South Heights, PA 15081 • (15.3 miles) • Full Time • 10/18/2026

We’re seeking a future team member for the role of Senior Vice President, Treasury and ALM to join our Corporate Treasury team. This role is located in Pittsburgh – Hybrid. In this role, you’ll make an impact in the following ways: Provides senior-level expertise and thought leadership in Asset Liability Management (ALM), with a primary focus on Interest Rate Risk in the Banking Book (IRRBB), balance sheet analytics, and Treasury risk management strategy. Leads the interpretation and evolution of modeling, forecasting, and scenario analysis related to assets, liabilities, earnings sensitivity, and economic value exposure to support balance sheet decisions and risk management. Identifies opportunities to enhance ALM and IRRBB analytics, including methodologies, assumptions

Short Creek, WV 26058 • (28.3 miles) • Full Time • 10/18/2026

Clean Harbors in Wheeling,WV is seeking an Environmental Field Chemist (CleanPack Chemist) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for assisting with lab packs within customer facilities, household hazardous waste (HHW) collections and lab moves. This is a customer facing position, working at customer sites daily . The Environmental Field Chemist are (NOT) laboratory-based Chemist. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is o

Cranberry Township, PA 16066 • (19.9 miles) • Full Time • 10/18/2026

Description Leidos is seeking a Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare mate

Pittsburgh, PA 15289 • (33 miles) • Full Time • $90,000 to $140,000 / yr • 10/18/2026

Structural Engineer, Building Design Consulting Location: Pittsburgh, PA Job Type: Full-time Pay: $90,000 to $140,000 per year Design schools, shopping centers, and commercial buildings across Greater Pittsburgh at a growing consulting firm where senior engineers mentor you and you help lead others. Must-Haves Bachelor's degree in Civil Engineering with a structural concentration EIT certification , with a PE license or ability to obtain one in a reasonable timeframe Strong knowledge of building codes and structural design standards Strong organizational, analytical, and problem-solving skills Strong written and verbal communication with clients and project teams What You'll Do Design structural systems for commercial, industrial, institutional, and residential projects Perform analysis an

Warren, OH 44483 • (43.8 miles) • Full Time • $135,200 / yr • 10/22/2026

Benefits: 401(k) matching Bonus based on performance Dental insurance Health insurance Paid time off Profit sharing Vision insurance Who We AreAuris Noble is a vertically integrated recovery and refining company that manages high-value critical and strategic materials generated by aerospace, defense, telecommunications, advanced manufacturing, and other industries. We develop science-driven solutions for recovering and upscaling complex and previously underserved material streams containing precious, refractory, rare earth, and strategic metals. Our capabilities span laboratory development, analytical chemistry, pilot operations, commercial-scale chemical processing, thermal treatment, metal recovery, and production of refined materials. Auris Noble operates multiple facilities and produce

Clayton, OH 44460 • (25 miles) • Full Time • $70,000 to $105,000 / yr • 10/22/2026

Heavy Equipment Mechanical Systems Engineer Location: Salem, OH 44460 Compensation: $70,000 – $105,000 per year Employment: Full-Time, Permanent Job ID: #26-00620 Overview Integrity Technical Services, Inc. is collaborating with a long-standing manufacturing leader in the Salem area to hire a hands-on Mechanical Engineer who thrives at the intersection of product development and field execution. You’ll transform concepts into robust solutions for heavy industrial material handling systems and advanced lifting equipmentthen see them through on the shop floor and at customer sites. A Day in the Life Engineer complex machinery: Develop, refine, and optimize designs for heavy equipment, conveyors, and specialized lifting systems. Model and analyze: Produce precise 2D layouts and sophisticated

Youngstown, OH 44513 • (25.7 miles) • Full Time • 10/22/2026

PrincipalMaterialsEngineer, High-Temp Composites About ContinuousComposites: At Continuous Composites Inc., we are redefining what is possible in advanced manufacturing. Our unique CF3D® technology for composite 3D printing opens new frontiers in Aerospace and Defense. We thrive on innovation, rapid iteration, and empowering every team member to take initiative and drive breakthrough solutions. Our mission is to transform industrial manufacturing through pioneering research, creative problem-solving, and relentless execution. PositionSummary: TheContinuous CompositeEngineering Teamis seeking a PrincipalMaterialsEngineer to support in-houseeffortsto develop High Temperature Compositesfor real world applications. In this role,youwilllead the MaterialsTeam to develop and define themethod to c

Youngstown, OH • (30 miles) • Full Time • 10/22/2026

Municipal Engineering Project Manager ms consultants, inc. Youngstown, Ohio Are you an experienced municipal engineer who enjoys leading projects, building trusted client relationships, and helping communities plan for their future? At ms consultants, inc., we’re looking for a Municipal Engineering Project Manager to join our team in Northeast Ohio. This is an opportunity to take a leadership role in delivering impactful municipal infrastructure projects while helping expand our client partnerships and municipal engineering services throughout Northeast Ohio and Western Pennsylvania. The successful candidate will play a key role in managing projects from planning through design and implementation while serving as a trusted advisor to municipal clients. This position combines technical proj

Brookfield Center, OH • (38.7 miles) • Full Time • 10/21/2026

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-

Youngstown, OH • (30 miles) • Full Time • $20.00 to $30.00 / hr • 10/21/2026

International Steel & Counterweights is seeking an experienced CNC Programmer / Machine Shop Manager to oversee daily operations at one of our manufacturing facilities. This is a hands-on leadership position responsible for CNC programming, workforce coordination, production scheduling, material readiness, quality, and safety. The successful candidate will ensure employees have the programs, materials, tooling, and direction needed to keep production moving and meet customer requirements. We are looking for someone who takes ownership of the facility, communicates clearly, and can adjust priorities as production needs change. Key Responsibilities · Develop, edit, and troubleshoot CNC programs using engineering drawings and job specifications. · Ensure CNC operators have accurate programs,

Youngstown, OH • (30 miles) • Full Time • 10/21/2026

Company Description AWP Safety is North America’s leading traffic control specialist. Our team of 9000+ professionals helps secure 2,000+ work zones every day – ensuring customer crews, drivers, and our teams get home safely. We protect those who operate, maintain, and upgrade infrastructure in the energy, broadband, and transportation sectors and provide traffic control for major events like the Super Bowl and Boston Marathon. Since our founding in 1981, we have served customers through the talent of extraordinary team members committed to customer focus, growth, valuing each other, safety and quality, and a sense of urgency. Job Description POSITION SUMMARY The Field Supervisor will uphold the core values of Ownership, Trust, and Teamwork. This position will have a passion for safety and

Youngstown, OH 44502 • (28.9 miles) • Full Time • 10/20/2026

Large Manufacturing Plant has a need for a Process Engineer. This is a direct hire role with a full benefits package Perform process optimization studies, plant trials, and technical evaluations of existing chemical manufacturing processes. Develop process design recommendations and engineering scope for process improvements and capital projects. Perform engineering assignments supporting larger capital, process improvement, and operational initiatives. Evaluate technical problems, select appropriate engineering methods, and develop practical design recommendations. Participate in Process Hazard Analyses (PHA) and other Process Safety activities associated with process changes and plant operations. Prepare engineering calculations, technical documentation, design information, and other pro

North Jackson, OH 44451 • (34 miles) • Full Time • $90,000 to $110,000 / yr • 10/20/2026

Site Reliability Maintenance Engineer This is an exciting new position meant to be a key player in our newly created Reliability Program. The role responsible for identifying and managing reliability improvements to steel producing equipment and facilities, minimizing downtime, and ensuring operational efficiency through predicative and preventative maintenance programs. The Reliability Engineer position is located at the plant will report to the Preventative Maintenance Engineer designated to each location. This position is available at two different locations - Dunkirk, NY & North Jackson, OH. Responsibilities · On a regular basis, will access and search the CMMS (Maximo) and other equipment databases for information as needed · Analyzes and updates engineering standards based upon equip

Clayton, OH 44460 • (25 miles) • Full Time • $95,000 to $125,000 / yr • 10/20/2026

Senior Application Engineer - Rolling Mill Equipment Summary: The Senior Application Engineer for the Rolling Mill product line will provide technical leadership and support during the development of solutions for custom designed equipment for customers in the metal rolling industry. The Senior Application Engineer will work closely with customers, Sales, Engineering, Manufacturing, and Project Management to understand application requirements and develop equipment concepts, technical specifications, layouts, cost estimates, and proposals. Key Responsibilities: Review customer inquiries, RFQs, specifications, drawings, and technical requirements. Work directly with customers as well as internal Sales and Engineering personnel to fully understand equipment needs, production goals, process r

Niles, OH 44446 • (37.6 miles) • Full Time • $60,000 to $650,000 / yr • 10/20/2026

Benefits: 401(k) Bonus based on performance Competitive salary Dental insurance Free food & snacks Health insurance Home office stipend Paid time off Relocation bonus Signing bonus Training & development Vision insurance Job Description Perform data validation Troubleshoot hardware and software issues Learn and support the automation process Tune and calibrate machinery Monitor machine operations and data processing status ?? /?/?? ?? / ?? ?? /?? ?? ??? ?? Qualifications Open to all majors from four-year universities Bachelor’s or Associate’s degree in Electronics, Electrical Engineering, Mechanical Engineering, or related fields (Engineering degrees preferred) 0–5 years of experience in manufacturing Proficiency in MS Office programs Ability to communicate in both English and Korean (100%

Warren, OH 44483 • (43.8 miles) • Full Time • 10/20/2026

Electrical Engineer Warren, Ohio Company Overview: Ajax Tocco Magnethermic (ATM), a subsidiary of ParkOhio , traces its roots back to the 1800s and has a rich history of excellence in induction heating and melting solutions. The present company was formed in 1959 when the Magnethermic Corporation acquired the assets of Ajax Electrothermic Corp. combining their expertise and capabilities. Position Summary: The Electrical Engineer supports engineering functions related to Induction Power Supplies for customer orders and assigned projects with limited supervision. Responsibilities may include preparing electrical schematics, conducting power electronic circuit analysis, assisting with field service, and contributing to product testing and development. Job Duties: - Prepare electrical schemati

Youngstown, OH 44512 • (25.5 miles) • Full Time • 10/19/2026

At Dearing Compressor & Pump, our people power everything we do. They’re not just employees, they’re the heartbeat of our success and the driving force behind our progress. That’s why we treat every team member like family. With a strong, collaborative culture, and a true people-first approach, Dearing isn’t just a place to work, it’s a place to grow, make an impact, and thrive. POSITION SUMMARY Performs all aspects of Application Engineering work to support the submittal of client proposals. Works directly with customers, vendors and Dearing sales, engineering and manufacturing personnel. The Applications Engineer will participate in sizing, estimating and generating proposals for natural gas compressor packages and related components for the oil and gas industry, primarily the domestic s

Youngstown, OH 44510 • (32 miles) • Full Time • 10/19/2026

Make an Impact With Us At Vallourec, quality is built into everything we do from the way we operate to the way we serve our customers. We are seeking a Quality Engineer (QE) to strengthen our plant-level quality processes, drive continuous improvement, and ensure our products consistently meet customer and industry standards. This role is ideal for a hands-on problem solver who enjoys collaborating across teams and making meaningful improvements on the shop floor. Your Role at a Glance As a Quality Engineer, you will be a key contributor within the plant’s Quality organization, partnering closely with Process Engineering, Operations, and OpEx to improve performance and customer outcomes. Embed safety into daily work routines and support engineered solutions that enable “fail-safe” operatio

Alliance, OH 44601 • (37.1 miles) • Full Time • 10/18/2026

Position Summary For over 150 years, Morgan has led the way in transforming the metals industry. We don’t just build world-class material handling systemswe create safer, smarter, and more efficient solutions that empower our customers and elevate our communities. Be part of a company that is driven by a passion for innovation and a commitment to sustainability. Due to continued growth, we are seeking a full-time Engineer to join our Site Services team in Alliance, Ohio. The Site Services Engineer is responsible for the design, implementation, installation, and ongoing support of material handling systems, with a focus on overhead cranes. This role combines mechanical engineering expertise with hands-on field service to deliver reliable, high-performing systems while ensuring customer sati

Youngstown, OH • (30 miles) • Full Time • $90,000 to $120,000 / yr • 10/17/2026

Large Manufacturing Plant has a need for a Process Engineer. This is a direct hire role with a full benefits package Perform process optimization studies, plant trials, and technical evaluations of existing chemical manufacturing processes. Develop process design recommendations and engineering scope for process improvements and capital projects. Perform engineering assignments supporting larger capital, process improvement, and operational initiatives. Evaluate technical problems, select appropriate engineering methods, and develop practical design recommendations. Participate in Process Hazard Analyses (PHA) and other Process Safety activities associated with process changes and plant operations. Prepare engineering calculations, technical documentation, design information, and other pro

Warren, OH 44481 • (42.5 miles) • Full Time • 10/16/2026

Foxconn System LLC Job Description – Operational Excellence (OpEx) Engineer FSLA Status: Exempt Location: Lordstown, OH Reports To: FPW Manager Primary Function: As a key member of the Foxconn Production Way (FPW) team, you will be responsible for driving Operational Excellence through engineering and Lean methodologies, Policy Deployment, standardization, risk management, data-driven performance improvement, and continuous improvement across the organization. Duties and Responsibilities: Support the development, implementation, and continuous improvement of the Foxconn Production Way (FPW) across the organization using Lean methodologies and engineering principles. Lead and support Policy Deployment activities, including strategic objective alignment, KPI development, performance monitori

Warren, OH • (42.2 miles) • Full Time • 10/16/2026

Company Description Manufacturing Application Engineer Job Type: Full-Time Work Location: Onsite (Travel up to 30%) Salary: $70K-90K DOE Job Summary We are seeking a Manufacturing Application Engineer to support IT and manufacturing application systems for EV battery production facilities across North America. This role combines IT knowledge with manufacturing operations to support factory automation, troubleshoot production systems, and improve manufacturing efficiency. The ideal candidate has experience with manufacturing systems, enjoys solving technical problems, and is eager to work in a fast-paced production environment. Job Description Analyze and troubleshoot IT and manufacturing application issues for EV battery plants. Monitor and maintain manufacturing systems to ensure stable a

Youngstown, OH 44515 • (32.4 miles) • Full Time • 10/15/2026

Job Title: Sr. Metallurgist Process Engineer Location: Austintown, Ohio Type: Contract Compensation: 120-130K Contractor Work Model: Onsite – onsite Hours: 40.0 Responsibilities Direct and oversee casting and metallurgical programs to enhance operational capabilities, production processes, and product innovation. Establish and refine procedures to meet customer quality standards, reliability, and delivery timelines in a safe and economical manner. Serve as the primary technical authority on metallurgy and casting operations, employing analytical and data-based approaches to address complex challenges. Collaborate across departments including Production, Engineering, Supply Chain, and Quality Assurance, with direct involvement on the production floor. Engage with clients and suppliers while

Wheatland, PA 16161 • (36.1 miles) • Full Time • 10/15/2026

Mechanical Engineer – Product Design, Manufacturing & Automation Company: Thompson Fabrication- Wheatland, PA Position Summary: Thompson Fabrication is seeking a hands-on Mechanical Engineer to improve the design, quality, manufacturability, and performance of our roll-off containers, front-load containers, compactors, and specialty waste equipment.This role combines product engineering, CAD and drawing management, manufacturing process improvement, and automation. The successful candidate will work closely with production employees, purchasing, sales, equipment suppliers, and company leadership to build better products, increase capacity, and deliver measurable improvements in productivity and cost. Key Responsibilities: Product Design and Engineering Improve existing designs for durabili

Alliance, OH 44601 • (37.1 miles) • Full Time • $102,000 to $110,000 / yr • 10/14/2026

Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities.With our cultural vision, we place our core values at the heart of everything we do: safety , ambition , optimism , reliability , ownership , diversity , & respect . Wieland is hiring a Product Engineer. The Product Engineer is responsible for leading the technical

Youngstown, OH 44509-4025 • (30 miles) • Full Time • 10/13/2026

About Company: Are you looking for a great place to work? If so, check out Northern States Metals in Youngstown, OH. We are a family-owned manufacturer of Extruded Aluminum Components with 50 years of service, where we have built our reputation for quality through our commitment to our workers. Our safety record is exemplary and the work environment is laid back and supportive of work-life balance. Apply your technical skills to enhance your career growth within our organization and join our family. These position are direct-hire with competitive wages, PTO, Health Benefits, Life/Disability Insurance and 401K w/match options. We work 4-10 hour days (Monday-Thursday); we offer, Day shift (5am-3pm) and Afternoon shift (3pm-1am). About the Role: The CNC Programmer/Supervisor plays a crucial r

Canfield, OH 44406 • (27.1 miles) • Full Time • $90,000 to $130,000 / yr • 10/13/2026

Mechanical Engineer for Industrial Machine Design: Dunaway is looking to hire a highly skilled, mid to senior level industrial Machine Design Engineer with 3D modeling (Solidworks) and FEA skills, who can design industrial equipment related to the aluminum extrusion industry. This includes billet loaders, extrusion presses, stems, containers, tie rods, handling systems, etc. You must be able to plan, design, and coordinate the integration of new extrusion machinery and equipment into manufacturing processes with a high level of proficiency. This position must be capable of designing and troubleshooting complex mechanical functions while working independently and cohesively with your teammates. This position will be the main contact for all engineering for the company and will report direct

Campbell, OH 44405 • (27.9 miles) • Full Time • 10/11/2026

Title : Mechanical Engineer – Engine Assembly and Test Location : GE Transportation (A Wabtec Company) - Grove City, PA Job Description : Phoenix Technical Solutions is looking for a Factory Support Engineer to work with their GE Transportation customer. The engineering position is responsible for providing technical support for diesel engine production. These efforts include maintaining and creating manufacturing instructions, supporting tooling and manufacturing improvements to assure the proper assembly and manufacture of diesel engines and components. Responsibilities : - Site point of contact for supporting assembly and testing of medium speed diesel engines. - Interface with respective customer departments to ensure compliance with the engineering specifications as outlined by the En

Hermitage, PA 16148 • (38.2 miles) • Full Time • $20 to $25 / yr • 10/11/2026

G.W. Becker, Inc., is seeking a detail-oriented Mechanical Design Engineer Assistant to support our engineering team in meeting customer needs. The ideal candidate will have experience in 2D and 3D CAD design, technical documentation, and project execution. This is a full-time position with regular hours of work from Monday to Friday, 8:00 a.m. to 5:00 p.m. on site only, remote work unavailable . Essential Functions: * Create 2D and 3D designs using CAD software for visualizing and planning manufacturing processes * Prepare detailed shop drawings that serve as blueprints for manufacturing and assembly * Review and validate documentation before it is released to production, ensuring accuracy and compliance with standards * Input and manage bills of materials within ERP systems * Organize an

Youngstown, OH 44503 • (30.1 miles) • Full Time • 10/9/2026

Data Engineer About America Makes America Makes is the Nation’s leading public-private partnership for Additive Manufacturing technology and education. Our members from industry, academia, government, workforce, and economic development organizations, work together to accelerate the adoption of AM and the nation’s global manufacturing competitiveness, focusing on three core missions - Technology Development, Education and Workforce Development, and Ecosystem. About the role and team As a data engineer, you will be part of a diverse team that is collaborating to grow and mature adaptive and additive manufacturing supply chains. The America Makes Institute views data and data sharing as a key component to communicating the outcomes and impacts of our efforts. Data is critical to the value of

Youngstown, OH 44512 • (25.5 miles) • Full Time • 10/3/2026

Preparation of engineering permits, plans, & technical specs for various projects in multiple states Effectively process multiple permitting entitlements across a variety of government agencies Provide engineering services related to construction activities and project certifications PE license/stamp required; NCEES Records Program Registration a plus Experience with AutoCAD/Civil 3D preferred; working knowledge of MS Office, Excel, and Project

Hermitage, PA 16148 • (38.2 miles) • Full Time • $75,000 to $100,000 / yr • 10/2/2026

About the Opportunity We are seeking an innovative R&D Engineer to play a key role within a Product Design team, leading the development and commercialization of new packaging products from initial concept through production launch. This is an excellent opportunity for an engineer who enjoys combining hands-on product design, AutoCAD/SolidWorks, manufacturing, tooling, and direct customer interaction . You will transform customer concepts and requirements into manufacturable products while ensuring designs meet performance, quality, cost, and production objectives. Key Responsibilities Lead new product development from concept through commercialization and production launch . Create detailed 2D engineering drawings and 3D models using AutoCAD and SolidWorks . Strong AutoCAD and SolidWorks

Canfield, OH 44406 • (27.1 miles) • Full Time • 9/30/2026

Title: Mechanical Engineer Shift: Monday to Friday, no remote work Salary: $110,000 - $130,000+ dependent on experience, plus profit sharing Mechanical Engineer Role: Our client is seeking a Mechanical Engineer to provide engineering design and technical support. This position exists to deliver a full range of technical services and solve complex engineering problems for clients worldwide. Mechanical Engineer Responsibilities: Work within project schedules and deadlines Review and remain familiar with approved design criteria and codes Review project scope to clearly define what deliverables will be Create and review calculations specific for the design Prepare reports outlining design criteria or analysis of equipment Interact and talk with clients to review project status or deliverables

Hubbard, OH • (33.3 miles) • Full Time • 9/29/2026

Engineered Wood Products Designer – Hubbard, OH Build your career at Tri-State! Tri-State Forest Products is a family owned and operated business. Tri-State is the leading wholesale building materials distributor in the Mid-West with 10 locations in Ohio, Indiana, Michigan, Kentucky and Tennessee specializing in engineered wood products. For over 30 years we’ve been providing our brand of personal service accompanied with high quality products to the Tri-State market areas. If you want to feel appreciated and valued while working with a great team, Tri-State is the place to be. Job Summary: The EWP designer position is a full-time time position working at our Hubbardbranch . They design residential and light commercial engineered wood floor and roof systems. This designer will work closely

Hermitage, PA 16148 • (38.2 miles) • Full Time • $80,000 to $110,000 / yr • 9/29/2026

Overview The Data Analytics Engineer supports the enterprise data and analytics platform for D365 and connected operational systems. The role will help build and maintain Microsoft Fabric, data pipelines, semantic models, Power BI reporting, operational analytics, and AI-enabled solutions. This role is well suited for an early-career professional with strong analytical and technical aptitude, curiosity, ownership, and a willingness to learn and grow into broader responsibility for enterprise data, analytics, and AI capabilities. This position is expected to collaborate across IT, business teams, implementation partners, and other stakeholders. Occasional after-hours and weekend work may be required to support planned system releases, cutovers, maintenance activities, and critical productio

Grove City, PA • (39.1 miles) • Full Time • 9/29/2026

Job Description Who will you be working with? The Engine & Power Solutions Technology team’s Vision is to create innovation with purpose. We are at the heart of Wabtec’s decarbonization journey. We create solutions that matter to the world & our business. Mission: “We deliver robust leading-edge Engine, Turbocharger, Fuel Cell & Cooling Systems technology. We make it real. We drive competitive advantage. Measure us on added value; we help the business to grow and win we compete & win.” How will you make a difference? The Lead Engineer will have technical ownership of engine wiring harnesses for internal combustion engines. Responsibilities include component design and design validation, supporting cost reduction initiatives through alternate sourcing and remanufacturing process optimizatio

Youngstown, OH 44501 • (30.1 miles) • Full Time • $1 to $99 / yr • 9/28/2026

A reputable engineering firm is seeking a Senior Water/Wastewater Engineerto join their growing team in Youngstown! This is a hybrid position. Responsibilities: Collect/review data, perform calculations, prepare contract documents to assist with the design Assist project team on preliminary/final design documents using AutoCAD Civil 3D/Revit Assist with preparation of preliminary engineering design reports/ studies Work on design projects involving treatment process and hydraulic analysis, equipment selection and layout for either water or wastewater treatment facilities Ensure compliance with environmental regulations Requirements: Bachelor’s Degree in Civil Engineering or other relevant field 5+ years of experience PE License Water/wastewater treatment experience preferred Experience wit

Youngstown, OH 44509 • (31.5 miles) • Full Time • 9/26/2026

Description: AccuForm Precision LLC, a CNC machine shop, is seeking an experienced CNC Programmer to join our engineering team. AccuForm is recognized for machining high-value, complex, multi-sided castings. The ideal candidate will possess strong experience in 4-axis and 5-axis CNC programming and be proficient in creating designs and applications using CAD software. Experience designing machining applications and CNC programs using CAM software is necessary. This role is crucial in ensuring operational efficiency, enhancing productivity, and contributing to the overall success of the company. AccuForm's culture is focused on teamwork and character where an employee's value is recognized and appreciated. Why AccuForm Precision? We have an exceptional, collaborative team! AccuForm values a

Pittsburgh, PA • (31.8 miles) • Full Time • 10/18/2026

The Veteran’s Administration is conducting Electronic Health Record Modernization (EHRM) infrastructure upgrades across Tennessee Valley Healthcare System, Nashville and Albion Street VA Clinic (CBOC). GCC is providing comprehensive program of Construction Services including Project Engineering, Planning, Scheduling, and Value Management Assessments, Safety Compliance Reviews, Monitoring and Testing Compliance, Record Keeping, Cost Estimating /Budget Control, and Change Management Documentation Management. The services include Quality Assurance Monitoring, and monitoring a contractor’s adherence to standards to meet the specifications and to avoid deficiencies in the work. Other requirements include the work performed daily, performing weekly and monthly reviews and reports, change order p

Shippingport, PA • (5.3 miles) • Full Time • 10/14/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Senior Project Manager to lead a large project or multiple project efforts, which may include subcontractors, high dollar value material content and multiple resources w

Pittsburgh, PA 15205 • (26.3 miles) • Full Time • 10/6/2026

Job Summary The Electrical Commissioning Supervisor is responsible for planning, developing, and executing electrical commissioning activities for power generation, industrial, renewable energy, LNG, and balance-of-plant facilities. The role leads electrical testing and commissioning technicians, develops energization procedures, coordinates vendor and contractor activities, and supports the Commissioning Manager in safely bringing electrical systems into service. Essential Functions Actively supports the Company’s commitment to safety and its “Core Values.” Represents the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.” Develop detailed electrical energization, shutdown, and restoration procedures. Lead medium-voltage an