We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

We are looking for General Laborers to join our team!
The general laborer will load and unload supplies and equipment for company trucks, perform flagging out on roads and job sites, prepare orders for jobs.
Make sure trucks are loaded with proper equipment for set tasks. Set -up signs, cones, etc. around the work area to divert traffic. Preform other work-related duties as assigned. Works out in the field performing flagging duties for traffic control Ensure all safety rules and procedures are adhered to at all times. Perform other work-related duties as assigned. Excellent attendance required, dependable transportation, good work ethic.
Benefits: Weekly Pay Medical Dental Vision HSA 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Must have a valid Driver's License and be 21 years of age or older. Ability to understand and follow directions as given. Ability to lift and carry 50 pounds or more easily throughout the shift. Must be able to pass a background check, MVR and drug test.
We are an Equal Employment Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, gender, national origin, disability, or veteran status.

We are looking for a team player to join our team and provide support in the Sign Shop.
Sign Shop Support is responsible for assisting in the production, assembly, and installation of traffic signs. This includes operating machinery, maintaining inventory, preparing work orders, and ensuring compliance with regulatory standards. The position involves collaborating with team members, maintaining a clean work environment, and supporting the sign shop's operations to ensure timely project completion.
Gather, lift, and carry inventory items such as reflective sheeting, aluminum blanks, tools, and finished signs. Set up and utilize sign maker computer to produce cut letters of various sizes; mark, position, and apply letters to sign faces. Operate squeeze roll machine and count incoming aluminum blanks for storage. Measure and cut aluminum and composite sheets to required dimensions, trim edges of sheeted sign blanks. Fabricate aluminum and construction signs, including custom layouts for silk screen and printing processes. Read and understand sign order requirements from sales orders and verbal instructions. Clean signs after fabrication and maintain clean work areas. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer Growth Potential
Qualifications: Previous experience in sign production preferred. Must be able to pass a background check. Must successfully pass a drug test and meet federal DOT requirements. Must have excellent attendance, reliable transportation, and a strong work ethic. Ability to comprehend and follow detailed instructions accurately. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Must be well organized. Ability to lift 50 pounds.
We are an Equal Employment Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, gender, national origin, disability, or veteran status.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive PayPaid vacation, holidays, and sick time -Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Check us out: A Day in the Life of the Building of the Future - https://youtu.be/pdZMNrDJviY]Check us Out: A Day in a Life at Johnson ControlsPlant Operations https://youtu.be/cjZpE51xySYWhat you will doSuccessful applicants will have a good understanding of standard technical principles, theories, concepts, techniques, and processes. Has a working knowledge of AutoCAD and Drafting standards and applies them towards the execution of Sales Orders or ECNs. Capable of creating and modifying diagrams, piece part drawings and simple assemblies. Has a basic understanding of electrical symbology, geometric dimensioning, and tolerance principles.How you will do itRead and understand technical drawings of components such as instruments, control panels, starters, etc.Work with Engineers, other design personnel and shop personnel to insure proper design.Develop wiring diagrams using AutoCAD Electrical 2024 (Bentley, Plant 3D or Inventor experience a plus).Develop 2D plan, elevation and section drawings of control panels using AutoCAD Electrical. Includes mounting components, terminal blocks, associative dimensioning and avoiding interference between equipment.Develop and implement designs for conduit and/or cable tray installations.Develop bills of material using MS Access database and web-based configuration tools.Check other drawings (peer checking).Work with Operations group personnel to answer questions, make corrections, etc.The ability to multitask and an attention to detail are a must.RequiredRequires an AS degree or equivalent from college or technical school or two (2) years related experience in electrical machinery design. Requires CAD education or equivalent experience. Personal computer working capabilities include email, browser, MS Word, MS Excel, etc.About Us: Johnson Controls is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's What We HaveToOfferWhat we offerCompetitive pay Paid vacation/holidays/sick time 10 days of vacation firstyear!Comprehensive benefits package including 401K, medical, dental, and vision careAvailable day one!Extensive product and on-the-job/cross-training opportunitiesWithoutstanding internal resources!Encouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, tools, and equipmentprovidedto complete all jobs.JCI Employee discount programs (The Loop by Perk Spot)Check us Out:A Day in the Life of the Building of the FutureHow you will do it:Creation Contract Specific Bills of Material and Part Requisitions.Completion and release of Food and beverage Quantum Panel Sales Order engineering.Completion and release of YPS Quantum Retrofit Panel Sales Order engineering.Load order specific information into Access Data base related to Panel Sales Orders.Creation Contract Specific electrical schematics and panel assembly drawings.Check and Approve drawings and bills generated by engineering co-workers consisting with ISO requirements.What we look for:Associate Degree or 3 years’ experience in Electrical Controls or Industrial Refrigeration.Microsoft Office 365Proficient in Excel and AccessPreferredAutocad / Autocad Electrical ExperienceRead and understand technical drawings of components such as instruments, control panels, starters, etc.JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Physical Therapist Career Opportunity PRN Positions NOW available Join a Team That Puts Your Passion for Care FirstAre you seeking a fulfilling career that feels like home and lets you make a meaningful impact At Encompass Health, you'll find an opportunity to provide exceptional care and support to our patients, witnessing their remarkable progress firsthand. As a Physical Therapist, your specialized skills will help deliver high-quality, compassionate care, allowing you the time to deeply understand and guide patients on their rehabilitation journey. Our well-equipped physical therapy gyms, backed by the latest technology, foster a supportive, driven, and welcoming environment. From day one, you'll experience a rewarding career and comprehensive benefits that prioritize your peace of mind and professional growth. Welcome to a place where your passion for care fuels remarkable progress and fulfillment. A Glimpse into Our WorldWhether you're at the early stages of your career, seeking to build a strong foundation, or an experienced Physical Therapist in search of a better environment to call home, you'll experience the difference the moment you become a part of our team. Being at Encompass Health means being with a growing national inpatient rehabilitation leader. We take immense pride in our career growth opportunities and how our team collaborates for the greater good of our patients. Our achievements, including being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, make us truly remarkable. Our Commitment to YouOur benefits are designed to support your well-being and start on day one:Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.Generous paid time off that accrues over time.Tuition reimbursement and continuous education opportunities for your professional advancement.Company-matching 401(k) and employee stock purchase plans for a secure financial future.Flexible spending and health savings accounts tailored to your unique needs.A community of individuals passionate about what they do. Be the Physical Therapist You've Always Aspired to BeYour journey involves:Providing direct inpatient care to patients in need of physical therapy.Supervising care and treatments, leading patient assessments, creating personalized care plans, and addressing patient concerns.Building meaningful relationships with patients by taking the time to understand their physical, mental, and emotional needs to support their recovery.Celebrating every victory along the way. QualificationsCurrent licensure or certification as required by state regulations.CPR certification.Master's Degree preferred, or Bachelor's Degree plus sufficient experience in the field. The Encompass Health WayWe proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing!At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.We're eager to meet you, and we truly mean that. Join our family, and let's make a difference together!