We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Company:US3063 Sygma Pennsylvania (The Sygma Network, Inc)Sales Territory:NoneZip Code:17110Travel Percentage:0COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factorsJOB SUMMARYTo provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability.MONDAY TO FRIDAY 11:00PM TO 7:30AM$27.00 TO $35.00 PER HOUR BASED ON EXPERIENCE$600 ANNUAL TOOL ALLOWANCERESPONSIBILITIESPerform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.Perform FAI/CVI (First Article Inspection/Commercial Vehicle Inspection) (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment by all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment.Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer).Address all Driver Vehicle Inspection Report write ups timely, and efficiently.Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.Follow procedures including documenting all work performed on work orders.Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility.May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible.Proficient in electrical meter testingKnowledge of controls and electric (DC low voltage)Electric motor knowledge (DC)Complete electrical repairs and welding projects as needed.QUALIFICATIONSEducationMedium/Heavy Duty truck technical training 2-year schoolHigh school diploma or GED requiredExperience4 years of experience OR5 years of experience in fleet maintenance and repairCurrent and valid driver’s license (CDL Preferred, Not Required)Professional SkillsAnnual Inspector Certification Knowledge, Skills and AbilitiesBrake Inspector Certification Knowledge, Skills and AbilitiesASE certifications – Automotive or Medium/Heavy Duty Trucks (preferred not required)EPA section 608 (Core & Type II) and 609 HVAC – Refrigeration CertificationWorking knowledge of computer-based diagnostic software for OEM’s and component manufacturersExpert knowledge and skill of all vehicle systems and componentsExpert knowledge and skill in diagnosis and repair of electrical systems on all equipmentExpert knowledge and skill in diagnosis and repair of refrigeration systems (Expert knowledge and skill in Preventive Maintenance Inspections and repairModerate knowledge and skill in welding and cutting (gas, electric, MIG, TIG)Moderate computer skills and knowledgeExpert knowledge of all DOT (FMCSA) regulationsModerate knowledge of OSHA safety regulationsModerate knowledge of environmental regulationsPhysical DemandsRegularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear.Frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.Occasionally required to sit and must frequently lift and/or move up to 100 lbs.Requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.Ability to operate various pieces of equipmentAbility to stand, sit, walk, bend, reachAbility to push/pullAbility to lift /carryAbility to grasp toolsAbility to perform Repetitive motion: wrenches and hand toolsWorking conditions: Frequently works outdoors.Work EnvironmentOccasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.Works non-traditional business hours including evenings, nights, weekends, holidays and on-call.Occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).Occasionally exposed to high, precarious places and confined spaces.Occasionally exposed to fumes or airborne particles.The noise level in the work environment is usually moderate.BENEFITS INFORMATION:For information on Sysco’s Benefits, please visit https://SyscoBenefits.comOVERVIEW:Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations.We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service.AFFIRMATIVE ACTION STATEMENT:Applicants must be currently authorized to work in the United States.We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law.This opportunityis available through Sysco Corporation, its subsidiaries and affiliates.

POSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.o 4:00am Start o $29/hrRewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P Global

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Competitive pay from $25 - $35 depending on experience.Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as a HVAC and Refrigeration TechnicianRack experience a plusExperience servicing kitchen hot side equipment and ice machines preferred.Active EPA Universal CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationJob SummaryResponsible for serving as support to the Asset Protection Supervisor to maintain workflow and count processes. Operating a forklift and working in tandem with all Inventory control team members to provide exceptional member shopping experience by conducting, organizing, and validating inventory counts, sorting damaged and RTV, reducing salvage, obtaining return authorizations from vendors and re-wrapping sellable merchandise. Works cross functionally within departments to complete related merchandise counts and inventory control responsibilities. Team Members:Carry out job functions and responsibilities as assigned. Support the application of club policies, procedures, and compliance. We strive for flawless execution and hold ourselves accountable.Acts with honesty and integrity and lead with the member in mind to address all concerns and to escalate any concerns, as appropriate.Ensure a safe and positive environment for our members and each other.Embrace inclusion and diversity, by working together with collaboration and respect. Work as a team to achieve goals. Move with speed and agility in everything we do. Innovate and adapt so we can move as fast as the world around us. Maintain a friendly and positive attitude. Members:Deliver service excellence through all points of contact.Resolve and deescalate to address every member concern. Ensure a safe and positive environment and experience for the members. Daily commitment to GOLD Member StandardsGreet, Anticipate, Appreciate (GAA)Fast, Friendly Full, Fresh, CleanClub Standards: Work as a team to deliver GOLD club standards daily. Work with commitment and pride to deliver GOLD- Grand opening look dailyAll items stocked and promotional plans executedMaintain visible accurate signageClean and organized, inside and outKnow your Business:Understand how to access and read production and/or financial performance reporting for your departmentSee the connection between consistent execution and the positive impact it can have on the businessMajor Tasks, Responsibilities, and Key AccountabilitiesProvides members with prompt and courteous service and assistance. Maintains high standards of safety, service, and sanitation for members and team members. Works with speed and accuracy to facilitate organized processes. Accurately processes damaged or defective merchandise by following appropriate salvage, donation, vendor return, reverse logistic, hazardous waste and destroy procedures. Obtains return authorizations from vendors, processes vendor chargebacks, and packages and ships merchandise returns based on vendor return policies. Works proactively with department teams to track, plan, coordinate and execute department inventory counts control county cycles as prescribed by Home Office within assigned deadlines.Follow count processes and procedures. Maintains the correct stock / inventory status for all damaged, defective, and returned merchandise. Assesses breakage logs associated with leaking, spoiled and broken merchandise and processes merchandise out of inventory. Processes freezer and dairy damages. Understands the company’s community / donation programs and administers salvage and donation merchandise orders. Conduct daily club safety walks, escalate findings to Asset Control Inventory SupervisorSupports Inventory Control Count Team in executing count processing as assigned.Review daily return reports, processes merchandise recalls, and processes tire and battery returns. Ensures that the AFS and release dates are followed. Ensures that the books are stocked, and that the execution of book returns are completed in partnership with the RICS. Processes the 945/948/950’s in partnership with the AP SpecialistRe-wraps sellable merchandise using appropriate seal and shrink-wrap packaging guidelines. Ensures the department is organized and clean. Follows established safety, filing organization, and lock-up standards. Completes and maintains necessary training and annual safety re-certifications to effectively operate a forkliftMaintains all club policies and procedures. Performs other duties as assigned, including working in other departments as needed. Regular, predictable, full attendance is an essential function of this job. QualificationsMust successfully complete required training and certification processes. Effective communication, interpersonal, and computer skills. Forklift experience preferred. At least 18 years of age. Environmental Job ConditionsMost of the time is spent moving about on hard surfaces. Frequently requires bending, climbing, crawling, pulling, reaching, stooping, and climbing ladders/step stools. Frequently requires lifting objects up to 30 pounds. May require lifting and moving heavy and/or awkward objects more than 30 pounds with assistance. Requires using a pallet jack to pull and push pallets. Exposure to both indoor and outdoor temperatures, as well as occasional exposure to extreme temperatures in freezers and coolers. Frequent exposure to hazardous material. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $15.75.

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is seeking an Automation MaintenanceTechnician at all levels. As a Maintenance Technician you will be responsible forrepairing and calibrating our automated and robotic systems. These systems are Symbotic’sautomated adapters, vertical lifts, and Symbotic’s fleet of automated robotic vehicles.You will be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure.As the Maintenance Technician you will become the system expert including all mechanical, PLC, electrical or electronic subsystems.What we doOur Automation Maintenance Technician team is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.What you’ll doPerform inspections on systems associated with Automated Storage and Retrieval System of automated robotic vehicles and Automated Adapters/ Lifts.Lead continuous operation by adjusting, calibrating, repairing, replacing or modifying system components.Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.Troubleshoot automated robotic vehicle anomalies and stoppages using schematic and wiring diagrams as well as advanced test equipment.Perform periodic system inspections within expected durations on all equipment and thoroughly document all actions and repairs to include parts used and labor. Ensure quality maintenance and complete documentation via the Computerized Maintenance Management System (CMMS).Effective communication of production impacting problems and suggested actions, including approximate time required for corrective and emergency maintenance to required team members.Must be able to work in a dynamic environment and change course based on immediate business needs.Cleanup of equipment and removal of replaced parts from work areas after repairs are completed.Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.Responsible for minor utility work such as machining holes, brackets; cutting steel; aligning sensors; attaching Unistrut; etc.).Responsible for troubleshooting, calibration, set up, and tool changes on Robotic arms.Responsible for continuous cleaning and adhering to 5S policies.Perform Cell Operator functions as needed.Other duties as assigned by leadership.What you’ll needAssociate degree and/or certification in electronics, automotive, automation, manufacturing or equivalent work experience preferred.A minimum of 3 years of experience with mechanical automation systems or educational/training equivalentManage and lead advanced troubleshooting skills and ability to follow electro-mechanical diagrams.Must be able to operate and run Automated systemsExperience with PLC (Programmable Logic Controller) knowledge and troubleshooting.Advanced troubleshooting skills and ability to follow electro-mechanical diagrams.Proficient in performing all Inspection functions.Ability to work independently of supervisor following procedures and manuals.Our EnvironmentThere will be steep stairs to climb into the structure.You will regularly be near railings that are high off the ground.Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.If the site location is in construction, you will be required to wear proper PPE (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness).Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms.The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. to stand; climb or balance and stoop, kneel, crouch, or crawl.Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols.#LI-DM1#LI-OnsiteAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Job Summary: Operate and maintain press to production standards and quality. Set-up, adjust and operate equipment to print and fold signatures, ensuring expectations of customer specifications. Duties/Responsibilities: Review job jackets and plan work process to ensure meeting of customer specifications Monitor assigned press machine during run to ensure adherence to specificationsPerforming quick and efficient make-readies, product size changeover and folder changeoversPerform preventative maintenance and troubleshoot machine problems, resolving if possible, notifying GPS or Print Process Manager as neededProvide training, as required, to Assistant in machine operation and safetyComplete and maintain all required paperwork, job jackets, records, documents, timekeeping, etc. Follow all required safety procedures such as: PPE’s, Ergonomics, and etc. Performs job in a manner that protects the health and safety of all employees. Assist with housekeeping in the Press areaOther duties as assigned Basic Qualifications: High School Diploma or GEDStrong math and mechanical skills.Ability to effectively communicate with other employees Desired Skills and Abilities: Previous Press experience is preferredKnowledge of a variety of small hand tools and precision measuring devices is preferred Physical Requirements Ability to frequently transport and position materials weighing up to 65 pounds CJK Group is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. #SPA24

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesInstalls intrusion, fire, CCTV, and access control security systems.Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs.Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements.Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment.Conducts tests to ensure all newly installed systems and component devices are operational.Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements.Presents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requestedMinimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredNICET Certification preferredIP Video and IT experience preferredClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits including:Opportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

The pay range per hour is $36.50 - $40.50Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Job DescriptionEngineering & Facilities (MT2)About job:Tuition ReimbursementBenefits eligible within two weeks of employmentCurrently hiring for below shifts:L2 Key - Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential)L3 Key - Wednesday - Saturday from 10:00pm - 8:00am ($2.50 shift differential) About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

*Wednesday-Saturday 8pm-6am *About the RoleAs a Maintenance Technician, you will promote workplace efficiency and profitability by maintaining, inspecting and repairing facilities, equipment and machinery. What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, generators, compactors, bailers, conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilitySort, stack and load pallets, cardboard, aluminum, steel and light bulbs for recyclingAssist outside contractors in performing various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning and disinfecting solutions, oil and equipment according to MSDS procedurePay Range: $24.20 - $38.70Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $35 - $45 hourly depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: ResponsibilitiesThe HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: Qualifications5+ years of commercial experience as an HVAC and Refrigeration TechnicianRack experience a plusEMS Controller experienceActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationIn accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is $15.50-19.38Job SummaryResponsible for assisting members in the selection and purchase of tires, properly installing and repairing tires, completing necessary tire bay documentation, and maintaining tire bay policies and procedures. Team Members:Carry out job functions and responsibilities as assigned. Support the application of club policies, procedures and compliance. We strive for flawless execution and hold ourselves accountable .Acts with honesty and integrity and lead with the member in mind to address any and all concerns and to escalate any concerns, as appropriate.Ensure a safe and positive environment for our members and each other.Embrace inclusion and diversity, by working together with collaboration and respect. Work as a team to achieve goals. Move with speed and agility in everything we do. Innovate and adapt so we can move as fast as the world around us. Maintain a friendly and positive attitude. Members:Deliver service excellence through all points of contact.Resolve and deescalate to address every member concern. Ensure a safe and positive environment and experience for the members. Daily commitment to GOLD Member StandardsGreet, Anticipate, Appreciate (GAA)Fast, Friendly Full, Fresh, CleanClub Standards: Work as a team to deliver GOLD club standards daily. Work with commitment and pride to deliver GOLD- Grand opening look dailyAll items stocked and promotional plans executedMaintain visible accurate signageClean and organized, inside and outKnow your Business:Understand how to access and read production and/or financial performance reporting for your departmentSee the connection between consistent execution and the positive impact it can have on the businessMajor Tasks, Responsibilities, and Key AccountabilitiesResponsible for the proper installation of tires, including mounting, dismounting, rotating, and balancing tires.Responsible for properly disposing of tires and ensuring propane tanks are filled per club policy. Maintains a clean and professional tire bay and waiting area. Merchandises tire displays and automotive products. Ensures that knowledgeable service is provided to members at the tire desk. Coordinates with Home Office regarding member tire needs as needed. Maintains an accurate and complete supply inventory. Understands and appropriately utilizes available special-order tire programs. Complies with safety and cleanliness standards and properly utilizes tire bay equipment. Assists members in the selection and purchase of tires including verifying the sizes for vehicles. Fills propane tanks as needed if certified per DOT requirements. Provides knowledgeable service to members at the tire desk. Understands and appropriately utilizes available special order tire programs. Ensures that all tire bay scheduling data and documentation is completed for sales and service orders. Maintains all club policies and procedures. Performs other duties as assigned, including working in other departments as needed. Regular, predictable, full attendance is an essential function of this job. QualificationsMust be at least 18 years of age. Valid driver’s license and ability to drive automatic and manual transmission vehicles required. Strong interpersonal skills required. Basic computer skills or a willingness to learn basic computer skills required. Prior tire installation experience preferred. Must pass Michelin training levels one through four within three months of hire. Ability to lift over 30 pounds with assistance. Environmental Job ConditionsExposure to both indoor and outdoor temperatures and weather conditions. Most of the time is spent standing and moving about continuously on hard surfaces. Frequent need to bend, climb, crawl, kneel, push, pull, reach, move side to side, stoop, and climb ladders/step stools.Frequently requires lifting objects up to 30 pounds. May require lifting and moving heavy and/or awkward objects more than 30 pounds with assistance. Usually perform job surrounded by moving cars, machinery and/or loud equipment that may require shouting to be heard. There may be occasional exposure to company approved chemicals and cleaning agents, and strong smells.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$25-$45 per hour DOE. Sign on Bonus: up to $3,000.00 DOEOngoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.