RoadSafe is looking for Flaggers to join our team! $1500 Sign On Bonus
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below.
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment ( work boots 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Generally, works under the Supervision of Project Manager, TCT, TCS or maybe assigned to work independently Adhere to all Company Policies and Procedures Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Must be able to communicate with contractors and relate specific customer/job changes, and other information to Supervisor, Project Manager, office staff or other persons Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: $1500 Sign on Bonus Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer 
Qualifications: Must be 18 years or older Pass a drug test Driver’s license required Must be able to speak and read English Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification, Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training All candidates subject to a background check
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Driven by our Purpose, we are committed to building a more sustainable future to make the world better for everyone. With more than 16,000 employees in more than 50 countries, we combine our global reach with local presence. We support more than 10,000 customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. Join a company where the people challenge themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. You will be part of a team known for its industry-leading talent, unparalleled portfolio, and unmatched commitment to customer success. Flowserve’s culture promotes recognition and rewards creativity, hard work, and commitment. We invite you to put your talents and career in motion at Flowserve Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. 2nd shift position Responsibilities: Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma or GED or equivalentEquipment Experience – 5+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits The pay range for this role is $29.61 - $44.44per hour. Req ID : R-10063 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

At WK Kellogg Co, we exist to create joy and connection to inspire Gr-r-reat days. We believe that doing good is always good for business and we have stood for this since Kellogg Company was founded more than 117 years ago. We are passionate about doing our part to make nutritious foods, create social connectivity and respect natural resources. Together, these actions create positive progress for people and the planet – today and for years to come. We have big plans for how we are going to accomplish this, and we would love for you to join us in this effort. Do you have a skill set for working with electrical and mechanical components Join us in our state-of-the-art facility as aMaintenance Electrician in Lancaster, PA making Frosted Flakes, Shredded Wheat, Raisin Bran, and Crispix Cereal!Kellogg is looking to bring out the tiger in you by utilizing your skill set troubleshooting, repairing, and collaborating on electrical components! In this role you will partner with Operations, Quality Food Safety, and Environmental Health and Safety personnel as you keep the plant and production running. You will act as a problem-solver who helps our company maintain a strong reputation and market share!HERE’S A TASTE OF WHAT YOU’LL BE DOINGMaintaining Equipment and Utilizing Your PLC Knowledge- You will be alternating in between troubleshooting, preventive maintenance, and on the spot machine repair. You will need a firm focus and understanding of programmable logic controllers and robotics. Candidate must be able to maintain proper documentation, electrical upgrades, and make modifications and improvements. Analyzing Conditions and Providing Solutions- Identifying and examining production equipment failures to understand root cause analysis, with the help of interpreting schematics and drawings. Investigating, analyzing and repairing electrical systems while working with PLC programming and other computer-based applications.Driving Innovation and Communication- Actively improving plant efficiency and identifying cost saving opportunities. While maintaining an open dialogue with Maintenance Supervisors, Maintenance Mechanics and Operators, on day-to-day activities and long-term improvement projects.Incentives to join our team!$36.76/hour with shift differential2nd Shift: 3pm-11pm, 3rd Shift: 11pm-7amUp to a $5,000 sign on bonus!Incredibly competitive benefits package401k matchEmployee Stock ProgramYOUR RECIPE FOR SUCCESSRequired:Journeyman’s OR Electronics/Technical Degree OR 5 years of Industrial Electrical MaintenancePLC Troubleshooting experienceHigh School diploma or GEDBasic computer skills including Microsoft OfficeDemonstrated knowledge of behavior-based safety systemsSitting, standing, walking, lifting and / or repetitive tasks throughout the day. Employee will be required to occasionally lift up to 50lbsBonus Points:Previous experience working in a food manufacturing plantPrevious experience with AutoCAD, and SAPABOUT WK KELLOGG COAt WK Kellogg Co, we bring our best to everyone, every day through our trusted foods and brands. Our journey began in 1894, when our founder W.K. Kellogg reimagined the future of food with the creation of Corn Flakes, changing breakfast forever. Since then, we have embraced the same spirit of innovation and entrepreneurship in everything we do, channeling our founder’s passion and commitment to creating high quality and delicious products while fostering communities. Our iconic brand portfolio includesFrosted Flakes, Rice Krispies, Froot Loops, Kashi,Special K, Raisin Bran,Frosted Mini Wheats, andBear Naked. With a presence in the majority of households across North America, our brands play a key role in enhancing the lives of millions of consumers every day, promoting a strong sense of physical, emotional and societal wellbeing. Our beloved brand characters, including Tony the Tiger and Toucan Sam, represent our deep connections with the consumers and communities we serve. For more information, visitwww.wkkellogg.com.WK Kellogg Co is proud to offer industry competitivebenefits(Physical, Financial, Emotional, and Social) that vary depending on region and type of role. Be sure to ask your recruiter for more information!If we can help you with a reasonable accommodation throughout the application or hiring process, please THE FINER PRINTThe ability to work a full shift, come to work on time, work overtime as needed and the ability to work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position.WK Kellogg Co is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law.For US applicants:Where required by state law and/or city ordinance; this employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization. For additional information, please follow thislink.Let’s create gr-r-reat days, WK Kellogg Co Recruitment

Electro-Mechanical Technician Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world’s largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best. Stop and think: how would YOU put our drinks on every table Job Duties: Effectively complete preventive and proactive maintenance per the schedule to prevent breakdowns on equipment.Utilize root-cause analysis skills to investigate breakdown and line stoppages while collaborating with other departments.Acts as the "first responder" when a line stops producing and assures that the appropriate mechanical help is on site to correct any problems quickly using PLC, electrical and/or mechanical skills.Support the facility's food safety and food quality programs to assure compliance and achieve desired results.Prioritizes work to ensure timely maintenance, repair and installation of equipment, tools and utility systems to minimize manufacturing downtime and completes all required paperwork and documentation in the Computerized Maintenance Management System (CMMS).Utilizes the CMMS to open and close out work orders, check out spare parts, and other activities as required in the plant.Repair or maintain the operating condition of industrial production or processing machinery or equipment including inspection, assembly, disassembly, and replacement as necessary.Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.Operate newly repaired machinery or equipment to verify the adequacy of repairs.Analyze test results, machine error messages or information obtained from operators to diagnose equipment problems.Reviews maintenance reports and statistics to plan and modify maintenance activities.Inspects operating machines and equipment for conformance with operational and safety performance standards.Examine objects, systems or facilities and analyze information to determine needed repairs.Proven proficiency working with Basic Tool Room Equipment, Hydraulic systems, Programmable Logic Controllers and Ladder Logic.Actively pursues growth and developmental opportunities; seeks out feedback and responds without defensiveness; continuously finds ways to improve.Perform other duties as required by supervisor. Required Education, Work Experience & Certifications: Candidates must successfully pass the Ramsey Mechanical (Electrical) Skills and Aptitude Assessment in order to be considered.3+ years experience in industrial manufacturing maintenance is a must!Strong Electrical/Electronic troubleshooting and repair skills required.Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.Demonstrated ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.Able to apply common sense understanding to carry out instructions furnished in written, oral or diagram form.Computer skills.Willingness to work flexible hours.Strong written and interpersonal communication skills. Physical Demands of the Position: Standing, walking, kneeling and bending approximately 85% of dayComputer and administrative work approximately 15% of dayAbility to lift and carry up to 50 poundsAbility to communicate effectively. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: · Medical/dental/vision insurance · Life insurance 401(k) savings plan with company matchPaid holidays and vacation Make a Difference in YOUR Career!Our vision is both simple and ambitious: to put our drinks on every table.We are the world’s largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks.Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best.Stop and think: how would YOU put our drinks on every table Well-being benefitsDiscount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law.EducationPreferredTechnical/other training or betterHigh School or betterBehaviorsPreferredDedicated: Devoted to a task or purpose with loyalty or integrityTeam Player: Works well as a member of a groupDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellMotivationsPreferredFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsWork-Life Balance: Inspired to perform well by having ample time to pursue work and interests outside of workSelf-Starter: Inspired to perform without outside help

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Under general supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. Mentors mechanical technicians on building automation activities. Properly completes required project and service documentation.How you will do it:Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems softwareProvides sketches of field changes and discrepancies for engineering corrections and drawingsCommunicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction.Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement.Promotes the sale of add-on work.Manages assigned work to meet professional execution of time and customer satisfaction.Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager, or subcontractors on projects to coordinate activities as required in an ethical and professional mannerAdheres to all Johnson Controls and customer safety standards. Provides safety awareness on worksitesMay provide training to customers on electronic control systems operations. Delivers manuals and documentation to the customer for training needs as requiredMentors and trains mechanical workforce on building automation systems. Provides support to the mechanical staff on non-complex, non-critical equipmentCompiles job documentation, such as certificate of completion, customer training forms, training certificates and punch listsConducts extensive self-study (reading, research, and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company.Other duties related to the commissioning and servicing of building controls and facilities management systems as assigned.What we look for:Required: Vocational School four-year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field.Three years of industry experience or five years of experience in servicing electronic and or mechanical systems in HVACGenerally required knowledge includes HVAC controls systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniquesEffective interpersonal skills to represent Johnson Controls to customers and other outside contacts in an ethical and professional mannerAbility to explain technical information to technical and non-technical peopleLeadership skills to support the activities of mechanics working on non-complex, non-critical building automation equipment on a job sitePC experience required and the ability to program HVAC related softwareJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Republic Services is a leader in Environmental Services, partnering with customers to create a more sustainable world.We are Sustainability in Action our promise to be environmentally responsible and to help our customers be environmentally responsible too.Why choose Republic Joining Republic isn’t just about taking on a new job, it’s about making a commitment to create a more sustainable world together. Our people provide an essential service, serving and impacting customers, neighborhoods, and communities everywhere. As a company, we are proud of our values and encourage those who share in our aspirations to join our team: We protect our colleagues and communities through safe practices everywhere, every day.We are committed to serving our customers and communities by going above and beyond to exceed expectations.We take action to improve neighborhoods and communities by being environmentally responsible and creating a more sustainable world.We are driven to deliver results in the right way.We encourage a human centered culture that honors the unique potential and dignity of every person.M-F 2-3pm start - 10:30pm-12am endEvery other Saturday 6 hour shifts starting at 8amPay depends on experience $28-32/hr + $2 shift differentialPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:• Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

$22.00/hourUp to $5,000 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are as passionate about cars as we are. Whether you have recently graduated from a tech school or worked in a manufacturing warehouse, auto garage or auto dealership, this job might be a great fit for you ! Become a member of our Avis Budget Group enterprise. What You'll Do: You will perform preventative maintenance functions and light repairs on our auto fleet of vehicles. This includes oil, fluid, tire changes, repairs , rotations, and other basic light repairs, all in a safe manner. Depending on your experience, you may be assigned to assist our experienced auto mechanics. Perks You'll Get: Bi-weekly p ay (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive or mechanical abilities , help to obtain ASE CertificatesPaid time offMedical, d ental , and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits ( 401k )Employee discounts , including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License At least 6 months auto maintenance experience (ability to acquire 1 ASE certificate within first year)Comfortable working in a mechanical shop with moderate or loud noise levelsBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States6 months auto maintenance or auto tech school degree a bonus ! Who We Are: Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. PhiladelphiaPennsylvaniaUnited States of America

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.Expected salary range of $123,300 to $137,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of Power plant operations while acting as a resource and technical expert to engineers. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.Provide technical expertise and consultation through direct involvement and as a subject matter expert when consulted to identify and resolve equipment and system problems.Directly fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Perform engineering tasks as assigned by supervision applying engineering principles.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSBS Engineering, and 7+ years professional experience.Has completed assigned skills and knowledge development training (applicable Advanced Engineering, EPRI, and Constellation University training or industry provided training) to develop expert level of knowledge in designated areas. PREFERRED QUALIFICATIONSGas turbine experienceDCS/PLC controls experienceDemonstrated ability to mentor other engineers in key knowledge and skills. Demonstrated proficiency leading cross functional initiatives at an asset/plant

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today!What you will be doingShift: Sunday 2pm until complete and 4pm-complete on Monday-ThursdayEnsures effective preventative maintenance plans and schedules for all facility equipment and systems.Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately.Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls.Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications.Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations.Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center.Manages the inventory of spare parts.Must be willing to work extended hours, as needed, in order to meet productivity goals.Performs related duties as assigned.What your background should look likeRequires some technical vocational training, or equivalent combination of experience and education. Normally requires one (1) to two (2) years related and progressively responsible experience; strong electrical background preferred.1. Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities.2. Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.3. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI’s, PLC Inputs/Outputs.4. Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.5. Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scanners6. Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.7. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.8. Strong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements.9. Positions at this level are generally semi- skilled helpers in a particular trade area.10. Positions may perform more than one trade, but any trade performed should be at the semi- skilled Controls Tech I level.11. May require involvement of supervisor when dealing with non- routine issues to determine most appropriate course of action, but has the ability to identify and solve less complex controls related troubleshooting without the assistance of others.12. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including single phase or three phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic Controllers (PLC), HMI’s, PLC Inputs/Outputs. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scanners13. Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.14. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.15. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.16. Ability to communicate effectively both orally and in writing17. Strong interpersonal skills18. Strong organizational skills; attention to detailWhat Cencora offersWe provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members’ ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave.To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more.For details, visit https://www.virtualfairhub.com/cencoraScheduleFull timeAffiliated CompaniesAffiliated Companies: AmerisourceBergen Drug CorporationEqual Employment OpportunityCencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law.The company’s continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory.Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returned

Securitas Technology Corporation (STC) is a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world.STC offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the STC Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets.STC is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesRespond to trouble tickets to ensure application uptime and system performanceWork individually and as a team to diagnose and resolve application issuesExecute preventative maintenance tasks to maximize application availability and identify system faultsPerform routine configuration changes (user permissions, application configuration, etc.)Document all system modifications through a digital change control tracking systemProduce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audiencePerform pre-deployment end to end testing of all upgrades and major modificationsPerform on site installations of software upgrades and major modificationsMinimum RequirementsHigh School diploma required or equivalentFamiliarity installing and troubleshooting low voltage equipmentStrong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarmsStrong working knowledge of Microsoft OfficeStrong written and verbal communications skillsWorking knowledge of network communications and IP addressingExcellent problem solving and analytical skillsExcellent time management skillsPositive attitude and strong work ethicCertifications in enterprise grade CCTV and Access Control systems a plusSecuritas Technology Corporation offers comprehensive benefits including:Highly competitive salaryCompany training and industry leading certification programCompany VehicleCompany Cell PhoneMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Overview: With over 150 years of experience, and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. WHY JOIN US We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: Competitive pay Medical, Dental, Vision and Prescription coverage Paid vacation and holidays 401(K) match Life insurance, AD&D and long-term disability Tuition reimbursement Opportunities available nationwide Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more Pet Insurance Legal Plan, and ID Theft Protection Responsibilities: Project/Business Responsibilities: Maintain all company fleet vehicles for routine and preventative maintenance and repairs.Maintain records for all company fleet vehicles, including licenses, inspections, and insurance cards.Maintain records of all service and repairs to all company fleet vehicles.Manage a small inventory of essential parts and supplies for performing routine service and repairs.Source and procure all needed items from established vendors seeking the best price and quality. All items are to be bought with purchase orders. Submit all packing lists and documents to accounting for proper payment and tracking.Identifies mechanical problems either visually or with computer diagnostic equipment.Fill out a shop work order for all vehicles worked on every day. Have sufficient information on each work order to ensure accurate billing and inventory movement.Plans and establishes timetable to complete repairs and maintenance. Close work orders promptly.Make minor repairs on motorized shop equipment such as lifts, tow motors, etc., as requested.Drive a company vehicle, when required, in a safe manner. Qualifications: Project/Business Management:Ability to problem solve and troubleshoot.Good mechanical skills.Effective communication skills and the ability to schedule appointments with co-workers.Ability to read service and repair manuals.Proficient with computer diagnostic equipment and software.Maintain and clean garage equipment and tools to ensure they are always kept in a safe and usable condition.Ability to take direction from Supervisor and or management.Safe driving record.High school diploma or GED, course work at an accredited vocational, technical or trade school.Minimum of 5 years of experience or an equivalent combination of experience and trade school trainingA valid Pennsylvania inspection and emissions licenseAbility to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use typical business tools, including E-Mail, Word, Excel, etc. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

MAINTENANCE TECHNICIAN Reading, PA, USAReq #6786 Monday, September 11, 2023 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Pay and BenefitsPay Range from $25.41/hr - $38.33/hr based on skills and experience.Excellent Benefits Package including Health, Dental, Vision, and 401K Plan.1.5 pay over 40 hours.Uniforms provided.Up to 100 paid training hours annually for technicians to advance through the progressive skill levels.Stipend for safety shoes and safety glasses.RESPONSIBILITIES:Perform a variety of maintenance tasks to diagnose, repair, rebuild, replace mechanical, electrical, PLC, hydraulic and pneumatic systems on all plant equipment and facilities. Use maintenance knowledge to increase productivity, decrease downtime and waste.Work with a sense of urgency to respond to machine downtime events.Will be required to complete in-house training programs to develop equipment specific maintenance skills.The position may also require attendance at external training that may require occasional overnight travel. Must be able to follow all safety and company policies that include lock-out tag-out procedures. BASIC QUALIFICATIONS:At least 1 year of experience successfully troubleshooting and repairing industrial manufacturing equipment.Must have knowledge and experience with repairing and maintaining mechanical, electrical, hydraulic, pneumatic, PLC systems and industrial equipment. Be passionate about maintaining a safe and clean work environment. Ability to work any shift, overtime, and weekends as needed.Must have own basic tools (PCA will provide specialized tools).Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Technical degree and/or comparable experiencein successfully troubleshooting and repairing industrial machinery and equipment; particularly within the corrugated or packaging industry. KNOWLEDGE, SKILLS & ABILITIES: Excellent communication skills.Basic computer skills. Ability to work in a fast-paced environment. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyJob Start DateMonday, September 11, 2023

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 155,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location:Hazleton, PAJob Type:Full TimeShift Available:2ndCompensation:$23.75 -$37.75/hr Benefits Information Overtime PotentialVacation & Holiday PayHealth Insurance401(k)Tuition ReimbursementLife Insurance & Short Term DisabilityEmployee Discounts Principal Accountabilities Understanding and adhering to all safety rules and regulationsMaintaining a safe and clean work environmentTroubleshooting and repairing electrical and mechanical failuresRecommending changes, modifications, or upgrades to equipment to improve machine reliability and performanceReading electrical circuit drawings and documents, and mechanical drawings and documentsDocumenting completed work, modifications to equipment, findings, and parts information as requiredExecuting assignments in a timely manner with minimal supervisionPerforming other duties assigned Required Qualifications Must be eligible to work in the united states without visa sponsorshipMust be 18 years or olderAt least one year of experience troubleshooting electrical and mechanical issues on industrial equipmentAt least one year of experience using hand tools and maintenance troubleshooting equipmentAbility to understand and communicate in English (verbal/written) Preferred Qualifications Certification in Industrial Electricity I, II, and IIICertification in Motor ControlsExperience troubleshooting with PLC’s.Working knowledge of fluid power, hydraulics, and pneumaticsPrevious experience with Precision MaintenanceOne year of experience TIG WeldingIndustrial Building MaintenanceAmmonia refrigeration experienceAmmonia certificationsAt least two years of experience working in a fast-paced manufacturing environmentExperience with root cause analysis and continuous improvementBasic computer skillsSAP Experience Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

JOIN THE US FOODS TEAM!Ready to build a career with a company that’s leading the foodservice industry Schedule: Sunday - Thursday 3pm-11:30pm (2nd Shift)Starting Rate: $30/hr + Sign on Bonus BENEFITS START DAY ONE: medical, dental, vision, 401(k) Plan and Employee Stock Purchase Plan (ESPP) life insurance and paid parental leave. Check out our Benefits by clicking on the linkHealth Plan Identifier (benefitspricing.com) We help you make it! US FOODS®is one of the largest food distributors with a culture and history of promotion from within, excellent training programs and a continuous improvement focus. We are looking for a Diesel Fleet Mechanicwho will relish the chance to push their potential, grow and reap the rewards of joining theUS FOODS®family. Sign on Bonus Included!US FOODS®has a lot to offer: US FOODS®is the company built on YOU Matter, where your hard work is rewarded We are committed to compensation, benefits that respect, and reward our employees for their dedication and hard work Service recognition and employee rewardsBASIC PURPOSE Mechanic will be responsible for the troubleshooting, repair and maintenance of the Fleet road equipment including tractor, trailer, thermo-king, converter dolly and maintenance vehicles. Ensure compliance with all State and Federal trucking regulations. Mechanics will also be responsible for the documentation, completion, and to keep current the maintenance logs for all repairs and parts used daily. The position will be required to perform road rescue as needed.ESSENTIAL DUTIES AND RESPONSIBILITIES (Each item should account for 10% or more)Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.QUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license and DOT certification preferred.Must have (5) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (3) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & liftgates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently Type: 9. Twisting Occasionally

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending*eligibility requirements vary by position**medical plans vary by locationJob Title: Ammonia Refrigeration Manager Job SummaryTo maintain Ammonia Refrigeration equipment and perform maintenance activities for buildings and equipment to support facility operations. Ammonia Refrigeration Manager is responsible for the Plants Ammonia System and ensuring all Compliance and Safety concerns are met per the EPSM. The Ammonia Refrigeration Manger is responsible for Training, Scheduling and Managing Refrigeration Tech and to ensure Ammonia Refrigeration Tech meets all requirements and safety training to ensure Ammonia System meets and performs for buildings. Major Tasks, Responsibilities, and Key AccountabilitiesComplete proper and timely preventative maintenance to ensure equipment and systems in the ammonia refrigeration system (such as compressors, condensers, evaporators, pumps, vessels, valves, purge’s, etc.) operate efficiently, properly, and safely while also down time. Replace defective refrigeration equipment as needed. Control the equipment temperature set points to accommodate the needs of our customers and maintain the integrity of the product. Maintain control of the water treatment system and associated chemicalsEnsure all paperwork and reports are accurate, completed on time and meets OSHA and EPA regulatory requirementsMonitor third party maintenance vendors working near or with ammonia refrigeration system to ensure compliance with company, OSHA, and EPA safety policiesPerform ammonia and oil sampling for analysis on regular scheduleTrain team members on ammonia leak and spill procedures, coaching those team members who require additional training to meet the standardParticipate in leak and spill drills to meet requirementsActively participate in Emergency Response planning for locationInspect, test and calibrate ammonia detection system as neededQualifications/Experience/EducationEducation - High school diploma or GED. College coursework, continuing technical education or comparable business experience, documented electrical certification experience 480/ 3 phase and control voltage preferredMinimum 3-5 years Ammonia Refrigeration experience requiredKnowledge of Process Safety Management (PSM), or ability to receive in-housePSM training within 90 days requiredCertified Assistant Refrigeration Operator (CARO) Level 1 certification fromRefrigerating Engineers & Technicians Association (RETA) or RefrigerationOperator Class 1 license or ability to obtain within 1yr of hire requiredKnowledge of Computerized Maintenance Management Systems (CMMS)Must be able to Supervise a small group of para-professional staff in an organization characterized by highly transactional or repetitive processes. Contributes to the development of processes and procedures. Typically requires 3 years experience in the related area as an individual contributor. Thorough knowledge of functional area under supervision. Bilingual PreferredJob ConditionsIndependently lift up to 40 lbs frequently and 60 lbs occasionallyAble to sit, stand, walk bend, squat on a frequent to continual basis in a refrigerated warehouse environmentAble to grasp, reach, push or pull (such as boxes of product, or a hand truck) on a frequent basisAble to step up onto and down from equipment as required by task (such as forklift, reach truck, etc.)Endurance for continuous, fast paced workMust be able to pass respirator fit test, wear respirator and may be required to wear Self-Contained Breathing Apparatus (SCBA) if authorized & trainedAble to adjust to fluctuating temperatures and withstand freezing temperatures as low as -20 degrees FahrenheitAbility to work in a noisy warehouse environmentAbility to work at elevated heights while wearing PPE (Personal ProtectiveEquipment) for the job (such as fall protection harnesses)Able to work while wearing appropriate PPE (Personal Protective Equipment)for the job (such as steel-toed protective footwear, harness, safety glasses, hardhat, gloves, insulated clothing, etc)Ability to handle and physically be near products which may contain food allergens (such as fish, shellfish, peanuts, etc.)Ability to utilize equipment for the job (such as computers, cell phone, handheld trackers, copiers, scanners, printers, etc. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $82,000.00.

Company DescriptionPilot Company is an industry-leading network of travel centers with more than 30,000 team members and over 750 retail and fueling locations in 44 states and six Canadian provinces. Our energy and logistics division serves as a top supplier of fuel, employing one of the largest tanker fleets and providing critical services to oil operations in our nation's busiest basins. Pilot Company supports a growing portfolio of brands with expertise in supply chain and retail operations, logistics and transportation, technology and digital innovation, construction, maintenance, human resources, finance, sales and marketing.Founded in 1958 by Jim A. Haslam II and currently led by CEO Adam Wright, our founding values, people-first culture and commitment to giving back remains true to us today. Whether we are serving guests, a fellow team member, or a trucking company, we are dedicated to fueling people and keeping North America moving.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other characteristic protected under applicable federal, state or local law.Military encouraged to apply.Job DescriptionBring your technical talent to our PilotTeam! NOT too good to be true, you will receive a substantial quarterly bonus, be off on weekends andNO on-call! You are dispatched from home and work 45-50+ hours a week (even during winter).Company service vehicle, all tools, equipment, cellular phone/iPad and laptop provided. Comeplay an important part of keeping roughly 15 of our store locationsrunning smoothly nearElkton, MD.The purpose of this job is to perform installations, maintenance, and repairs of facility HVAC/R, food service equipment, plumbing, and electrical systems within various food and retail locations.Responsibilities:Respond to service requests; troubleshoot, diagnose, and repair based on warranty and industry standardsCommunicate with service tech supervisor and store management to report repair statusComplete same day work order repair notes and forward to supervisor; ensure charge allocations are entered accordinglyMonitor truck stock to ensure required parts are availableMaintain service vehicle, tools, and uniforms in accordance with company standardsEnsure facility interiors and exteriors are inspected for safety and maintenance issuesEnsure repairs, equipment, and work activities are performed in accordance with OSHA regulationsModel behaviors that support the company’s common purpose; ensure guests and team members are supported at the highest levelEnsure all activities are in compliance with rules, regulations, policies, and proceduresQualificationsHigh school diploma or equivalent certificate requiredValid state driver’s license and positive driving history requiredMinimum three years’ recent maintenance experience of commercial HVAC systems required; certification preferredMinimum three years’ recent maintenance experience to include repairing commercial cooking or refrigeration equipment requiredBasic knowledge, understanding, and ability to repair commercial plumbing and electrical systems requiredBasic understanding of OSHA guidelines, policies, and proceduresBasic knowledge of the functionality of a Building Management System (BMS) and Energy Management System (EMS)Strong analytical and problem solving skillsExcellent written and verbal communication skillsAbility to work independently with minimal supervisionIntermediate mathematical skillsAbility to read and interpret site drawingsAbility to collaborate with various departmentsStrong attention to detailAbility to work in congested areas during business hoursStrong customer service skillsTravel required less than 10%Climb laddersLift and carry up to 50 poundsExposure to inclement weatherAbility to bend, stoop, twist, crawl, kneelAdditional InformationFull range of affordable benefits available.

Maintenance Mechanic Camden, NJ, USAReq #1162 Wednesday, June 19, 2024 About UsOur state-of-the-art automotive disassembly plant in Camden, New Jersey has the capacity to dismantle 7000+ vehicles each month. We are one of the country’s largest automobile recyclers and your go-to source for used auto parts online – any year, any make, and any model. We have thousands of car parts listed on our online store ready to be shipped nationwide. We take pride in being involved in every step of the process and being able to ship used auto parts to our customer’s doors nationwide. SummaryThe Maintenance Mechanic is responsible for ensuring operation of equipment by conducting timely preventative maintenance requirements. Duties include locating source of problems by observing mechanical devices in operator, disassembling machinery or equipment for repairs, performing welding assignments, and reassembling equipment after completion of repairs and inspections. This career requires experience in preventative maintenance on equipment, knowledge of operational theories of diesel engines and hydraulic systems, welding, fabricating, and troubleshooting equipment.II.ESSENTIAL DUTIES & RESPONSIBILITIESMaintains equipment in proper working condition through planned, preventative maintenance procedures as directed.Responds to and repairs all equipment breakdowns.Inspects and tests machinery and equipment to diagnose machine malfunctions.Dismantles and reassembles machines and equipment.Installs new or repaired parts.Installs new machinery and equipment.Fuels and lubes all equipment.Keeps supervisor informed of any conditions concerning the equipment, repairs and maintenance supplies needed.Responsible for all company tools and equipment assigned to them.Operates a variety of equipment necessary to make repairs.Must be able to work with a minimum amount of supervision.Observes all safety rules, including proper safety equipment, lockout-tagout, confined space, etc.Performs general facility cleanup.Other duties as assignedIII.Required Skills / AbilitiesDemonstrated ability to lead a teamRECYCLING TO CREATE RESOURCEAbility to work independentlyAbility to work overhead, climb ladders, kneel, and stand for long periodsAbility to work in all elements such as rain, cold, and heatAbility to handle stressful situations, manages time, and multitasksAbility to communicate effectively in both spoken and written formIV.Education & ExperienceThree years maintenance experienceExperience in repair of metal processing equipment, heavy machinery and trucksBackground in electrical, pneumatic, hydraulic and mechanical areasHigh school diploma or GED equivalent My Auto Store provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.*E-Verify is a registered trademark of the U.S. Department of Homeland Security. This business uses E-Verify in its hiring practices to achieve lawful workforce. Other details Pay TypeHourly

R20454100889165 East 9th Avenue, Runnemede, New Jersey 08078T ruGreen accepts applications on an ongoing basis. Job Description Field Operations Every TruGreen associate is committed to quality. We all have an important role to play in the success of our company. There is no job too small or too great that doesn't equally impact our future.We know there is no business without the people behind our brand that make it - and our services - a reality. You play a critical role in contributing to a high-performing team.At TruGreen, we are committed to our customers, our teams, our values and the science of lawn care. A career with TruGreen is a career full of new opportunities to learn and take pride in your work.#BeTruGreen and find yourself with a satisfying and rewarding career.What's In it for YOU!A job that keeps it interesting-no two days are alike, and you get to work outside instead of inside a stuffy officeAwesome teammates who are dedicated to our values, customers, lawn science, and YOU!Competitive wages* Average income is $850 - $1,200/week (based on an hourly rate and average bonuses earned for qualifying specialists meeting performance expectations)Affordable medical and prescription drug plansFinancial health resources, including 401kTraining & DevelopmentPaid Time Off/Sick LeaveYour ResponsibilitiesYou are a TruGreen ambassador, responsible for creating positive relationships between our customers and our products. You help our customers live life outside.Responsibilities include:Administer timely lawn applicationsDiagnose and correct customer problems through service calls and other communicationsRecommend and sell products and service information to new and existing customers, resulting in growth of our customer baseComplete production reports, new sales forms, customer invoice forms, daily vehicle inspection report, and cancel/skip noticesNote: All positions require a valid driver's license, and some may require appropriate state/local licensingIncluded RolesLawn Specialists (Residential or Commercial)Tree & Shrub SpecialistAeratorLaborerWarehouse TechnicianAs America's number one lawn care company, TruGreen® is dedicated to using our science-based expertise and local experience to create beautiful, healthy properties across the nation. Through our lawn and tree & shrub services, we help improve the health and beauty of outdoor spaces everywhere, so people can Live Life Outside.Ability to speak, read and write fluently in English is required.You MUST BE physically located in the United States while performing this job.TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit https://trugreen.phenompro.com/us/en/eeoc-and-eeo-policy or to request an application accommodation, please visit https://trugreen.phenompro.com/us/en/disabilities-accommodationsCalifornia Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.TruGreen performs pre-employment testing.To view our disclaimer, https://trugreenjobs.com/us/en/disclaimer

Responsibilities: Work with little to no supervisionClean and lubricate shafts, bearing, gears, and other parts of machineryTroubleshoot/repair machinery such as slitters, collectors, high speed welders, conveyors, and palletizersInstall and maintain pipe systems, hydraulic and pneumatic equipmentRepair and replace gauges, valves, pressure regulators, and other related equipmentBuilding maintenance including minor plumbing, welding, and general upkeepRepair and assess electrical issues as they ariseAble to familiarize yourself with our CMMS system and log labor/parts according to established expectationsMust be willing to work overtime, including weekends and off-shifts as requiredMust participate in on-call program and may be required to work additional hours on off shift due to on-call programUnderstands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent – Technical degree in maintenance-related field preferred2 years minimum experience as a maintenance mechanic in metal manufacturing environment with the ability to troubleshoot preferred but not requiredKnowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturingPLC experience preferredExperience with and ability to use all types of welding, cutting, machine, and hand tools preferredExperience in high speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Description:We Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Maintenance Mechanic keeps our associates safe by maintaining all equipment inside the warehouses/buildings and ensuring it meets industry standards and operates efficiently according to its specific tasks.The Mechanic, Maintenance is responsible for repairs, adjustments, and ongoing maintenance of warehouse facility. Performs general electrical and/or repairs of and various equipment on company premises. Conduct periodic inspections to determine maintenance work required. Maintains all equipment necessary to perform work.Responsibilities may include, but not limited to:Obtains work schedule and daily production paperwork and prepare for operations. Performs daily safety checks.Performs maintenance, repairs, and installations on various equipment within guidelines of processes and standards.Maintains, replaces, builds, adjusts, and modifies the facilities, buildings, and the grounds according to a set schedule and in emergency and non-emergency situations.Performs general housekeeping duties and keep maintenance area orderly and clean as required. At the end of the shift secure all equipment and complete all necessary reports and paperwork.Performs other related duties as assigned.Qualification:High School Diploma/GED or Equivalent 6+ months maintenance and repair or related area Maintenance and repair or related area in warehouse facilityPass post offer drug test and criminal background checkCompany descriptionPFG Customized Distribution meets the special needs of some of America’s most recognized national chain restaurants, including Cracker Barrel, TGI Friday’s, Outback Steakhouse, Red Lobster and Ruby Tuesday. Providing customized attention and a centralized contact for product lines, menu changes and account coordination, PFG Customized Distribution serves customers across the United States and in more than 40 countries.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Description TheSecurity Enterprise Solutions (SES) Operationis the cornerstone of Leidos’ comprehensive suite of fully-integrated security solutions for aviation, ports, borders, and critical infrastructure customers around the world. With our new, combined portfolio, our operation has more than 24,000 products deployed across 120 countries. Leveraging this portfolio, our core technical strengths, and robust R&D initiatives, we are positioned to address emerging and evolving threats through rapid development of innovative solutions for our global customers. Travel to various customer sites domestically and internationally as required. SES is comprised of three divisions to align with our customers’ missions and needs:Aviation SolutionsPorts & BordersGlobal ServicesSPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIESINCLUDE BUT ARE NOT LIMITED TO:Performing customer support activities involving the installation, modification, and repair of complex equipment and systemsConducting on-site installation and testing of equipment to ensure proper working order.Isolating equipment start-up malfunctions and taking corrective action.Performing ad-hoc and predetermined work assignments with instructions.Following all established guidelines, procedures and policies. Working on assignments which are semi-routine in nature where ability to recognize deviation from accepted practice is requiredManaging resources, maintaining schedules, and coordinating all repair activities in priority sequence to ensure adherence to contractual service level agreements (SLAs); and Working in a customer environment with systems operated in a 24/7 environment which require immediate response times (either while on-shift or after hours on-call) and driving long distances to sites.Accepting and updating work order in CRM systems such as Salesforce, Maximo, and GURU for our customers.Basic Qualifications:Related Trade experience (electrical, electronic, mechanical)/Military Training (electrical, mechanical, electronics). (Equivalence achieved through comparative work and life experience of 2 years of electrical or mechanical field service role). Computer literacy; competency in use of all programs within MS Office Suite and aptitude for learning specialized software programs.Minimum of 2 years’ experience directly involved in troubleshooting and field repair of electrical and electronic systems and equipment.Individuals shall possess excellent communications skills and have a strong orientation for customer focus and teamwork. Must be responsive to all customer issues at all times. Must be willing & able to travel at short notice.Must be able to pass an in-depth background check (TSA eQIP).Preferred Qualifications:Possess excellent organizational, communication, interpersonal skills with the ability to multitask several projects at once.Excellent customer service skills and the ability to handle stressful situations.Self-motivated, reliable, and accountable individualMust be able to lift/carry 50 lbs.Must be able to push/pull 200 lbs.Must be able to move/ manipulate equipment weighing up to 1000 lbs. with the assistance of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation.Job requires frequent bending, stooping, twisting, turning, and working in unusual positions requiring full body mobility.Must be able to work safely and follow safety precautions in extreme environments (temperature, humidity, noise, confined spaces, etc.) around dangerous industrial equipment.**Salary Range for this position: $65,000 to $70,000 **Original Posting Date:2024-06-17While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $44,850.00 - $81,075.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Our client, a Modular Home Manufactureris seeking constructionemployees to join their team. The ideal candidate will have a good work ethic, be a team playerand be dependablewhich will align successfully in the organization.Job Title: Sit down stand up- Forklift OperatorLocation: Leola, PAPay: $17-19/hour DOEWhat’s the Job Provide construction support in the assembly of manufactured modular homes- forklift operation and material handling Ability to use hand and power tools Ability to follow safety standards What’s in it for me 1st shift- Monday-Friday Competitive pay rate Temp to Perm Weekly pay If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson WellsManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Aspire Bakeries is a North American baking company with a leadership position in specialty frozen baked goods. Formed from leading bakery companies, its innovative food portfolio includes breads, artisan breads, buns, cookies, donuts, muffins and pastries from beloved brands like®,®, and®. With 13 bakeries in North America, we are committed to driving innovation, predicting upcoming consumer trends and flavors, and exceeding our customers’ expectations. Aspire Bakeries champions the values of Integrity, Ownership, Customer Focus, Creativity and Care to help us deliver on People Safety, Food Safety, Quality and Collaboration. The Technician I, FSQA-Bakery is a contributing member of the team-oriented FSQA process, including responsibility for protecting the food by conducting food safety and quality sampling, testing and completing required documentation to meet Aspire Bakeries’ Integrated Management System Program (AIMS) requirements. Responsibilities:Understanding of and demonstrates Aspire Bakeries’ core values and acts with integrity, takes ownership in their work, proactively identifies the needs of our customers, generates creative and new ideas, and promotes an environment where our people and foods are safe.Understanding of the Food Safety and Quality Objectives and Global Food Safety and Quality Policy.Verifies all applicable Company expectations are met.Ensure that our foods meet Company standards and specifications.Understanding and identification of non-conforming raw materials, semi-finished and finished foods.Report food safety and quality non-conformances and deviations to FSQA Manager.Placing food on hold physically and in SAP for further evaluation. Communicate any human, food or equipment safety concerns to Supervision immediately.Support the Hazard Analysis & Risk-Based Preventive Controls Food Safety Team in the participation of an effective Food Safety plan focused on the elimination of biological, chemical, physical and economically motivated hazards from our foods Conduct sampling, testing, and documentation of the Aspire Bakeries’ Integrated Management System (AIMS), including procedures and records.Understanding and verification of 21 CFR 117 Subpart B Current Good Manufacturing Practices (cGMPs), Prerequisite and Preventive Control Programs and Critical Control Points (HACCP)Participate in Pre-operational inspections with a cross-functional team. Physical bakery inspections, such as GMP and Hygiene, Food Safety, Foreign material, Glass and Hard Plastics, etc. Complete sensory, physical, and packaging evaluations on finished food and report the results to bakery managementVerify finished food case labels are accurate.Basic understanding and verifying of the bakeries QAP. Quality Control Points are being monitored at the prescribed frequency, with the correct method, and documented standard as outline din the QAP or quality procedure.Trained in and follow the Critical to Quality Control Points as identified in AIMS 5.0 Quality Flow Diagram and verification that manufacturing is adhering to monitoring checks.Understanding of the Food Safety Flow Diagram as outlined in AIMS 7.0 HACCP Food Safety and Preventive Control Program and verification that manufacturing is adhering to CCP monitoring checks.Verification of the Manufacturing and visual aids.Basic training and understanding of SPC and QCP checks recorded in MII, including the quality dashboard for those Bakery locations using MII.Trained in and verification of AIMS Net Weight Policy and MAV limits.Verification of lot traceability, how packaging and raw ingredients are coded, coding of finished foods, and recipe verification against the manufacturing specification.Verification and understanding of AIMS Document Control and Record Completion Procedures.Verification and understanding of AIMS Programs (i.e. 8.0 GMP, Hygiene and Personnel Practices Program, 19.0 Allergen Control and Preventive Control Program, 11.0 Nonconformance Program).Understanding and verification of Cross traffic (Raw to RTE) is controlled. Designated walkways are being used as control measures as outlined in Access and Movement of Personnel. Traffic plans and zoning maps are followed by all employees, management, visitors, and contractors.Effective Completion of required AIMS and Alchemy training as outlined in the FSQA Training Curriculum Map and Aspire Bakeries’ Cares Training Calendar.Performs other duties as assigned or required Qualifications:High School Diploma.Some college science courses or experience in the food industry1-2 years related experienceMust be 18 years of ageExperience with SAPAspire Bakeries is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

The pay range per hour is $31.00 - $37.02Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About the Job:Up to $1.50 shift differentialTuition Reimbursement programBenefits eligible after two weeks of employmentCurrently hiring for below shift:Wed- Sat:5:00pm - 3:00amAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

At WK Kellogg Co, weexist to create joy and connection to inspire Gr-r-reat days. We believe that doing good is always good for business and we have stood for this since Kellogg Company was founded more than 117 years ago. We are passionate about doing our part to make nutritious foods, create social connectivity and respect natural resources. Together, these actions create positive progress for people and the planet – today and for years to come. We have big plans for how we are going to accomplish this, and we would love for you to join us in this effort.Looking for a challenging yet rewarding career with a company that produces the world’s most recognizable products Join us in Lancaster, PA as a Maintenance Mechanic on either 2nd or 3rd shift. This location has been cooking upcereal using ingredients from field to bowl for over 70 years! We are passionate about the products we make, the people we work with and the city we live in.As a Maintenance Mechanic, you’ll help bring cereal to customers by ensuring our production equipment is operating efficiently. You will have the chance to work on a variety of mechanical equipment from production to packaging in the plant, as well as collaborate with operations, safety, and expert maintenance leadership!HERE’S A TASTE OF WHAT YOU’LL BE DOINGConducting Preventative Maintenance–Perform basic troubleshooting, repairs and preventative maintenance on production equipment as well as building. You’ll aim for excellence every day, helping us bring the best to families!Ensuring Performance Efficiency–Manage machine performance by supporting Operations when they encounter mechanical failures or issues doing production as well as equipment set-up and change overs. We’re looking for someone who brings dedication to the table!Following Best Practices–Understand, follow and enforce all established guidelines. Your attention to detail will ensure compliance with all safety, health, quality and company policies, procedures and recognized practices. You’ll help us keep delivering success!Incentives to join our team!$36.76/hour with shift differential2nd Shift: 3pm-11pm, 3rd Shift: 11pm-7amUp to $5,000 sign on bonusIncredibly competitive benefits package401k matchEmployee Stock ProgramYOUR RECIPE FOR SUCCESSJourneyman’s OR Mechanical/Technical Degree OR 4year of equivalent experienceBasic knowledge of troubleshooting industrial manufacturing equipmentHigh School diploma or GEDBasic computer skills including Microsoft OfficeDemonstrated knowledge of behavior-based safety systemsSitting, standing, walking, lifting and / or repetitive tasks throughout the day. Employee will be required to occasionally lift up to 50lbsBonus Points:Previous experience in food manufacturingExperience with troubleshooting, repairs and preventative maintenance on mechanical and electrical equipmentKnowledge of pneumatic and hydraulic systemsPrevious welding experienceBasic computer skills, including proficiency with Microsoft OfficeABOUT WK KELLOGG COAt WK Kellogg Co, we bring our best to everyone, every day through our trusted foods and brands. Our journey began in 1894, when our founder W.K. Kellogg reimagined the future of food with the creation of Corn Flakes, changing breakfast forever. Since then, we have embraced the same spirit of innovation and entrepreneurship in everything we do, channeling our founder’s passion and commitment to creating high quality and delicious products while fostering communities. Our iconic brand portfolio includesFrosted Flakes, Rice Krispies, Froot Loops, Kashi,Special K, Raisin Bran,Frosted Mini Wheats, andBear Naked. With a presence in the majority of households across North America, our brands play a key role in enhancing the lives of millions of consumers every day, promoting a strong sense of physical, emotional and societal wellbeing. Our beloved brand characters, including Tony the Tiger and Toucan Sam, represent our deep connections with the consumers and communities we serve. For more information, visitwww.wkkellogg.com.WK Kellogg Co is proud to offer industry competitivebenefits(Physical, Financial, Emotional, and Social) that vary depending on region and type of role. Be sure to ask your recruiter for more information!If we can help you with a reasonable accommodation throughout the application or hiring process, please THE FINER PRINTThe ability to work a full shift, come to work on time, work overtime as needed and the ability to work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position.WK Kellogg Co is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law.For US applicants:Where required by state law and/or city ordinance; this employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization. For additional information, please follow thislink.Let’s create gr-r-reat days, WK Kellogg Co Recruitment

Be part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we will give you the space and opportunities to grow and succeed. We are committed to making a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:This skilled position involves programming, troubleshooting, configuring, commissioning, and servicing Fire Alarm Systems, as well as other related building system products at customer sites.Including panel reprogram, device replacement/repair, resolving low voltage circuit troubles, and system testing.Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks.Position involves the programming of fire alarm, security, and access control system panels, but will also include a strong focus on networked fire alarm systems.How you will do it:Perform programming on fire alarm systems.Respond to customer service calls in a timely and efficient manner, troubleshoot, and repair as needed.Will be required to participate in after-hours service program.Communicate with PM on current work order status and receive updates on outstanding customer issues.Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational/product manualsSupervise and inspect the installation of equipment to meet customer and contract specification.Complete necessary certification courses on internal and external products used.Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner.What we look for:RequiredAt least five years of documented Fire Alarm experience.Mass Class D System Tech License.High School Diploma or equivalent required.Experience in reading/interpreting blueprints, submittals, and operational/product manuals.Experience with hand tools test equipment, multi-meter usage, digital analyzer, and commissioning devices.Capable of performing physical labor to include carrying/moving equipment and tools up to 50-70 lbs.Able to work on and safely use ladders and lifts.Able to work flexible hours including weekends to meet customer requirements.Demonstrate a high level of customer service.Ability to lead and work well with team members.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Able to obtain and retain any licenses that are required by National, State and Local codes.Basic understanding of Network concepts and architectures.PreferredTwo-year Associates Degree in Electronics; Network; Computer Science or related field.NICET level II or ability to obtain in first year.OSHA 10 Certified.Additional experience with Access Control, CCTV, and Security Systems.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

$22.00/hourUp to $5,000 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are as passionate about cars as we are. Whether you have recently graduated from a tech school or worked in a manufacturing warehouse, auto garage or auto dealership, this job might be a great fit for you ! Become a member of our Avis Budget Group enterprise. What You'll Do: You will perform preventative maintenance functions and light repairs on our auto fleet of vehicles. This includes oil, fluid, tire changes, repairs , rotations, and other basic light repairs, all in a safe manner. Depending on your experience, you may be assigned to assist our experienced auto mechanics. Perks You'll Get: Bi-weekly p ay (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive or mechanical abilities , help to obtain ASE CertificatesPaid time offMedical, d ental , and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits ( 401k )Employee discounts , including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License At least 6 months auto maintenance experience (ability to acquire 1 ASE certificate within first year)Comfortable working in a mechanical shop with moderate or loud noise levelsBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States6 months auto maintenance or auto tech school degree a bonus ! Who We Are: Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. PhiladelphiaPennsylvaniaUnited States of America

ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P GlobalPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:• Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Securitas Technology Corporation (STC) is a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world.STC offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the STC Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets.STC is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesRespond to trouble tickets to ensure application uptime and system performanceWork individually and as a team to diagnose and resolve application issuesExecute preventative maintenance tasks to maximize application availability and identify system faultsPerform routine configuration changes (user permissions, application configuration, etc.)Document all system modifications through a digital change control tracking systemProduce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audiencePerform pre-deployment end to end testing of all upgrades and major modificationsPerform on site installations of software upgrades and major modificationsMinimum RequirementsHigh School diploma required or equivalentFamiliarity installing and troubleshooting low voltage equipmentStrong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarmsStrong working knowledge of Microsoft OfficeStrong written and verbal communications skillsWorking knowledge of network communications and IP addressingExcellent problem solving and analytical skillsExcellent time management skillsPositive attitude and strong work ethicCertifications in enterprise grade CCTV and Access Control systems a plusSecuritas Technology Corporation offers comprehensive benefits including:Highly competitive salaryCompany training and industry leading certification programCompany VehicleCompany Cell PhoneMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Responsibilities: The HVAC Journeyman is responsible for the installation of HVAC systems including the lay out of roof penetrations, ducting, and the layout of sheet metal fittings following customer specifications, applicable building codes, and proper piping practices. Provides support on HVAC construction jobs by reading and interpreting blueprints as needed by the foreman to ensure a timely and quality completion of the project. Provides the required laying out of the roof penetrations and ducting; and laying out of the sheet metal fittings as directed by the foreman. Assists the Construction foreman as needed on the job. Provides support by coordinating and following job schedules, i.e., labor hours, and material costs. Performs other related duties and projects as assigned by management Qualifications: High school diploma and trade or technical school classes 3+ years of experience in the construction industry, and hands-on field experience in commercial HVAC construction and major market remodeling. Knowledge of UMC/SMACNA requirements. Knowledge of commercial HVAC construction products and tools. Knowledge of refrigeration equipment Knowledge of blueprints, detailing HVAC duct fittings. Ability to grease duct weld and complete minor electrical installation. Ability to complete sheet metal layouts and fabrications, good mechanical skills. Knowledge of electrical systems and ability to wire installations. Knowledge of carpentry. Knowledge of refrigeration systems and piping of refrigeration equipment. Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment. Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing. Ability to hang evaporation coils and install overhead hangers. Ability to use hand and power tools and good mechanical skills. Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance. Ability to work with minimal supervision. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more. PRIMARY PURPOSE OF POSITIONPerforms advanced engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses superior knowledge in functional discipline and its practical application and has excellent knowledge of applicable industry codes and regulations. Functions with recognized industry-level of expertise in a technical area.PRIMARY DUTIES AND ACCOUNTABILITIESPerform advanced engineering and technical tasks in support of nuclear plant operations.Perform independent research, reviews, studies and analyses in support of technical projects.Provides in-depth technical expertise to develop, manage and implement engineering activities related to plant safety, reliability, maintainability, and availability ensuring compliance to customer's needs, regulatory requirements, and corporate policies.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices and codes are used in preparation of plans and specifications.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provides initial or complete task management of engineering issues.Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.Supports plant design modifications, testing and problem solving.Assure all engineering products prepared or overseen are in accordance with applicable safety analyses, industry codes, and all regulatory requirements.Develop, implement and coordinate functional supervisory activities including, but not limited to, personnel, budgetary accountabilities and planning goals with respect to engineering personnel.*This Engineering role can be filled at Mid, Senior or Senior Staff Engineer levels. Please see minimum qualifications list below for each level*Expected salary range:Mid-level: $ 88,000 - 108,000Senior Level: $ 115,000 - 141,000Senior Staff Level: $ 138,000 - 154,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.MINIMUM QUALIFICATIONS for Mid-level EngineerB.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior EngineerB.S. in Engineering or Licensed Professional Engineer and 7+ years engineering experienceMINIMUM QUALIFICATIONS for Senior Staff EngineerB.S. in Engineering or Licensed Professional Engineer and 10+ years engineering experience PREFERRED QUALIFICATIONSSteam Turbine exerience required. preferablly a focus on turbine field engineering and maintenance support, and troubleshooting. Experience with turbine overhauls, inspections, long term assett management, professional engineering registration is a benefit but not required, and advanced technical degree or coursework is beneficial.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 155,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location:Hazleton, PAJob Type:Full TimeShift Available:2ndCompensation:$23.75 -$37.75/hr Benefits Information Overtime PotentialVacation & Holiday PayHealth Insurance401(k)Tuition ReimbursementLife Insurance & Short Term DisabilityEmployee Discounts Principal Accountabilities Understanding and adhering to all safety rules and regulationsMaintaining a safe and clean work environmentTroubleshooting and repairing electrical and mechanical failuresRecommending changes, modifications, or upgrades to equipment to improve machine reliability and performanceReading electrical circuit drawings and documents, and mechanical drawings and documentsDocumenting completed work, modifications to equipment, findings, and parts information as requiredExecuting assignments in a timely manner with minimal supervisionPerforming other duties assigned Required Qualifications Must be eligible to work in the united states without visa sponsorshipMust be 18 years or olderAt least one year of experience troubleshooting electrical and mechanical issues on industrial equipmentAt least one year of experience using hand tools and maintenance troubleshooting equipmentAbility to understand and communicate in English (verbal/written) Preferred Qualifications Certification in Industrial Electricity I, II, and IIICertification in Motor ControlsExperience troubleshooting with PLC’s.Working knowledge of fluid power, hydraulics, and pneumaticsPrevious experience with Precision MaintenanceOne year of experience TIG WeldingIndustrial Building MaintenanceAmmonia refrigeration experienceAmmonia certificationsAt least two years of experience working in a fast-paced manufacturing environmentExperience with root cause analysis and continuous improvementBasic computer skillsSAP Experience Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

Maintenance Technician Camden, NJ, USAReq #1138 Thursday, June 13, 2024 About Us:EMR isone ofthe world’s leading metal recycling companieswith a history spanning decades.At EMR, our employees are the heart and soul of our organization. We are committed to creating a workplace that prioritizes the well-being and safety of everyone. Our company provides a supportive and inclusive community where everyone's ideas and contributions are valued.We believe in teamwork and collaboration.Our mission is to provide our customers with efficient and reliable metal recycling services while minimizing the environmental impact of our operations. EMR recycles ten million tons of material annually, everything from beverage cans to aircraft carriers. We work with a wide variety of metals including copper, aluminum, brass, and stainless steel and can recycle it into more than 200 different types of new sustainable raw materials.EMR offers our team a competitive salary and a comprehensive benefits package, including health insurance, retirement planswith company match, wellbeing benefits, employee assistance program and more. Join us and be a part of a team that puts people first! The Maintenance Technician is responsible for maintenance upkeep across various EMR locations. Duties include performing minor repairs, painting, small construction projects, and minor electrical work. This career requires prior building maintenance experience, the ability to use maintenance and landscaping tools, and the ability work independently as well as in a team environment.II. ESSENTIAL DUTIES & RESPONSIBILITIESResponsible for maintenance across various sites.Performs maintenance duties such as minor repairs, painting, and roof patching and minor electrical work.Works on small construction projects as needed such as remodeling, and minor drywall maintenance.Responsible for landscaping and cleaning as needed.Other job duties as assigned.III. Required Skills / AbilitiesExcellent communication both written and verbal.Strong attention to detail.Ability to multitask in a fast-paced environment.Ability to work independently as well as in a team environment.Ability to use maintenance and landscaping tools.Valid driver’s license.Ability to lift up to 50 lbs.IV. Education & ExperienceHigh school diploma or GED-equivalent preferred.Previous building maintenance experience required.V. Other Job DemandsWork is generally performed outdoors in all-weather elements such as hot, cold, rain, or snow and personal protective equipment is required. Working hours may vary and evening or weekend work may be required. You may be required to lift and carry light weight EMR USA Metal Recycling provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.*E-Verify is a registered trademark of the U.S. Department of Homeland Security. This business uses E-Verify in its hiring practices to achieve lawful workforce. Other details Job FamilyUS AdministrationPay TypeHourly