Description: Milton Hershey School (MHS) is a tuition free, home, and private school for over 2,100 Pre-K through 12th grade students. Founded in 1909 by Milton and Catherine Hershey, the lives of more than 12,000 students have been positively transformed through MHS’s high-quality career-focused education, nurturing home life, and extensive extra-curricular opportunities. MHS is currently seeking full-time Maintenance Technicians II – HVACR/Plumber to join the team. This position’s primary focus will be providing heating and cooling service, repairs, and maintenance for various residential and commercial facilities. Additionally, this position requires proficiency and diagnostic abilities in all mechanical trade disciplines including, but not limited to plumbing, residential & commercial appliance repairs and minor electrical repairs. The incumbent is required to demonstrate journeyman level skill through successful completion of a written and practical exercise. All work is to be performed in accordance with all state, local and federal codes, and regulations, and may require licensing. Work assignments will be based on the overall skills of the Technician; however, this position is required to support any of the mechanical trade disciplines. Some of the required skills and abilities are: Demonstrated knowledge in the installation, repair and maintenance HVAC/R, plumbing, and electrical systems.Demonstrated troubleshooting ability with respect to electronic controls (prior experience with a Building Automation system is a plus).Demonstrated ability to utilize hand tools, power tools and analytic tools (all tools are provided by MHS).Physical ability to perform all aspects of the job, including the ability to lift 50 pounds.Ability to utilize electronic devices (i.e. tablet) and software for work order management and communication.Ability to work independently and as a team. The work schedule is year-round, full-time, flex schedule with forty (40) hours per week with a minimum of two (2) consecutive non-workdays. A flex shift employee works a combination of the shift times listed below to be scheduled as determined by the needs of the school. Standard hours of operation may change due to seasonal or programmatic changes. 7:00 a.m. – 3:30 p.m. 3:00 p.m. – 11:30 p.m.11:00 p.m. – 7:30 a.m.Monday – Friday – 11:00 p.m. – 7:30 a.m. – 8-hour shift (Current Need) Bargaining unit position with OPS-464. In addition to a competitive salary ($32.49 an hour plus 10% shift differential) our full-time employees receive generous health and insurance benefits (medical, dental, vision, life insurance, etc.). Vacation and Paid Time Off, a company truck (utilized when on campus only), all tools as required (campus use only) and no on-call responsibility. Qualifications: High School Diploma or Equivalent required.Minimum of 3 years' experience working in commercial and residential settings in conjunction with post-high school technical training in relevant fields such as Heating, Ventilation and Air-Conditioning & Refrigeration Plumbing and Appliances. Or, six (6) years of relevant current work experience in an institutional and residential application.EPA Level 2 Refrigeration Certification minimum, Universal Certification a plusValid PA Driver’s License in good standing. CDL license a plus.OSHA 10-Hour Training. OSHA 30-Hour Training a plus.MEWP (Mobile Elevated Working Platform) Certification a plus.Backflow Prevention Device Tester Certification a plus.Demonstrated high degree of integrity, as all MHS Staff are role models for MHS Students.Candidates should be willing to actively engage with students.

General DentistMechanicsburg Family Dentistryis looking for a General Dentist to join our team.Why Heartland Dental As the leader of your supported office, you’ll receive best in class support to provide exceptional lifetime patient care while experiencing unparalleled educational offerings to enhance your elite clinical skills. You’ll work in an environment that encourages full clinical autonomy, with the ability to tap into a robust mentorship program and a network of more than 1600 supported doctors. You’ll work a schedule that inspires work life balance and receive competitive benefits, unlimited PTO and the opportunity to earn unlimited compensation. Lead your ideal practice, invest in your community, leave a legacy, and do it all with the support of Heartland Dental! What You’ll GainUnlimited PTO, paid holidays and continuing education, competitive benefits including health insurance and retirement savings plans Guaranteed base salary Uncapped earning potential Opportunity to build wealth by participating in Heartland Dental stock offerings You will have a full clinical team including a dental hygienist and dental assistant to support you in delivering lifetime patient careWorld class continuing education focused on helping you achieve the elite clinical skills you desireAbility to earn your FAGD through the Doctor Mastery Program which allows you to offer a broader menu of services to your patients Access to an expansive network of mentors with 1:1 mentorship support and networking opportunities available at your fingertipsUnparalleled business support and the highest quality technology, supplies, and labs means you’re in the driver’s seatYou’ll need to haveDDS/DMD degree, active and unrestricted license in state of PAClinical knowledge to practice comprehensive dentistry, including diagnosis and treatment of oral health issuesDesire to continue learning and grow clinical skills to meet needs of patientsAbility to become credentialed with dental insurance plansThe position will have access to minimum PHI necessary for performing job-related functions; regular HIPAA training, aligning with the specific role and responsibilities, will be required; and the individual will need to protect PHI and maintain data safeguards.Physical RequirementsAbility to perform essential duties satisfactorily with or without reasonable accommodation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the positionProlonged periods sitting and standingMust be able to lift and carry up to 45 pounds at timesAvailability to attend virtual training sessions (or in-person)periodically throughout the yearWho is Heartland Dental As the largest and one of the fastest growing Dental Support Organizations, Heartland Dental provides exceptional service to its more than 2,300 supported doctors in 38 states and over 1,400 supported offices. Each Heartland Dental supported office is unique to the community and the patients they serve. Supported Doctors are the leaders of their practice and set forth their own clinical care philosophies. With the largest network of doctors, we are founded by a doctor for doctors with a mission to support dentists and their teams as they deliver the highest quality dental care and experiences to the communities they serve while providing exceptional careers and creating value for our stakeholders.At Heartland Dental, we’re committed to living our core values which promote diversity and inclusion. We provide all employees and applicants for employment the protections of federal, state, and local laws affording equal opportunity in employment. As part of our commitment to maintaining a safe and healthy environment for both team members and patients, a tuberculosis (TB) test is required for all new hires in dental office positions. This is a standard requirement for dental office roles and must be completed prior to starting employment. The test will be arranged during the pre-employment process, and any necessary guidance or paperwork will be provided. Not applicable in the state of FL & TN.

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!We are a culture of family.Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law. Application Duration: To ensure a thorough and fair selection process, we would like to inform you that the application deadline for this position is (7(internal)-14 days from posting). Please ensure that your application is submitted by 01/05/2024 for consideration. To be considered for this position, you must complete the online application located at www.goblusky.com/careers.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do :Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technician and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do it :Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads.Manages assigned work to meet professional and efficient execution of time and customer satisfaction.Reportsproblems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner.Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals.Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work.Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to allcontrolstechnicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors.Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required.Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on non-complex, non-critical equipment.Compilesjob documentation, such as certificate of completion, customer training form, training certificates and punch lists.Conducts extensiveself-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing,commissioningand servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations,and billof material, network layouts and electrical schematics as required.Assists in the development and testing of software programs necessary to operate the system per the intent of the project requirements.Compiles and/or completes project as-built and close-out documentation.Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation.Selects, orders, and tracks the delivery of materials for assigned projects.Coordinatesfactory-mounting processes to meet factory and project schedule.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.May provide field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with project field team.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look for:RequiredVocational School four year program graduate, an Associate’s degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $82,500K Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:JOB DESCRIPTION- Automotive Technician NON CDLUPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. He/She will?maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations).?Automotive Technicians?must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you! Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.?UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided.?Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required,?throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Meets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A Commercial Driver's License (CDL) - PreferredWorks?full time shifts: 8-10 hours per day, 4-5 days per 7-day week Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions OTHER CRITERIAEmployer will not sponsor visas for position.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position is$38.37 per hour.For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase programEmployee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $82,500K Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently hiring a Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. Candidate requires sufficient electrical and mechanical knowledge and must pass online and hands-on assessment.Responsibilities and DutiesTroubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encodersInspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer platesInspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coilsInspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumpsWelding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of workPerforming preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $37.73 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment