ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Location - New Freedom, PA Schedule: Onsite 40 hours January - May (Spring Semester) As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What’s in it for you Competitive hourly rate of $21-$24Comprehensive benefits package including 401k, Medical, Dental and Vision care – Available day oneInclusive and diverse in-office environment and opportunity to work in one of the industry’s largest and most capable engineering test labs. Click this link to learn more about our JADEC facility!Potential to earn class creditWhat you will doAs a member of the Johnson Controls Mechanical Engineering Co-Op/Intern will be responsible for various engineering activities within the compressor engineering department. Reporting to the engineering manager, interfaces directly with compressor engineers, aero engineers, technicians, test lab, and other departments within the company as needed.Role will primarily be focused on large centrifugal compressors for York brand water cooled chillers.How you will do it:The intern will follow compressor testing, organize and analyze test data, and create reportsTake direction from manager and engineers, provide guidance to test operators and interface with compressor technicians. Understand and follow all relative safety procedures and utilize appropriate personal protective equipmentCreate and execute test plansEdit and maintain work guidelines and instructions for future interns to followAssist in various assigned projects within the compressor engineering function as necessaryAt the conclusion of the internship, a brief presentation to the compressor engineering department summarizing your activities and key learnings will be requiredMust be able to work 40 hours a week at our JADEC office in New Freedom, PAWhat we look forRequired Qualifications:Currently enrolled at an accredited U.S. college or universityPursuing a degree in Mechanical Engineering, Mechanical Engineering Technology, or Electro-Mechanical EngineeringDemonstrated knowledge in the area of Mechanical EngineeringHands-on mechanical aptitude desirableFamiliarity with machine designSolid knowledge of thermodynamicsU.S. citizen or legal right to work in the U.S.Preferred Qualifications:Possess strong problem solving skills and be detail orientedExcellent communication and organizational skillsAbility to work within a team environmentFlexibility to work on multiple projects and coordinate prioritiesProficient with Microsoft Office products including Word, Excel, PowerPoint and Outlook

Your Job Posting Senior Product Design Engineer |Utilimaster |Landisville, PA Regular Employee |Salary Exempt Who we are At The Shyft Group, we are driven to deliver, and as the North American leader in specialty vehicles, our portfolio of last-mile delivery vehicles, work trucks, and motorhome chassis brings people, goods, and services where they need to be. We are strengthened by nine industry-leading brands -- Utilimaster, Blue ArcEV Solutions,Royal® Truck Body,DuraMag, Magnum,Strobes-R-Us,Spartan® RV Chassis, Red Diamond,Builtmore, and Independent Truck Fitters. Over 4,000 employees across ten states and two countries work independently and together as one team under Shyft, building chassis, vehicle bodies, and accessories that improve every route, every run, and every ride. Empowered by a supportive, inclusive, and highly entrepreneurial culture, every person behind our brands is given the tools they need to make a positive contribution to the company, their community, and their families. Together under the Shyft umbrella, our teams drive new synergies that bring innovations to life on the road for an experience that is safer, more satisfying, more rewarding all around. With 50 years and millions of miles behind us, we continue to charge forward leading the commercial vehicle transition to electric, innovating across all our brands, and earning our position among Fortune’s 100 Fastest Growing Companies. What you’ll doAs the Senior Product Design Engineer for Utilimaster (A Shyft Brand) based at our facility in Landisville, PA, you will be at the forefront of driving the design, development, and validation of vehicle design features for our Utilimaster division. Your role will be critical for improving the quality and durability of Utilimaster vehicles.You will also be accountable for driving new product improvement and new development projects, maintaining legacy products, and overseeing the conceptual design of new components and sub-systems, staying within the limits of our manufacturing equipment and assembly capabilities.You will also:Drive new product improvement and development projects and maintain legacy productsOversee the conceptual design of new components and sub-systemsDesign engineering solutions that are accurate, timely, and cost-effectiveEnsure your design solutions meet customer expectations, perform over the warranty period, and comply with regulatory requirementsExamine new designs using CAD layouts, stack-ups, and analytical tools to solve engineering problemsGenerate DFMEAs for components and sub-assemblies and design validation plans and reportsEmploy Lean and Six Sigma techniques to achieve simplification and commonizationCarry out test plans to fully validate components and systemsDraft and communicate engineering reports for the validation processPrepare presentations and communicate plans and results to suppliers and customersMaintain quality standards and follow proper inspection proceduresApply problem-solving techniques and methodologies to manufacturing and assembly problemsEvaluate engineering solutions and develop an understanding of unintended consequences Launch revisions to drawings, solid models, and bills of materialUtilize Aurora software to research specifications, structure, and parts compatibilityLearn more about The Shyft Group, Utilimaster, and Landisville, PA within the Learn More section below.RequirementsBachelor’s degree in Mechanical Engineering or related Engineering disciplineFour or more (4+) years of product design engineering solutions expertiseA reputation for solving problems analyticallyAwareness of cost drivers related to a range of materials, design features, and manufacturing processesWorking knowledge of SolidWorks 3D CADVersed in reviewing and modifying assemblies, models, and detail drawingsExpertise in engineering statics, dynamics, structural mechanics, thermodynamics, and fluid dynamicsProficient in Microsoft Office, particularly Word, Excel, PowerPoint, Teams, and OutlookA track record of prioritizing effectively and executing multiple concurrent assignments Proficient with program management and time management toolsWhat Makes You Stand OutEight or more (8+) years of product design engineering solutions expertiseUnderstanding of the extrusion process, metal fabrication, forming, tolerances, and capabilitiesProduct Design experience within the on-highway, heavy truck, specialty, or automotive vehicles sectorsA solid grasp of FMEA, FEA, CFD, lean manufacturing, and design for Six Sigma (DFSS)Learn MoreThe content below is exclusively available on our careers site job description:https://theshyftgroup.csod.com/ux/ats/careersite/4/home/requisition/740 c=theshyftgroupThe Shyft GroupEmployee TestimonialsOur StorySustainabilityYouTubeLinkedInJoin Our Talent CommunityUtilimasterCompany NewsProduct PageCommercial Truck BodiesFollow Utilimaster onLinkedIn,Facebook, andYouTubeLandisville, PALandisville, PA - #1 Best Place to Buy a House in Lancaster CountyLandisville, PA – TripAdvisor 2023About Landisville, PA via BestPlaces.netAbout Landisville, PA via Niche.comLandisville, PA - Wikipedia Why The Shyft Group We believe that when our people thrive personally and professionally, our business thrives. We are committed to offering comprehensive benefits programs that stay healthy, feel secure, and maintain a work/life balance. Stay Healthy:Medical and Rx PlanHealth Savings AccountDental and Vision PlanHealthcare Flexible SpendingWellness PlanFinancial Security:401 (k) Retirement SavingsShort and Long Term DisabilityCompany Provided Life and Dependent Life InsuranceVoluntary Term Life InsuranceWork/Life Balance:Educational ReimbursementEmployee Assistance ProgramDependent Care FSA Equal Employment Opportunity (EEO) The Shyft Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, genetic information, status as a protected veteran or status as a qualified Individual with a Disability, or any other characteristic protected by applicable federal, state or local law.If you have a disability and would like to request an accommodation in order to apply, please email us at . The Shyft Group is an E-Verify Employer Shyft uses E-Verify, which is an online system operated by the U.S. Department of Homeland Security in partnership with the Social Security Administration to verify employment eligibility and validate social security numbers. Through participation in the E-Verify program, information entered on Form I-9 will be provided and compared to information available at both of these agencies. See posters for more details. E-Verify Notice U.S. Right to Work Notice.

Are you looking for an exciting opportunity to gain valuable hands-on career experience while working on meaningful strategic projects Do you want to work with skilled, experienced professionals on challenging and impactful assignments that help improve our world Johnson Controls is powered by ideas and energy. We are continuously searching for fresh innovative ideas from bright, inquiring minds. As a member of the Johnson Controls Future Leaders Internship Program, your valuable skill set, knowledge, and passion will help us continue to excel in a dynamic and competitive global environment. This program is a unique opportunity to put classroom theory into practice while bolstering your resume and professional network. By joining a program that is rooted in community, connection, and memorable experiences, you will have an opportunity to transform your future. #NextGenJCI #internshipWhat you will doThe hardware engineer intern supports the design and test of electronic Printed Circuit Board (PCBs) assemblies and the development of intelligent embedded control system of Variable Speed Drives (VSD) using MCU, FPGA and tools like MATLAB/SIMULINK.How you will do it:Support system modeling, system simulation and verification using MATLAB/Simulink with Auto-code generation.Emerge control code into existing firmware.Conduct performance testing of power electronics control using Hardware-In-Loop (HIL) system.Provide support to the lead electrical engineers in tasks such as VSD dyno testing and chiller testing.Perform routine tasks under close supervision using well-defined standards and procedures.Support the development and documentation of standard procedures, design standardization, and engineering change notices.Use predetermined methods, sequences, and setups to perform job duties.Other duties as assigned.What we look forRequiredQualifications:Full-time student enrolled in a four-year college or university; currently enrolled in at least junior year within an engineering curriculum. Graduate students with VSD control background is preferred.Maintain a minimum of a 3.0 out of 4.0 overall grade point average.Broad technical background in areas of electrical engineering, VSD control system development.Strong analytical, conceptual and organizational skills.Proficient in MS Office applications.Ability to work and thrive in a team environment.Strong verbal and written communication skills are required.Ability to self-motivate and work productively without supervision.Authorized to work in the U.S. full-time and without restriction during your internship at company location.

Are you looking for an exciting opportunity to gain valuable hands-on career experience while working on meaningful projects Do you want to work with skilled, experienced professionals on challenging and impactful assignments that help improve our world Johnson Controls is powered by ideas and energy. We are continuously searching for fresh innovative ideas from bright, inquiring minds. In this role, your valuable skill set, knowledge and passion will help us continue to excel in a dynamic and competitive global environment. This internship opportunity is a chance to put classroom theory into practice while bolstering your resume and professional network. What you will do Johnson Controls invites you to apply for an internship located in New Freedom, PA. This internship is designed to provide you with a positive work/training experience and challenging objectives. This engineering intern has responsibility to support design, testing, and data analysis activities for tasks related to new both product sustaining and development. Specific identified internship responsibilities are outlined below. How you will do it · Full-time fall/winter 2024/2025 internship. Tasks require in-person time in the office and in the test lab. · Contribute to assigned tasks providing regular updates and status reports. · Connect with assigned team members through regular 1 on 1 individual meetings as well as participation in team meetings. · Provide and evaluate proposals for product design improvements. · Communicate instruction to test operators and provide technical support to solve problems found during testing. · Analyze test data to evaluate system and subcomponent performance relative to test goals. · Generate technical documentation to organize design rules and test procedures for use within the company. What we look for Required Qualifications: · Currently enrolled as a full-time student at an accredited U.S. college or university. · Minimum of 2 years complete toward an engineering or other technical degree. · U.S. citizen or legal right to work in the U.S. Preferred Qualifications: · Demonstrates an ability to learn quickly and independently. · Professional communication skills including the ability to explain technical concepts with words and graphics. · Organizational skills utilizing web-based collaboration tools such as Microsoft Teams with shared files and folders. · Experience with Microsoft Excel or equivalent data analysis tools. Programming experience is a plus. · Interest in learning fluid and thermal principles and how they are applied in commercial equipment. · Demonstrated problem-solving skills required. Teamwork and the ability to work with many teams is critical in our global product group environment. Each of these virtues must be consistently displayed with a focus on continual improvement of our team culture. • Humble – willing to sacrifice self-interests for the success of the team • Hungry – diligent, self-motivated, and always for looking for new opportunities to contribute • Smart – able to read and interpret people and situations

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offer:Competitive salaryandbonus planWe offer incentive programs for turning in referral leads and quoting planned service agreements or L&M.Paidvacation/holidays/sicktimeComprehensive benefits package including 401K, medical, dental, and vision care–Available day oneOn the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!:https://youtu.be/pdZMNrDJviYWhat you will do:Under general direction, responsible for the service & repair, design, configuration, and operation of complete HVAC building control systems and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the customers and JCI goals. Accountable for quality, timeliness and efficiency of Service & repair and designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants,Sales and Service team and subcontractors.How you will do it:Designs, configures and services technically complex building control systems for the customers facility. Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.Develops and tests software programs necessary to operate the system per the customer's facility requirements.Coordinates and creates necessary drawings and equipment schedules for submittals, service and/or installation.Selects, orders, and tracks the delivery of materials for assigned jobs.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.Provides field change information to the team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with sales and service operations. Performs value engineering to provide cost effective results while maintaining customer satisfaction.May provide work direction to Service Controls Technician I and Senior I and Senior II Controls Technicians.Adheres to safety standards. High degree of regard to employee and subcontractor safetyWhat we look for:RequiredMinimum of Ten (10) years of experience with programming, installing and/or commissioning controls systems including system-level controllers.Demonstrated knowledge of the construction, service mechanical, electrical, or HVAC service industry.Demonstrated knowledge and understanding of mechanical drawings, electrical wiring diagrams, control theory, automatic temperature controls, building automation systems and other building subsystems.Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., Modbus, LON, BACnet, etc.).Ability to relate technical knowledge to a non-technical audience.Demonstrated advanced computer skills required, particularly computer-related drafting tools, such as Visio.PreferredBachelor's degree in engineering, or an associate degree in a related technical field with seven years of relevant work experience required.Understanding of IP networking for building automation systems.

What you will doAs an Engineer you will work in the Air Handling Product Engineering team that is part of the Applied Equipment Group for Johnson Controls. We manufacture Air Handling equipment for Building HVAC, Data Centers and Industrial processes. This position will be in our York, PA Factory.Key elements of the Engineer’s role are to test and analyze fan performance, execute design changes, manipulate data sets to derive the optimum offering and to execute against a prioritized list of projects. The Fan Engineer is recognized as the authority, subject matter expert and expected to guide/lead business decisions.How you will do itApplies extensive use of statistical analysis and other data regression tools.Providing technical direction to engineers, drafters and technicians on specific work assignments. Will be working at times in a test Lab setting.Assists and collaborates with other departments in the design or improvement of products.Provides necessary support and interface to thoroughly resolve field and factory issues and concerns.Advances the state of the art in fan performance and application.Proficient at understanding and applying compliance to multiple standards (UL, DOE, AHRI, AMCA and others).Proficient at analyzing product design requirements and recommending solutions.What we look forRequiredBachelor’s degree in Engineering with 5 years of ExperienceExperience with software testing and multiple data base manipulationHigh level of self-motivation and integrityEffective and professional communication and organizational skills are requiredAbility to troubleshoot, collaborate and brainstorm with other team members#LI-SI1#LI-Onsite

What you will doThe Test Engineer will “manage” a test throughout the process from test design and planning through execution to completion including preliminary analysis of data results. This individual possesses a working knowledge of HVAC/R equipment and its application. This individual has experience with component or system testing, test procedure development, and mechanical fluid or airflow system design, troubleshooting or operation. They are required to singularly manage the testing process for individual test subjects in order to successfully and efficiently complete testing within the product area. They will conceive, develop, and evaluate plans for solving complex testing challenges. An advanced level team contributor with strong technical expertise in HVAC who will assist in training of personnel in the laboratory as well as defining and supporting the implementation of operational improvement of testing.How you will do it· Provide technical communications for test engineering to project customer(s).· Plan and execute tests of chillers and components. This may include:o Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.o Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.o Meet with product engineering, product management, product technical support or equivalent groups to agree upon and issue test plans.o Work within the test engineering team to schedule tests and required resources.o Provide oversight and input to test technicians for set up of data acquisition software configurations.o Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.o Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.· Drive, and participate with creation, of standard procedures, test standards and processes.· Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, or advanced testing services.What we look forBS requiredPreferred combination of two (2) years direct work experience in the following: HVAC/R equipment development, servicing or testing, with a good understanding of HVAC/R systems, concepts, and diagnostics.Desired background in engineering and development testing, with use of a variety of test instrumentation to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Works under minimal supervision. Ownership of assignments, which are carried out collaboratively within lab team and customer groups. Spear-heads process initiatives within department.Familiarity in one or more technical and operational disciplines within HVAC platform development. Experienced in environments ranging from laboratory to manufacturing/testing facilities to field sites.Able to work in fast-paced, schedule driven work environment. Possess the agility/adaptability to quickly move from one task to another when required.Strong people management & communication skills; willing to confront issues in an open, but tactful wayStrong organization and problem-solving experienceAbility to guide or mentor less experienced technical personnel within teamStrong group communication skills, presentation skillsDemonstrated strong financial and analytical skills (desired)Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail

Responsibility Level:The Principal Engineer is responsible to contribute to the product team through product design, testing, data analysis, and project management. The Principal Engineer will also support the manufacturing of the product representing the design team through initiating and executing design changes. All of these tasks also require strong communication skills and the ability to clearly present information to engineering teammates, engineering managers, and product management. The Principal Engineer is responsible to develop and maintain skill sets and work practices to align with the expectations and needs of the organization.Principal Duties (as related to functional responsibilities):Maintains understanding of theories, concepts, technical principles and processes related to fluid, thermal, and other mechanical aspects of water-cooled chillersContributes to the on-time completion of programs and regularly reports on the status of projectsHas proficiency in mechanical design and be able to conceptualize and implement design ideas into the productApplies mechanical codes such as UL, CE, PED and ASMEWork closely with the design and manufacturing teams in generating layout concepts and system configurations that consider the best balance of cost, performance, and reliability.Coordinate and help execute test programs to validate performance and reliability of mechanical systems and componentsAnalyzes, designs, modifies and/or troubleshoots mechanical sub-components and sub-systems based on test dataGenerate and review technical documentation for use within the product teamOccasional domestic and international travel (less than 10%)Teamwork and the ability to work with many teams is critical in our global product development environment. Each of these virtues must be consistently displayed with a focus on continual improvement of our team culture.Humble – willing to sacrifice self interests for the success of the teamHungry – diligent, self-motivated, and always looking for new opportunities to contributeSmart – able to read and interpret people and situationsRequirements:The requirements listed below are representative of the knowledge, skill, and/or ability required.BS in Engineering or related scienceMinimum 7 years of experience in a related fieldProficient with organizing and processing large amounts of dataStrong understanding of fluid and thermal principlesExperience with product development, project management, and sustaining of configurable systemsAbility to mentor and train other engineers.#LI-SI1#LI-Onsite

Summary:Provides structural analysis support on commercial, industrial and military HVAC products, primarily water and air-cooled chillers, including screw compressor and centrifugal compressor-based platforms. The position supports product development, warranty, sales and pressure vessel manufacturing.The individual conducts ASME Boiler and Pressure Vessel Code and other related design calculations and is typically a member of several product development teams. The individual has a good understanding of ASME and International Pressure Vessel Design standards. The individual has a basic understanding of the design, performance and cost of competitive equipment and knows how the JCI equipment is positioned in the market with respect to these attributes. The individual is very skilled in stress analysis techniques. Experience with FEA tools for application to stress analysis is desired.How you will do it:Provide analysis for optimizing designs for chiller components including pressure vessels.Provide analysis support for ASME pressure vessel certification of JCI products.Provide analysis support for Canadian Pressure Vessel Registration (CRN).Develop field modification procedures for pressure vessels.Plan, schedule, coordinate bi-yearly updates to ASME pressure vessel calculations.Review patents and papers to understand the limits of technology and IP in the industry.Provide root-cause analysis relating to warranty/service cases.Adhere to the Company's Business Ethics StandardsRequired:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The individual must have excellent verbal and written communication skills, particularly in the form of design reports and presentations. The ability to work with a team of engineers on fast paced projects and an understanding of the product development process (PDP) is a requirement.Bachelor's Degree in Mechanical Engineering. An MS in an engineering discipline is a plus. A Professional Engineer’s license is also a plus.Minimum of 4 years’ experience in equipment design. Experience with pressure vessels in the HVAC industry is a plus.Good understanding of applicable pressure vessel design and test standards, including those of the American Society of Mechanical Engineers (ASME), The Canadian Standards Organization (CSA), The European Pressure Equipment Directive (PED) and American Petroleum Institute (API).Skilled in the use of analysis software, particularly: ANSYS and Compress.Some travel will be required.Applicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States and with Johnson Controls.#LI-SI1#LI-Onsite

What You Will Do: Johnson Controls has a phenomenal opportunity for an Embedded Software Engineer to join our team located in New Freedom, PA, and contribute to the design and development of our cutting-edge Chiller products! Candidates must be commuting distance to New Freedom, PA, or able to relocate.As an Embedded Software Engineer, you will have the opportunity to design, develop, and implement embedded software solutions for our products. You will work closely with cross-functional teams, including hardware engineers, product managers, and quality assurance teams, to deliver high-quality software that meets performance and reliability standards. This position is ideal for an individual looking to take their career to the next level in a challenging and rewarding environment!How You Will Do It:Design, develop, and implement embedded software for various applications and platforms.Collaborate with hardware engineers to define system architecture and specifications.Write efficient, maintainable, and reusable code in C/C++ or other relevant programming languages.Conduct code reviews and provide constructive feedback to ensure adherence to best practices and coding standards.Develop and execute test plans to validate software functionality and performance.Troubleshoot and debug embedded systems, identifying and resolving software and hardware issues.Mentor and guide junior engineers, promoting knowledge sharing and best practices within the teamWhat You Will Need:Required Bachelor’s degree in Computer Science, Computer Engineering, or Software Systems Engineering.8+ years of experience in embedded software development.Proficiency in programming languages such as C/C++, Python, or similar.Strong understanding of embedded systems architecture and real-time operating systems (RTOS).Experience with firmware development.Experience with hardware/software integration and debugging tools (e.g., oscilloscopes, logic analyzers, JTAG).Familiarity with version control systems (e.g., Git) and software development methodologies (Agile, Scrum).Preferred Familiarity with connectivity protocols (e.g., Bluetooth, Wi-Fi, Zigbee).Knowledge of embedded Linux or other operating systems.Experience in developing automated testing frameworks and strategies.Familiarity with equipment communication protocols (e.g., BACnet, CAN, Modbus).#mango#embeddedsoftwaresystems

What you will doPerforms detailed engineering tasks to include evaluation of engineering alternatives, analysis of data, calculations, CAD drawings, preparation of specifications and reports for the design, development, construction, and commissioning for mechanical, refrigeration, and process (MRP) elements required for HVAC test facilities. This position interacts with engineers, suppliers, and other departments to facilitate project completion. Project work includes MRP systems that simulate precise and extreme environmental conditions including temperature, humidity, precipitation (rain, snow, ice, fog, salt, etc.), air flow, liquid flow, and high-pressure vapor flow.How you will do itDevelop conceptual designs and cost estimates for related MRP project elements during budgeting (Capital Appropriations Request, CAR) and initial project phases.Collect, analyze, and interpret data, develop engineering computer programs (e.g. Excel, EES, LabView) and designs basic process systems, sub-systems, and components.Prepare final designs including drawings, requests for quote (RFQs), bills of material (BOMs), and construction specifications. Responds to contractor and engineering requests-for-information (RFIs).Coordinate with electrical, controls, and other disciplines to facilitate state-of-the-art designs for complete HVAC test facility projects.Create refrigeration and process system designs and develops piping and instrumentation diagrams (P&IDs) for projects that simulate precise and extreme environmental conditions including temperature, humidity, snow, air flow, liquid flow, and high-pressure vapor flow.Review project designs for compliance with applicable national and local codes, engineering principles, industry best practices, company standards and related specifications.Plan and conduct on-site startup, troubleshooting, adjusting, testing and commissioning of MRP systems for all test facility projects.Facilitate all capital planning & executionOperate in compliance with JCI safety, quality, confidentiality, and ethics policies, including completion of recurring on-line training modules with self-certificationPerform other duties as assignedWhat we look forBachelor of Science Degree Mechanical Engineering from ABET accredited university; master’s degree or PE registration preferred.Minimum of 8 years’ experience with mechanical engineering design in the HVAC industry; or 6 years work experience after the completion of a MSME degree or PE license. Working knowledge of applicable industry codes and standards including ASHRAE, AHRI, UL, AMCA, ASME, ANSI, SMACNA, UBC (ICC) and others.Proficiency in Microsoft Windows operating environment, including e-mail and Microsoft Office software; and AutoCAD or equivalent engineering document preparation.Ability to operate independently on detailed individual tasks with a high level of accuracyAbility to multitask and work with various stakeholders as neededStrong organizational and record keeping skillsStrong verbal and written communication skills using EnglishEffective and professional interpersonal skills to contribute as part of internal customer service team#LI-SI1#LI-Onsite

What you will doAs a Senior Engineer, you will be part of the test laboratory team making a significant impact on our organization! The software you develop will be used to support test lab operations and drive efficiency improvements. You will perform standard engineering assignments to support LabVIEW software development of automated computer systems within the test lab. These systems will encompass system control, data acquisition, data storage, data retrieval, analysis, and reporting. Your programming expertise will contribute to enhancing our existing capabilities and implementing new features. Collaborating with cross-functional teams, you will define and develop software requirements. We want you to bring your analytical thinking skills combined with your experience to apply design patterns, standard methodologies, and engineering principles to develop robust, scalable, and maintainable solutions.How you will do itProvide LabVIEW computer programming to support effective and accurate testing processes at the JADEC Test Lab.Craft and develop Supervisory Control and Data Acquisition (SCADA) systems including hardware such as data acquisition devices, instrumentation, and sensors.Deploy, test, and troubleshoot SCADA systems.Participate in Data Acquisition (DAQ) team discussions and collaborate with Test Lab client group members to develop software requirement specifications.Provide complete product documentation and technical instructions for developed software.Provide technical support and training to Test Lab client groups for our internal software systems.Collaborate with other software developers both internally and externally to enhance our capabilities.Collaborate with Test Lab Management, Test Engineers, and Test Technicians to meet client testing needs and schedules.Demonstrate preferred JCI behaviors and carry out the Company’s Code of Conduct and Business Ethics standards.What we look forBachelor of Science or Master’s degree in Electrical Engineering, Mechanical Engineering, or Electro-Mechanical Engineering.5+ years of LabVIEW software development experience in a test lab or similar environment. Experience developing LabVIEW object-oriented code. Certified Associate Developer (CLAD) is Required; LabVIEW Certified Developer (CLD) or LabVIEW Certified Architect (CLA) strongly preferred.Experience with electronic control systems including PID control loops, ability to understand and produce P&ID packages.Ability to support system modeling, system simulation and verification is highly desiredExperience with Database Management Systems and their design principles. SQL Server and SQL programming language.Experience with a managed development language such as C#. Ability to maintain and upgrade existing applications.Ability to operate independently on individual projects and effectively manage multiple concurrent projects to meet required timing and schedules.Ability to work in fast-paced, schedule driven work environment with structured development processes while being adaptable to changing priorities and requirements.High level of logical thought processing and trouble shooting skills to identify and resolve software and hardware issues.Highly effective and professional people skills required as part of an internal customer service team.Strong verbal and written communication skills required.Proficient with business efficiency software and Microsoft Suite Applications (Teams, Word, Excel, Access, and PowerPoint) and familiarity with software DevOps tools (version control, configuration management, issue tracking).#LI-SI1#LI-Onsite

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. This position is not eligible for Visa sponsorship. What We Offer:Competitive salaryHybrid work opportunity (upon the completion of training)Paid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care– available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:This position is within the water-cooled chiller product engineering team. We are seeking a senior engineer to work on chiller PLC control solutions for both new product and chiller retrofit opportunities. The role would focus on both software and hardware solutions for chiller PLC products. As Senior Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and applications engineering. In this role you will work on control systems for new industrial chiller applications as well as retrofits, hardware design, design test and sustain control panels and system wiring.How You Will Do It:Develop and maintain electronic hardware and software (temperature sensors, pressure sensors, flow sensors, and A-B software) .Design of analog and digital interface circuits, development of power supply circuits and/or selection of power supplies.Perform the worst-case circuit analysis and incorporation of appropriate reliability principles to ensure reliable operation over the environmental specifications.Assist chiller team to develop, test and support chiller system controls (This includes selection of system components and accurate interfacing of them to electronic control panel I/O). Acquire agency approvals such as UL, CE and FCC on Printed Circuit boards and Electronic Panels.Independently conduct and apply costing analysis to feasibility studies on proposed designs or modifications to existing designs.Develop schedules which accurately reflect the project breakthroughs and implement to them.Integrate new and modify existing processes to cover all phases of the electronic development process.Provide mentorship and support to:Drafters and DesignersService and Field TechniciansManufacturing on Commercial Systems products.Provide mentorship to drafters and support Service and Manufacturing on Commercial Systems products.Prepares and participates in design reviews.Learns and applies regulatory codes such as UL, NEC, CSA, and CE codes.Proficient at capturing and analyzing test data to identify electrical performance problems and propose solutions for corrections.What We Look For:RequiredBSEE,BSEET, BSEMET,or related fieldPreferred candidate to have 5 years of valid experience with one or more of the following.PLC programming and troubleshooting.HVAC systems and controls.Automation control systems.Electrical systems, wiring diagrams, and troubleshooting (24VDC, 120VAC, & 240VAC).Ability to work in a fast-paced, schedule driven, team-oriented environment.Ability to program and debug PLC programs.Ability to identify obsolete parts for PLCs, HMIs, Network switches and protocol translators for customer upgrades.Provides secondary level product support to the field after product technical support resources are exhausted for PLC applications.Experience with Allen Bradley PLCs and Rockwell software (rslinx, FactoryTalk, Studo5000, Activation Manager, etc.).Good verbal and written communication skills are required.Must be willing and able to travel domestically and internationally as required (up to 10% of time).PreferredUnderstands chiller controls.Familiarity with HVAC Systems and motor driven mechanical engineering design and test, alternative experience with gas compression would be advantageous.Chiller PLC experience.#LI-Hybrid

Build your best future with theJohnson Controlsteam!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What We Offer:Competitive salaryPaid vacation/holidays/sick time-15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day one!Encouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You will do:Our Sr Product Technical Support Engineer provides day-to-day technical support for Global Products to Field Sales & Service organization on a global basis via site visit, phone, or email. Primary focus will be the Americas. This position is not eligible for Visa sponsorship.How You Will Do It:Accountable to create and maintain technical service bulletins, service letters, and updates to the Solutions Database that meets and or exceeds internal and external customer expectations.Accountable for timely and high-quality product service literature and technical support case notes.Supports regional territories for escalated chiller technical support cases, warranty claims in a timely and consistent manner to facilitate data mining by, product, failed component, defect, and responsibility.Drive product reliability through the Continuous Improvement Process for both existing products and new products being introduced.Technical Support Regional Manager provides technical support and interacts with service branch leadership regularly to drive improvements at the branch level and will support key customer accounts as a technical resource to the branches.Must be participative in the quest to educate other JCI associates in technical discussions on why a failure mode exists and the impact to the equipment and customer.Must be proficient in troubleshooting the refrigeration cycle as applied to air-conditioning duty on Global Products chiller equipment. Must be aware of planning to provide global support.Is a participant of the Product Development Process and can assist in defining and coordinate specifications for chiller systems.Adheres to the Company's Code of Conduct and Business Ethics Standards.Develop and maintain " a customer for life.”Provide technical support to on-site audits of GP plants, suppliers, and customer sites if required.Can represent the organization in planning programs to enhance our ability to maintain and grow the equipment business.What We Look For:RequiredBachelor’s degree in engineering or a related Technical/Scientific field required and 8 years of technical experience with a knowledge of HVAC&R products OR 10 - 14 years of technical experience with a knowledge of HVAC&R products.Must be able to analyze and solve complex product system problems.Proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as Internet software, Salesforce and E-mail.Ability to travel domestically up to 30% and occasionally internationally.