We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

We are looking for an experienced Traffic Control Technician to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer Growth Potential
Qualifications: Valid Driver’s License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, gender, national origin, disability, or veteran status.

We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. Being number one means WM invests in our Sales teams success by providing access to state-of-the-art systems and processes, industry-leading services and the best leadership in the business. Our exceptional sales professionals help deliver satisfaction to our clients throughout North America. If you are passionate about helping others and seeking challenging and interesting employment, apply today!I. Job SummaryGenerates revenue growth by utilizing a consultative selling approach in the retention of current WM customers. Manages existing business relationships in order to achieve budgeted sales goals by developing and implementing sound retention strategies, utilizing strong negotiation efforts to preserve business, and securing contract agreements from previously non-contracted customers. The Account Manager will save, secure, and convert by handling all customer cancellation requests, providing ongoing education of contract details to existing customers, and by obtaining customer contract commitments during face-to-face interactions. All escalations for customer service within the defined territory will be resolved through this position.II. Essential Duties and Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Managing business to business sales relationships. Developing detailed proposals encompassing multiple services. Researching aspects of the waste and environmental services business. Attending conferences/symposiums as a means of networking and staying current with industry-and market-related information. Assignment management. Building trusting relationships. Providing high-impact Communication. Able to identify pertinent Local, County, State, and/or Federal government regulations. Responsible for prospecting and closing to achieve budgeted sales goals by developing and implementing sound selling strategies that ensure revenue growth by selling to new customers only. Manage prospects by developing sound marketing plans and maintaining key information in the prospect database. Reduces lost major accounts by diffusing cancellation requests. Meets or exceeds sales call activity goals for proactive account retention. Increases revenue and profitability by executing sound plans on retention calls to improve the customers service and/or profitability. Matches WM services with customer needs by demonstrating knowledge of customers, pricing and competition; effectively communicates pricing and service strategies; proactively engages other WM business opportunities, referring internally as appropriate. Effectively use WM sales productivity software tools (i.e. Prospect and Customer Database, Proposal Program, Pricing Tools, etc.). Proposes customer solutions that are compliant with appropriate local, state and federal regulations. Devising sales approaches and solutions. Marshalling resources. Sales negotiation. Sales opportunity analysis. III. Supervisory ResponsibilitiesThis job has no supervisory duties.IV. QualificationsThe requirements listed below are representative of the qualifications necessary to perform the job.A. Education and ExperienceEducation: Bachelor's Degree (accredited) or in lieu of degree, High School Diploma or GED (accredited) and 4-years sales experience.Experience: 1 year work experience (in addition to education requirement) in direct business-to-business sales, and phone-based business-to-business prospecting resulting in successfully obtaining customer appointmentsB. Certificates, Licenses, Registrations or Other Requirements-Preferred 20 hours of training with Resource Conservation and recovery Act (RCRA) Certifications: WM CRA Involved in one or more of the following: U.S. green Build council (USGBC), American Institute of Architects (AIA), Associated general Contractors of America (AGC), Building Owners and Managers Association (BOMA), or National Association of Home Builder. C. Other Knowledge, Skills or Abilities RequiredAbility to convert customer cancellation requests in order to maintain revenue levels, and/or complex negotiations skills required. General Competencies Include: Comprehensive understanding of construction industry (phases, materials, waste, etc.). Techniques for identifying and managing new business opportunities Techniques for identifying and responding to objections Techniques for bypassing Gatekeepers Understands the competitive landscape in the local area Understands Green influences and sustainability Analyze and solve problems Conduct formal presentations Able to design customized solutions that address more than just waste services Excellent business and communication skills Understands how to calculate price and amounts such as discounts Basic software and web-based applications Active Learning Sales Disposition Motivational Fit Sustainability V. Work EnvironmentListed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Normal setting for this job is: office setting and/or outside sales. The expected base pay range for this position is $60,000-$64,000, plus monthly commisson. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factor.BenefitsAt WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site.If this sounds like the opportunity that you have been looking for, please click "Apply."

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Job ID NumberR5133Employment TypeFull timeWorksite FlexibilityHybridJob SummaryPEGA Certified Lead System Architect will lead multiple teams consisting of developers, subject matter experts and stakeholders to convert the business requirements, business process flow, use cases into fully functional applicationJob DescriptionWe are seeking a PEGA Certified Lead System Architectto join our IT team. This position will befull-time, Hybrid , and is a contract positionfor 12 months.Candidates will be asked to come into the office 2 Days / WeekJob City: TrentonJob State: New JerseyJob ZIP Code: 08625Must have 3 years of experience POST PEGA Lead System Architect Certification and a Minimum of 7 years work experience Post PEGA SSA Certification.What You'll DoMeet with end users and technical staff of all types to gather and document business and system requirementsPropose comprehensive solutions based on business and technical requirementsPerform multiple roles as needed during the course of the projectParticipate in Agile software development sprints and sprint planning activitiesLead agile teams and processes as necessaryDefine solution acceptance criteria and assist in software testingPublish software release notes and maintain other product documentationMentor Software Development team members as neededIntegrate best practices into current PEGA development proceduresLead client workshops around software products and processesParticipate in and provide support to customer success teamsDevelop standards, repeatable processes, and reusable componentsAssists in project planning, including developing of timelines, composition of technical teams and leveling of resourcesMentor business and technical team members on processes and standards to promote consistency and improve productivityAssist in the development and review of technical deliverables on projectsWhat You'll Need A minimum of 7 years of PEGA Lead DevelopmentA minimum of 7 Use Case DevelopmentA minimum of 7 Years DB2, SQL ServerWorking with users/stakeholders and Lead Business Architect to understand and capture software solution needsHands-on configuration and deployment of software solutions at the enterprise level.Experience using PEGA Smart BPMExperience using PEGA PMFExperience using PEGA Direct Capture of Objectives - DCOUse Case design and DevelopmentDatabase - DB2 and Stored ProceduresPEGA Post SSA certification ExperiencePEGA Certified Lead LSA certificationExperience in mentoring team membersSoftware development Life cycle and Agile MethodologyStrong Web Design and application developmentConverting business into PEGA process flow4-year college degree or equivalent technical studyPhysical DemandsAbility to safely and successfully perform the essential job functions consistent with the ADA and other federal, state, and local standardsSedentary work that involves sitting or remaining stationary most of the time with occasional need to move around the office to attend meetings, etc.Ability to conduct repetitive tasks on a computer, utilizing a mouse, keyboard, and monitorReasonable Accommodation StatementIf you require a reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employment selection process, please direct your inquiries to or (888) 824 – 8111.Equal Employment Opportunity Policy StatementCAI is committed to equal employment opportunity. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability, or veteran status. All employment decisions are based on valid job requirements, including hiring, promotion, and compensation. Harassment and retaliation are prohibited.

Job ID NumberR4981Employment TypeFull timeWorksite FlexibilityHybridJob SummaryThe Lead Tech Architect will lead technical project design and implementation. Significant expertise in Salesforce, AWS, & Snowflake (Data Warehouse) is ideal, will work closely with cross-functional teams to ensure project success.Job DescriptionWe are seeking a highly skilled and experienced Software Architect to join our IT team. This position will be full-time, hybrid, and is a contract position. 3 Days on-siteJob City: TrentonJob State: New JerseyJob ZIP Code: 08625What You'll Do Lead the design, development, and implementation of scalable and reliable technical architectures that meet business requirementsOversee multiple projects, ensuring timely delivery and adherence to project scope and budget. Provide technical guidance to project teamsUtilize significant experience with at least two of the following tools: Salesforce, AWS, Snowflake, or other comparable technologies, to drive project successWork closely with stakeholders, including business analysts, developers, and project managers, to gather requirements and translate them into technical specificationsDevelop and maintain a technical roadmap that aligns with the organization's goals and objectives. Propose improvements and innovative solutionsImplement strategies for optimizing system performance, scalability, and security. Conduct regular reviews and assessmentsEnsure thorough documentation of architecture, design decisions, and system configurations. Maintain adherence to industry standards and best practicesProvide technical leadership and mentorship to junior architects and development teams. Foster a culture of continuous learning and improvementOversee the integration of various systems and technologies to ensure seamless operation and data flow. Conduct integration testing and validationIdentify potential risks and develop mitigation strategies to address them proactively. Conduct regular risk assessmentsWhat You'll NeedBachelor's or master's degree in computer science, information technology, or a related field10 + year of overall technical architect experience8+ years proven experience as an integration architect with a focus on Salesforce, Snowflake (or similar cloud data warehouse ), AWS, ETL tools, and Business Rules EnginesStrong knowledge of integration patterns, API design, and data integration strategiesProficiency in programming languages (e.g., Python), database systems, and middleware technologiesExperience with cloud-based integration platforms and servicesExcellent problem-solving and analytical skillsExceptional communication and interpersonal skillsStrong project management and leadership abilitiesA deep understanding of data governance, security, and complianceDesiredCertification in relevant technologies (e.g., Salesforce, Snowflake, AWS) is a plusPhysical DemandsAbility to safely and successfully perform the essential job functions consistent with the ADA and other federal, state, and local standardsSedentary work that involves sitting or remaining stationary most of the time with occasional need to move around the office to attend meetings, etc.Ability to conduct repetitive tasks on a computer, utilizing a mouse, keyboard, and monitorReasonable Accommodation StatementIf you require a reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employment selection process, please direct your inquiries to or (888) 824 – 8111.Equal Employment Opportunity Policy StatementIt is the policy of CAI not to discriminate against any employee or applicant due to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or being a protected veteran. It is also the policy of CAI to take affirmative action to employ and to advance in employment, all persons regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or being a protected veteran, and to base all employment decisions only on valid job requirements. This policy shall apply to all employment actions, including but not limited to recruitment, hiring, upgrading, promotion, transfer, demotion, layoff, recall, termination, rates of pay or other forms of compensation and selection for training, including apprenticeship, at all levels of employment. Employees and applicants of CAI will not be subject to harassment due to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or being a protected veteran. Additionally, retaliation, including intimidation, threats, or coercion, because an employee or applicant has objected to discrimination, engaged or may engage in filing a complaint, assisted in a review, investigation, or hearing or have otherwise sought to obtain their legal rights under any Federal, State, or local EEO law is prohibited.

We are looking for an experienced Traffic Control Technician to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer Growth Potential
Qualifications: Valid Driver’s License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, gender, national origin, disability, or veteran status.

Kemper Equipment is seeking an experienced Structural Engineer to join our dynamic team of engineers and technical experts. This role provides an exciting opportunity to contribute to innovative projects in a collaborative environment. As a Structural Engineer, you will work closely with mechanical engineers, designers and fabrication teams to design, estimate and manage complex structural projects from inception to completion.
This role can be remote, but local candidates may work in-office if desired. Remote candidates must have the ability to work effectively from home. Relocation Assistance is not available.
Salary is competitive and based on experience, qualifications and the outcome of the interview process.
Key Responsibilities: Lead structural engineering efforts, including interpreting specifications, performing structural analysis, designing components, and resolving issues during manufacturing and installation. Perform advanced design calculations to select structural steel members, systems, and foundations, ensuring compliance with AISC standards. Develop, analyze, and interpret structural models using RISA-3D and AutoCAD 3D, integrating seamlessly with other project components. Prepare and oversee steel shop drawings and layout approval drawings, ensuring adherence to company and industry standards. Utilize MS Excel to create and manage complex design spreadsheets. Collaborate with mechanical engineers and designers to ensure proper interfaces between structures and equipment. Support Estimating and Sales teams by providing structural insights during project proposals. Coordinate with geotechnical, process, mechanical, and electrical engineering teams and consultants to ensure project success. Conduct site visits to evaluate existing structures and gather measurements for the integration of new equipment. Work with fabrication teams to address and resolve structural challenges during manufacturing. Contribute to the development and maintenance of standard details, models, and specifications.
Qualifications: Bachelor’s Degree in Civil, Structural, or Mechanical Engineering (required). Minimum of 3 years of experience in the Structural and/or Civil Engineering field. Advanced knowledge of AISC, AWS, OSHA, and MSHA standards. Proficiency with structural design software, including RISA-3D (or similar), and AutoCAD (3D modeling, design, and 2D drawing creation). Expertise in structural design involving steel and concrete materials. Strong understanding of structural steel detailing and concrete foundation principles. Professional Engineer (PE) license (preferred). Solid skills in Microsoft Excel, Word, and the full MS Office Suite (Word, Excel, Outlook, etc.). Clear and effective communication skills with a results-oriented mindset. Self-motivated, proactive, and capable of managing tasks independently. Familiarity with industries such as mining, quarrying, or conveyor systems is highly valued. Must be legally authorized to work in the United States without sponsorship. Experience in the Bulk Material Handling industry is strongly preferred but not required. Strong mechanical aptitude and broad-based machine knowledge are helpful.
Key Competencies: Ability to visualize projects in both 2D and 3D. Skilled in reading and interpreting blueprints and technical drawings. Strong mathematical skills for accurate calculations and estimates. Excellent organizational skills with the ability to multitask and manage time effectively. High attention to detail, accuracy, and a strong sense of urgency. Problem-solving abilities with logical reasoning and prioritization skills. Exceptional written and verbal communication abilities.

We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.