Responsibility Level:The Principal Engineer is responsible to contribute to the product team through product design, testing, data analysis, and project management. The Principal Engineer will also support the manufacturing and sustaining of the product including initiating and executing design changes. All these tasks also require strong communication skills and the ability to clearly present information to engineering teammates, engineering managers, and product management.Principal Duties (as related to functional responsibilities):Maintains understanding of theories, concepts, technical principles and processes related to fluid, thermal, and other mechanical aspects of electrical panels used on commercial or industrial equipmentContributes to the on-time completion of programs and regularly reports on the status of projectsHas proficiency in mechanical design and be able to conceptualize and implement design ideas into CAD models and physical prototypesApplication of regulatory codes such as UL and CE as well as ability to learn specific regional requirements needed for global marketsWork closely with the design and manufacturing teams in generating layout concepts and system configurations that consider the best balance of cost, performance, and reliability.Coordinate and help execute test programs to validate performance and reliability of mechanical systems and componentsAnalyze, design, modify and/or troubleshoot mechanical sub-components and electrical sub-systems based on test data, simulation, and CFD resultsGenerate and review technical documentation for use within the product team and for distribution to external customersOccasional domestic and international travel (less than 10%)Teamwork and the ability to work with many teams is critical in our global product development environment. Each of these virtues must be consistently displayed with a focus on continual improvement of our team culture.Humble – willing to sacrifice self-interests for the success of the teamHungry – diligent, self-motivated, and always for looking for new opportunities to contributeSmart – able to read and interpret people and situationsRequirements:The requirements listed below are representative of the knowledge, skill, and/or ability required.BS in Engineering or related scienceMinimum 7 years of experience in a related fieldPreferred experience with CREO and 3D modeling of sheet metal and cablingProficient with organizing and processing large amounts of dataExperience with product development and sustaining of configurable systemsAbility to mentor and train other engineers#LI-SI1#LI-Onsite#mango

What you will do Johnson Controls has a phenomenal opportunity for a Staff Embedded Software Engineer to join our team located in New Freedom, PA, and contribute to the design and development of our cutting-edge Chiller products! Candidates must be commuting distance to New Freedom, PA, or able to relocate.As a Staff Embedded Software Engineer, you will have the opportunity to design, develop, and implement embedded software solutions for our products. You will work closely with cross-functional teams, including hardware engineers, product managers, and quality assurance teams, to deliver high-quality software that meets performance and reliability standards. This position is ideal for an individual looking to take their career to the next level in a challenging and rewarding environment!How you will do it Design, develop, and implement embedded software for various applications and platforms.Collaborate with hardware engineers to define system architecture and specifications.Write efficient, maintainable, and reusable code in C/C++ or other relevant programming languages.Conduct code reviews and provide constructive feedback to ensure adherence to best practices and coding standards.Develop and execute test plans to validate software functionality and performance.Troubleshoot and debug embedded systems, identifying and resolving software and hardware issues.Mentor and guide junior engineers, promoting knowledge sharing and best practices within the teamWhat you will needRequired Bachelor’s degree in Computer Science, Electrical Engineering, or a related field.10+ years of experience in embedded software development.Proficiency in programming languages such as C/C++, Python, or similar.Strong understanding of embedded systems architecture and real-time operating systems (RTOS).Experience with hardware/software integration and debugging tools (e.g., oscilloscopes, logic analyzers, JTAG).Familiarity with version control systems (e.g., Git) and software development methodologies (Agile, Scrum).Preferred Familiarity with wireless communication protocols (e.g., Bluetooth, Wi-Fi, Zigbee).Knowledge of embedded Linux or other operating systems.Experience in developing automated testing frameworks and strategies.Familiarity with equipment communication protocols (e.g., BACnet, CAN, Modbus).#mango

What you will do:The Staff Acoustic Engineer is a Subject Matter Expert (SME) in sound and vibration for HVAC equipment with a focus on data center chiller applications. In this role, you will provide knowledge and insight as you review and interpret customer requirements.You will provide sound and vibration technical support on a variety of projects ranging from product development to job specific sales and field support; working collaboratively with product engineering, product/project management, marketing, product technical services, and sales teams.How you will do it:Engage regularly with customers and product teams to gain understanding of field noise requirements, local ordinances, community comfort and annoyance data, and sound testing specifications.Help drive product development efforts toward lower noise solutions to satisfy customer requirements.Provide testing support of air-cooled chillers utilizing AHRI standards, assisting with testing and data processing.Perform site evaluations to document in-situ chiller sound performance and further develop outdoor noise models to aid in customer design decision making.Review patents and research papers to understand state of the art and provide creative noise control solutions to challenges that arise during new product development.Ability to organize and participate in testing efforts (testing for internal use and 3rd party witnessing) including data analysis, generating reports, and communicating results to diverse audiences.Participate in design reviews to ensure best design practices are followed and alert product team to any sound and vibration risks.Assist with developing equipment sound ratings for publication by Sales and Marketing.Lead continuous improvement efforts on existing products and test procedures.Assume sound and vibration responsibility within cross-functional engineering teams.What we look for:RequiredBachelor’s Degree in Engineering or related science.8-10 years’ related experienceTraining in the field of acoustics and vibration or experience in HVAC designExcellent verbal and written communication skillsPreferredAdvanced degree in acoustics or degree with a focus in acousticsConsulting experience in acoustics or noise controlKnowledge of municipal noise ordinances and regulation#LI-SI1#LI-Onsite#mango

What you will doThis position is responsible for managing the technical staff conducting testing operations at the JADEC facility. The operations consist of multiple test stands serving multiple JCI business units (Chillers, AHU, Marine/Navy). Test labs operate 3 shifts and employ 70+ operators, test engineers and technicians.How you will do it Lead and manage lab engineering team to support the execution of all testing in the lab balancing the needs of the customers with the available resourcesManage necessary operational metrics to assure maximum efficiency and effectiveness of the operationWork with the test lab customers, that primarily consist of product development engineers, to achieve excellence in testing quality and on time delivery.Implementation and prioritization of operational improvement of testing for greatest impact relative to investment. Support achievement through continuous interaction of activities with the engineering team membersEffectively use technical expertise with industrial chillers and hydronic systems to assist the test engineering team with solving complex issues and facilitate the sharing of knowledge across the team.Create and expend automation opportunities to increase overall utilization of facilities as well as efficiency of operationsDrive, and participate with creation, of standard procedures, test standards and processes.Development of new procedures, processes, and resources as necessary to provide more efficient, accurate, or advanced testing services.Test lab team interacts with many other internal departments in the Chiller business. This position is responsible to ensure strong connection with the leaders of these other teams and assist in escalation of issues that threaten productivity or on-time completion of test tasks or product development activities. These departments primarily include:Product Development Engineering Team(s)Advanced Development & Technology Engineering TeamsProgram/Project ManagementJCFS Engineering Team(s)Support the planning and execution of chiller and component testing by ensuring the following actions are taken:Participation in the development, receipt, and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support or equivalent groups to agree upon and issue test plans.Work within the test engineering team to schedule tests and required resources.Provide oversight and input to test technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.What we look for BS required; MS preferredA minimum of eight (8) years’ experience managing HVAC/R equipment development, servicing or testing, with a high level of understanding of HVAC/R systems, concepts, and diagnostics.Candidate must be well organized and capable of managing numerous competing prioritiesAbility to work under minimal supervision and take ownership of assignments, which are carried out collaboratively within lab team and customer groups.Experience building and leading teamsExcellent people management & communication skills with ability to develop and maintain professional relationshipsStrong organization and problem-solving experienceAbility to guide or mentor less experienced technical personnel within teamStrong group communication skills, presentation skillsExcellent computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail#LI-SI1#LI-Onsite#mango

What you will doJohnson Controls has a phenomenal opportunity for a Senior Application Engineer based in our Engineering Center of Excellence in New Freedom, PA. You will have the chance to support the sale of Screw and Scroll Chiller products through the JCI HVAC System Branches as well as JCI sales/marketing personnel in export markets. This role has a strong impact on the success of the Data Center Chiller Solutions business. The support provided is primarily executed through direct assistance of the branch office personnel by providing pre-sale technical support, answering system level product application inquiries, generating special quotations, and supporting order execution via interactions with the Order Management and Contract Engineering teams. Communication and integration with Chiller Solutions product team activities is required to track new product development and acquire/retain knowledge of all assigned products both current and past products still in their life cycle. How you will do it Daily interaction with field sales personnel providing guidance on the application and installation of assigned Chiller Solutions equipment in HVAC systems.Interaction with field personnel must include systems applications advice, creative solutions to unique customer needs and use of competitor knowledge to create advantages.Participate in the development of tools and documentation to support field sales as well as automate processes to support common inquiries.Be proficient in the use of in-house engineering systems and documentation to aid in responding to inquiries for product details.Continuously evaluate emerging technologies and industry trends to recommend innovative solutions for enhancing the reliability, scalability, and sustainability of chiller systems in data center applications.Design and customize chiller systems tailored to data center environments, ensuring optimal cooling efficiency and energy utilizationAssist and counsel sales personnel in resolving equipment/job/code challenges.Effectively communicate and follow up with sales personnel, design engineers and product management teams to ensure customer requirements are clearly understood and responses are efficiently executed.Obtain supplier quotations in order to communicate cost and lead time for special product requests.Demonstrate a high level of knowledge of products (JCI and competitor’s), market conditions and direction, environment (external influences of industry organizations and governmental regulations), technologies and their effect to the business.What you will needRequired Bachelor’s degree7+ years ofexperience preferably in the HVAC industry or a related Chiller Technology field. Knowledge of theprinciples of refrigeration systems and associated equipment is required. Up to 20% travel is needed for factory visits, customer site visits and field visits related to training.#mango

We are seeking an experienced and dynamic Principal Product Industrialization Engineer to contribute to our Industrialization/DFM team, focusing on product industrialization, design for manufacturing, and manufacturing engineering. The ideal candidate will have a strong background in manufacturing methods and proven leadership skills to drive the successful transition of products from design to production and experience in and interacting with product development teams. This role requires a strategic thinker who can collaborate with cross-functional teams to optimize manufacturing processes to meet production goals, ensure product quality, product cost, and product performance.The Principal Product Industrialization Engineer will be responsible for being involved throughout the entire product development or engineering change (EC) lifecycle, from initial concept through manufacturing and launch. This position demands a hands-on approach to problem-solving, process improvement, and the implementation of best practices in design and manufacturing engineering. The successful candidate will demonstrate the ability to manage complex projects and maintain a focus on continuous improvement to achieve operational excellence.Responsibilities:Oversee product industrialization processes, ensuring smooth transition from design to full-scale manufacturing.Remain well versed in manufacturing techniques (Industrial, Mechanical, Manufacturing Engineering) for pipe bending, welding and brazing, sheet metal fabrication, machining and assembly operations; both within JCI factories and in the world at large.Collaborate with design, R&D, and production teams to develop and implement design for manufacturing (DFM) strategies.Ensure released information for manufacture is aligned to global manufacturing standards and is up to date with manufacturing best practices.Oversee BOM transformation from EBOM to MBOM and ensure the accuracy, connection, and completeness of bothDevelop and maintain factory capabilities matrix for use by design and engineering teams to ensure designs fit into factory tooling & methods.Contribute to the definition and subsequent fulfillment of the definition of done for both major projects and minor changes in a timely and cost-effective mannerPrepare data and product comparisons to support design for manufacturing workshops, make/buy decisions on components, return on investment for equipment, or other applicationsParticipate along with Manufacturing Engineering on Kaizen events and quality concerns within factory environments to represent the improvements needed from the design teamProvide on-site production support as a representative of the product design key to project timelinesUnderstand material process flow and process flow mapping and be fluent in process definition and documentation methodsScout, demo, and introduce advanced manufacturing technologies and automation to enhance chiller production.Maintain a strong focus on health and safety standards, ensuring a safe working environment for all team members.International travel to factories in support of project and improvement efforts.What we look for:Bachelor's Degree (B.S.) in Industrial or Mechanical Engineering or related field from an accredited four-year College or University is required. Master's degree preferred.Minimum 7 years of experience in product manufacturing or development engineering with a very high percentage of time & experience on the factory floor in product and process development.Able to identify key elements requiring control plans in support of Manufacturing EngineeringExperience reviewing drawings, schematics and models and providing helpful feedback in design review situationsExcellent communication and interpersonal skills, with the ability to effectively interact with cross-functional teams and stakeholders and be able to address the differing needs of design teams, factories, and supply chains.Strong problem-solving skills and the ability to make informed decisions based on data and analysis.Strong interest and knowledge of industry standards and best practices in manufacturing and design for manufacturing.Working knowledge of PLM, 3D modeling and ERP/MES systems softwareExperience working in an agile project management environment a plusSpanish language proficiency is preferred but not required#LI-SI1#LI-Onsite#Mango