able to attain MIG welding certification, current certification desired but not required• Able to accurately read blueprints• Able to identify all components needed to complete assembliesPHYSICAL DEMANDS AND WORK ENVIRONMENT • Will be working in a manufacturing plant with varying climate• Must be able and willing to work daily and weekly overtime as required• Able to stand continuously for 8 to 10 hours daily• Able to lift, push and/or pull up to 33lbs individually and up to 66lbs as a team• Able to grasp continuously• Able to frequently walk, reach, push and pull• SPECIAL CONSIDERATIONS: N/A We Don't Just Build The World, We Build Innovative Technology Too. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you'll get the unique chance to impact some of the world's most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights. Who We Are We're the World's largest tool company. We're industry visionaries. We're solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art "smart factory" products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company. Benefits & PerksYou'll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You'll Also GetCareer Opportunity: Career paths aren't linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development: Our lifelong learning philosophy means you'll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities). Diverse & Inclusive Culture: We pride ourselves on being an awesome place to work. We respect and embrace differences because that's how the best work gets done. You'll find we like to have fun here, too. Purpose-Driven Company: You'll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices. EEO Statement: All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic. If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password. Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Aspire Bakeries is a North American baking company with a leadership position in specialty frozen baked goods. Formed from leading bakery companies, its innovative food portfolio includes breads, artisan breads, buns, cookies, donuts, muffins and pastries from beloved brands like®,®, and®. With 13 bakeries in North America, we are committed to driving innovation, predicting upcoming consumer trends and flavors, and exceeding our customers’ expectations. Aspire Bakeries champions the values of Integrity, Ownership, Customer Focus, Creativity and Care to help us deliver on People Safety, Food Safety, Quality and Collaboration. Supervises maintenance technicians, performs maintenance activities, schedules employees and coordinates activities to keep bakery running in 24/7 environment. Supervises and assists in repairs, breakdowns, alignment, troubleshooting and operations of building and plant equipment. Initiates preventative maintenance action, schedules and supervises preventative maintenance activities. Responsibilities:Supervise and provide lead technical knowledge in repair of breakdowns and troubleshooting.Prepare technician schedule for 24 hour / 7 day operation line coverage and preventative maintenance activities, and recommend overtime allocation as necessary.Collaborate with Maintenance Manager to document plant needs for fiscal year, including cost value of equipment repair or replacement.Maintain repair schedules on equipment.Manage department performance measures, including visual controls and provide regular progress reports to managerPerform other duties as assigned or required.Qualifications:A high school diploma or GED is preferred. Bachelor’s degree in mechanical/electrical or chemical engineering is preferred.7 years of experience in a manufacturing environment including leadership experience preferred.Programmable Logic Controls (PLC) electrical troubleshooting knowledge.Experience with ammonia and the PSM Standard preferred.Maintenance/Engineering expertise in hydraulics, mechanics, process and electrical functions of equipment.Computer literate with proficiency in Excel and Word for spreadsheets and reports.Shift:2ndAspire Bakeries is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Overview: Now Hiring a Maintenance Mechanic II at our Hazleton, PA location!Role: Support in the form of installation, repair, and maintenance on all related equipment, buildings, and systems associated with the FK manufacturing facility. Completes tasks independently; and as a team member.Reports to: Asset Care Team Leader (Gary Swire)Shift/Schedule: 12HR night shift 6:30am-6:30pmAlternating 36 hour / 48 hour work weeksWeek 1: 36 hrs Week 2:48 hrsWeek 3: 36 hrs Week 4:48 hrsStarting Pay: $28.26/HR , paid weekly with a $1.50 night shift differentialOur Social Responsibility platform features a robust, employee-led Give Back program, which includes a matching gifts plan, community grants initiative, and our annual Company-wide Month of Action campaign. With each of these initiatives, our employees are empowered and equipped to give back to their communities and support the non-profits important to them and their families. Through our Give Back program, we own our commitment to Social Responsibility and live our purpose of Packaging a Better Future. Responsibilities: Key Job Requirements:Diagnose and repair faulty production and related plant equipment with the minimum amount of supervision using the provided schematics, manuals and drawings. Be able to diagnose and repair electro-mechanical problems, troubleshoot electrical problems and have a strong understanding of preventative maintenance strategiesIdentify faulty parts and provide proper nomenclature in the form of a requisition in order that spares or replacements can be orderedBe knowledgeable of what and where spare parts are in the storerooms and to observe store rooms withdrawal and return procedureGeneral working knowledge of machine shop equipmentMust be team-oriented with leadership qualities and capable of leading co-workers in assigned tasksWill be expected to maintain necessary records and established maintenance proceduresMaintain a clean, safe working environmentResponsible for additional specific duties related to each shift as assigned by maintenance supervisorOther duties as necessaryTechnical Competencies: Administrative: Demonstrates ability to accurately post data from one source to another in ERP or peripheral software systems.Communication/Teamwork:Ability to communicate effectively and work closely and productively as part of a cross-functional teamAbility to create and/or exhibit an atmosphere of openness, honesty, trust, and teamworkAbility to multi-task and prioritize as needed without loss of effectiveness and composureSafety: Demonstrates ability to understand and actively participate in all company safety programs, policies and procedures.Quality: Ability to develop and maintain processes that are ISO compliant.Technical Knowledge: Demonstrates an advanced comprehensive knowledge of entire process from concept to commercialization. Operate Equipment:Ability to operate motorized equipment and other peripheral equipment safely and efficiently as requiredDemonstrates ability to utilize standard hand toolsAbility to operate basic machine shop equipmentMaintenance/Repair:Demonstrates advanced mechanical aptitude and abilitiesDemonstrates thorough knowledge of production technological methods and procedures, and capabilities of machines and equipment in manufacturing facilities Qualifications: Education & Experience:Three to five years of experience in a related fieldMechanical pretest to employmentHigh school diploma/equivalent requiredCompletion of a vocational or trade school curriculum from an authorized school with a concentration in electro-mechanical courses desiredMust be able to read and use precision type instruments such as micrometers and calipersSpeaking and presentation skills to conduct effective meetingsMust be able to pass multi-choice with handwritten section testADA – Essential Functions:Must be able to:Work a 8, 10 and/or 12-hour shift, standing and walking for extended periodsClimb Heed safety warnings, devices and alarms Communicate effectively both verbally and in writingLift and carry products weighing up to 50 lbs.Possess an adequate ability to do problem solving and establish cause and effect relationships in an office and/or manufacturing environment.Benefits:Eligible for benefits first of the month following hire dateMultiple medical and prescription drug coverage optionsChoice of an Employer-Funded Health Care Account (HCA) or Health Savings Account (HSA)Integrated healthcare programs – telemedicine, chronic condition, weight management and msk healthMultiple dental and vision plan coverage optionsFlexible spending accounts (FSA)Healthcare, dependent care Company provided life and accidental death, short and long-term disability programsSupplemental life, accidental death, and disability buy-up optionsAccident, critical illness, and hospital indemnity insuranceEmployee well-being reward programEmployee assistance program (EAP)Child and family care support programEducational assistance and tuition reimbursement programEmployee discount program401(K) with 6% company match (Eligible to participate from day one (1) with 100% vesting in all company provided money immediately)Pactiv Evergreen is one of the largest manufacturers of fresh food & beverage packaging in North America, with market leading positions across a broad range of products. We bring our Purpose of Packaging a Better Future to life by producing and distributing high-quality products – many made with recyclable or renewable materials – to food and beverage manufacturers, packers and processors, supermarkets, restaurants, foodservice outlets and other institutions. To learn more, please visit our website at pactivevergreen.com.Pactiv Evergreen will make every attempt to reasonably accommodate every applicant of the company. Attempts will be made by the company to reasonably accommodate candidates that have Substantial Limiting Major Life Activities.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingTuition reimbursementGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doThe HVAC Service Sales Rep is critical to the overall growth and profitability of the HVAC Service business! The chosen candidate will be responsible for initiating, establishing, and building profitable service relationships between new customers and JCI. Focus on selling renewable maintenance agreements as the key building block for establishing these relationships. The salesperson will work within an assigned geographic territory, working as part of a local branch office and teaming with sales and operations professionals within the branch. Uses sales tools to plan and document sales progress as well as increase business opportunity in current accounts. Expected to obtain and close business on a monthly basis. How you will do it Follows a disciplined and professional process to identify, target and qualify prospective new customers; takes advantage of market conditions and networks effectively to uncover new leads and contacts. Contacts prospective customers and schedules appointments. Builds a referral network to identify new customers.Conducts sales calls designed to identify key sources of problems and/or dissatisfaction confronting Facility Directors in operating and maintaining heating/cooling, ventilation and control system equipment.Develops a sense of urgency to resolve needs and positions Johnson Controls as the supplier of choice. Proposes solutions to prospective customers needs through creative and innovative application of local branch service capabilities with a focus on selling renewable maintenance agreements with an emphasis on digital service offerings, sustainability, and decarbonization. Understands the customer's business and speaks their language.Reviews and finalizes proposals with prospects and secures their commitment to the Johnson Controls solution.Conducts customer kick-off meetings, resolves customer issues, creates pull-through opportunities, maintains service agreements, extends service agreements and supports the collections process.Keeps management informed of progress and account status using the Johnson Controls Salesforce.com tool and other means. Knows when to call for assistance from management to keep the sales process moving.Develops and implements territory marketing plans consistent with the Johnson Controls Building Solutions business strategy. Attends and presents at trade shows. Participates in professional organizations.Represents Johnson Controls professionally by conducting business according to the highest standards of quality, pride, integrity, and performance. What we look forRequired:2-3 previous progressive sales roles Preferred:Aptitude for technical knowledge with high level of attention to detail Enviable presentation skills complete with the ability to captivate in both individual and group communications. Selling of "service" and intangibles Exposure to sales methodologies, standards, and disciplines. Bonus Qualifications Knowledge of Building HVAC Systems Knowledge and experience in SalesForce.com Post-secondary education#SalesHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 19609BR Pay Class: Hourly Hourly Pay Rate: 28.47 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials is seeking a 2nd shiftPlant Maintenance Mechanic for our Downingtown facility located in Downingtown, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications.Work in all areas of the plant as neededEnsure compliance with all health, safety and environmental regulations, and with company policies and procedures; perform daily equipment inspections, as well as identify and assist in correcting unsafe conditions Here's what we're looking for High School Diploma or equivalent requiredPrevious experience in open pit mining operations and aggregate products a plus.Ability to work different shifts, holidays and/or overtime as required.MSHA part 48 training a plus.Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below the shoulder, work extended periods of time in the same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 50 lbs., working confined spaces, capable of wearing respiratory and other personal protective equipment. No Search Firms Please. Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.ReadyRefresh brings hydration that supports a healthy lifestyle, and convenience that preserves precious time and sustainability to help improve our world. Our ReadyRefresh branches and warehouses are where our iconic brands begin their journey to the customer.Job DescriptionBoth experienced professionals and recent technical college graduates are encouraged to apply. This is a great opportunity for an entry level candidate to get advanced training in the field of Point of Use (bottle-less water cooler) filtration systems and office coffee equipment. Professional training/ certification for this technical role is offered through on the job training. Our Field Service Technicians that perform equipment repairs on routes are key to our success.Schedule: Monday - Friday, start time between 6:00 - 7:00 am, 1st Shift, Full-TimePay: $27.90 / hour (starting rate based on experience)Benefits: Medical, dental, vision, prescription, life insurance, short-term and long-term disability, 401(k) with company match, tuition reimbursement, paid vacation, paid time off, employee assistance, referral program and much more! Day 1 benefit enrollment and vacation accrual starts!Key Responsibilities Complete installations, repairs, troubleshooting and maintaining plumbed-in Point Of Use equipment (Water - Filtration) and office coffee brewing equipment per field service standards and procedures Ensure all work is performed to quality standards and customer expectations Maintain courteous and professional contact with customers to ensure satisfaction and leverage up-sell opportunities Must meet pre-established productivity targets (egg, 8-10 completed stops per day) Charging fees as appropriate for work performed Maintain and organize tools, equipment, parts (Direct Division Materials) and truck inventory Responsible for providing feedback regarding equipment and parts to help drive supplier improvement Support our Direct division sales teams with customer site assessments and system installations Record service activities and other data in hand-held computer Other duties may be designed as necessary as it relates to the needs of the positionRequirementsQualificationsRequirements A high school diploma, GED, or equivalent experience Previous experience working with Point Of Use equipment and/ or Office Coffee brewer equipment, and or other related product lines is preferred Prior HVAC experience, plumbing experience, water filtration, and/or auto mechanical technical experience is strongly preferred but not required No driving-related suspension, revocation or cancellation, no disqualifying offenses, no more than 2 moving violations No major driving offenses including DUI/DWI, reckless driving, refusal to test, leaving the scene, driving a commercial vehicle without a CDL, or at-fault fatal incident Be an articulate verbal communicator Possess strong organizational skills and a customer centric focus Display a high degree of initiative combined with a commitment to high quality work standards Be technically inclined and detail oriented Be able to work both independently and as part of a teamBlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience.Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.Water might seem simple enough, but there is a lot going on beneath the surface. Working in a factory or warehouse requires rolling up your sleeves to get things done and the tenacity to go the extra mile again and again. We believe the rewards are worth the effort: a business you help shape, a supportive team you learn from, and the chance to have a sustainable impact in which you can truly be proud.Job DescriptionWe are currently seeking Full-time Maintenance Mechanics for our manufacturing/bottling facility to maintain, fix, and improve equipment used in bottling and packaging operations.Starting Pay: $37.17 / hour, plus increases after 90 days and 180 days (upon successful reviews) 6%-8% of base hourly rate night shift differential paid for applicable hours workedSign On Bonus: $2500 payable after 90 days of employmentBenefits: 401(k) matching; dental insurance; flexible spending account; health insurance; life insurance; paid time off and holidays; vision insurance; short-term and long term disability insurance; career stability and growth!Schedule: First Shift Monday - Friday 5:00 AM - 3:00 PMResponsibilities include but are not limited to:Perform maintenance tasks to include repairing and improving, from minor rebuilds to major overhauls on all equipmentDismantle, clean, repair, and test electrical, electronic, and mechanical components to determine component-level failureSupport equipment installations, retrofits and upgrades to include vendors and contractorsMaintain preventative maintenance logs and accurate records of all testing and repairsIdentify all potential mechanical and electrical issues with equipment throughout the plantTroubleshoot/ investigate and repair all mechanical, electrical, pneumatic, and utility systems including chillers, air compressors etc.QualificationsKey qualifications include but are not limited to:High School Diploma, GED or equivalent work experience3 (three) or more years of proven maintenance experience in a manufacturing environmentStrong technical knowledge of compressed air systems (pneumatics), electricalsystems, hydraulics and water processing is preferredPreventive maintenance, mechanical and electrical repair, troubleshooting using a data driven systematic approach, rebuilding equipment, lifting, rigging, lubrication.Successfully demonstrates strong mechanical abilitiesMust have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motorsAbility to do physical inspections, (i.e. climbing, reaching, extending)Proficient with mechanical drawings and OEM technical prints for parts identificationCandidates must be flexible to support Business needs, able to work holidays, weekends, and overtime; and to be able to work (On Call) in emergency situations.BlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do Perform inspection, testing and maintenance/repair of Wet, Dry, Pre-Action and Deluge Sprinkler systems in accordance with NFPA and State of Department of Health. Candidate should have the ability to accurately discern, and document deficiencies found during aninspection.How you will do it Knowledge of fire pumps, backflows and standpipes is a plus. Attention to detail with the ability to communicate with employees, employers, customers, and authorities having jurisdiction both written and verbally is desired.What we look for Required:Requires a high school diploma or equivalent.NICET Level II certification.Three years field experience with Wet, Dry, Pre-Action and Deluge Sprinkler systems.Functional knowledge of Wet and Dry Sprinkler Systems.Valid driver's license with good driving record.Ability to stand or climb stairs and ladders for a long period of time.Ability to lift a minimum of forty (40) pounds without assistance.Excellent "Customer Service Skills".Good written and oral communication skills and good organizational skills.Must be able to pass a pre-employment security, drug and background check.Preferred: Knowledge of fire pumps, backflows, and standpipes a plus.Johnson Controls is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please viewEEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visitwww.johnsoncontrols.com/tomorrowneedsyou.Terms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience.Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

ENSURING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:• Competitive Starting Pay• Paid Training• Global Advancement Opportunities• Company Vehicle (as applicable)• Referral Bonuses• Comprehensive Benefits• Medical/Dental/Vision insurance• Health Savings Account (HSA)• Life Insurance• 401(k) savings plan with company match• Short-Term and Long-Term Disability• Employee Assistance Program• Wellness Program• And More!What you will do:Service Technicians diagnose problems and perform service and repairs on card access, CCTV, burglar alarm systems,electronic fire alarm systems and other related building system products at customer sites.Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do it:Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment.Service, troubleshoot, and installcard access, CCTV, and burglar alarm systems.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals.Exhibit effective customer service skills by consistently communicating with staff and customers to ensure customer satisfaction.Complete Service Acknowledgements with proper coding through communication devices such as smart phones and laptop computers.Obtain customer signature upon completed service call assignment.Available for on-call emergency service.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.Perform other duties as assigned.What we look for:Required1-3 years documented experience with card access and CCTV.Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.Experience installing, inspecting, repairing, and programming card access and CCTV.Fire alarm experience is a plus.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Retain any licenses that are required by National, State and Local codes.Knowledge of applicable NFPA standards.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience.Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Be part of the future!We are one team, dedicated to working collaboratively to createthe purposefulsolutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, andwe’llgive you the space and opportunities to grow and succeed.We are committed tomakea difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAndMore!What you will do:This is a team leadership role.Fire Sprinkler Installation employeesare responsible forthe installation, service, and repair of fire protection systemsincluding:wet, dry, pre-action, deluge, and foam suppression systems; as well as fire pumps and back flow devices. Installer III and IV employees are also responsible for the execution of the installation project plan including equipment delivery, accurately forecasting installation hours,anticipatingpotentialchallengesand properly securing all Tyco SimplexGrinnell tools and equipment at the end of each work periodso as toprevent damage or loss.How you will do it:Applies judgment based on practice and precedence.Mayallocatework as a team leader, bringing all changes, discrepancies, and coordination problems that impair installation activities to the immediate attention of the construction manager.Frequently resolves problems through the research of multiple alternatives. Mustmaintainproper documentation for all work performed.May review project drawings to obtain all facts necessary to perform installation activities according to specifications.Must be able to work alternative shifts or weekends to meet customer and/or job requirements.May berequiredtoparticipatein a scheduled after hours on-call rotation. Must adhere to all company safety policies and procedures.May berequiredto perform Inspections.What we look for:Required 3-5 years documented experience in installation and service of fire sprinkler systems.High School Diploma or equivalent required.Holds a state sprinkler journeyman card. (askHM is this needed)Follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools weighing up to 70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc.Read and understand construction blueprints, diagrams, and specifications used in installation activitiesAbility to work flexible hours.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Excellent communication skills, using tact and diplomacy when dealing with customers and team members.Strong organizational skills, positive attitude, andan abilityto learn quickly.Licenses may be required where applicable.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Position Summary: The production line mechanic will be responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. This role involves applying mechanical expertise in determining work methods and procedures for producing quality product. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Responsibilities: Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assigned Requirements: High School Diploma or GED3-5 years’ experience in a maintenance of Injection Molding Presses within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties Physical Demands: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, couch or crawl; and talk or hear. The employee must occasionally lift up to 50 lbs. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctionsContact customer representative and ascertain equipment/systems problemsDiagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sitesFollow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipmentService, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnellRead and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manualsExhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfactionComplete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computersObtain customer signature upon completed service call assignmentParticipate in a scheduled On-call rotationHelp to train or mentor others on the service teamProvide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of servicePerform other duties as assignedHow you will do it:This skilled position involves troubling shooting and repairing installed systems. Including panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testing.Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks.Candidate must possess excellent written/verbal communication and outstanding customer service skills.Position involves the programming of fire alarm, security, and access control system panels.Experience CCTV and IT and IP networks a plus.Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner.On call and after hours work required on occasion at customer need.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look for:Required5+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems.NICET ll Level II certification - PreferredExperience in reading and interpreting blueprints, submittals, and operational/product manuals.Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.High School Diploma or equivalentAbility to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etcAbility to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Retain any licenses that are required by National, State and Local codes.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.