$5,000 RETENTION BONUS FOR ELIGIBLE NEW HIRES! SHIFT: Sunday - Friday, 11:00 PM - 7:30AM PAY: $32.00/hour Benefits medical, dental, vision, 401K, life insurance, strong safety culture, and much more! Excellent local leadership.Main Ingredients of the JobTroubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increasedresponsibility and Certifications.Performs other duties as assigned.What you bring to the table:Must have (3 ) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.***EOERace/Color/Religion/Sex/SexualOrientation/Gender Identity/National Origin/Protected Veteran/Disability Status***

Job Description:Position Details:Monday-Friday 11:00am - 8:00pmPay: $29.00 per hour up to $37.00 per hour, based on experienceBenefits Day 1 of Employment!We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class B keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities: The Diesel Technician – Class B performs preventative maintenance of medium to heavy-duty trucks, trailers, reefer units, and convertor dollies under minimal supervision. Responsibilities may include, but not limited to:Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and performs repairs as required.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:High School Diploma/GED or Equivalent 3 - 5 years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and experience in refrigeration.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 155,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location:Hazleton, PAJob Type:Full TimeShift Available:2ndCompensation:$23.75 -$37.75/hr Benefits Information Overtime PotentialVacation & Holiday PayHealth Insurance401(k)Tuition ReimbursementLife Insurance & Short Term DisabilityEmployee Discounts Principal Accountabilities Understanding and adhering to all safety rules and regulationsMaintaining a safe and clean work environmentTroubleshooting and repairing electrical and mechanical failuresRecommending changes, modifications, or upgrades to equipment to improve machine reliability and performanceReading electrical circuit drawings and documents, and mechanical drawings and documentsDocumenting completed work, modifications to equipment, findings, and parts information as requiredExecuting assignments in a timely manner with minimal supervisionPerforming other duties assigned Required Qualifications Must be eligible to work in the united states without visa sponsorshipMust be 18 years or olderAt least one year of experience troubleshooting electrical and mechanical issues on industrial equipmentAt least one year of experience using hand tools and maintenance troubleshooting equipmentAbility to understand and communicate in English (verbal/written) Preferred Qualifications Certification in Industrial Electricity I, II, and IIICertification in Motor ControlsExperience troubleshooting with PLC’s.Working knowledge of fluid power, hydraulics, and pneumaticsPrevious experience with Precision MaintenanceOne year of experience TIG WeldingIndustrial Building MaintenanceAmmonia refrigeration experienceAmmonia certificationsAt least two years of experience working in a fast-paced manufacturing environmentExperience with root cause analysis and continuous improvementBasic computer skillsSAP Experience Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range:Mid-level or Job title $98,100 - $109,000Senior-level or Job title $113,000 - $122,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.This position is open for a mid-level Instrument and Control instructor and a SR Instrument and Control instructor and can sit out of Coatsville, PA, or Exton,PA. PRIMARY PURPOSE OF POSITIONDemonstrates mastery of skills and extensive subject matter knowledge in carrying out assignments associated with the analysis, design, development, implementation, evaluation, and modification of plant specific nuclear maintenance and technical training programs.PRIMARY DUTIES AND ACCOUNTABILITIESDrives station and personnel performance improvement through the use of training. Coordinates, and conducts performance-based maintenance and technical training programs as required by user community in accordance with Constellation's TSD model, department procedures, and with proper application of the analysis, design, development, implementation, and evaluation phases.Assures the training programs are maintained current and incorporate information gained from INPO Significant Operating Experience Reports and Constellation NERs, NRC Circulars, Bulletins, and Information Notices, plant design change and backfit information, plant procedure changes and revisions, new regulations, and training effectiveness reports.Prepares trainee examination and conducts trainee evaluations for classroom, laboratory, OJT, and simulator environments, as appropriate and conducts counseling sessions for trainees, evaluates the results, and recommends/develops individualized training programs.Support station and fleet in the areas of business initiatives, project management, refuel outage support, EP duties, and special projects.Participates in NRC, INPO and management audits, and prepares responses to audit findings.Maintains knowledge of plant operations, disciplinary skills and techniques, commensurate with the responsibility to develop and conduct effective, high-quality training.Supervises the collection and maintenance of auditable training records and reports required to document training program activities.MINIMUM QUALIFICATIONS MID-LEVEL I&C InstructorHigh School diploma3+years previous technical or craft nuclear experience OR5+ years of related industry experienceEffective written and oral communication skillsMINIMUM QUALIFICATIONS SR I&C InstructorHigh school diploma5+years of nuclear technical background OR7+ years of related industry experience2+ years in training/educationEffective written and oral communication skills PREFERRED QUALIFICATIONS MID-LEVEL INSTRUCTORAS/AA in science/engineering5+ years of nuclear power plant technical experience in the applicable discipline instruction OR10+ years of related industry experience in the appliable discipline instructionPREFERRED QUALIFICATIONS SR INSTRUCTORAS/AA in science/engineering or equivalent experience7+ years of nuclear power plant technical experience in the applicable discipline instructionOR10+years of related industry experience in the applicable discipline instruction5+ years nuclear training experience

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Electromechanical Maintenance Technician candidates to join our team in Flemington, NJ!Shift Options: 1st, 2nd or 3rd Shift (see under “Your Skills & Expertise”)At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs an Electromechanical Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Troubleshooting, maintaining, and repairing mechanical and electrical equipment such as: AC/DC drives and motors, PLC’s, HMI’s, VFD’s, robotics, process controllers, stepper & servo motors, fire protection equipment, hydraulic and pneumatic devices, and plant support equipment.Installing, modifying, and upgrading electrical, electronic, mechanical, and computer equipmentSupporting the engineering, production, and maintenance of production, converting, assembly and packaging equipment.Troubleshooting, installing, and start-up of new equipment.Focusing on Continuous Improvement projects to drive improvements in OEE.Completing other duties as assigned or necessaryPossessing the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Associate degree or higher AND a minimum of two (2) years of industrial maintenance experienceOR High school diploma/GED AND a minimum of four (4) years of industrial maintenance experienceANDIn addition to the above requirements, the following are also required:Prior troubleshooting and repair experience with pneumatic, hydraulic, and electrical systems in an industrial environment.Ability to work one or more of the following shifts:1st Shift: M-F; 7am - 3pm2nd Shift: M-F; 3pm - 11pm3rd Shift: M-F; 11pm - 7amAbility to work weekends, overtime, or holidays as neededAdditional qualifications that could help you succeed even further in this role include:Two (2) year technical degree/diploma in a multi-craft technology program.Bachelor’s degree or higher in mechatronics, industrial electronics, robotics and automation, or engineering technologyAdvanced troubleshooting and repair experience working with pneumatic, hydraulic, and electrical systems in an industrial environment.Experience with reliability analysis, predictive (PdM), and preventative maintenance (PM)Demonstrated proficiency working with electro-mechanical equipment such as pumps, AC/DC motors, motor drives, PLC troubleshooting, etc.Experience with Automation Controls, Robotics and Industrial LasersExcellent technical communication skills, both written and oral to a diverse audience.Ability to read and understand mechanical and electrical drawingsDemonstrated strong problem-solving and computer skills.Possess excellent documentation skillsWork location: Onsite - 500 US Highway 202, Flemington, NJ 08822Travel: No TravelRelocation Assistance: Not AuthorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.The starting rate of pay for this position is $38.04/hour, with the potential to reach $46.63/hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:Pay: $50,000 - $200,000 / Yr *(Based on Experience!)The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.#ABTNORTHBenefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Aspire Bakeries is a North American baking company with a leadership position in specialty frozen baked goods. Formed from leading bakery companies, its innovative food portfolio includes breads, artisan breads, buns, cookies, donuts, muffins and pastries from beloved brands like La Brea Bakery®, Otis Spunkmeyer®, and Oakrun Farm Bakery®. With 13 bakeries in North America, we are committed to driving innovation, predicting upcoming consumer trends and flavors, and exceeding our customers’ expectations. Aspire Bakeries champions the values of Integrity, Ownership, Customer Focus, Creativity and Care to help us deliver on People Safety, Food Safety, Quality and Collaboration.Supervises maintenance technicians, performs maintenance activities, schedules employees and coordinates activities to keep bakery running in 24/7 environment. Supervises and assists in repairs, breakdowns, alignment, troubleshooting and operations of building and plant equipment. Initiates preventative maintenance action, schedules and supervises preventative maintenance activities.Responsibilities: Supervise and provide lead technical knowledge in repair of breakdowns and troubleshooting.Prepare technician schedule for 24 hour / 7 day operation line coverage and preventative maintenance activities, and recommend overtime allocation as necessary.Collaborate with Maintenance Manager to document plant needs for fiscal year, including cost value of equipment repair or replacement.Maintain repair schedules on equipment.Manage department performance measures, including visual controls and provide regular progress reports to managerPerform other duties as assigned or required.Qualifications:A high school diploma or GED is preferred. Bachelor’s degree in mechanical/electrical or chemical engineering is preferred.7 years of experience in a manufacturing environment including leadership experience preferred.Programmable Logic Controls (PLC) electrical troubleshooting knowledge.Experience with ammonia and the PSM Standard preferred.Maintenance/Engineering expertise in hydraulics, mechanics, process and electrical functions of equipment.Computer literate with proficiency in Excel and Word for spreadsheets and reports.Shift: 2ndAspire Bakeries is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

MAINTENANCE TECHNICIAN Reading, PA, USAReq #6786 Monday, September 11, 2023 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Pay and BenefitsPay Range from $25.41/hr - $38.33/hr based on skills and experience.Excellent Benefits Package including Health, Dental, Vision, and 401K Plan.1.5 pay over 40 hours.Uniforms provided.Up to 100 paid training hours annually for technicians to advance through the progressive skill levels.Stipend for safety shoes and safety glasses.RESPONSIBILITIES:Perform a variety of maintenance tasks to diagnose, repair, rebuild, replace mechanical, electrical, PLC, hydraulic and pneumatic systems on all plant equipment and facilities. Use maintenance knowledge to increase productivity, decrease downtime and waste.Work with a sense of urgency to respond to machine downtime events.Will be required to complete in-house training programs to develop equipment specific maintenance skills.The position may also require attendance at external training that may require occasional overnight travel. Must be able to follow all safety and company policies that include lock-out tag-out procedures. BASIC QUALIFICATIONS:At least 1 year of experience successfully troubleshooting and repairing industrial manufacturing equipment.Must have knowledge and experience with repairing and maintaining mechanical, electrical, hydraulic, pneumatic, PLC systems and industrial equipment. Be passionate about maintaining a safe and clean work environment. Ability to work any shift, overtime, and weekends as needed.Must have own basic tools (PCA will provide specialized tools).Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Technical degree and/or comparable experiencein successfully troubleshooting and repairing industrial machinery and equipment; particularly within the corrugated or packaging industry. KNOWLEDGE, SKILLS & ABILITIES: Excellent communication skills.Basic computer skills. Ability to work in a fast-paced environment. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyJob Start DateMonday, September 11, 2023

ESSENTIAL DUTIES & RESPONSIBILITIES:• Abide by all Safety regulations and policies• Must wear all required PPE for any task/job currently being performed• Meet all production standards and efficiencies focusing on Safety, Quality, Delivery, and Cost based on current routings/times• Perform daily housekeeping task. Help maintain 5S standards in your work location and whole department• Must be willing to work outside of your current Job Classification and Department as qualified and needed• Must complete First Piece Inspection protocol and related paperwork• Read blueprints to determine components that must be welded, and number of welds needed• Assemble and weld various components to meet appropriate quality and production standards• Sand and grind welds as needed to meet appropriate quality and production standards• Self-sufficient on start-up and shutdown equipment procedures• Select appropriate weld setting to obtain a quality weld• Operate all necessary equipment to assemble and weld components• Perform quality checks of parts as needed including effective use of calipers, micrometers, and functional gauges• Must be able to perform quality welds to steel and/or aluminum components and meet all code requirements on welds• Work with other employees to complete assemblies on multiple person operations• Check welds for strength• Check and inspect all parts• Move finished assemblies to appropriate areaJOB QUALIFICATIONS:• High School diploma or equivalent• Basic mechanical abilities• Basic mathematical abilities (addition, subtraction, multiplication, and division)• Organizational and communication skills• Desire to learn new skills and improve knowledge• Strong orientation toward:o Safety, quality, and continuous improvement demonstrated by a work history of safe performance, accuracy and attention to detail in the work performed, constructive problem solving and suggestions for improvement, ability to effectively implement or respond to change, punctuality and consistent work attendance• Understanding and support of Company policies and procedures, including those related to Safety• Must be able to attain MIG welding certification, current certification desired but not required• Able to accurately read blueprints• Able to identify all components needed to complete assembliesPHYSICAL DEMANDS AND WORK ENVIRONMENT• Will be working in a manufacturing plant with varying climate• Must be able and willing to work daily and weekly overtime as required• Able to stand continuously for 8 to 10 hours daily• Able to lift, push and/or pull up to 33lbs individually and up to 66lbs as a team• Able to grasp continuously• Able to frequently walk, reach, push and pull• SPECIAL CONSIDERATIONS: N/AWe Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

AutoReqId: 21073BR Pay Class: Salaried Exempt Minimum Pay Rate: $82,660.00 Maximum Pay Rate: $113,657.50 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: WE GIVE DOWN-TO-EARTH A WHOLE NEW MEANING Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. We might be a big company, but we appreciate and encourage our people to share their ideas and help shape our future. We want every one of our people to play an active role in growing our business. With our diverse product lines and locations across North America, there are opportunities to explore different roles and work on a variety of exciting and interesting projects. We’re a tight knit team. While we strive to be the best, we do it with an attitude that is humble, accessible and down-to-earth. We don’t ask you to “fit in” to our culture. We invite you to add to it. HERE’S WHAT YOU’LL GET TO DO Do you want to lead a dedicated and committed Mechanical Maintenance Staff Heidelberg Materials is seeking a Sr. Maintenance Supervisor who takes a detailed and organized approach to preventative and corrective maintenance tasks that impact our everyday cement operations. This position reports directly to the Maintenance Manager and will be a great fit for a candidate who likes a heavy industrial work environment. Contribute to the achievement of production, quality, environment, reliability and utilization targets.Ensure strict compliance of maintenance operations with the Maintenance Model: follow-up inspection routes compliance, validate work requests (notifications) coming from field, ensure good level of planning for work orders, coordinate work orders scheduling with production and ensure good quality and safety of execution.Develop a condition based preventive maintenance culture on a day-to-day basis, finding solutions to reduce reactive maintenance (promotes cross functional Root Cause Analysis of incidents and drives implementation of solutions) as per HM maintenance approach documented in the HM Maintenance HandbookCooperate with Purchasing Department and is responsible for technical evaluation offers for spare parts.Follow-up and optimize Maintenance Department expenses according to Operating PlanEnsure adoption and adherence to standards, norms and best practices.Ensure the management of individual performance.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. This position will be based at Nazareth, PA. HERE’S WHAT WE’RE LOOKING FOR Bachelor's degree in Mechanical Engineering with hands on experience strongly preferred OR on the job experience to offset a degree.Minimum of 5 years of maintenance experience in heavy manufacturing, cement plant experience preferred.Prior experience managing staff.Experience in SAP and Microsoft OfficeDemonstrated ability to lead, manage and motivate others Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment BRING YOUR HUMBLE OVERACHIEVER ATTITUDE AND LET’S ELEVATE OUR COMPANY EVEN HIGHER! At Heidelberg Materials, we care a great deal about your health which is why there is no waiting period to participate in highly competitive medical, dental, vision, and life insurance programs. In addition, we offer a 401(k)-retirement savings plan with an automatic company contribution as well as matching contributions. External candidates must be able to work in the USA without sponsorship. Equal Opportunity Employer - Minority / Female / Veteran / Disabled Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Hey detail-oriented person! We handle product movement at retail. We display it, we move it, we track it; making sure stores and their product suppliers have the best opportunities for optimal sales. When you join the SAS Retail Services’ team as a Reset Merchandiser you’ll be making a difference by ensuring the latest products match the new plan. If you like the flexibility of independent work and love looking at your “job well done” each day, this may be for you. We’ve got a lot to offer with specialized training and growth opportunities galore.What you get:Competitive wage; $16.00 per hourGet paid quicker with early access to earned wagesGrowth opportunities abound – We promote from within. Simple. Excel and advance.We offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and online discounts.Now, about you:You’re 18 years or olderWith reliable transportation and valid driver’s licenseYou like physical work of moving, bending, standing and can lift up to 25lbsClick here to learn more from our team.Join us and see what’s possible for you! Click here to get started.

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay from $21.90-34.85/HRMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: Project/Business Responsibilities: Maintain all company fleet vehicles for routine and preventative maintenance and repairs.Maintain records for all company fleet vehicles, including licenses, inspections, and insurance cards.Maintain records of all service and repairs to all company fleet vehicles.Manage a small inventory of essential parts and supplies for performing routine service and repairs.Source and procure all needed items from established vendors seeking the best price and quality. All items are to be bought with purchase orders. Submit all packing lists and documents to accounting for proper payment and tracking.Identifies mechanical problems either visually or with computer diagnostic equipment.Fill out a shop work order for all vehicles worked on every day. Have sufficient information on each work order to ensure accurate billing and inventory movement.Plans and establishes timetable to complete repairs and maintenance. Close work orders promptly.Make minor repairs on motorized shop equipment such as lifts, tow motors, etc., as requested.Drive a company vehicle, when required, in a safe manner. Qualifications: Project/Business Management:Ability to problem solve and troubleshoot.Good mechanical skills.Effective communication skills and the ability to schedule appointments with co-workers.Ability to read service and repair manuals.Proficient with computer diagnostic equipment and software.Maintain and clean garage equipment and tools to ensure they are always kept in a safe and usable condition.Ability to take direction from Supervisor and or management.Safe driving record.High school diploma or GED, course work at an accredited vocational, technical or trade school.Minimum of 5 years of experience or an equivalent combination of experience and trade school trainingA valid Pennsylvania inspection and emissions licenseAbility to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use typical business tools, including E-Mail, Word, Excel, etc. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Req ID:449135Address: 3700 Mountain Road Hamburg, PA, 19526Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

360 NJ-31, Washington, NJ 07882Automotive Service Technician All Levels Wanted – Sign-On & Relocation Bonus for Qualified Candidates!Competitive Hourly Pay + Top-Tier Benefits!Accelerate Your Career at Rossi Auto Group!Ready to kick your career into high gear Rossi Auto Group is calling all skilled Service Technicians who are passionate, detail-oriented, and ready to join a dealership with over 40 years of community excellence! We’re seeking top talent for both our GM and Chrysler Dodge Jeep Ram locations, where you’ll work in a team-oriented, high-energy environment that values and rewards your expertise. If you’re looking for a place where your career can truly shine, let’s get started!Why Rossi Auto Group Outstanding Hourly Pay– Recognizing your skills and dedicationSign-On & Relocation Bonuses– Move with ease, grow with usFull Benefits Package– Including Medical, Dental, and Life insurance401(k) Retirement Plan– Invest in a rewarding future with RossiPaid Time Off– Enjoy paid vacations and holidaysState-of-the-Art Facilities– Work with cutting-edge tools in a modern, professional environmentContinuous Learning– Keep up with industry innovations through ongoing trainingYour Role with Us:Diagnose & Repair:Identify issues quickly and perform precise repairs that meet both dealership and manufacturer standards.Multi-Skill Mastery:Work on engines, transmissions, electrical systems, suspensions, braking, AC systems, and more!Stay Ahead:Participate in regular training to keep up with the latest automotive advancements.Maintain a High Standard:Keep our shop organized, efficient, and in tip-top shape!What We’re Looking For:Experienced Technicians– Prior dealership experience requiredProficiency with Tech & Tools– Knowledge of the latest diagnostic and shop equipmentProblem-Solving Expert– Strong work ethic and diagnostic skillsCustomer Focused– Committed to delivering high-quality serviceTeam Player– A positive, can-do attitude with a commitment to excellenceIf you’re ready to join a dealership that’s dedicated to your growth, apply today! Upload your resume and complete our online assessment for immediate consideration. Start your journey with Rossi Auto Group – where every day is an opportunity to excel!Rossi Auto Group is proud to be an Equal Opportunity Employer.

Performs preventative maintenance, repairs and installs materials to ensure proper operation and upkeep of facilities, general electric and plumbing systems.1. Performs regularly scheduled preventative maintenance on electrical and plumbing systems within facility to ensure proper upkeep of equipment.2. Performs general carpentry, painting, electrical, welding, plumbing and HVAC installations as required.3. Installs and repairs DC storage racks as required.4. Assists with mechanical and electrical maintenance and repair of a variety of powered material handling equipment as required.5. Maintains and completes various maintenance-related documents including but not limited to work order requests, preventative maintenance and daily job breakdown summaries, parts requests and parts purchase orders.6. Performs semi-routine duties where some judgment is required. Work is performed under defined and uniform procedures.7. Exhibits reasonable care and operation of powered material handling equipment.8. Maintains the integrity of our Mission, Vision and Values statement while performing daily job duties.Qualification1. One to two years maintenance related experience is required.2. Strong mechanical, carpentry, plumbing and A.C. electrical circuitry knowledge of 120V through 440, 3-phase required.3. Excellent hand and eye coordination required.4. Ability to interpret blueprints, schematics, utilize basic hand tools and electrical and/or electronic test equipment including volt/ohm meters and amp probes strongly preferred.5. Ability to handle multiple tasks, be detail oriented, meet department standards and perform duties without immediate and constant supervision.6. Ability to perform physical activity at a sustained pace within the Distribution Center environment including walking, bending and lifting is required.We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.This Nuclear Electrical Maintenance Training Instructor can sit in either Exton, PA, Coatesville, Pennsylvania or Wilmington, IL They can be filled at Mid-level or Senior level.Please see requirements below.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range:Mid-level or Job title $98,100 - $109,000Senior-level or Job title $113,000 - $122,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K. PRIMARY PURPOSE OF POSITIONDemonstrates mastery of skills and extensive subject matter knowledge in carrying out assignments associated with the analysis, design, development, implementation, evaluation, and modification of plant specific nuclear maintenance and technical training programs.PRIMARY DUTIES AND ACCOUNTABILITIESDrives station and personnel performance improvement through the use of training. Coordinates, and conducts performance-based maintenance and technical training programs as required by user community in accordance with Constellation's TSD model, department procedures, and with proper application of the analysis, design, development, implementation, and evaluation phases.Assures the training programs are maintained current and incorporate information gained from INPO Significant Operating Experience Reports and Constellation NERs, NRC Circulars, Bulletins, and Information Notices, plant design change and backfit information, plant procedure changes and revisions, new regulations, and training effectiveness reports.Prepares trainee examination and conducts trainee evaluations for classroom, laboratory, OJT, and simulator environments, as appropriate and conducts counseling sessions for trainees, evaluates the results, and recommends/develops individualized training programs.Support station and fleet in the areas of business initiatives, project management, refuel outage support, EP duties, and special projects.Participates in NRC, INPO and management audits, and prepares responses to audit findings.Maintains knowledge of plant operations, disciplinary skills and techniques, commensurate with the responsibility to develop and conduct effective, high-quality training.Supervises the collection and maintenance of auditable training records and reports required to document training program activities.MINIMUM QUALIFICATIONS MID-LEVEL Electrical Maintenance InstructorHigh School diploma3+years previous technical or craft nuclear experience OR5+ years of related industry experienceEffective written and oral communication skillsMINIMUM QUALIFICATIONS SR Electrical Maintenance InstructorHigh school diploma5+years of nuclear technical background OR7+ years of related industry experience2+ years in training/educationEffective written and oral communication skills PREFERRED QUALIFICATIONS Mid-level Electrical Maintenance InstructorAS/AA in science/engineering5+ years of nuclear power plant technical experience in the applicable discipline instruction OR10+ years of related industry experience in the appliable discipline instructionPREFERRED QUALIFICATIONS Senior Electrical Maintenance InstructorAS/AA in science/engineering or equivalent experience7+ years of nuclear power plant technical experience in the applicable discipline instructionOR10+years of related industry experience in the applicable discipline instruction5+ years nuclear training experience

Aspire Bakeries is a North American baking company with a leadership position in specialty frozen baked goods. Formed from leading bakery companies, its innovative food portfolio includes breads, artisan breads, buns, cookies, donuts, muffins and pastries from beloved brands like La Brea Bakery®, Otis Spunkmeyer®, and Oakrun Farm Bakery®. With 13 bakeries in North America, we are committed to driving innovation, predicting upcoming consumer trends and flavors, and exceeding our customers’ expectations. Aspire Bakeries champions the values of Integrity, Ownership, Customer Focus, Creativity and Care to help us deliver on People Safety, Food Safety, Quality and Collaboration.The PLC Maintenance Technician is responsible for maintaining, troubleshooting, and repairing all manufacturing equipment including wrappers, mixers, motors, conveyors, and refrigeration systems. They install, program, and repair automated machinery and equipment such as robots and PLCs, as well as monitor equipment to ensure it is in excellent operating condition. The technician performs preventive and corrective maintenance, repairs faulty equipment, installs new equipment, and maintains documentation on electrical and control systems.Responsibilities:Maintains troubleshoots, and repairs all manufacturing equipment such as wrappers, mixers, motors, conveyors, refrigeration systems.Installs control and distribution apparatus such as switches, relays, and circuit-breakers panels.Connects power cables to equipment, such as electric range or motor, and installs grounding leads.Monitors and ensures that the equipment is in excellent condition for operation.Performs preventive and corrective maintenance on the equipment.Repairs faulty equipment or systems.Installs powers on the new manufacturing equipment.Visually inspects and tests machinery and equipment.Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine.Dismantles defective machines and equipment and installs new or repaired parts.Cleans and lubricates shafts, bearings, gears, and other parts of machinery.Installs, modifies and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, SOVs, pressure regulators, and related equipment.Repairs and maintains physical structure of facility.Installs, programs, or repairs automated machinery and equipment such as robots and PLCs.Maintain current documentation of all electrical and controls systems including device hardware and software.Assist Mechanics in troubleshooting and repair of electrical or controls related failures.Train and coordinate activities of Mechanics on all shifts as necessary.Work from offsite locations occasionally to assist with equipment troubleshooting and repair.Maintain production equipment while running on a product production schedule. Perform electrical and mechanical inspection safely while equipment is in production.During equipment down days the PLC Technician will coordinate work on the production lines taking care of any corrective, preventive or scheduled repairs in accordance with the company and/or machine vender specification.In the event of an equipment breakdown the PLC Technician will oversee the Mechanical Technician to determine the cause of the trouble, repair and return the equipment back into production in the shortest time period.Complete assigned tasks in accordance with government codes and regulations, GMP, safety, quality control, company programs and procedures.Primarily performs preventive, scheduled or corrective repairs on batching and continuous process control systems, their networks, AC/DC and servo drives, pneumatics, hydraulics and mechanical components.Maintain plant secondary systems for the supply of steam, hot and chilled water, pneumatic air, electrical power, refrigeration, HVAC and emissions control (oxidation).Maintain work records in accordance with work orders, backlog and job assignment system.May travel to various locations to purchase parts, attend training or for other duties.Works to maintain and improve on the quality, legality and safety of each product and the processes used in their manufacture. Responsible for keeping assigned work area clean and tidy at all times and reporting any potential contamination and suspicious activity to a Supervisor immediately.Any other duties as assigned.QualificationsA high school diploma or GED is requried. Associates degree or certificate in electrical, mechanical or industrial automation engineering or related degree(s) preferred.Minimum of 5 years’ experience maintaining manufacturing systems and equipment in an automated plant is required.A background in full machine and electrical control system design, installation and commissioning.Rockwell PLC and Drives certification is highly desirable.RS Logix and Factory Talk View programmingKnowledge of ammonia refrigeration systems is highly desirable.Food plant experience preferred.Must have strong mechanical background in a production setting troubleshooting and repairing gearboxes, conveyors, sprocket/chains, belts, clutches, and brakes.Must be able to troubleshoot and repair electrical systems up to 480v 3 phase, read and interpret electrical drawings and P&IDs.Knowledgeable in use of all power tools, hand tools, welders, lathes, drill presses, etc.Must be able to work any shift including weekends and holidays.Shift: 2nd#LI25Aspire Bakeries is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

ESSENTIAL DUTIES & RESPONSIBILITIES:• Abide by all Safety regulations and policies• Must wear all required PPE for any task/job currently being performed• Meet all production standards and efficiencies focusing on Safety, Quality, Delivery, and Cost based on current routings/times• Perform daily housekeeping task. Help maintain 5S standards in your work location and whole department• Must be willing to work outside of your current Job Classification and Department as qualified and needed• Must complete First Piece Inspection protocol and related paperwork• Plan, lay out and perform all bench and machine operations to construct, alter and repair intricately designed and constructed tools, dies, fixtures, gauges, machine attachments and mechanisms• Work from complicated drawings and specifications and use a wide variety of precision instruments for exact measurements• Work from drawings, handbooks, catalogs and other informational sources to obtain data necessary for selecting machine components• Perform set up of new and repaired dies, and for more complex dies requiring development work and skill to set• Routine upkeep of dies and tools required for production equipment• Troubleshoot and repair quality and throughput concerns associated with production equipment.JOB QUALIFICATIONS:• High School diploma or equivalent• Basic mechanical abilities• Basic mathematical abilities (addition, subtraction, multiplication, and division)• Organizational and communication skills including ability to read, write and understand written and verbal instructions.• Desire to learn new skills and improve knowledge• Strong orientation toward:o Safety, quality, and continuous improvement demonstrated by a work history of safe performance, accuracy and attention to detail in the work performed, constructive problem solving and suggestions for improvement, ability to effectively implement or respond to change, punctuality and consistent work attendance• Understanding and support of Company policies and procedures, including those related to Safety• At least 3 years previous experience as a manual machinist• Must be able to read blueprints• Must be able to work independently with minimal supervision.• Must know principles and have general understanding of common welding practices and equipment.• Must be able to use various measurement tools not limited to tapes, micrometers, calipers (all types) and protractors.• Must be able to understand and set up the following equipment: Drill Press, Cut off Saw, Band Saw, Lathe, Grinder, Milling Machine.• Knowledge of stamping press and spot-welding equipment needed.• Understand the differences between various common manufacturing materials and have knowledge of the processes available to transform these materials into finished products.• Ability to identify and solve problems associated with manufacturing processes• Demonstrated ability to effectively implement or respond to change.• Able to read, write and understand written and verbal instructions.This position does not require an official journeyman or apprentice qualification. PHYSICAL DEMANDS AND WORK ENVIRONMENTPOSITION SUMMARYAs operational needs change, duties and responsibilities of this position will be subject to change and/or develop per management review.• Will be working in a manufacturing plant with varying climate• Must be able and willing to work daily and weekly overtime as required• Able to stand continuously for 8 to 10 hours daily• Able to lift, push and/or pull up to 33lbs individually and up to 66lbs as a team• Able to reach overhead• Able to stoop, kneel, squat• Able to use hands for fine manipulations• Able to handle frequent pushing and pullingSPECIAL CONSIDERATIONS:Safety Sensitive Position – See HR With QuestionsWe Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

AutoReqId: 20762BR Pay Class: Salaried Exempt Minimum Pay Rate: $73,460.00 Maximum Pay Rate: $101,007.50 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: MILITARY VETERANS - HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials, we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. This position is based in Nazareth, PA and reports directly to the Senior Maintenance Supervisor. HERE’S WHAT YOU’LL GET TO DO: Schedules and supervises the maintenance group to maintain equipment to meet production requirements.Oversees the work performed by maintenance crews and outside contractors as required for each job to ensure completion in a timely and quality manner.Manages any urgent or breakdown jobs as required to keep equipment running and minimize downtime.Provides development of direct reports and motivates staff resulting in a reliable and competent work force. Provides technical assistance to maintenance personnel toward expedient problem resolution.Execution of these specific duties will be achieved through the following:Coordinates with the Maintenance Dept. by communicating anticipated jobs and provides input when stores stocks need to be increased or altered, for upcoming jobs to maintain maintenance schedules.Work with the Maintenance Dept. to develop work schedules, equipment usage schedules, priority of mechanical expenditures and procedures for equipment to meet overall plant goals.Prepare material and labor estimates to develop project cost estimates and plant budgets.Monitor the acquisition and use of materials to meet productivity and budgetary goals.Maintain time, work order, material, equipment and other mechanical shop records.Determines appropriate training for employees and by evaluating their skills, abilities, safety practices and behavior to maintain the necessary skills to perform their jobs.Plans the schedules of the staff including assigning work and overtime as required to meet maintenance needs.Participate in the implementation of plant projects. Provide input into the design and implementation of mechanical aspects of projects to ensure tasks are able to be accomplished in a quality, cost-effective, and timely manner.Ensure the application of the plant’s rules of conduct, policies, and health & safety protocols during maintenance procedures to minimize injuries and lost time incidents.Provide ongoing maintenance support to the plant for all shifts by participating in the plant’s on call program. This includes evaluating and determining the course of action for maintenance incidents after hours and on weekends while on call and may require on-site supervision of the resolution to maintain operational efficiency. Must be willing to work weekends and after hours for supervision of emergency repairs as needed.Ensure that Maintenance department tools and equipment are in good working condition and that adequate stocks of consumables are maintained to allow maintenance activities to occur as scheduled.Participate in the scheduled on-call rotation Who we are looking for: 5 years of mechanical repair and maintenance experiencePrior supervisory experience preferredPrior experience working with heavy industrial machinery and equipmentDemonstrated ability to lead others with or without direct authorityKnowledge or understanding of SAP preferredWorking knowledge and technical competency in the cement manufacturing processProficient with Microsoft OfficeEffective interpersonal and communication skillsKnowledge of MSHA regulations and guidelinesMotivation, ability, and willingness to participate in the plant on-call schedule, to troubleshoot and help address issues that arise during off-shifts and weekends External candidates must be able to work in the USA without sponsorship. Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

AutoReqId: 19218BR Pay Class: Hourly Hourly Pay Rate: $27.31 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Welder for our Downingtown facility located in Downingtown, PA . The working schedule for this position is 2nd shift. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Do you pride yourself in being a jack-of-all trades The Welder position is critical to support plant needs by ensuring a safe and productive work environment. This position requires welding certification. Primary duties include performing the layout of work and all types of welding on stationary and mobile equipment. May also assist in maintenance work or other work as assigned. Perform layout workAll types of weldingWork on large equipment and mobile equipmentAssist in maintenance workEnsures compliance with all health, safety, and environmental regulations, and with company policies and proceduresMust pass certification for 3G,4G What We Are Looking For High school diploma or GED requiredMinimum 2 years welding experienceMust pass welding certificationAble to use oxygen/acetylene torchesHorizontal and Vertical and Overhead weldingAir ArcingMust be able to lift at least 50 poundsAbility to work on large equipmentAbility to work in small spaces.Ability to work different extended hours, holidays and/or overtime requiredPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

AutoReqId: 20967BR Pay Class: Hourly Hourly Pay Rate: 26.44 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials is seeking a Plant Maintenance Mechanic for our Penns Park facility located in Newtown, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specificationFuel all mobile fleet regularly and maintain adequate records What We Are Looking For High School Diploma or equivalent requiredPrevious experience in open pit mining operations and aggregate products a plusMSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (at the waist, above the waist, below the waist), kneeling, reaching, grasping, (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates (ie. weather, extreme temperatures), tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

AutoReqId: 19971BR Pay Class: Hourly Hourly Pay Rate: 29.25 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: MILITARY VETERANS HEIDELBERG MATERIALS WANTS YOU! Here at Heidelberg Materials we recognize how military experience can successfully translate into the civilian workforce and we are committed to giving veterans opportunities. Heidelberg Materials is seeking a Plant Maintenance Night shift person for our Downingtown facility located in Downingtown, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams,, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For High School Diploma or equivalent requiredMaintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an excess of 40 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Ability to use a variety of hand tools, power tools, shop machines, hoists, etcPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipmentWeld and torch certification a plusMSHA Part 48 Training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled