RoadSafe is looking for Flaggers to join our team!
Applicants must pass a drug test.
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below.
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment ( work boots 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Generally, works under the Supervision of Project Manager, TCT, TCS or maybe assigned to work independently Adhere to all Company Policies and Procedures Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Must be able to communicate with contractors and relate specific customer/job changes, and other information to Supervisor, Project Manager, office staff or other persons Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: $1500 Sign on Bonus Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer 
Qualifications: Must be 18 years or older Pass a drug test Driver’s license required Must be able to speak and read English Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification, Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training All candidates subject to a background check
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Driven by our Purpose, we are committed to building a more sustainable future to make the world better for everyone. With more than 16,000 employees in more than 50 countries, we combine our global reach with local presence. We support more than 10,000 customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. Join a company where the people challenge themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. You will be part of a team known for its industry-leading talent, unparalleled portfolio, and unmatched commitment to customer success. Flowserve’s culture promotes recognition and rewards creativity, hard work, and commitment. We invite you to put your talents and career in motion at Flowserve Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. 2nd shift position Responsibilities: Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma or GED or equivalentEquipment Experience – 5+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits The pay range for this role is $29.61 - $44.44per hour. Req ID : R-10063 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

At WK Kellogg Co, we exist to create joy and connection to inspire Gr-r-reat days. We believe that doing good is always good for business and we have stood for this since Kellogg Company was founded more than 117 years ago. We are passionate about doing our part to make nutritious foods, create social connectivity and respect natural resources. Together, these actions create positive progress for people and the planet – today and for years to come. We have big plans for how we are going to accomplish this, and we would love for you to join us in this effort. Do you have a skill set for working with electrical and mechanical components Join us in our state-of-the-art facility as aMaintenance Electrician in Lancaster, PA making Frosted Flakes, Shredded Wheat, Raisin Bran, and Crispix Cereal!Kellogg is looking to bring out the tiger in you by utilizing your skill set troubleshooting, repairing, and collaborating on electrical components! In this role you will partner with Operations, Quality Food Safety, and Environmental Health and Safety personnel as you keep the plant and production running. You will act as a problem-solver who helps our company maintain a strong reputation and market share!HERE’S A TASTE OF WHAT YOU’LL BE DOINGMaintaining Equipment and Utilizing Your PLC Knowledge- You will be alternating in between troubleshooting, preventive maintenance, and on the spot machine repair. You will need a firm focus and understanding of programmable logic controllers and robotics. Candidate must be able to maintain proper documentation, electrical upgrades, and make modifications and improvements. Analyzing Conditions and Providing Solutions- Identifying and examining production equipment failures to understand root cause analysis, with the help of interpreting schematics and drawings. Investigating, analyzing and repairing electrical systems while working with PLC programming and other computer-based applications.Driving Innovation and Communication- Actively improving plant efficiency and identifying cost saving opportunities. While maintaining an open dialogue with Maintenance Supervisors, Maintenance Mechanics and Operators, on day-to-day activities and long-term improvement projects.Incentives to join our team!$36.76/hour with shift differential2nd Shift: 3pm-11pm, 3rd Shift: 11pm-7amUp to a $5,000 sign on bonus!Incredibly competitive benefits package401k matchEmployee Stock ProgramYOUR RECIPE FOR SUCCESSRequired:3 years experience with a Journeyman’s OR Electronics/Technical Degree OR 5 years of Industrial Electrical Maintenance without degreePLC Troubleshooting experienceHigh School diploma or GEDBasic computer skills including Microsoft OfficeDemonstrated knowledge of behavior-based safety systemsSitting, standing, walking, lifting and / or repetitive tasks throughout the day. Employee will be required to occasionally lift up to 50lbsBonus Points:Previous experience working in a food manufacturing plantPrevious experience with AutoCAD, and SAPABOUT WK KELLOGG COAt WK Kellogg Co, we bring our best to everyone, every day through our trusted foods and brands. Our journey began in 1894, when our founder W.K. Kellogg reimagined the future of food with the creation of Corn Flakes, changing breakfast forever. Since then, we have embraced the same spirit of innovation and entrepreneurship in everything we do, channeling our founder’s passion and commitment to creating high quality and delicious products while fostering communities. Our iconic brand portfolio includesFrosted Flakes, Rice Krispies, Froot Loops, Kashi,Special K, Raisin Bran,Frosted Mini Wheats, andBear Naked. With a presence in the majority of households across North America, our brands play a key role in enhancing the lives of millions of consumers every day, promoting a strong sense of physical, emotional and societal wellbeing. Our beloved brand characters, including Tony the Tiger and Toucan Sam, represent our deep connections with the consumers and communities we serve. For more information, visitwww.wkkellogg.com.WK Kellogg Co is proud to offer industry competitivebenefits(Physical, Financial, Emotional, and Social) that vary depending on region and type of role. Be sure to ask your recruiter for more information!If we can help you with a reasonable accommodation throughout the application or hiring process, please THE FINER PRINTThe ability to work a full shift, come to work on time, work overtime as needed and the ability to work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position.WK Kellogg Co is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law.For US applicants:Where required by state law and/or city ordinance; this employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization. For additional information, please follow thislink.Let’s create gr-r-reat days, WK Kellogg Co Recruitment

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

Description: Milton Hershey School (MHS) is a tuition free, home, and private school for over 2,000 Pre-K through 12th grade students. Founded in 1909 by Milton and Catherine Hershey, the lives of more than 11,000 students have been positively transformed through MHS’s high-quality career-focused education, nurturing home life, and extensive extra-curricular opportunities. MHS is currently seeking full-time Maintenance Technicians II – HVACR/Plumber to join the team. This position’s primary focus will be providing heating and cooling service, repairs, and maintenance for various residential and commercial facilities. Additionally, this position requires proficiency and diagnostic abilities in all mechanical trade disciplines including, but not limited to plumbing, residential & commercial appliance repairs and minor electrical repairs. The incumbent is required to demonstrate journeyman level skill through successful completion of a written and practical exercise. All work is to be performed in accordance with all state, local and federal codes, and regulations, and may require licensing. Work assignments will be based on the overall skills of the Technician; however, this position is required to support any of the mechanical trade disciplines. Some of the required skills and abilities are: Demonstrated knowledge in the installation, repair and maintenance HVAC/R, plumbing, and electrical systems.Demonstrated troubleshooting ability with respect to electronic controls (prior experience with a Building Automation system is a plus).Demonstrated ability to utilize hand tools, power tools and analytic tools (all tools are provided by MHS).Physical ability to perform all aspects of the job, including the ability to lift 50 pounds.Ability to utilize electronic devices (i.e. tablet) and software for work order management and communication.Ability to work independently and as a team. The work schedule is year-round, full-time, flex schedule with forty (40) hours per week with a minimum of two (2) consecutive non-workdays. A flex shift employee works a combination of the shift times listed below to be scheduled as determined by the needs of the school. Standard hours of operation may change due to seasonal or programmatic changes. 7:00 a.m. – 3:30 p.m. 3:00 p.m. – 11:30 p.m.11:00 p.m. – 7:30 a.m.Monday – Friday – 11:00 p.m. – 7:30 a.m. – 8-hour shift (Current Need)Wednesday – Saturday – 1:00 p.m. – 11:30 p.m. – 10-hour shift (Current Need) Bargaining unit position with OPS-464. In addition to a competitive salary ($32.49 an hour plus 5% second shift differential and additional Saturday shift premium) our full-time employees receive generous health and insurance benefits (medical, dental, vision, life insurance, etc.). Vacation and Paid Time Off, a company truck (utilized when on campus only), all tools as required (campus use only) and no on-call responsibility. Qualifications: High School Diploma or Equivalent required.Minimum of 3 years' experience working in commercial and residential settings in conjunction with post-high school technical training in relevant fields such as Heating, Ventilation and Air-Conditioning & Refrigeration Plumbing and Appliances. Or, six (6) years of relevant current work experience in an institutional and residential application.EPA Level 2 Refrigeration Certification minimum, Universal Certification a plusValid PA Driver’s License in good standing. CDL license a plus.OSHA 10-Hour Training. OSHA 30-Hour Training a plus.MEWP (Mobile Elevated Working Platform) Certification a plus.Backflow Prevention Device Tester Certification a plus.Demonstrated high degree of integrity, as all MHS Staff are role models for MHS Students.Candidates should be willing to actively engage with students.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Remote - Pennsylvania- Exton, PA,United States (US) Employment Status: Hourly Full-Time Function: Customer ExperiencePRIMARY FUNCTIONResponsible for providing field service and support including, installation, maintenance, and training on various types of industrial automation equipment. Service & support activities will be performed both on-site at a customer’s facility or in-house at a company owned location. Core objective of high level of attendance and successful completion of Lincoln Automation Field Service Technician Trainee program. RESPONSIBILITIES Provide support for system installs and maintenance.Deliver a consistent, positive, and exceptional customer service experience.Work environment may be individually focused or working with a team.Take initiative to meet challenging project timelines and budgets.Ability to travel as required (install, start-up, or field support) to successfully complete projects.Ability to support all aspects of equipment install (Rigging, alignment, wiring, startup, etc.)Complete all work related documentation on time.Participation in “soft skills” trainings to develop strong customer-facing capabilities.Assist in any other activities that help to support ongoing strategies.BACKGROUND EXPERIENCE Preferred experience in robotic processes.Preferred Hydraulic/Pneumatic/Lubrication system troubleshooting experience.EDUCATION/TRAINING/EXPERIENCE Minimum requirement: High school diploma or GED (technical or vocational school preferred)Preferred: Associates degree focused in electrical, mechanical, mechatronics, or roboticsPHYSICAL DEMANDS While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.WORK ENVIRONMENTThe work environment is inside manufacturing facilities. Proper person protective equipment (PPE) is required at all times while in manufacturing facilities. The noise level in the work environment is usually moderate.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $82,500K Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations while acting as a resource and technical expert to engineers. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.Provide technical expertise and consultation through direct involvement and as a subject matter expert when consulted to identify and resolve equipment and system problems.Directly fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Perform engineering tasks as assigned by supervision applying engineering principles.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSProfessional Engineer RegistrationAdvanced technical degree or related coursework

What you will do:Do you have HVAC experience We are looking for skilled Journeymen who have worked in residential, light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.What we look for:RequiredRequires Mechanical Journeyman status5+ years of residential / light commercial /commercial HVAC / mechanical troubleshooting experience.Valid driver's license, appropriate licenses to work with refrigerants, boiler and steam operational & service knowledge.Good verbal and written communication skillsThis is a Bargaining Unit Position.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P GlobalPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:• Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned.Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities: Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks.Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems.Required to have demonstrated knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Ability to use vehicle diagnostic software.Up to 3 years as a fleet mechanic. DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. Education and Experience: High school diploma, completion of G.E.D Required. We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $27 - $33 / hour #CAZL ExperienceRequired2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience.3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.3 year(s): Experience in repair and service of trailers and medium duty trucks.EducationRequiredHigh School or better

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive payMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: Project/Business Responsibilities: Maintain all company fleet vehicles for routine and preventative maintenance and repairs.Maintain records for all company fleet vehicles, including licenses, inspections, and insurance cards.Maintain records of all service and repairs to all company fleet vehicles.Manage a small inventory of essential parts and supplies for performing routine service and repairs.Source and procure all needed items from established vendors seeking the best price and quality. All items are to be bought with purchase orders. Submit all packing lists and documents to accounting for proper payment and tracking.Identifies mechanical problems either visually or with computer diagnostic equipment.Fill out a shop work order for all vehicles worked on every day. Have sufficient information on each work order to ensure accurate billing and inventory movement.Plans and establishes timetable to complete repairs and maintenance. Close work orders promptly.Make minor repairs on motorized shop equipment such as lifts, tow motors, etc., as requested.Drive a company vehicle, when required, in a safe manner. Qualifications: Project/Business Management:Ability to problem solve and troubleshoot.Good mechanical skills.Effective communication skills and the ability to schedule appointments with co-workers.Ability to read service and repair manuals.Proficient with computer diagnostic equipment and software.Maintain and clean garage equipment and tools to ensure they are always kept in a safe and usable condition.Ability to take direction from Supervisor and or management.Safe driving record.High school diploma or GED, course work at an accredited vocational, technical or trade school.Minimum of 5 years of experience or an equivalent combination of experience and trade school trainingA valid Pennsylvania inspection and emissions licenseAbility to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use typical business tools, including E-Mail, Word, Excel, etc. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

MAINTENANCE TECHNICIAN Reading, PA, USAReq #6786 Monday, September 11, 2023 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Pay and BenefitsPay Range from $25.41/hr - $38.33/hr based on skills and experience.Excellent Benefits Package including Health, Dental, Vision, and 401K Plan.1.5 pay over 40 hours.Uniforms provided.Up to 100 paid training hours annually for technicians to advance through the progressive skill levels.Stipend for safety shoes and safety glasses.RESPONSIBILITIES:Perform a variety of maintenance tasks to diagnose, repair, rebuild, replace mechanical, electrical, PLC, hydraulic and pneumatic systems on all plant equipment and facilities. Use maintenance knowledge to increase productivity, decrease downtime and waste.Work with a sense of urgency to respond to machine downtime events.Will be required to complete in-house training programs to develop equipment specific maintenance skills.The position may also require attendance at external training that may require occasional overnight travel. Must be able to follow all safety and company policies that include lock-out tag-out procedures. BASIC QUALIFICATIONS:At least 1 year of experience successfully troubleshooting and repairing industrial manufacturing equipment.Must have knowledge and experience with repairing and maintaining mechanical, electrical, hydraulic, pneumatic, PLC systems and industrial equipment. Be passionate about maintaining a safe and clean work environment. Ability to work any shift, overtime, and weekends as needed.Must have own basic tools (PCA will provide specialized tools).Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Technical degree and/or comparable experiencein successfully troubleshooting and repairing industrial machinery and equipment; particularly within the corrugated or packaging industry. KNOWLEDGE, SKILLS & ABILITIES: Excellent communication skills.Basic computer skills. Ability to work in a fast-paced environment. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyJob Start DateMonday, September 11, 2023

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Automotive Technician position at our Hertz Rent-A-Car location. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Hertz Corporation, a world leader in the car rental industry, currently seeks energetic team players to join our team. Wages $20.50 The Automotive Technician is the second level within the Hertz Corporation for our maintenance team. In this role you will be performing preventative maintenance, minor repairs, and inspection. Educational Background: High School Diploma or equivalent preferred Professional Experience: At minimum one (1) years of vehicle maintenance experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending*eligibility requirements vary by position**medical plans vary by locationJob Title: Ammonia Refrigeration Manager Job SummaryTo maintain Ammonia Refrigeration equipment and perform maintenance activities for buildings and equipment to support facility operations. Ammonia Refrigeration Manager is responsible for the Plants Ammonia System and ensuring all Compliance and Safety concerns are met per the EPSM. The Ammonia Refrigeration Manger is responsible for Training, Scheduling and Managing Refrigeration Tech and to ensure Ammonia Refrigeration Tech meets all requirements and safety training to ensure Ammonia System meets and performs for buildings. Major Tasks, Responsibilities, and Key AccountabilitiesComplete proper and timely preventative maintenance to ensure equipment and systems in the ammonia refrigeration system (such as compressors, condensers, evaporators, pumps, vessels, valves, purge’s, etc.) operate efficiently, properly, and safely while also down time. Replace defective refrigeration equipment as needed. Control the equipment temperature set points to accommodate the needs of our customers and maintain the integrity of the product. Maintain control of the water treatment system and associated chemicalsEnsure all paperwork and reports are accurate, completed on time and meets OSHA and EPA regulatory requirementsMonitor third party maintenance vendors working near or with ammonia refrigeration system to ensure compliance with company, OSHA, and EPA safety policiesPerform ammonia and oil sampling for analysis on regular scheduleTrain team members on ammonia leak and spill procedures, coaching those team members who require additional training to meet the standardParticipate in leak and spill drills to meet requirementsActively participate in Emergency Response planning for locationInspect, test and calibrate ammonia detection system as neededQualifications/Experience/EducationEducation - High school diploma or GED. College coursework, continuing technical education or comparable business experience, documented electrical certification experience 480/ 3 phase and control voltage preferredMinimum 3-5 years Ammonia Refrigeration experience requiredKnowledge of Process Safety Management (PSM), or ability to receive in-housePSM training within 90 days requiredCertified Assistant Refrigeration Operator (CARO) Level 1 certification fromRefrigerating Engineers & Technicians Association (RETA) or RefrigerationOperator Class 1 license or ability to obtain within 1yr of hire requiredKnowledge of Computerized Maintenance Management Systems (CMMS)Must be able to Supervise a small group of para-professional staff in an organization characterized by highly transactional or repetitive processes. Contributes to the development of processes and procedures. Typically requires 3 years experience in the related area as an individual contributor. Thorough knowledge of functional area under supervision. Bilingual PreferredJob ConditionsIndependently lift up to 40 lbs frequently and 60 lbs occasionallyAble to sit, stand, walk bend, squat on a frequent to continual basis in a refrigerated warehouse environmentAble to grasp, reach, push or pull (such as boxes of product, or a hand truck) on a frequent basisAble to step up onto and down from equipment as required by task (such as forklift, reach truck, etc.)Endurance for continuous, fast paced workMust be able to pass respirator fit test, wear respirator and may be required to wear Self-Contained Breathing Apparatus (SCBA) if authorized & trainedAble to adjust to fluctuating temperatures and withstand freezing temperatures as low as -20 degrees FahrenheitAbility to work in a noisy warehouse environmentAbility to work at elevated heights while wearing PPE (Personal ProtectiveEquipment) for the job (such as fall protection harnesses)Able to work while wearing appropriate PPE (Personal Protective Equipment)for the job (such as steel-toed protective footwear, harness, safety glasses, hardhat, gloves, insulated clothing, etc)Ability to handle and physically be near products which may contain food allergens (such as fish, shellfish, peanuts, etc.)Ability to utilize equipment for the job (such as computers, cell phone, handheld trackers, copiers, scanners, printers, etc. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $82,000.00.

R20425100889201 Bucky Drive, Lititz, Pennsylvania 17543T ruGreen accepts applications on an ongoing basis. Job Description Field Operations Every TruGreen associate is committed to quality. We all have an important role to play in the success of our company. There is no job too small or too great that doesn't equally impact our future.We know there is no business without the people behind our brand that make it - and our services - a reality. You play a critical role in contributing to a high-performing team.At TruGreen, we are committed to our customers, our teams, our values and the science of lawn care. A career with TruGreen is a career full of new opportunities to learn and take pride in your work.#BeTruGreen and find yourself with a satisfying and rewarding career.What's In it for YOU!A job that keeps it interesting-no two days are alike, and you get to work outside instead of inside a stuffy officeAwesome teammates who are dedicated to our values, customers, lawn science, and YOU!Competitive wages* Average income is $850 - $1,200/week (based on an hourly rate and average bonuses earned for qualifying specialists meeting performance expectations)Affordable medical and prescription drug plansFinancial health resources, including 401kTraining & DevelopmentPaid Time Off/Sick LeaveYour ResponsibilitiesYou are a TruGreen ambassador, responsible for creating positive relationships between our customers and our products. You help our customers live life outside.Responsibilities include:Administer timely lawn applicationsDiagnose and correct customer problems through service calls and other communicationsRecommend and sell products and service information to new and existing customers, resulting in growth of our customer baseComplete production reports, new sales forms, customer invoice forms, daily vehicle inspection report, and cancel/skip noticesNote: All positions require a valid driver's license, and some may require appropriate state/local licensingIncluded RolesLawn Specialists (Residential or Commercial)Tree & Shrub SpecialistAeratorLaborerWarehouse TechnicianAs America's number one lawn care company, TruGreen® is dedicated to using our science-based expertise and local experience to create beautiful, healthy properties across the nation. Through our lawn and tree & shrub services, we help improve the health and beauty of outdoor spaces everywhere, so people can Live Life Outside.Ability to speak, read and write fluently in English is required.You MUST BE physically located in the United States while performing this job.TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit https://trugreen.phenompro.com/us/en/eeoc-and-eeo-policy or to request an application accommodation, please visit https://trugreen.phenompro.com/us/en/disabilities-accommodationsCalifornia Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.TruGreen performs pre-employment testing.To view our disclaimer, https://trugreenjobs.com/us/en/disclaimer

JOB DESCRIPTIONResponsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start-up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assignedRequirements:We work a continuous schedule - 12 hour shifts, work 3 nights one week and 4 nights the following weekHigh School Diploma or GED3-5 years experience in maintenance within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesPrior experience in injection molding or metal can assembly is not required, but is a plus #INDYork Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

This position is responsible for spray equipment (e.g. airless, conventional, electrostatic, pressure washers) at the store or at customers’ job sites. This includes performing necessary repairs, providing training on equipment, and maintaining inventory as required. Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! What is the Process to get Started Step 1 – Online Application Find the role(s) that interest you on our Careers page: https://jobsearch.sherwin.com/ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Support the sales efforts at a Sherwin-Williams paint store, servicing wholesale and retail customers.Perform repairs on all types of spray equipment (e.g. airless, conventional, electrostatic, pressure washers.) at the store or at customers’ job sitesConduct hydraulic and warranty repairsRebuild pumpsRepair branch tinting and mixing equipmentEducate other employees and customers on spray equipmentMaintain an inventory of spray partsMinimum Requirements: Must be at least eighteen (18) years of ageMust be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the futureMust be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasionMust be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation Preferred Qualifications: Have a valid, unrestricted Driver’s LicenseHave at least a High School diploma or GEDHave prior work experience repairing spray and/or hydraulic pumps and equipmentHave at least one (1) year experience working in a delivery, retail, or customer service positionHave previous work experience selling paint and paint related productsHave previous work experience operating tinting and mixing equipmentAbility to read, write, comprehend, and communicate in more than one languageAbility to read, write, comprehend, and communicate in Spanish

DIESEL MECHANIC Location: Towson Compensation: $25.00 per hour First Year Earning Potential of $52k DIESEL MECHANICS NEEDED!Coach USA has new and exciting career opportunities for Mechanics at our Towson, MD location. We are looking for a mechanic to repair and inspect company equipment in a cost effective, safe, timely manner. Talk to us about possible Relocation Package.We Offer: First year earning potential of $52K (Negotiable with experience)Full Benefits offered to top full time employees: Medical, Dental, Vision, and Life Insurance401K Retirement planPaid VacationDirect Deposit availablePaid weekly Qualifications: Class A: Master Mechanic with 5 years’ experience on trucks, buses, or heavy equipmentClass B: Mid-Level with 3 years’ experience on trucks, buses, or heavy equipmentClass C: Entry level with 1 year experience Requirements: Formal technical training degree, certificate or diploma or equivalent work experiencePossess strong managerial and organizational skillsAbility to bend, stoop, crawl, walk and sit on a regular basis with frequent lifting of up to 50 poundsDiesel experienceValid Class A or B CDL with Air Brakes and Passenger endorsementEffective written and oral communication skills Veterans are encouraged to apply!Come Join the Coach USA-Towson team!To learn more about your next big career change, APPLY NOW! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class.

Clean Harbors in Logan, NJ is seeking a Field Service Foreperson for our ICSS Division to join our safety conscious team. This position will be responsible for the direct supervision of the Field Technicians. Forepersons and Technicians will be responsible for the performance of tasks associated with emergency response (emergency spill cleanup), hazardous waste clean-up, site-remediation (tank and pit cleaning), equipment decontamination and handling of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. This position supports the Southern Mid Atlantic District. This position will travel up to 50% throughout, New Jersey, Philadelphia, Delaware, and Maryland. Must be able to travel within a 3-hour radius with overnight stays. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursement Key Requirements:Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerTrain and mentor the Field Service TechniciansExecution of projects/jobs within budget and on timeEnforce and ensure OSHA, EPA and H&S standards or regulations are compliantUnderstand and work with the Coordinator in the communication of manpower, equipment and resources required to complete field service and emergency response projectsManage large scale field service and emergency response projects when directedEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryComplete associated paperwork, such as worksheets, vehicle inspections, equipment inspections and permitsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsBy position, may perform lead responsibilitiesRequired Qualifications:Previous experience in a physically intensive rolePrevious experience in a supervisory, crew lead or leadership roleAbility to travel for extended periods of time, overnightAbility to be on-call for emergency responseValid Driver’s licensePerform physical functions per job requirementsPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.Preferred Qualifications:Previous heavy equipment experience (bobcats, excavators, etc)Previous environmental and/or industrial experience (ie. site remediation, spill response, hydro blasting, vacuum truck, tank cleaning, refinery-based work)Commercial driver licenseClean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH#LI-LT1

Overview: Machine Operator| HIRING IMMEDIATELY | Downingtown, PAAvailable Shift: 3:00PM-11:00PMAPPLY ONLINE!Immediately Hiring Machine Operators!Machine Operator available shifts: 2nd and 3rd shift (Overnight available)Compensation:Starting rate at $21.63 per hourPay differential added for shifts. on 2nd shift and 3rd shiftEligible for annual wage increasesAdd EXTRA money to your paycheck by referring friends and familyBenefits:Medical (two plans, an HMO plan and an HRA/PPO plan)Dental (basic and comprehensive coverage)Vision (included with the HMO plan)Prescription drug coverage401K with a 4% company match (Eligible to participate after one year of service as an employee)New Hire Wellness Bonus (see plan details)Healthcare and Dependent day care flexible spending accountsLivongo diabetes programCorporate discountsOur Social Responsibility platform features a robust, employee-led Give Back program, which includes a matching gifts plan, community grants initiative, and our annual Company-wide Month of Action campaign. With each of these initiatives, our employees are empowered and equipped to give back to their communities and support the non-profits important to them and their families. Through our Give Back program, we own our commitment to Social Responsibility and live our purpose of Packaging a Better Future. Responsibilities: SUMMARY:Consistently operates a zone of forming machines at or above standard levels of operation considering waste, efficiency and utilization. Trouble shoot, identify and correct machine related problems through proper adjustments to various parts of the machine.ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties performed by employees in this position will include, but not be limited to the following:Consistently operates zone of forming machines at or above standard levels considering waste, efficiency and utilization.Troubleshoot causes of machine malfunctions. Make appropriate adjustments or repairs to ensure that the quality of the cartons meeting specifications and that the machines operate properly.Conducts quality checks at regular intervals. Takes corrective action to fix defects identified.Performs minor repairs during production.Performs changeovers.Performs weekly machine maintenance.Communicates with the operator from the previous and following shifts and with supervisors to review any problems experienced on the machines throughout the department.Performs purge procedures when changing to a new product and completes the required checklists.Follows LOTO and alternative LOTO procedures.Maintains a clean and orderly work area. Qualifications: Education:HS diploma or GED equivalent is required!Pactiv Evergreen Inc. (NASDAQ: PTVE) is a leading manufacturer and distributor of fresh foodservice and food merchandising products and fresh beverage cartons in North America and certain international markets. It supplies its products to a broad and diversified mix of companies, including full service restaurants and quick service restaurants, foodservice distributors, supermarkets, grocery and healthy eating retailers, other food stores, food and beverage producers, food packers and food processors. To learn more about the company, please go to the company website at pactivevergreen.com.Downingtown is a borough in Chester County, Pennsylvania, 33 miles west of Philadelphia. As of the 2010 census it had a population of 7,891. Downingtown was settled by English and European colonists in the early 18th century and has a number of historic buildings and structures. The plant was built in 1979, manufactures paper cups and cartons, and has approximately 200 employees. Pactiv Evergreen is committed to a diverse and inclusive workforce. Pactiv Evergreen is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age national origin, physical or mental disability, genetic information, gender identity and/or expression, marital status, veteran status or other characteristics or statuses protected by law. For individuals with disabilities who would like to request an accommodation, pleasecall or email .All information will be kept confidential according to EEO guidelines and applicable laws.

The pay range per hour is $36.50 - $40.50Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Job DescriptionEngineering & Facilities (MT2)About job:Tuition Reimbursement programBenefits eligible after two weeks of employmentCurrently hiring for below shifts:L2 Key - Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential) About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and suppliesCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently hiring a Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. Candidate requires sufficient electrical and mechanical knowledge and must pass online and hands-on assessment.Responsibilities and DutiesTroubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encodersInspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer platesInspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coilsInspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumpsWelding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of workPerforming preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $37.73 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Our Taneytown, MD Pump Manufacturing facility is over 150,000 square feet and provides capability for engineering, design, customer service, machining, assembly, and testing for a diverse product portfolio, which serves all markets (power, oil & gas, water resources, general industry, and chemical). The facility has expanded four times since opening in 1971 to accommodate revenue growth and product line developments. The entire project lifecycle is experienced all under the same roof. Role Summary: Flowserve is looking for a Machinist at our manufacturing facility in Taneytown, MD. The candidate should be proficient in the set-up and operation of manual lathes, with exposure to CNC. The ideal candidate will have extensive knowledge of the general manufacturing environment to include, able to work safely, able to machine tolerances +/- .001, precision tool grinding, the use of overhead jib cranes, ergonomics, and inspection equipment. This machinist position requires self-inspection of parts, able to use trigonometry to find dimensions, understanding of geometric tolerancing, and being able to work in a safe and efficient manner. 2nd shift: Mon - Thur 3:30 pm - 2:00 am - 5% Differential Responsibilities: Machinist with experience running castings on manual and CNC machines.Maintain clean and well-organized work area at all times while maintaining all tooling and machinery for efficient and safe operation.Accurately machine to within a +/- .001 tolerance and familiar with prints with geometric tolerances.Comfortable with all types of precision measuring equipment and working in English and Metric systems.Experienced with jib and overhead cranes lifting large castings.Understand and operate machines, tooling, and measuring equipment properly and safely.Adhere to all Safety Procedures & Policy. Complete all Pure Safety and other safety training as required. Requirements: 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Experience in using and interpreting precision measuring instruments, such as micrometers, dial indicators, and depth gaugesDemonstrated ability to read and interpret blueprints, geometric tolerances, and finishes during the application of machining.Ability to work in a team oriented and CIP environmentAbility to read and interpret instructions and drawingsAbility to follow complex verbal and written instructionsAble to stand for long periods, repetitive arm motions, frequent lifting with occasional lifting up to 50 lbs.Ability to work overtime as requiredHigh School Diploma or GED or 3-5 relevant years of experience in lieu of education Preferred: Machinist certification, training or degree related to machining is a plus.Experience in high mix, low volume manufacturing environmentForklift certification Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-9530 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

BRIEF DESCRIPTION:The Carpenter - Skilled Tradesman is an experienced and trainable laborer skilled in carpentry in multiple areas of residential and commercial rebuilding, with a demonstrated track record in insurance restoration work. Effective communication skills are essential during the reconstruction process. Carpenters reports directly to the Project Manager. Candidates are expected to possess a reliable truck and tools to execute tasks to a high standard.Hourly Pay Range is: $21.00 - $36.00PRINCIPAL DUTIES & RESPONSIBILITIES:General carpentry - residential and commercialDemolitionTile WorkHanging cabinetsTrim carpentry-baseboardsDoor hanging and tapingPaintingLight electrical/plumbingRough framing consisting of re-framing homes and setting trussesEnsure company and customer satisfaction through professional appearance, expert workmanship and polite communicationComply with safety, quality & procedural standardsSUPERVISORY RESPONSIBILITY:This position has no direct reportsQUALIFICATIONS & REQUIREMENTS:Direct experience working as a skilled carpenter is requiredKnowledge of carpentry and use of carpentry related hand and power toolsSelf-motivatedWork in confined areas (crawl space)Understand and follow oral and written instructionsCommunicate effectively in oral and written forms to execute required paperworkIdentify hazards in assigned work areasWork safely without presenting a direct threat to self or othersMeet the mental and physical demands of the jobAbility to work with people in a professional mannerMaintains a valid and current driver's license with a satisfactory driving recordSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningEDUCATION:High school diploma or GED equivalent requiredWORK ENVIRONMENT & PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.The employee must regularly lift and/or move between 25-50 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands and fingers to handle material,talk and hear. The employee is required to stoop, kneel, crouch, or occasionally crawl. The employee is occasionally required to sit.TRAVEL:Availability for travel in response to out-of-town projects and/or catastrophic events. Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive hourly wage and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, disability, IT equipment necessary to complete tasks (i.e. smartphone, tablet), and corporate apparel allowance.BluSky also offers extended benefits such as: Employee Assistance Program, Accident & Critical Illness Coverage, LegalShield, Professional Development, Paid Referral Program, Vendor Discounts, and more.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation or any other applicable status protected by Federal, State or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.**This Engineering role can be filled at Mid-level or Senior Engineer level.Please see minimum qualifications list below for each level**Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations while acting as a resource and technical expert to engineers. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.Provide technical expertise and consultation through direct involvement and as a subject matter expert when consulted to identify and resolve equipment and system problems.Directly fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Perform engineering tasks as assigned by supervision applying engineering principles.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Mid-level E02 EngineerB.S. in Mechanical Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Mechanical Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSProfessional Engineer RegistrationAdvanced technical degree or related coursework

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting Pay Paid TrainingGlobal Advancement Opportunities Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! What you will do:Under direct supervision, completes assigned programming, commissioning, basic troubleshooting, and preventive maintenance of fire systems per contract obligations.How you will do it:Assists experienced personnel with solutions to systems problems, either troubleshooting the system or advising others on how to resolve problems. Requires understanding of core and third-party fire products, software and systems / electrical technology.Assists in performing required commissioning documentation. Provide accurate information for as-builts documentation.Adheres to safety standards and local and national codes, with a high degree of regard to employee and subcontractor safety.Maintains appropriate local and National Fire Industry Certifications.Communicates with customer upon arrival and before leaving the work site. Continuous proactive customer interactions including an in-depth understanding of customer(s) needs wants and systems currently in place.Assists in monitoring project execution per plan. Reports problems or changes to supervisor or management.Completes paperwork and on-site documentation as required.Performs self-study (reading, research, and practice) to obtain technical proficiency on required products and application.Perform inspection of Fire and Fire/Smoke dampers meeting code and contract requirements.Perform Exit sign inspections meeting code and contract requirements.Performs other duties as assignedWhat we look for:Required:High school diploma plus five years' experience in installing or troubleshooting Fire systems recommended.Demonstration of effective troubleshooting skillsElectronics certification from accredited technical school or military electronics training desired.Demonstrated effective interpersonal skills to represent the company to customers and other outside contacts.Basic computer skills required.Attention to detail.Preferred Knowledge any of the following:Honeywell Notifier Fire Alarm (Certification Preferred)JCI Notifier Fire Alarm (Certification Preferred)Proven experience in the Installation and Service of the Notifier productJohnson Controls International plc. is an equal employment opportunity and affirmative actionemployerand all qualified applicants will receive consideration for employment without regard to race,color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please viewEEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visitwww.johnsoncontrols.com/careers.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow Responsibilities: The HVAC Journeyman is responsible for the installation of HVAC systems including the lay out of roof penetrations, ducting, and the layout of sheet metal fittings following customer specifications, applicable building codes, and proper piping practices.Provides support on HVAC construction jobs by reading and interpreting blueprints as needed by the foreman to ensure a timely and quality completion of the project.Provides the required laying out of the roof penetrations and ducting; and laying out of the sheet metal fittings as directed by the foreman.Assists the Construction foreman as needed on the job.Provides support by coordinating and following job schedules, i.e., labor hours, and material costs.Performs other related duties and projects as assigned by management Qualifications: High school diploma and trade or technical school classes3+ years of experience in the construction industry, and hands-on field experience in commercial HVAC construction and major market remodeling.Knowledge of UMC/SMACNA requirements.Knowledge of commercial HVAC construction products and tools.Knowledge of refrigeration equipmentKnowledge of blueprints, detailing HVAC duct fittings.Ability to grease duct weld and complete minor electrical installation.Ability to complete sheet metal layouts and fabrications, good mechanical skills.Knowledge of electrical systems and ability to wire installations.Knowledge of carpentry.Knowledge of refrigeration systems and piping of refrigeration equipment.Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to hang evaporation coils and install overhead hangers.Ability to use hand and power tools and good mechanical skills.Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance.Ability to work with minimal supervision. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P GlobalPOSITION SUMMARY: The Operator – Heavy Equipment is responsible for the safe operation of heavy equipment at a recycling center, landfill or transfer station for the purpose of transferring, spreading, covering, loading and/or compacting waste or soil in an efficient and safe manner.PRINCIPAL RESPONSIBILITIES:Perform pre- and post-operation inspection of the equipment in accordance with Company policy to ensure windows, lights, mirrors and rear view camera are clean. Safely and efficiently operate equipment that may include: forklift, excavator, bulldozer, front-end loader and other equipment using proper safety standards.Continuously monitor waste for evidence of unacceptable waste in materials.Continuously monitor the condition of the equipment to ensure it is operationally ready at all times to minimize down time; clean tracks or wheels on equipment, as needed.Perform and document minor service on equipment, referring more complicated mechanical issues to Maintenance Shop for repair.Complete Equipment Condition Report and other reports, as necessary; report any necessary repairs to supervisor, as needed.Follow all required safety policies and procedures.Ensure that shop is clean, serviced and stored at the completion of each shift.Perform other job-related duties as assigned.QUALIFICATIONS:Good customer services skills to meet and exceed customer expectations; acts in a professional, courteous and cooperative manner toward customers and co-workers; works with a sense of honesty and trustworthiness.Good time management skills to ensure assigned responsibilities are completed in an efficient and safe manner.Good follow through ability; ability to adhere to work schedule and follows through on challenges as they arise.Ability to adhere to Company policies and rules set forth; promotes the Company’s safety standards; does not take inappropriate risks.Maintains a feeling of pride in work; strives to achieve all goals.MINIMUM REQUIREMENTS:Two years of prior related experience in heavy equipment operation.One year of prior experience working at sites regulated by OSHA.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

R20425100889201 Bucky Drive, Lititz, Pennsylvania 17543T ruGreen accepts applications on an ongoing basis. Job Description Field Operations Every TruGreen associate is committed to quality. We all have an important role to play in the success of our company. There is no job too small or too great that doesn't equally impact our future.We know there is no business without the people behind our brand that make it - and our services - a reality. You play a critical role in contributing to a high-performing team.At TruGreen, we are committed to our customers, our teams, our values and the science of lawn care. A career with TruGreen is a career full of new opportunities to learn and take pride in your work.#BeTruGreen and find yourself with a satisfying and rewarding career.What's In it for YOU!A job that keeps it interesting-no two days are alike, and you get to work outside instead of inside a stuffy officeAwesome teammates who are dedicated to our values, customers, lawn science, and YOU!Competitive wages* Average income is $850 - $1,200/week (based on an hourly rate and average bonuses earned for qualifying specialists meeting performance expectations)Affordable medical and prescription drug plansFinancial health resources, including 401kTraining & DevelopmentPaid Time Off/Sick LeaveYour ResponsibilitiesYou are a TruGreen ambassador, responsible for creating positive relationships between our customers and our products. You help our customers live life outside.Responsibilities include:Administer timely lawn applicationsDiagnose and correct customer problems through service calls and other communicationsRecommend and sell products and service information to new and existing customers, resulting in growth of our customer baseComplete production reports, new sales forms, customer invoice forms, daily vehicle inspection report, and cancel/skip noticesNote: All positions require a valid driver's license, and some may require appropriate state/local licensingIncluded RolesLawn Specialists (Residential or Commercial)Tree & Shrub SpecialistAeratorLaborerWarehouse TechnicianAs America's number one lawn care company, TruGreen® is dedicated to using our science-based expertise and local experience to create beautiful, healthy properties across the nation. Through our lawn and tree & shrub services, we help improve the health and beauty of outdoor spaces everywhere, so people can Live Life Outside.Ability to speak, read and write fluently in English is required.You MUST BE physically located in the United States while performing this job.TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit https://trugreen.phenompro.com/us/en/eeoc-and-eeo-policy or to request an application accommodation, please visit https://trugreen.phenompro.com/us/en/disabilities-accommodationsCalifornia Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.TruGreen performs pre-employment testing.To view our disclaimer, https://trugreenjobs.com/us/en/disclaimer

Overview: Electro-Mechanical Technician| Hiring Immediately | Downingtown, PAAvailable Shift: 3:00 PM - 11:30 PMAPPLY ONLINE!Compensation:Starting pay rate $33.43 per hourAdd EXTRA money to your paycheck by referring friends & familyEligible for annual & skill-based wage increasesBenefits Include:Multiple medical and prescription drug coverage optionsChoice of an Employer-Funded Health Care Account (HCA) or Health Savings Account (HSA)Integrated healthcare programs – telemedicine, chronic condition, weight management and msk healthMultiple dental and vision plan coverage optionsFlexible spending accounts (FSA)Healthcare, dependent care Company provided life and accidental death, short and long-term disability programsSupplemental life, accidental death, and disability buy-up optionsAccident, critical illness, and hospital indemnity insuranceEmployee well-being reward programEmployee assistance program (EAP)Child and family care support programEducational assistance and tuition reimbursement programEmployee discount program401(K) with company match (Eligible to participate from day one (1) with 100% vesting in all company provided money immediately)Our Social Responsibility platform features a robust, employee-led Give Back program, which includes a matching gifts plan, community grants initiative, and our annual Company-wide Month of Action campaign. With each of these initiatives, our employees are empowered and equipped to give back to their communities and support the non-profits important to them and their families. Through our Give Back program, we own our commitment to Social Responsibility and live our purpose of Packaging a Better Future. Responsibilities: Responsibilities:The Electro-Mechanic is a skilled position that is responsible for and requires specialized training in electrical design, installation, troubleshooting, maintenance and repair work. Must have & be able to maintain proven leadership skills and meet company expectations of same including maintaining exemplary attendance record.Performs work requiring a thorough knowledge of electrical theory and principles, NEC, properties of materials and principles of operations of electrical equipment. Starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements.Ability to utilize electrical test equipment and ability to isolate defects in wiring, switches, motors and other electrical equipment.Services electronic equipment by checking, testing and replacing faulty components, circuits, printed circuit boards and similar electronic devices.Knowledge of low & high voltage electrical systems and basic wiring principles.Ability to measure, cut, thread, pull and install electrical conduit. Ability to use hand and power tools applicable to the trade. Installs conduits, transformers, pull boxes and switches. Services and repairs starters, motors and various other types of electrical equipment and apparatus.Fabricates parts not commercially available, using machine and hand tools common to the trade.Determines need for, analyzes and makes necessary running adjustments, repairs and overhauls.Troubleshoots and repairs electric controls, motor control centers and programmable logic controls. Proven comprehension and abilities to program, troubleshoot and maintain Programmable Logic Controllers (PLC).Installs and repairs electrical equipment, designs electrical controls circuits and installs electrical wiring. Draws electrical & electronic equipment.Identifies equipment and material needs for projects. Reads and interprets blueprints and schematics.Coordinates on all project needs with Maintenance & Production Supervisors/Managers.Proven leadership abilities to effectively communicate orally and in written form to Management, employees and contractors. Provide leadership to all employees in compliance with all safety programs.Knowledge of electrical terms, materials, methods, tools and equipment used in the inspection repair, installation, service and maintenance of electrical systems. Applicable code sections related to this field (i.e., National Electrical Code of the Industrial Accident Commission). Principles of electrical theory including amperage/voltage load requirements and calculations. Working from blueprints, sketches and shop drawings. Interface with service personnel and contractors to ensure quality workmanship.Assist (as required) in the training & skill up grading of other maintenance personnel as well as production associates (machine operators) etc.Must continually demonstrate proficiency in the job skill level of this position in accordance with the requirements of the job description.Participates in all plant emergencies as required and maintains any certification/training as deemed necessary or required by management in order to be able to respond to any specific plant emergencies.Must be willing to participate in and successfully complete any job related educational courses, training/testing programs, etc. as deemed necessary or required in order to upgrade the position skill level in order to advance to another job level.Performs additional duties of a similar nature and level of responsibility as might be required. Qualifications: Qualifications:Five years journey level industrial experience (installing, maintaining & repairing industrial equipment)Able to read blueprints/schematics, determine and correct causes of equipment failureExperienced at performing precision equipment alignmentsWorking knowledge of fabrication, installation & maintenance of production and support equipment (e.g. Arc welders, oxy-acetylene torches, saws, drills, grinders, pumps, engines)Must maintain non-disciplinary status with regard to job performance and attendance recordAbility to accept position responsibility and empowerment and be able to efficiently perform the functions of this job with minimal supervision requiredMust satisfactorily meet testing/training requirementsPactiv Evergreen Inc.(NASDAQ: PTVE) is a leading manufacturer and distributor of fresh foodservice and food merchandising products and fresh beverage cartons in North America and certain international markets. It supplies its products to a broad and diversified mix of companies, including full service restaurants and quick service restaurants, foodservice distributors, supermarkets, grocery and healthy eating retailers, other food stores, food and beverage producers, food packers and food processors. To learn more about the company, please go to the company website at pactivevergreen.com.Downingtown is a borough in Chester County, Pennsylvania, 33 miles west of Philadelphia. As of the 2010 census it had a population of 7,891. Downingtown was settled by English and European colonists in the early 18th century and has a number of historic buildings and structures. The plant was built in 1979, manufactures paper cups and cartons, and has approximately 200 employees. Pactiv Evergreen is one of the largest manufacturers of fresh food & beverage packaging in North America, with market leading positions across a broad range of products. We bring our Purpose of Packaging a Better Future to life by producing and distributing high-quality products – many made with recyclable or renewable materials – to food and beverage manufacturers, packers and processors, supermarkets, restaurants, foodservice outlets and other institutions. To learn more, please visit our website at pactivevergreen.com.All information will be kept confidential according to EEO guidelines and applicable laws. Pactiv Evergreen employees are subject to post-hire drug and alcohol testing in accordance with company policies

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.Expected salary range of $123,300 to $137,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of Power plant operations while acting as a resource and technical expert to engineers. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.Provide technical expertise and consultation through direct involvement and as a subject matter expert when consulted to identify and resolve equipment and system problems.Directly fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Perform engineering tasks as assigned by supervision applying engineering principles.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSBS Engineering, and 7+ years professional experience.Has completed assigned skills and knowledge development training (applicable Advanced Engineering, EPRI, and Constellation University training or industry provided training) to develop expert level of knowledge in designated areas. PREFERRED QUALIFICATIONSGas turbine experienceDCS/PLC controls experienceDemonstrated ability to mentor other engineers in key knowledge and skills. Demonstrated proficiency leading cross functional initiatives at an asset/plant

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow Responsibilities: This position is responsible for the installation of refrigeration systems following customer specifications, applicable building codes, and proper piping practices.Provide support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project.Provides the required installation of pipe hangers as directed by the foreman.Provide construction support by welding and slip-hosing copper pipes, and assist the foreman as needed on the job.Provide support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems.Perform other duties and projects as assigned. Qualifications: High school diploma or GED equivalent work experience and trade or technical school classes3+ years of experience in the construction industry preferred and hands-on field experience in commercial refrigeration, electrical and/or fixtures constructionEPA Certification (Type II)Experience in copper brazing, market remodelingGood driving record.Knowledge of electrical systems and ability to wire installations.Knowledge of carpentry.Knowledge of refrigeration systems and piping of refrigeration equipment.Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to hang evaporation coils and install overhead hangers.Ability to use hand and power tools and good mechanical skills.Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance.Ability to work with minimal supervision. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sicktime -15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care -Available day oneExtensive product and on the job/cross training opportunitiesWith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out: A Day in a Life at Johnson Controls:The Mechanical Engineer on the centrifugal compressor team will be engaged in both sustaining and new development product engineering activities, including technology roadmap projects. Sustaining activities include Value Analysis/Value Engineering, assisting product technical support, manufacturing personnel (Factory), and other compressor & chiller engineers in the business unit globally. VA/VE is a technique used to deliver high product/service value to customers by reducing cost and/or improving functionality without compromising on quality. New product introduction (NPI) assignments will include new compressor and/or component design and coordination of prototype design and build activities.What you will doExecute VA/VE projects as defined by the chiller and compressor engineering teams. Revise components, assemblies and/or processes as needed to improve compressor efficiency and/or reduce cost. Based on requirements supplied by product management and chiller engineering, design new centrifugal compressors. Interface with aero and other compressor engineers as needed to facilitate this work. Collaborate with designers to revise/update existing drawings and bill of material (BOM) to implement quality or VA/VE improvements or to create new drawings and BOM’s for NPI projects. Be the compressor representative assigned to an 8D team or other formal quality process for centrifugal products when customer issues are identified.How will you do itExecute improvement projects for quality, cost, performance, and reliability of existing centrifugal products.Collaborate with other compressor and aero engineers to design new centrifugal compressors.Work with designers in the creation of drawings and BOM’s to implement product improvements or to support the release of new centrifugal designs.Review and approve drawings prior to release for manufacturing.Lead/participate in formal problem-solving activities.Be a resource for other compressor engineers in support of their VA/VE projects.Assist product technical support, quality, manufacturing, compressor build room technicians, and other compressor engineers as needed to help resolve field issues.Coordinate agency approval activities (UL, etc.) for compressor engineering.What we look forTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.Minimum BS degree in Mechanical Engineering and 1+ years of professional experience.Practical experience with high-speed rotating equipment desired.Familiarity with commercial HVAC equipment preferred.Knowledge of quality engineering processes such as 8D.Ability to read and understand mechanical component and assembly drawings.Understanding of material properties and machining processes for steel and aluminum.High mechanical aptitude.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.Expected salary range of $120,600 to $134,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONDirectly responsible in supervising, developing, and coaching the assigned Electrical and Instrumentation planners. Responsible for assigning, coordinating and execution of daily work activities to ensure a productive workforce that supports all Electrical and Instrumentation Maintenance Planning goals in accordance with the QA Manual, company policies, and local, state and federal regulations. Provide supervisory oversight for planning of work packages for work to be performed by the respective Electrical and Instrumentation Maintenance departments. Ensures packages are planned in accordance with plant procedures with the highest quality, ultimately ensuring the plant is maintained in a safe and reliable condition. Provide analysis and assist in developing recommendations to the Electrical and Instrumentation Maintenance Planning Manager to allow strategic decisions for improvement of the work planning process. The Supervisor Maintenance Planning, when not performing the supervisor role will plan packages (as applicable based on site). The Supervisor Maintenance Planning will also function as a backup to the Manager Maintenance Planning in their absence.PRIMARY DUTIES AND ACCOUNTABILITIESSupervises Electrical and Instrumentation Maintenance Planners for scheduled and emergent work for both On-line and Outage conditions. Ensure that all assigned activities are performed effectively and efficiently in accordance with plant procedures and local, state and federal regulations. Inputs to performance reviews for assigned planners. Provide development opportunities and coaching for responsible planners to drive individual and department improvement. Interface with Work Management, Supply, and Engineering to identify and resolve work package issues.Input to the Electrical and Instrumentation Maintenance Planning Manager improvement areas, perform internal trending of performance of responsible planners, perform required CAP products and provide coaching / counselling to respective planners when required.Review work packages for quality and readiness as required. Verify work instructions are adequate and comply with all applicable station procedures including NSP's, NSWP's, ASMR Code, etc. Review and approve all required work packages, including 10.CFR50.59 screening or evaluation (if required).Prepare / Revise work instructions as required that provide direction to the Electrical and Instrumentation Maintenance Department for maintenance repairs, performance of preventive maintenance and surveillances, and the implementation of modifications. (As applicable based on site)Fill in for Manager Maintenance Planning in their absenceMINIMUM QUALIFICATIONS4 years' experience in the craft he/she supervises and plansAt least three years of experience must be in a planning function to support the E-0 duty requirement.Must have completed a positive Leadership Assessment (FLS)Excellent communication skills.Excellent computer skills.Excellent problem solving, decision-making and planning skills.Demonstrated strong leadership potential and accountability. PREFERRED QUALIFICATIONSFour-year technical degreePrevious Corrective Action I Root Cause Analysis Training2-year technical degree with 8 years utility or related industry experience

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow Responsibilities: This position is responsible for the installation of refrigeration systems following customer specifications, applicable building codes, and proper piping practices.Provide support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project.Provides the required installation of pipe hangers as directed by the foreman.Provide construction support by welding and slip-hosing copper pipes, and assist the foreman as needed on the job.Provide support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems.Perform other duties and projects as assigned. Qualifications: High school diploma or GED equivalent work experience and trade or technical school classes3+ years of experience in the construction industry preferred and hands-on field experience in commercial refrigeration, electrical and/or fixtures constructionEPA Certification (Type II)Experience in copper brazing, market remodelingGood driving record.Knowledge of electrical systems and ability to wire installations.Knowledge of carpentry.Knowledge of refrigeration systems and piping of refrigeration equipment.Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to hang evaporation coils and install overhead hangers.Ability to use hand and power tools and good mechanical skills.Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance.Ability to work with minimal supervision. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

What you will do Johnson Controls is seeking an experienced Software Engineering Manager to lead a team of engineers in the development of embedded control and user experience equipment for our Data Center HVAC equipment. This role requires a background in software engineering, Agile methodologies, and equipment controls. The engineering manager and their team will focus on HVAC equipment and applications within data centers environments. The ideal candidate will have a passion for leadership, innovation, and delivering high-quality solutions. This position will be onsite located in our New Freedom, PA, JADEC facility. Candidates must be commutable distance, or able/willing to relocate.As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offer Competitive salary.Paid vacation/holidays/sick time.Comprehensive benefits package including 401K, medical, dental, and vision care– available day one!Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Opportunities to work on innovative projects in a fast-growing industry.Professional growth and career advancement opportunities.How you will do it Lead, mentor, and manage a global team of embedded software, controls, and test engineers.Foster a culture of collaboration, innovation, and continuous improvement.Conduct regular performance evaluations and provide coaching and professional development opportunities.Manage the full development lifecycle for products, from planning to deployment.Create and deploy an Agile methodologies process to plan, execute, and monitor projects, ensuring timely delivery.Maintain standard workflow processes to manage workload within the team. Ensure transparency of process and performance.Collaborate with global engineering teams on technology and best practices.Ensure the implementation of best practices and industry standards in engineering development.Engage with internal and external stakeholders to gather requirements and define project objectives.Communicate project status, risks, and outcomes to senior management and other key stakeholders.Develop technology roadmaps and perform technology reviews with contributions from the global team.Establish and maintain rigorous testing and validation processes to ensure software reliability and performance.Initiate continuous improvement to reduce cycle time and increase product quality and performance.Stay current with advancements in embedded systems, HVAC technology, and data center requirements.What we look forRequired Bachelor’s or Master’s degree in Computer Science, Computer Engineering, Electrical Engineering, or a related field.Minimum of 8+ years of experience in embedded software development.Extensive knowledge and experience with Agile methodologies.2+ years of leadership or managerial experience, preferably managing a team of 8-10 software engineers.Strong planning and forecasting skills. Ability to lead a team with a high degree of integrity and trust.The ability to work on multiple simultaneous programs that support strategic JCI initiatives.PreferredExperience with HVAC systems and data center environments.Knowledge of secure software development best practices.Experience with Linux based systems.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow Responsibilities: This position is responsible for the installation of refrigeration systems following customer specifications, applicable building codes, and proper piping practices.Provide support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project.Provides the required installation of pipe hangers as directed by the foreman.Provide construction support by welding and slip-hosing copper pipes, and assist the foreman as needed on the job.Provide support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems.Perform other duties and projects as assigned. Qualifications: High school diploma or GED equivalent work experience and trade or technical school classes3+ years of experience in the construction industry preferred and hands-on field experience in commercial refrigeration, electrical and/or fixtures constructionEPA Certification (Type II)Experience in copper brazing, market remodelingGood driving record.Knowledge of electrical systems and ability to wire installations.Knowledge of carpentry.Knowledge of refrigeration systems and piping of refrigeration equipment.Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to hang evaporation coils and install overhead hangers.Ability to use hand and power tools and good mechanical skills.Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance.Ability to work with minimal supervision. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more. PRIMARY PURPOSE OF POSITIONPerforms advanced engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses superior knowledge in functional discipline and its practical application and has excellent knowledge of applicable industry codes and regulations. Functions with recognized industry-level of expertise in a technical area.PRIMARY DUTIES AND ACCOUNTABILITIESPerform advanced engineering and technical tasks in support of nuclear plant operations.Perform independent research, reviews, studies and analyses in support of technical projects.Provides in-depth technical expertise to develop, manage and implement engineering activities related to plant safety, reliability, maintainability, and availability ensuring compliance to customer's needs, regulatory requirements, and corporate policies.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices and codes are used in preparation of plans and specifications.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provides initial or complete task management of engineering issues.Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.Supports plant design modifications, testing and problem solving.Assure all engineering products prepared or overseen are in accordance with applicable safety analyses, industry codes, and all regulatory requirements.Develop, implement and coordinate functional supervisory activities including, but not limited to, personnel, budgetary accountabilities and planning goals with respect to engineering personnel.*This Engineering role can be filled at Mid, Senior or Senior Staff Engineer levels. Please see minimum qualifications list below for each level*Expected salary range:Mid-level: $ 88,000 - 108,000Senior Level: $ 115,000 - 141,000Senior Staff Level: $ 138,000 - 154,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.MINIMUM QUALIFICATIONS for Mid-level EngineerB.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior EngineerB.S. in Engineering or Licensed Professional Engineer and 7+ years engineering experienceMINIMUM QUALIFICATIONS for Senior Staff EngineerB.S. in Engineering or Licensed Professional Engineer and 10+ years engineering experience PREFERRED QUALIFICATIONSSteam Turbine exerience required. preferablly a focus on turbine field engineering and maintenance support, and troubleshooting. Experience with turbine overhauls, inspections, long term assett management, professional engineering registration is a benefit but not required, and advanced technical degree or coursework is beneficial.

What you will doThe Test Engineer will “manage” a test throughout the process from test design and planning through execution to completion including preliminary analysis of data results. This individual possesses a working knowledge of HVAC/R equipment and its application. This individual has experience with component or system testing, test procedure development, and mechanical fluid or airflow system design, troubleshooting or operation. They are required to singularly manage the testing process for individual test subjects in order to successfully and efficiently complete testing within the product area. They will conceive, develop, and evaluate plans for solving complex testing challenges. An advanced level team contributor with strong technical expertise in HVAC who will assist in training of personnel in the laboratory as well as defining and supporting the implementation of operational improvement of testing.How you will do it Provide technical communications for test engineering to project customer(s).Plan and execute tests of chillers and components. This may include:- Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.- Significant track record as lead project management over successful mechanical HVAC/R installations- Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.- Meet with product engineering, product management, product technical support or equivalent groups to agree upon and issue test plans.- Work within the test engineering team to schedule tests and required resources.- Provide oversight and input to test technicians for set up of data acquisition software configurations.- Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.- Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive, and participate with creation, of standard procedures, test standards and processes.Works independently with minimal direction. Independently develops approach to solutions.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, or advanced testing services.What we look for BS requiredA minimum combination of seven (7) years direct work experience in the following: HVAC/R equipment development, servicing or testing, with a good understanding of HVAC/R systems, concepts, and diagnostics.Desired background in engineering and development testing, with use of a variety of test instrumentation to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Works under minimal supervision. Ownership of assignments, which are carried out collaboratively within lab team and customer groups. Spear-heads process initiatives within department.High level of product family competency. Recognized expert in one or more technical and operational disciplines within HVAC platform development. Experienced in environments ranging from laboratory to manufacturing/testing facilities to field sites.Able to work in fast-paced, schedule driven work environment. Possess the agility/adaptability to quickly move from one task to another when required.Strong people management & communication skills; willing to confront issues in an open, but tactful wayStrong organization and problem-solving experienceAbility to guide or mentor less experienced technical personnel within teamStrong group communication skills, presentation skillsDemonstrated strong financial and analytical skills (desired)Excellent computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail#LI-SI1#LI-OnsiteJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow Responsibilities: This position is responsible for the installation of refrigeration systems following customer specifications, applicable building codes, and proper piping practices.Provide support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project.Provides the required installation of pipe hangers as directed by the foreman.Provide construction support by welding and slip-hosing copper pipes, and assist the foreman as needed on the job.Provide support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems.Perform other duties and projects as assigned. Qualifications: High school diploma or GED equivalent work experience and trade or technical school classes3+ years of experience in the construction industry preferred and hands-on field experience in commercial refrigeration, electrical and/or fixtures constructionEPA Certification (Type II)Experience in copper brazing, market remodelingGood driving record.Knowledge of electrical systems and ability to wire installations.Knowledge of carpentry.Knowledge of refrigeration systems and piping of refrigeration equipment.Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to hang evaporation coils and install overhead hangers.Ability to use hand and power tools and good mechanical skills.Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance.Ability to work with minimal supervision. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.