We are looking for an experienced Traffic Control Technician to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer Growth Potential
Qualifications: Valid Driver’s License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, gender, national origin, disability, or veteran status.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: MARKET LEADING PAY, PLUS BONUSESElite Acurais part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Automotive Service Technicians/Mechanicsto join our team!Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees. We offer...Market Leading Pay, based on experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanYou needAutomotive technician or mechanic experienceA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$29-$48 per hour DOE. Ongoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for the installation of refrigeration systems following customer specifications, applicable building codes, and proper piping practices.Provide support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project.Provides the required installation of pipe hangers as directed by the foreman.Provide construction support by welding and slip-hosing copper pipes, and assist the foreman as needed on the job.Provide support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems.Perform other duties and projects as assigned. Qualifications: High school diploma or GED equivalent work experience and trade or technical school classes5+ years of experience in the construction industry preferred and hands-on field experience in commercial refrigeration, electrical and/or fixtures constructionEPA Certification (Type II)Experience in copper brazing, market remodelingGood driving record.Knowledge of electrical systems and ability to wire installations.Knowledge of carpentry.Knowledge of refrigeration systems and piping of refrigeration equipment.Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to hang evaporation coils and install overhead hangers.Ability to use hand and power tools and good mechanical skills.Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance.Ability to work with minimal supervision. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Req ID:461221Address: 2008 Hwy 206 S. Bordentown, NJ, 8505Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!Maintenance Technicians play a crucial role in our operations by ensuring a safe, clean, and well-maintained environment. Additionally, you'll assist your manager in maintaining smooth operations to swiftly serve our customers. Your dedication significantly contributes to our customers' satisfaction and desire to return. No experience No problem! We will teach you!Job Functions:This is a customer-facing position with general customer service duties including, but not limited to, providing assistance, resolving issues, and ensuring a positive customer experience.Assisting store, restaurant, and truck care departments with general cleaning, maintenance, stocking, and customer service needs.Use of various tools and equipment to clean and maintain the overall facility operations to include, but not limited to, equipment repair and maintenance (HVAC systems, fuel systems, service trucks, refrigeration systems, etc.), pressure washing, plumbing repair, site inspections, and other assigned duties.Additional duties could include cross-training in other departments such as Store Cashier, Restaurant Cashier, Facility Maintenance, and Leadership Roles.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Ability to move, lift 25+ pounds. Ability to work in various temperatures.Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationMorning Availability 5AM-11AM Mon, Tues and Wed.Job SummaryResponsible for serving as support to the Asset Protection Supervisor to maintain workflow and count processes. Operating a forklift and working in tandem with all Inventory control team members to provide exceptional member shopping experience by conducting, organizing, and validating inventory counts, sorting damaged and RTV, reducing salvage, obtaining return authorizations from vendors and re-wrapping sellable merchandise. Works cross functionally within departments to complete related merchandise counts and inventory control responsibilities. Team Members:Carry out job functions and responsibilities as assigned. Support the application of club policies, procedures, and compliance. We strive for flawless execution and hold ourselves accountable.Acts with honesty and integrity and lead with the member in mind to address all concerns and to escalate any concerns, as appropriate.Ensure a safe and positive environment for our members and each other.Embrace inclusion and diversity, by working together with collaboration and respect. Work as a team to achieve goals. Move with speed and agility in everything we do. Innovate and adapt so we can move as fast as the world around us. Maintain a friendly and positive attitude. Members:Deliver service excellence through all points of contact.Resolve and deescalate to address every member concern. Ensure a safe and positive environment and experience for the members. Daily commitment to GOLD Member StandardsGreet, Anticipate, Appreciate (GAA)Fast, Friendly Full, Fresh, CleanClub Standards: Work as a team to deliver GOLD club standards daily. Work with commitment and pride to deliver GOLD- Grand opening look dailyAll items stocked and promotional plans executedMaintain visible accurate signageClean and organized, inside and outKnow your Business:Understand how to access and read production and/or financial performance reporting for your departmentSee the connection between consistent execution and the positive impact it can have on the businessMajor Tasks, Responsibilities, and Key AccountabilitiesProvides members with prompt and courteous service and assistance. Maintains high standards of safety, service, and sanitation for members and team members. Works with speed and accuracy to facilitate organized processes. Accurately processes damaged or defective merchandise by following appropriate salvage, donation, vendor return, reverse logistic, hazardous waste and destroy procedures. Obtains return authorizations from vendors, processes vendor chargebacks, and packages and ships merchandise returns based on vendor return policies. Works proactively with department teams to track, plan, coordinate and execute department inventory counts control county cycles as prescribed by Home Office within assigned deadlines.Follow count processes and procedures. Maintains the correct stock / inventory status for all damaged, defective, and returned merchandise. Assesses breakage logs associated with leaking, spoiled and broken merchandise and processes merchandise out of inventory. Processes freezer and dairy damages. Understands the company’s community / donation programs and administers salvage and donation merchandise orders. Conduct daily club safety walks, escalate findings to Asset Control Inventory SupervisorSupports Inventory Control Count Team in executing count processing as assigned.Review daily return reports, processes merchandise recalls, and processes tire and battery returns. Ensures that the AFS and release dates are followed. Ensures that the books are stocked, and that the execution of book returns are completed in partnership with the RICS. Processes the 945/948/950’s in partnership with the AP SpecialistRe-wraps sellable merchandise using appropriate seal and shrink-wrap packaging guidelines. Ensures the department is organized and clean. Follows established safety, filing organization, and lock-up standards. Completes and maintains necessary training and annual safety re-certifications to effectively operate a forkliftMaintains all club policies and procedures. Performs other duties as assigned, including working in other departments as needed. Regular, predictable, full attendance is an essential function of this job. QualificationsMust successfully complete required training and certification processes. Effective communication, interpersonal, and computer skills. Forklift experience preferred. At least 18 years of age. Environmental Job ConditionsMost of the time is spent moving about on hard surfaces. Frequently requires bending, climbing, crawling, pulling, reaching, stooping, and climbing ladders/step stools. Frequently requires lifting objects up to 30 pounds. May require lifting and moving heavy and/or awkward objects more than 30 pounds with assistance. Requires using a pallet jack to pull and push pallets. Exposure to both indoor and outdoor temperatures, as well as occasional exposure to extreme temperatures in freezers and coolers. Frequent exposure to hazardous material. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $16.25.

We are seeking experiencedCrew Leaders to work safely in the field for our Maintenance division.You will be a working team member who oversees all aspects of a crew from start to completion. What would my responsibilities be Supervise all lawn maintenance service activities of the crew,ensuring that all crew members have the required safety material, the training and tools needed to complete the job, and that they are always operating safely.Complete a pre-trip inspection report each day.Coordinate with branch management, customers, and employees as needed.Use landscaping tools and operate heavy equipment as needed. Safely drive crews to and from jobs, adhering to the Company's Safety Policy and ensuring that the public will be safe while in contact with crews.Why Join Yellowstone Competitive hourly pay,paid weeklyBenefits package including health, dental and vision insurance, 401k with a company matchIndustry-leading safety programsCompany provided safety gearEquipped with optimal and most professional equipmentHigh profile customers, worksites, and landscape results -A company that values and appreciates YOURequirementsLegal authorization to work in the United StatesExperience managing a crew consisting of laborers providing landscaping or related servicesMust have reliable transportation to the Branch or first job siteSafe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) requiredStrong English communication skills. Spanish a plusBecome part of the team dedicated to Excellence in Commercial Landscaping

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do: Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technician and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do it :Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads.Manages assigned work to meet professional and efficient execution of time and customer satisfaction.Reportsproblems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner.Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals.Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work.Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to allcontrolstechnicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors.Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required.Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on non-complex, non-critical equipment.Compilesjob documentation, such as certificate of completion, customer training form, training certificates and punch lists.Conducts extensiveself-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing,commissioningand servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations,and billof material, network layouts and electrical schematics as required.Assists in the development and testing of software programs necessary to operate the system per the intent of the project requirements.Compiles and/or completes project as-built and close-out documentation.Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation.Selects, orders, and tracks the delivery of materials for assigned projects.Coordinatesfactory-mounting processes to meet factory and project schedule.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.May provide field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with project field team.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look for:RequiredVocational School four year program graduate, an Associate’s degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.HIRING HOURLY RANGE: $30.67-$46.06/hr (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careers

Clean Harbors in South Plainfield, NJ is seeking a Field Service Supervisor to plan, lead, organize and coordinate the daily operations of the service line crew. This includes responsibility over proper operation of equipment, driving operational efficiencies at the work site and ensuring accurate documentation related to the job is completed in a timely fashion. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5! Focus on maintaining sustainability and cleaning the Earth Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Company paid training and tuition reimbursement Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerRead work order and ensures all required equipment is available and operational prior to starting jobsInspects equipment and general work area prior to starting any jobCorrect deficiencies that may cause accidents, injuries, lost productivity or harm to equipment or that are inconsistent with client's requirementsCommunicate Performs preventative and corrective maintenance on equipment when requiredCompletes all appropriate paperwork including service receipts, and submits to designated managementTrain Technicians I and II in equipment operation and service line processesOperate all necessary equipment in service line in accordance with operation training and safety proceduresPractice safety procedures in accordance with training and guidelines when workingProvide industrial services using appropriate techniques including handwork or manual work in accordance with established methods and applicable regulationsManually cleans, installs, fits, repairs valves, caps, hoses, pumps, gaskets and all other external and internal equipment on projectsUnderstanding of equipment maintenance and ability to perform maintenance utilizing supplied breathing air and applicable personal protective equipmentMaintain good housekeeping and cleanliness in the cleaning areasCheck equipment at the start of each shiftLead safety meeting and ensure HPC safety policies are followedMeet progress deadlines and efficiently utilizes resourcesInstruct, provide feedback and direct and assist crew in performance of job duties to complete work in accordance with client requirements and Company policies, practices and proceduresEnforce Company employee policies and may remove employee from job when requiredFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsEnvironmental field service operations, construction, manufacturing, or similar industry experienceAbility to travel overnight up to 2-4 nights per monthAbility to be on-call for emergency response situationsAbility to pull a trailer via pick-up truck preferredAbility to interface with clients and managementAbility to manage project related vendorsAbility to manage, reconcile, and review all job-related documentationAbility to work in confined spaces for periods of timeValid Driver’s licensePerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by position Preferred Qualifications: Experience in industrial emergency response, Hazmat clean-up, confined space entrySupervising/working in confined spaces Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class. Clean Harbors is a Military & Veteran friendly company. *CH

360 NJ-31, Washington, NJ 07882Automotive Service Technician All Levels Wanted!Sign-On & Relocation Bonus for Qualified Candidates!Competitive Hourly Pay + Top-Tier Benefits!Accelerate Your Career at Rossi Auto Group!Ready to kick your career into high gear Rossi Auto Group is calling all skilled Service Technicians who are passionate, detail-oriented, and ready to join a dealership with over 40 years of community excellence! We’re seeking top talent for both our GM and Chrysler Dodge Jeep Ram locations, where you’ll work in a team-oriented, high-energy environment that values and rewards your expertise. If you’re looking for a place where your career can truly shine, let’s get started!Why Rossi Auto Group Outstanding Hourly Pay– Recognizing your skills and dedicationSign-On & Relocation Bonuses– Move with ease, grow with usFull Benefits Package– Including Medical, Dental, and Life insurance401(k) Retirement Plan– Invest in a rewarding future with RossiPaid Time Off– Enjoy paid vacations and holidaysState-of-the-Art Facilities– Work with cutting-edge tools in a modern, professional environmentContinuous Learning– Keep up with industry innovations through ongoing trainingYour Role with Us:Diagnose & Repair:Identify issues quickly and perform precise repairs that meet both dealership and manufacturer standards.Multi-Skill Mastery:Work on engines, transmissions, electrical systems, suspensions, braking, AC systems, and more!Stay Ahead:Participate in regular training to keep up with the latest automotive advancements.Maintain a High Standard:Keep our shop organized, efficient, and in tip-top shape!What We’re Looking For:Experienced Technicians– Prior dealership experience requiredProficiency with Tech & Tools– Knowledge of the latest diagnostic and shop equipmentProblem-Solving Expert– Strong work ethic and diagnostic skillsCustomer Focused– Committed to delivering high-quality serviceTeam Player– A positive, can-do attitude with a commitment to excellenceIf you’re ready to join a dealership that’s dedicated to your growth, apply today! Upload your resume and complete our online assessment for immediate consideration. Start your journey with Rossi Auto Group – where every day is an opportunity to excel!Rossi Auto Group is proud to be an Equal Opportunity Employer.

99 South Black Horse Pike, Runnemede, NJ 08078Automotive Service Technician / Mechanic Top Techs Earn $100,000 Plus!$2,500 Sign-on Bonus for A and B Level Techs!Shop averaging 650 hours per week!Hiring now for Technicians of All LevelsLooking for Techs from New Jersey, Philadelphia or DelawareWork with the best brand in the business!Tool RelocationFlat Rate PayEarn the Money you Deserve!40-hour Guarantee. Every Other Saturday!If You Do Not have Service Tech Experience,Please Do Not ApplyWalk-in Applicants are Welcome!Business is booming! Now is the perfect time to continue your Automotive Service Technician career with Toyota of Runnemede!Come join us in our state-of-the-art facility. We need Service Techs of all levels. This rewarding opportunity won't last long - apply today!At Toyota of Runnemede, we have a strong and committed sales staff with many years of experience satisfying our customers’ needs. We treat the needs of each individual customer with paramount concern.We believe culture makes a difference and we strive to build lasting relationships with our employees, customers, and the community. We value our employees and invest in their success and offer the most competitive and aggressive pay plan in the area!We offer: Competitive pay plan$2,500 Sign-on Bonus for A and B Level Techs!40-hour guarantee. Every other Saturday!Shop averaging 650 hours per week!Medical and Dental insurance availableTool relocationFlat Rate PayPerformance-based bonusesClimate-controlled shop401(k)Paid vacation and holidaysStrong “team-work” environmentResponsibilities - Service Technician:Communicate with customers and/or service advisors for a description of vehicle problems, discuss work to be performed, and any anticipated future repairs.Repair / service all vehicle systems such as brakes, A/C, tires, transmission, engine, oil changes, fluid flushes, warranty work, and recalls.Test and adjust required systems to meet manufacturers' performance specifications.Test-drive vehicles, test components, and systems.Keep training up to date.Keep abreast of the federal, state, and local regulations that affect operations; comply with hazardous waste disposal and OSHA Right-to-Know regulations; provide necessary training on these regulations and ethical practices.Be prepared to work extended hours when necessary to achieve goals.Qualifications/Requirements - Service Technician:Experience requiredLocal applicants onlyMust have own toolsMust be able to use a variety of computerized systemsMust hold a valid driver's license.Team-oriented, flexible and focused on maintaining a high level of customer service.Computer skillsUphold the highest ethical standardsUpload resume and complete online assessment for immediate considerationApplicants must pass pre-employment testing to include background checks, MVR, and drug screening.We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Job SummaryUPS is currently hiring Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities that are performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. This position requires strong electrical background and must pass electrical assessment.Responsibilities:·Troubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encoders·Inspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer plates·Inspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coils·Inspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumps·Welding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of work·Performing preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.02 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

The pay range per hour is $36.50 - $40.50Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Job DescriptionEngineering & Facilities (MT2)About job:Tuition ReimbursementBenefits eligible within two weeks of employmentCurrently hiring for below shifts:L2 Key - Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential)L3 Key - Wednesday - Saturday from 10:00pm - 8:00am ($2.50 shift differential) About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay from $93-115K+ depending on experienceMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft ProtectionTo support our rapid growth, CoolSys Energy Design - Consulting Engineers (CED) is in search of a Senior Plumbing Engineer to join our team! Our ideal candidate will be able to design commercial plumbing and fire protection systems, maintain positive relationships with clients and vendors, and lead a team of staff to ensure timely and quality deliverables. Responsibilities: • Maintain responsible control over all design activities pertaining to the project, including engineering, quality control, and code compliance. • Perform site inspections to determine compliance with construction documents and resolve design issues during the construction phase. • Perform hydraulic calculations and work with outside resources to incorporate special hazard systems. • Document production of small and large projects. • Participate in conceptual design for specific projects. • Create and maintain AutoCAD and Revit drawing packages. • Provide deliverables and products such as calculations, drawings, and specifications related to plumbing. • Comply with project schedules, regulatory requirements, and industry best practices. • Ensure work is executed accurately and in a timely and cost-effective manner. • Ensure that design calculations and engineering drawings are constructible, comply with code, and meet customer quality requirements and company standards. • Manage, assign/prioritize workloads, and provide leadership to junior engineers performing plumbing and fire protection system design. • Assess and anticipate deliverables, prepare budgets and schedules, and communicate resource requirements to senior management. • Represent CoolSys Energy Design in project meetings covering technical issues, including meetings with utilities, owners, contractors, construction subcontractors, and inspectors. Qualifications: • Bachelor of Science degree in Mechanical Engineering. Other engineering or construction disciplines are considered based on experience and skill set. • 10 or more years of relevant professional experience. • Knowledge of Revit and AutoCAD required. • Previous experience managing staff is preferred. • Strong analytical, problem-solving, and decision-making capabilities, as well as demonstrated high-quality technical writing skills. • Team player with sound business ethics and the ability to multi-task in a fast-paced environment. • Ability to achieve project goals and deadlines with minimal supervision. • Willingness to work with all levels of internal staff, as well as outside clients and vendors to develop a full understanding of building energy systems and their operation. • High proficiency in Microsoft Office applications (Word, PowerPoint, Outlook, and Excel). • This position will require minimal travel to project sites. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.CoolSysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Clean Harbors in South Plainfield, NJ is seeking a Field Service Foreperson to join our safety conscious team. This position will be responsible for the direct supervision of the Field Technicians. Forepersons and Technicians will be responsible for the performance of tasks associated with emergency response (emergency spill cleanup), hazardous waste clean-up, site-remediation (tank and pit cleaning), equipment decontamination and handling of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursement Key Requirements:Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerTrain and mentor the Field Service TechniciansExecution of projects/jobs within budget and on timeEnforce and ensure OSHA, EPA and H&S standards or regulations are compliantUnderstand and work with the Coordinator in the communication of manpower, equipment and resources required to complete field service and emergency response projectsManage large scale field service and emergency response projects when directedEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryComplete associated paperwork, such as worksheets, vehicle inspections, equipment inspections and permitsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsBy position, may perform lead responsibilitiesRequired Qualifications:Previous experience in a physically intensive rolePrevious experience in a supervisory, crew lead or leadership roleAbility to travel for extended periods of time, overnightAbility to be on-call for emergency responseValid Driver’s licensePerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Previous heavy equipment experience (bobcats, excavators, etc)Previous environmental and/or industrial experience (ie. site remediation, spill response, hydro blasting, vacuum truck, tank cleaning, refinery-based work)Commercial driver license Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. *CH

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationIn accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is $15.50-19.38Job SummaryResponsible for assisting members in the selection and purchase of tires, properly installing and repairing tires, completing necessary tire bay documentation, and maintaining tire bay policies and procedures. Team Members:Carry out job functions and responsibilities as assigned. Support the application of club policies, procedures and compliance. We strive for flawless execution and hold ourselves accountable .Acts with honesty and integrity and lead with the member in mind to address any and all concerns and to escalate any concerns, as appropriate.Ensure a safe and positive environment for our members and each other.Embrace inclusion and diversity, by working together with collaboration and respect. Work as a team to achieve goals. Move with speed and agility in everything we do. Innovate and adapt so we can move as fast as the world around us. Maintain a friendly and positive attitude. Members:Deliver service excellence through all points of contact.Resolve and deescalate to address every member concern. Ensure a safe and positive environment and experience for the members. Daily commitment to GOLD Member StandardsGreet, Anticipate, Appreciate (GAA)Fast, Friendly Full, Fresh, CleanClub Standards: Work as a team to deliver GOLD club standards daily. Work with commitment and pride to deliver GOLD- Grand opening look dailyAll items stocked and promotional plans executedMaintain visible accurate signageClean and organized, inside and outKnow your Business:Understand how to access and read production and/or financial performance reporting for your departmentSee the connection between consistent execution and the positive impact it can have on the businessMajor Tasks, Responsibilities, and Key AccountabilitiesResponsible for the proper installation of tires, including mounting, dismounting, rotating, and balancing tires.Responsible for properly disposing of tires and ensuring propane tanks are filled per club policy. Maintains a clean and professional tire bay and waiting area. Merchandises tire displays and automotive products. Ensures that knowledgeable service is provided to members at the tire desk. Coordinates with Home Office regarding member tire needs as needed. Maintains an accurate and complete supply inventory. Understands and appropriately utilizes available special-order tire programs. Complies with safety and cleanliness standards and properly utilizes tire bay equipment. Assists members in the selection and purchase of tires including verifying the sizes for vehicles. Fills propane tanks as needed if certified per DOT requirements. Provides knowledgeable service to members at the tire desk. Understands and appropriately utilizes available special order tire programs. Ensures that all tire bay scheduling data and documentation is completed for sales and service orders. Maintains all club policies and procedures. Performs other duties as assigned, including working in other departments as needed. Regular, predictable, full attendance is an essential function of this job. QualificationsMust be at least 18 years of age. Valid driver’s license and ability to drive automatic and manual transmission vehicles required. Strong interpersonal skills required. Basic computer skills or a willingness to learn basic computer skills required. Prior tire installation experience preferred. Must pass Michelin training levels one through four within three months of hire. Ability to lift over 30 pounds with assistance. Environmental Job ConditionsExposure to both indoor and outdoor temperatures and weather conditions. Most of the time is spent standing and moving about continuously on hard surfaces. Frequent need to bend, climb, crawl, kneel, push, pull, reach, move side to side, stoop, and climb ladders/step stools.Frequently requires lifting objects up to 30 pounds. May require lifting and moving heavy and/or awkward objects more than 30 pounds with assistance. Usually perform job surrounded by moving cars, machinery and/or loud equipment that may require shouting to be heard. There may be occasional exposure to company approved chemicals and cleaning agents, and strong smells.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$25-$45 per hour DOE. Sign on Bonus: up to $3,000.00 DOEOngoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

We help YOU make it!Our Fleet Mechanic, Sr, makes$35.90 an hour! New hires start at 90% of the hourly rate $32.31, a wage increase goes into effect after 90 days of employment.SHIFT: Sunday - Thursday5:00 PM-1:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license DOT certified preferred.Must have (7) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (5) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.31 -$35.90. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.